@@ -90,28 +90,6 @@ config ARM_EXYNOS_BUS_DEVFREQ
and adjusts the operating frequencies and voltages with OPP support.
This does not yet operate with optimal voltages.
-config ARM_EXYNOS4_BUS_DEVFREQ
- bool "ARM Exynos4210/4212/4412 Memory Bus DEVFREQ Driver"
- depends on (CPU_EXYNOS4210 || SOC_EXYNOS4212 || SOC_EXYNOS4412) && !ARCH_MULTIPLATFORM
- select DEVFREQ_GOV_SIMPLE_ONDEMAND
- select PM_OPP
- help
- This adds the DEVFREQ driver for Exynos4210 memory bus (vdd_int)
- and Exynos4212/4412 memory interface and bus (vdd_mif + vdd_int).
- It reads PPMU counters of memory controllers and adjusts
- the operating frequencies and voltages with OPP support.
- This does not yet operate with optimal voltages.
-
-config ARM_EXYNOS5_BUS_DEVFREQ
- tristate "ARM Exynos5250 Bus DEVFREQ Driver"
- depends on SOC_EXYNOS5250
- select DEVFREQ_GOV_SIMPLE_ONDEMAND
- select PM_OPP
- help
- This adds the DEVFREQ driver for Exynos5250 bus interface (vdd_int).
- It reads PPMU counters of memory controllers and adjusts the
- operating frequencies and voltages with OPP support.
-
config ARM_TEGRA_DEVFREQ
tristate "Tegra DEVFREQ Driver"
depends on ARCH_TEGRA_124_SOC
@@ -8,8 +8,6 @@ obj-$(CONFIG_DEVFREQ_GOV_PASSIVE) += governor_passive.o
# DEVFREQ Drivers
obj-$(CONFIG_ARM_EXYNOS_BUS_DEVFREQ) += exynos-bus.o
-obj-$(CONFIG_ARM_EXYNOS4_BUS_DEVFREQ) += exynos/
-obj-$(CONFIG_ARM_EXYNOS5_BUS_DEVFREQ) += exynos/
obj-$(CONFIG_ARM_TEGRA_DEVFREQ) += tegra-devfreq.o
# DEVFREQ Event Drivers
deleted file mode 100644
@@ -1,3 +0,0 @@
-# Exynos DEVFREQ Drivers
-obj-$(CONFIG_ARM_EXYNOS4_BUS_DEVFREQ) += exynos_ppmu.o exynos4_bus.o
-obj-$(CONFIG_ARM_EXYNOS5_BUS_DEVFREQ) += exynos_ppmu.o exynos5_bus.o
deleted file mode 100644
@@ -1,1055 +0,0 @@
-/* drivers/devfreq/exynos4210_memorybus.c
- *
- * Copyright (c) 2011 Samsung Electronics Co., Ltd.
- * http://www.samsung.com/
- * MyungJoo Ham <myungjoo.ham@samsung.com>
- *
- * EXYNOS4 - Memory/Bus clock frequency scaling support in DEVFREQ framework
- * This version supports EXYNOS4210 only. This changes bus frequencies
- * and vddint voltages. Exynos4412/4212 should be able to be supported
- * with minor modifications.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/io.h>
-#include <linux/slab.h>
-#include <linux/mutex.h>
-#include <linux/suspend.h>
-#include <linux/pm_opp.h>
-#include <linux/devfreq.h>
-#include <linux/platform_device.h>
-#include <linux/regulator/consumer.h>
-#include <linux/module.h>
-
-#include <mach/map.h>
-
-#include "exynos_ppmu.h"
-#include "exynos4_bus.h"
-
-#define MAX_SAFEVOLT 1200000 /* 1.2V */
-
-enum exynos4_busf_type {
- TYPE_BUSF_EXYNOS4210,
- TYPE_BUSF_EXYNOS4x12,
-};
-
-/* Assume that the bus is saturated if the utilization is 40% */
-#define BUS_SATURATION_RATIO 40
-
-enum busclk_level_idx {
- LV_0 = 0,
- LV_1,
- LV_2,
- LV_3,
- LV_4,
- _LV_END
-};
-
-enum exynos_ppmu_idx {
- PPMU_DMC0,
- PPMU_DMC1,
- PPMU_END,
-};
-
-#define EX4210_LV_MAX LV_2
-#define EX4x12_LV_MAX LV_4
-#define EX4210_LV_NUM (LV_2 + 1)
-#define EX4x12_LV_NUM (LV_4 + 1)
-
-/**
- * struct busfreq_opp_info - opp information for bus
- * @rate: Frequency in hertz
- * @volt: Voltage in microvolts corresponding to this OPP
- */
-struct busfreq_opp_info {
- unsigned long rate;
- unsigned long volt;
-};
-
-struct busfreq_data {
- enum exynos4_busf_type type;
- struct device *dev;
- struct devfreq *devfreq;
- bool disabled;
- struct regulator *vdd_int;
- struct regulator *vdd_mif; /* Exynos4412/4212 only */
- struct busfreq_opp_info curr_oppinfo;
- struct busfreq_ppmu_data ppmu_data;
-
- struct notifier_block pm_notifier;
- struct mutex lock;
-
- /* Dividers calculated at boot/probe-time */
- unsigned int dmc_divtable[_LV_END]; /* DMC0 */
- unsigned int top_divtable[_LV_END];
-};
-
-/* 4210 controls clock of mif and voltage of int */
-static struct bus_opp_table exynos4210_busclk_table[] = {
- {LV_0, 400000, 1150000},
- {LV_1, 267000, 1050000},
- {LV_2, 133000, 1025000},
- {0, 0, 0},
-};
-
-/*
- * MIF is the main control knob clock for Exynos4x12 MIF/INT
- * clock and voltage of both mif/int are controlled.
- */
-static struct bus_opp_table exynos4x12_mifclk_table[] = {
- {LV_0, 400000, 1100000},
- {LV_1, 267000, 1000000},
- {LV_2, 160000, 950000},
- {LV_3, 133000, 950000},
- {LV_4, 100000, 950000},
- {0, 0, 0},
-};
-
-/*
- * INT is not the control knob of 4x12. LV_x is not meant to represent
- * the current performance. (MIF does)
- */
-static struct bus_opp_table exynos4x12_intclk_table[] = {
- {LV_0, 200000, 1000000},
- {LV_1, 160000, 950000},
- {LV_2, 133000, 925000},
- {LV_3, 100000, 900000},
- {0, 0, 0},
-};
-
-/* TODO: asv volt definitions are "__initdata"? */
-/* Some chips have different operating voltages */
-static unsigned int exynos4210_asv_volt[][EX4210_LV_NUM] = {
- {1150000, 1050000, 1050000},
- {1125000, 1025000, 1025000},
- {1100000, 1000000, 1000000},
- {1075000, 975000, 975000},
- {1050000, 950000, 950000},
-};
-
-static unsigned int exynos4x12_mif_step_50[][EX4x12_LV_NUM] = {
- /* 400 267 160 133 100 */
- {1050000, 950000, 900000, 900000, 900000}, /* ASV0 */
- {1050000, 950000, 900000, 900000, 900000}, /* ASV1 */
- {1050000, 950000, 900000, 900000, 900000}, /* ASV2 */
- {1050000, 900000, 900000, 900000, 900000}, /* ASV3 */
- {1050000, 900000, 900000, 900000, 850000}, /* ASV4 */
- {1050000, 900000, 900000, 850000, 850000}, /* ASV5 */
- {1050000, 900000, 850000, 850000, 850000}, /* ASV6 */
- {1050000, 900000, 850000, 850000, 850000}, /* ASV7 */
- {1050000, 900000, 850000, 850000, 850000}, /* ASV8 */
-};
-
-static unsigned int exynos4x12_int_volt[][EX4x12_LV_NUM] = {
