diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 5436ad479b08..a2408a63b341 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -115,6 +115,7 @@ dtb-$(CONFIG_ARCH_EXYNOS5) += \
 	exynos5250-arndale.dtb \
 	exynos5250-smdk5250.dtb \
 	exynos5250-snow.dtb \
+	exynos5250-snow-rev5.dtb \
 	exynos5250-spring.dtb \
 	exynos5260-xyref5260.dtb \
 	exynos5410-smdk5410.dtb \
diff --git a/arch/arm/boot/dts/exynos5250-snow-common.dtsi b/arch/arm/boot/dts/exynos5250-snow-common.dtsi
new file mode 100644
index 000000000000..0a7f408824d8
--- /dev/null
+++ b/arch/arm/boot/dts/exynos5250-snow-common.dtsi
@@ -0,0 +1,684 @@
+/*
+ * Google Snow board device tree source
+ *
+ * Copyright (c) 2012 Google, Inc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/maxim,max77686.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/input/input.h>
+#include "exynos5250.dtsi"
+
+/ {
+	aliases {
+		i2c104 = &i2c_104;
+	};
+
+	memory {
+		reg = <0x40000000 0x80000000>;
+	};
+
+	chosen {
+		bootargs = "console=tty1";
+		stdout-path = "serial3:115200n8";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&power_key_irq &lid_irq>;
+
+		power {
+			label = "Power";
+			gpios = <&gpx1 3 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			gpio-key,wakeup;
+		};
+
+		lid-switch {
+			label = "Lid";
+			gpios = <&gpx3 5 GPIO_ACTIVE_LOW>;
+			linux,input-type = <5>; /* EV_SW */
+			linux,code = <0>; /* SW_LID */
+			debounce-interval = <1>;
+			gpio-key,wakeup;
+		};
+	};
+
+	vbat: vbat-fixed-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vbat-supply";
+		regulator-boot-on;
+	};
+
+	i2c-arbitrator {
+		compatible = "i2c-arb-gpio-challenge";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c-parent = <&{/i2c@12CA0000}>;
+
+		our-claim-gpio = <&gpf0 3 GPIO_ACTIVE_LOW>;
+		their-claim-gpios = <&gpe0 4 GPIO_ACTIVE_LOW>;
+		slew-delay-us = <10>;
+		wait-retry-us = <3000>;
+		wait-free-us = <50000>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&arb_our_claim &arb_their_claim>;
+
+		/* Use ID 104 as a hint that we're on physical bus 4 */
+		i2c_104: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			battery: sbs-battery@b {
+				compatible = "sbs,sbs-battery";
+				reg = <0xb>;
+				sbs,poll-retry-count = <1>;
+			};
+
+			cros_ec: embedded-controller {
+				compatible = "google,cros-ec-i2c";
+				reg = <0x1e>;
+				interrupts = <6 IRQ_TYPE_NONE>;
+				interrupt-parent = <&gpx1>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&ec_irq>;
+				wakeup-source;
+			};
+
+			power-regulator {
+				compatible = "ti,tps65090";
+				reg = <0x48>;
+
+				/*
+				 * Config irq to disable internal pulls
+				 * even though we run in polling mode.
+				 */
+				pinctrl-names = "default";
+				pinctrl-0 = <&tps65090_irq>;
+
+				vsys1-supply = <&vbat>;
+				vsys2-supply = <&vbat>;
+				vsys3-supply = <&vbat>;
+				infet1-supply = <&vbat>;
+				infet2-supply = <&vbat>;
+				infet3-supply = <&vbat>;
+				infet4-supply = <&vbat>;
+				infet5-supply = <&vbat>;
+				infet6-supply = <&vbat>;
+				infet7-supply = <&vbat>;
+				vsys-l1-supply = <&vbat>;
+				vsys-l2-supply = <&vbat>;
+
+				regulators {
+					dcdc1 {
+						ti,enable-ext-control;
+					};
+					dcdc2 {
+						ti,enable-ext-control;
+					};
+					dcdc3 {
+						ti,enable-ext-control;
+					};
+					fet1: fet1 {
+						regulator-name = "vcd_led";
+						ti,overcurrent-wait = <3>;
+					};
+					tps65090_fet2: fet2 {
+						regulator-name = "video_mid";
+						regulator-always-on;
+						ti,overcurrent-wait = <3>;
+					};
+					fet3 {
+						regulator-name = "wwan_r";
+						regulator-always-on;
+						ti,overcurrent-wait = <3>;
+					};
+					fet4 {
+						regulator-name = "sdcard";
+						ti,overcurrent-wait = <3>;
+					};
+					fet5 {
+						regulator-name = "camout";
+						regulator-always-on;
