| Message ID | 1515484746-10656-2-git-send-email-cw00.choi@samsung.com (mailing list archive) |
|---|---|
| State | Not Applicable |
| Headers | show |
On Tue, Jan 9, 2018 at 8:58 AM, Chanwoo Choi <cw00.choi@samsung.com> wrote: > This patch adds the CLK_IS_CRITICAL and CLK_IGNORE_UNUSED flag > to some clocks in order to avoid the hang-out in the suspend mode. > > Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> > Cc: Tomasz Figa <tomasz.figa@gmail.com> > Cc: Michael Turquette <mturquette@baylibre.com> > Cc: Stephen Boyd <sboyd@codeaurora.org> > Cc: linux-clk@vger.kernel.org > --- > drivers/clk/samsung/clk-exynos5433.c | 22 +++++++++++----------- > 1 file changed, 11 insertions(+), 11 deletions(-) > > diff --git a/drivers/clk/samsung/clk-exynos5433.c b/drivers/clk/samsung/clk-exynos5433.c > index db270908037a..3dc53cd0c730 100644 > --- a/drivers/clk/samsung/clk-exynos5433.c > +++ b/drivers/clk/samsung/clk-exynos5433.c > @@ -583,25 +583,25 @@ > CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, 0), > GATE(CLK_ACLK_CAM1_333, "aclk_cam1_333", "div_aclk_cam1_333", > ENABLE_ACLK_TOP, 13, > - CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, 0), > + CLK_SET_RATE_PARENT | CLK_IS_CRITICAL, 0), > GATE(CLK_ACLK_CAM1_400, "aclk_cam1_400", "div_aclk_cam1_400", > ENABLE_ACLK_TOP, 12, > CLK_SET_RATE_PARENT | CLK_IS_CRITICAL, 0), > GATE(CLK_ACLK_CAM1_552, "aclk_cam1_552", "div_aclk_cam1_552", > ENABLE_ACLK_TOP, 11, > - CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, 0), > + CLK_SET_RATE_PARENT | CLK_IS_CRITICAL, 0), > GATE(CLK_ACLK_CAM0_333, "aclk_cam0_333", "div_aclk_cam0_333", > ENABLE_ACLK_TOP, 10, > - CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, 0), > + CLK_SET_RATE_PARENT | CLK_IS_CRITICAL, 0), > GATE(CLK_ACLK_CAM0_400, "aclk_cam0_400", "div_aclk_cam0_400", > ENABLE_ACLK_TOP, 9, > CLK_SET_RATE_PARENT | CLK_IS_CRITICAL, 0), > GATE(CLK_ACLK_CAM0_552, "aclk_cam0_552", "div_aclk_cam0_552", > ENABLE_ACLK_TOP, 8, > - CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, 0), > + CLK_SET_RATE_PARENT | CLK_IS_CRITICAL, 0), > GATE(CLK_ACLK_ISP_DIS_400, "aclk_isp_dis_400", "div_aclk_isp_dis_400", > ENABLE_ACLK_TOP, 7, > - CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, 0), > + CLK_SET_RATE_PARENT | CLK_IS_CRITICAL, 0), > GATE(CLK_ACLK_ISP_400, "aclk_isp_400", "div_aclk_isp_400", > ENABLE_ACLK_TOP, 6, > CLK_SET_RATE_PARENT | CLK_IS_CRITICAL, 0), > @@ -624,11 +624,11 @@ > > /* ENABLE_SCLK_TOP_CAM1 */ > GATE(CLK_SCLK_ISP_SENSOR2, "sclk_isp_sensor2", "div_sclk_isp_sensor2_b", > - ENABLE_SCLK_TOP_CAM1, 7, 0, 0), > + ENABLE_SCLK_TOP_CAM1, 7, CLK_IGNORE_UNUSED, 