- /* 200 160 133 100 */
- {1000000, 950000, 925000, 900000}, /* ASV0 */
- {975000, 925000, 925000, 900000}, /* ASV1 */
- {950000, 925000, 900000, 875000}, /* ASV2 */
- {950000, 900000, 900000, 875000}, /* ASV3 */
- {925000, 875000, 875000, 875000}, /* ASV4 */
- {900000, 850000, 850000, 850000}, /* ASV5 */
- {900000, 850000, 850000, 850000}, /* ASV6 */
- {900000, 850000, 850000, 850000}, /* ASV7 */
- {900000, 850000, 850000, 850000}, /* ASV8 */
-};
-
-/*** Clock Divider Data for Exynos4210 ***/
-static unsigned int exynos4210_clkdiv_dmc0[][8] = {
- /*
- * Clock divider value for following
- * { DIVACP, DIVACP_PCLK, DIVDPHY, DIVDMC, DIVDMCD
- * DIVDMCP, DIVCOPY2, DIVCORE_TIMERS }
- */
-
- /* DMC L0: 400MHz */
- { 3, 1, 1, 1, 1, 1, 3, 1 },
- /* DMC L1: 266.7MHz */
- { 4, 1, 1, 2, 1, 1, 3, 1 },
- /* DMC L2: 133MHz */
- { 5, 1, 1, 5, 1, 1, 3, 1 },
-};
-static unsigned int exynos4210_clkdiv_top[][5] = {
- /*
- * Clock divider value for following
- * { DIVACLK200, DIVACLK100, DIVACLK160, DIVACLK133, DIVONENAND }
- */
- /* ACLK200 L0: 200MHz */
- { 3, 7, 4, 5, 1 },
- /* ACLK200 L1: 160MHz */
- { 4, 7, 5, 6, 1 },
- /* ACLK200 L2: 133MHz */
- { 5, 7, 7, 7, 1 },
-};
-static unsigned int exynos4210_clkdiv_lr_bus[][2] = {
- /*
- * Clock divider value for following
- * { DIVGDL/R, DIVGPL/R }
- */
- /* ACLK_GDL/R L1: 200MHz */
- { 3, 1 },
- /* ACLK_GDL/R L2: 160MHz */
- { 4, 1 },
- /* ACLK_GDL/R L3: 133MHz */
- { 5, 1 },
-};
-
-/*** Clock Divider Data for Exynos4212/4412 ***/
-static unsigned int exynos4x12_clkdiv_dmc0[][6] = {
- /*
- * Clock divider value for following
- * { DIVACP, DIVACP_PCLK, DIVDPHY, DIVDMC, DIVDMCD
- * DIVDMCP}
- */
-
- /* DMC L0: 400MHz */
- {3, 1, 1, 1, 1, 1},
- /* DMC L1: 266.7MHz */
- {4, 1, 1, 2, 1, 1},
- /* DMC L2: 160MHz */
- {5, 1, 1, 4, 1, 1},
- /* DMC L3: 133MHz */
- {5, 1, 1, 5, 1, 1},
- /* DMC L4: 100MHz */
- {7, 1, 1, 7, 1, 1},
-};
-static unsigned int exynos4x12_clkdiv_dmc1[][6] = {
- /*
- * Clock divider value for following
- * { G2DACP, DIVC2C, DIVC2C_ACLK }
- */
-
- /* DMC L0: 400MHz */
- {3, 1, 1},
- /* DMC L1: 266.7MHz */
- {4, 2, 1},
- /* DMC L2: 160MHz */
- {5, 4, 1},
- /* DMC L3: 133MHz */
- {5, 5, 1},
- /* DMC L4: 100MHz */
- {7, 7, 1},
-};
-static unsigned int exynos4x12_clkdiv_top[][5] = {
- /*
- * Clock divider value for following
- * { DIVACLK266_GPS, DIVACLK100, DIVACLK160,
- DIVACLK133, DIVONENAND }
- */
-
- /* ACLK_GDL/R L0: 200MHz */
- {2, 7, 4, 5, 1},
- /* ACLK_GDL/R L1: 200MHz */
- {2, 7, 4, 5, 1},
- /* ACLK_GDL/R L2: 160MHz */
- {4, 7, 5, 7, 1},
- /* ACLK_GDL/R L3: 133MHz */
- {4, 7, 5, 7, 1},
- /* ACLK_GDL/R L4: 100MHz */
- {7, 7, 7, 7, 1},
-};
-static unsigned int exynos4x12_clkdiv_lr_bus[][2] = {
- /*
- * Clock divider value for following
- * { DIVGDL/R, DIVGPL/R }
- */
-
- /* ACLK_GDL/R L0: 200MHz */
- {3, 1},
- /* ACLK_GDL/R L1: 200MHz */
- {3, 1},
- /* ACLK_GDL/R L2: 160MHz */
- {4, 1},
- /* ACLK_GDL/R L3: 133MHz */
- {5, 1},
- /* ACLK_GDL/R L4: 100MHz */
- {7, 1},
-};
-static unsigned int exynos4x12_clkdiv_sclkip[][3] = {
- /*
- * Clock divider value for following
- * { DIVMFC, DIVJPEG, DIVFIMC0~3}
- */
-
- /* SCLK_MFC: 200MHz */
- {3, 3, 4},
- /* SCLK_MFC: 200MHz */
- {3, 3, 4},
- /* SCLK_MFC: 160MHz */
- {4, 4, 5},
- /* SCLK_MFC: 133MHz */
- {5, 5, 5},
- /* SCLK_MFC: 100MHz */
- {7, 7, 7},
-};
-
-
-static int exynos4210_set_busclk(struct busfreq_data *data,
- struct busfreq_opp_info *oppi)
-{
- unsigned int index;
- unsigned int tmp;
-
- for (index = LV_0; index < EX4210_LV_NUM; index++)
- if (oppi->rate == exynos4210_busclk_table[index].clk)
- break;
-
- if (index == EX4210_LV_NUM)
- return -EINVAL;
-
- /* Change Divider - DMC0 */
- tmp = data->dmc_divtable[index];
-
- __raw_writel(tmp, EXYNOS4_CLKDIV_DMC0);
-
- do {
- tmp = __raw_readl(EXYNOS4_CLKDIV_STAT_DMC0);
- } while (tmp & 0x11111111);
-
- /* Change Divider - TOP */
- tmp = data->top_divtable[index];
-
- __raw_writel(tmp, EXYNOS4_CLKDIV_TOP);
-
- do {
- tmp = __raw_readl(EXYNOS4_CLKDIV_STAT_TOP);
- } while (tmp & 0x11111);
-
- /* Change Divider - LEFTBUS */
- tmp = __raw_readl(EXYNOS4_CLKDIV_LEFTBUS);
-
- tmp &= ~(EXYNOS4_CLKDIV_BUS_GDLR_MASK | EXYNOS4_CLKDIV_BUS_GPLR_MASK);
-
- tmp |= ((exynos4210_clkdiv_lr_bus[index][0] <<
- EXYNOS4_CLKDIV_BUS_GDLR_SHIFT) |
- (exynos4210_clkdiv_lr_bus[index][1] <<
- EXYNOS4_CLKDIV_BUS_GPLR_SHIFT));
-
- __raw_writel(tmp, EXYNOS4_CLKDIV_LEFTBUS);
-
- do {
- tmp = __raw_readl(EXYNOS4_CLKDIV_STAT_LEFTBUS);
- } while (tmp & 0x11);
-
- /* Change Divider - RIGHTBUS */
- tmp = __raw_readl(EXYNOS4_CLKDIV_RIGHTBUS);
-
- tmp &= ~(EXYNOS4_CLKDIV_BUS_GDLR_MASK | EXYNOS4_CLKDIV_BUS_GPLR_MASK);
-
- tmp |= ((exynos4210_clkdiv_lr_bus[index][0] <<
- EXYNOS4_CLKDIV_BUS_GDLR_SHIFT) |
- (exynos4210_clkdiv_lr_bus[index][1] <<
- EXYNOS4_CLKDIV_BUS_GPLR_SHIFT));
-
- __raw_writel(tmp, EXYNOS4_CLKDIV_RIGHTBUS);
-
- do {
- tmp = __raw_readl(EXYNOS4_CLKDIV_STAT_RIGHTBUS);
- } while (tmp & 0x11);
-
- return 0;
-}
-
-static int exynos4x12_set_busclk(struct busfreq_data *data,
- struct busfreq_opp_info *oppi)
-{
- unsigned int index;
- unsigned int tmp;
-
- for (index = LV_0; index < EX4x12_LV_NUM; index++)
- if (oppi->rate == exynos4x12_mifclk_table[index].clk)
- break;
-
- if (index == EX4x12_LV_NUM)
- return -EINVAL;
-
- /* Change Divider - DMC0 */
- tmp = data->dmc_divtable[index];
-
- __raw_writel(tmp, EXYNOS4_CLKDIV_DMC0);
-
- do {
- tmp = __raw_readl(EXYNOS4_CLKDIV_STAT_DMC0);
- } while (tmp & 0x11111111);
-
- /* Change Divider - DMC1 */
- tmp = __raw_readl(EXYNOS4_CLKDIV_DMC1);
-
- tmp &= ~(EXYNOS4_CLKDIV_DMC1_G2D_ACP_MASK |
- EXYNOS4_CLKDIV_DMC1_C2C_MASK |
