| Message ID | 1457921056-21257-11-git-send-email-cw00.choi@samsung.com (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
On 14.03.2016 11:04, Chanwoo Choi wrote: > From: Jaehoon Chung <jh80.chung@samsung.com> > > This patch adds MSHC (Mobile Storage Host Controller) dt node for > Exynos3250 SoC. MSHC is an interface between the system and the SD card > > Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> > Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> > --- > arch/arm/boot/dts/exynos3250-artik5-devel.dts | 16 ++++++++++++++++ > 1 file changed, 16 insertions(+) > > diff --git a/arch/arm/boot/dts/exynos3250-artik5-devel.dts b/arch/arm/boot/dts/exynos3250-artik5-devel.dts > index d17c28969118..a371baf8536d 100644 > --- a/arch/arm/boot/dts/exynos3250-artik5-devel.dts > +++ b/arch/arm/boot/dts/exynos3250-artik5-devel.dts > @@ -21,6 +21,22 @@ > "samsung,exynos3250", "samsung,exynos3"; > }; > > +&mshc_2 { > + num-slots = <1>; > + cap-sd-highspeed; > + disable-wp; > + card-detect-delay = <200>; > + clock-frequency = <100000000>; > + clock-freq-min-max = <400000 100000000>; > + samsung,dw-mshc-ciu-div = <1>; > + samsung,dw-mshc-sdr-timing = <0 1>; > + samsung,dw-mshc-ddr-timing = <1 2>; > + pinctrl-names = "default"; > + pinctrl-0 = <&sd2_cmd &sd2_clk &sd2_cd &sd2_bus1 &sd2_bus4>; > + bus-width = <4>; > + status = "okay"; vqmmc-supply = ldo3? Best regards, Krzysztof > +}; > + > &serial_2 { > status = "okay"; > }; > -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 2016? 03? 14? 17:31, Krzysztof Kozlowski wrote: > On 14.03.2016 11:04, Chanwoo Choi wrote: >> From: Jaehoon Chung <jh80.chung@samsung.com> >> >> This patch adds MSHC (Mobile Storage Host Controller) dt node for >> Exynos3250 SoC. MSHC is an interface between the system and the SD card >> >> Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> >> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> >> --- >> arch/arm/boot/dts/exynos3250-artik5-devel.dts | 16 ++++++++++++++++ >> 1 file changed, 16 insertions(+) >> >> diff --git a/arch/arm/boot/dts/exynos3250-artik5-devel.dts b/arch/arm/boot/dts/exynos3250-artik5-devel.dts >> index d17c28969118..a371baf8536d 100644 >> --- a/arch/arm/boot/dts/exynos3250-artik5-devel.dts >> +++ b/arch/arm/boot/dts/exynos3250-artik5-devel.dts >> @@ -21,6 +21,22 @@ >> "samsung,exynos3250", "samsung,exynos3"; >> }; >> >> +&mshc_2 { >> + num-slots = <1>; >> + cap-sd-highspeed; >> + disable-wp; >> + card-detect-delay = <200>; >> + clock-frequency = <100000000>; >> + clock-freq-min-max = <400000 100000000>; >> + samsung,dw-mshc-ciu-div = <1>; >> + samsung,dw-mshc-sdr-timing = <0 1>; >> + samsung,dw-mshc-ddr-timing = <1 2>; >> + pinctrl-names = "default"; >> + pinctrl-0 = <&sd2_cmd &sd2_clk &sd2_cd &sd2_bus1 &sd2_bus4>; >> + bus-width = <4>; >> + status = "okay"; > > vqmmc-supply = ldo3? ldo3 is always on state because ldo3 is used for various IP in exynos3250. I think that we had better to remain always on state for ldo3. Best Regards, Chanwoo Choi -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 14.03.2016 17:48, Chanwoo Choi wrote: > On 2016? 