diff mbox

[PATCHv14,02/18] dts: exynos4: add node for the HDMI CEC device

Message ID 1458911416-47981-3-git-send-email-hverkuil@xs4all.nl (mailing list archive)
State Accepted
Headers show

Commit Message

Hans Verkuil March 25, 2016, 1:10 p.m. UTC
From: Kamil Debski <kamil@wypas.org>

This patch adds HDMI CEC node specific to the Exynos4210/4x12 SoC series.

Signed-off-by: Kamil Debski <kamil@wypas.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
---
 arch/arm/boot/dts/exynos4.dtsi | 12 ++++++++++++
 1 file changed, 12 insertions(+)

Comments

Krzysztof Kozlowski March 29, 2016, 6:27 a.m. UTC | #1
On Fri, Mar 25, 2016 at 10:10 PM, Hans Verkuil <hverkuil@xs4all.nl> wrote:
> From: Kamil Debski <kamil@wypas.org>
>
> This patch adds HDMI CEC node specific to the Exynos4210/4x12 SoC series.
>
> Signed-off-by: Kamil Debski <kamil@wypas.org>
> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
> Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
> ---
>  arch/arm/boot/dts/exynos4.dtsi | 12 ++++++++++++
>  1 file changed, 12 insertions(+)

Applied for v4.7 with a little bit different subject.

Best regards,
Krzysztof
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi
index 045785c..8913408 100644
--- a/arch/arm/boot/dts/exynos4.dtsi
+++ b/arch/arm/boot/dts/exynos4.dtsi
@@ -751,6 +751,18 @@ 
 		status = "disabled";
 	};
 
+	hdmicec: cec@100B0000 {
+		compatible = "samsung,s5p-cec";
+		reg = <0x100B0000 0x200>;
+		interrupts = <0 114 0>;
+		clocks = <&clock CLK_HDMI_CEC>;
+		clock-names = "hdmicec";
+		samsung,syscon-phandle = <&pmu_system_controller>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&hdmi_cec>;
+		status = "disabled";
+	};
+
 	mixer: mixer@12C10000 {
 		compatible = "samsung,exynos4210-mixer";
 		interrupts = <0 91 0>;