| Message ID | 20171012201118.23570-6-dianders@chromium.org (mailing list archive) |
|---|---|
| State | Not Applicable |
| Headers | show |
Hi Doug On 2017/10/13 4:11, Douglas Anderson wrote: > The recent CTO timer introduced in commit 03de19212ea3 ("mmc: dw_mmc: > introduce timer for broken command transfer over scheme") was causing > observable problems due to race conditions. Previous patches have > fixed those race conditions. > > It can be observed that these same race conditions ought to be > theoretically possible with the DTO timer too though they are > massively less likely to happen because the data timeout is always set > to 0xffffff right now. That means even at a 200 MHz card clock we > were arming the DTO timer for 94 ms: > >>> (0xffffff * 1000. / 200000000) + 10 > 93.886075 > > We always also were setting the DTO timer _after_ starting the > transfer, unlike how the old code was seting the CTO timer. > > In any case, even though the DTO timer is much less likely to have > races, it still makes sense to add code to handle it _just in case_. > > Signed-off-by: Douglas Anderson <dianders@chromium.org> > --- > > Changes in v2: > - Cleanup the DTO timer new for v2 > > drivers/mmc/host/dw_mmc.c | 54 ++++++++++++++++++++++++++++++++++++++++++++--- > 1 file changed, 51 insertions(+), 3 deletions(-) > > diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c > index 6bc87b1385a9..bc0808615431 100644 > --- a/drivers/mmc/host/dw_mmc.c > +++ b/drivers/mmc/host/dw_mmc.c > @@ -1950,7 +1950,11 @@ static void dw_mci_set_drto(struct dw_mci *host) > /* add a bit spare time */ > drto_ms += 10; > > - mod_timer(&host->dto_timer, jiffies + msecs_to_jiffies(drto_ms)); > + spin_lock_irqsave(&host->irq_lock, irqflags); > + if (!test_bit(EVENT_DATA_COMPLETE, &host->pending_events)) > + mod_timer(&host->dto_timer, > + jiffies + msecs_to_jiffies(drto_ms)); > + spin_unlock_irqrestore(&host->irq_lock, irqflags); > } > > static bool dw_mci_clear_pending_cmd_complete(struct dw_mci *host) > @@ -1971,6 +1975,18 @@ static bool dw_mci_clear_pending_cmd_complete(struct dw_mci *host) > return true; > } > > +static bool dw_mci_clear_pending_data_complete(struct dw_mci *host) > +{ > + if (!test_bit(EVENT_DATA_COMPLETE, &host->pending_events)) > + return false; > + > + /* Extra paranoia just like dw_mci_clear_pending_cmd_complete() */ > + WARN_ON(del_timer_sync(&host->dto_timer)); > + clear_bit(EVENT_DATA_COMPLETE, &host->pending_events); > + > + return true; > +} > + > static void dw_mci_tasklet_func(unsigned long priv) > { > struct dw_mci *host = (struct dw_mci *)priv; > @@ -2112,8 +2128,7 @@ static void dw_mci_tasklet_func(unsigned long priv) > /* fall through */ > > case STATE_DATA_BUSY: > - if (!test_and_clear_bit(EVENT_DATA_COMPLETE, > - &host->pending_events)) { > + if (!dw_mci_clear_pending_data_complete(host)) { > /* > * If data error interrupt comes but data over > * interrupt doesn't come within the given time. > @@ -2683,6 +2698,8 @@ static irqreturn_t dw_mci_interrupt(int irq, void *dev_id) > } > > if (pending & SDMMC_INT_DATA_OVER) { > + spin_lock_irqsave(&host->irq_lock, irqflags); > + > del_timer(&host->dto_timer); > > mci_writel(host, RINTSTS, SDMMC_INT_DATA_OVER); > @@ -2695,6 +2712,8 @@ static irqreturn_t dw_mci_interrupt(int irq, void *dev_id) > } > set_bit(EVENT_DATA_COMPLETE, &host->pending_events); > tasklet_schedule(&host->tasklet); > + > + spin_unlock_irqrestore(&host->irq_lock, irqflags); > } > > if (pending & SDMMC_INT_RXDR) { > @@ -3044,7 +3063,31 @@ static void dw_mci_cto_timer(unsigned long arg) > static void dw_mci_dto_timer(unsigned long arg) > { > struct dw_mci *host = (struct dw_mci *)arg; > + unsigned long irqflags; > + u32 pending; > + > + spin_lock_irqsave(&host->irq_lock, irqflags); > > + /* > + * The DTO timer is much longer than the CTO timer, so it's even less > + * likely that we'll these cases, but it pays to be paranoid. > + */ > + pending = mci_readl(host, MINTSTS); /* read-only mask reg */ > + if (pending & SDMMC_INT_DATA_OVER) { > + /* The interrupt should