- EXYNOS4_CLKDIV_DMC1_C2CACLK_MASK);
-
- tmp |= ((exynos4x12_clkdiv_dmc1[index][0] <<
- EXYNOS4_CLKDIV_DMC1_G2D_ACP_SHIFT) |
- (exynos4x12_clkdiv_dmc1[index][1] <<
- EXYNOS4_CLKDIV_DMC1_C2C_SHIFT) |
- (exynos4x12_clkdiv_dmc1[index][2] <<
- EXYNOS4_CLKDIV_DMC1_C2CACLK_SHIFT));
-
- __raw_writel(tmp, EXYNOS4_CLKDIV_DMC1);
-
- do {
- tmp = __raw_readl(EXYNOS4_CLKDIV_STAT_DMC1);
- } while (tmp & 0x111111);
-
- /* Change Divider - TOP */
- tmp = __raw_readl(EXYNOS4_CLKDIV_TOP);
-
- tmp &= ~(EXYNOS4_CLKDIV_TOP_ACLK266_GPS_MASK |
- EXYNOS4_CLKDIV_TOP_ACLK100_MASK |
- EXYNOS4_CLKDIV_TOP_ACLK160_MASK |
- EXYNOS4_CLKDIV_TOP_ACLK133_MASK |
- EXYNOS4_CLKDIV_TOP_ONENAND_MASK);
-
- tmp |= ((exynos4x12_clkdiv_top[index][0] <<
- EXYNOS4_CLKDIV_TOP_ACLK266_GPS_SHIFT) |
- (exynos4x12_clkdiv_top[index][1] <<
- EXYNOS4_CLKDIV_TOP_ACLK100_SHIFT) |
- (exynos4x12_clkdiv_top[index][2] <<
- EXYNOS4_CLKDIV_TOP_ACLK160_SHIFT) |
- (exynos4x12_clkdiv_top[index][3] <<
- EXYNOS4_CLKDIV_TOP_ACLK133_SHIFT) |
- (exynos4x12_clkdiv_top[index][4] <<
- EXYNOS4_CLKDIV_TOP_ONENAND_SHIFT));
-
- __raw_writel(tmp, EXYNOS4_CLKDIV_TOP);
-
- do {
- tmp = __raw_readl(EXYNOS4_CLKDIV_STAT_TOP);
- } while (tmp & 0x11111);
-
- /* Change Divider - LEFTBUS */
- tmp = __raw_readl(EXYNOS4_CLKDIV_LEFTBUS);
-
- tmp &= ~(EXYNOS4_CLKDIV_BUS_GDLR_MASK | EXYNOS4_CLKDIV_BUS_GPLR_MASK);
-
- tmp |= ((exynos4x12_clkdiv_lr_bus[index][0] <<
- EXYNOS4_CLKDIV_BUS_GDLR_SHIFT) |
- (exynos4x12_clkdiv_lr_bus[index][1] <<
- EXYNOS4_CLKDIV_BUS_GPLR_SHIFT));
-
- __raw_writel(tmp, EXYNOS4_CLKDIV_LEFTBUS);
-
- do {
- tmp = __raw_readl(EXYNOS4_CLKDIV_STAT_LEFTBUS);
- } while (tmp & 0x11);
-
- /* Change Divider - RIGHTBUS */
- tmp = __raw_readl(EXYNOS4_CLKDIV_RIGHTBUS);
-
- tmp &= ~(EXYNOS4_CLKDIV_BUS_GDLR_MASK | EXYNOS4_CLKDIV_BUS_GPLR_MASK);
-
- tmp |= ((exynos4x12_clkdiv_lr_bus[index][0] <<
- EXYNOS4_CLKDIV_BUS_GDLR_SHIFT) |
- (exynos4x12_clkdiv_lr_bus[index][1] <<
- EXYNOS4_CLKDIV_BUS_GPLR_SHIFT));
-
- __raw_writel(tmp, EXYNOS4_CLKDIV_RIGHTBUS);
-
- do {
- tmp = __raw_readl(EXYNOS4_CLKDIV_STAT_RIGHTBUS);
- } while (tmp & 0x11);
-
- /* Change Divider - MFC */
- tmp = __raw_readl(EXYNOS4_CLKDIV_MFC);
-
- tmp &= ~(EXYNOS4_CLKDIV_MFC_MASK);
-
- tmp |= ((exynos4x12_clkdiv_sclkip[index][0] <<
- EXYNOS4_CLKDIV_MFC_SHIFT));
-
- __raw_writel(tmp, EXYNOS4_CLKDIV_MFC);
-
- do {
- tmp = __raw_readl(EXYNOS4_CLKDIV_STAT_MFC);
- } while (tmp & 0x1);
-
- /* Change Divider - JPEG */
- tmp = __raw_readl(EXYNOS4_CLKDIV_CAM1);
-
- tmp &= ~(EXYNOS4_CLKDIV_CAM1_JPEG_MASK);
-
- tmp |= ((exynos4x12_clkdiv_sclkip[index][1] <<
- EXYNOS4_CLKDIV_CAM1_JPEG_SHIFT));
-
- __raw_writel(tmp, EXYNOS4_CLKDIV_CAM1);
-
- do {
- tmp = __raw_readl(EXYNOS4_CLKDIV_STAT_CAM1);
- } while (tmp & 0x1);
-
- /* Change Divider - FIMC0~3 */
- tmp = __raw_readl(EXYNOS4_CLKDIV_CAM);
-
- tmp &= ~(EXYNOS4_CLKDIV_CAM_FIMC0_MASK | EXYNOS4_CLKDIV_CAM_FIMC1_MASK |
- EXYNOS4_CLKDIV_CAM_FIMC2_MASK | EXYNOS4_CLKDIV_CAM_FIMC3_MASK);
-
- tmp |= ((exynos4x12_clkdiv_sclkip[index][2] <<
- EXYNOS4_CLKDIV_CAM_FIMC0_SHIFT) |
- (exynos4x12_clkdiv_sclkip[index][2] <<
- EXYNOS4_CLKDIV_CAM_FIMC1_SHIFT) |
- (exynos4x12_clkdiv_sclkip[index][2] <<
- EXYNOS4_CLKDIV_CAM_FIMC2_SHIFT) |
- (exynos4x12_clkdiv_sclkip[index][2] <<
- EXYNOS4_CLKDIV_CAM_FIMC3_SHIFT));
-
- __raw_writel(tmp, EXYNOS4_CLKDIV_CAM);
-
- do {
- tmp = __raw_readl(EXYNOS4_CLKDIV_STAT_CAM1);
- } while (tmp & 0x1111);
-
- return 0;
-}
-
-static int exynos4x12_get_intspec(unsigned long mifclk)
-{
- int i = 0;
-
- while (exynos4x12_intclk_table[i].clk) {
- if (exynos4x12_intclk_table[i].clk <= mifclk)
- return i;
- i++;
- }
-
- return -EINVAL;
-}
-
-static int exynos4_bus_setvolt(struct busfreq_data *data,
- struct busfreq_opp_info *oppi,
- struct busfreq_opp_info *oldoppi)
-{
- int err = 0, tmp;
- unsigned long volt = oppi->volt;
-
- switch (data->type) {
- case TYPE_BUSF_EXYNOS4210:
- /* OPP represents DMC clock + INT voltage */
- err = regulator_set_voltage(data->vdd_int, volt,
- MAX_SAFEVOLT);
- break;
- case TYPE_BUSF_EXYNOS4x12:
- /* OPP represents MIF clock + MIF voltage */
- err = regulator_set_voltage(data->vdd_mif, volt,
- MAX_SAFEVOLT);
- if (err)
- break;
-
- tmp = exynos4x12_get_intspec(oppi->rate);
- if (tmp < 0) {
- err = tmp;
- regulator_set_voltage(data->vdd_mif,
- oldoppi->volt,
- MAX_SAFEVOLT);
- break;
- }
- err = regulator_set_voltage(data->vdd_int,
- exynos4x12_intclk_table[tmp].volt,
- MAX_SAFEVOLT);
- /* Try to recover */
- if (err)
- regulator_set_voltage(data->vdd_mif,
- oldoppi->volt,
- MAX_SAFEVOLT);
- break;
- default:
- err = -EINVAL;
- }
-
- return err;
-}
-
-static int exynos4_bus_target(struct device *dev, unsigned long *_freq,
- u32 flags)
-{
- int err = 0;
- struct platform_device *pdev = container_of(dev, struct platform_device,
- dev);
- struct busfreq_data *data = platform_get_drvdata(pdev);
- struct dev_pm_opp *opp;
- unsigned long freq;
- unsigned long old_freq = data->curr_oppinfo.rate;
- struct busfreq_opp_info new_oppinfo;
-
- rcu_read_lock();
- opp = devfreq_recommended_opp(dev, _freq, flags);
- if (IS_ERR(opp)) {
- rcu_read_unlock();
- return PTR_ERR(opp);
- }
- new_oppinfo.rate = dev_pm_opp_get_freq(opp);
- new_oppinfo.volt = dev_pm_opp_get_voltage(opp);
- rcu_read_unlock();
- freq = new_oppinfo.rate;
-
- if (old_freq == freq)
- return 0;
-
- dev_dbg(dev, "targeting %lukHz %luuV\n", freq, new_oppinfo.volt);
-
- mutex_lock(&data->lock);
-
- if (data->disabled)
- goto out;
-
- if (old_freq < freq)
- err = exynos4_bus_setvolt(data, &new_oppinfo,
- &data->curr_oppinfo);
- if (err)
- goto out;
-
- if (old_freq != freq) {