+						ti,overcurrent-wait = <3>;
+					};
+					fet6: fet6 {
+						regulator-name = "lcd_vdd";
+						ti,overcurrent-wait = <3>;
+					};
+					tps65090_fet7: fet7 {
+						regulator-name = "video_mid_1a";
+						regulator-always-on;
+						ti,overcurrent-wait = <3>;
+					};
+					ldo1 {
+					};
+					ldo2 {
+					};
+				};
+
+				charger {
+					compatible = "ti,tps65090-charger";
+				};
+			};
+		};
+	};
+
+	sound {
+		samsung,i2s-controller = <&i2s0>;
+	};
+
+	usb3_vbus_reg: regulator-usb3 {
+		compatible = "regulator-fixed";
+		regulator-name = "P5.0V_USB3CON";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpx2 7 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb3_vbus_en>;
+		enable-active-high;
+	};
+
+	fixed-rate-clocks {
+		xxti {
+			compatible = "samsung,clock-xxti";
+			clock-frequency = <24000000>;
+		};
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 0 1000000 0>;
+		brightness-levels = <0 100 500 1000 1500 2000 2500 2800>;
+		default-brightness-level = <7>;
+		enable-gpios = <&gpx3 0 GPIO_ACTIVE_HIGH>;
+		power-supply = <&fet1>;
+		pinctrl-0 = <&pwm0_out>;
+		pinctrl-names = "default";
+	};
+
+	panel: panel {
+		compatible = "auo,b116xw03";
+		power-supply = <&fet6>;
+		backlight = <&backlight>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&bridge_out>;
+			};
+		};
+	};
+
+	mmc3_pwrseq: mmc3_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpx0 2 GPIO_ACTIVE_LOW>, /* WIFI_RSTn */
+			      <&gpx0 1 GPIO_ACTIVE_LOW>; /* WIFI_EN */
+		clocks = <&max77686 MAX77686_CLK_PMIC>;
+		clock-names = "ext_clock";
+	};
+};
+
+&cpu0 {
+	cpu0-supply = <&buck2_reg>;
+};
+
+&dp {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&dp_hpd>;
+	samsung,color-space = <0>;
+	samsung,dynamic-range = <0>;
+	samsung,ycbcr-coeff = <0>;
+	samsung,color-depth = <1>;
+	samsung,link-rate = <0x0a>;
+	samsung,lane-count = <2>;
+	samsung,hpd-gpio = <&gpx0 7 GPIO_ACTIVE_HIGH>;
+
+	ports {
+		port@0 {
+			dp_out: endpoint {
+				remote-endpoint = <&bridge_in>;
+			};
+		};
+	};
+};
+
+&ehci {
+	samsung,vbus-gpio = <&gpx1 1 GPIO_ACTIVE_HIGH>;
+};
+
+&fimd {
+	status = "okay";
+	samsung,invert-vclk;
+};
+
+&hdmi {
+	hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&hdmi_hpd_irq>;
+	phy = <&hdmiphy>;
+	ddc = <&i2c_2>;
+	hdmi-en-supply = <&tps65090_fet7>;
+	vdd-supply = <&ldo8_reg>;
+	vdd_osc-supply = <&ldo10_reg>;
+	vdd_pll-supply = <&ldo8_reg>;
+};
+
+&i2c_0 {
+	status = "okay";
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-max-bus-freq = <378000>;
+
+	max77686: max77686@09 {
+		compatible = "maxim,max77686";
+		interrupt-parent = <&gpx3>;
+		interrupts = <2 IRQ_TYPE_NONE>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&max77686_irq>;
+		wakeup-source;
+		reg = <0x09>;
+		#clock-cells = <1>;
+
+		voltage-regulators {
+			ldo1_reg: LDO1 {
+				regulator-name = "P1.0V_LDO_OUT1";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+			};
+
+			ldo2_reg: LDO2 {
+				regulator-name = "P1.8V_LDO_OUT2";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			ldo3_reg: LDO3 {
+				regulator-name = "P1.8V_LDO_OUT3";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			ldo7_reg: LDO7 {
+				regulator-name = "P1.1V_LDO_OUT7";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-always-on;
+			};
+
+			ldo8_reg: LDO8 {
+				regulator-name = "P1.0V_LDO_OUT8";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+			};
+
+			ldo10_reg: LDO10 {
+				regulator-name = "P1.8V_LDO_OUT10";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			ldo12_reg: LDO12 {
+				regulator-name = "P3.0V_LDO_OUT12";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-always-on;
+			};
+
+			ldo14_reg: LDO14 {
+				regulator-name = "P1.8V_LDO_OUT14";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			ldo15_reg: LDO15 {
