| Message ID | 1424753815-15113-2-git-send-email-cw00.choi@samsung.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Tue, Feb 24, 2015 at 01:56:54PM +0900, Chanwoo Choi wrote: > This patch fixes the wrong control of PD_DET_EN (power down detection mode) > for Exynos7 because exynos7_tmu_control() always enables the power down detection > mode regardless 'on' parameter. > > Cc: Zhang Rui <rui.zhang@intel.com> > Cc: Eduardo Valentin <edubezval@gmail.com> > Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Lukasz, Any objections to this code? BR, Eduardo Valentin > --- > drivers/thermal/samsung/exynos_tmu.c | 3 ++- > 1 file changed, 2 insertions(+), 1 deletion(-) > > diff --git a/drivers/thermal/samsung/exynos_tmu.c b/drivers/thermal/samsung/exynos_tmu.c > index 933cd80..a60f527 100644 > --- a/drivers/thermal/samsung/exynos_tmu.c > +++ b/drivers/thermal/samsung/exynos_tmu.c > @@ -682,6 +682,7 @@ static void exynos7_tmu_control(struct platform_device *pdev, bool on) > > if (on) { > con |= (1 << EXYNOS_TMU_CORE_EN_SHIFT); > + con |= (1 << EXYNOS7_PD_DET_EN_SHIFT); > interrupt_en = > (of_thermal_is_trip_valid(tz, 7) > << EXYNOS7_TMU_INTEN_RISE7_SHIFT) | > @@ -704,9 +705,9 @@ static void exynos7_tmu_control(struct platform_device *pdev, bool on) > interrupt_en << EXYNOS_TMU_INTEN_FALL0_SHIFT; > } else { > con &= ~(1 << EXYNOS_TMU_CORE_EN_SHIFT); > + con &= ~(1 << EXYNOS7_PD_DET_EN_SHIFT); > interrupt_en = 0; /* Disable all interrupts */ > } > - con |= 1 << EXYNOS7_PD_DET_EN_SHIFT; > > writel(interrupt_en, data->base + EXYNOS7_TMU_REG_INTEN); > writel(con, data->base + EXYNOS_TMU_REG_CONTROL); > -- > 1.8.5.5 >
Hi Abhilash, > This patch fixes the wrong control of PD_DET_EN (power down detection > mode) for Exynos7 because exynos7_tmu_control() always enables the > power down detection mode regardless 'on' parameter. > > Cc: Zhang Rui <rui.zhang@intel.com> > Cc: Eduardo Valentin <edubezval@gmail.com> > Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> > --- > drivers/thermal/samsung/exynos_tmu.c | 3 ++- > 1 file changed, 2 insertions(+), 1 deletion(-) > > diff --git a/drivers/thermal/samsung/exynos_tmu.c > b/drivers/thermal/samsung/exynos_tmu.c index 933cd80..a60f527 100644 > --- a/drivers/thermal/samsung/exynos_tmu.c > +++ b/drivers/thermal/samsung/exynos_tmu.c > @@ -682,6 +682,7 @@ static void exynos7_tmu_control(struct > platform_device *pdev, bool on) > if (on) { > con |= (1 << EXYNOS_TMU_CORE_EN_SHIFT); > + con |= (1 << EXYNOS7_PD_DET_EN_SHIFT); > interrupt_en = > (of_thermal_is_trip_valid(tz, 7) > << EXYNOS7_TMU_INTEN_RISE7_SHIFT) | > @@ -704,9 +705,9 @@ static void exynos7_tmu_control(struct > platform_device *pdev, bool on) interrupt_en << > EXYNOS_TMU_INTEN_FALL0_SHIFT; } else { > con &= ~(1 << EXYNOS_TMU_CORE_EN_SHIFT); > + con &= ~(1 << EXYNOS7_PD_DET_EN_SHIFT); > interrupt_en = 0; /* Disable all interrupts */ > } > - con |= 1 << EXYNOS7_PD_DET_EN_SHIFT; > > writel(interrupt_en, data->base + EXYNOS7_TMU_REG_INTEN); > writel(con, data->base + EXYNOS_TMU_REG_CONTROL); Could you test this patch if it isn't introducing any regression on your HW?