fire; no need to act but we can warn */ > + dev_warn(host->dev, "Unexpected data interrupt latency\n"); > + goto exit; I was checking a problem like this: (1) Start a CTO timer (2) Start a command (3) Got CMD_DONE interrupt and cancel the CTO timer (4) Start a DRTO timer (5) Start external dma to get the data from fifo (6) The system bus/DRAM port is idle for a very long time for no matter what happen. (7) DRTO timer fires but DTO was set as the card have already sent all data to the fifo. (8) Now you patch bails out earlier and notify the mmc core that this data transfer was finished successfully. (9) mmc core propgate the successful state to block layer and maybe a critical reader in file system will use the data right now but it falls into trouble due to the incomplete data. The problem comes from step 6 and setep 7. Quote some bit from dwmmc databook, V270a, section 7.1, "While using the external DMA interface for reading from a card, the DTO interrupt occurs only after all the data is flushed to memory by the DMA Interface unit. A Busy Clear Interrupt is asserted after the DTO." So the DTO isn't reliable or perfectly good in practice for that case that the delay is in external DMA side. That is hard to reproduced but it was the reason for me to come up with the immature idea of adding a longer enough and catch-all timer. Or we only set a longer enough timeout value for CTO and DRTO timer and we could blindly believe the hardware falls into troube for HW reason and seems that makes the change simpler. Looking forward to your opinion. :) > + } > + if (test_bit(EVENT_DATA_COMPLETE, &host->pending_events)) { > + /* Presumably interrupt handler couldn't delete the timer */ > + dev_warn(host->dev, "DTO timeout when already completed\n"); > + goto exit; > + } > + > + /* > + * Continued paranoia to make sure we're in the state we expect. > + * This paranoia isn't really justified but it seems good to be safe. > + */ > switch (host->state) { > case STATE_SENDING_DATA: > case STATE_DATA_BUSY: > @@ -3059,8 +3102,13 @@ static void dw_mci_dto_timer(unsigned long arg) > tasklet_schedule(&host->tasklet); > break; > default: > + dev_warn(host->dev, "Unexpected data timeout, state %d\n", > + host->state); > break; > } > + > +exit: > + spin_unlock_irqrestore(&host->irq_lock, irqflags); > } > > #ifdef CONFIG_OF > -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi, On Mon, Oct 16, 2017 at 6:17 PM, Shawn Lin <shawn.lin@rock-chips.com> wrote: > Hi Doug > > > On 2017/10/13 4:11, Douglas Anderson wrote: >> >> The recent CTO timer introduced in commit 03de19212ea3 ("mmc: dw_mmc: >> introduce timer for broken command transfer over scheme") was causing >> observable problems due to race conditions. Previous patches have >> fixed those race conditions. >> >> It can be observed that these same race conditions ought to be >> theoretically possible with the DTO timer too though they are >> massively less likely to happen because the data timeout is always set >> to 0xffffff right now. That means even at a 200 MHz card clock we >> were arming the DTO timer for 94 ms: >> >>> (0xffffff * 1000. / 200000000) + 10 >> 93.886075 >> >> We always also were setting the DTO timer _after_ starting the >> transfer, unlike how the old code was seting the CTO timer. >> >> In any case, even though the DTO timer is much less likely to have >> races, it still makes sense to add code to handle it _just in case_. >> >> Signed-off-by: Douglas Anderson <dianders@chromium.org> >> --- >> >> Changes in v2: >> - Cleanup the DTO timer new for v2 >> >> drivers/mmc/host/dw_mmc.c | 54 >> ++++++++++++++++++++++++++++++++++++++++++++--- >> 1 file changed, 51 insertions(+), 3 deletions(-) >> >> diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c >> index 6bc87b1385a9..bc0808615431 100644 >> --- a/drivers/mmc/host/dw_mmc.c >> +++ b/drivers/mmc/host/dw_mmc.c >> @@ -1950,7 +1950,11 @@ static void dw_mci_set_drto(struct dw_mci *host) >> /* add a bit spare time */ >> drto_ms += 10; >> - mod_timer(&host->dto_timer, jiffies + msecs_to_jiffies(drto_ms)); >> + spin_lock_irqsave(&host->irq_lock, irqflags); >> + if (!test_bit(EVENT_DATA_COMPLETE, &host->pending_events)) >> + mod_timer(&host->dto_timer, >> + jiffies + msecs_to_jiffies(drto_ms)); >> + spin_unlock_irqrestore(&host->irq_lock, irqflags); >> } >> static bool dw_mci_clear_pending_cmd_complete(struct dw_mci *host) >> @@ -1971,6 +1975,18 @@ static bool >> dw_mci_clear_pending_cmd_complete(struct dw_mci *host) >> return true; >> } >> +static bool dw_mci_clear_pending_data_complete(struct dw_mci *host) >> +{ >> + if (!test_bit(EVENT_DATA_COMPLETE, &host->pending_events)) >> + return false; >> + >> + /* Extra paranoia just like dw_mci_clear_pending_cmd_complete() */ >> + WARN_ON(del_timer_sync(&host->dto_timer)); >> + clear_bit(EVENT_DATA_COMPLETE, &host->pending_events); >> + >> + return true; >> +} >> + >> static void dw_mci_tasklet_func(unsigned long priv) >> { >> struct dw_mci *host = (struct dw_mci *)priv; >> @@ -2112,8 +2128,7 @@ static void dw_mci_tasklet_func(unsigned long priv) >> /* fall through */ >> case STATE_DATA_BUSY: >> - if (!test_and_clear_bit(EVENT_DATA_COMPLETE, >> - &host->pending_events)) { >> + if (!dw_mci_clear_pending_data_complete(host)) { >> /* >> * If data error interrupt comes but data >> over >> * interrupt doesn't come within the given >> time. >> @@ -2683,6 +2698,8 @@ static irqreturn_t dw_mci_interrupt(int irq, void >> *dev_id) >> } >> if (pending & SDMMC_INT_DATA_OVER) { >> + spin_lock_irqsave(&host->irq_lock, irqflags); >> + >> del_timer(&host->dto_timer); >> mci_writel(host, RINTSTS, SDMMC_INT_DATA_OVER); >> @@ -2695,6 +2712,8 @@ static irqreturn_t dw_mci_interrupt(int irq, void >> *dev_id) >> } >> set_bit(EVENT_DATA_COMPLETE, >> &host->pending_events); >> tasklet_schedule(&host->tasklet); >> + >> + spin_unlock_irqrestore(&host->irq_lock, irqflags); >> } >> if (pending & SDMMC_INT_RXDR) { >> @@ -3044,7 +3063,31 @@ static void dw_mci_cto_timer(unsigned long arg) >> static void dw_mci_dto_timer(unsigned long arg) >> { >> struct dw_mci *host = (struct dw_mci *)arg; >> + unsigned long irqflags; >> + u32 pending; >> + >> + spin_lock_irqsave(&host->irq_lock, irqflags); >> + /* >> + * The DTO timer is much longer than the CTO timer, so it's even >> less >> + * likely that we'll these cases, but it pays to be paranoid. >> + */ >> + pending = mci_readl(host, MINTSTS); /* read-only mask reg */ >> + if (pending & SDMMC_INT_DATA_OVER) { >> + /* The interrupt should fire; no need to act but we can >> warn */ >> + dev_warn(host->dev, "Unexpected data interrupt >> latency\n"); >> + goto exit; > > > I was checking a problem like this: > > (1) Start a CTO timer > (2) Start a command > (3) Got CMD_DONE interrupt and cancel the CTO timer > (4) Start a DRTO timer > (5) Start external dma to get the data from fifo > (6) The system bus/DRAM port is idle for a very long time for no > matter what happen. > (7) DRTO timer fires but DTO was set as the card have already > sent all data to the fifo. > (8) Now you patch bails out earlier and notify the mmc core that this > data transfer was finished successfully. I don't understand how you're saying that my patch will notify the mmc core that the data transfer was finished successfully. Two things: A) My patch should only be fixing race conditions here and not introducing anything new. In other words if we are somehow accidentally telling the MMC core that we have a successful transfer then I don't believe that's something new that my patch introduced. B) If the dw_mci_dto_timer function gets called then we always indicate an error. Specifically the _only_ action that the dw_mci_dto_timer() function can take is this: host->data_status = SDMMC_INT_DRTO; set_bit(EVENT_DATA_ERROR, &host->pending_events); set_bit(EVENT_DATA_COMPLETE, &host->pending_events); tasklet_schedule(&host->tasklet); Which sets the "EVENT_DATA_ERROR" and thus can't tell the mmc core that this data transfer was finished "successfully" > (9) mmc core propgate the successful state to block layer and maybe > a critical reader in