0), > GATE(CLK_SCLK_ISP_SENSOR1, "sclk_isp_sensor1", "div_sclk_isp_sensor1_b", > ENABLE_SCLK_TOP_CAM1, 6, 0, 0), > GATE(CLK_SCLK_ISP_SENSOR0, "sclk_isp_sensor0", "div_sclk_isp_sensor0_b", > - ENABLE_SCLK_TOP_CAM1, 5, 0, 0), > + ENABLE_SCLK_TOP_CAM1, 5, CLK_IGNORE_UNUSED, 0), Marking this and few others related to ISP as ignore_unused or is_critical looks like a hacky workaround for wrong topology or missing clock users. The real cause should be fixed instead marking all the clocks as critical or ignore_unused. Best regards, Krzysztof > GATE(CLK_SCLK_ISP_MCTADC_CAM1, "sclk_isp_mctadc_cam1", "oscclk", > ENABLE_SCLK_TOP_CAM1, 4, 0, 0), > GATE(CLK_SCLK_ISP_UART_CAM1, "sclk_isp_uart_cam1", "div_sclk_isp_uart", > @@ -636,7 +636,7 @@ > GATE(CLK_SCLK_ISP_SPI1_CAM1, "sclk_isp_spi1_cam1", "div_sclk_isp_spi1_b", > ENABLE_SCLK_TOP_CAM1, 1, 0, 0), > GATE(CLK_SCLK_ISP_SPI0_CAM1, "sclk_isp_spi0_cam1", "div_sclk_isp_spi0_b", > - ENABLE_SCLK_TOP_CAM1, 0, 0, 0), > + ENABLE_SCLK_TOP_CAM1, 0, CLK_IGNORE_UNUSED, 0), > > /* ENABLE_SCLK_TOP_DISP */ > GATE(CLK_SCLK_HDMI_SPDIF_DISP, "sclk_hdmi_spdif_disp", > @@ -654,7 +654,7 @@ > ENABLE_SCLK_TOP_FSYS, 4, CLK_SET_RATE_PARENT, 0), > GATE(CLK_SCLK_UFSUNIPRO_FSYS, "sclk_ufsunipro_fsys", > "div_sclk_ufsunipro", ENABLE_SCLK_TOP_FSYS, > - 3, CLK_SET_RATE_PARENT, 0), > + 3, CLK_SET_RATE_PARENT | CLK_IS_CRITICAL, 0), > GATE(CLK_SCLK_USBHOST30_FSYS, "sclk_usbhost30_fsys", > "div_sclk_usbhost30", ENABLE_SCLK_TOP_FSYS, > 1, CLK_SET_RATE_PARENT, 0), > @@ -2982,7 +2982,7 @@ static void __init exynos5433_cmu_peris_init(struct device_node *np) > GATE(CLK_PCLK_AUD_SLIMBUS, "pclk_aud_slimbus", "div_aclk_aud", > ENABLE_PCLK_AUD, 6, 0, 0), > GATE(CLK_PCLK_AUD_UART, "pclk_aud_uart", "div_aclk_aud", > - ENABLE_PCLK_AUD, 5, 0, 0), > + ENABLE_PCLK_AUD, 5, CLK_IS_CRITICAL, 0), > GATE(CLK_PCLK_AUD_PCM, "pclk_aud_pcm", "div_aclk_aud", > ENABLE_PCLK_AUD, 4, 0, 0), > GATE(CLK_PCLK_AUD_I2S, "pclk_aud_i2s", "div_aclk_aud", > @@ -3008,7 +3008,7 @@ static void __init exynos5433_cmu_peris_init(struct device_node *np) > GATE(CLK_SCLK_AUD_SLIMBUS, "sclk_aud_slimbus", "div_sclk_aud_slimbus", > ENABLE_SCLK_AUD1, 4, 0, 0), > GATE(CLK_SCLK_AUD_UART, "sclk_aud_uart", "div_sclk_aud_uart", > - ENABLE_SCLK_AUD1, 3, CLK_IGNORE_UNUSED, 0), > + ENABLE_SCLK_AUD1, 3, CLK_IS_CRITICAL, 0), > GATE(CLK_SCLK_AUD_PCM, "sclk_aud_pcm", "div_sclk_aud_pcm", > ENABLE_SCLK_AUD1, 2, 0, 0), > GATE(CLK_SCLK_I2S_BCLK, "sclk_i2s_bclk", "ioclk_i2s_bclk", > -- > 1.9.1 > -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 2018년 01월 09일 20:44, Krzysztof Kozlowski wrote: > On Tue, Jan 9, 2018 at 8:58 AM, Chanwoo Choi <cw00.choi@samsung.com> wrote: >> This patch adds the CLK_IS_CRITICAL and CLK_IGNORE_UNUSED flag >> to some clocks in order to avoid the hang-out in the suspend mode. >> >> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> >> Cc: Tomasz Figa <tomasz.figa@gmail.com> >> Cc: Michael Turquette <mturquette@baylibre.com> >> Cc: Stephen Boyd <sboyd@codeaurora.org> >> Cc: linux-clk@vger.kernel.org >> --- >> drivers/clk/samsung/clk-exynos5433.c | 22 +++++++++++----------- >> 1 file changed, 11 insertions(+), 11 deletions(-) >> >> diff --git a/drivers/clk/samsung/clk-exynos5433.c b/drivers/clk/samsung/clk-exynos5433.c >> index db270908037a..3dc53cd0c730 100644 >> --- a/drivers/clk/samsung/clk-exynos5433.c >> +++ b/drivers/clk/samsung/clk-exynos5433.c >> @@ -583,25 +583,25 @@ >> CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, 0), >> GATE(CLK_ACLK_CAM1_333, "aclk_cam1_333", "div_aclk_cam1_333", >> ENABLE_ACLK_TOP, 13, >> - CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, 0), >> + CLK_SET_RATE_PARENT | CLK_IS_CRITICAL, 0), >> GATE(CLK_ACLK_CAM1_400, "aclk_cam1_400", "div_aclk_cam1_400", >> ENABLE_ACLK_TOP, 12, >> CLK_SET_RATE_PARENT | CLK_IS_CRITICAL, 0), >> GATE(CLK_ACLK_CAM1_552, "aclk_cam1_552", "div_aclk_cam1_552", >> ENABLE_ACLK_TOP, 11, >> - CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, 0), >> + CLK_SET_RATE_PARENT | CLK_IS_CRITICAL, 0), >> GATE(CLK_ACLK_CAM0_333, "aclk_cam0_333", "div_aclk_cam0_333", >> ENABLE_ACLK_TOP, 10, >> - CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, 0), >> + CLK_SET_RATE_PARENT | CLK_IS_CRITICAL, 0), >> GATE(CLK_ACLK_CAM0_400, "aclk_cam0_400", "div_aclk_cam0_400", >> ENABLE_ACLK_TOP, 9, >> CLK_SET_RATE_PARENT | CLK_IS_CRITICAL, 0), >> GATE(CLK_ACLK_CAM0_552, "aclk_cam0_552", "div_aclk_cam0_552", >> ENABLE_ACLK_TOP, 8, >> - CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, 0), >> + CLK_SET_RATE_PARENT | CLK_IS_CRITICAL, 0), >> GATE(CLK_ACLK_ISP_DIS_400, "aclk_isp_dis_400", "div_aclk_isp_dis_400", >> ENABLE_ACLK_TOP, 7, >> - CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, 0), >> + CLK_SET_RATE_PARENT | CLK_IS_CRITICAL, 0), >> GATE(CLK_ACLK_ISP_400, "aclk_isp_400", "div_aclk_isp_400", >> ENABLE_ACLK_TOP, 6, >> CLK_SET_RATE_PARENT | CLK_IS_CRITICAL, 0), >> @@ -624,11 +624,11 @@ >> >> /* ENABLE_SCLK_TOP_CAM1 */ >> GATE(CLK_SCLK_ISP_SENSOR2, "sclk_isp_sensor2", "div_sclk_isp_sensor2_b", >> - ENABLE_SCLK_TOP_CAM1, 7, 0, 0), >> + ENABLE_SCLK_TOP_CAM1, 7, CLK_IGNORE_UNUSED, 0), >> GATE(CLK_SCLK_ISP_SENSOR1, "sclk_isp_sensor1", "div_sclk_isp_sensor1_b", >> ENABLE_SCLK_TOP_CAM1, 6, 0, 0), >> GATE(CLK_SCLK_ISP_SENSOR0, "sclk_isp_sensor0", "div_sclk_isp_sensor0_b", >> - ENABLE_SCLK_TOP_CAM1, 