+				regulator-name = "P1.0V_LDO_OUT15";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+			};
+
+			ldo16_reg: LDO16 {
+				regulator-name = "P1.8V_LDO_OUT16";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			buck1_reg: BUCK1 {
+				regulator-name = "vdd_mif";
+				regulator-min-microvolt = <950000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			buck2_reg: BUCK2 {
+				regulator-name = "vdd_arm";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			buck3_reg: BUCK3 {
+				regulator-name = "vdd_int";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			buck4_reg: BUCK4 {
+				regulator-name = "vdd_g3d";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			buck5_reg: BUCK5 {
+				regulator-name = "P1.8V_BUCK_OUT5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			buck6_reg: BUCK6 {
+				regulator-name = "P1.35V_BUCK_OUT6";
+				regulator-min-microvolt = <1350000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+			};
+
+			buck7_reg: BUCK7 {
+				regulator-name = "P2.0V_BUCK_OUT7";
+				regulator-min-microvolt = <2000000>;
+				regulator-max-microvolt = <2000000>;
+				regulator-always-on;
+			};
+
+			buck8_reg: BUCK8 {
+				regulator-name = "P2.85V_BUCK_OUT8";
+				regulator-min-microvolt = <2850000>;
+				regulator-max-microvolt = <2850000>;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&i2c_1 {
+	status = "okay";
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-max-bus-freq = <378000>;
+
+	trackpad {
+		reg = <0x67>;
+		compatible = "cypress,cyapa";
+		interrupts = <2 IRQ_TYPE_NONE>;
+		interrupt-parent = <&gpx1>;
+		wakeup-source;
+	};
+};
+
+/*
+ * Disabled pullups since external part has its own pullups and
+ * double-pulling gets us out of spec in some cases.
+ */
+&i2c2_bus {
+	samsung,pin-pud = <0>;
+};
+
+&i2c_2 {
+	status = "okay";
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-max-bus-freq = <66000>;
+
+	hdmiddc@50 {
+		compatible = "samsung,exynos4210-hdmiddc";
+		reg = <0x50>;
+	};
+};
+
+&i2c_3 {
+	status = "okay";
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-max-bus-freq = <66000>;
+};
+
+&i2c_4 {
+	status = "okay";
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-max-bus-freq = <66000>;
+};
+
+&i2c_5 {
+	status = "okay";
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-max-bus-freq = <66000>;
+};
+
+&i2c_7 {
+	status = "okay";
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-max-bus-freq = <66000>;
+
+	ptn3460: lvds-bridge@20 {
+		compatible = "nxp,ptn3460";
+		reg = <0x20>;
+		powerdown-gpios = <&gpy2 5 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpx1 5 GPIO_ACTIVE_HIGH>;
+		edid-emulation = <5>;
+
+		ports {
+			port@0 {
+				bridge_out: endpoint {
+					remote-endpoint = <&panel_in>;
+				};
+			};
+
+			port@1 {
+				bridge_in: endpoint {
+					remote-endpoint = <&dp_out>;
+				};
+			};
+		};
+	};
+};
+
+&i2c_8 {
+	status = "okay";
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-max-bus-freq = <378000>;
+
+	hdmiphy: hdmiphy@38 {
+		compatible = "samsung,exynos4212-hdmiphy";
+		reg = <0x38>;
+	};
+};
+
+&i2s0 {
+	status = "okay";
+};
+
+&mmc_0 {
+	status = "okay";
+	num-slots = <1>;
+	broken-cd;
+	card-detect-delay = <200>;
+	samsung,dw-mshc-ciu-div = <3>;
+	samsung,dw-mshc-sdr-timing = <2 3>;
+	samsung,dw-mshc-ddr-timing = <1 2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_cd &sd0_bus4 &sd0_bus8>;
+	bus-width = <8>;
+	cap-mmc-highspeed;
+};
+
+&mmc_2 {
+	status = "okay";
+	num-slots = <1>;
+	card-detect-delay = <200>;
+	samsung,dw-mshc-ciu-div = <3>;
+	samsung,dw-mshc-sdr-timing = <2 3>;
+	samsung,dw-mshc-ddr-timing = <1 2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
+	bus-width = <4>;
+	wp-gpios = <&gpc2 1 GPIO_ACTIVE_HIGH>;
+	cap-sd-highspeed;
+};
+
+/*
+ * On Snow we've got SIP WiFi and so can keep drive strengths low to
+ * reduce EMI.