file system will use the data right now but it > falls into trouble due to the incomplete data. > > > The problem comes from step 6 and setep 7. Quote some bit from dwmmc > databook, V270a, section 7.1, > > "While using the external DMA interface for reading from a card, the DTO > interrupt occurs only after all the data is flushed to memory by the DMA > Interface unit. A Busy Clear Interrupt is asserted after the DTO." Ugh. Not your fault, but terrible terms. I keep getting "DTO" and "DRTO" confused, especially since in the code the "drto" timer is called the "dto" timer. DTO = Data Transfer Over DRTO = Data Read Time Out NOTE: it seems the bit you're quoting from the databook say that the DTO is expected to be delayed with external DMA. This doesn't seem to match what you said above that "(7) DRTO timer fires but DTO was set as the card have already sent all data to the fifo.". If the databook is saying that "DTO" will be delayed then how could DTO already be set when the timer fires?? > So the DTO isn't reliable or perfectly good in practice for that case > that the delay is in external DMA side. So just to restate to make sure I'm understanding you properly: If you're using external DMA then it's possible that you'll get a Data Transfer Over (DTO) interrupt at some point in time _later_ than the more than 94 ms that we're waiting because the DTO timer can't be asserted until all the DMA is flushed. Actually, on Rockchip you can't run faster than 150 MHz, so it's actually 121 ms. It seems a little bit hard to believe that DMA for a transfer is taking more than 121 ms to flush, but I guess it could happen? It seems even harder to believe that it's taking > 121 ms to flush and the system is running well enough that it was able to get to the dto timer function all without the DTO interrupt bit even being set. In any case, if the DMA transfer really is taking more than 121 ms to flush then we'll assert a DRTO interrupt and report an error to the MMC core. I suppose (by chance) we could somehow get confused when the DTO interrupt finally fires and then we could think that a 2nd transfer finished, but I'm not even sure that would happen... > That is hard to reproduced but > it was the reason for me to come up with the immature idea of adding > a longer enough and catch-all timer. Or we only set a longer enough > timeout value for CTO and DRTO timer and we could blindly believe the > hardware falls into troube for HW reason and seems that makes the change > simpler. Looking forward to your opinion. :) If you're running into the problem you describe, it kinda sounds like it's more reason _not_ to use the same code for the CTO and DRTO timers. As I understand it, the CTO timer _doesn't_ suffer from the problems above., so we shouldn't make it suffer any workarounds we need for the DRTO. Also the CTO timer is _very_ fast. We expect a normal CTO within 1 ms whereas the DRTO timer is much, much longer. If it's been 10 ms and we haven't seen a command finish and haven't seen a real CTO then there's no reason to delay further. As for blindly setting a longer timeout for CTO / DRTO I'm not sure that's a great idea. We routinely get these timeouts in tuning and we really don't want to make tuning even slower than it already is by lengthening any of these timeouts too much. Overall: if you're having weird trouble with external DMA as you describe, I suppose you could just have an even longer DRTO delay only for external DMA? NOTE also: the DesignWare Manual that I have (2.80a) actually even suggests that for long data timeouts (like 100ms) that a software timeout is appropriate. They even suggest that in that case you could rely only on the software timeout. They say: > Note: The software timer should be used if the timeout value is in the order > of 100 ms. In this case, read data timeout interrupt needs to be disabled. Presumably they are saying that because you can't really express much more than 100 ms in the TMOUT register? --- Just to summarize: * I don't think my patch introduces