5, 0, 0), >> + ENABLE_SCLK_TOP_CAM1, 5, CLK_IGNORE_UNUSED, 0), > > Marking this and few others related to ISP as ignore_unused or > is_critical looks like a hacky workaround for wrong topology or > missing clock users. The real cause should be fixed instead marking > all the clocks as critical or ignore_unused. I'm sorry. It is my mistake. When I tested the suspend again, following three clocks need CLK_IS_CRITICAL flag. - CLK_ACLK_CAM0_552 / CLK_SCLK_UFSUNIPRO_FSYS : there are not clk consumer until now. - CLK_SCLK_AUD_UART is for serial_3. : There are no problem for the clocks of other serial port. Only this clock must need to enable it always on. If we have to handle CLK_SCLK_AUD_UART on drivers/tty/serial/samsung.c, we need to pass the 'serial port information and Exynos info'. So, If possible, adding the CLK_IS_CRITICAL flag to CLK_SCLK_AUD_UART is simple. > > Best regards, > Krzysztof > >> GATE(CLK_SCLK_ISP_MCTADC_CAM1, "sclk_isp_mctadc_cam1", "oscclk", >> ENABLE_SCLK_TOP_CAM1, 4, 0, 0), >> GATE(CLK_SCLK_ISP_UART_CAM1, "sclk_isp_uart_cam1", "div_sclk_isp_uart", >> @@ -636,7 +636,7 @@ >> GATE(CLK_SCLK_ISP_SPI1_CAM1, "sclk_isp_spi1_cam1", "div_sclk_isp_spi1_b", >> ENABLE_SCLK_TOP_CAM1, 1, 0, 0), >> GATE(CLK_SCLK_ISP_SPI0_CAM1, "sclk_isp_spi0_cam1", "div_sclk_isp_spi0_b", >> - ENABLE_SCLK_TOP_CAM1, 0, 0, 0), >> + ENABLE_SCLK_TOP_CAM1, 0, CLK_IGNORE_UNUSED, 0), >> >> /* ENABLE_SCLK_TOP_DISP */ >> GATE(CLK_SCLK_HDMI_SPDIF_DISP, "sclk_hdmi_spdif_disp", >> @@ -654,7 +654,7 @@ >> ENABLE_SCLK_TOP_FSYS, 4, CLK_SET_RATE_PARENT, 0), >> GATE(CLK_SCLK_UFSUNIPRO_FSYS, "sclk_ufsunipro_fsys", >> "div_sclk_ufsunipro", ENABLE_SCLK_TOP_FSYS, >> - 3, CLK_SET_RATE_PARENT, 0), >> + 3, CLK_SET_RATE_PARENT | CLK_IS_CRITICAL, 0), >> GATE(CLK_SCLK_USBHOST30_FSYS, "sclk_usbhost30_fsys", >> "div_sclk_usbhost30", ENABLE_SCLK_TOP_FSYS, >> 1, CLK_SET_RATE_PARENT, 0), >> @@ -2982,7 +2982,7 @@ static void __init exynos5433_cmu_peris_init(struct device_node *np) >> GATE(CLK_PCLK_AUD_SLIMBUS, "pclk_aud_slimbus", "div_aclk_aud", >> ENABLE_PCLK_AUD, 6, 0, 0), >> GATE(CLK_PCLK_AUD_UART, "pclk_aud_uart", "div_aclk_aud", >> - ENABLE_PCLK_AUD, 5, 0, 0), >> + ENABLE_PCLK_AUD, 5, CLK_IS_CRITICAL, 0), >> GATE(CLK_PCLK_AUD_PCM, "pclk_aud_pcm", "div_aclk_aud", >> ENABLE_PCLK_AUD, 4, 0, 0), >> GATE(CLK_PCLK_AUD_I2S, "pclk_aud_i2s", "div_aclk_aud", >> @@ -3008,7 +3008,7 @@ static void __init exynos5433_cmu_peris_init(struct device_node *np) >> GATE(CLK_SCLK_AUD_SLIMBUS, "sclk_aud_slimbus", "div_sclk_aud_slimbus", >> ENABLE_SCLK_AUD1, 4, 0, 0), >> GATE(CLK_SCLK_AUD_UART, "sclk_aud_uart", "div_sclk_aud_uart", >> - ENABLE_SCLK_AUD1, 3, CLK_IGNORE_UNUSED, 0), >> + ENABLE_SCLK_AUD1, 3, CLK_IS_CRITICAL, 0), >> GATE(CLK_SCLK_AUD_PCM, "sclk_aud_pcm", "div_sclk_aud_pcm", >> ENABLE_SCLK_AUD1, 2, 0, 0), >> GATE(CLK_SCLK_I2S_BCLK, "sclk_i2s_bclk", "ioclk_i2s_bclk", >> -- >> 1.9.1 >> > -- > To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html > > >
