diff mbox

[07/10] ARM: dts: Add thermal zone and cpufreq node for exynos3250-artik5 module

Message ID 1457921056-21257-9-git-send-email-cw00.choi@samsung.com (mailing list archive)
State Superseded
Headers show

Commit Message

Chanwoo Choi March 14, 2016, 2:04 a.m. UTC
This patch enables the CPU frequency scaling for exynos3250-artik5 module
and adds the thernal zones with cpu cooling device to prevent the overheat
temperature.

Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
---
 arch/arm/boot/dts/exynos3250-artik5.dtsi | 23 +++++++++++++++++++++++
 1 file changed, 23 insertions(+)

Comments

Krzysztof Kozlowski March 14, 2016, 7:06 a.m. UTC | #1
On 14.03.2016 11:04, Chanwoo Choi wrote:
> This patch enables the CPU frequency scaling for exynos3250-artik5 module
> and adds the thernal zones with cpu cooling device to prevent the overheat
> temperature.
> 
> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
> ---
>  arch/arm/boot/dts/exynos3250-artik5.dtsi | 23 +++++++++++++++++++++++
>  1 file changed, 23 insertions(+)

The patch looks good but just squash it with 5/10 unless there is some
benefit by splitting the features for many patches. The benefit would be
for example submitting the work partially, in steps, following principle
release-early-release-often... but this is not the case. You have
everything ready and tested.

BR,
Krzysztof

> 
> diff --git a/arch/arm/boot/dts/exynos3250-artik5.dtsi b/arch/arm/boot/dts/exynos3250-artik5.dtsi
> index 75b291c10cdc..877e4827df83 100644
> --- a/arch/arm/boot/dts/exynos3250-artik5.dtsi
> +++ b/arch/arm/boot/dts/exynos3250-artik5.dtsi
> @@ -31,6 +31,25 @@
>  		compatible = "samsung,secure-firmware";
>  		reg = <0x0205F000 0x1000>;
>  	};
> +
> +	thermal-zones {
> +		cpu_thermal: cpu-thermal {
> +			cooling-maps {
> +				map0 {
> +					/* Corresponds to 500MHz */
> +					cooling-device = <&cpu0 5 5>;
> +				};
> +				map1 {
> +					/* Corresponds to 200MHz */
> +					cooling-device = <&cpu0 8 8>;
> +				};
> +			};
> +		};
> +	};
> +};
> +
> +&cpu0 {
> +	cpu0-supply = <&buck2_reg>;
>  };
>  
>  &i2c_0 {
> @@ -296,6 +315,10 @@
>  	status = "okay";
>  };
>  
> +&tmu {
> +	status = "okay";
> +};
> +
>  &xusbxti {
>  	clock-frequency = <24000000>;
>  };
> 

--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Chanwoo Choi March 14, 2016, 7:13 a.m. UTC | #2
On 2016? 03? 14? 16:06, Krzysztof Kozlowski wrote:
> On 14.03.2016 11:04, Chanwoo Choi wrote:
>> This patch enables the CPU frequency scaling for exynos3250-artik5 module
>> and adds the thernal zones with cpu cooling device to prevent the overheat
>> temperature.
>>
>> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
>> ---
>>  arch/arm/boot/dts/exynos3250-artik5.dtsi | 23 +++++++++++++++++++++++
>>  1 file changed, 23 insertions(+)
> 
> The patch looks good but just squash it with 5/10 unless there is some
> benefit by splitting the features for many patches. The benefit would be
> for example submitting the work partially, in steps, following principle
> release-early-release-often... but this is not the case. You have
> everything ready and tested.

OK. I'll merge this patch with 5/10 patch.

Best Regards,
Chanwoo Choi

> 
> BR,
> Krzysztof
> 
>>
>> diff --git a/arch/arm/boot/dts/exynos3250-artik5.dtsi b/arch/arm/boot/dts/exynos3250-artik5.dtsi
>> index 75b291c10cdc..877e4827df83 100644
>> --- a/arch/arm/boot/dts/exynos3250-artik5.dtsi
>> +++ b/arch/arm/boot/dts/exynos3250-artik5.dtsi
>> @@ -31,6 +31,25 @@
>>  		compatible = "samsung,secure-firmware";
>>  		reg = <0x0205F000 0x1000>;
>>  	};
>> +
>> +	thermal-zones {
>> +		cpu_thermal: cpu-thermal {
>> +			cooling-maps {
>> +				map0 {
>> +					/* Corresponds to 500MHz */
>> +					cooling-device = <&cpu0 5 5>;
>> +				};
>> +				map1 {
>> +					/* Corresponds to 200MHz */
>> +					cooling-device = <&cpu0 8 8>;
>> +				};
>> +			};
>> +		};
>> +	};
>> +};
>> +
>> +&cpu0 {
>> +	cpu0-supply = <&buck2_reg>;
>>  };
>>  
>>  &i2c_0 {
>> @@ -296,6 +315,10 @@
>>  	status = "okay";
>>  };
>>  
>> +&tmu {
>> +	status = "okay";
>> +};
>> +
>>  &xusbxti {
>>  	clock-frequency = <24000000>;
>>  };
>>
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 
> 

--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/arch/arm/boot/dts/exynos3250-artik5.dtsi b/arch/arm/boot/dts/exynos3250-artik5.dtsi
index 75b291c10cdc..877e4827df83 100644
--- a/arch/arm/boot/dts/exynos3250-artik5.dtsi
+++ b/arch/arm/boot/dts/exynos3250-artik5.dtsi
@@ -31,6 +31,25 @@ 
 		compatible = "samsung,secure-firmware";
 		reg = <0x0205F000 0x1000>;
 	};
+
+	thermal-zones {
+		cpu_thermal: cpu-thermal {
+			cooling-maps {
+				map0 {
+					/* Corresponds to 500MHz */
+					cooling-device = <&cpu0 5 5>;
+				};
+				map1 {
+					/* Corresponds to 200MHz */
+					cooling-device = <&cpu0 8 8>;
+				};
+			};
+		};
+	};
+};
+
+&cpu0 {
+	cpu0-supply = <&buck2_reg>;
 };
 
 &i2c_0 {
@@ -296,6 +315,10 @@ 
 	status = "okay";
 };
 
+&tmu {
+	status = "okay";
+};
+
 &xusbxti {
 	clock-frequency = <24000000>;
 };