03? 14? 17:31, Krzysztof Kozlowski wrote: >> On 14.03.2016 11:04, Chanwoo Choi wrote: >>> From: Jaehoon Chung <jh80.chung@samsung.com> >>> >>> This patch adds MSHC (Mobile Storage Host Controller) dt node for >>> Exynos3250 SoC. MSHC is an interface between the system and the SD card >>> >>> Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> >>> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> >>> --- >>> arch/arm/boot/dts/exynos3250-artik5-devel.dts | 16 ++++++++++++++++ >>> 1 file changed, 16 insertions(+) >>> >>> diff --git a/arch/arm/boot/dts/exynos3250-artik5-devel.dts b/arch/arm/boot/dts/exynos3250-artik5-devel.dts >>> index d17c28969118..a371baf8536d 100644 >>> --- a/arch/arm/boot/dts/exynos3250-artik5-devel.dts >>> +++ b/arch/arm/boot/dts/exynos3250-artik5-devel.dts >>> @@ -21,6 +21,22 @@ >>> "samsung,exynos3250", "samsung,exynos3"; >>> }; >>> >>> +&mshc_2 { >>> + num-slots = <1>; >>> + cap-sd-highspeed; >>> + disable-wp; >>> + card-detect-delay = <200>; >>> + clock-frequency = <100000000>; >>> + clock-freq-min-max = <400000 100000000>; >>> + samsung,dw-mshc-ciu-div = <1>; >>> + samsung,dw-mshc-sdr-timing = <0 1>; >>> + samsung,dw-mshc-ddr-timing = <1 2>; >>> + pinctrl-names = "default"; >>> + pinctrl-0 = <&sd2_cmd &sd2_clk &sd2_cd &sd2_bus1 &sd2_bus4>; >>> + bus-width = <4>; >>> + status = "okay"; >> >> vqmmc-supply = ldo3? > > ldo3 is always on state because ldo3 is used for various IP in exynos3250. > I think that we had better to remain always on state for ldo3. Yes, I wasn't thinking about toggling ldo3 but about taking the regulator here to model the dependencies between components. Best regards, Krzysztof -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 2016? 03? 14? 18:44, Krzysztof Kozlowski wrote: > On 14.03.2016 17:48, Chanwoo Choi wrote: >> On 2016? 03? 14? 17:31, Krzysztof Kozlowski wrote: >>> On 14.03.2016 11:04, Chanwoo Choi wrote: >>>> From: Jaehoon Chung <jh80.chung@samsung.com> >>>> >>>> This patch adds MSHC (Mobile Storage Host Controller) dt node for >>>> Exynos3250 SoC. MSHC is an interface between the system and the SD card >>>> >>>> Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> >>>> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> >>>> --- >>>> arch/arm/boot/dts/exynos3250-artik5-devel.dts | 16 ++++++++++++++++ >>>> 1 file changed, 16 insertions(+) >>>> >>>> diff --git a/arch/arm/boot/dts/exynos3250-artik5-devel.dts b/arch/arm/boot/dts/exynos3250-artik5-devel.dts >>>> index d17c28969118..a371baf8536d 100644 >>>> --- a/arch/arm/boot/dts/exynos3250-artik5-devel.dts >>>> +++ b/arch/arm/boot/dts/exynos3250-artik5-devel.dts >>>> @@ -21,6 +21,22 @@ >>>> "samsung,exynos3250", "samsung,exynos3"; >>>> }; >>>> >>>> +&mshc_2 { >>>> + num-slots = <1>; >>>> + cap-sd-highspeed; >>>> + disable-wp; >>>> + card-detect-delay = <200>; >>>> + clock-frequency = <100000000>; >>>> + clock-freq-min-max = <400000 100000000>; >>>> + samsung,dw-mshc-ciu-div = <1>; >>>> + samsung,dw-mshc-sdr-timing = <0 1>; >>>> + samsung,dw-mshc-ddr-timing = <1 2>; >>>> + pinctrl-names = "default"; >>>> + pinctrl-0 = <&sd2_cmd &sd2_clk &sd2_cd &sd2_bus1 &sd2_bus4>; >>>> + bus-width = <4>; >>>> + status = "okay"; >>> >>> vqmmc-supply = ldo3? >> >> ldo3 is always on state because ldo3 is used for various IP in exynos3250. >> I think that we had better to remain always on state for ldo3. > > Yes, I wasn't thinking about toggling ldo3 but about taking the > regulator here to model the dependencies between components. Okay. I'll add it as following: vmmc-supply = <&ldo18_reg>; vqmmc-supply = <&ldo3>; Best Regards, Chanwoo Choi -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 14.03.2016 19:22, Chanwoo Choi wrote: > On 2016? 03? 14? 18:44, Krzysztof Kozlowski wrote: >> On 14.03.2016 17:48, Chanwoo Choi wrote: >>> On 2016? 03? 14? 17:31, Krzysztof Kozlowski wrote: >>>> On 14.03.2016 11:04, Chanwoo Choi wrote: >>>>> From: Jaehoon Chung <jh80.chung@samsung.com> >>>>> >>>>> This patch adds MSHC (Mobile Storage Host Controller) dt node for >>>>> Exynos3250 SoC. MSHC is an interface between the system and the SD card >>>>> >>>>> Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> >>>>> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> >>>>> --- >>>>> arch/arm/boot/dts/exynos3250-artik5-devel.dts | 16 ++++++++++++++++ >>>>> 1 file changed, 16 insertions(+) >>>>> >>>>> diff --git a/arch/arm/boot/dts/exynos3250-artik5-devel.dts b/arch/arm/boot/dts/exynos3250-artik5-devel.dts >>>>> index d17c28969118..a371baf8536d 100644 >>>>> --- a/arch/arm/boot/dts/exynos3250-artik5-devel.dts >>>>> +++ b/arch/arm/boot/dts/exynos3250-artik5-devel.dts >>>>> @@ -21,6 +21,22 @@ >>>>> "samsung,exynos3250", "samsung,exynos3"; >>>>> }; >>>>> >>>>> +&mshc_2 { >>>>> + num-slots = <1>; >>>>> + cap-sd-highspeed; >>>>> + disable-wp; >>>>> + card-detect-delay = <200>; >>>>> + clock-frequency = <100000000>; >>>>> + clock-freq-min-max = <400000 100000000>; >>>>> + samsung,dw-mshc-ciu-div = <1>; >>>>> + samsung,dw-mshc-sdr-timing = <0 1>; >>>>> + samsung,dw-mshc-ddr-timing = <1 2>; >>>>> + pinctrl-names = "default"; >>>>> + pinctrl-0 = <&sd2_cmd &sd2_clk &sd2_cd &sd2_bus1 &sd2_bus4>; >>>>> + bus-width = <4>; >>>>> + status = "okay"; >>>> >>>> vqmmc-supply = ldo3? >>> >>> ldo3 is always on state because ldo3 is used for various IP in exynos3250. >>> I think that we had better to remain always on state for ldo3. >> >> Yes, I wasn't thinking about toggling ldo3 but about taking the >> regulator here to model the dependencies between components. > > Okay. I'll add it as following: > > vmmc-supply = <&ldo18_reg>; > vqmmc-supply = <&ldo3>; ldo18 is not used by mshc2. At least my schematics show that LDO3 goes to DVDD_MMC2 (on different board revision that would be ldo18 instead of ldo3, but not both). The card itself is powered by VDDFLASH_28/MAIN_BAT. BR, Krzysztof -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 03/15/2016 09:25 AM, Krzysztof Kozlowski wrote: > On 14.03.2016 19:22, Chanwoo Choi wrote: >> On 2016? 