| Message ID | 1444492559-27181-1-git-send-email-ykk@rock-chips.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Hi, On Saturday 10 October 2015 09:25 PM, Yakir Yang wrote: > This phy driver would control the Rockchip DisplayPort module > phy clock and phy power, it is relate to analogix_dp-rockchip > dp driver. If you want DP works rightly on rockchip platform, > then you should select both of them. Add phy driver for the Rockchip DisplayPort PHY module. This is required to get DisplayPort working in Rockchip SoCs. > > Signed-off-by: Yakir Yang <ykk@rock-chips.com> > --- > Changes in v6: None > Changes in v5: > - Remove "reg" DT property, cause driver could poweron/poweroff phy via > the exist "grf" syscon already. And rename the example DT node from > "edp_phy: phy@ff770274" to "edp_phy: edp-phy" directly. (Heiko) > - Add deivce_node at the front of driver, update phy_ops type from "static > struct" to "static const struct". And correct the input paramters of > devm_phy_create() interfaces. (Heiko) > > Changes in v4: > - Add commit message, and remove the redundant rockchip_dp_phy_init() > function, move those code to probe() method. And remove driver .owner > number. (Kishon) > > Changes in v3: > - Suggest, add rockchip dp phy driver, collect the phy clocks and > power control. (Heiko) > > Changes in v2: None > > drivers/phy/Kconfig | 7 ++ > drivers/phy/Makefile | 1 + > drivers/phy/phy-rockchip-dp.c | 151 ++++++++++++++++++++++++++++++++++++++++++ > 3 files changed, 159 insertions(+) > create mode 100644 drivers/phy/phy-rockchip-dp.c > > diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig > index 47da573..8f2bc4f 100644 > --- a/drivers/phy/Kconfig > +++ b/drivers/phy/Kconfig > @@ -310,6 +310,13 @@ config PHY_ROCKCHIP_USB > help > Enable this to support the Rockchip USB 2.0 PHY. > > +config PHY_ROCKCHIP_DP > + tristate "Rockchip Display Port PHY Driver" > + depends on ARCH_ROCKCHIP && OF > + select GENERIC_PHY > + help > + Enable this to support the Rockchip Display Port PHY. > + > config PHY_ST_SPEAR1310_MIPHY > tristate "ST SPEAR1310-MIPHY driver" > select GENERIC_PHY > diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile > index a5b18c1..e281f35 100644 > --- a/drivers/phy/Makefile > +++ b/drivers/phy/Makefile > @@ -34,6 +34,7 @@ phy-exynos-usb2-$(CONFIG_PHY_S5PV210_USB2) += phy-s5pv210-usb2.o > obj-$(CONFIG_PHY_EXYNOS5_USBDRD) += phy-exynos5-usbdrd.o > obj-$(CONFIG_PHY_QCOM_APQ8064_SATA) += phy-qcom-apq8064-sata.o > obj-$(CONFIG_PHY_ROCKCHIP_USB) += phy-rockchip-usb.o > +obj-$(CONFIG_PHY_ROCKCHIP_DP) += phy-rockchip-dp.o > obj-$(CONFIG_PHY_QCOM_IPQ806X_SATA) += phy-qcom-ipq806x-sata.o > obj-$(CONFIG_PHY_ST_SPEAR1310_MIPHY) += phy-spear1310-miphy.o > obj-$(CONFIG_PHY_ST_SPEAR1340_MIPHY) += phy-spear1340-miphy.o > diff --git a/drivers/phy/phy-rockchip-dp.c b/drivers/phy/phy-rockchip-dp.c > new file mode 100644 > index 0000000..3a2ac120 > --- /dev/null > +++ b/drivers/phy/phy-rockchip-dp.c > @@ -0,0 +1,151 @@ > +/* > + * Rockchip DP PHY driver > + * > + * Copyright (C) 2015 FuZhou Rockchip Co., Ltd. > + * Author: Yakir Yang <ykk@@rock-chips.com> > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License as published by > + * the Free Software Foundation; either version 2 of the License. > + */ > + > +#include <linux/io.h> > +#include <linux/kernel.h> > +#include <linux/module.h> > +#include <linux/of.h> > +#include <linux/of_address.h> > +#include <linux/clk.h> > +#include <linux/phy/phy.h> > +#include <linux/regmap.h> > +#include <linux/mfd/syscon.h> > +#include <linux/platform_device.h> > + > +#define GRF_SOC_CON12 0x0274 > +#define GRF_EDP_REF_CLK_SEL_INTER BIT(4) > +#define GRF_EDP_PHY_SIDDQ_WRITE_EN BIT(21) > +#define GRF_EDP_PHY_SIDDQ_ON 0 > +#define GRF_EDP_PHY_SIDDQ_OFF BIT(5) > + > +struct rockchip_dp_phy { > + struct device *dev; > + struct regmap *grf; > + struct clk *phy_24m; > +}; > + > +static int rockchip_set_phy_state(struct phy *phy, bool enable) > +{ > + struct rockchip_dp_phy *dp = phy_get_drvdata(phy); > + int ret; > + > + if (enable) { > + ret = clk_prepare_enable(dp->phy_24m); > + if (ret < 0) { > + dev_err(dp->dev, "Can't enable clock 24m %d\n", ret); > + return ret; > + } > + > + ret = regmap_write(dp->grf, GRF_SOC_CON12, > + GRF_EDP_PHY_SIDDQ_WRITE_EN | > + GRF_EDP_PHY_SIDDQ_ON); > + } else { > + clk_disable_unprepare(dp->phy_24m); should clk_disable come after regmap_write? It'll be symmetric to enable? > + ret = regmap_write(dp->grf, GRF_SOC_CON12, > + GRF_EDP_PHY_SIDDQ_WRITE_EN | > + GRF_EDP_PHY_SIDDQ_OFF); Is this syscon register used only by Display Port PHY? Better to use regmap_update API? Thanks Kishon -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Am Montag, 12. Oktober 2015, 20:32:47 schrieb Kishon Vijay Abraham I: > Hi, > > On Saturday 10 October 2015 09:25 PM, Yakir Yang wrote: > > This phy driver would control the Rockchip DisplayPort module > > phy clock and phy power, it is relate to analogix_dp-rockchip > > dp driver. If you want DP works rightly on rockchip platform, > > then you should select both of them. > > Add phy driver for the Rockchip DisplayPort PHY module. This is required > to get DisplayPort working in Rockchip SoCs. > > > Signed-off-by: Yakir Yang <ykk@rock-chips.com> > > --- > > Changes in v6: None > > Changes in v5: > > - Remove "reg" DT property, cause driver could poweron/poweroff phy via > > > > the exist "grf" syscon already. And rename the example DT node from > > "edp_phy: phy@ff770274" to "edp_phy: edp-phy" directly. (Heiko) > > > > - Add deivce_node at the front of driver, update phy_ops type from "static > > > > struct" to "static const struct". And correct the input paramters of > > devm_phy_create() interfaces. (Heiko) > > > > Changes in v4: > > - Add commit message, and remove the redundant rockchip_dp_phy_init() > > > > function, move those code to probe() method. And remove driver .owner > > number. (Kishon) > > > > Changes in v3: > > - Suggest, add rockchip dp phy driver, collect the phy clocks and > > > > power control. (Heiko) > > > > Changes in