- switch (data->type) {
- case TYPE_BUSF_EXYNOS4210:
- err = exynos4210_set_busclk(data, &new_oppinfo);
- break;
- case TYPE_BUSF_EXYNOS4x12:
- err = exynos4x12_set_busclk(data, &new_oppinfo);
- break;
- default:
- err = -EINVAL;
- }
- }
- if (err)
- goto out;
-
- if (old_freq > freq)
- err = exynos4_bus_setvolt(data, &new_oppinfo,
- &data->curr_oppinfo);
- if (err)
- goto out;
-
- data->curr_oppinfo = new_oppinfo;
-out:
- mutex_unlock(&data->lock);
- return err;
-}
-
-static int exynos4_bus_get_dev_status(struct device *dev,
- struct devfreq_dev_status *stat)
-{
- struct busfreq_data *data = dev_get_drvdata(dev);
- struct busfreq_ppmu_data *ppmu_data = &data->ppmu_data;
- int busier;
-
- exynos_read_ppmu(ppmu_data);
- busier = exynos_get_busier_ppmu(ppmu_data);
- stat->current_frequency = data->curr_oppinfo.rate;
-
- /* Number of cycles spent on memory access */
- stat->busy_time = ppmu_data->ppmu[busier].count[PPMU_PMNCNT3];
- stat->busy_time *= 100 / BUS_SATURATION_RATIO;
- stat->total_time = ppmu_data->ppmu[busier].ccnt;
-
- /* If the counters have overflown, retry */
- if (ppmu_data->ppmu[busier].ccnt_overflow ||
- ppmu_data->ppmu[busier].count_overflow[0])
- return -EAGAIN;
-
- return 0;
-}
-
-static struct devfreq_dev_profile exynos4_devfreq_profile = {
- .initial_freq = 400000,
- .polling_ms = 50,
- .target = exynos4_bus_target,
- .get_dev_status = exynos4_bus_get_dev_status,
-};
-
-static int exynos4210_init_tables(struct busfreq_data *data)
-{
- u32 tmp;
- int mgrp;
- int i, err = 0;
-
- tmp = __raw_readl(EXYNOS4_CLKDIV_DMC0);
- for (i = LV_0; i < EX4210_LV_NUM; i++) {
- tmp &= ~(EXYNOS4_CLKDIV_DMC0_ACP_MASK |
- EXYNOS4_CLKDIV_DMC0_ACPPCLK_MASK |
- EXYNOS4_CLKDIV_DMC0_DPHY_MASK |
- EXYNOS4_CLKDIV_DMC0_DMC_MASK |
- EXYNOS4_CLKDIV_DMC0_DMCD_MASK |
- EXYNOS4_CLKDIV_DMC0_DMCP_MASK |
- EXYNOS4_CLKDIV_DMC0_COPY2_MASK |
- EXYNOS4_CLKDIV_DMC0_CORETI_MASK);
-
- tmp |= ((exynos4210_clkdiv_dmc0[i][0] <<
- EXYNOS4_CLKDIV_DMC0_ACP_SHIFT) |
- (exynos4210_clkdiv_dmc0[i][1] <<
- EXYNOS4_CLKDIV_DMC0_ACPPCLK_SHIFT) |
- (exynos4210_clkdiv_dmc0[i][2] <<
- EXYNOS4_CLKDIV_DMC0_DPHY_SHIFT) |
- (exynos4210_clkdiv_dmc0[i][3] <<
- EXYNOS4_CLKDIV_DMC0_DMC_SHIFT) |
- (exynos4210_clkdiv_dmc0[i][4] <<
- EXYNOS4_CLKDIV_DMC0_DMCD_SHIFT) |
- (exynos4210_clkdiv_dmc0[i][5] <<
- EXYNOS4_CLKDIV_DMC0_DMCP_SHIFT) |
- (exynos4210_clkdiv_dmc0[i][6] <<
- EXYNOS4_CLKDIV_DMC0_COPY2_SHIFT) |
- (exynos4210_clkdiv_dmc0[i][7] <<
- EXYNOS4_CLKDIV_DMC0_CORETI_SHIFT));
-
- data->dmc_divtable[i] = tmp;
- }
-
- tmp = __raw_readl(EXYNOS4_CLKDIV_TOP);
- for (i = LV_0; i < EX4210_LV_NUM; i++) {
- tmp &= ~(EXYNOS4_CLKDIV_TOP_ACLK200_MASK |
- EXYNOS4_CLKDIV_TOP_ACLK100_MASK |
- EXYNOS4_CLKDIV_TOP_ACLK160_MASK |
- EXYNOS4_CLKDIV_TOP_ACLK133_MASK |
- EXYNOS4_CLKDIV_TOP_ONENAND_MASK);
-
- tmp |= ((exynos4210_clkdiv_top[i][0] <<
- EXYNOS4_CLKDIV_TOP_ACLK200_SHIFT) |
- (exynos4210_clkdiv_top[i][1] <<
- EXYNOS4_CLKDIV_TOP_ACLK100_SHIFT) |
- (exynos4210_clkdiv_top[i][2] <<
- EXYNOS4_CLKDIV_TOP_ACLK160_SHIFT) |
- (exynos4210_clkdiv_top[i][3] <<
- EXYNOS4_CLKDIV_TOP_ACLK133_SHIFT) |
- (exynos4210_clkdiv_top[i][4] <<
- EXYNOS4_CLKDIV_TOP_ONENAND_SHIFT));
-
- data->top_divtable[i] = tmp;
- }
-
- /*
- * TODO: init tmp based on busfreq_data
- * (device-tree or platform-data)
- */
- tmp = 0; /* Max voltages for the reliability of the unknown */
-
- pr_debug("ASV Group of Exynos4 is %d\n", tmp);
- /* Use merged grouping for voltage */
- switch (tmp) {
- case 0:
- mgrp = 0;
- break;
- case 1:
- case 2:
- mgrp = 1;
- break;
- case 3:
- case 4:
- mgrp = 2;
- break;
- case 5:
- case 6:
- mgrp = 3;
- break;
- case 7:
- mgrp = 4;
- break;
- default:
- pr_warn("Unknown ASV Group. Use max voltage.\n");
- mgrp = 0;
- }
-
- for (i = LV_0; i < EX4210_LV_NUM; i++)
- exynos4210_busclk_table[i].volt = exynos4210_asv_volt[mgrp][i];
-
- for (i = LV_0; i < EX4210_LV_NUM; i++) {
- err = dev_pm_opp_add(data->dev, exynos4210_busclk_table[i].clk,
- exynos4210_busclk_table[i].volt);
- if (err) {
- dev_err(data->dev, "Cannot add opp entries.\n");
- return err;
- }
- }
-
-
- return 0;
-}
-
-static int exynos4x12_init_tables(struct busfreq_data *data)
-{
- unsigned int i;
- unsigned int tmp;
- int ret;
-
- /* Enable pause function for DREX2 DVFS */
- tmp = __raw_readl(EXYNOS4_DMC_PAUSE_CTRL);
- tmp |= EXYNOS4_DMC_PAUSE_ENABLE;
- __raw_writel(tmp, EXYNOS4_DMC_PAUSE_CTRL);
-
- tmp = __raw_readl(EXYNOS4_CLKDIV_DMC0);
-
- for (i = 0; i < EX4x12_LV_NUM; i++) {
- tmp &= ~(EXYNOS4_CLKDIV_DMC0_ACP_MASK |
- EXYNOS4_CLKDIV_DMC0_ACPPCLK_MASK |
- EXYNOS4_CLKDIV_DMC0_DPHY_MASK |
- EXYNOS4_CLKDIV_DMC0_DMC_MASK |
- EXYNOS4_CLKDIV_DMC0_DMCD_MASK |
- EXYNOS4_CLKDIV_DMC0_DMCP_MASK);
-
- tmp |= ((exynos4x12_clkdiv_dmc0[i][0] <<
- EXYNOS4_CLKDIV_DMC0_ACP_SHIFT) |
- (exynos4x12_clkdiv_dmc0[i][1] <<
- EXYNOS4_CLKDIV_DMC0_ACPPCLK_SHIFT) |
- (exynos4x12_clkdiv_dmc0[i][2] <<
- EXYNOS4_CLKDIV_DMC0_DPHY_SHIFT) |
- (exynos4x12_clkdiv_dmc0[i][3] <<
- EXYNOS4_CLKDIV_DMC0_DMC_SHIFT) |
- (exynos4x12_clkdiv_dmc0[i][4] <<
- EXYNOS4_CLKDIV_DMC0_DMCD_SHIFT) |
- (exynos4x12_clkdiv_dmc0[i][5] <<
- EXYNOS4_CLKDIV_DMC0_DMCP_SHIFT));
-
- data->dmc_divtable[i] = tmp;
- }
-
- tmp = 0; /* Max voltages for the reliability of the unknown */
-
- if (tmp > 8)
- tmp = 0;
- pr_debug("ASV Group of Exynos4x12 is %d\n", tmp);
-
- for (i = 0; i < EX4x12_LV_NUM; i++) {
- exynos4x12_mifclk_table[i].volt =
- exynos4x12_mif_step_50[tmp][i];
- exynos4x12_intclk_table[i].volt =
- exynos4x12_int_volt[tmp][i];
- }
-
- for (i = 0; i < EX4x12_LV_NUM; i++) {
- ret = dev_pm_opp_add(data->dev, exynos4x12_mifclk_table[i].clk,
