| Message ID | 20171212140815.28257-3-simon@lineageos.org (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
Hi Simon, Thanks for new boards! +Cc Marek, Bartlomiej, On Tue, Dec 12, 2017 at 3:08 PM, Simon Shields <simon@lineageos.org> wrote: > "midas" is the codename for a family of smartphones released by Samsung > Mobile. It includes the Galaxy S3 (GT-I9300/I9305) and the Galaxy > Note 2 (GT-N7100/N7105). The boards largely have the same peripherals: > the main differences are touchscreen, display panel and cellular modem. > > Signed-off-by: Simon Shields <simon@lineageos.org> > --- > arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi | 144 +++ > arch/arm/boot/dts/exynos4412-m0.dts | 14 + > arch/arm/boot/dts/exynos4412-m3.dts | 19 + > arch/arm/boot/dts/exynos4412-midas.dtsi | 1291 +++++++++++++++++++++++++++ M0 is essentially Trats2. You are duplicating here almost entire Trats2 which means: 1. A lot of duplicated code thus it will require more maintenance to keep DTS synced, 2. It is very difficult to spot the changes and possible errors between Trats2 and Midas DTSI/M0. Please make a generic family of devices based on Midas, including Trats2. You might make it in steps for easier review: 1. Split common Trats2 part, 2. Add new boards. Also, few minor nits below. > arch/arm/boot/dts/exynos4412-t0.dts | 51 ++ > 5 files changed, 1519 insertions(+) > create mode 100644 arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi > create mode 100644 arch/arm/boot/dts/exynos4412-m0.dts > create mode 100644 arch/arm/boot/dts/exynos4412-m3.dts > create mode 100644 arch/arm/boot/dts/exynos4412-midas.dtsi > create mode 100644 arch/arm/boot/dts/exynos4412-t0.dts > > diff --git a/arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi b/arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi > new file mode 100644 > index 000000000000..536195adfe65 > --- /dev/null > +++ b/arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi > @@ -0,0 +1,144 @@ > +// SPDX-License-Identifier: GPL-2.0 > +/dts-v1/; > +#include "exynos4412-midas.dtsi" > + > +/ { > + regulators { > + lcd_vdd3_reg: voltage-regulator-10 { > + compatible = "regulator-fixed"; > + regulator-name = "LCD_VDD_2.2V"; > + regulator-min-microvolt = <2200000>; > + regulator-max-microvolt = <2200000>; > + enable-active-high; > + gpio = <&gpc0 1 GPIO_ACTIVE_HIGH>; > + }; > + > + ps_als_reg: voltage-regulator-11 { > + compatible = "regulator-fixed"; > + regulator-name = "LED_A_3.0V"; > + regulator-min-microvolt = <3000000>; > + regulator-max-microvolt = <3000000>; > + enable-active-high; > + gpio = <&gpj0 5 GPIO_ACTIVE_HIGH>; > + }; > + }; > + > + i2c_ak8975: i2c-gpio-10 { > + compatible = "i2c-gpio"; > + gpios = <&gpy2 4 GPIO_ACTIVE_HIGH>, <&gpy2 5 GPIO_ACTIVE_HIGH>; > + i2c-gpio,delay-us = <2>; > + #address-cells = <1>; > + #size-cells = <0>; > + > + ak8975@c { > + compatible = "asahi-kasei,ak8975"; > + reg = <0x0c>; > + gpios = <&gpj0 7 GPIO_ACTIVE_HIGH>; > + }; > + }; > + > + i2c_cm36651: i2c-gpio-11 { > + compatible = "i2c-gpio"; > + gpios = <&gpf0 0 GPIO_ACTIVE_LOW>, <&gpf0 1 GPIO_ACTIVE_LOW>; > + i2c-gpio,delay-us = <2>; > + #address-cells = <1>; > + #size-cells = <0>; > + > + cm36651@18 { > + compatible = "capella,cm36651"; > + reg = <0x18>; > + interrupt-parent = <&gpx0>; > + interrupts = <2 IRQ_EDGE_TYPE_FALLING>; > + vled-supply = <&ps_als_reg>; > + }; > + }; > +}; > + > +&buck9_reg { > + maxim,ena-gpios = <&gpm0 3 GPIO_ACTIVE_HIGH>; > +}; > + > +&cam_af_reg { > + gpio = <&gpm0 4 GPIO_ACTIVE_HIGH>; > + status = "okay"; > +}; > + > +&cam_io_reg { > + gpio = <&gpm0 2 GPIO_ACTIVE_HIGH>; > + status = "okay"; > +}; > + > +&dsi_0 { > + vddcore-supply = <&ldo8_reg>; > + vddio-supply = <&ldo10_reg>; > + samsung,burst-clock-frequency = <500000000>; > + samsung,esc-clock-frequency = <20000000>; > + samsung,pll-clock-frequency = <24000000>; > + status = "okay"; > + > + panel@0 { > + compatible = "samsung,s6e8aa0"; > + reg = <0>; > + vdd3-supply = <&lcd_vdd3_reg>; > + vci-supply = <&ldo25_reg>; > + reset-gpios = <&gpf2 1 GPIO_ACTIVE_HIGH>; > + power-on-delay= <50>; > + reset-delay = <100>; > + init-delay = <100>; > + flip-horizontal; > + flip-vertical; > + panel-width-mm = <58>; > + panel-height-mm = <103>; > + > + display-timings { > + timing-0 { > + clock-frequency = <57153600>; > + hactive = <720>; > + vactive = <1280>; > + hfront-porch = <5>; > + hback-porch = <5>; > + hsync-len = <5>; > + vfront-porch = <13>; > + vback-porch = <1>; > + vsync-len = <2>; > + }; > + }; > + }; > +}; > + > +&i2c_0 { > + status = "okay"; > +}; > + > +&i2c_3 { > + samsung,i2c-sda-delay = <100>; > + samsung,i2c-slave-addr = <0x10>; > + samsung,i2c-max-bus-freq = <400000>; > + pinctrl-0 = <&i2c3_bus>; > + pinctrl-names = "default"; > + status = "okay"; > + > + mms114-touchscreen@48 { > + compatible = "melfas,mms114"; > + reg = <0x48>; > + interrupt-parent = <&gpm2>; > + interrupts = <3 IRQ_EDGE_TYPE_FALLING>; > + x-size = <720>; > + y-size = <1280>; > + avdd-supply = <&ldo23_reg>; > + vdd-supply = <&ldo24_reg>; > + }; > +}; > + > +&ldo17_reg { > + regulator-name = "CAM_SENSOR_CORE_1.2V"; > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <1200000>; > +}; > + > +&ldo25_reg { > + regulator-name = "LCD_VCC_3.3V"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > +}; > + > diff --git a/arch/arm/boot/dts/exynos4412-m0.dts b/arch/arm/boot/dts/exynos4412-m0.dts > new file mode 100644 > index 000000000000..18aff81682a9 > --- /dev/null > +++ b/arch/arm/boot/dts/exynos4412-m0.dts > @@ -0,0 +1,14 @@ > +// SPDX-License-Identifier: GPL-2.0 > +/dts-v1/; > +#include "exynos4412-galaxy-s3.dtsi" > + > +/ { > + compatible = "samsung,m0", "samsung,midas", "samsung,exynos4412", "samsung,exynos4"; > + model = "Samsung M0 (GT-I9300) based on Exynos4412"; > + > + memory@40000000 { > + device_type = "memory"; > + reg = <0x40000000 0x40000000>; > + }; > +}; > + > diff --git a/arch/arm/boot/dts/exynos4412-m3.dts b/arch/arm/boot/dts/exynos4412-m3.dts > new file mode 100644 > index 000000000000..e13ee49ad867 > --- /dev/null > +++ b/arch/arm/boot/dts/exynos4412-m3.dts > @@ -0,0 +1,19 @@ > +// SPDX-License-Identifier: GPL-2.0 > +/dts-v1/; > +#include "exynos4412-galaxy-s3.dtsi" > + > +/ { > + compatible = "samsung,m3", "samsung,midas", "samsung,exynos4412", "samsung,exynos4"; > + model = "Samsung M3 (GT-I9305) based on Exynos4412"; > + > + memory@40000000 { > + device_type = "memory"; > + reg = <0x40000000 0x80000000>; > + }; > +}; > + > +&i2c0_bus { > + // SCL and SDA pins are swapped Use /* comments (except SPDX line). > + samsung,pins = "gpd1-1", "gpd1-0"; > +}; > + > diff --git a/arch/arm/boot/dts/exynos4412-midas.dtsi b/arch/arm/boot/dts/exynos4412-midas.dtsi > new file mode 100644 > index 000000000000..65c1e2d14d26 > --- /dev/null > +++ b/arch/arm/boot/dts/exynos4412-midas.dtsi > @@ -0,0 +1,1291 @@ > +// SPDX-License-Identifier: GPL-2.0 > +/dts-v1/; > +#include "exynos4412.dtsi" > +#include "exynos4412-ppmu-common.dtsi" > +#include <dt-bindings/gpio/gpio.h> > +#include <dt-bindings/interrupt-controller/irq.h> > +#include <dt-bindings/clock/maxim,max77686.h> > +#include <dt-bindings/pinctrl/samsung.h> > + > +/ { > + compatible = "samsung,midas", "samsung,exynos4412", "samsung,exynos4"; > + > + aliases { > + i2c9 = &i2c_max77693; > + i2c10 = &i2c_max77693_fuel; > + }; > + > + chosen { > + stdout-path = &serial_2; > + }; > + > + firmware@204f000 { > + compatible = "samsung,secure-firmware"; > + reg = <0x0204F000 0x1000>; > + }; > + > + fixed-rate-clocks { > + xxti { > + compatible = "samsung,clock-xxti", "fixed-clock"; > + clock-frequency = <0>; > + }; > + > + xusbxti { > + compatible = "samsung,clock-xusbxti", "fixed-clock"; > + clock-frequency = <24000000>; > + }; > + }; > + > + regulators { > + compatible = "simple-bus"; > + #address-cells = <1>; > + #size-cells = <0>; > + > + cam_io_reg: voltage-regulator-0 { > + compatible = "regulator-fixed"; > + regulator-name = "CAM_SENSOR_A"; > + regulator-min-microvolt = <2800000>; > + regulator-max-microvolt = <2800000>; > + enable-active-high; > + status = "disabled"; > + }; > + > + cam_af_reg: voltage-regulator-1 { > + compatible = "regulator-fixed"; > + regulator-name = "CAM_AF"; > + regulator-min-microvolt = <2800000>; > + regulator-max-microvolt = <2800000>; > + enable-active-high; > + status = "disabled"; > + }; > + > + vsil12: voltage-regulator-6 { > + compatible = "regulator-fixed"; > + regulator-name = "VSIL_1.2V"; > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <1200000>; > + gpio = <&gpl0 4 GPIO_ACTIVE_HIGH>; > + enable-active-high; > + vin-supply = <&buck7_reg>; > + }; > + > + vcc33mhl: voltage-regulator-7 { > + compatible = "regulator-fixed"; > + regulator-name = "VCC_3.3_MHL"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + gpio = <&gpl0 4 GPIO_ACTIVE_HIGH>; > + enable-active-high; > + }; > + > + vcc18mhl: voltage-regulator-8 { > + compatible = "regulator-fixed"; > + regulator-name = "VCC_1.8_MHL"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + gpio = <&gpl0 4 GPIO_ACTIVE_HIGH>; > + enable-active-high; > + }; > + > + }; > + > + gpio-keys { > + compatible = "gpio-keys"; > + > + key-down { > + gpios = <&gpx3 3 GPIO_ACTIVE_LOW>; > + linux,code = <114>; > + label = "volume down"; > + debounce-interval = <10>; > + }; > + > + key-up { > + gpios = <&gpx2 2 GPIO_ACTIVE_LOW>; > + linux,code = <115>; > + label = "volume up"; > + debounce-interval = <10>; > + }; > + > + key-power { > + gpios = <&gpx2 7 GPIO_ACTIVE_LOW>; > + linux,code = <116>; > + label = "power"; > + debounce-interval = <10>; > + wakeup-source; > + }; > + > + key-home { > + gpios = <&gpx0 1 GPIO_ACTIVE_LOW>; > + linux,code = <172>; > + label = "home"; > + debounce-inteval = <10>; > + wakeup-source; > + }; > + }; > + > + i2c_max77693: i2c-gpio-0 { > + compatible = "i2c-gpio"; > + gpios = <&gpm2 0 GPIO_ACTIVE_HIGH>, <&gpm2 1 GPIO_ACTIVE_HIGH>; > + i2c-gpio,delay-us = <2>; > + #address-cells = <1>; > + #size-cells = <0>; > + status = "okay"; > + > + max77693@66 { > + compatible = "maxim,max77693"; > + interrupt-parent = <&gpx1>; > + interrupts = <5 IRQ_EDGE_TYPE_FALLING>; > + reg = <0x66>; > + > + regulators { > + esafeout1_reg: ESAFEOUT1 { > + regulator-name = "ESAFEOUT1"; > + }; > + esafeout2_reg: ESAFEOUT2 { > + regulator-name = "ESAFEOUT2"; > + }; > + charger_reg: CHARGER { > + regulator-name = "CHARGER"; > + regulator-min-microamp = <60000>; > + regulator-max-microamp = <2580000>; > + }; > + }; > + > + max77693_haptic { > + compatible = "maxim,max77693-haptic"; > + haptic-supply = <&ldo26_reg>; > + pwms = <&pwm 0 38022 0>; > + }; > + > + charger { > + compatible = "maxim,max77693-charger"; > + > + maxim,constant-microvolt = <4350000>; > + maxim,min-system-microvolt = <3600000>; > + maxim,thermal-regulation-celsius = <100>; > + maxim,battery-overcurrent-microamp = <3500000>; > + maxim,charge-input-threshold-microvolt = <4300000>; > + }; > + }; > + }; > + > + i2c_max77693_fuel: i2c-gpio-1 { > + compatible = "i2c-gpio"; > + gpios = <&gpf1 5 GPIO_ACTIVE_HIGH>, <&gpf1 4 GPIO_ACTIVE_HIGH>; > + i2c-gpio,delay-us = <2>; > + #address-cells = <1>; > + #size-cells = <0>; > + status = "okay"; > + > + max77693-fuel-gauge@36 { > + compatible = "maxim,max17047"; > + interrupt-parent = <&gpx2>; > + interrupts = <3 IRQ_TYPE_EDGE_FALLING>; > + reg = <0x36>; > + > + maxim,over-heat-temp = <700>; > + maxim,over-volt = <4500>; > + }; > + }; > + > + i2c-mhl { > + compatible = "i2c-gpio"; > + gpios = <&gpf0 4 GPIO_ACTIVE_HIGH>, <&gpf0 6 GPIO_ACTIVE_HIGH>; > + i2c-gpio,delay-us = <100>; > + #address-cells = <1>; > + #size-cells = <0>; > + > + pinctrl-0 = <&i2c_mhl_bus>; > + pinctrl-names = "default"; > + status = "okay"; > + > + sii9234: hdmi-bridge@39 { > + compatible = "sil,sii9234"; > + avcc33-supply = <&vcc33mhl>; > + iovcc18-supply = <&vcc18mhl>; > + avcc12-supply = <&vsil12>; > + cvcc12-supply = <&vsil12>; > + reset-gpios = <&gpf3 4 GPIO_ACTIVE_LOW>; > + interrupt-parent = <&gpf3>; > + interrupts = <5 IRQ_TYPE_LEVEL_HIGH>; > + reg = <0x39>; > + > + port { > + mhl_to_hdmi: endpoint { > + remote-endpoint = <&hdmi_to_mhl>; > + }; > + }; > + }; > + }; > + > + camera: camera { > + pinctrl-0 = <&cam_port_a_clk_active &cam_port_b_clk_active>; > + pinctrl-names = "default"; > + status = "okay"; > + assigned-clocks = <&clock