+ */
+&mmc_3 {
+	status = "okay";
+	num-slots = <1>;
+	broken-cd;
+	cap-sdio-irq;
+	keep-power-in-suspend;
+	card-detect-delay = <200>;
+	samsung,dw-mshc-ciu-div = <3>;
+	samsung,dw-mshc-sdr-timing = <2 3>;
+	samsung,dw-mshc-ddr-timing = <1 2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd3_clk &sd3_cmd &sd3_bus4 &wifi_en &wifi_rst>;
+	bus-width = <4>;
+	cap-sd-highspeed;
+	mmc-pwrseq = <&mmc3_pwrseq>;
+};
+
+&pinctrl_0 {
+	wifi_en: wifi-en {
+		samsung,pins = "gpx0-1";
+		samsung,pin-function = <1>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	wifi_rst: wifi-rst {
+		samsung,pins = "gpx0-2";
+		samsung,pin-function = <1>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	power_key_irq: power-key-irq {
+		samsung,pins = "gpx1-3";
+		samsung,pin-function = <0xf>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	ec_irq: ec-irq {
+		samsung,pins = "gpx1-6";
+		samsung,pin-function = <0>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	tps65090_irq: tps65090-irq {
+		samsung,pins = "gpx2-6";
+		samsung,pin-function = <0>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	usb3_vbus_en: usb3-vbus-en {
+		samsung,pins = "gpx2-7";
+		samsung,pin-function = <1>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	max77686_irq: max77686-irq {
+		samsung,pins = "gpx3-2";
+		samsung,pin-function = <0>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	lid_irq: lid-irq {
+		samsung,pins = "gpx3-5";
+		samsung,pin-function = <0xf>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	hdmi_hpd_irq: hdmi-hpd-irq {
+		samsung,pins = "gpx3-7";
+		samsung,pin-function = <0>;
+		samsung,pin-pud = <1>;
+		samsung,pin-drv = <0>;
+	};
+};
+
+&pinctrl_1 {
+	arb_their_claim: arb-their-claim {
+		samsung,pins = "gpe0-4";
+		samsung,pin-function = <0>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	arb_our_claim: arb-our-claim {
+		samsung,pins = "gpf0-3";
+		samsung,pin-function = <1>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+};
+
+&rtc {
+	status = "okay";
+	clocks = <&clock CLK_RTC>, <&max77686 MAX77686_CLK_AP>;
+	clock-names = "rtc", "rtc_src";
+};
+
+&sd3_bus4 {
+	samsung,pin-drv = <0>;
+};
+
+&sd3_clk {
+	samsung,pin-drv = <0>;
+};
+
+&sd3_cmd {
+	samsung,pin-pud = <3>;
+	samsung,pin-drv = <0>;
+};
+
+&spi_1 {
+	status = "okay";
+	samsung,spi-src-clk = <0>;
+	num-cs = <1>;
+	cs-gpios = <&gpa2 5 GPIO_ACTIVE_HIGH>;
+};
+
+&usbdrd_dwc3 {
+	dr_mode = "host";
+};
+
+&usbdrd_phy {
+	vbus-supply = <&usb3_vbus_reg>;
+};
+
+#include "cros-ec-keyboard.dtsi"
diff --git a/arch/arm/boot/dts/exynos5250-snow-rev5.dts b/arch/arm/boot/dts/exynos5250-snow-rev5.dts
new file mode 100644
index 000000000000..ce5374547c3f
--- /dev/null
+++ b/arch/arm/boot/dts/exynos5250-snow-rev5.dts
@@ -0,0 +1,47 @@
+/*
+ * Google Snow Rev 5+ board device tree source
+ *
+ * Copyright (c) 2012 Google, Inc
+ * Copyright (c) 2015 Samsung Electronics Co., Ltd.