- exynos4x12_mifclk_table[i].volt);
- if (ret) {
- dev_err(data->dev, "Fail to add opp entries.\n");
- return ret;
- }
- }
-
- return 0;
-}
-
-static int exynos4_busfreq_pm_notifier_event(struct notifier_block *this,
- unsigned long event, void *ptr)
-{
- struct busfreq_data *data = container_of(this, struct busfreq_data,
- pm_notifier);
- struct dev_pm_opp *opp;
- struct busfreq_opp_info new_oppinfo;
- unsigned long maxfreq = ULONG_MAX;
- int err = 0;
-
- switch (event) {
- case PM_SUSPEND_PREPARE:
- /* Set Fastest and Deactivate DVFS */
- mutex_lock(&data->lock);
-
- data->disabled = true;
-
- rcu_read_lock();
- opp = dev_pm_opp_find_freq_floor(data->dev, &maxfreq);
- if (IS_ERR(opp)) {
- rcu_read_unlock();
- dev_err(data->dev, "%s: unable to find a min freq\n",
- __func__);
- mutex_unlock(&data->lock);
- return PTR_ERR(opp);
- }
- new_oppinfo.rate = dev_pm_opp_get_freq(opp);
- new_oppinfo.volt = dev_pm_opp_get_voltage(opp);
- rcu_read_unlock();
-
- err = exynos4_bus_setvolt(data, &new_oppinfo,
- &data->curr_oppinfo);
- if (err)
- goto unlock;
-
- switch (data->type) {
- case TYPE_BUSF_EXYNOS4210:
- err = exynos4210_set_busclk(data, &new_oppinfo);
- break;
- case TYPE_BUSF_EXYNOS4x12:
- err = exynos4x12_set_busclk(data, &new_oppinfo);
- break;
- default:
- err = -EINVAL;
- }
- if (err)
- goto unlock;
-
- data->curr_oppinfo = new_oppinfo;
-unlock:
- mutex_unlock(&data->lock);
- if (err)
- return err;
- return NOTIFY_OK;
- case PM_POST_RESTORE:
- case PM_POST_SUSPEND:
- /* Reactivate */
- mutex_lock(&data->lock);
- data->disabled = false;
- mutex_unlock(&data->lock);
- return NOTIFY_OK;
- }
-
- return NOTIFY_DONE;
-}
-
-static int exynos4_busfreq_probe(struct platform_device *pdev)
-{
- struct busfreq_data *data;
- struct busfreq_ppmu_data *ppmu_data;
- struct dev_pm_opp *opp;
- struct device *dev = &pdev->dev;
- int err = 0;
-
- data = devm_kzalloc(&pdev->dev, sizeof(struct busfreq_data), GFP_KERNEL);
- if (data == NULL) {
- dev_err(dev, "Cannot allocate memory.\n");
- return -ENOMEM;
- }
-
- ppmu_data = &data->ppmu_data;
- ppmu_data->ppmu_end = PPMU_END;
- ppmu_data->ppmu = devm_kzalloc(dev,
- sizeof(struct exynos_ppmu) * PPMU_END,
- GFP_KERNEL);
- if (!ppmu_data->ppmu) {
- dev_err(dev, "Failed to allocate memory for exynos_ppmu\n");
- return -ENOMEM;
- }
-
- data->type = pdev->id_entry->driver_data;
- ppmu_data->ppmu[PPMU_DMC0].hw_base = S5P_VA_DMC0;
- ppmu_data->ppmu[PPMU_DMC1].hw_base = S5P_VA_DMC1;
- data->pm_notifier.notifier_call = exynos4_busfreq_pm_notifier_event;
- data->dev = dev;
- mutex_init(&data->lock);
-
- switch (data->type) {
- case TYPE_BUSF_EXYNOS4210:
- err = exynos4210_init_tables(data);
- break;
- case TYPE_BUSF_EXYNOS4x12:
- err = exynos4x12_init_tables(data);
- break;
- default:
- dev_err(dev, "Cannot determine the device id %d\n", data->type);
- err = -EINVAL;
- }
- if (err) {
- dev_err(dev, "Cannot initialize busfreq table %d\n",
- data->type);
- return err;
- }
-
- data->vdd_int = devm_regulator_get(dev, "vdd_int");
- if (IS_ERR(data->vdd_int)) {
- dev_err(dev, "Cannot get the regulator \"vdd_int\"\n");
- return PTR_ERR(data->vdd_int);
- }
- if (data->type == TYPE_BUSF_EXYNOS4x12) {
- data->vdd_mif = devm_regulator_get(dev, "vdd_mif");
- if (IS_ERR(data->vdd_mif)) {
- dev_err(dev, "Cannot get the regulator \"vdd_mif\"\n");
- return PTR_ERR(data->vdd_mif);
- }
- }
-
- rcu_read_lock();
- opp = dev_pm_opp_find_freq_floor(dev,
- &exynos4_devfreq_profile.initial_freq);
- if (IS_ERR(opp)) {
- rcu_read_unlock();
- dev_err(dev, "Invalid initial frequency %lu kHz.\n",
- exynos4_devfreq_profile.initial_freq);
- return PTR_ERR(opp);
- }
- data->curr_oppinfo.rate = dev_pm_opp_get_freq(opp);
- data->curr_oppinfo.volt = dev_pm_opp_get_voltage(opp);
- rcu_read_unlock();
-
- platform_set_drvdata(pdev, data);
-
- data->devfreq = devm_devfreq_add_device(dev, &exynos4_devfreq_profile,
- "simple_ondemand", NULL);
- if (IS_ERR(data->devfreq))
- return PTR_ERR(data->devfreq);
-
- /*
- * Start PPMU (Performance Profiling Monitoring Unit) to check
- * utilization of each IP in the Exynos4 SoC.
- */
- busfreq_mon_reset(ppmu_data);
-
- /* Register opp_notifier for Exynos4 busfreq */
- err = devm_devfreq_register_opp_notifier(dev, data->devfreq);
- if (err < 0) {
- dev_err(dev, "Failed to register opp notifier\n");
- return err;
- }
-
- /* Register pm_notifier for Exynos4 busfreq */
- err = register_pm_notifier(&data->pm_notifier);
- if (err) {
- dev_err(dev, "Failed to setup pm notifier\n");
- return err;
- }
-
- return 0;
-}
-
-static int exynos4_busfreq_remove(struct platform_device *pdev)
-{
- struct busfreq_data *data = platform_get_drvdata(pdev);
-
- /* Unregister all of notifier chain */
- unregister_pm_notifier(&data->pm_notifier);
-
- return 0;
-}
-
-#ifdef CONFIG_PM_SLEEP
-static int exynos4_busfreq_resume(struct device *dev)
-{
- struct busfreq_data *data = dev_get_drvdata(dev);
- struct busfreq_ppmu_data *ppmu_data = &data->ppmu_data;
-
- busfreq_mon_reset(ppmu_data);
- return 0;
-}
-#endif
-
-static SIMPLE_DEV_PM_OPS(exynos4_busfreq_pm_ops, NULL, exynos4_busfreq_resume);
-
-static const struct platform_device_id exynos4_busfreq_id[] = {
- { "exynos4210-busfreq", TYPE_BUSF_EXYNOS4210 },
- { "exynos4412-busfreq", TYPE_BUSF_EXYNOS4x12 },
- { "exynos4212-busfreq", TYPE_BUSF_EXYNOS4x12 },
- { },
-};
-
-static struct platform_driver exynos4_busfreq_driver = {
- .probe = exynos4_busfreq_probe,
- .remove = exynos4_busfreq_remove,
- .id_table = exynos4_busfreq_id,
- .driver = {
- .name = "exynos4-busfreq",
- .pm = &exynos4_busfreq_pm_ops,
- },
-};
-
-static int __init exynos4_busfreq_init(void)