03? 14? 18:44, Krzysztof Kozlowski wrote: >>> On 14.03.2016 17:48, Chanwoo Choi wrote: >>>> On 2016? 03? 14? 17:31, Krzysztof Kozlowski wrote: >>>>> On 14.03.2016 11:04, Chanwoo Choi wrote: >>>>>> From: Jaehoon Chung <jh80.chung@samsung.com> >>>>>> >>>>>> This patch adds MSHC (Mobile Storage Host Controller) dt node for >>>>>> Exynos3250 SoC. MSHC is an interface between the system and the SD card >>>>>> >>>>>> Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> >>>>>> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> >>>>>> --- >>>>>> arch/arm/boot/dts/exynos3250-artik5-devel.dts | 16 ++++++++++++++++ >>>>>> 1 file changed, 16 insertions(+) >>>>>> >>>>>> diff --git a/arch/arm/boot/dts/exynos3250-artik5-devel.dts b/arch/arm/boot/dts/exynos3250-artik5-devel.dts >>>>>> index d17c28969118..a371baf8536d 100644 >>>>>> --- a/arch/arm/boot/dts/exynos3250-artik5-devel.dts >>>>>> +++ b/arch/arm/boot/dts/exynos3250-artik5-devel.dts >>>>>> @@ -21,6 +21,22 @@ >>>>>> "samsung,exynos3250", "samsung,exynos3"; >>>>>> }; >>>>>> >>>>>> +&mshc_2 { >>>>>> + num-slots = <1>; >>>>>> + cap-sd-highspeed; >>>>>> + disable-wp; >>>>>> + card-detect-delay = <200>; >>>>>> + clock-frequency = <100000000>; >>>>>> + clock-freq-min-max = <400000 100000000>; >>>>>> + samsung,dw-mshc-ciu-div = <1>; >>>>>> + samsung,dw-mshc-sdr-timing = <0 1>; >>>>>> + samsung,dw-mshc-ddr-timing = <1 2>; >>>>>> + pinctrl-names = "default"; >>>>>> + pinctrl-0 = <&sd2_cmd &sd2_clk &sd2_cd &sd2_bus1 &sd2_bus4>; >>>>>> + bus-width = <4>; >>>>>> + status = "okay"; >>>>> >>>>> vqmmc-supply = ldo3? >>>> >>>> ldo3 is always on state because ldo3 is used for various IP in exynos3250. >>>> I think that we had better to remain always on state for ldo3. >>> >>> Yes, I wasn't thinking about toggling ldo3 but about taking the >>> regulator here to model the dependencies between components. >> >> Okay. I'll add it as following: >> >> vmmc-supply = <&ldo18_reg>; >> vqmmc-supply = <&ldo3>; > > ldo18 is not used by mshc2. At least my schematics show that LDO3 goes > to DVDD_MMC2 (on different board revision that would be ldo18 instead of > ldo3, but not both). It's confusing..but it seems that Krzysztof's opinion is right. Best Regards, Jaehoon Chung > > The card itself is powered by VDDFLASH_28/MAIN_BAT. > > BR, > Krzysztof > > -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 2016? 03? 15? 09:56, Jaehoon Chung wrote: > On 03/15/2016 09:25 AM, Krzysztof Kozlowski wrote: >> On 14.03.2016 19:22, Chanwoo Choi wrote: >>> On 2016? 03? 14? 18:44, Krzysztof Kozlowski wrote: >>>> On 14.03.2016 17:48, Chanwoo Choi wrote: >>>>> On 2016? 03? 14? 