| Message ID | 1500635990-19474-1-git-send-email-s.nawrocki@samsung.com (mailing list archive) |
|---|---|
| State | Not Applicable |
| Headers | show |
On 07/21/2017 01:19 PM, Sylwester Nawrocki wrote: > This patch fixes values of the EPLL K coefficient and changes > the EPLL output frequency values to match exactly what is > possible to achieve with given M, P, S, K coefficients. > This allows to avoid rounding errors and unexpected frequency > being set with clk_set_rate(), due to recalc_rate returning > different values than the PLL rate specified in the > exynos5420_epll_24mhz_tbl table. E.g. this prevents a case > where two consecutive clk_set_rate() calls with same argument > result in different PLL output frequency. > > The PLL output frequencies have been calculated with formula: > > f = fxtal * (M * 2^16 + K) / (P * 2^S) / 2^16 > > where fxtal = 24000000. > > Fixes: 9842452acd ("clk: samsung: exynos542x: Add EPLL rate table") > Signed-off-by: Sylwester Nawrocki<s.nawrocki@samsung.com> Stephen, Mike, Could you apply this patch directly for v4.12-rcX? It fixes code added in v4.12.
On 07/31, Sylwester Nawrocki wrote: > On 07/21/2017 01:19 PM, Sylwester Nawrocki wrote: > >This patch fixes values of the EPLL K coefficient and changes > >the EPLL output frequency values to match exactly what is > >possible to achieve with given M, P, S, K coefficients. > >This allows to avoid rounding errors and unexpected frequency > >being set with clk_set_rate(), due to recalc_rate returning > >different values than the PLL rate specified in the > >exynos5420_epll_24mhz_tbl table. E.g. this prevents a case > >where two consecutive clk_set_rate() calls with same argument > >result in different PLL output frequency. > > > >The PLL output frequencies have been calculated with formula: > > > >f = fxtal * (M * 2^16 + K) / (P * 2^S) / 2^16 > > > >where fxtal = 24000000. > > > >Fixes: 9842452acd ("clk: samsung: exynos542x: Add EPLL rate table") > >Signed-off-by: Sylwester Nawrocki<s.nawrocki@samsung.com> > > Stephen, Mike, > > Could you apply this patch directly for v4.12-rcX? > It fixes code added in v4.12. > You mean v4.13? Sure.
On 07/21, Sylwester Nawrocki wrote: > This patch fixes values of the EPLL K coefficient and changes > the EPLL output frequency values to match exactly what is > possible to achieve with given M, P, S, K coefficients. > This allows to avoid rounding errors and unexpected frequency > being set with clk_set_rate(), due to recalc_rate returning > different values than the PLL rate specified in the > exynos5420_epll_24mhz_tbl table. E.g. this prevents a case > where two consecutive clk_set_rate() calls with same argument > result in different PLL output frequency. > > The PLL output frequencies have been calculated with formula: > > f = fxtal * (M * 2^16 + K) / (P * 2^S) / 2^16 > > where fxtal = 24000000. > > Fixes: 9842452acd ("clk: samsung: exynos542x: Add EPLL rate table") > Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> > --- Applied to clk-fixes
On 07/31/2017 10:17 PM, Stephen Boyd wrote: > On 07/31, Sylwester Nawrocki wrote: >> On 07/21/2017 01:19 PM, Sylwester Nawrocki wrote: >>> This patch fixes values of the EPLL K coefficient and changes >>> the EPLL output frequency values to match exactly what is >>> possible to achieve with given M, P, S, K coefficients. >>> This allows to avoid rounding errors and unexpected frequency >>> being set with clk_set_rate(), due to recalc_rate returning >>> different values than the PLL rate specified in the >>> exynos5420_epll_24mhz_tbl table. E.g. this prevents a case >>> where two consecutive clk_set_rate() calls with same argument >>> result in different PLL output frequency. >>> >>> The PLL output frequencies have been calculated with formula: >>> >>> f = fxtal * (M * 2^16 + K) / (P * 2^S) / 2^16 >>> >>> where fxtal = 24000000. >>> >>> Fixes: 9842452acd ("clk: samsung: exynos542x: Add EPLL rate table") >>> Signed-off-by: Sylwester Nawrocki<s.nawrocki@samsung.com> >> Stephen, Mike, >> >> Could you apply this patch directly for v4.12-rcX? >> It fixes code added in v4.12. >> > You mean v4.13? Sure. Yes, apologies for confusing these numbers. Thanks for taking care of the patch.
diff --git a/drivers/clk/samsung/clk-exynos5420.c b/drivers/clk/samsung/clk-exynos5420.c index 0748a0b..9a6476a 100644 --- a/drivers/clk/samsung/clk-exynos5420.c +++ b/drivers/clk/samsung/clk-exynos5420.c @@ -1283,16 +1283,16 @@ static void __init exynos5420_clk_sleep_init(void) {} static const struct samsung_pll_rate_table exynos5420_epll_24mhz_tbl[] = { PLL_36XX_RATE(600000000U, 100, 2, 1, 0), PLL_36XX_RATE(400000000U, 200, 3, 2, 0), - PLL_36XX_RATE(393216000U, 197, 3, 2, 25690), - PLL_36XX_RATE(361267200U, 301, 5, 2, 3671), + PLL_36XX_RATE(393216003U, 197, 3, 2, -25690), + PLL_36XX_RATE(361267218U, 301, 5, 2, 3671), PLL_36XX_RATE(200000000U, 200, 3, 3, 0), - PLL_36XX_RATE(196608000U, 197, 3, 3, -25690), - PLL_36XX_RATE(180633600U, 301, 5, 3, 3671), - PLL_36XX_RATE(131072000U, 131, 3, 3, 4719), + PLL_36XX_RATE(196608001U, 197, 3, 3, -25690), + PLL_36XX_RATE(180633609U, 301, 5, 3, 3671), + PLL_36XX_RATE(131072006U, 131, 3, 3, 4719), PLL_36XX_RATE(100000000U, 200, 3, 4, 0), - PLL_36XX_RATE(65536000U, 131, 3, 4, 4719), - PLL_36XX_RATE(49152000U, 197, 3, 5, 25690), - PLL_36XX_RATE(32768000U, 131, 3, 5, 4719), + PLL_36XX_RATE( 65536003U, 131, 3, 4, 4719), + PLL_36XX_RATE( 49152000U, 197, 3, 5, -25690), + PLL_36XX_RATE( 32768001U, 131, 3, 5, 4719), }; static struct samsung_pll_clock exynos5x_plls[nr_plls] __initdata = {
This patch fixes values of the EPLL K coefficient and changes the EPLL output frequency values to match exactly what is possible to achieve with given M, P, S, K coefficients. This allows to avoid rounding errors and unexpected frequency being set with clk_set_rate(), due to recalc_rate returning different values than the PLL rate specified in the exynos5420_epll_24mhz_tbl table. E.g. this prevents a case where two consecutive clk_set_rate() calls with same argument result in different PLL output frequency. The PLL output frequencies have been calculated with formula: f = fxtal * (M * 2^16 + K) / (P * 2^S) / 2^16 where fxtal = 24000000. Fixes: 9842452acd ("clk: samsung: exynos542x: Add EPLL rate table") Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> --- drivers/clk/samsung/clk-exynos5420.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-)