Hi Krzysztof and Chanwoo, On 2018-01-09 12:44, Krzysztof Kozlowski wrote: > On Tue, Jan 9, 2018 at 8:58 AM, Chanwoo Choi <cw00.choi@samsung.com> wrote: >> This patch adds the CLK_IS_CRITICAL and CLK_IGNORE_UNUSED flag >> to some clocks in order to avoid the hang-out in the suspend mode. >> >> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> >> Cc: Tomasz Figa <tomasz.figa@gmail.com> >> Cc: Michael Turquette <mturquette@baylibre.com> >> Cc: Stephen Boyd <sboyd@codeaurora.org> >> Cc: linux-clk@vger.kernel.org >> --- >> drivers/clk/samsung/clk-exynos5433.c | 22 +++++++++++----------- >> 1 file changed, 11 insertions(+), 11 deletions(-) >> >> diff --git a/drivers/clk/samsung/clk-exynos5433.c b/drivers/clk/samsung/clk-exynos5433.c >> index db270908037a..3dc53cd0c730 100644 >> --- a/drivers/clk/samsung/clk-exynos5433.c >> +++ b/drivers/clk/samsung/clk-exynos5433.c >> @@ -583,25 +583,25 @@ >> CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, 0), >> GATE(CLK_ACLK_CAM1_333, "aclk_cam1_333", "div_aclk_cam1_333", >> ENABLE_ACLK_TOP, 13, >> - CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, 0), >> + CLK_SET_RATE_PARENT | CLK_IS_CRITICAL, 0), >> GATE(CLK_ACLK_CAM1_400, "aclk_cam1_400", "div_aclk_cam1_400", >> ENABLE_ACLK_TOP, 12, >> CLK_SET_RATE_PARENT | CLK_IS_CRITICAL, 0), >> GATE(CLK_ACLK_CAM1_552, "aclk_cam1_552", "div_aclk_cam1_552", >> ENABLE_ACLK_TOP, 11, >> - CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, 0), >> + CLK_SET_RATE_PARENT | CLK_IS_CRITICAL, 0), >> GATE(CLK_ACLK_CAM0_333, "aclk_cam0_333", "div_aclk_cam0_333", >> ENABLE_ACLK_TOP, 10, >> - CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, 0), >> + CLK_SET_RATE_PARENT | CLK_IS_CRITICAL, 0), >> GATE(CLK_ACLK_CAM0_400, "aclk_cam0_400", "div_aclk_cam0_400", >> ENABLE_ACLK_TOP, 9, >> CLK_SET_RATE_PARENT | CLK_IS_CRITICAL, 0), >> GATE(CLK_ACLK_CAM0_552, "aclk_cam0_552", "div_aclk_cam0_552", >> ENABLE_ACLK_TOP, 8, >> - CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, 0), >> + CLK_SET_RATE_PARENT | CLK_IS_CRITICAL, 0), >> GATE(CLK_ACLK_ISP_DIS_400, "aclk_isp_dis_400", "div_aclk_isp_dis_400", >> ENABLE_ACLK_TOP, 7, >> - CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, 0), >> + CLK_SET_RATE_PARENT | CLK_IS_CRITICAL, 