| Message ID | 1423813734-20664-1-git-send-email-a.hajda@samsung.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Hello Andrzej, On Fri, Feb 13, 2015 at 8:48 AM, Andrzej Hajda <a.hajda@samsung.com> wrote: > The patch adds gpio for detecting presence of MMC card. > It fixes issue with kernel hang due when MMC card is missing. Maybe s/MMC/eMMC here? to make more clear that this patch is solving an issue when the eMMC and not the uSD is missing. > > Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> > --- > Hi, > > This is just resend of the patch with added mmc ML and dw-mmc maintainers. > > Javier, I have no access to peach-pi(t) schematics, so I do not know if they > have mmc-cd line connected to gpc0-2 gpio, but I guess it could be the case. > You could check if similar patches will fix the issue for them. > Yes, both the eMMC and uSD card detection lines in the Peach Pit/Pi are connected to the XMMC0CDN and XMMC2CDN built-in CD# pins so is the same than the Odroid XU3 if I read the schematics correctly since the those pins are also GPC0_2 and GPC2_2. Now, in the Peach Pit Chromebook the eMMC is not removable so card detection is not an issue there, the problem I'm having is that card detection for the uSD seems to be broken after adding Addy's patches: mmc: dw_mmc: fix bug that cause 'Timeout sending command' mmc: dw_mmc: Don't start command while data busy And adding a cd-gpios property with a phandle to gpc2_2 to the mmc2 device node does not help. But without those patches, I've timeouts when mmc commands are sent to the SDIO slot which has the wifi chip connected to. > Regards > Andrzej > > arch/arm/boot/dts/exynos5422-odroidxu3.dts | 5 +++-- > 1 file changed, 3 insertions(+), 2 deletions(-) > > diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3.dts b/arch/arm/boot/dts/exynos5422-odroidxu3.dts > index 47ec9bf..a563811 100644 > --- a/arch/arm/boot/dts/exynos5422-odroidxu3.dts > +++ b/arch/arm/boot/dts/exynos5422-odroidxu3.dts > @@ -11,6 +11,7 @@ > */ > > /dts-v1/; > +#include <dt-bindings/gpio/gpio.h> > #include "exynos5800.dtsi" > > / { > @@ -355,13 +356,13 @@ > > &mmc_0 { > status = "okay"; > - broken-cd; > + cd-gpios = <&gpc0 2 GPIO_ACTIVE_LOW>; > card-detect-delay = <200>; > samsung,dw-mshc-ciu-div = <3>; > samsung,dw-mshc-sdr-timing = <0 4>; > samsung,dw-mshc-ddr-timing = <0 2>; > pinctrl-names = "default"; > - pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>; > + pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8 &sd0_cd>; > bus-width = <8>; > cap-mmc-highspeed; > }; > -- Your patch looks good to me though from what I've seen in the Odroid XU3 schematic and taking into account that the eMMC can be removed in that board. Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Best regards, Javier -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
W dniu 13.02.2015 o 19:03, Javier Martinez Canillas pisze: > Hello Andrzej, > > On Fri, Feb 13, 2015 at 8:48 AM, Andrzej Hajda <a.hajda@samsung.com> wrote: >> The patch adds gpio for detecting presence of MMC card. >> It fixes issue with kernel hang due when MMC card is missing. > > Maybe s/MMC/eMMC here? to make more clear that this patch is solving > an issue when the eMMC and not the uSD is missing. > >> >> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> >> --- >> Hi, >> >> This is just resend of the patch with added mmc ML and dw-mmc maintainers. >> >> Javier, I have no access to peach-pi(t) schematics, so I do not know if they >> have mmc-cd line connected to gpc0-2 gpio, but I guess it could be the case. >> You could check if similar patches will fix the issue for them. >> > > Yes, both the eMMC and uSD card detection lines in the Peach Pit/Pi > are connected to the XMMC0CDN and XMMC2CDN built-in CD# pins so is the > same than the Odroid XU3 if I read the schematics correctly since the > those pins are also GPC0_2 and GPC2_2. > > Now, in the Peach Pit Chromebook the eMMC is not removable so card > detection is not an issue there, the problem I'm having is that card > detection for the uSD seems to be broken after adding Addy's patches: > > mmc: dw_mmc: fix bug that cause 'Timeout sending command' > mmc: dw_mmc: Don't start command while data busy > > And adding a cd-gpios property with a phandle to gpc2_2 to the mmc2 > device node does not help. > > But without those patches, I've timeouts when mmc commands are sent to > the SDIO slot which has the wifi chip connected to. > >> Regards >> Andrzej >> >> arch/arm/boot/dts/exynos5422-odroidxu3.dts | 5 +++-- >> 1 file changed, 3 insertions(+), 2 deletions(-) >> >> diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3.dts b/arch/arm/boot/dts/exynos5422-odroidxu3.dts >> index 47ec9bf..a563811 100644 >> --- a/arch/arm/boot/dts/exynos5422-odroidxu3.dts >> +++ b/arch/arm/boot/dts/exynos5422-odroidxu3.dts >> @@ -11,6 +11,7 @@ >> */ >> >> /dts-v1/; >> +#include <dt-bindings/gpio/gpio.h> >> #include "exynos5800.dtsi" >> >> / { >> @@ -355,13 +356,13 @@ >> >> &mmc_0 { >> status = "okay"; >> - broken-cd; >> + cd-gpios = <&gpc0 2 GPIO_ACTIVE_LOW>; >> card-detect-delay = <200>; >> samsung,dw-mshc-ciu-div = <3>; >> samsung,dw-mshc-sdr-timing = <0 4>; >> samsung,dw-mshc-ddr-timing = <0 2>; >> pinctrl-names = "default"; >> - pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>; >> + pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8 &sd0_cd>; >> bus-width = <8>; >> cap-mmc-highspeed; >> }; >> -- > > Your patch looks good to me though from what I've seen in the Odroid > XU3 schematic and taking into account that the eMMC can be removed in > that board. > > Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Hi Andrzej, The patch no longer applies cleanly, so could you re-spin it with Javier's tag above? Best regards, Krzysztof -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3.dts b/arch/arm/boot/dts/exynos5422-odroidxu3.dts index 47ec9bf..a563811 100644 --- a/arch/arm/boot/dts/exynos5422-odroidxu3.dts +++ b/arch/arm/boot/dts/exynos5422-odroidxu3.dts @@ -11,6 +11,7 @@ */ /dts-v1/; +#include <dt-bindings/gpio/gpio.h> #include "exynos5800.dtsi" / { @@ -355,13 +356,13 @@ &mmc_0 { status = "okay"; - broken-cd; + cd-gpios = <&gpc0 2 GPIO_ACTIVE_LOW>; card-detect-delay = <200>; samsung,dw-mshc-ciu-div = <3>; samsung,dw-mshc-sdr-timing = <0 4>; samsung,dw-mshc-ddr-timing = <0 2>; pinctrl-names = "default"; - pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>; + pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8 &sd0_cd>; bus-width = <8>; cap-mmc-highspeed; };
The patch adds gpio for detecting presence of MMC card. It fixes issue with kernel hang due when MMC card is missing. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> --- Hi, This is just resend of the patch with added mmc ML and dw-mmc maintainers. Javier, I have no access to peach-pi(t) schematics, so I do not know if they have mmc-cd line connected to gpc0-2 gpio, but I guess it could be the case. You could check if similar patches will fix the issue for them. Regards Andrzej arch/arm/boot/dts/exynos5422-odroidxu3.dts | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)