+ *             http://www.samsung.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/dts-v1/;
+#include "exynos5250-snow-common.dtsi"
+
+/ {
+	model = "Google Snow Rev 5+";
+	compatible = "google,snow-rev5", "samsung,exynos5250", "samsung,exynos5";
+
+	sound {
+		compatible = "google,snow-audio-max98090";
+
+		samsung,model = "Snow-I2S-MAX98090";
+		samsung,audio-codec = <&max98090>;
+	};
+};
+
+&i2c_7 {
+	max98090: codec@10 {
+		compatible = "maxim,max98090";
+		reg = <0x10>;
+		interrupts = <4 IRQ_TYPE_NONE>;
+		interrupt-parent = <&gpx0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&max98090_irq>;
+	};
+};
+
+&pinctrl_0 {
+	max98090_irq: max98090-irq {
+		samsung,pins = "gpx0-4";
+		samsung,pin-function = <0>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+};
+
diff --git a/arch/arm/boot/dts/exynos5250-snow.dts b/arch/arm/boot/dts/exynos5250-snow.dts
index 0720caab5511..99c4d2a9fcf9 100644
--- a/arch/arm/boot/dts/exynos5250-snow.dts
+++ b/arch/arm/boot/dts/exynos5250-snow.dts
@@ -9,506 +9,21 @@
  */
 
 /dts-v1/;
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/clock/maxim,max77686.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/input/input.h>
-#include "exynos5250.dtsi"
+#include "exynos5250-snow-common.dtsi"
 
 / {
 	model = "Google Snow";
 	compatible = "google,snow", "samsung,exynos5250", "samsung,exynos5";
 
-	aliases {
-		i2c104 = &i2c_104;
-	};
-
-	memory {
-		reg = <0x40000000 0x80000000>;
-	};
-
-	chosen {
-		bootargs = "console=tty1";
-		stdout-path = "serial3:115200n8";
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&power_key_irq &lid_irq>;
-
-		power {
-			label = "Power";
-			gpios = <&gpx1 3 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_POWER>;
-			gpio-key,wakeup;
-		};
-
-		lid-switch {
-			label = "Lid";
-			gpios = <&gpx3 5 GPIO_ACTIVE_LOW>;
-			linux,input-type = <5>; /* EV_SW */
-			linux,code = <0>; /* SW_LID */
-			debounce-interval = <1>;
-			gpio-key,wakeup;
-		};
-	};
-
-	vbat: vbat-fixed-regulator {
-		compatible = "regulator-fixed";
-		regulator-name = "vbat-supply";
-		regulator-boot-on;
-	};
-
-	i2c-arbitrator {
-		compatible = "i2c-arb-gpio-challenge";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		i2c-parent = <&{/i2c@12CA0000}>;
-
-		our-claim-gpio = <&gpf0 3 GPIO_ACTIVE_LOW>;
-		their-claim-gpios = <&gpe0 4 GPIO_ACTIVE_LOW>;
-		slew-delay-us = <10>;
-		wait-retry-us = <3000>;
-		wait-free-us = <50000>;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&arb_our_claim &arb_their_claim>;
-
-		/* Use ID 104 as a hint that we're on physical bus 4 */
-		i2c_104: i2c@0 {
-			reg = <0>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			battery: sbs-battery@b {
-				compatible = "sbs,sbs-battery";
-				reg = <0xb>;
-				sbs,poll-retry-count = <1>;
-			};
-
-			cros_ec: embedded-controller {
-				compatible = "google,cros-ec-i2c";
-				reg = <0x1e>;
-				interrupts = <6 IRQ_TYPE_NONE>;
-				interrupt-parent = <&gpx1>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&ec_irq>;
-				wakeup-source;
-			};
-
-			power-regulator {
-				compatible = "ti,tps65090";
-				reg = <0x48>;
-
-				/*
-				 * Config irq to disable internal pulls
-				 * even though we run in polling mode.
-				 */
-				pinctrl-names = "default";
-				pinctrl-0 = <&tps65090_irq>;
-
-				vsys1-supply = <&vbat>;
-				vsys2-supply = <&vbat>;
-				vsys3-supply = <&vbat>;
-				infet1-supply = <&vbat>;
-				infet2-supply = <&vbat>;
-				infet3-supply = <&vbat>;
-				infet4-supply = <&vbat>;
-				infet5-supply = <&vbat>;
-				infet6-supply = <&vbat>;
-				infet7-supply = <&vbat>;
-				vsys-l1-supply = <&vbat>;
-				vsys-l2-supply = <&vbat>;
-
-				regulators {
-					dcdc1 {
-						ti,enable-ext-control;
-					};
-					dcdc2 {
-						ti,enable-ext-control;
-					};
-					dcdc3 {
-						ti,enable-ext-control;
-					};
-					fet1: fet1 {
-						regulator-name = "vcd_led";
-						ti,overcurrent-wait = <3>;
-					};
-					tps65090_fet2: fet2 {
-						regulator-name = "video_mid";
-						regulator-always-on;
-						ti,overcurrent-wait = <3>;
-					};
-					fet3 {
-						regulator-name = "wwan_r";
-						regulator-always-on;
-						ti,overcurrent-wait = <3>;
-					};
-					fet4 {
-						regulator-name = "sdcard";