0), >> GATE(CLK_ACLK_ISP_400, "aclk_isp_400", "div_aclk_isp_400", >> ENABLE_ACLK_TOP, 6, >> CLK_SET_RATE_PARENT | CLK_IS_CRITICAL, 0), >> @@ -624,11 +624,11 @@ >> >> /* ENABLE_SCLK_TOP_CAM1 */ >> GATE(CLK_SCLK_ISP_SENSOR2, "sclk_isp_sensor2", "div_sclk_isp_sensor2_b", >> - ENABLE_SCLK_TOP_CAM1, 7, 0, 0), >> + ENABLE_SCLK_TOP_CAM1, 7, CLK_IGNORE_UNUSED, 0), >> GATE(CLK_SCLK_ISP_SENSOR1, "sclk_isp_sensor1", "div_sclk_isp_sensor1_b", >> ENABLE_SCLK_TOP_CAM1, 6, 0, 0), >> GATE(CLK_SCLK_ISP_SENSOR0, "sclk_isp_sensor0", "div_sclk_isp_sensor0_b", >> - ENABLE_SCLK_TOP_CAM1, 5, 0, 0), >> + ENABLE_SCLK_TOP_CAM1, 5, CLK_IGNORE_UNUSED, 0), > Marking this and few others related to ISP as ignore_unused or > is_critical looks like a hacky workaround for wrong topology or > missing clock users. The real cause should be fixed instead marking > all the clocks as critical or ignore_unused. I think that instead of using CLK_IGNORE_UNUSED / CLK_IS_CRITICAL workaround, exynos5433 clk driver should simply use *_suspend_regs infrastructure. See suspend_regs entry in samsung_cmu_info and similar solution in exynos5420.c clk driver (see exynos5420_clk_suspend function). There is no point guessing why those clocks have to be enabled for proper suspend cycle and which client driver should handle it. The documentation misses such information at all. Just handle it in clk driver internally without exposing it to clock clients. We already do this in case of other Exynos SoCs. > > Best regards, > Krzysztof > >> GATE(CLK_SCLK_ISP_MCTADC_CAM1, "sclk_isp_mctadc_cam1", "oscclk", >> ENABLE_SCLK_TOP_CAM1, 4, 0, 0), >> GATE(CLK_SCLK_ISP_UART_CAM1, "sclk_isp_uart_cam1", "div_sclk_isp_uart", >> @@ -636,7 +636,7 @@ >> GATE(CLK_SCLK_ISP_SPI1_CAM1, "sclk_isp_spi1_cam1", "div_sclk_isp_spi1_b", >> ENABLE_SCLK_TOP_CAM1, 1, 0, 0), >> GATE(CLK_SCLK_ISP_SPI0_CAM1, "sclk_isp_spi0_cam1", "div_sclk_isp_spi0_b", >> - ENABLE_SCLK_TOP_CAM1, 0, 0, 0), >> + ENABLE_SCLK_TOP_CAM1, 0, CLK_IGNORE_UNUSED, 0), >> >> /* ENABLE_SCLK_TOP_DISP */ >> GATE(CLK_SCLK_HDMI_SPDIF_DISP, "sclk_hdmi_spdif_disp", >> @@ -654,7 +654,7 @@ >> ENABLE_SCLK_TOP_FSYS, 4, CLK_SET_RATE_PARENT, 0), >> GATE(CLK_SCLK_UFSUNIPRO_FSYS, "sclk_ufsunipro_fsys", >> "div_sclk_ufsunipro", ENABLE_SCLK_TOP_FSYS, >> - 3, CLK_SET_RATE_PARENT, 0), >> + 3, CLK_SET_RATE_PARENT | CLK_IS_CRITICAL, 0), >> GATE(CLK_SCLK_USBHOST30_FSYS, "sclk_usbhost30_fsys", >> "div_sclk_usbhost30", ENABLE_SCLK_TOP_FSYS, >> 1, CLK_SET_RATE_PARENT, 0), >> @@ -2982,7 +2982,7 @@ static void __init exynos5433_cmu_peris_init(struct device_node *np) >> GATE(CLK_PCLK_AUD_SLIMBUS, "pclk_aud_slimbus", "div_aclk_aud", >> ENABLE_PCLK_AUD, 