Message ID | 1417174791-7339-4-git-send-email-inki.dae@samsung.com (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
On 2014? 11? 28? 20:39, Inki Dae wrote: > This patch adds MIPI-DSI and MIPI-DSI based S6E63J0X03 AMOLED panel > device nodes for Exynos3250 Rinato board. Hi Mr. Kukjin, Please, ping~ Thanks, Inki Dae > > Signed-off-by: Inki Dae <inki.dae@samsung.com> > Acked-by: Kyungmin Park <kyungmin.park@samsung.com> > --- > arch/arm/boot/dts/exynos3250-rinato.dts | 59 +++++++++++++++++++++++++++++++ > 1 file changed, 59 insertions(+) > > diff --git a/arch/arm/boot/dts/exynos3250-rinato.dts b/arch/arm/boot/dts/exynos3250-rinato.dts > index 79aa916..6e0e90d 100644 > --- a/arch/arm/boot/dts/exynos3250-rinato.dts > +++ b/arch/arm/boot/dts/exynos3250-rinato.dts > @@ -125,6 +125,65 @@ > }; > }; > > +&dsi_0 { > + vddcore-supply = <&ldo6_reg>; > + vddio-supply = <&ldo6_reg>; > + samsung,pll-clock-frequency = <24000000>; > + status = "okay"; > + > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > + > + port@1 { > + reg = <1>; > + > + dsi_out: endpoint { > + remote-endpoint = <&dsi_in>; > + samsung,burst-clock-frequency = <250000000>; > + samsung,esc-clock-frequency = <20000000>; > + }; > + }; > + }; > + > + panel@0 { > + compatible = "samsung,s6e63j0x03"; > + reg = <0>; > + vdd3-supply = <&ldo16_reg>; > + vci-supply = <&ldo20_reg>; > + reset-gpios = <&gpe0 1 0>; > + te-gpios = <&gpx0 6 0>; > + power-on-delay= <30>; > + power-off-delay= <120>; > + reset-delay = <5>; > + init-delay = <100>; > + flip-horizontal; > + flip-vertical; > + panel-width-mm = <29>; > + panel-height-mm = <29>; > + > + display-timings { > + timing-0 { > + clock-frequency = <0>; > + hactive = <320>; > + vactive = <320>; > + hfront-porch = <1>; > + hback-porch = <1>; > + hsync-len = <1>; > + vfront-porch = <150>; > + vback-porch = <1>; > + vsync-len = <2>; > + }; > + }; > + > + port { > + dsi_in: endpoint { > + remote-endpoint = <&dsi_out>; > + }; > + }; > + }; > +}; > + > &fimd { > status = "okay"; > > -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/arch/arm/boot/dts/exynos3250-rinato.dts b/arch/arm/boot/dts/exynos3250-rinato.dts index 79aa916..6e0e90d 100644 --- a/arch/arm/boot/dts/exynos3250-rinato.dts +++ b/arch/arm/boot/dts/exynos3250-rinato.dts @@ -125,6 +125,65 @@ }; }; +&dsi_0 { + vddcore-supply = <&ldo6_reg>; + vddio-supply = <&ldo6_reg>; + samsung,pll-clock-frequency = <24000000>; + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + reg = <1>; + + dsi_out: endpoint { + remote-endpoint = <&dsi_in>; + samsung,burst-clock-frequency = <250000000>; + samsung,esc-clock-frequency = <20000000>; + }; + }; + }; + + panel@0 { + compatible = "samsung,s6e63j0x03"; + reg = <0>; + vdd3-supply = <&ldo16_reg>; + vci-supply = <&ldo20_reg>; + reset-gpios = <&gpe0 1 0>; + te-gpios = <&gpx0 6 0>; + power-on-delay= <30>; + power-off-delay= <120>; + reset-delay = <5>; + init-delay = <100>; + flip-horizontal; + flip-vertical; + panel-width-mm = <29>; + panel-height-mm = <29>; + + display-timings { + timing-0 { + clock-frequency = <0>; + hactive = <320>; + vactive = <320>; + hfront-porch = <1>; + hback-porch = <1>; + hsync-len = <1>; + vfront-porch = <150>; + vback-porch = <1>; + vsync-len = <2>; + }; + }; + + port { + dsi_in: endpoint { + remote-endpoint = <&dsi_out>; + }; + }; + }; +}; + &fimd { status = "okay";