-						ti,overcurrent-wait = <3>;
-					};
-					fet5 {
-						regulator-name = "camout";
-						regulator-always-on;
-						ti,overcurrent-wait = <3>;
-					};
-					fet6: fet6 {
-						regulator-name = "lcd_vdd";
-						ti,overcurrent-wait = <3>;
-					};
-					tps65090_fet7: fet7 {
-						regulator-name = "video_mid_1a";
-						regulator-always-on;
-						ti,overcurrent-wait = <3>;
-					};
-					ldo1 {
-					};
-					ldo2 {
-					};
-				};
-
-				charger {
-					compatible = "ti,tps65090-charger";
-				};
-			};
-		};
-	};
-
 	sound {
 		compatible = "google,snow-audio-max98095";
 
 		samsung,model = "Snow-I2S-MAX98095";
-		samsung,i2s-controller = <&i2s0>;
 		samsung,audio-codec = <&max98095>;
 	};
-
-	usb3_vbus_reg: regulator-usb3 {
-		compatible = "regulator-fixed";
-		regulator-name = "P5.0V_USB3CON";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpx2 7 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&usb3_vbus_en>;
-		enable-active-high;
-	};
-
-	fixed-rate-clocks {
-		xxti {
-			compatible = "samsung,clock-xxti";
-			clock-frequency = <24000000>;
-		};
-	};
-
-	backlight: backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm 0 1000000 0>;
-		brightness-levels = <0 100 500 1000 1500 2000 2500 2800>;
-		default-brightness-level = <7>;
-		enable-gpios = <&gpx3 0 GPIO_ACTIVE_HIGH>;
-		power-supply = <&fet1>;
-		pinctrl-0 = <&pwm0_out>;
-		pinctrl-names = "default";
-	};
-
-	panel: panel {
-		compatible = "auo,b116xw03";
-		power-supply = <&fet6>;
-		backlight = <&backlight>;
-
-		port {
-			panel_in: endpoint {
-				remote-endpoint = <&bridge_out>;
-			};
-		};
-	};
-
-	mmc3_pwrseq: mmc3_pwrseq {
-		compatible = "mmc-pwrseq-simple";
-		reset-gpios = <&gpx0 2 GPIO_ACTIVE_LOW>, /* WIFI_RSTn */
-			      <&gpx0 1 GPIO_ACTIVE_LOW>; /* WIFI_EN */
-		clocks = <&max77686 MAX77686_CLK_PMIC>;
-		clock-names = "ext_clock";
-	};
-};
-
-&cpu0 {
-	cpu0-supply = <&buck2_reg>;
-};
-
-&dp {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&dp_hpd>;
-	samsung,color-space = <0>;
-	samsung,dynamic-range = <0>;
-	samsung,ycbcr-coeff = <0>;
-	samsung,color-depth = <1>;
-	samsung,link-rate = <0x0a>;
-	samsung,lane-count = <2>;
-	samsung,hpd-gpio = <&gpx0 7 GPIO_ACTIVE_HIGH>;
-
-	ports {
-		port@0 {
-			dp_out: endpoint {
-				remote-endpoint = <&bridge_in>;
-			};
-		};
-	};
-};
-
-&ehci {
-	samsung,vbus-gpio = <&gpx1 1 GPIO_ACTIVE_HIGH>;
-};
-
-&fimd {
-	status = "okay";
-	samsung,invert-vclk;
-};
-
-&hdmi {
-	hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&hdmi_hpd_irq>;
-	phy = <&hdmiphy>;
-	ddc = <&i2c_2>;
-	hdmi-en-supply = <&tps65090_fet7>;
-	vdd-supply = <&ldo8_reg>;
-	vdd_osc-supply = <&ldo10_reg>;
-	vdd_pll-supply = <&ldo8_reg>;
-};
-
-&i2c_0 {
-	status = "okay";
-	samsung,i2c-sda-delay = <100>;
-	samsung,i2c-max-bus-freq = <378000>;
-
-	max77686: max77686@09 {
-		compatible = "maxim,max77686";
-		interrupt-parent = <&gpx3>;
-		interrupts = <2 IRQ_TYPE_NONE>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&max77686_irq>;
-		wakeup-source;
-		reg = <0x09>;
-		#clock-cells = <1>;
-
-		voltage-regulators {
-			ldo1_reg: LDO1 {
-				regulator-name = "P1.0V_LDO_OUT1";
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1000000>;
-				regulator-always-on;
-			};
-
-			ldo2_reg: LDO2 {
-				regulator-name = "P1.8V_LDO_OUT2";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-			};
-
-			ldo3_reg: LDO3 {
-				regulator-name = "P1.8V_LDO_OUT3";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-			};
-
-			ldo7_reg: LDO7 {
-				regulator-name = "P1.1V_LDO_OUT7";
-				regulator-min-microvolt = <1100000>;
-				regulator-max-microvolt = <1100000>;
-				regulator-always-on;
-			};
-
-			ldo8_reg: LDO8 {
-				regulator-name = "P1.0V_LDO_OUT8";
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1000000>;
-				regulator-always-on;
-			};
-
-			ldo10_reg: LDO10 {
-				regulator-name = "P1.8V_LDO_OUT10";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-			};
-
-			ldo12_reg: LDO12 {
-				regulator-name = "P3.0V_LDO_OUT12";
-				regulator-min-microvolt = <3000000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-always-on;
-			};
-
-			ldo14_reg: LDO14 {
-				regulator-name = "P1.8V_LDO_OUT14";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-			};
-