17:31, Krzysztof Kozlowski wrote: >>>>>> On 14.03.2016 11:04, Chanwoo Choi wrote: >>>>>>> From: Jaehoon Chung <jh80.chung@samsung.com> >>>>>>> >>>>>>> This patch adds MSHC (Mobile Storage Host Controller) dt node for >>>>>>> Exynos3250 SoC. MSHC is an interface between the system and the SD card >>>>>>> >>>>>>> Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> >>>>>>> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> >>>>>>> --- >>>>>>> arch/arm/boot/dts/exynos3250-artik5-devel.dts | 16 ++++++++++++++++ >>>>>>> 1 file changed, 16 insertions(+) >>>>>>> >>>>>>> diff --git a/arch/arm/boot/dts/exynos3250-artik5-devel.dts b/arch/arm/boot/dts/exynos3250-artik5-devel.dts >>>>>>> index d17c28969118..a371baf8536d 100644 >>>>>>> --- a/arch/arm/boot/dts/exynos3250-artik5-devel.dts >>>>>>> +++ b/arch/arm/boot/dts/exynos3250-artik5-devel.dts >>>>>>> @@ -21,6 +21,22 @@ >>>>>>> "samsung,exynos3250", "samsung,exynos3"; >>>>>>> }; >>>>>>> >>>>>>> +&mshc_2 { >>>>>>> + num-slots = <1>; >>>>>>> + cap-sd-highspeed; >>>>>>> + disable-wp; >>>>>>> + card-detect-delay = <200>; >>>>>>> + clock-frequency = <100000000>; >>>>>>> + clock-freq-min-max = <400000 100000000>; >>>>>>> + samsung,dw-mshc-ciu-div = <1>; >>>>>>> + samsung,dw-mshc-sdr-timing = <0 1>; >>>>>>> + samsung,dw-mshc-ddr-timing = <1 2>; >>>>>>> + pinctrl-names = "default"; >>>>>>> + pinctrl-0 = <&sd2_cmd &sd2_clk &sd2_cd &sd2_bus1 &sd2_bus4>; >>>>>>> + bus-width = <4>; >>>>>>> + status = "okay"; >>>>>> >>>>>> vqmmc-supply = ldo3? >>>>> >>>>> ldo3 is always on state because ldo3 is used for various IP in exynos3250. >>>>> I think that we had better to remain always on state for ldo3. >>>> >>>> Yes, I wasn't thinking about toggling ldo3 but about taking the >>>> regulator here to model the dependencies between components. >>> >>> Okay. I'll add it as following: >>> >>> vmmc-supply = <&ldo18_reg>; >>> vqmmc-supply = <&ldo3>; >> >> ldo18 is not used by mshc2. At least my schematics show that LDO3 goes >> to DVDD_MMC2 (on different board revision that would be ldo18 instead of >> ldo3, but not both). ARTIK5 schema document VLDO18 and VLDO3 are connected to DVDD_MMC2_AP. But, I'm not sure what is meaning. So, I'll drop the 'vmmc-supply' > > It's confusing..but it seems that Krzysztof's opinion is right. > > Best Regards, > Jaehoon Chung > >> >> The card itself is powered by VDDFLASH_28/MAIN_BAT. You're right. OK, I'll modify it with only vqmmc-supply = <&ldo3>; Best Regards, Chanwoo Choi -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 2016? 03? 15? 10:45, Chanwoo Choi wrote: > On 2016? 03? 15? 09:56, Jaehoon Chung wrote: >> On 03/15/2016 09:25 AM, Krzysztof Kozlowski wrote: >>> On 14.03.2016 19:22, Chanwoo Choi wrote: >>>> On 2016? 03? 14? 18:44, Krzysztof Kozlowski wrote: >>>>> On 14.03.2016 17:48, Chanwoo Choi wrote: >>>>>> On 2016? 03? 14? 