Hi Lukasz, On Wed, Feb 25, 2015 at 2:33 PM, Lukasz Majewski <l.majewski@samsung.com> wrote: > Hi Abhilash, > >> This patch fixes the wrong control of PD_DET_EN (power down detection >> mode) for Exynos7 because exynos7_tmu_control() always enables the >> power down detection mode regardless 'on' parameter. >> >> Cc: Zhang Rui <rui.zhang@intel.com> >> Cc: Eduardo Valentin <edubezval@gmail.com> >> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> >> --- >> drivers/thermal/samsung/exynos_tmu.c | 3 ++- >> 1 file changed, 2 insertions(+), 1 deletion(-) >> >> diff --git a/drivers/thermal/samsung/exynos_tmu.c >> b/drivers/thermal/samsung/exynos_tmu.c index 933cd80..a60f527 100644 >> --- a/drivers/thermal/samsung/exynos_tmu.c >> +++ b/drivers/thermal/samsung/exynos_tmu.c >> @@ -682,6 +682,7 @@ static void exynos7_tmu_control(struct >> platform_device *pdev, bool on) >> if (on) { >> con |= (1 << EXYNOS_TMU_CORE_EN_SHIFT); >> + con |= (1 << EXYNOS7_PD_DET_EN_SHIFT); >> interrupt_en = >> (of_thermal_is_trip_valid(tz, 7) >> << EXYNOS7_TMU_INTEN_RISE7_SHIFT) | >> @@ -704,9 +705,9 @@ static void exynos7_tmu_control(struct >> platform_device *pdev, bool on) interrupt_en << >> EXYNOS_TMU_INTEN_FALL0_SHIFT; } else { >> con &= ~(1 << EXYNOS_TMU_CORE_EN_SHIFT); >> + con &= ~(1 << EXYNOS7_PD_DET_EN_SHIFT); >> interrupt_en = 0; /* Disable all interrupts */ >> } >> - con |= 1 << EXYNOS7_PD_DET_EN_SHIFT; >> >> writel(interrupt_en, data->base + EXYNOS7_TMU_REG_INTEN); >> writel(con, data->base + EXYNOS_TMU_REG_CONTROL); > > Could you test this patch if it isn't introducing any regression on your > HW? The patch does not cause any regression on exynos7 and seems logically correct. Tested-by: Abhilash Kesavan <a.kesavan@samsung.com> Regards, Abhilash > > -- > Best regards, > > Lukasz Majewski > > Samsung R&D Institute Poland (SRPOL) | Linux Platform Group -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Eduardo, > Hi Lukasz, > > On Wed, Feb 25, 2015 at 2:33 PM, Lukasz Majewski > <l.majewski@samsung.com> wrote: > > Hi Abhilash, > > > >> This patch fixes the wrong control of PD_DET_EN (power down > >> detection mode) for Exynos7 because exynos7_tmu_control() always > >> enables the power down detection mode regardless 'on' parameter. > >> > >> Cc: Zhang Rui <rui.zhang@intel.com> > >> Cc: Eduardo Valentin <edubezval@gmail.com> > >> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> > >> --- > >> drivers/thermal/samsung/exynos_tmu.c | 3 ++- > >> 1 file changed, 2 insertions(+), 1 deletion(-) > >> > >> diff --git a/drivers/thermal/samsung/exynos_tmu.c > >> b/drivers/thermal/samsung/exynos_tmu.c index 933cd80..a60f527 > >> 100644 --- a/drivers/thermal/samsung/exynos_tmu.c > >> +++ b/drivers/thermal/samsung/exynos_tmu.c > >> @@ -682,6 +682,7 @@ static void exynos7_tmu_control(struct > >> platform_device *pdev, bool on) > >> if (on) { > >> con |= (1 << EXYNOS_TMU_CORE_EN_SHIFT); > >> + con |= (1 << EXYNOS7_PD_DET_EN_SHIFT); > >> interrupt_en = > >> (of_thermal_is_trip_valid(tz, 7) > >> << EXYNOS7_TMU_INTEN_RISE7_SHIFT) | > >> @@ -704,9 +705,9 @@ static void exynos7_tmu_control(struct > >> platform_device *pdev, bool on) interrupt_en << > >> EXYNOS_TMU_INTEN_FALL0_SHIFT; } else { > >> con &= ~(1 << EXYNOS_TMU_CORE_EN_SHIFT); > >> + con &= ~(1 << EXYNOS7_PD_DET_EN_SHIFT); > >> interrupt_en = 0; /* Disable all interrupts */ > >> } > >> - con |= 1 << EXYNOS7_PD_DET_EN_SHIFT; > >> > >> writel(interrupt_en, data->base + EXYNOS7_TMU_REG_INTEN); > >> writel(con, data->base + EXYNOS_TMU_REG_CONTROL); > > > > Could you test this patch if it isn't introducing any regression on > > your HW? > > The patch does not cause any regression on exynos7 and seems > logically correct. > > Tested-by: Abhilash Kesavan <a.kesavan@samsung.com> > Eduardo, it is up to you if you prefer to take this fix directly or via the new thermal-samsung tree ? From when shall I regard myself as a maintainer? :-) > > Regards, > Abhilash > > > > -- > > Best regards, > > > > Lukasz Majewski > > > > Samsung R&D Institute Poland (SRPOL) | Linux Platform Group
