[v5,29/46] regulator: pwm: properly initialize the ->state field

Commit Message

Boris BREZILLON March 30, 2016, 8:03 p.m. UTC

The ->state field is currently initialized to 0, thus referencing the
voltage selector at index 0, which might not reflect the current voltage
value.
If possible, retrieve the current voltage selector from the PWM state, else
return -EINVAL.

Signed-off-by: Boris Brezillon <[e-mail]>
Tested-by: Heiko Stuebner <[e-mail]>
Acked-by: Mark Brown <[e-mail]>
---
 drivers/regulator/pwm-regulator.c | 26 ++++++++++++++++++++++++++
 1 file changed, 26 insertions(+)

Patch

diff --git a/drivers/regulator/pwm-regulator.c b/drivers/regulator/pwm-regulator.c
index 42cc312..9374796 100644
--- a/drivers/regulator/pwm-regulator.c
+++ b/drivers/regulator/pwm-regulator.c
@@ -48,10 +48,35 @@  struct pwm_voltages {
 /**
  * Voltage table call-backs
  */
+static void pwm_regulator_init_state(struct regulator_dev *rdev)
+{
+	struct pwm_regulator_data *drvdata = rdev_get_drvdata(rdev);
+	struct pwm_state pwm_state;
+	unsigned int dutycycle;
+	int i;
+
+	pwm_get_state(drvdata->pwm, &pwm_state);
+
+	if (!pwm_state.period)
+		return;
+
+	dutycycle = (pwm_state.duty_cycle * 100) / pwm_state.period;
+
+	for (i = 0; i < rdev->desc->n_voltages; i++) {
+		if (dutycycle == drvdata->duty_cycle_table[i].dutycycle) {
+			drvdata->state = i;
+			return;
+		}
+	}
+}
+
 static int pwm_regulator_get_voltage_sel(struct regulator_dev *rdev)
 {
 	struct pwm_regulator_data *drvdata = rdev_get_drvdata(rdev);
 
+	if (drvdata->state < 0)
+		pwm_regulator_init_state(rdev);
+
 	return drvdata->state;
 }
 
@@ -234,6 +259,7 @@  static int pwm_regulator_init_table(struct platform_device *pdev,
 		return ret;
 	}
 
+	drvdata->state			= -EINVAL;
 	drvdata->duty_cycle_table	= duty_cycle_table;
 	memcpy(&drvdata->ops, &pwm_regulator_voltage_table_ops,
 	       sizeof(drvdata->ops));