-{
- return platform_driver_register(&exynos4_busfreq_driver);
-}
-late_initcall(exynos4_busfreq_init);
-
-static void __exit exynos4_busfreq_exit(void)
-{
- platform_driver_unregister(&exynos4_busfreq_driver);
-}
-module_exit(exynos4_busfreq_exit);
-
-MODULE_LICENSE("GPL");
-MODULE_DESCRIPTION("EXYNOS4 busfreq driver with devfreq framework");
-MODULE_AUTHOR("MyungJoo Ham <myungjoo.ham@samsung.com>");
deleted file mode 100644
@@ -1,110 +0,0 @@
-/*
- * Copyright (c) 2013 Samsung Electronics Co., Ltd.
- * http://www.samsung.com/
- *
- * EXYNOS4 BUS header
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __DEVFREQ_EXYNOS4_BUS_H
-#define __DEVFREQ_EXYNOS4_BUS_H __FILE__
-
-#include <mach/map.h>
-
-#define EXYNOS4_CLKDIV_LEFTBUS (S5P_VA_CMU + 0x04500)
-#define EXYNOS4_CLKDIV_STAT_LEFTBUS (S5P_VA_CMU + 0x04600)
-
-#define EXYNOS4_CLKDIV_RIGHTBUS (S5P_VA_CMU + 0x08500)
-#define EXYNOS4_CLKDIV_STAT_RIGHTBUS (S5P_VA_CMU + 0x08600)
-
-#define EXYNOS4_CLKDIV_TOP (S5P_VA_CMU + 0x0C510)
-#define EXYNOS4_CLKDIV_CAM (S5P_VA_CMU + 0x0C520)
-#define EXYNOS4_CLKDIV_MFC (S5P_VA_CMU + 0x0C528)
-
-#define EXYNOS4_CLKDIV_STAT_TOP (S5P_VA_CMU + 0x0C610)
-#define EXYNOS4_CLKDIV_STAT_MFC (S5P_VA_CMU + 0x0C628)
-
-#define EXYNOS4210_CLKGATE_IP_IMAGE (S5P_VA_CMU + 0x0C930)
-#define EXYNOS4212_CLKGATE_IP_IMAGE (S5P_VA_CMU + 0x04930)
-
-#define EXYNOS4_CLKDIV_DMC0 (S5P_VA_CMU + 0x10500)
-#define EXYNOS4_CLKDIV_DMC1 (S5P_VA_CMU + 0x10504)
-#define EXYNOS4_CLKDIV_STAT_DMC0 (S5P_VA_CMU + 0x10600)
-#define EXYNOS4_CLKDIV_STAT_DMC1 (S5P_VA_CMU + 0x10604)
-
-#define EXYNOS4_DMC_PAUSE_CTRL (S5P_VA_CMU + 0x11094)
-#define EXYNOS4_DMC_PAUSE_ENABLE (1 << 0)
-
-#define EXYNOS4_CLKDIV_DMC0_ACP_SHIFT (0)
-#define EXYNOS4_CLKDIV_DMC0_ACP_MASK (0x7 << EXYNOS4_CLKDIV_DMC0_ACP_SHIFT)
-#define EXYNOS4_CLKDIV_DMC0_ACPPCLK_SHIFT (4)
-#define EXYNOS4_CLKDIV_DMC0_ACPPCLK_MASK (0x7 << EXYNOS4_CLKDIV_DMC0_ACPPCLK_SHIFT)
-#define EXYNOS4_CLKDIV_DMC0_DPHY_SHIFT (8)
-#define EXYNOS4_CLKDIV_DMC0_DPHY_MASK (0x7 << EXYNOS4_CLKDIV_DMC0_DPHY_SHIFT)
-#define EXYNOS4_CLKDIV_DMC0_DMC_SHIFT (12)
-#define EXYNOS4_CLKDIV_DMC0_DMC_MASK (0x7 << EXYNOS4_CLKDIV_DMC0_DMC_SHIFT)
-#define EXYNOS4_CLKDIV_DMC0_DMCD_SHIFT (16)
-#define EXYNOS4_CLKDIV_DMC0_DMCD_MASK (0x7 << EXYNOS4_CLKDIV_DMC0_DMCD_SHIFT)
-#define EXYNOS4_CLKDIV_DMC0_DMCP_SHIFT (20)
-#define EXYNOS4_CLKDIV_DMC0_DMCP_MASK (0x7 << EXYNOS4_CLKDIV_DMC0_DMCP_SHIFT)
-#define EXYNOS4_CLKDIV_DMC0_COPY2_SHIFT (24)
-#define EXYNOS4_CLKDIV_DMC0_COPY2_MASK (0x7 << EXYNOS4_CLKDIV_DMC0_COPY2_SHIFT)
-#define EXYNOS4_CLKDIV_DMC0_CORETI_SHIFT (28)
-#define EXYNOS4_CLKDIV_DMC0_CORETI_MASK (0x7 << EXYNOS4_CLKDIV_DMC0_CORETI_SHIFT)
-
-#define EXYNOS4_CLKDIV_DMC1_G2D_ACP_SHIFT (0)
-#define EXYNOS4_CLKDIV_DMC1_G2D_ACP_MASK (0xf << EXYNOS4_CLKDIV_DMC1_G2D_ACP_SHIFT)
-#define EXYNOS4_CLKDIV_DMC1_C2C_SHIFT (4)
-#define EXYNOS4_CLKDIV_DMC1_C2C_MASK (0x7 << EXYNOS4_CLKDIV_DMC1_C2C_SHIFT)
-#define EXYNOS4_CLKDIV_DMC1_PWI_SHIFT (8)
-#define EXYNOS4_CLKDIV_DMC1_PWI_MASK (0xf << EXYNOS4_CLKDIV_DMC1_PWI_SHIFT)
-#define EXYNOS4_CLKDIV_DMC1_C2CACLK_SHIFT (12)
-#define EXYNOS4_CLKDIV_DMC1_C2CACLK_MASK (0x7 << EXYNOS4_CLKDIV_DMC1_C2CACLK_SHIFT)
-#define EXYNOS4_CLKDIV_DMC1_DVSEM_SHIFT (16)
-#define EXYNOS4_CLKDIV_DMC1_DVSEM_MASK (0x7f << EXYNOS4_CLKDIV_DMC1_DVSEM_SHIFT)
-#define EXYNOS4_CLKDIV_DMC1_DPM_SHIFT (24)
-#define EXYNOS4_CLKDIV_DMC1_DPM_MASK (0x7f << EXYNOS4_CLKDIV_DMC1_DPM_SHIFT)
-
-#define EXYNOS4_CLKDIV_MFC_SHIFT (0)
-#define EXYNOS4_CLKDIV_MFC_MASK (0x7 << EXYNOS4_CLKDIV_MFC_SHIFT)
-
-#define EXYNOS4_CLKDIV_TOP_ACLK200_SHIFT (0)
-#define EXYNOS4_CLKDIV_TOP_ACLK200_MASK (0x7 << EXYNOS4_CLKDIV_TOP_ACLK200_SHIFT)
-#define EXYNOS4_CLKDIV_TOP_ACLK100_SHIFT (4)
-#define EXYNOS4_CLKDIV_TOP_ACLK100_MASK (0xF << EXYNOS4_CLKDIV_TOP_ACLK100_SHIFT)
-#define EXYNOS4_CLKDIV_TOP_ACLK160_SHIFT (8)
-#define EXYNOS4_CLKDIV_TOP_ACLK160_MASK (0x7 << EXYNOS4_CLKDIV_TOP_ACLK160_SHIFT)
-#define EXYNOS4_CLKDIV_TOP_ACLK133_SHIFT (12)
-#define EXYNOS4_CLKDIV_TOP_ACLK133_MASK (0x7 << EXYNOS4_CLKDIV_TOP_ACLK133_SHIFT)
-#define EXYNOS4_CLKDIV_TOP_ONENAND_SHIFT (16)
-#define EXYNOS4_CLKDIV_TOP_ONENAND_MASK (0x7 << EXYNOS4_CLKDIV_TOP_ONENAND_SHIFT)
-#define EXYNOS4_CLKDIV_TOP_ACLK266_GPS_SHIFT (20)
-#define EXYNOS4_CLKDIV_TOP_ACLK266_GPS_MASK (0x7 << EXYNOS4_CLKDIV_TOP_ACLK266_GPS_SHIFT)
-#define EXYNOS4_CLKDIV_TOP_ACLK400_MCUISP_SHIFT (24)
-#define EXYNOS4_CLKDIV_TOP_ACLK400_MCUISP_MASK (0x7 << EXYNOS4_CLKDIV_TOP_ACLK400_MCUISP_SHIFT)
-
-#define EXYNOS4_CLKDIV_BUS_GDLR_SHIFT (0)
-#define EXYNOS4_CLKDIV_BUS_GDLR_MASK (0x7 << EXYNOS4_CLKDIV_BUS_GDLR_SHIFT)
-#define EXYNOS4_CLKDIV_BUS_GPLR_SHIFT (4)
-#define EXYNOS4_CLKDIV_BUS_GPLR_MASK (0x7 << EXYNOS4_CLKDIV_BUS_GPLR_SHIFT)
-
-#define EXYNOS4_CLKDIV_CAM_FIMC0_SHIFT (0)
-#define EXYNOS4_CLKDIV_CAM_FIMC0_MASK (0xf << EXYNOS4_CLKDIV_CAM_FIMC0_SHIFT)
-#define EXYNOS4_CLKDIV_CAM_FIMC1_SHIFT (4)
-#define EXYNOS4_CLKDIV_CAM_FIMC1_MASK (0xf << EXYNOS4_CLKDIV_CAM_FIMC1_SHIFT)
-#define EXYNOS4_CLKDIV_CAM_FIMC2_SHIFT (8)
-#define EXYNOS4_CLKDIV_CAM_FIMC2_MASK (0xf << EXYNOS4_CLKDIV_CAM_FIMC2_SHIFT)
-#define EXYNOS4_CLKDIV_CAM_FIMC3_SHIFT (12)
-#define EXYNOS4_CLKDIV_CAM_FIMC3_MASK (0xf << EXYNOS4_CLKDIV_CAM_FIMC3_SHIFT)
-
-#define EXYNOS4_CLKDIV_CAM1 (S5P_VA_CMU + 0x0C568)
-
-#define EXYNOS4_CLKDIV_STAT_CAM1 (S5P_VA_CMU + 0x0C668)
-
-#define EXYNOS4_CLKDIV_CAM1_JPEG_SHIFT (0)
-#define EXYNOS4_CLKDIV_CAM1_JPEG_MASK (0xf << EXYNOS4_CLKDIV_CAM1_JPEG_SHIFT)
-
-#endif /* __DEVFREQ_EXYNOS4_BUS_H */
deleted file mode 100644
@@ -1,431 +0,0 @@
-/*
- * Copyright (c) 2012 Samsung Electronics Co., Ltd.
