diff mbox

[v3,1/3] ARM: dts: exynos: Define vqmmc for SD card and allow disabling regulators on Odroid X/X2/U3

Message ID 1462365840-27406-1-git-send-email-k.kozlowski@samsung.com (mailing list archive)
State Accepted
Headers show

Commit Message

Krzysztof Kozlowski May 4, 2016, 12:43 p.m. UTC 
The SD-card vmmc-supply contained incorrectly two regulators. The second
one is ignored. Fix this by defining proper vmmc and vqmmc supplies.
Additionally these regulators do not have to be always on, so allow
disabling them to reduce energy consumption.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>

---

Changes since v2:
1. Add Javier's tag.

Changes since v1:
1. None
---
 arch/arm/boot/dts/exynos4412-odroid-common.dtsi | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)
diff mbox

Patch

diff --git a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
index cab0f07d7d28..3d0d44581fbd 100644
--- a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
+++ b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
@@ -249,7 +249,6 @@ 
 				regulator-name = "VDDQ_MMC2_2.8V";
 				regulator-min-microvolt = <2800000>;
 				regulator-max-microvolt = <2800000>;
-				regulator-always-on;
 				regulator-boot-on;
 			};
 
@@ -345,7 +344,6 @@ 
 				regulator-name = "LDO21_3.3V";
 				regulator-min-microvolt = <3300000>;
 				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
 				regulator-boot-on;
 			};
 
@@ -482,7 +480,8 @@ 
 	bus-width = <4>;
 	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
 	pinctrl-names = "default";
-	vmmc-supply = <&ldo4_reg &ldo21_reg>;
+	vmmc-supply = <&ldo21_reg>;
+	vqmmc-supply = <&ldo4_reg>;
 	cd-gpios = <&gpk2 2 GPIO_ACTIVE_HIGH>;
 	cd-inverted;
 	status = "okay";