@@ -102,14 +102,14 @@
};
};
-&uart0 {
+&serial_0 {
status = "okay";
};
-&uart1 {
+&serial_1 {
status = "okay";
};
-&uart2 {
+&serial_2 {
status = "okay";
};
@@ -14,6 +14,7 @@
*/
#include "skeleton.dtsi"
+#include "exynos5.dtsi"
#include "exynos-syscon-restart.dtsi"
#include <dt-bindings/clock/exynos5410.h>
@@ -26,9 +27,6 @@
pinctrl1 = &pinctrl_1;
pinctrl2 = &pinctrl_2;
pinctrl3 = &pinctrl_3;
- serial0 = &uart0;
- serial1 = &uart1;
- serial2 = &uart2;
};
cpus {
@@ -70,49 +68,6 @@
#size-cells = <1>;
ranges;
- combiner: interrupt-controller@10440000 {
- compatible = "samsung,exynos4210-combiner";
- #interrupt-cells = <2>;
- interrupt-controller;
- samsung,combiner-nr = <32>;
- reg = <0x10440000 0x1000>;
- interrupts = <0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>,
- <0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>,
- <0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>,
- <0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>,
- <0 16 0>, <0 17 0>, <0 18 0>, <0 19 0>,
- <0 20 0>, <0 21 0>, <0 22 0>, <0 23 0>,
- <0 24 0>, <0 25 0>, <0 26 0>, <0 27 0>,
- <0 28 0>, <0 29 0>, <0 30 0>, <0 31 0>;
- };
-
- gic: interrupt-controller@10481000 {
- compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic";
- #interrupt-cells = <3>;
- interrupt-controller;
- reg = <0x10481000 0x1000>,
- <0x10482000 0x1000>,
- <0x10484000 0x2000>,
- <0x10486000 0x2000>;
- interrupts = <1 9 0xf04>;
- };
-
- chipid@10000000 {
- compatible = "samsung,exynos4210-chipid";
- reg = <0x10000000 0x100>;
- };
-
- sromc: memory-controller@12250000 {
- compatible = "samsung,exynos4210-srom";
- reg = <0x12250000 0x14>;
- #address-cells = <2>;
- #size-cells = <1>;
- ranges = <0 0 0x04000000 0x20000
- 1 0 0x05000000 0x20000
- 2 0 0x06000000 0x20000
- 3 0 0x07000000 0x20000>;
- };
-
pmu_system_controller: system-controller@10040000 {
compatible = "samsung,exynos5410-pmu", "syscon";
reg = <0x10040000 0x5000>;
@@ -236,34 +191,40 @@
reg = <0x03860000 0x1000>;
interrupts = <0 47 0>;
};
+ };
+};
- uart0: serial@12C00000 {
- compatible = "samsung,exynos4210-uart";
- reg = <0x12C00000 0x100>;
- interrupts = <0 51 0>;
- clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>;
- clock-names = "uart", "clk_uart_baud0";
- status = "disabled";
- };
+&pwm {
+ clocks = <&clock CLK_PWM>;
+ clock-names = "timers";
+};
- uart1: serial@12C10000 {
- compatible = "samsung,exynos4210-uart";
- reg = <0x12C10000 0x100>;
- interrupts = <0 52 0>;
- clocks = <&clock CLK_UART1>, <&clock CLK_SCLK_UART1>;
- clock-names = "uart", "clk_uart_baud0";
- status = "disabled";
- };
+&serial_0 {
+ clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>;
+ clock-names = "uart", "clk_uart_baud0";
+};
- uart2: serial@12C20000 {
- compatible = "samsung,exynos4210-uart";
- reg = <0x12C20000 0x100>;
- interrupts = <0 53 0>;
- clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>;
- clock-names = "uart", "clk_uart_baud0";
- status = "disabled";
- };
- };
+&serial_1 {
+ clocks = <&clock CLK_UART1>, <&clock CLK_SCLK_UART1>;
+ clock-names = "uart", "clk_uart_baud0";
+};
+
+&serial_2 {
+ clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>;
+ clock-names = "uart", "clk_uart_baud0";
+};
+
+&serial_3 {
+ status = "disabled";
+};
+
+&sromc {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ ranges = <0 0 0x04000000 0x20000
+ 1 0 0x05000000 0x20000
+ 2 0 0x06000000 0x20000
+ 3 0 0x07000000 0x20000>;
};
#include "exynos5410-pinctrl.dtsi"
The exynos5.dtsi is used for common nodes shared between Exynos5250 and Exynos542x. Since Exynos5410 is very similar to Exynos5420 it can include the common file as well to remove duplication and make everything more consistent. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> --- arch/arm/boot/dts/exynos5410-smdk5410.dts | 6 +- arch/arm/boot/dts/exynos5410.dtsi | 103 ++++++++++-------------------- 2 files changed, 35 insertions(+), 74 deletions(-)