-			ldo15_reg: LDO15 {
-				regulator-name = "P1.0V_LDO_OUT15";
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1000000>;
-				regulator-always-on;
-			};
-
-			ldo16_reg: LDO16 {
-				regulator-name = "P1.8V_LDO_OUT16";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-			};
-
-			buck1_reg: BUCK1 {
-				regulator-name = "vdd_mif";
-				regulator-min-microvolt = <950000>;
-				regulator-max-microvolt = <1300000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			buck2_reg: BUCK2 {
-				regulator-name = "vdd_arm";
-				regulator-min-microvolt = <850000>;
-				regulator-max-microvolt = <1350000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			buck3_reg: BUCK3 {
-				regulator-name = "vdd_int";
-				regulator-min-microvolt = <900000>;
-				regulator-max-microvolt = <1200000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			buck4_reg: BUCK4 {
-				regulator-name = "vdd_g3d";
-				regulator-min-microvolt = <850000>;
-				regulator-max-microvolt = <1300000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			buck5_reg: BUCK5 {
-				regulator-name = "P1.8V_BUCK_OUT5";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			buck6_reg: BUCK6 {
-				regulator-name = "P1.35V_BUCK_OUT6";
-				regulator-min-microvolt = <1350000>;
-				regulator-max-microvolt = <1350000>;
-				regulator-always-on;
-			};
-
-			buck7_reg: BUCK7 {
-				regulator-name = "P2.0V_BUCK_OUT7";
-				regulator-min-microvolt = <2000000>;
-				regulator-max-microvolt = <2000000>;
-				regulator-always-on;
-			};
-
-			buck8_reg: BUCK8 {
-				regulator-name = "P2.85V_BUCK_OUT8";
-				regulator-min-microvolt = <2850000>;
-				regulator-max-microvolt = <2850000>;
-				regulator-always-on;
-			};
-		};
-	};
-};
-
-&i2c_1 {
-	status = "okay";
-	samsung,i2c-sda-delay = <100>;
-	samsung,i2c-max-bus-freq = <378000>;
-
-	trackpad {
-		reg = <0x67>;
-		compatible = "cypress,cyapa";
-		interrupts = <2 IRQ_TYPE_NONE>;
-		interrupt-parent = <&gpx1>;
-		wakeup-source;
-	};
-};
-
-/*
- * Disabled pullups since external part has its own pullups and
- * double-pulling gets us out of spec in some cases.
- */
-&i2c2_bus {
-	samsung,pin-pud = <0>;
-};
-
-&i2c_2 {
-	status = "okay";
-	samsung,i2c-sda-delay = <100>;
-	samsung,i2c-max-bus-freq = <66000>;
-
-	hdmiddc@50 {
-		compatible = "samsung,exynos4210-hdmiddc";
-		reg = <0x50>;
-	};
-};
-
-&i2c_3 {
-	status = "okay";
-	samsung,i2c-sda-delay = <100>;
-	samsung,i2c-max-bus-freq = <66000>;
-};
-
-&i2c_4 {
-	status = "okay";
-	samsung,i2c-sda-delay = <100>;
-	samsung,i2c-max-bus-freq = <66000>;
-};
-
-&i2c_5 {
-	status = "okay";
-	samsung,i2c-sda-delay = <100>;
-	samsung,i2c-max-bus-freq = <66000>;
 };
 
 &i2c_7 {
-	status = "okay";
-	samsung,i2c-sda-delay = <100>;
-	samsung,i2c-max-bus-freq = <66000>;
-
-	ptn3460: lvds-bridge@20 {
-		compatible = "nxp,ptn3460";
-		reg = <0x20>;
-		powerdown-gpios = <&gpy2 5 GPIO_ACTIVE_HIGH>;
-		reset-gpios = <&gpx1 5 GPIO_ACTIVE_HIGH>;
-		edid-emulation = <5>;
-
-		ports {
-			port@0 {
-				bridge_out: endpoint {
-					remote-endpoint = <&panel_in>;
-				};
-			};
-
-			port@1 {
-				bridge_in: endpoint {
-					remote-endpoint = <&dp_out>;
-				};
-			};
-		};
-	};
-
 	max98095: codec@11 {
 		compatible = "maxim,max98095";
 		reg = <0x11>;
@@ -517,190 +32,11 @@
 	};
 };
 
-&i2c_8 {
-	status = "okay";
-	samsung,i2c-sda-delay = <100>;
-	samsung,i2c-max-bus-freq = <378000>;
-
-	hdmiphy: hdmiphy@38 {
-		compatible = "samsung,exynos4212-hdmiphy";
-		reg = <0x38>;
-	};
-};
-
-&i2s0 {
-	status = "okay";
-};
-
-&mmc_0 {
-	status = "okay";
-	num-slots = <1>;
-	broken-cd;
-	card-detect-delay = <200>;
-	samsung,dw-mshc-ciu-div = <3>;
-	samsung,dw-mshc-sdr-timing = <2 3>;
-	samsung,dw-mshc-ddr-timing = <1 2>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_cd &sd0_bus4 &sd0_bus8>;
-	bus-width = <8>;
-	cap-mmc-highspeed;
-};
-
-&mmc_2 {
-	status = "okay";
-	num-slots = <1>;
-	card-detect-delay = <200>;
-	samsung,dw-mshc-ciu-div = <3>;
-	samsung,dw-mshc-sdr-timing = <2 3>;
-	samsung,dw-mshc-ddr-timing = <1 2>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
-	bus-width = <4>;
-	wp-gpios = <&gpc2 1 GPIO_ACTIVE_HIGH>;
-	cap-sd-highspeed;
-};
-
-/*
- * On Snow we've got SIP WiFi and so can keep drive strengths low to
- * reduce EMI.