17:31, Krzysztof Kozlowski wrote: >>>>>>> On 14.03.2016 11:04, Chanwoo Choi wrote: >>>>>>>> From: Jaehoon Chung <jh80.chung@samsung.com> >>>>>>>> >>>>>>>> This patch adds MSHC (Mobile Storage Host Controller) dt node for >>>>>>>> Exynos3250 SoC. MSHC is an interface between the system and the SD card >>>>>>>> >>>>>>>> Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> >>>>>>>> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> >>>>>>>> --- >>>>>>>> arch/arm/boot/dts/exynos3250-artik5-devel.dts | 16 ++++++++++++++++ >>>>>>>> 1 file changed, 16 insertions(+) >>>>>>>> >>>>>>>> diff --git a/arch/arm/boot/dts/exynos3250-artik5-devel.dts b/arch/arm/boot/dts/exynos3250-artik5-devel.dts >>>>>>>> index d17c28969118..a371baf8536d 100644 >>>>>>>> --- a/arch/arm/boot/dts/exynos3250-artik5-devel.dts >>>>>>>> +++ b/arch/arm/boot/dts/exynos3250-artik5-devel.dts >>>>>>>> @@ -21,6 +21,22 @@ >>>>>>>> "samsung,exynos3250", "samsung,exynos3"; >>>>>>>> }; >>>>>>>> >>>>>>>> +&mshc_2 { >>>>>>>> + num-slots = <1>; >>>>>>>> + cap-sd-highspeed; >>>>>>>> + disable-wp; >>>>>>>> + card-detect-delay = <200>; >>>>>>>> + clock-frequency = <100000000>; >>>>>>>> + clock-freq-min-max = <400000 100000000>; >>>>>>>> + samsung,dw-mshc-ciu-div = <1>; >>>>>>>> + samsung,dw-mshc-sdr-timing = <0 1>; >>>>>>>> + samsung,dw-mshc-ddr-timing = <1 2>; >>>>>>>> + pinctrl-names = "default"; >>>>>>>> + pinctrl-0 = <&sd2_cmd &sd2_clk &sd2_cd &sd2_bus1 &sd2_bus4>; >>>>>>>> + bus-width = <4>; >>>>>>>> + status = "okay"; >>>>>>> >>>>>>> vqmmc-supply = ldo3? >>>>>> >>>>>> ldo3 is always on state because ldo3 is used for various IP in exynos3250. >>>>>> I think that we had better to remain always on state for ldo3. >>>>> >>>>> Yes, I wasn't thinking about toggling ldo3 but about taking the >>>>> regulator here to model the dependencies between components. >>>> >>>> Okay. I'll add it as following: >>>> >>>> vmmc-supply = <&ldo18_reg>; >>>> vqmmc-supply = <&ldo3>; >>> >>> ldo18 is not used by mshc2. At least my schematics show that LDO3 goes >>> to DVDD_MMC2 (on different board revision that would be ldo18 instead of >>> ldo3, but not both). > > ARTIK5 schema document VLDO18 and VLDO3 are connected to DVDD_MMC2_AP. > But, I'm not sure what is meaning. So, I'll drop the 'vmmc-supply' VLDO18 is not connected to DVDD_MMC2_AP. It is NC state. Sorry for confusion. Best Regards, Chanwoo Choi [snip] -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/arch/arm/boot/dts/exynos3250-artik5-devel.dts b/arch/arm/boot/dts/exynos3250-artik5-devel.dts index d17c28969118..a371baf8536d 100644 --- a/arch/arm/boot/dts/exynos3250-artik5-devel.dts +++ b/arch/arm/boot/dts/exynos3250-artik5-devel.dts @@ -21,6 +21,22 @@ "samsung,exynos3250", "samsung,exynos3"; }; +&mshc_2 { + num-slots = <1>; + cap-sd-highspeed; + disable-wp; + card-detect-delay = <200>; + clock-frequency = <100000000>; + clock-freq-min-max = <400000 100000000>; + samsung,dw-mshc-ciu-div = <1>; + samsung,dw-mshc-sdr-timing = <0 1>; + samsung,dw-mshc-ddr-timing = <1 2>; + pinctrl-names = "default"; + pinctrl-0 = <&sd2_cmd &sd2_clk &sd2_cd &sd2_bus1 &sd2_bus4>; + bus-width = <4>; + status = "okay"; +}; + &serial_2 { status = "okay"; };