- * http://www.samsung.com/
- *
- * EXYNOS5 INT clock frequency scaling support using DEVFREQ framework
- * Based on work done by Jonghwan Choi <jhbird.choi@samsung.com>
- * Support for only EXYNOS5250 is present.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/module.h>
-#include <linux/devfreq.h>
-#include <linux/io.h>
-#include <linux/pm_opp.h>
-#include <linux/slab.h>
-#include <linux/suspend.h>
-#include <linux/clk.h>
-#include <linux/delay.h>
-#include <linux/platform_device.h>
-#include <linux/pm_qos.h>
-#include <linux/regulator/consumer.h>
-#include <linux/of_address.h>
-#include <linux/of_platform.h>
-
-#include "exynos_ppmu.h"
-
-#define MAX_SAFEVOLT 1100000 /* 1.10V */
-/* Assume that the bus is saturated if the utilization is 25% */
-#define INT_BUS_SATURATION_RATIO 25
-
-enum int_level_idx {
- LV_0,
- LV_1,
- LV_2,
- LV_3,
- LV_4,
- _LV_END
-};
-
-enum exynos_ppmu_list {
- PPMU_RIGHT,
- PPMU_END,
-};
-
-struct busfreq_data_int {
- struct device *dev;
- struct devfreq *devfreq;
- struct regulator *vdd_int;
- struct busfreq_ppmu_data ppmu_data;
- unsigned long curr_freq;
- bool disabled;
-
- struct notifier_block pm_notifier;
- struct mutex lock;
- struct pm_qos_request int_req;
- struct clk *int_clk;
-};
-
-struct int_bus_opp_table {
- unsigned int idx;
- unsigned long clk;
- unsigned long volt;
-};
-
-static struct int_bus_opp_table exynos5_int_opp_table[] = {
- {LV_0, 266000, 1025000},
- {LV_1, 200000, 1025000},
- {LV_2, 160000, 1025000},
- {LV_3, 133000, 1025000},
- {LV_4, 100000, 1025000},
- {0, 0, 0},
-};
-
-static int exynos5_int_setvolt(struct busfreq_data_int *data,
- unsigned long volt)
-{
- return regulator_set_voltage(data->vdd_int, volt, MAX_SAFEVOLT);
-}
-
-static int exynos5_busfreq_int_target(struct device *dev, unsigned long *_freq,
- u32 flags)
-{
- int err = 0;
- struct platform_device *pdev = container_of(dev, struct platform_device,
- dev);
- struct busfreq_data_int *data = platform_get_drvdata(pdev);
- struct dev_pm_opp *opp;
- unsigned long old_freq, freq;
- unsigned long volt;
-
- rcu_read_lock();
- opp = devfreq_recommended_opp(dev, _freq, flags);
- if (IS_ERR(opp)) {
- rcu_read_unlock();
- dev_err(dev, "%s: Invalid OPP.\n", __func__);
- return PTR_ERR(opp);
- }
-
- freq = dev_pm_opp_get_freq(opp);
- volt = dev_pm_opp_get_voltage(opp);
- rcu_read_unlock();
-
- old_freq = data->curr_freq;
-
- if (old_freq == freq)
- return 0;
-
- dev_dbg(dev, "targeting %lukHz %luuV\n", freq, volt);
-
- mutex_lock(&data->lock);
-
- if (data->disabled)
- goto out;
-
- if (freq > exynos5_int_opp_table[0].clk)
- pm_qos_update_request(&data->int_req, freq * 16 / 1000);
- else
- pm_qos_update_request(&data->int_req, -1);
-
- if (old_freq < freq)
- err = exynos5_int_setvolt(data, volt);
- if (err)
- goto out;
-
- err = clk_set_rate(data->int_clk, freq * 1000);
-
- if (err)
- goto out;
-
- if (old_freq > freq)
- err = exynos5_int_setvolt(data, volt);
- if (err)
- goto out;
-
- data->curr_freq = freq;
-out:
- mutex_unlock(&data->lock);
- return err;
-}
-
-static int exynos5_int_get_dev_status(struct device *dev,
- struct devfreq_dev_status *stat)
-{
- struct platform_device *pdev = container_of(dev, struct platform_device,
- dev);
- struct busfreq_data_int *data = platform_get_drvdata(pdev);
- struct busfreq_ppmu_data *ppmu_data = &data->ppmu_data;
- int busier_dmc;
-
- exynos_read_ppmu(ppmu_data);
- busier_dmc = exynos_get_busier_ppmu(ppmu_data);
-
- stat->current_frequency = data->curr_freq;
-
- /* Number of cycles spent on memory access */
- stat->busy_time = ppmu_data->ppmu[busier_dmc].count[PPMU_PMNCNT3];
- stat->busy_time *= 100 / INT_BUS_SATURATION_RATIO;
- stat->total_time = ppmu_data->ppmu[busier_dmc].ccnt;
-
- return 0;
-}
-
-static struct devfreq_dev_profile exynos5_devfreq_int_profile = {
- .initial_freq = 160000,
- .polling_ms = 100,
- .target = exynos5_busfreq_int_target,
- .get_dev_status = exynos5_int_get_dev_status,
-};
-
-static int exynos5250_init_int_tables(struct busfreq_data_int *data)
-{
- int i, err = 0;
-
- for (i = LV_0; i < _LV_END; i++) {
- err = dev_pm_opp_add(data->dev, exynos5_int_opp_table[i].clk,
- exynos5_int_opp_table[i].volt);
- if (err) {
- dev_err(data->dev, "Cannot add opp entries.\n");
- return err;
- }
- }
-
- return 0;
-}
-
-static int exynos5_busfreq_int_pm_notifier_event(struct notifier_block *this,
- unsigned long event, void *ptr)
-{
- struct busfreq_data_int *data = container_of(this,
- struct busfreq_data_int, pm_notifier);
- struct dev_pm_opp *opp;
- unsigned long maxfreq = ULONG_MAX;
- unsigned long freq;
- unsigned long volt;
- int err = 0;
-
- switch (event) {
- case PM_SUSPEND_PREPARE:
- /* Set Fastest and Deactivate DVFS */
- mutex_lock(&data->lock);
-
- data->disabled = true;
-
- rcu_read_lock();
- opp = dev_pm_opp_find_freq_floor(data->dev, &maxfreq);
- if (IS_ERR(opp)) {
- rcu_read_unlock();
- err = PTR_ERR(opp);
- goto unlock;
- }
- freq = dev_pm_opp_get_freq(opp);
- volt = dev_pm_opp_get_voltage(opp);
- rcu_read_unlock();
-
- err = exynos5_int_setvolt(data, volt);
- if (err)
- goto unlock;
-
- err = clk_set_rate(data->int_clk, freq * 1000);
-
- if (err)
- goto unlock;
-
- data->curr_freq = freq;
-unlock:
- mutex_unlock(&data->lock);
- if (err)
- return NOTIFY_BAD;
- return NOTIFY_OK;
- case PM_POST_RESTORE:
- case PM_POST_SUSPEND:
- /* Reactivate */
- mutex_lock(&data->lock);
- data->disabled = false;
- mutex_unlock(&data->lock);
- return NOTIFY_OK;
- }
-
- return NOTIFY_DONE;
-}
-
-static int exynos5_busfreq_int_probe(struct platform_device *pdev)
-{
- struct busfreq_data_int *data;
- struct busfreq_ppmu_data *ppmu_data;
- struct dev_pm_opp *opp;
- struct device *dev = &pdev->dev;
- struct device_node *np;
- unsigned long initial_freq;
- unsigned long initial_volt;
- int err = 0;
- int i;
-
- data = devm_kzalloc(&pdev->dev, sizeof(struct busfreq_data_int),
- GFP_KERNEL);
- if (data == NULL) {
- dev_err(dev, "Cannot allocate memory.\n");
- return -ENOMEM;
- }
-
- ppmu_data = &data->ppmu_data;
- ppmu_data->ppmu_end = PPMU_END;
- ppmu_data->ppmu = devm_kzalloc(dev,
- sizeof(struct exynos_ppmu) * PPMU_END,
- GFP_KERNEL);
- if (!ppmu_data->ppmu) {
- dev_err(dev, "Failed to allocate memory for exynos_ppmu\n");
- return -ENOMEM;
- }
-
- np = of_find_compatible_node(NULL, NULL, "samsung,exynos5250-ppmu");
- if (np == NULL) {
- pr_err("Unable to find PPMU node\n");
- return -ENOENT;
- }
-
- for (i = 0; i < ppmu_data->ppmu_end; i++) {
- /* map PPMU memory region */
- ppmu_data->ppmu[i].hw_base = of_iomap(np, i);
- if (ppmu_data->ppmu[i].hw_base == NULL) {
- dev_err(&pdev->dev, "failed to map memory region\n");
- return -ENOMEM;
- }
- }
- data->pm_notifier.notifier_call = exynos5_busfreq_int_pm_notifier_event;
- data->dev = dev;
- mutex_init(&data->lock);
-
- err = exynos5250_init_int_tables(data);
- if (err)
- return err;
-
- data->vdd_int = devm_regulator_get(dev, "vdd_int");
- if (IS_ERR(data->vdd_int)) {
- dev_err(dev, "Cannot get the regulator \"vdd_int\"\n");
- return PTR_ERR(data->vdd_int);
- }
-
- data->int_clk = devm_clk_get(dev, "int_clk");
- if (IS_ERR(data->int_clk)) {
- dev_err(dev, "Cannot get clock \"int_clk\"\n");
- return PTR_ERR(data->int_clk);
- }
-
- rcu_read_lock();
- opp = dev_pm_opp_find_freq_floor(dev,
- &exynos5_devfreq_int_profile.initial_freq);
- if (IS_ERR(opp)) {
- rcu_read_unlock();
- dev_err(dev, "Invalid initial frequency %lu kHz.\n",
- exynos5_devfreq_int_profile.initial_freq);
- return PTR_ERR(opp);
- }
- initial_freq = dev_pm_opp_get_freq(opp);
- initial_volt = dev_pm_opp_get_voltage(opp);
- rcu_read_unlock();
- data->curr_freq = initial_freq;
-
- err = clk_set_rate(data->int_clk, initial_freq * 1000);
- if (err) {
- dev_err(dev, "Failed to set initial frequency\n");
- return err;
- }
-
- err = exynos5_int_setvolt(data, initial_volt);
- if (err)
- return err;
-
- platform_set_drvdata(pdev, data);
-
- busfreq_mon_reset(ppmu_data);
-
- data->devfreq = devm_devfreq_add_device(dev, &exynos5_devfreq_int_profile,
- "simple_ondemand", NULL);
- if (IS_ERR(data->devfreq))
- return PTR_ERR(data->devfreq);
-
- err = devm_devfreq_register_opp_notifier(dev, data->devfreq);
- if (err < 0) {
- dev_err(dev, "Failed to register opp notifier\n");
- return err;
- }
-
- err = register_pm_notifier(&data->pm_notifier);
- if (err) {
- dev_err(dev, "Failed to setup pm notifier\n");
- return err;
- }
-
- /* TODO: Add a new QOS class for int/mif bus */
- pm_qos_add_request(&data->int_req, PM_QOS_NETWORK_THROUGHPUT, -1);
-
- return 0;
-}
-
-static int exynos5_busfreq_int_remove(struct platform_device *pdev)
-{
- struct busfreq_data_int *data = platform_get_drvdata(pdev);
-
- pm_qos_remove_request(&data->int_req);
- unregister_pm_notifier(&data->pm_notifier);
-
- return 0;
-}
-
-#ifdef CONFIG_PM_SLEEP
-static int exynos5_busfreq_int_resume(struct device *dev)
-{
- struct platform_device *pdev = container_of(dev, struct platform_device,
- dev);
- struct busfreq_data_int *data = platform_get_drvdata(pdev);
- struct busfreq_ppmu_data *ppmu_data = &data->ppmu_data;
-
- busfreq_mon_reset(ppmu_data);
- return 0;
-}
-static const struct dev_pm_ops exynos5_busfreq_int_pm = {
- .resume = exynos5_busfreq_int_resume,
-};
-#endif
-static SIMPLE_DEV_PM_OPS(exynos5_busfreq_int_pm_ops, NULL,
- exynos5_busfreq_int_resume);
-
-/* platform device pointer for exynos5 devfreq device. */
-static struct platform_device *exynos5_devfreq_pdev;
-
-static struct platform_driver exynos5_busfreq_int_driver = {
- .probe = exynos5_busfreq_int_probe,
- .remove = exynos5_busfreq_int_remove,
- .driver = {
- .name = "exynos5-bus-int",
- .pm = &exynos5_busfreq_int_pm_ops,
- },
-};
-
-static int __init exynos5_busfreq_int_init(void)
-{
- int ret;
-
- ret = platform_driver_register(&exynos5_busfreq_int_driver);
- if (ret < 0)
- goto out;
-
- exynos5_devfreq_pdev =
- platform_device_register_simple("exynos5-bus-int", -1, NULL, 0);
- if (IS_ERR(exynos5_devfreq_pdev)) {
- ret = PTR_ERR(exynos5_devfreq_pdev);
- goto out1;
- }
-
- return 0;
-out1:
- platform_driver_unregister(&exynos5_busfreq_int_driver);
-out:
- return ret;
-}
-late_initcall(exynos5_busfreq_int_init);
-
-static void __exit exynos5_busfreq_int_exit(void)
-{
- platform_device_unregister(exynos5_devfreq_pdev);
- platform_driver_unregister(&exynos5_busfreq_int_driver);
-}
-module_exit(exynos5_busfreq_int_exit);
-
-MODULE_LICENSE("GPL");
-MODULE_DESCRIPTION("EXYNOS5 busfreq driver with devfreq framework");
deleted file mode 100644
@@ -1,119 +0,0 @@
-/*
- * Copyright (c) 2012 Samsung Electronics Co., Ltd.
