Message ID | 1468570369-14355-1-git-send-email-k.kozlowski@samsung.com (mailing list archive) |
---|---|
State | Accepted |
Headers | show |
On 07/15/2016 01:42 PM, Krzysztof Kozlowski wrote: > Exynos5410 supports eMMC version 4.41 so HS200 is the top mode which > should be configured. This is reflected in usage of > "samsung,exynos5250-dw-mshc" compatible. However Odroid XU DTS > contained also property "mmc-hs400-1_8v" which is parsed by MMC core > therefore resulting in mixed configuration. MMC core set HS400 but > dwmmc_exynos driver did not configure the data strobe for HS400 DDR > mode. > > Removal of HS400 properties fixes semi-random mmc errors during boot: > mmc_host mmc0: Bus speed (slot 0) = 400000000Hz (slot req 200000000Hz, actual 200000000HZ div = 1) > mmc0: mmc_select_hs400 failed, error -84 > mmc0: error -84 whilst initialising MMC card > > Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> > Looks good, thanks. Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com> > --- > > Changes since v1: > 1. Remove also samsung,read-strobe-delay, suggested by Alim Akhtar. > --- > arch/arm/boot/dts/exynos5410-odroidxu.dts | 3 --- > 1 file changed, 3 deletions(-) > > diff --git a/arch/arm/boot/dts/exynos5410-odroidxu.dts b/arch/arm/boot/dts/exynos5410-odroidxu.dts > index d9499310a301..f6d135245a4b 100644 > --- a/arch/arm/boot/dts/exynos5410-odroidxu.dts > +++ b/arch/arm/boot/dts/exynos5410-odroidxu.dts > @@ -447,14 +447,11 @@ > samsung,dw-mshc-ciu-div = <3>; > samsung,dw-mshc-sdr-timing = <0 4>; > samsung,dw-mshc-ddr-timing = <0 2>; > - samsung,dw-mshc-hs400-timing = <0 2>; > - samsung,read-strobe-delay = <90>; > pinctrl-names = "default"; > pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8 &sd0_cd>; > bus-width = <8>; > cap-mmc-highspeed; > mmc-hs200-1_8v; > - mmc-hs400-1_8v; > vmmc-supply = <&ldo20_reg>; > vqmmc-supply = <&ldo11_reg>; > }; > -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/arch/arm/boot/dts/exynos5410-odroidxu.dts b/arch/arm/boot/dts/exynos5410-odroidxu.dts index d9499310a301..f6d135245a4b 100644 --- a/arch/arm/boot/dts/exynos5410-odroidxu.dts +++ b/arch/arm/boot/dts/exynos5410-odroidxu.dts @@ -447,14 +447,11 @@ samsung,dw-mshc-ciu-div = <3>; samsung,dw-mshc-sdr-timing = <0 4>; samsung,dw-mshc-ddr-timing = <0 2>; - samsung,dw-mshc-hs400-timing = <0 2>; - samsung,read-strobe-delay = <90>; pinctrl-names = "default"; pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8 &sd0_cd>; bus-width = <8>; cap-mmc-highspeed; mmc-hs200-1_8v; - mmc-hs400-1_8v; vmmc-supply = <&ldo20_reg>; vqmmc-supply = <&ldo11_reg>; };
Exynos5410 supports eMMC version 4.41 so HS200 is the top mode which should be configured. This is reflected in usage of "samsung,exynos5250-dw-mshc" compatible. However Odroid XU DTS contained also property "mmc-hs400-1_8v" which is parsed by MMC core therefore resulting in mixed configuration. MMC core set HS400 but dwmmc_exynos driver did not configure the data strobe for HS400 DDR mode. Removal of HS400 properties fixes semi-random mmc errors during boot: mmc_host mmc0: Bus speed (slot 0) = 400000000Hz (slot req 200000000Hz, actual 200000000HZ div = 1) mmc0: mmc_select_hs400 failed, error -84 mmc0: error -84 whilst initialising MMC card Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> --- Changes since v1: 1. Remove also samsung,read-strobe-delay, suggested by Alim Akhtar. --- arch/arm/boot/dts/exynos5410-odroidxu.dts | 3 --- 1 file changed, 3 deletions(-)