diff mbox

[2/3] clk: samsung: Add CLK_SET_RATE_PARENT to some AUDSS CLK CON clocks

Message ID 1500655004-29816-2-git-send-email-s.nawrocki@samsung.com (mailing list archive)
State Not Applicable
Headers show

Commit Message

This allows clk rate propagation up to the clock tree so EPLL
can be reprogrammed indirectly when setting rate of the Audio
Subsystem clocks.
The advantage is that sound machine driver can operate only
on the leaf clocks rather than explicitly re-configuring
the root clock (EPLL).

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
---
 drivers/clk/samsung/clk-exynos-audss.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

Comments

On 07/21/2017 06:36 PM, Sylwester Nawrocki wrote:
> This allows clk rate propagation up to the clock tree so EPLL
> can be reprogrammed indirectly when setting rate of the Audio
> Subsystem clocks.
> The advantage is that sound machine driver can operate only
> on the leaf clocks rather than explicitly re-configuring
> the root clock (EPLL).
> 
> Signed-off-by: Sylwester Nawrocki<s.nawrocki@samsung.com>

I've applied patches 1..3 to my tree.
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/drivers/clk/samsung/clk-exynos-audss.c b/drivers/clk/samsung/clk-exynos-audss.c
index 1fab56f..b117783 100644
--- a/drivers/clk/samsung/clk-exynos-audss.c
+++ b/drivers/clk/samsung/clk-exynos-audss.c
@@ -180,7 +180,7 @@  static int exynos_audss_clk_probe(struct platform_device *pdev)
 	}
 	clk_table[EXYNOS_MOUT_AUDSS] = clk_hw_register_mux(NULL, "mout_audss",
 				mout_audss_p, ARRAY_SIZE(mout_audss_p),
-				CLK_SET_RATE_NO_REPARENT,
+				CLK_SET_RATE_NO_REPARENT | CLK_SET_RATE_PARENT,
 				reg_base + ASS_CLK_SRC, 0, 1, 0, &lock);
 
 	cdclk = devm_clk_get(&pdev->dev, "cdclk");
@@ -195,11 +195,11 @@  static int exynos_audss_clk_probe(struct platform_device *pdev)
 				reg_base + ASS_CLK_SRC, 2, 2, 0, &lock);
 
 	clk_table[EXYNOS_DOUT_SRP] = clk_hw_register_divider(NULL, "dout_srp",
-				"mout_audss", 0, reg_base + ASS_CLK_DIV, 0, 4,
-				0, &lock);
+				"mout_audss", CLK_SET_RATE_PARENT,
+				reg_base + ASS_CLK_DIV, 0, 4, 0, &lock);
 
 	clk_table[EXYNOS_DOUT_AUD_BUS] = clk_hw_register_divider(NULL,
-				"dout_aud_bus", "dout_srp", 0,
+				"dout_aud_bus", "dout_srp", CLK_SET_RATE_PARENT,
 				reg_base + ASS_CLK_DIV, 4, 4, 0, &lock);
 
 	clk_table[EXYNOS_DOUT_I2S] = clk_hw_register_divider(NULL, "dout_i2s",