6, 0, 0), >> GATE(CLK_PCLK_AUD_UART, "pclk_aud_uart", "div_aclk_aud", >> - ENABLE_PCLK_AUD, 5, 0, 0), >> + ENABLE_PCLK_AUD, 5, CLK_IS_CRITICAL, 0), >> GATE(CLK_PCLK_AUD_PCM, "pclk_aud_pcm", "div_aclk_aud", >> ENABLE_PCLK_AUD, 4, 0, 0), >> GATE(CLK_PCLK_AUD_I2S, "pclk_aud_i2s", "div_aclk_aud", >> @@ -3008,7 +3008,7 @@ static void __init exynos5433_cmu_peris_init(struct device_node *np) >> GATE(CLK_SCLK_AUD_SLIMBUS, "sclk_aud_slimbus", "div_sclk_aud_slimbus", >> ENABLE_SCLK_AUD1, 4, 0, 0), >> GATE(CLK_SCLK_AUD_UART, "sclk_aud_uart", "div_sclk_aud_uart", >> - ENABLE_SCLK_AUD1, 3, CLK_IGNORE_UNUSED, 0), >> + ENABLE_SCLK_AUD1, 3, CLK_IS_CRITICAL, 0), >> GATE(CLK_SCLK_AUD_PCM, "sclk_aud_pcm", "div_sclk_aud_pcm", >> ENABLE_SCLK_AUD1, 2, 0, 0), >> GATE(CLK_SCLK_I2S_BCLK, "sclk_i2s_bclk", "ioclk_i2s_bclk", >> -- >> 1.9.1 >> > > Best regards
diff --git a/drivers/clk/samsung/clk-exynos5433.c b/drivers/clk/samsung/clk-exynos5433.c index db270908037a..3dc53cd0c730 100644 --- a/drivers/clk/samsung/clk-exynos5433.c +++ b/drivers/clk/samsung/clk-exynos5433.c @@ -583,25 +583,25 @@ CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, 0), GATE(CLK_ACLK_CAM1_333, "aclk_cam1_333", "div_aclk_cam1_333", ENABLE_ACLK_TOP, 13, - CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, 0), + CLK_SET_RATE_PARENT | CLK_IS_CRITICAL, 0), GATE(CLK_ACLK_CAM1_400, "aclk_cam1_400", "div_aclk_cam1_400", ENABLE_ACLK_TOP, 12, CLK_SET_RATE_PARENT | CLK_IS_CRITICAL, 0), GATE(CLK_ACLK_CAM1_552, "aclk_cam1_552", "div_aclk_cam1_552", ENABLE_ACLK_TOP, 11, - CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, 0), + CLK_SET_RATE_PARENT | CLK_IS_CRITICAL, 0), GATE(CLK_ACLK_CAM0_333, "aclk_cam0_333", "div_aclk_cam0_333", ENABLE_ACLK_TOP, 10, - CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, 0), + CLK_SET_RATE_PARENT | CLK_IS_CRITICAL, 0), GATE(CLK_ACLK_CAM0_400, "aclk_cam0_400", "div_aclk_cam0_400", ENABLE_ACLK_TOP, 9, CLK_SET_RATE_PARENT | CLK_IS_CRITICAL, 0), GATE(CLK_ACLK_CAM0_552, "aclk_cam0_552", "div_aclk_cam0_552", ENABLE_ACLK_TOP, 8, - CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, 0), + CLK_SET_RATE_PARENT | CLK_IS_CRITICAL, 0), GATE(CLK_ACLK_ISP_DIS_400, "aclk_isp_dis_400", "div_aclk_isp_dis_400", ENABLE_ACLK_TOP, 7, - CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, 0), + CLK_SET_RATE_PARENT | CLK_IS_CRITICAL, 0), GATE(CLK_ACLK_ISP_400, "aclk_isp_400", "div_aclk_isp_400", ENABLE_ACLK_TOP, 6, CLK_SET_RATE_PARENT | CLK_IS_CRITICAL, 0), @@ -624,11 +624,11 @@ /* ENABLE_SCLK_TOP_CAM1 */ GATE(CLK_SCLK_ISP_SENSOR2, "sclk_isp_sensor2", "div_sclk_isp_sensor2_b", - ENABLE_SCLK_TOP_CAM1, 7, 0, 