| Message ID | 1555289240-7735-2-git-send-email-inki.dae@samsung.com (mailing list archive) |
|---|---|
| State | Not Applicable |
| Headers | show |
| Series | drm/exynos: clean up logs | expand |
Hi Inki On Mon, Apr 15, 2019 at 09:47:19AM +0900, Inki Dae wrote: > This patch makes error messages to be printed out using DRM_ERROR > instead of DRM_INFO. > > Signed-off-by: Inki Dae <inki.dae@samsung.com> > --- > drivers/gpu/drm/exynos/exynos_drm_fimd.c | 6 +++--- > 1 file changed, 3 insertions(+), 3 deletions(-) > > diff --git a/drivers/gpu/drm/exynos/exynos_drm_fimd.c b/drivers/gpu/drm/exynos/exynos_drm_fimd.c > index 786a8ee..78427ec 100644 > --- a/drivers/gpu/drm/exynos/exynos_drm_fimd.c > +++ b/drivers/gpu/drm/exynos/exynos_drm_fimd.c > @@ -400,7 +400,7 @@ static int fimd_atomic_check(struct exynos_drm_crtc *crtc, > u32 clkdiv; > > if (mode->clock == 0) { > - DRM_INFO("Mode has zero clock value.\n"); > + DRM_ERROR("Mode has zero clock value.\n"); To give the logs a more precise info on where is comes from you could consider to use: DRM_DEV_ERROR(ctx->dev, "Mode has zero clock value.\n"); Likewise below. Sam
Hi Sam, 19. 4. 15. 오후 12:17에 Sam Ravnborg 이(가) 쓴 글: > Hi Inki > > On Mon, Apr 15, 2019 at 09:47:19AM +0900, Inki Dae wrote: >> This patch makes error messages to be printed out using DRM_ERROR >> instead of DRM_INFO. >> >> Signed-off-by: Inki Dae <inki.dae@samsung.com> >> --- >> drivers/gpu/drm/exynos/exynos_drm_fimd.c | 6 +++--- >> 1 file changed, 3 insertions(+), 3 deletions(-) >> >> diff --git a/drivers/gpu/drm/exynos/exynos_drm_fimd.c b/drivers/gpu/drm/exynos/exynos_drm_fimd.c >> index 786a8ee..78427ec 100644 >> --- a/drivers/gpu/drm/exynos/exynos_drm_fimd.c >> +++ b/drivers/gpu/drm/exynos/exynos_drm_fimd.c >> @@ -400,7 +400,7 @@ static int fimd_atomic_check(struct exynos_drm_crtc *crtc, >> u32 clkdiv; >> >> if (mode->clock == 0) { >> - DRM_INFO("Mode has zero clock value.\n"); >> + DRM_ERROR("Mode has zero clock value.\n"); > > To give the logs a more precise info on where is comes from you > could consider to use: > > DRM_DEV_ERROR(ctx->dev, "Mode has zero clock value.\n"); Thanks for comment and looks better. :) This patch corrects the use of log macro so I will make and push a new patch - which changes all existing DRM_ERROR macros to DRM_DEV_ERROR - on top of this patch series. Thanks, Inki Dae > > Likewise below. > > > Sam > >
On Mon, Apr 15, 2019 at 09:47:19AM +0900, Inki Dae wrote: > This patch makes error messages to be printed out using DRM_ERROR > instead of DRM_INFO. > > Signed-off-by: Inki Dae <inki.dae@samsung.com> > --- > drivers/gpu/drm/exynos/exynos_drm_fimd.c | 6 +++--- > 1 file changed, 3 insertions(+), 3 deletions(-) > > diff --git a/drivers/gpu/drm/exynos/exynos_drm_fimd.c b/drivers/gpu/drm/exynos/exynos_drm_fimd.c > index 786a8ee..78427ec 100644 > --- a/drivers/gpu/drm/exynos/exynos_drm_fimd.c > +++ b/drivers/gpu/drm/exynos/exynos_drm_fimd.c > @@ -400,7 +400,7 @@ static int fimd_atomic_check(struct exynos_drm_crtc *crtc, > u32 clkdiv; > > if (mode->clock == 0) { > - DRM_INFO("Mode has zero clock value.\n"); > + DRM_ERROR("Mode has zero clock value.\n"); > return -EINVAL; > } This seems like it should likely have been caught by drm_mode_convert_to_umode()->...->drm_mode_validate_basic(). > > @@ -416,7 +416,7 @@ static int fimd_atomic_check(struct exynos_drm_crtc *crtc, > > lcd_rate = clk_get_rate(ctx->lcd_clk); > if (2 * lcd_rate < ideal_clk) { > - DRM_INFO("sclk_fimd clock too low(%lu) for requested pixel clock(%lu)\n", > + DRM_ERROR("sclk_fimd clock too low(%lu) for requested pixel clock(%lu)\n", > lcd_rate, ideal_clk); These look like they could user triggerable, in which case they should be debug messages instead. > return -EINVAL; > } > @@ -424,7 +424,7 @@ static int fimd_atomic_check(struct exynos_drm_crtc *crtc, > /* Find the clock divider value that gets us closest to ideal_clk */ > clkdiv = DIV_ROUND_CLOSEST(lcd_rate, ideal_clk); > if (clkdiv >= 0x200) { > - DRM_INFO("requested pixel clock(%lu) too low\n", ideal_clk); > + DRM_ERROR("requested pixel clock(%lu) too low\n", ideal_clk); > return -EINVAL; > } > > -- > 2.7.4 > > _______________________________________________ > dri-devel mailing list > dri-devel@lists.freedesktop.org > https://lists.freedesktop.org/mailman/listinfo/dri-devel
diff --git a/drivers/gpu/drm/exynos/exynos_drm_fimd.c b/drivers/gpu/drm/exynos/exynos_drm_fimd.c index 786a8ee..78427ec 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_fimd.c +++ b/drivers/gpu/drm/exynos/exynos_drm_fimd.c @@ -400,7 +400,7 @@ static int fimd_atomic_check(struct exynos_drm_crtc *crtc, u32 clkdiv; if (mode->clock == 0) { - DRM_INFO("Mode has zero clock value.\n"); + DRM_ERROR("Mode has zero clock value.\n"); return -EINVAL; } @@ -416,7 +416,7 @@ static int fimd_atomic_check(struct exynos_drm_crtc *crtc, lcd_rate = clk_get_rate(ctx->lcd_clk); if (2 * lcd_rate < ideal_clk) { - DRM_INFO("sclk_fimd clock too low(%lu) for requested pixel clock(%lu)\n", + DRM_ERROR("sclk_fimd clock too low(%lu) for requested pixel clock(%lu)\n", lcd_rate, ideal_clk); return -EINVAL; } @@ -424,7 +424,7 @@ static int fimd_atomic_check(struct exynos_drm_crtc *crtc, /* Find the clock divider value that gets us closest to ideal_clk */ clkdiv = DIV_ROUND_CLOSEST(lcd_rate, ideal_clk); if (clkdiv >= 0x200) { - DRM_INFO("requested pixel clock(%lu) too low\n", ideal_clk); + DRM_ERROR("requested pixel clock(%lu) too low\n", ideal_clk); return -EINVAL; }
This patch makes error messages to be printed out using DRM_ERROR instead of DRM_INFO. Signed-off-by: Inki Dae <inki.dae@samsung.com> --- drivers/gpu/drm/exynos/exynos_drm_fimd.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)