| Message ID | 1466083407-28793-5-git-send-email-ldewangan@nvidia.com (mailing list archive) |
|---|---|
| State | Not Applicable |
| Headers | show |
Hello Laxman, On 06/16/2016 09:23 AM, Laxman Dewangan wrote: > Maxim Max77620 has one 32KHz clock output and the clock HW > IP used on this PMIC is same as what it is there in the MAX77686. > > Add clock driver support for MAX77620 on the MAX77686 driver. > > Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> > CC: Krzysztof Kozlowski <k.kozlowski@samsung.com> > CC: Javier Martinez Canillas <javier@dowhile0.org> > Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> > Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> > I already gave you my Reviewed-by for v1 but it seems you missed: Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> > --- > Changes from V1: > - Updated based on changes done in first patch. > --- > drivers/clk/Kconfig | 7 ++++--- > drivers/clk/clk-max77686.c | 18 ++++++++++++++++++ > 2 files changed, 22 insertions(+), 3 deletions(-) > > diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig > index 6afad74..d75f4c5 100644 > --- a/drivers/clk/Kconfig > +++ b/drivers/clk/Kconfig > @@ -32,10 +32,11 @@ config COMMON_CLK_WM831X > source "drivers/clk/versatile/Kconfig" > > config COMMON_CLK_MAX77686 > - tristate "Clock driver for Maxim 77686/77802 MFD" > - depends on MFD_MAX77686 > + tristate "Clock driver for Maxim 77686/77802/MAX77620 MFD" > + depends on MFD_MAX77686 || MFD_MAX77620 > ---help--- > - This driver supports Maxim 77686/77802 crystal oscillator clock. > + This driver supports Maxim 77686/77802/MAX77620 crystal oscillator And it seems you also missed the minor nit I mentioned in v1 about using 77620 instead of MAX77620 here for naming consistency with the other IP. Best regards,
On Friday 17 June 2016 11:33 AM, Krzysztof Kozlowski wrote: > On 06/16/2016 03:23 PM, Laxman Dewangan wrote: >> config COMMON_CLK_MAX77686 >> - tristate "Clock driver for Maxim 77686/77802 MFD" >> - depends on MFD_MAX77686 >> + tristate "Clock driver for Maxim 77686/77802/MAX77620 MFD" > You missed Javier's comment here. Just > "Maxim 77686/77802/77620" Sigh.. did not see this comment when going one by one.. really missed.. I will collect all Reviewed/ack/tested and will post V3 with fixing this. -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 06/16/2016 03:23 PM, Laxman Dewangan wrote: > Maxim Max77620 has one 32KHz clock output and the clock HW > IP used on this PMIC is same as what it is there in the MAX77686. > > Add clock driver support for MAX77620 on the MAX77686 driver. > > Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> > CC: Krzysztof Kozlowski <k.kozlowski@samsung.com> > CC: Javier Martinez Canillas <javier@dowhile0.org> > Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> > Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> > > --- > Changes from V1: > - Updated based on changes done in first patch. > --- > drivers/clk/Kconfig | 7 ++++--- > drivers/clk/clk-max77686.c | 18 ++++++++++++++++++ > 2 files changed, 22 insertions(+), 3 deletions(-) > > diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig > index 6afad74..d75f4c5 100644 > --- a/drivers/clk/Kconfig > +++ b/drivers/clk/Kconfig > @@ -32,10 +32,11 @@ config COMMON_CLK_WM831X > source "drivers/clk/versatile/Kconfig" > > config COMMON_CLK_MAX77686 > - tristate "Clock driver for Maxim 77686/77802 MFD" > - depends on MFD_MAX77686 > + tristate "Clock driver for Maxim 77686/77802/MAX77620 MFD" You