- * http://www.samsung.com/
- *
- * EXYNOS - PPMU support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/io.h>
-
-#include "exynos_ppmu.h"
-
-void exynos_ppmu_reset(void __iomem *ppmu_base)
-{
- __raw_writel(PPMU_CYCLE_RESET | PPMU_COUNTER_RESET, ppmu_base);
- __raw_writel(PPMU_ENABLE_CYCLE |
- PPMU_ENABLE_COUNT0 |
- PPMU_ENABLE_COUNT1 |
- PPMU_ENABLE_COUNT2 |
- PPMU_ENABLE_COUNT3,
- ppmu_base + PPMU_CNTENS);
-}
-
-void exynos_ppmu_setevent(void __iomem *ppmu_base, unsigned int ch,
- unsigned int evt)
-{
- __raw_writel(evt, ppmu_base + PPMU_BEVTSEL(ch));
-}
-
-void exynos_ppmu_start(void __iomem *ppmu_base)
-{
- __raw_writel(PPMU_ENABLE, ppmu_base);
-}
-
-void exynos_ppmu_stop(void __iomem *ppmu_base)
-{
- __raw_writel(PPMU_DISABLE, ppmu_base);
-}
-
-unsigned int exynos_ppmu_read(void __iomem *ppmu_base, unsigned int ch)
-{
- unsigned int total;
-
- if (ch == PPMU_PMNCNT3)
- total = ((__raw_readl(ppmu_base + PMCNT_OFFSET(ch)) << 8) |
- __raw_readl(ppmu_base + PMCNT_OFFSET(ch + 1)));
- else
- total = __raw_readl(ppmu_base + PMCNT_OFFSET(ch));
-
- return total;
-}
-
-void busfreq_mon_reset(struct busfreq_ppmu_data *ppmu_data)
-{
- unsigned int i;
-
- for (i = 0; i < ppmu_data->ppmu_end; i++) {
- void __iomem *ppmu_base = ppmu_data->ppmu[i].hw_base;
-
- /* Reset the performance and cycle counters */
- exynos_ppmu_reset(ppmu_base);
-
- /* Setup count registers to monitor read/write transactions */
- ppmu_data->ppmu[i].event[PPMU_PMNCNT3] = RDWR_DATA_COUNT;
- exynos_ppmu_setevent(ppmu_base, PPMU_PMNCNT3,
- ppmu_data->ppmu[i].event[PPMU_PMNCNT3]);
-
- exynos_ppmu_start(ppmu_base);
- }
-}
-EXPORT_SYMBOL(busfreq_mon_reset);
-
-void exynos_read_ppmu(struct busfreq_ppmu_data *ppmu_data)
-{
- int i, j;
-
- for (i = 0; i < ppmu_data->ppmu_end; i++) {
- void __iomem *ppmu_base = ppmu_data->ppmu[i].hw_base;
-
- exynos_ppmu_stop(ppmu_base);
-
- /* Update local data from PPMU */
- ppmu_data->ppmu[i].ccnt = __raw_readl(ppmu_base + PPMU_CCNT);
-
- for (j = PPMU_PMNCNT0; j < PPMU_PMNCNT_MAX; j++) {
- if (ppmu_data->ppmu[i].event[j] == 0)
- ppmu_data->ppmu[i].count[j] = 0;
- else
- ppmu_data->ppmu[i].count[j] =
- exynos_ppmu_read(ppmu_base, j);
- }
- }
-
- busfreq_mon_reset(ppmu_data);
-}
-EXPORT_SYMBOL(exynos_read_ppmu);
-
-int exynos_get_busier_ppmu(struct busfreq_ppmu_data *ppmu_data)
-{
- unsigned int count = 0;
- int i, j, busy = 0;
-
- for (i = 0; i < ppmu_data->ppmu_end; i++) {
- for (j = PPMU_PMNCNT0; j < PPMU_PMNCNT_MAX; j++) {
- if (ppmu_data->ppmu[i].count[j] > count) {
- count = ppmu_data->ppmu[i].count[j];
- busy = i;
- }
- }
- }
-
- return busy;
-}
-EXPORT_SYMBOL(exynos_get_busier_ppmu);
deleted file mode 100644
@@ -1,86 +0,0 @@
-/*
- * Copyright (c) 2012 Samsung Electronics Co., Ltd.
- * http://www.samsung.com/
- *
- * EXYNOS PPMU header
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __DEVFREQ_EXYNOS_PPMU_H
-#define __DEVFREQ_EXYNOS_PPMU_H __FILE__
-
-#include <linux/ktime.h>
-
-/* For PPMU Control */
-#define PPMU_ENABLE BIT(0)
-#define PPMU_DISABLE 0x0
-#define PPMU_CYCLE_RESET BIT(1)
-#define PPMU_COUNTER_RESET BIT(2)
-
-#define PPMU_ENABLE_COUNT0 BIT(0)
-#define PPMU_ENABLE_COUNT1 BIT(1)
-#define PPMU_ENABLE_COUNT2 BIT(2)
-#define PPMU_ENABLE_COUNT3 BIT(3)
-#define PPMU_ENABLE_CYCLE BIT(31)
-
-#define PPMU_CNTENS 0x10
-#define PPMU_FLAG 0x50
-#define PPMU_CCNT_OVERFLOW BIT(31)
-#define PPMU_CCNT 0x100
-
-#define PPMU_PMCNT0 0x110
-#define PPMU_PMCNT_OFFSET 0x10
-#define PMCNT_OFFSET(x) (PPMU_PMCNT0 + (PPMU_PMCNT_OFFSET * x))
-
-#define PPMU_BEVT0SEL 0x1000
-#define PPMU_BEVTSEL_OFFSET 0x100
-#define PPMU_BEVTSEL(x) (PPMU_BEVT0SEL + (ch * PPMU_BEVTSEL_OFFSET))
-
-/* For Event Selection */
-#define RD_DATA_COUNT 0x5
-#define WR_DATA_COUNT 0x6
-#define RDWR_DATA_COUNT 0x7
-
-enum ppmu_counter {
- PPMU_PMNCNT0,
- PPMU_PMCCNT1,
- PPMU_PMNCNT2,
- PPMU_PMNCNT3,
- PPMU_PMNCNT_MAX,
-};
-
-struct bus_opp_table {
- unsigned int idx;
- unsigned long clk;
- unsigned long volt;
-};
-
-struct exynos_ppmu {
- void __iomem *hw_base;
- unsigned int ccnt;
- unsigned int event[PPMU_PMNCNT_MAX];
- unsigned int count[PPMU_PMNCNT_MAX];
- unsigned long long ns;
- ktime_t reset_time;
- bool ccnt_overflow;
- bool count_overflow[PPMU_PMNCNT_MAX];
-};
-
-struct busfreq_ppmu_data {
- struct exynos_ppmu *ppmu;
- int ppmu_end;
-};
-
-void exynos_ppmu_reset(void __iomem *ppmu_base);
-void exynos_ppmu_setevent(void __iomem *ppmu_base, unsigned int ch,
- unsigned int evt);
-void exynos_ppmu_start(void __iomem *ppmu_base);
-void exynos_ppmu_stop(void __iomem *ppmu_base);
-unsigned int exynos_ppmu_read(void __iomem *ppmu_base, unsigned int ch);
-void busfreq_mon_reset(struct busfreq_ppmu_data *ppmu_data);
-void exynos_read_ppmu(struct busfreq_ppmu_data *ppmu_data);
-int exynos_get_busier_ppmu(struct busfreq_ppmu_data *ppmu_data);
-#endif /* __DEVFREQ_EXYNOS_PPMU_H */