On Wed, Feb 25, 2015 at 01:25:08PM +0100, Lukasz Majewski wrote: > Hi Eduardo, > > > Hi Lukasz, > > > > On Wed, Feb 25, 2015 at 2:33 PM, Lukasz Majewski > > <l.majewski@samsung.com> wrote: > > > Hi Abhilash, > > > > > >> This patch fixes the wrong control of PD_DET_EN (power down > > >> detection mode) for Exynos7 because exynos7_tmu_control() always > > >> enables the power down detection mode regardless 'on' parameter. > > >> > > >> Cc: Zhang Rui <rui.zhang@intel.com> > > >> Cc: Eduardo Valentin <edubezval@gmail.com> > > >> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> > > >> --- > > >> drivers/thermal/samsung/exynos_tmu.c | 3 ++- > > >> 1 file changed, 2 insertions(+), 1 deletion(-) > > >> > > >> diff --git a/drivers/thermal/samsung/exynos_tmu.c > > >> b/drivers/thermal/samsung/exynos_tmu.c index 933cd80..a60f527 > > >> 100644 --- a/drivers/thermal/samsung/exynos_tmu.c > > >> +++ b/drivers/thermal/samsung/exynos_tmu.c > > >> @@ -682,6 +682,7 @@ static void exynos7_tmu_control(struct > > >> platform_device *pdev, bool on) > > >> if (on) { > > >> con |= (1 << EXYNOS_TMU_CORE_EN_SHIFT); > > >> + con |= (1 << EXYNOS7_PD_DET_EN_SHIFT); > > >> interrupt_en = > > >> (of_thermal_is_trip_valid(tz, 7) > > >> << EXYNOS7_TMU_INTEN_RISE7_SHIFT) | > > >> @@ -704,9 +705,9 @@ static void exynos7_tmu_control(struct > > >> platform_device *pdev, bool on) interrupt_en << > > >> EXYNOS_TMU_INTEN_FALL0_SHIFT; } else { > > >> con &= ~(1 << EXYNOS_TMU_CORE_EN_SHIFT); > > >> + con &= ~(1 << EXYNOS7_PD_DET_EN_SHIFT); > > >> interrupt_en = 0; /* Disable all interrupts */ > > >> } > > >> - con |= 1 << EXYNOS7_PD_DET_EN_SHIFT; > > >> > > >> writel(interrupt_en, data->base + EXYNOS7_TMU_REG_INTEN); > > >> writel(con, data->base + EXYNOS_TMU_REG_CONTROL); > > > > > > Could you test this patch if it isn't introducing any regression on > > > your HW? > > > > The patch does not cause any regression on exynos7 and seems > > logically correct. > > > > Tested-by: Abhilash Kesavan <a.kesavan@samsung.com> > > > > Eduardo, it is up to you if you prefer to take this fix directly or via > the new thermal-samsung tree ? > > From when shall I regard myself as a maintainer? :-) > Yeah. Go ahead and collect it. > > > > > Regards, > > Abhilash > > > > > > -- > > > Best regards, > > > > > > Lukasz Majewski > > > > > > Samsung R&D Institute Poland (SRPOL) | Linux Platform Group > > > -- > Best regards, > > Lukasz Majewski > > Samsung R&D Institute Poland (SRPOL) | Linux Platform Group
diff --git a/drivers/thermal/samsung/exynos_tmu.c b/drivers/thermal/samsung/exynos_tmu.c index 933cd80..a60f527 100644 --- a/drivers/thermal/samsung/exynos_tmu.c +++ b/drivers/thermal/samsung/exynos_tmu.c @@ -682,6 +682,7 @@ static void exynos7_tmu_control(struct platform_device *pdev, bool on) if (on) { con |= (1 << EXYNOS_TMU_CORE_EN_SHIFT); + con |= (1 << EXYNOS7_PD_DET_EN_SHIFT); interrupt_en = (of_thermal_is_trip_valid(tz, 7) << EXYNOS7_TMU_INTEN_RISE7_SHIFT) | @@ -704,9 +705,9 @@ static void exynos7_tmu_control(struct platform_device *pdev, bool on) interrupt_en << EXYNOS_TMU_INTEN_FALL0_SHIFT; } else { con &= ~(1 << EXYNOS_TMU_CORE_EN_SHIFT); + con &= ~(1 << EXYNOS7_PD_DET_EN_SHIFT); interrupt_en = 0; /* Disable all interrupts */ } - con |= 1 << EXYNOS7_PD_DET_EN_SHIFT; writel(interrupt_en, data->base + EXYNOS7_TMU_REG_INTEN); writel(con, data->base + EXYNOS_TMU_REG_CONTROL);
This patch fixes the wrong control of PD_DET_EN (power down detection mode) for Exynos7 because exynos7_tmu_control() always enables the power down detection mode regardless 'on' parameter. Cc: Zhang Rui <rui.zhang@intel.com> Cc: Eduardo Valentin <edubezval@gmail.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> --- drivers/thermal/samsung/exynos_tmu.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)