- */
-&mmc_3 {
-	status = "okay";
-	num-slots = <1>;
-	broken-cd;
-	cap-sdio-irq;
-	keep-power-in-suspend;
-	card-detect-delay = <200>;
-	samsung,dw-mshc-ciu-div = <3>;
-	samsung,dw-mshc-sdr-timing = <2 3>;
-	samsung,dw-mshc-ddr-timing = <1 2>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&sd3_clk &sd3_cmd &sd3_bus4 &wifi_en &wifi_rst>;
-	bus-width = <4>;
-	cap-sd-highspeed;
-	mmc-pwrseq = <&mmc3_pwrseq>;
-};
-
 &pinctrl_0 {
-	wifi_en: wifi-en {
-		samsung,pins = "gpx0-1";
-		samsung,pin-function = <1>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-
-	wifi_rst: wifi-rst {
-		samsung,pins = "gpx0-2";
-		samsung,pin-function = <1>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-
-	power_key_irq: power-key-irq {
-		samsung,pins = "gpx1-3";
-		samsung,pin-function = <0xf>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-
-	ec_irq: ec-irq {
-		samsung,pins = "gpx1-6";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-
 	max98095_en: max98095-en {
 		samsung,pins = "gpx1-7";
 		samsung,pin-function = <0>;
 		samsung,pin-pud = <3>;
 		samsung,pin-drv = <0>;
 	};
-
-	tps65090_irq: tps65090-irq {
-		samsung,pins = "gpx2-6";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-
-	usb3_vbus_en: usb3-vbus-en {
-		samsung,pins = "gpx2-7";
-		samsung,pin-function = <1>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-
-	max77686_irq: max77686-irq {
-		samsung,pins = "gpx3-2";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-
-	lid_irq: lid-irq {
-		samsung,pins = "gpx3-5";
-		samsung,pin-function = <0xf>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-
-	hdmi_hpd_irq: hdmi-hpd-irq {
-		samsung,pins = "gpx3-7";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <1>;
-		samsung,pin-drv = <0>;
-	};
 };
-
-&pinctrl_1 {
-	arb_their_claim: arb-their-claim {
-		samsung,pins = "gpe0-4";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
-	};
-
-	arb_our_claim: arb-our-claim {
-		samsung,pins = "gpf0-3";
-		samsung,pin-function = <1>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-};
-
-&rtc {
-	status = "okay";
-	clocks = <&clock CLK_RTC>, <&max77686 MAX77686_CLK_AP>;
-	clock-names = "rtc", "rtc_src";
-};
-
-&sd3_bus4 {
-	samsung,pin-drv = <0>;
-};
-
-&sd3_clk {
-	samsung,pin-drv = <0>;
-};
-
-&sd3_cmd {
-	samsung,pin-pud = <3>;
-	samsung,pin-drv = <0>;
-};
-
-&spi_1 {
-	status = "okay";
-	samsung,spi-src-clk = <0>;
-	num-cs = <1>;
-	cs-gpios = <&gpa2 5 GPIO_ACTIVE_HIGH>;
-};
-
-&usbdrd_dwc3 {
-	dr_mode = "host";
-};
-
-&usbdrd_phy {
-	vbus-supply = <&usb3_vbus_reg>;
-};
-
-#include "cros-ec-keyboard.dtsi"