missed Javier's comment here. Just "Maxim 77686/77802/77620" > + depends on MFD_MAX77686 || MFD_MAX77620 > ---help--- > - This driver supports Maxim 77686/77802 crystal oscillator clock. > + This driver supports Maxim 77686/77802/MAX77620 crystal oscillator Ditto Beside that: Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Best regards, Krzysztof -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 06/17/2016 07:53 AM, Laxman Dewangan wrote: > > On Friday 17 June 2016 11:33 AM, Krzysztof Kozlowski wrote: >> On 06/16/2016 03:23 PM, Laxman Dewangan wrote: >>> config COMMON_CLK_MAX77686 >>> - tristate "Clock driver for Maxim 77686/77802 MFD" >>> - depends on MFD_MAX77686 >>> + tristate "Clock driver for Maxim 77686/77802/MAX77620 MFD" >> You missed Javier's comment here. Just >> "Maxim 77686/77802/77620" > > Sigh.. did not see this comment when going one by one.. really missed.. > I will collect all Reviewed/ack/tested and will post V3 with fixing this. No problem. I think the device names could be in numerical order, so: Maxim 77620/77686/77802 Best regards, Krzysztof -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig index 6afad74..d75f4c5 100644 --- a/drivers/clk/Kconfig +++ b/drivers/clk/Kconfig @@ -32,10 +32,11 @@ config COMMON_CLK_WM831X source "drivers/clk/versatile/Kconfig" config COMMON_CLK_MAX77686 - tristate "Clock driver for Maxim 77686/77802 MFD" - depends on MFD_MAX77686 + tristate "Clock driver for Maxim 77686/77802/MAX77620 MFD" + depends on MFD_MAX77686 || MFD_MAX77620 ---help--- - This driver supports Maxim 77686/77802 crystal oscillator clock. + This driver supports Maxim 77686/77802/MAX77620 crystal oscillator + clock. config COMMON_CLK_RK808 tristate "Clock driver for RK808" diff --git a/drivers/clk/clk-max77686.c b/drivers/clk/clk-max77686.c index 9aba3a8..19f6208 100644 --- a/drivers/clk/clk-max77686.c +++ b/drivers/clk/clk-max77686.c @@ -25,6 +25,7 @@ #include <linux/err.h> #include <linux/module.h> #include <linux/platform_device.h> +#include <linux/mfd/max77620.h> #include <linux/mfd/max77686.h> #include <linux/mfd/max77686-private.h> #include <linux/clk-provider.h> @@ -35,12 +36,14 @@ #include <dt-bindings/clock/maxim,max77686.h> #include <dt-bindings/clock/maxim,max77802.h> +#include <dt-bindings/clock/maxim,max77620.h> #define MAX77802_CLOCK_LOW_JITTER_SHIFT 0x3 enum max77686_chip_name { CHIP_MAX77686, CHIP_MAX77802, + CHIP_MAX77620, }; struct max77686_hw_clk_info { @@ -97,6 +100,15 @@ max77686_hw_clk_info max77802_hw_clks_info[MAX77802_CLKS_NUM] = { }, }; +static const struct +max77686_hw_clk_info max77620_hw_clks_info[MAX77620_CLKS_NUM] = { + [MAX77620_CLK_32K_OUT0] = { + .name = "32khz_out0", + .clk_reg = MAX77620_REG_CNFG1_32K, + .clk_enable_mask = MAX77620_CNFG1_32K_OUT0_EN, + }, +}; + static struct max77686_clk_init_data *to_max77686_clk_init_data( struct clk_hw *hw) { @@ -181,6 +193,11 @@ static int max77686_clk_probe(struct platform_device *pdev) hw_clks = max77802_hw_clks_info; break; + case CHIP_MAX77620: + num_clks = MAX77620_CLKS_NUM; + hw_clks = max77620_hw_clks_info; + break; + default: dev_err(dev, "Unknown Chip ID\n"); return -EINVAL; @@ -284,6 +301,7 @@ static int max77686_clk_remove(struct platform_device *pdev) static const struct platform_device_id max77686_clk_id[] = { { "max77686-clk", .driver_data = CHIP_MAX77686, }, { "max77802-clk", .driver_data = CHIP_MAX77802, }, + { "max77620-clock", .driver_data = CHIP_MAX77620, }, {}, }; MODULE_DEVICE_TABLE(platform, max77686_clk_id);