any new problems like the one you describe. I think if there are problems like that, they are pre-existing. * I don't see a reason to use a catchall timer where we use the same timeout for CTO and DRTO. We could try to save a few bytes of storage space and have a single "struct timer" at the expense of a little extra logic to try to disambiguate, but I'm not terribly interested in writing or reviewing that patch. --- As always, please let me know if I got mixed up somewhere. -Doug -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 2017/10/17 13:05, Doug Anderson wrote: > Hi, > > On Mon, Oct 16, 2017 at 6:17 PM, Shawn Lin <shawn.lin@rock-chips.com> wrote: >> Hi Doug >> >> >> On 2017/10/13 4:11, Douglas Anderson wrote: >>> >>> The recent CTO timer introduced in commit 03de19212ea3 ("mmc: dw_mmc: >>> introduce timer for broken command transfer over scheme") was causing >>> observable problems due to race conditions. Previous patches have >>> fixed those race conditions. >>> >>> It can be observed that these same race conditions ought to be >>> theoretically possible with the DTO timer too though they are >>> massively less likely to happen because the data timeout is always set >>> to 0xffffff right now. That means even at a 200 MHz card clock we >>> were arming the DTO timer for 94 ms: >>> >>> (0xffffff * 1000. / 200000000) + 10 >>> 93.886075 >>> >>> We always also were setting the DTO timer _after_ starting the >>> transfer, unlike how the old code was seting the CTO timer. >>> >>> In any case, even though the DTO timer is much less likely to have >>> races, it still makes sense to add code to handle it _just in case_. >>> >>> Signed-off-by: Douglas Anderson <dianders@chromium.org> >>> --- >>> >>> Changes in v2: >>> - Cleanup the DTO timer new for v2 >>> >>> drivers/mmc/host/dw_mmc.c | 54 >>> ++++++++++++++++++++++++++++++++++++++++++++--- >>> 1 file changed, 51 insertions(+), 3 deletions(-) >>> >>> diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c >>> index 6bc87b1385a9..bc0808615431 100644 >>> --- a/drivers/mmc/host/dw_mmc.c >>> +++ b/drivers/mmc/host/dw_mmc.c >>> @@ -1950,7 +1950,11 @@ static void dw_mci_set_drto(struct dw_mci *host) >>> /* add a bit spare time */ >>> drto_ms += 10; >>> - mod_timer(&host->dto_timer, jiffies + msecs_to_jiffies(drto_ms)); >>> + spin_lock_irqsave(&host->irq_lock, irqflags); >>> + if (!test_bit(EVENT_DATA_COMPLETE, &host->pending_events)) >>> + mod_timer(&host->dto_timer, >>> + jiffies + msecs_to_jiffies(drto_ms)); >>> + spin_unlock_irqrestore(&host->irq_lock, irqflags); >>> } >>> static bool dw_mci_clear_pending_cmd_complete(struct dw_mci *host) >>> @@ -1971,6 +1975,18 @@ static bool >>> dw_mci_clear_pending_cmd_complete(struct dw_mci *host) >>> return true; >>> } >>> +static bool dw_mci_clear_pending_data_complete(struct dw_mci *host) >>> +{ >>> + if (!test_bit(EVENT_DATA_COMPLETE, &host->pending_events)) >>> + return false; >>> + >>> + /* Extra paranoia just like dw_mci_clear_pending_cmd_complete() */ >>> + WARN_ON(del_timer_sync(&host->dto_timer)); >>> + clear_bit(EVENT_DATA_COMPLETE, &host->pending_events); >>> + >>> + return true; >>> +} >>> + >>> static void dw_mci_tasklet_func(unsigned long priv) >>> { >>> struct dw_mci *host = (struct dw_mci *)priv; >>> @@ -2112,8 +2128,7 @@ static void dw_mci_tasklet_func(unsigned long priv) >>> /* fall through */ >>> case STATE_DATA_BUSY: >>> - if (!test_and_clear_bit(EVENT_DATA_COMPLETE, >>> - &host->pending_events)) { >>> + if (!dw_mci_clear_pending_data_complete(host)) { >>> /* >>> * If data error interrupt comes but data >>> over >>> * interrupt doesn't come within the given >>> time. >>> @@ -2683,6 +2698,8 @@ static irqreturn_t dw_mci_interrupt(int irq, void >>> *dev_id) >>> } >>> if (pending & SDMMC_INT_DATA_OVER) { >>> + spin_lock_irqsave(&host->irq_lock, irqflags); >>> + >>> del_timer(&host->dto_timer); >>> mci_writel(host, RINTSTS, SDMMC_INT_DATA_OVER); >>> @@ -2695,6 +2712,8 @@ static irqreturn_t dw_mci_interrupt(int irq, void >>> *dev_id) >>> } >>> set_bit(EVENT_DATA_COMPLETE, >>> &host->pending_events); >>> tasklet_schedule(&host->tasklet); >>> + >>> + spin_unlock_irqrestore(&host->irq_lock, irqflags); >>> } >>> if (pending & SDMMC_INT_RXDR) { >>> @@ -3044,7 +3063,31 @@ static void dw_mci_cto_timer(unsigned long arg) >>> static void dw_mci_dto_timer(unsigned long arg) >>> { >>> struct dw_mci *host = (struct dw_mci *)arg; >>> + unsigned long irqflags; >>> + u32 pending; >>> + >>> + spin_lock_irqsave(&host->irq_lock, irqflags); >>> + /* >>> + * The DTO timer is much longer than the CTO timer, so it's even >>> less >>> + * likely that we'll these cases, but it pays to be paranoid. >>> + */ >>> + pending = mci_readl(host, MINTSTS); /* read-only mask reg */ >>> + if (pending & SDMMC_INT_DATA_OVER) { >>> + /* The interrupt should fire; no need to act but we can >>> warn */ >>> + dev_warn(host->dev, "Unexpected data interrupt >>> latency\n"); >>> + goto exit; >> >> >> I was checking a problem like this: >> >> (1) Start a CTO timer >> (2) Start a command >> (3) Got CMD_DONE interrupt and cancel the CTO timer >> (4) Start a DRTO timer >> (5) Start external dma to get the data from fifo >> (6) The system bus/DRAM port is idle for a very long time for no >> matter what happen. >> (7) DRTO timer fires but DTO was set as the card have already >> sent all data to the fifo. >> (8) Now you patch bails out earlier and notify the mmc core that this >> data transfer was finished successfully. > > I don't understand how you're saying that my patch will notify the mmc > core that the data transfer was finished successfully. Two things: > > A) My patch should only be fixing race conditions here and not > introducing anything new. In other words if we are somehow > accidentally telling the MMC core that we have a successful transfer > then I don't believe that's something new that my patch introduced. > > > B) If the dw_mci_dto_timer function gets called then we always > indicate an error. Oh，yes it is. I overlooked the "goto exit;". > > Specifically the _only_ action that the dw_mci_dto_timer() function > can take is this: > > host->data_status = SDMMC_INT_DRTO; > set_bit(EVENT_DATA_ERROR, &host->pending_events); > set_bit(EVENT_DATA_COMPLETE, &host->pending_events); > tasklet_schedule(&host->tasklet); > > Which sets the "EVENT_DATA_ERROR" and thus can't tell the mmc core > that this data transfer was finished "successfully" > >> (9) mmc core propgate the successful state to block layer and maybe >> a critical reader in file system will use the data right now but it >> falls into trouble due to the incomplete data. >> >> >> The problem comes from step 6 and setep 7. Quote some bit from dwmmc >> databook, V270a, section 7.1, >> >> "While using the external DMA interface for reading from a card, the DTO >> interrupt occurs only after all the data is flushed to memory by the DMA >> Interface unit. A Busy Clear Interrupt is asserted after the DTO." > > Ugh. Not your fault, but terrible terms. I keep getting "DTO" and > "DRTO" confused, especially since in the code the "drto" timer is > called the "dto" timer. > > DTO = Data Transfer Over > DRTO = Data Read Time Out > > NOTE: it seems the bit you're quoting from the databook say that the > DTO is expected to be delayed with external DMA. This doesn't seem to > match what you said above that "(7) DRTO timer fires but DTO was set > as the card have already sent all data to the fifo.". If the databook > is saying that "DTO" will be delayed then how could DTO already be set > when the timer fires?? > > > >> So the DTO isn't reliable or perfectly good in practice for that case >> that the delay is in external DMA side. > > So just to restate to make sure I'm understanding you properly: > > If you're using external DMA then it's possible that you'll get a Data > Transfer Over (DTO) interrupt at some point in time _later_ than the > more than 94 ms that we're waiting because the DTO timer can't be > asserted until all the DMA is flushed. Actually, on Rockchip you > can't run faster than 150 MHz, so it's actually 121 ms. It seems a > little bit hard to believe that DMA for a transfer is taking more than > 121 ms to flush, but I guess it could happen? > In theory it could, but I didn't see it. > It seems even harder to believe that it's taking > 121 ms to flush and > the system is running well enough that it was able to get to the dto > timer function all without the DTO interrupt bit even being set. > > In any case, if the DMA transfer really is taking more than 121 ms to > flush then we'll assert a DRTO interrupt and report an error to the > MMC core. I suppose (by chance) we could somehow get confused when > the DTO interrupt finally fires and then we could think that a 2nd > transfer finished, but I'm not even sure that would happen... So there is no problem now for me as I missed some code above. > > >> That is hard to reproduced but >> it was the reason for me to come up with the immature idea of adding >> a longer enough and catch-all timer. Or we only set a longer enough >> timeout value for CTO and DRTO timer and we could blindly believe the >> hardware falls into troube for HW reason and seems that makes the change >> simpler. Looking forward to your opinion. :) > > If you're running into the problem you describe, it kinda sounds like > it's more reason _not_ to use the same code for the CTO and DRTO > timers. As I understand it, the CTO timer _doesn't_ suffer from the > problems above., so we shouldn't make it suffer any workarounds we > need for the DRTO. Also the CTO timer is _very_ fast. We expect a > normal CTO within 1 ms whereas the DRTO timer is much, much longer. > If it's been 10 ms and we haven't seen a command finish and haven't > seen a real CTO then there's no reason to delay further. Ok, now I aggree with you. > > > As for blindly setting a longer timeout for CTO / DRTO I'm not sure > that's a great idea. We routinely get these timeouts in tuning and we > really don't want to make tuning even slower than it already is by > lengthening any of these timeouts too much. > > > Overall: if you're having weird trouble with external DMA as you > describe, I suppose you could just have an even longer DRTO delay only > for external DMA? > > > NOTE also: the DesignWare Manual that I have (2.80a) actually even > suggests that for long data timeouts (like 100ms) that a software > timeout is appropriate. They even suggest that in that case you could > rely only on the software timeout. They say: > >> Note: The software timer should be used if the timeout value is in the order >> of 100 ms. In this case, read data timeout interrupt needs to be disabled. > > Presumably they are saying that because you can't really express much > more than 100 ms in the TMOUT register? I'm not sure, as it says the timeout value is in the *order* of 100ms. > > --- > > Just to summarize: > > * I don't think my patch introduces any new problems like the one you > describe. I think if there are problems like that, they are > pre-existing. > > * I don't see a reason to use a catchall timer where we use the same > timeout for CTO and DRTO. We could try to save a few bytes of storage > space and have a single "struct timer" at the expense of a little > extra logic to try to disambiguate, but I'm not terribly interested in > writing or reviewing that patch. Not need to do that. > > --- > > As always, please let me know if I got mixed up somewhere. Thanks for helping me understand the solution correctly. FWIW: Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com> > > -Doug > -- > To unsubscribe from this list: send the line "unsubscribe linux-mmc" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html > > > -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c index 6bc87b1385a9..bc0808615431 100644 --- a/drivers/mmc/host/dw_mmc.c +++ b/drivers/mmc/host/dw_mmc.c @@ -1950,7 +1950,11 @@ static void dw_mci_set_drto(struct dw_mci *host) /* add a bit spare time */ drto_ms += 10; - mod_timer(&host->dto_timer, jiffies + msecs_to_jiffies(drto_ms)); + spin_lock_irqsave(&host->irq_lock, irqflags); + if (!test_bit(EVENT_DATA_COMPLETE, &host->pending_events)) + mod_timer(&host->dto_timer, + jiffies + msecs_to_jiffies(drto_ms)); + spin_unlock_irqrestore(&host->irq_lock, irqflags); } static bool dw_mci_clear_pending_cmd_complete(struct dw_mci *host) @@ -1971,6 +1975,18 @@ static bool dw_mci_clear_pending_cmd_complete(struct dw_mci *host) return true; } +static bool dw_mci_clear_pending_data_complete(struct dw_mci *host) +{ + if (!test_bit(EVENT_DATA_COMPLETE, &host->pending_events)) + return false; + + /* Extra paranoia just like dw_mci_clear_pending_cmd_complete() */ + WARN_ON(del_timer_sync(&host->dto_timer)); + clear_bit(EVENT_DATA_COMPLETE, &host->pending_events); + + return true; +} + static void dw_mci_tasklet_func(unsigned long priv) { struct dw_mci *host = (struct dw_mci *)priv; @@ -2112,8 +2128,7 @@ static void dw_mci_tasklet_func(unsigned long priv) /* fall through */ case STATE_DATA_BUSY: - if (!test_and_clear_bit(EVENT_DATA_COMPLETE, - &host->pending_events)) { + if (!dw_mci_clear_pending_data_complete(host)) { /* * If data error interrupt comes but data over * interrupt doesn't come within the given time. @@ -2683,6 +2698,8 @@ static irqreturn_t dw_mci_interrupt(int irq, void *dev_id) } if (pending & SDMMC_INT_DATA_OVER) { + spin_lock_irqsave(&host->irq_lock, irqflags); + del_timer(&host->dto_timer); mci_writel(host, RINTSTS, SDMMC_INT_DATA_OVER); @@ -2695,6 +2712,8 @@ static irqreturn_t dw_mci_interrupt(int irq, void *dev_id) } set_bit(EVENT_DATA_COMPLETE, &host->pending_events); tasklet_schedule(&host->tasklet); + + spin_unlock_irqrestore(&host->irq_lock, irqflags); } if (pending & SDMMC_INT_RXDR) { @@ -3044,7 +3063,31 @@ static void dw_mci_cto_timer(unsigned long arg) static void dw_mci_dto_timer(unsigned long arg) { struct dw_mci *host = (struct dw_mci *)arg; + unsigned long irqflags; + u32 pending; + + spin_lock_irqsave(&host->irq_lock, irqflags); + /* + * The DTO timer is much longer than the CTO timer, so it's even less + * likely that we'll these cases, but it pays to be paranoid. + */ + pending = mci_readl(host, MINTSTS); /* read-only mask reg */ + if (pending & SDMMC_INT_DATA_OVER) { + /* The interrupt should fire; no need to act but we can warn */ + dev_warn(host->dev, "Unexpected data interrupt latency\n"); + goto exit; + } + if (test_bit(EVENT_DATA_COMPLETE, &host->pending_events)) { + /* Presumably interrupt handler couldn't delete the timer */ + dev_warn(host->dev, "DTO timeout when already completed\n"); + goto exit; + } + + /* + * Continued paranoia to make sure we're in the state we expect. + * This paranoia isn't really justified but it seems good to be safe. + */ switch (host->state) { case STATE_SENDING_DATA: case STATE_DATA_BUSY: @@ -3059,8 +3102,13 @@ static void dw_mci_dto_timer(unsigned long arg) tasklet_schedule(&host->tasklet); break; default: + dev_warn(host->dev, "Unexpected data timeout, state %d\n", + host->state); break; } + +exit: + spin_unlock_irqrestore(&host->irq_lock, irqflags); } #ifdef CONFIG_OF
The recent CTO timer introduced in commit 03de19212ea3 ("mmc: dw_mmc: introduce timer for broken command transfer over scheme") was causing observable problems due to race conditions. Previous patches have fixed those race conditions. It can be observed that these same race conditions ought to be theoretically possible with the DTO timer too though they are massively less likely to happen because the data timeout is always set to 0xffffff right now. That means even at a 200 MHz card clock we were arming the DTO timer for 94 ms: >>> (0xffffff * 1000. / 200000000) + 10 93.886075 We always also were setting the DTO timer _after_ starting the transfer, unlike how the old code was seting the CTO timer. In any case, even though the DTO timer is much less likely to have races, it still makes sense to add code to handle it _just in case_. Signed-off-by: Douglas Anderson <dianders@chromium.org> --- Changes in v2: - Cleanup the DTO timer new for v2 drivers/mmc/host/dw_mmc.c | 54 ++++++++++++++++++++++++++++++++++++++++++++--- 1 file changed, 51 insertions(+), 3 deletions(-)