0), + ENABLE_SCLK_TOP_CAM1, 7, CLK_IGNORE_UNUSED, 0), GATE(CLK_SCLK_ISP_SENSOR1, "sclk_isp_sensor1", "div_sclk_isp_sensor1_b", ENABLE_SCLK_TOP_CAM1, 6, 0, 0), GATE(CLK_SCLK_ISP_SENSOR0, "sclk_isp_sensor0", "div_sclk_isp_sensor0_b", - ENABLE_SCLK_TOP_CAM1, 5, 0, 0), + ENABLE_SCLK_TOP_CAM1, 5, CLK_IGNORE_UNUSED, 0), GATE(CLK_SCLK_ISP_MCTADC_CAM1, "sclk_isp_mctadc_cam1", "oscclk", ENABLE_SCLK_TOP_CAM1, 4, 0, 0), GATE(CLK_SCLK_ISP_UART_CAM1, "sclk_isp_uart_cam1", "div_sclk_isp_uart", @@ -636,7 +636,7 @@ GATE(CLK_SCLK_ISP_SPI1_CAM1, "sclk_isp_spi1_cam1", "div_sclk_isp_spi1_b", ENABLE_SCLK_TOP_CAM1, 1, 0, 0), GATE(CLK_SCLK_ISP_SPI0_CAM1, "sclk_isp_spi0_cam1", "div_sclk_isp_spi0_b", - ENABLE_SCLK_TOP_CAM1, 0, 0, 0), + ENABLE_SCLK_TOP_CAM1, 0, CLK_IGNORE_UNUSED, 0), /* ENABLE_SCLK_TOP_DISP */ GATE(CLK_SCLK_HDMI_SPDIF_DISP, "sclk_hdmi_spdif_disp", @@ -654,7 +654,7 @@ ENABLE_SCLK_TOP_FSYS, 4, CLK_SET_RATE_PARENT, 0), GATE(CLK_SCLK_UFSUNIPRO_FSYS, "sclk_ufsunipro_fsys", "div_sclk_ufsunipro", ENABLE_SCLK_TOP_FSYS, - 3, CLK_SET_RATE_PARENT, 0), + 3, CLK_SET_RATE_PARENT | CLK_IS_CRITICAL, 0), GATE(CLK_SCLK_USBHOST30_FSYS, "sclk_usbhost30_fsys", "div_sclk_usbhost30", ENABLE_SCLK_TOP_FSYS, 1, CLK_SET_RATE_PARENT, 0), @@ -2982,7 +2982,7 @@ static void __init exynos5433_cmu_peris_init(struct device_node *np) GATE(CLK_PCLK_AUD_SLIMBUS, "pclk_aud_slimbus", "div_aclk_aud", ENABLE_PCLK_AUD, 6, 0, 0), GATE(CLK_PCLK_AUD_UART, "pclk_aud_uart", "div_aclk_aud", - ENABLE_PCLK_AUD, 5, 0, 0), + ENABLE_PCLK_AUD, 5, CLK_IS_CRITICAL, 0), GATE(CLK_PCLK_AUD_PCM, "pclk_aud_pcm", "div_aclk_aud", ENABLE_PCLK_AUD, 4, 0, 0), GATE(CLK_PCLK_AUD_I2S, "pclk_aud_i2s", "div_aclk_aud", @@ -3008,7 +3008,7 @@ static void __init exynos5433_cmu_peris_init(struct device_node *np) GATE(CLK_SCLK_AUD_SLIMBUS, "sclk_aud_slimbus", "div_sclk_aud_slimbus", ENABLE_SCLK_AUD1, 4, 0, 0), GATE(CLK_SCLK_AUD_UART, "sclk_aud_uart", "div_sclk_aud_uart", - ENABLE_SCLK_AUD1, 3, CLK_IGNORE_UNUSED, 0), + ENABLE_SCLK_AUD1, 3, CLK_IS_CRITICAL, 0), GATE(CLK_SCLK_AUD_PCM, "sclk_aud_pcm", "div_sclk_aud_pcm", ENABLE_SCLK_AUD1, 2, 0, 0), GATE(CLK_SCLK_I2S_BCLK, "sclk_i2s_bclk", "ioclk_i2s_bclk",
This patch adds the CLK_IS_CRITICAL and CLK_IGNORE_UNUSED flag to some clocks in order to avoid the hang-out in the suspend mode. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Cc: Tomasz Figa <tomasz.figa@gmail.com> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: linux-clk@vger.kernel.org --- drivers/clk/samsung/clk-exynos5433.c | 22 +++++++++++----------- 1 file changed, 11 insertions(+), 11 deletions(-) -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html