v2: None > > > > drivers/phy/Kconfig | 7 ++ > > drivers/phy/Makefile | 1 + > > drivers/phy/phy-rockchip-dp.c | 151 > > ++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 159 > > insertions(+) > > create mode 100644 drivers/phy/phy-rockchip-dp.c > > > > diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig > > index 47da573..8f2bc4f 100644 > > --- a/drivers/phy/Kconfig > > +++ b/drivers/phy/Kconfig > > @@ -310,6 +310,13 @@ config PHY_ROCKCHIP_USB > > > > help > > > > Enable this to support the Rockchip USB 2.0 PHY. > > > > +config PHY_ROCKCHIP_DP > > + tristate "Rockchip Display Port PHY Driver" > > + depends on ARCH_ROCKCHIP && OF > > + select GENERIC_PHY > > + help > > + Enable this to support the Rockchip Display Port PHY. > > + > > > > config PHY_ST_SPEAR1310_MIPHY > > > > tristate "ST SPEAR1310-MIPHY driver" > > select GENERIC_PHY > > > > diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile > > index a5b18c1..e281f35 100644 > > --- a/drivers/phy/Makefile > > +++ b/drivers/phy/Makefile > > @@ -34,6 +34,7 @@ phy-exynos-usb2-$(CONFIG_PHY_S5PV210_USB2) += > > phy-s5pv210-usb2.o> > > obj-$(CONFIG_PHY_EXYNOS5_USBDRD) += phy-exynos5-usbdrd.o > > obj-$(CONFIG_PHY_QCOM_APQ8064_SATA) += phy-qcom-apq8064-sata.o > > obj-$(CONFIG_PHY_ROCKCHIP_USB) += phy-rockchip-usb.o > > > > +obj-$(CONFIG_PHY_ROCKCHIP_DP) += phy-rockchip-dp.o > > > > obj-$(CONFIG_PHY_QCOM_IPQ806X_SATA) += phy-qcom-ipq806x-sata.o > > obj-$(CONFIG_PHY_ST_SPEAR1310_MIPHY) += phy-spear1310-miphy.o > > obj-$(CONFIG_PHY_ST_SPEAR1340_MIPHY) += phy-spear1340-miphy.o > > > > diff --git a/drivers/phy/phy-rockchip-dp.c b/drivers/phy/phy-rockchip-dp.c > > new file mode 100644 > > index 0000000..3a2ac120 > > --- /dev/null > > +++ b/drivers/phy/phy-rockchip-dp.c > > @@ -0,0 +1,151 @@ > > +/* > > + * Rockchip DP PHY driver > > + * > > + * Copyright (C) 2015 FuZhou Rockchip Co., Ltd. > > + * Author: Yakir Yang <ykk@@rock-chips.com> > > + * > > + * This program is free software; you can redistribute it and/or modify > > + * it under the terms of the GNU General Public License as published by > > + * the Free Software Foundation; either version 2 of the License. > > + */ > > + > > +#include <linux/io.h> > > +#include <linux/kernel.h> > > +#include <linux/module.h> > > +#include <linux/of.h> > > +#include <linux/of_address.h> > > +#include <linux/clk.h> > > +#include <linux/phy/phy.h> > > +#include <linux/regmap.h> > > +#include <linux/mfd/syscon.h> > > +#include <linux/platform_device.h> > > + > > +#define GRF_SOC_CON12 0x0274 > > +#define GRF_EDP_REF_CLK_SEL_INTER BIT(4) > > +#define GRF_EDP_PHY_SIDDQ_WRITE_EN BIT(21) > > +#define GRF_EDP_PHY_SIDDQ_ON 0 > > +#define GRF_EDP_PHY_SIDDQ_OFF BIT(5) > > + > > +struct rockchip_dp_phy { > > + struct device *dev; > > + struct regmap *grf; > > + struct clk *phy_24m; > > +}; > > + > > +static int rockchip_set_phy_state(struct phy *phy, bool enable) > > +{ > > + struct rockchip_dp_phy *dp = phy_get_drvdata(phy); > > + int ret; > > + > > + if (enable) { > > + ret = clk_prepare_enable(dp->phy_24m); > > + if (ret < 0) { > > + dev_err(dp->dev, "Can't enable clock 24m %d\n", ret); > > + return ret; > > + } > > + > > + ret = regmap_write(dp->grf, GRF_SOC_CON12, > > + GRF_EDP_PHY_SIDDQ_WRITE_EN | > > + GRF_EDP_PHY_SIDDQ_ON); > > + } else { > > + clk_disable_unprepare(dp->phy_24m); > > should clk_disable come after regmap_write? It'll be symmetric to enable? > > > + ret = regmap_write(dp->grf, GRF_SOC_CON12, > > + GRF_EDP_PHY_SIDDQ_WRITE_EN | > > + GRF_EDP_PHY_SIDDQ_OFF); > > Is this syscon register used only by Display Port PHY? Better to use > regmap_update API? Rockchip's GRF syscon registers use what gets called "Hiword-mask", so when writing you actually need to set the write-enable bit (x+16, like GRF_EDP_PHY_SIDDQ_WRITE_EN here) if you want to set bit x. No other bits get affected by this. Heiko -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Kishon On 10/12/2015 11:02 PM, Kishon Vijay Abraham I wrote: > Hi, > > On Saturday 10 October 2015 09:25 PM, Yakir Yang wrote: >> This phy driver would control the Rockchip DisplayPort module >> phy clock and phy power, it is relate to analogix_dp-rockchip >> dp driver. If you want DP works rightly on rockchip platform, >> then you should select both of them. > Add phy driver for the Rockchip DisplayPort PHY module. This is required > to get DisplayPort working in Rockchip SoCs. Thanks, take point. >> Signed-off-by: Yakir Yang <ykk@rock-chips.com> >> --- >> Changes in v6: None >> Changes in v5: >> - Remove "reg" DT property, cause driver could poweron/poweroff phy via >> the exist "grf" syscon already. And rename the example DT node from >> "edp_phy: phy@ff770274" to "edp_phy: edp-phy" directly. (Heiko) >> - Add deivce_node at the front of driver, update phy_ops type from "static >> struct" to "static const struct". And correct the input paramters of >> devm_phy_create() interfaces. (Heiko) >> >> Changes in v4: >> - Add commit message, and remove the redundant rockchip_dp_phy_init() >> function, move those code to probe() method. And remove driver .owner >> number. (Kishon) >> >> Changes in v3: >> - Suggest, add rockchip dp phy driver, collect the phy clocks and >> power control. (Heiko) >> >> Changes in v2: None >> >> drivers/phy/Kconfig | 7 ++ >> drivers/phy/Makefile | 1 + >> drivers/phy/phy-rockchip-dp.c | 151 ++++++++++++++++++++++++++++++++++++++++++ >> 3 files changed, 159 insertions(+) >> create mode 100644 drivers/phy/phy-rockchip-dp.c >> >> diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig >> index 47da573..8f2bc4f 100644 >> --- a/drivers/phy/Kconfig >> +++ b/drivers/phy/Kconfig >> @@ -310,6 +310,13 @@ config PHY_ROCKCHIP_USB >> help >> Enable this to support the Rockchip USB 2.0 PHY. >> >> +config PHY_ROCKCHIP_DP >> + tristate "Rockchip Display Port PHY Driver" >> + depends on ARCH_ROCKCHIP && OF >> + select GENERIC_PHY >> + help >> + Enable this to support the Rockchip Display Port PHY. >> + >> config PHY_ST_SPEAR1310_MIPHY >> tristate "ST SPEAR1310-MIPHY driver" >> select GENERIC_PHY >> diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile >> index a5b18c1..e281f35 100644 >> --- a/drivers/phy/Makefile >> +++ b/drivers/phy/Makefile >> @@ -34,6 +34,7 @@ phy-exynos-usb2-$(CONFIG_PHY_S5PV210_USB2) += phy-s5pv210-usb2.o >> obj-$(CONFIG_PHY_EXYNOS5_USBDRD) += phy-exynos5-usbdrd.o >> obj-$(CONFIG_PHY_QCOM_APQ8064_SATA) += phy-qcom-apq8064-sata.o >> obj-$(CONFIG_PHY_ROCKCHIP_USB) += phy-rockchip-usb.o >> +obj-$(CONFIG_PHY_ROCKCHIP_DP) += phy-rockchip-dp.o >> obj-$(CONFIG_PHY_QCOM_IPQ806X_SATA) += phy-qcom-ipq806x-sata.o >> obj-$(CONFIG_PHY_ST_SPEAR1310_MIPHY) += phy-spear1310-miphy.o >> obj-$(CONFIG_PHY_ST_SPEAR1340_MIPHY) += phy-spear1340-miphy.o >> diff --git a/drivers/phy/phy-rockchip-dp.c b/drivers/phy/phy-rockchip-dp.c >> new file mode 100644 >> index 0000000..3a2ac120 >> --- /dev/null >> +++ b/drivers/phy/phy-rockchip-dp.c >> @@ -0,0 +1,151 @@ >> +/* >> + * Rockchip DP PHY driver >> + * >> + * Copyright (C) 2015 FuZhou Rockchip Co., Ltd. >> + * Author: Yakir Yang <ykk@@rock-chips.com> >> + * >> + * This program is free software; you can redistribute it and/or modify >> + * it under the terms of the GNU General Public License as published by >> + * the Free Software Foundation; either version 2 of the License. >> + */ >> + >> +#include <linux/io.h> >> +#include <linux/kernel.h> >> +#include <linux/module.h> >> +#include <linux/of.h> >> +#include <linux/of_address.h> >> +#include <linux/clk.h> >> +#include <linux/phy/phy.h> >> +#include <linux/regmap.h> >> +#include <linux/mfd/syscon.h> >> +#include <linux/platform_device.h> >> + >> +#define GRF_SOC_CON12 0x0274 >> +#define GRF_EDP_REF_CLK_SEL_INTER BIT(4) >> +#define GRF_EDP_PHY_SIDDQ_WRITE_EN BIT(21) >> +#define GRF_EDP_PHY_SIDDQ_ON 0 >> +#define GRF_EDP_PHY_SIDDQ_OFF BIT(5) >> + >> +struct rockchip_dp_phy { >> + struct device *dev; >> + struct regmap *grf; >> + struct clk *phy_24m; >> +}; >> + >> +static int rockchip_set_phy_state(struct phy *phy, bool enable) >> +{ >> + struct rockchip_dp_phy *dp = phy_get_drvdata(phy); >> + int ret; >> + >> + if (enable) { >> + ret = clk_prepare_enable(dp->phy_24m); >> + if (ret < 0) { >> + dev_err(dp->dev, "Can't enable clock 24m %d\n", ret); >> + return ret; >> + } >> + >> + ret = regmap_write(dp->grf, GRF_SOC_CON12, >> + GRF_EDP_PHY_SIDDQ_WRITE_EN | >> + GRF_EDP_PHY_SIDDQ_ON); >> + } else { >> + clk_disable_unprepare(dp->phy_24m); > should clk_disable come after regmap_write? It'll be symmetric to enable? I don't see there is a strict limit about this, but thanks for your point, I would like to change this order to: if (enable) { // Enable SIDDQ power // Enable Clock } else { // Disable Clock // Disable SIDDQ power } >> + ret = regmap_write(dp->grf, GRF_SOC_CON12, >> + GRF_EDP_PHY_SIDDQ_WRITE_EN | >> + GRF_EDP_PHY_SIDDQ_OFF); > Is this syscon register used only by Display Port PHY? Better to use > regmap_update API? Thanks to Heiko explain, writing you actually need to set the write-enable bit, some kind of hardware regmap_update. Thanks, - Yakir > Thanks > Kishon > > > -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig index 47da573..8f2bc4f 100644 --- a/drivers/phy/Kconfig +++ b/drivers/phy/Kconfig @@ -310,6 +310,13 @@ config PHY_ROCKCHIP_USB help Enable this to support the Rockchip USB 2.0 PHY. +config PHY_ROCKCHIP_DP + tristate "Rockchip Display Port PHY Driver" + depends on ARCH_ROCKCHIP && OF + select GENERIC_PHY + help + Enable this to support the Rockchip Display Port PHY. + config PHY_ST_SPEAR1310_MIPHY tristate "ST SPEAR1310-MIPHY driver" select GENERIC_PHY diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile index a5b18c1..e281f35 100644 --- a/drivers/phy/Makefile +++ b/drivers/phy/Makefile @@ -34,6 +34,7 @@ phy-exynos-usb2-$(CONFIG_PHY_S5PV210_USB2) += phy-s5pv210-usb2.o obj-$(CONFIG_PHY_EXYNOS5_USBDRD) += phy-exynos5-usbdrd.o obj-$(CONFIG_PHY_QCOM_APQ8064_SATA) += phy-qcom-apq8064-sata.o obj-$(CONFIG_PHY_ROCKCHIP_USB) += phy-rockchip-usb.o +obj-$(CONFIG_PHY_ROCKCHIP_DP) += phy-rockchip-dp.o obj-$(CONFIG_PHY_QCOM_IPQ806X_SATA) += phy-qcom-ipq806x-sata.o obj-$(CONFIG_PHY_ST_SPEAR1310_MIPHY) += phy-spear1310-miphy.o obj-$(CONFIG_PHY_ST_SPEAR1340_MIPHY) += phy-spear1340-miphy.o diff --git a/drivers/phy/phy-rockchip-dp.c b/drivers/phy/phy-rockchip-dp.c new file mode 100644 index 0000000..3a2ac120 --- /dev/null +++ b/drivers/phy/phy-rockchip-dp.c @@ -0,0 +1,151 @@ +/* + * Rockchip DP PHY driver + * + * Copyright (C) 2015 FuZhou Rockchip Co., Ltd. + * Author: Yakir Yang <ykk@@rock-chips.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License. + */ + +#include <linux/io.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/clk.h> +#include <linux/phy/phy.h> +#include <linux/regmap.h> +#include <linux/mfd/syscon.h> +#include <linux/platform_device.h> + +#define GRF_SOC_CON12 0x0274 +#define GRF_EDP_REF_CLK_SEL_INTER BIT(4) +#define GRF_EDP_PHY_SIDDQ_WRITE_EN BIT(21) +#define GRF_EDP_PHY_SIDDQ_ON 0 +#define GRF_EDP_PHY_SIDDQ_OFF BIT(5) + +struct rockchip_dp_phy { + struct device *dev; + struct regmap *grf; + struct clk *phy_24m; +}; + +static int rockchip_set_phy_state(struct phy *phy, bool enable) +{ + struct rockchip_dp_phy *dp = phy_get_drvdata(phy); + int ret; + + if (enable) { + ret = clk_prepare_enable(dp->phy_24m); + if (ret < 0) { + dev_err(dp->dev, "Can't enable clock 24m %d\n", ret); + return ret; + } + + ret = regmap_write(dp->grf, GRF_SOC_CON12, + GRF_EDP_PHY_SIDDQ_WRITE_EN | + GRF_EDP_PHY_SIDDQ_ON); + } else { + clk_disable_unprepare(dp->phy_24m); + ret = regmap_write(dp->grf, GRF_SOC_CON12, + GRF_EDP_PHY_SIDDQ_WRITE_EN | + GRF_EDP_PHY_SIDDQ_OFF); + } + + return ret; +} + +static int rockchip_dp_phy_power_on(struct phy *phy) +{ + return rockchip_set_phy_state(phy, true); +} + +static int rockchip_dp_phy_power_off(struct phy *phy) +{ + return rockchip_set_phy_state(phy, false); +} + +static const struct phy_ops rockchip_dp_phy_ops = { + .power_on = rockchip_dp_phy_power_on, + .power_off = rockchip_dp_phy_power_off, + .owner = THIS_MODULE, +}; + +static int rockchip_dp_phy_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct device_node *np = dev->of_node; + struct phy_provider *phy_provider; + struct rockchip_dp_phy *dp; + struct resource *res; + struct phy *phy; + int ret; + + if (!np) + return -ENODEV; + + dp = devm_kzalloc(dev, sizeof(*dp), GFP_KERNEL); + if (IS_ERR(dp)) + return -ENOMEM; + + dp->dev = dev; + + dp->phy_24m = devm_clk_get(dev, "24m"); + if (IS_ERR(dp->phy_24m)) { + dev_err(dev, "cannot get clock 24m\n"); + return PTR_ERR(dp->phy_24m); + } + + ret = clk_set_rate(dp->phy_24m, 24000000); + if (ret < 0) { + dev_err(dp->dev, "cannot set clock phy_24m %d\n", ret); + return ret; + } + + dp->grf = syscon_regmap_lookup_by_phandle(np, "rockchip,grf"); + if (IS_ERR(dp->grf)) { + dev_err(dev, "rk3288-dp needs rockchip,grf property\n"); + return PTR_ERR(dp->grf); + } + + ret = regmap_write(dp->grf, GRF_SOC_CON12, GRF_EDP_REF_CLK_SEL_INTER | + (GRF_EDP_REF_CLK_SEL_INTER << 16)); + if (ret != 0) { + dev_err(dp->dev, "Could not config GRF edp ref clk: %d\n", ret); + return ret; + } + + phy = devm_phy_create(dev, np, &rockchip_dp_phy_ops); + if (IS_ERR(phy)) { + dev_err(dev, "failed to create phy\n"); + return PTR_ERR(phy); + } + phy_set_drvdata(phy, dp); + + phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); + + return PTR_ERR_OR_ZERO(phy_provider); +} + +static const struct of_device_id rockchip_dp_phy_dt_ids[] = { + { .compatible = "rockchip,rk3288-dp-phy" }, + {} +}; + +MODULE_DEVICE_TABLE(of, rockchip_dp_phy_dt_ids); + +static struct platform_driver rockchip_dp_phy_driver = { + .probe = rockchip_dp_phy_probe, + .driver = { + .name = "rockchip-dp-phy", + .of_match_table = rockchip_dp_phy_dt_ids, + }, +}; + +module_platform_driver(rockchip_dp_phy_driver); + +MODULE_AUTHOR("Yakir Yang <ykk@rock-chips.com>"); +MODULE_DESCRIPTION("Rockchip DP PHY driver"); +MODULE_LICENSE("GPL v2");
This phy driver would control the Rockchip DisplayPort module phy clock and phy power, it is relate to analogix_dp-rockchip dp driver. If you want DP works rightly on rockchip platform, then you should select both of them. Signed-off-by: Yakir Yang <ykk@rock-chips.com> --- Changes in v6: None Changes in v5: - Remove "reg" DT property, cause driver could poweron/poweroff phy via the exist "grf" syscon already. And rename the example DT node from "edp_phy: phy@ff770274" to "edp_phy: edp-phy" directly. (Heiko) - Add deivce_node at the front of driver, update phy_ops type from "static struct" to "static const struct". And correct the input paramters of devm_phy_create() interfaces. (Heiko) Changes in v4: - Add commit message, and remove the redundant rockchip_dp_phy_init() function, move those code to probe() method. And remove driver .owner number. (Kishon) Changes in v3: - Suggest, add rockchip dp phy driver, collect the phy clocks and power control. (Heiko) Changes in v2: None drivers/phy/Kconfig | 7 ++ drivers/phy/Makefile | 1 + drivers/phy/phy-rockchip-dp.c | 151 ++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 159 insertions(+) create mode 100644 drivers/phy/phy-rockchip-dp.c