CLK_MOUT_CAM0>, > + <&clock CLK_MOUT_CAM1>; > + assigned-clock-parents = <&clock CLK_XUSBXTI>, > + <&clock CLK_XUSBXTI>; > + }; > + > + wlan_pwrseq: sdhci3-pwrseq { > + compatible = "mmc-pwrseq-simple"; > + reset-gpios = <&gpj0 0 GPIO_ACTIVE_LOW>; > + clocks = <&max77686 MAX77686_CLK_PMIC>; > + clock-names = "ext_clock"; > + }; > + > + thermistor-ap { > + compatible = "murata,ncp15wb473"; > + pullup-uv = <1800000>; /* VCC_1.8V_AP */ > + pullup-ohm = <100000>; /* 100K */ > + pulldown-ohm = <100000>; /* 100K */ > + io-channels = <&adc 1>; /* AP temperature */ > + }; > + > + thermistor-battery { > + compatible = "murata,ncp15wb473"; > + pullup-uv = <1800000>; /* VCC_1.8V_AP */ > + pullup-ohm = <100000>; /* 100K */ > + pulldown-ohm = <100000>; /* 100K */ > + io-channels = <&adc 2>; /* Battery temperature */ > + }; > + > + thermal-zones { > + cpu_thermal: cpu-thermal { > + cooling-maps { > + map0 { > + /* Corresponds to 800MHz at freq_table */ > + cooling-device = <&cpu0 7 7>; > + }; > + map1 { > + /* Corresponds to 200MHz at freq_table */ > + cooling-device = <&cpu0 13 13>; > + }; > + }; > + }; > + }; > + > +}; > + > +&adc { > + vdd-supply = <&ldo3_reg>; > + status = "okay"; > +}; > + > +&bus_dmc { > + devfreq-events = <&ppmu_dmc0_3>, <&ppmu_dmc1_3>; > + vdd-supply = <&buck1_reg>; > + status = "okay"; > +}; > + > +&bus_acp { > + devfreq = <&bus_dmc>; > + status = "okay"; > +}; > + > +&bus_c2c { > + devfreq = <&bus_dmc>; > + status = "okay"; > +}; > + > +&bus_leftbus { > + devfreq-events = <&ppmu_leftbus_3>, <&ppmu_rightbus_3>; > + vdd-supply = <&buck3_reg>; > + status = "okay"; > +}; > + > +&bus_rightbus { > + devfreq = <&bus_leftbus>; > + status = "okay"; > +}; > + > +&bus_display { > + devfreq = <&bus_leftbus>; > + status = "okay"; > +}; > + > +&bus_fsys { > + devfreq = <&bus_leftbus>; > + status = "okay"; > +}; > + > +&bus_peri { > + devfreq = <&bus_leftbus>; > + status = "okay"; > +}; > + > +&bus_mfc { > + devfreq = <&bus_leftbus>; > + status = "okay"; > +}; > + > +&cpu0 { > + cpu0-supply = <&buck2_reg>; > +}; > + > +&csis_0 { > + status = "okay"; > + vddcore-supply = <&ldo8_reg>; > + vddio-supply = <&ldo10_reg>; > + assigned-clocks = <&clock CLK_MOUT_CSIS0>, > + <&clock CLK_SCLK_CSIS0>; > + assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>; > + assigned-clock-rates = <0>, <176000000>; > + > + /* Camera C (3) MIPI CSI-2 (CSIS0) */ > + port@3 { > + reg = <3>; > + csis0_ep: endpoint { > + remote-endpoint = <&s5c73m3_ep>; > + data-lanes = <1 2 3 4>; > + samsung,csis-hs-settle = <12>; > + }; > + }; > +}; > + > +&csis_1 { > + status = "okay"; > + vddcore-supply = <&ldo8_reg>; > + vddio-supply = <&ldo10_reg>; > + assigned-clocks = <&clock CLK_MOUT_CSIS1>, > + <&clock CLK_SCLK_CSIS1>; > + assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>; > + assigned-clock-rates = <0>, <176000000>; > + > + /* Camera D (4) MIPI CSI-2 (CSIS1) */ > + port@4 { > + reg = <4>; > + csis1_ep: endpoint { > + remote-endpoint = <&is_s5k6a3_ep>; > + data-lanes = <1>; > + samsung,csis-hs-settle = <18>; > + samsung,csis-wclk; > + }; > + }; > +}; > + > +&exynos_usbphy { > + vbus-supply = <&esafeout1_reg>; > + status = "okay"; > +}; > + > +&fimc_0 { > + status = "okay"; > + assigned-clocks = <&clock CLK_MOUT_FIMC0>, > + <&clock CLK_SCLK_FIMC0>; > + assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>; > + assigned-clock-rates = <0>, <176000000>; > +}; > + > +&fimc_1 { > + status = "okay"; > + assigned-clocks = <&clock CLK_MOUT_FIMC1>, > + <&clock CLK_SCLK_FIMC1>; > + assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>; > + assigned-clock-rates = <0>, <176000000>; > +}; > + > +&fimc_2 { > + status = "okay"; > + assigned-clocks = <&clock CLK_MOUT_FIMC2>, > + <&clock CLK_SCLK_FIMC2>; > + assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>; > + assigned-clock-rates = <0>, <176000000>; > +}; > + > +&fimc_3 { > + status = "okay"; > + assigned-clocks = <&clock CLK_MOUT_FIMC3>, > + <&clock CLK_SCLK_FIMC3>; > + assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>; > + assigned-clock-rates = <0>, <176000000>; > +}; > + > +&fimc_is { > + pinctrl-0 = <&fimc_is_uart>; > + pinctrl-names = "default"; > + status = "okay"; > + > + i2c1_isp: i2c-isp@12140000 { > + pinctrl-0 = <&fimc_is_i2c1>; > + pinctrl-names = "default"; > + > + s5k6a3@10 { > + compatible = "samsung,s5k6a3"; > + reg = <0x10>; > + svdda-supply = <&cam_io_reg>; > + svddio-supply = <&ldo19_reg>; > + afvdd-supply = <&ldo19_reg>; > + clock-frequency = <24000000>; > + /* CAM_B_CLKOUT */ > + clocks = <&camera 1>; > + clock-names = "extclk"; > + samsung,camclk-out = <1>; > + gpios = <&gpm1 6 GPIO_ACTIVE_HIGH>; > + > + port { > + is_s5k6a3_ep: endpoint { > + remote-endpoint = <&csis1_ep>; > + data-lanes = <1>; > + }; > + }; > + }; > + }; > +}; > + > +&fimc_lite_0 { > + status = "okay"; > +}; > + > +&fimc_lite_1 { > + status = "okay"; > +}; > + > +&fimd { > + status = "okay"; > +}; > + > +&hdmi { > + hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>; > + pinctrl-names = "default"; > + pinctrl-0 = <&hdmi_hpd>; > + vdd-supply = <&ldo3_reg>; > + vdd_osc-supply = <&ldo4_reg>; > + vdd_pll-supply = <&ldo3_reg>; > + ddc = <&i2c_5>; > + status = "okay"; > + > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > + > + port@1 { > + reg = <1>; > + hdmi_to_mhl: endpoint { > + remote-endpoint = <&mhl_to_hdmi>; > + }; > + }; > + }; > +}; > + > +&hsotg { > + vusb_d-supply = <&ldo15_reg>; > + vusb_a-supply = <&ldo12_reg>; > + dr_mode = "peripheral"; > + status = "okay"; > +}; > + > +&i2c_0 { > + samsung,i2c-sda-delay = <100>; > + samsung,i2c-slave-addr = <0x10>; > + samsung,i2c-max-bus-freq = <400000>; > + pinctrl-0 = <&i2c0_bus>; > + pinctrl-names = "default"; > + > + status = "disabled"; > + > + s5c73m3@3c { > + compatible = "samsung,s5c73m3"; > + reg = <0x3c>; > + standby-gpios = <&gpm0 1 GPIO_ACTIVE_LOW>; /* ISP_STANDBY */ > + xshutdown-gpios = <&gpf1 3 GPIO_ACTIVE_LOW>; /* ISP_RESET */ > + vdd-int-supply = <&buck9_reg>; > + vddio-cis-supply = <&ldo9_reg>; > + vdda-supply = <&ldo17_reg>; > + vddio-host-supply = <&ldo18_reg>; > + vdd-af-supply = <&cam_af_reg>; > + vdd-reg-supply = <&cam_io_reg>; > + clock-frequency = <24000000>; > + /* CAM_A_CLKOUT */ > + clocks = <&camera 0>; > + clock-names = "cis_extclk"; > + port { > + s5c73m3_ep: endpoint { > + remote-endpoint = <&csis0_ep>; > + data-lanes = <1 2 3 4>; > + }; > + }; > + }; > +}; > + > +&i2c_4 { > + samsung,i2c-sda-delay = <100>; > + samsung,i2c-slave-addr = <0x10>; > + samsung,i2c-max-bus-freq = <100000>; > + pinctrl-0 = <&i2c4_bus>; > + pinctrl-names = "default"; > + status = "okay"; > + > + wm1811: wm1811@1a { > + compatible = "wlf,wm1811"; > + reg = <0x1a>; > + clocks = <&pmu_system_controller 0>; > + clock-names = "MCLK1"; > + DCVDD-supply = <&ldo3_reg>; > + DBVDD1-supply = <&ldo3_reg>; > + wlf,ldo1ena = <&gpj0 4 0>; > + }; > +}; > + > +&i2c_5 { > + status = "okay"; > +}; > + > +&i2c_7 { > + samsung,i2c-sda-delay = <100>; > + samsung,i2c-slave-addr = <0x10>; > + samsung,i2c-max-bus-freq = <100000>; > + pinctrl-0 = <&i2c7_bus>; > + pinctrl-names = "default"; > + status = "okay"; > + > + max77686: max77686_pmic@9 { > + compatible = "maxim,max77686"; > + interrupt-parent = <&gpx0>; > + interrupts = <7 IRQ_EDGE_TYPE_NONE>; > + reg = <0x09>; > + #clock-cells = <1>; > + > + voltage-regulators { > + ldo1_reg: LDO1 { > + regulator-name = "VALIVE_1.0V_AP"; > + regulator-min-microvolt = <1000000>; > + regulator-max-microvolt = <1000000>; > + regulator-always-on; > + }; > + > + ldo2_reg: LDO2 { > + regulator-name = "VM1M2_1.2V_AP"; > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <1200000>; > + regulator-always-on; > + regulator-state-mem { > + regulator-on-in-suspend; > + }; > + }; > + > + ldo3_reg: LDO3 { > + regulator-name = "VCC_1.8V_AP"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-always-on; > + }; > + > + ldo4_reg: LDO4 { > + regulator-name = "VCC_2.8V_AP"; > + regulator-min-microvolt = <2800000>; > + regulator-max-microvolt = <2800000>; > + regulator-always-on; > + }; > + > + ldo5_reg: LDO5 { > + regulator-name = "VTOUCH_1.8V"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-always-on; > + }; > + > + ldo6_reg: LDO6 { > + regulator-name = "VMPLL_1.0V_AP"; > + regulator-min-microvolt = <1000000>; > + regulator-max-microvolt = <1000000>; > + regulator-always-on; > + regulator-state-mem { > + regulator-on-in-suspend; > + }; > + }; > + > + ldo7_reg: LDO7 { > + regulator-name = "VPLL_1.0V_AP"; > + regulator-min-microvolt = <1000000>; > + regulator-max-microvolt = <1000000>; > + regulator-always-on; > + regulator-state-mem { > + regulator-on-in-suspend; > + }; > + }; > + > + ldo8_reg: LDO8 { > + regulator-name = "VMIPI_1.0V"; > + regulator-min-microvolt = <1000000>; > + regulator-max-microvolt = <1000000>; > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + ldo9_reg: LDO9 { > + regulator-name = "CAM_ISP_MIPI_1.2V"; > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <1200000>; > + }; > + > + ldo10_reg: LDO10 { > + regulator-name = "VMIPI_1.8V"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + ldo11_reg: LDO11 { > + regulator-name = "VABB1_1.95V"; > + regulator-min-microvolt = <1950000>; > + regulator-max-microvolt = <1950000>; > + regulator-always-on; > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + ldo12_reg: LDO12 { > + regulator-name = "VUOTG_3.0V"; > + regulator-min-microvolt = <3000000>; > + regulator-max-microvolt = <3000000>; > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + ldo13_reg: LDO13 { > + status = "disabled"; > + }; > + > + ldo14_reg: LDO14 { > + regulator-name = "VABB2_1.95V"; > + regulator-min-microvolt = <1950000>; > + regulator-max-microvolt = <1950000>; > + regulator-always-on; > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + ldo15_reg: LDO15 { > + regulator-name = "VHSIC_1.0V"; > + regulator-min-microvolt = <1000000>; > + regulator-max-microvolt = <1000000>; > + regulator-state-mem { > + regulator-on-in-suspend; > + }; > + }; > + > + ldo16_reg: LDO16 { > + regulator-name = "VHSIC_1.8V"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-state-mem { > + regulator-on-in-suspend; > + }; > + }; > + > + ldo17_reg: LDO17 { > + status = "disabled"; > + }; > + > + ldo18_reg: LDO18 { > + regulator-name = "CAM_ISP_SENSOR_IO_1.8V"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + }; > + > + ldo19_reg: LDO19 { > + regulator-name = "VT_CAM_1.8V"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + }; > + > + ldo20_reg: LDO20 { > + regulator-name = "VDDQ_PRE_1.8V"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + }; > + > + ldo21_reg: LDO21 { > + regulator-name = "VTF_2.8V"; > + regulator-min-microvolt = <2800000>; > + regulator-max-microvolt = <2800000>; > + maxim,ena-gpios = <&gpy2 0 GPIO_ACTIVE_HIGH>; > + }; > + > + ldo22_reg: LDO22 { > + regulator-name = "VMEM_VDD_2.8V"; > + regulator-min-microvolt = <2800000>; > + regulator-max-microvolt = <2800000>; > + maxim,ena-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>; > + }; > + > + ldo23_reg: LDO23 { > + regulator-name = "TSP_AVDD_3.3V"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + }; > + > + ldo24_reg: LDO24 { > + regulator-name = "TSP_VDD_1.8V"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + }; > + > + ldo25_reg: LDO25 { > + status = "disabled"; > + }; > + > + ldo26_reg: LDO26 { > + regulator-name = "MOTOR_VCC_3.0V"; > + regulator-min-microvolt = <3000000>; > + regulator-max-microvolt = <3000000>; > + }; > + > + buck1_reg: BUCK1 { > + regulator-name = "vdd_mif"; > + regulator-min-microvolt = <850000>; > + regulator-max-microvolt = <1100000>; > + regulator-always-on; > + regulator-boot-on; > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + buck2_reg: BUCK2 { > + regulator-name = "vdd_arm"; > + regulator-min-microvolt = <850000>; > + regulator-max-microvolt = <1500000>; > + regulator-always-on; > + regulator-boot-on; > + regulator-state-mem { > + regulator-on-in-suspend; > + }; > + }; > + > + buck3_reg: BUCK3 { > + regulator-name = "vdd_int"; > + regulator-min-microvolt = <850000>; > + regulator-max-microvolt = <1150000>; > + regulator-always-on; > + regulator-boot-on; > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + buck4_reg: BUCK4 { > + regulator-name = "vdd_g3d"; > + regulator-min-microvolt = <850000>; > + regulator-max-microvolt = <1150000>; > + regulator-boot-on; > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + buck5_reg: BUCK5 { > + regulator-name = "VMEM_1.2V_AP"; > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <1200000>; > + regulator-always-on; > + }; > + > + buck6_reg: BUCK6 { > + regulator-name = "VCC_SUB_1.35V"; > + regulator-min-microvolt = <1350000>; > + regulator-max-microvolt = <1350000>; > + regulator-always-on; > + }; > + > + buck7_reg: BUCK7 { > + regulator-name = "VCC_SUB_2.0V"; > + regulator-min-microvolt = <2000000>; > + regulator-max-microvolt = <2000000>; > + regulator-always-on; > + }; > + > + buck8_reg: BUCK8 { > + regulator-name = "VMEM_VDDF_3.0V"; > + regulator-min-microvolt = <2850000>; > + regulator-max-microvolt = <2850000>; > + maxim,ena-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>; > + }; > + > + buck9_reg: BUCK9 { > + regulator-name = "CAM_ISP_CORE_1.2V"; > + regulator-min-microvolt = <1000000>; > + regulator-max-microvolt = <1200000>; > + }; > + }; > + }; > +}; > + > +&i2c_8 { > + status = "okay"; > +}; > + > +&i2s0 { > + pinctrl-0 = <&i2s0_bus>; > + pinctrl-names = "default"; > + status = "okay"; > +}; > + > +&mixer { > + status = "okay"; > +}; > + > +&mshc_0 { > + broken-cd; > + non-removable; > + card-detect-delay = <200>; > + vmmc-supply = <&ldo22_reg>; > + clock-frequency = <400000000>; > + samsung,dw-mshc-ciu-div = <0>; > + samsung,dw-mshc-sdr-timing = <2 3>; > + samsung,dw-mshc-ddr-timing = <1 2>; > + pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>; > + pinctrl-names = "default"; > + status = "okay"; > + bus-width = <8>; > + cap-mmc-highspeed; > +}; > + > +&pmu_system_controller { > + assigned-clocks = <&pmu_system_controller 0>; > + assigned-clock-parents = <&clock CLK_XUSBXTI>; > +}; > + > +&pinctrl_0 { > + pinctrl-names = "default"; > + pinctrl-0 = <&sleep0>; > + > + mhl_int: mhl-int { > + samsung,pins = "gpf3-5"; > + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; > + }; > + > + i2c_mhl_bus: i2c-mhl-bus { > + samsung,pins = "gpf0-4", "gpf0-6"; > + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; > + samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>; > + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; > + }; > + > + sleep0: sleep-states { > + PIN_SLP(gpa0-0, INPUT, NONE); > + PIN_SLP(gpa0-1, OUT0, NONE); > + PIN_SLP(gpa0-2, INPUT, NONE); > + PIN_SLP(gpa0-3, INPUT, UP); > + PIN_SLP(gpa0-4, INPUT, NONE); > + PIN_SLP(gpa0-5, INPUT, DOWN); > + PIN_SLP(gpa0-6, INPUT, DOWN); > + PIN_SLP(gpa0-7, INPUT, UP); > + > + PIN_SLP(gpa1-0, INPUT, DOWN); > + PIN_SLP(gpa1-1, INPUT, DOWN); > + PIN_SLP(gpa1-2, INPUT, DOWN); > + PIN_SLP(gpa1-3, INPUT, DOWN); > + PIN_SLP(gpa1-4, INPUT, DOWN); > + PIN_SLP(gpa1-5, INPUT, DOWN); > + > + PIN_SLP(gpb-0, INPUT, NONE); > + PIN_SLP(gpb-1, INPUT, NONE); > + PIN_SLP(gpb-2, INPUT, NONE); > + PIN_SLP(gpb-3, INPUT, NONE); > + PIN_SLP(gpb-4, INPUT, DOWN); > + PIN_SLP(gpb-5, INPUT, UP); > + PIN_SLP(gpb-6, INPUT, DOWN); > + PIN_SLP(gpb-7, INPUT, DOWN); > + > + PIN_SLP(gpc0-0, INPUT, DOWN); > + PIN_SLP(gpc0-1, INPUT, DOWN); > + PIN_SLP(gpc0-2, INPUT, DOWN); > + PIN_SLP(gpc0-3, INPUT, DOWN); > + PIN_SLP(gpc0-4, INPUT, DOWN); > + > + PIN_SLP(gpc1-0, INPUT, NONE); > + PIN_SLP(gpc1-1, PREV, NONE); > + PIN_SLP(gpc1-2, INPUT, NONE); > + PIN_SLP(gpc1-3, INPUT, NONE); > + PIN_SLP(gpc1-4, INPUT, NONE); > + > + PIN_SLP(gpd0-0, INPUT, DOWN); > + PIN_SLP(gpd0-1, INPUT, DOWN); > + PIN_SLP(gpd0-2, INPUT, NONE); > + PIN_SLP(gpd0-3, INPUT, NONE); > + > + PIN_SLP(gpd1-0, INPUT, DOWN); > + PIN_SLP(gpd1-1, INPUT, DOWN); > + PIN_SLP(gpd1-2, INPUT, NONE); > + PIN_SLP(gpd1-3, INPUT, NONE); > + > + PIN_SLP(gpf0-0, INPUT, NONE); > + PIN_SLP(gpf0-1, INPUT, NONE); > + PIN_SLP(gpf0-2, INPUT, DOWN); > + PIN_SLP(gpf0-3, INPUT, DOWN); > + PIN_SLP(gpf0-4, INPUT, NONE); > + PIN_SLP(gpf0-5, INPUT, DOWN); > + PIN_SLP(gpf0-6, INPUT, NONE); > + PIN_SLP(gpf0-7, INPUT, DOWN); > + > + PIN_SLP(gpf1-0, INPUT, DOWN); > + PIN_SLP(gpf1-1, INPUT, DOWN); > + PIN_SLP(gpf1-2, INPUT, DOWN); > + PIN_SLP(gpf1-3, INPUT, DOWN); > + PIN_SLP(gpf1-4, INPUT, NONE); > + PIN_SLP(gpf1-5, INPUT, NONE); > + PIN_SLP(gpf1-6, INPUT, DOWN); > + PIN_SLP(gpf1-7, PREV, NONE); > + > + PIN_SLP(gpf2-0, PREV, NONE); > + PIN_SLP(gpf2-1, INPUT, DOWN); > + PIN_SLP(gpf2-2, INPUT, DOWN); > + PIN_SLP(gpf2-3, INPUT, DOWN); > + PIN_SLP(gpf2-4, INPUT, DOWN); > + PIN_SLP(gpf2-5, INPUT, DOWN); > + PIN_SLP(gpf2-6, INPUT, NONE); > + PIN_SLP(gpf2-7, INPUT, NONE); > + > + PIN_SLP(gpf3-0, INPUT, NONE); > + PIN_SLP(gpf3-1, PREV, NONE); > + PIN_SLP(gpf3-2, PREV, NONE); > + PIN_SLP(gpf3-3, PREV, NONE); > + PIN_SLP(gpf3-4, OUT1, NONE); > + PIN_SLP(gpf3-5, INPUT, DOWN); > + > + PIN_SLP(gpj0-0, PREV, NONE); > + PIN_SLP(gpj0-1, PREV, NONE); > + PIN_SLP(gpj0-2, PREV, NONE); > + PIN_SLP(gpj0-3, INPUT, DOWN); > + PIN_SLP(gpj0-4, PREV, NONE); > + PIN_SLP(gpj0-5, PREV, NONE); > + PIN_SLP(gpj0-6, INPUT, DOWN); > + PIN_SLP(gpj0-7, INPUT, DOWN); > + > + PIN_SLP(gpj1-0, INPUT, DOWN); > + PIN_SLP(gpj1-1, PREV, NONE); > + PIN_SLP(gpj1-2, PREV, NONE); > + PIN_SLP(gpj1-3, INPUT, DOWN); > + PIN_SLP(gpj1-4, INPUT, DOWN); > + }; > +}; > + > +&pinctrl_1 { > + pinctrl-names = "default"; > + pinctrl-0 = <&sleep1>; > + > + hdmi_hpd: hdmi-hpd { > + samsung,pins = "gpx3-7"; > + samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>; > + }; > + > + sleep1: sleep-states { > + PIN_SLP(gpk0-0, PREV, NONE); > + PIN_SLP(gpk0-1, PREV, NONE); > + PIN_SLP(gpk0-2, OUT0, NONE); > + PIN_SLP(gpk0-3, PREV, NONE); > + PIN_SLP(gpk0-4, PREV, NONE); > + PIN_SLP(gpk0-5, PREV, NONE); > + PIN_SLP(gpk0-6, PREV, NONE); > + > + PIN_SLP(gpk1-0, INPUT, DOWN); > + PIN_SLP(gpk1-1, INPUT, DOWN); > + PIN_SLP(gpk1-2, INPUT, DOWN); > + PIN_SLP(gpk1-3, PREV, NONE); > + PIN_SLP(gpk1-4, PREV, NONE); > + PIN_SLP(gpk1-5, PREV, NONE); > + PIN_SLP(gpk1-6, PREV, NONE); > + > + PIN_SLP(gpk2-0, INPUT, DOWN); > + PIN_SLP(gpk2-1, INPUT, DOWN); > + PIN_SLP(gpk2-2, INPUT, DOWN); > + PIN_SLP(gpk2-3, INPUT, DOWN); > + PIN_SLP(gpk2-4, INPUT, DOWN); > + PIN_SLP(gpk2-5, INPUT, DOWN); > + PIN_SLP(gpk2-6, INPUT, DOWN); > + > + PIN_SLP(gpk3-0, OUT0, NONE); > + PIN_SLP(gpk3-1, INPUT, NONE); > + PIN_SLP(gpk3-2, INPUT, DOWN); > + PIN_SLP(gpk3-3, INPUT, NONE); > + PIN_SLP(gpk3-4, INPUT, NONE); > + PIN_SLP(gpk3-5, INPUT, NONE); > + PIN_SLP(gpk3-6, INPUT, NONE); > + > + PIN_SLP(gpl0-0, INPUT, DOWN); > + PIN_SLP(gpl0-1, INPUT, DOWN); > + PIN_SLP(gpl0-2, INPUT, DOWN); > + PIN_SLP(gpl0-3, INPUT, DOWN); > + PIN_SLP(gpl0-4, PREV, NONE); > + PIN_SLP(gpl0-6, PREV, NONE); > + > + PIN_SLP(gpl1-0, INPUT, DOWN); > + PIN_SLP(gpl1-1, INPUT, DOWN); > + PIN_SLP(gpl2-0, INPUT, DOWN); > + PIN_SLP(gpl2-1, INPUT, DOWN); > + PIN_SLP(gpl2-2, INPUT, DOWN); > + PIN_SLP(gpl2-3, INPUT, DOWN); > + PIN_SLP(gpl2-4, INPUT, DOWN); > + PIN_SLP(gpl2-5, INPUT, DOWN); > + PIN_SLP(gpl2-6, PREV, NONE); > + PIN_SLP(gpl2-7, INPUT, DOWN); > + > + PIN_SLP(gpm0-0, INPUT, DOWN); > + PIN_SLP(gpm0-1, INPUT, DOWN); > + PIN_SLP(gpm0-2, INPUT, DOWN); > + PIN_SLP(gpm0-3, INPUT, DOWN); > + PIN_SLP(gpm0-4, INPUT, DOWN); > + PIN_SLP(gpm0-5, INPUT, DOWN); > + PIN_SLP(gpm0-6, INPUT, DOWN); > + PIN_SLP(gpm0-7, INPUT, DOWN); > + > + PIN_SLP(gpm1-0, INPUT, DOWN); > + PIN_SLP(gpm1-1, INPUT, DOWN); > + PIN_SLP(gpm1-2, INPUT, NONE); > + PIN_SLP(gpm1-3, INPUT, NONE); > + PIN_SLP(gpm1-4, INPUT, NONE); > + PIN_SLP(gpm1-5, INPUT, NONE); > + PIN_SLP(gpm1-6, INPUT, DOWN); > + > + PIN_SLP(gpm2-0, INPUT, NONE); > + PIN_SLP(gpm2-1, INPUT, NONE); > + PIN_SLP(gpm2-2, INPUT, DOWN); > + PIN_SLP(gpm2-3, INPUT, DOWN); > + PIN_SLP(gpm2-4, INPUT, DOWN); > + > + PIN_SLP(gpm3-0, PREV, NONE); > + PIN_SLP(gpm3-1, PREV, NONE); > + PIN_SLP(gpm3-2, PREV, NONE); > + PIN_SLP(gpm3-3, OUT1, NONE); > + PIN_SLP(gpm3-4, INPUT, DOWN); > + PIN_SLP(gpm3-5, INPUT, DOWN); > + PIN_SLP(gpm3-6, INPUT, DOWN); > + PIN_SLP(gpm3-7, INPUT, DOWN); > + > + PIN_SLP(gpm4-0, INPUT, DOWN); > + PIN_SLP(gpm4-1, INPUT, DOWN); > + PIN_SLP(gpm4-2, INPUT, DOWN); > + PIN_SLP(gpm4-3, INPUT, DOWN); > + PIN_SLP(gpm4-4, INPUT, DOWN); > + PIN_SLP(gpm4-5, INPUT, DOWN); > + PIN_SLP(gpm4-6, INPUT, DOWN); > + PIN_SLP(gpm4-7, INPUT, DOWN); > + > + PIN_SLP(gpy0-0, INPUT, DOWN); > + PIN_SLP(gpy0-1, INPUT, DOWN); > + PIN_SLP(gpy0-2, INPUT, DOWN); > + PIN_SLP(gpy0-3, INPUT, DOWN); > + PIN_SLP(gpy0-4, INPUT, DOWN); > + PIN_SLP(gpy0-5, INPUT, DOWN); > + > + PIN_SLP(gpy1-0, INPUT, DOWN); > + PIN_SLP(gpy1-1, INPUT, DOWN); > + PIN_SLP(gpy1-2, INPUT, DOWN); > + PIN_SLP(gpy1-3, INPUT, DOWN); > + > + PIN_SLP(gpy2-0, PREV, NONE); > + PIN_SLP(gpy2-1, INPUT, DOWN); > + PIN_SLP(gpy2-2, INPUT, NONE); > + PIN_SLP(gpy2-3, INPUT, NONE); > + PIN_SLP(gpy2-4, INPUT, NONE); > + PIN_SLP(gpy2-5, INPUT, NONE); > + > + PIN_SLP(gpy3-0, INPUT, DOWN); > + PIN_SLP(gpy3-1, INPUT, DOWN); > + PIN_SLP(gpy3-2, INPUT, DOWN); > + PIN_SLP(gpy3-3, INPUT, DOWN); > + PIN_SLP(gpy3-4, INPUT, DOWN); > + PIN_SLP(gpy3-5, INPUT, DOWN); > + PIN_SLP(gpy3-6, INPUT, DOWN); > + PIN_SLP(gpy3-7, INPUT, DOWN); > + > + PIN_SLP(gpy4-0, INPUT, DOWN); > + PIN_SLP(gpy4-1, INPUT, DOWN); > + PIN_SLP(gpy4-2, INPUT, DOWN); > + PIN_SLP(gpy4-3, INPUT, DOWN); > + PIN_SLP(gpy4-4, INPUT, DOWN); > + PIN_SLP(gpy4-5, INPUT, DOWN); > + PIN_SLP(gpy4-6, INPUT, DOWN); > + PIN_SLP(gpy4-7, INPUT, DOWN); > + > + PIN_SLP(gpy5-0, INPUT, DOWN); > + PIN_SLP(gpy5-1, INPUT, DOWN); > + PIN_SLP(gpy5-2, INPUT, DOWN); > + PIN_SLP(gpy5-3, INPUT, DOWN); > + PIN_SLP(gpy5-4, INPUT, DOWN); > + PIN_SLP(gpy5-5, INPUT, DOWN); > + PIN_SLP(gpy5-6, INPUT, DOWN); > + PIN_SLP(gpy5-7, INPUT, DOWN); > + > + PIN_SLP(gpy6-0, INPUT, DOWN); > + PIN_SLP(gpy6-1, INPUT, DOWN); > + PIN_SLP(gpy6-2, INPUT, DOWN); > + PIN_SLP(gpy6-3, INPUT, DOWN); > + PIN_SLP(gpy6-4, INPUT, DOWN); > + PIN_SLP(gpy6-5, INPUT, DOWN); > + PIN_SLP(gpy6-6, INPUT, DOWN); > + PIN_SLP(gpy6-7, INPUT, DOWN); > + }; > +}; > + > +&pinctrl_2 { > + pinctrl-names = "default"; > + pinctrl-0 = <&sleep2>; > + > + sleep2: sleep-states { > + PIN_SLP(gpz-0, INPUT, DOWN); > + PIN_SLP(gpz-1, INPUT, DOWN); > + PIN_SLP(gpz-2, INPUT, DOWN); > + PIN_SLP(gpz-3, INPUT, DOWN); > + PIN_SLP(gpz-4, INPUT, DOWN); > + PIN_SLP(gpz-5, INPUT, DOWN); > + PIN_SLP(gpz-6, INPUT, DOWN); > + }; > +}; > + > +&pinctrl_3 { > + pinctrl-names = "default"; > + pinctrl-0 = <&sleep3>; > + > + sleep3: sleep-states { > + PIN_SLP(gpv0-0, INPUT, DOWN); > + PIN_SLP(gpv0-1, INPUT, DOWN); > + PIN_SLP(gpv0-2, INPUT, DOWN); > + PIN_SLP(gpv0-3, INPUT, DOWN); > + PIN_SLP(gpv0-4, INPUT, DOWN); > + PIN_SLP(gpv0-5, INPUT, DOWN); > + PIN_SLP(gpv0-6, INPUT, DOWN); > + PIN_SLP(gpv0-7, INPUT, DOWN); > + > + PIN_SLP(gpv1-0, INPUT, DOWN); > + PIN_SLP(gpv1-1, INPUT, DOWN); > + PIN_SLP(gpv1-2, INPUT, DOWN); > + PIN_SLP(gpv1-3, INPUT, DOWN); > + PIN_SLP(gpv1-4, INPUT, DOWN); > + PIN_SLP(gpv1-5, INPUT, DOWN); > + PIN_SLP(gpv1-6, INPUT, DOWN); > + PIN_SLP(gpv1-7, INPUT, DOWN); > + > + PIN_SLP(gpv2-0, INPUT, DOWN); > + PIN_SLP(gpv2-1, INPUT, DOWN); > + PIN_SLP(gpv2-2, INPUT, DOWN); > + PIN_SLP(gpv2-3, INPUT, DOWN); > + PIN_SLP(gpv2-4, INPUT, DOWN); > + PIN_SLP(gpv2-5, INPUT, DOWN); > + PIN_SLP(gpv2-6, INPUT, DOWN); > + PIN_SLP(gpv2-7, INPUT, DOWN); > + > + PIN_SLP(gpv3-0, INPUT, DOWN); > + PIN_SLP(gpv3-1, INPUT, DOWN); > + PIN_SLP(gpv3-2, INPUT, DOWN); > + PIN_SLP(gpv3-3, INPUT, DOWN); > + PIN_SLP(gpv3-4, INPUT, DOWN); > + PIN_SLP(gpv3-5, INPUT, DOWN); > + PIN_SLP(gpv3-6, INPUT, DOWN); > + PIN_SLP(gpv3-7, INPUT, DOWN); > + > + PIN_SLP(gpv4-0, INPUT, DOWN); > + }; > +}; > + > +&pwm { > + pinctrl-0 = <&pwm0_out>; > + pinctrl-names = "default"; > + samsung,pwm-outputs = <0>; > + status = "okay"; > +}; > + > +&rtc { > + status = "okay"; > + clocks = <&clock CLK_RTC>, <&max77686 MAX77686_CLK_AP>; > + clock-names = "rtc", "rtc_src"; > +}; > + > +&sdhci_2 { > + bus-width = <4>; > + cd-gpios = <&gpx3 4 GPIO_ACTIVE_HIGH>; > + cd-inverted; > + pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4>; > + pinctrl-names = "default"; > + vmmc-supply = <&ldo21_reg>; > + status = "okay"; > +}; > + > +&sdhci_3 { > + #address-cells = <1>; > + #size-cells = <0>; > + pinctrl-names = "default"; > + pinctrl-0 = <&sd3_clk &sd3_cmd &sd3_bus4>; > + > + broken-cd; > + > + mmc-pwrseq = <&wlan_pwrseq>; > + > + bus-width = <4>; > + status = "okay"; > + > + brcmf: wifi@1 { > + reg = <1>; > + compatible = "brcm,bcm4329-fmac"; > + interrupt-parent = <&gpx2>; > + interrupts = <5 IRQ_TYPE_NONE>; > + interrupt-names = "host-wake"; > + }; > +}; > + > +&serial_0 { > + status = "okay"; > +}; > + > +&serial_1 { > + status = "okay"; > +}; > + > +&serial_2 { > + status = "okay"; > +}; > + > +&serial_3 { > + status = "okay"; > +}; > + > +&sleep0 { > + gpf1-0 { > + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; > + samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>; > + }; > +}; > + > +&spi_1 { > + pinctrl-names = "default"; > + pinctrl-0 = <&spi1_bus>; > + cs-gpios = <&gpb 5 GPIO_ACTIVE_HIGH>; > + status = "okay"; > + > + s5c73m3_spi: s5c73m3@0 { > + compatible = "samsung,s5c73m3"; > + spi-max-frequency = <50000000>; > + reg = <0>; > + controller-data { > + samsung,spi-feedback-delay = <2>; > + }; > + }; > +}; > + > +&tmu { > + vtmu-supply = <&ldo10_reg>; > + status = "okay"; > +}; > + > +&pmu_system_controller { > + compatible = "samsung,exynos4210-pmu", "syscon", "simple-mfd"; > + > + reboot-mode { > + compatible = "syscon-reboot-mode"; > + offset = <0x80c>; > + > + mode-normal = <0x12345670>; > + mode-bootloader = <0x12345671>; > + mode-download = <0x12345671>; > + mode-recovery = <0x12345674>; > + }; > +}; > diff --git a/arch/arm/boot/dts/exynos4412-t0.dts b/arch/arm/boot/dts/exynos4412-t0.dts > new file mode 100644 > index 000000000000..c49abe857b6f > --- /dev/null > +++ b/arch/arm/boot/dts/exynos4412-t0.dts > @@ -0,0 +1,51 @@ > +// SPDX-License-Identifier: GPL-2.0 > +/dts-v1/; > +#include "exynos4412-midas.dtsi" > + > +/ { > + compatible = "samsung,t0", "samsung,midas", "samsung,exynos4412", "samsung,exynos4"; > + model = "Samsung T0 (GT-N7100, GT-N7105) based on Exynos4412"; > + > + memory@40000000 { > + device_type = "memory"; > + reg = <0x40000000 0x80000000>; > + }; > + Unnecessary blank line. Best regards, Krzysztof -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Krzysztof, On 2017-12-14 09:48, Krzysztof Kozlowski wrote: > Hi Simon, > > Thanks for new boards! > > +Cc Marek, Bartlomiej, > > On Tue, Dec 12, 2017 at 3:08 PM, Simon Shields <simon@lineageos.org> wrote: >> "midas" is the codename for a family of smartphones released by Samsung >> Mobile. It includes the Galaxy S3 (GT-I9300/I9305) and the Galaxy >> Note 2 (GT-N7100/N7105). The boards largely have the same peripherals: >> the main differences are touchscreen, display panel and cellular modem. >> >> Signed-off-by: Simon Shields <simon@lineageos.org> >> --- >> arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi | 144 +++ >> arch/arm/boot/dts/exynos4412-m0.dts | 14 + >> arch/arm/boot/dts/exynos4412-m3.dts | 19 + >> arch/arm/boot/dts/exynos4412-midas.dtsi | 1291 +++++++++++++++++++++++++++ > M0 is essentially Trats2. You are duplicating here almost entire > Trats2 which means: > 1. A lot of duplicated code thus it will require more maintenance to > keep DTS synced, > 2. It is very difficult to spot the changes and possible errors > between Trats2 and Midas DTSI/M0. > > Please make a generic family of devices based on Midas, including > Trats2. You might make it in steps for easier review: > 1. Split common Trats2 part, > 2. Add new boards. Krzysztof is right. Trats2 should also be based on midas.dtsi (it is very similar to gt-i9300, the difference in mainly in the casing). We also used gt-i9300 with modified bootloader with Trats2 dts. It should not be hard to adapt it for common midas.dtsi base (hind: use scripts/dtc/dtx_diff for checking if the final dts is correct). > ... Best regards
diff --git a/arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi b/arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi new file mode 100644 index 000000000000..536195adfe65 --- /dev/null +++ b/arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi @@ -0,0 +1,144 @@ +// SPDX-License-Identifier: GPL-2.0 +/dts-v1/; +#include "exynos4412-midas.dtsi" + +/ { + regulators { + lcd_vdd3_reg: voltage-regulator-10 { + compatible = "regulator-fixed"; + regulator-name = "LCD_VDD_2.2V"; + regulator-min-microvolt = <2200000>; + regulator-max-microvolt = <2200000>; + enable-active-high; + gpio = <&gpc0 1 GPIO_ACTIVE_HIGH>; + }; + + ps_als_reg: voltage-regulator-11 { + compatible = "regulator-fixed"; + regulator-name = "LED_A_3.0V"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + enable-active-high; + gpio = <&gpj0 5 GPIO_ACTIVE_HIGH>; + }; + }; + + i2c_ak8975: i2c-gpio-10 { + compatible = "i2c-gpio"; + gpios = <&gpy2 4 GPIO_ACTIVE_HIGH>, <&gpy2 5 GPIO_ACTIVE_HIGH>; + i2c-gpio,delay-us = <2>; + #address-cells = <1>; + #size-cells = <0>; + + ak8975@c { + compatible = "asahi-kasei,ak8975"; + reg = <0x0c>; + gpios = <&gpj0 7 GPIO_ACTIVE_HIGH>; + }; + }; + + i2c_cm36651: i2c-gpio-11 { + compatible = "i2c-gpio"; + gpios = <&gpf0 0 GPIO_ACTIVE_LOW>, <&gpf0 1 GPIO_ACTIVE_LOW>; + i2c-gpio,delay-us = <2>; + #address-cells = <1>; + #size-cells = <0>; + + cm36651@18 { + compatible = "capella,cm36651"; + reg = <0x18>; + interrupt-parent = <&gpx0>; + interrupts = <2 IRQ_EDGE_TYPE_FALLING>; + vled-supply = <&ps_als_reg>; + }; + }; +}; + +&buck9_reg { + maxim,ena-gpios = <&gpm0 3 GPIO_ACTIVE_HIGH>; +}; + +&cam_af_reg { + gpio = <&gpm0 4 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&cam_io_reg { + gpio = <&gpm0 2 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&dsi_0 { + vddcore-supply = <&ldo8_reg>; + vddio-supply = <&ldo10_reg>; + samsung,burst-clock-frequency = <500000000>; + samsung,esc-clock-frequency = <20000000>; + samsung,pll-clock-frequency = <24000000>; + status = "okay"; + + panel@0 { + compatible = "samsung,s6e8aa0"; + reg = <0>; + vdd3-supply = <&lcd_vdd3_reg>; + vci-supply = <&ldo25_reg>; + reset-gpios = <&gpf2 1 GPIO_ACTIVE_HIGH>; + power-on-delay= <50>; + reset-delay = <100>; + init-delay = <100>; + flip-horizontal; + flip-vertical; + panel-width-mm = <58>; + panel-height-mm = <103>; + + display-timings { + timing-0 { + clock-frequency = <57153600>; + hactive = <720>; + vactive = <1280>; + hfront-porch = <5>; + hback-porch = <5>; + hsync-len = <5>; + vfront-porch = <13>; + vback-porch = <1>; + vsync-len = <2>; + }; + }; + }; +}; + +&i2c_0 { + status = "okay"; +}; + +&i2c_3 { + samsung,i2c-sda-delay = <100>; + samsung,i2c-slave-addr = <0x10>; + samsung,i2c-max-bus-freq = <400000>; + pinctrl-0 = <&i2c3_bus>; + pinctrl-names = "default"; + status = "okay"; + + mms114-touchscreen@48 { + compatible = "melfas,mms114"; + reg = <0x48>; + interrupt-parent = <&gpm2>; + interrupts = <3 IRQ_EDGE_TYPE_FALLING>; + x-size = <720>; + y-size = <1280>; + avdd-supply = <&ldo23_reg>; + vdd-supply = <&ldo24_reg>; + }; +}; + +&ldo17_reg { + regulator-name = "CAM_SENSOR_CORE_1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; +}; + +&ldo25_reg { + regulator-name = "LCD_VCC_3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; +}; + diff --git a/arch/arm/boot/dts/exynos4412-m0.dts b/arch/arm/boot/dts/exynos4412-m0.dts new file mode 100644 index 000000000000..18aff81682a9 --- /dev/null +++ b/arch/arm/boot/dts/exynos4412-m0.dts @@ -0,0 +1,14 @@ +// SPDX-License-Identifier: GPL-2.0 +/dts-v1/; +#include "exynos4412-galaxy-s3.dtsi" + +/ { + compatible = "samsung,m0", "samsung,midas", "samsung,exynos4412", "samsung,exynos4"; + model = "Samsung M0 (GT-I9300) based on Exynos4412"; + + memory@40000000 { + device_type = "memory"; + reg = <0x40000000 0x40000000>; + }; +}; + diff --git a/arch/arm/boot/dts/exynos4412-m3.dts b/arch/arm/boot/dts/exynos4412-m3.dts new file mode 100644 index 000000000000..e13ee49ad867 --- /dev/null +++ b/arch/arm/boot/dts/exynos4412-m3.dts @@ -0,0 +1,19 @@ +// SPDX-License-Identifier: GPL-2.0 +/dts-v1/; +#include "exynos4412-galaxy-s3.dtsi" + +/ { + compatible = "samsung,m3", "samsung,midas", "samsung,exynos4412", "samsung,exynos4"; + model = "Samsung M3 (GT-I9305) based on Exynos4412"; + + memory@40000000 { + device_type = "memory"; + reg = <0x40000000 0x80000000>; + }; +}; + +&i2c0_bus { + // SCL and SDA pins are swapped + samsung,pins = "gpd1-1", "gpd1-0"; +}; + diff --git a/arch/arm/boot/dts/exynos4412-midas.dtsi b/arch/arm/boot/dts/exynos4412-midas.dtsi new file mode 100644 index 000000000000..65c1e2d14d26 --- /dev/null +++ b/arch/arm/boot/dts/exynos4412-midas.dtsi @@ -0,0 +1,1291 @@ +// SPDX-License-Identifier: GPL-2.0 +/dts-v1/; +#include "exynos4412.dtsi" +#include "exynos4412-ppmu-common.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/clock/maxim,max77686.h> +#include <dt-bindings/pinctrl/samsung.h> + +/ { + compatible = "samsung,midas", "samsung,exynos4412", "samsung,exynos4"; + + aliases { + i2c9 = &i2c_max77693; + i2c10 = &i2c_max77693_fuel; + }; + + chosen { + stdout-path = &serial_2; + }; + + firmware@204f000 { + compatible = "samsung,secure-firmware"; + reg = <0x0204F000 0x1000>; + }; + + fixed-rate-clocks { + xxti { + compatible = "samsung,clock-xxti", "fixed-clock"; + clock-frequency = <0>; + }; + + xusbxti { + compatible = "samsung,clock-xusbxti", "fixed-clock"; + clock-frequency = <24000000>; + }; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + cam_io_reg: voltage-regulator-0 { + compatible = "regulator-fixed"; + regulator-name = "CAM_SENSOR_A"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + enable-active-high; + status = "disabled"; + }; + + cam_af_reg: voltage-regulator-1 { + compatible = "regulator-fixed"; + regulator-name = "CAM_AF"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + enable-active-high; + status = "disabled"; + }; + + vsil12: voltage-regulator-6 { + compatible = "regulator-fixed"; + regulator-name = "VSIL_1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + gpio = <&gpl0 4 GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&buck7_reg>; + }; + + vcc33mhl: voltage-regulator-7 { + compatible = "regulator-fixed"; + regulator-name = "VCC_3.3_MHL"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpl0 4 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + vcc18mhl: voltage-regulator-8 { + compatible = "regulator-fixed"; + regulator-name = "VCC_1.8_MHL"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + gpio = <&gpl0 4 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + }; + + gpio-keys { + compatible = "gpio-keys"; + + key-down { + gpios = <&gpx3 3 GPIO_ACTIVE_LOW>; + linux,code = <114>; + label = "volume down"; + debounce-interval = <10>; + }; + + key-up { + gpios = <&gpx2 2 GPIO_ACTIVE_LOW>; + linux,code = <115>; + label = "volume up"; + debounce-interval = <10>; + }; + + key-power { + gpios = <&gpx2 7 GPIO_ACTIVE_LOW>; + linux,code = <116>; + label = "power"; + debounce-interval = <10>; + wakeup-source; + }; + + key-home { + gpios = <&gpx0 1 GPIO_ACTIVE_LOW>; + linux,code = <172>; + label = "home"; + debounce-inteval = <10>; + wakeup-source; + }; + }; + + i2c_max77693: i2c-gpio-0 { + compatible = "i2c-gpio"; + gpios = <&gpm2 0 GPIO_ACTIVE_HIGH>, <&gpm2 1 GPIO_ACTIVE_HIGH>; + i2c-gpio,delay-us = <2>; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + max77693@66 { + compatible = "maxim,max77693"; + interrupt-parent = <&gpx1>; + interrupts = <5 IRQ_EDGE_TYPE_FALLING>; + reg = <0x66>; + + regulators { + esafeout1_reg: ESAFEOUT1 { + regulator-name = "ESAFEOUT1"; + }; + esafeout2_reg: ESAFEOUT2 { + regulator-name = "ESAFEOUT2"; + }; + charger_reg: CHARGER { + regulator-name = "CHARGER"; + regulator-min-microamp = <60000>; + regulator-max-microamp = <2580000>; + }; + }; + + max77693_haptic { + compatible = "maxim,max77693-haptic"; + haptic-supply = <&ldo26_reg>; + pwms = <&pwm 0 38022 0>; + }; + + charger { + compatible = "maxim,max77693-charger"; + + maxim,constant-microvolt = <4350000>; + maxim,min-system-microvolt = <3600000>; + maxim,thermal-regulation-celsius = <100>; + maxim,battery-overcurrent-microamp = <3500000>; + maxim,charge-input-threshold-microvolt = <4300000>; + }; + }; + }; + + i2c_max77693_fuel: i2c-gpio-1 { + compatible = "i2c-gpio"; + gpios = <&gpf1 5 GPIO_ACTIVE_HIGH>, <&gpf1 4 GPIO_ACTIVE_HIGH>; + i2c-gpio,delay-us = <2>; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + max77693-fuel-gauge@36 { + compatible = "maxim,max17047"; + interrupt-parent = <&gpx2>; + interrupts = <3 IRQ_TYPE_EDGE_FALLING>; + reg = <0x36>; + + maxim,over-heat-temp = <700>; + maxim,over-volt = <4500>; + }; + }; + + i2c-mhl { + compatible = "i2c-gpio"; + gpios = <&gpf0 4 GPIO_ACTIVE_HIGH>, <&gpf0 6 GPIO_ACTIVE_HIGH>; + i2c-gpio,delay-us = <100>; + #address-cells = <1>; + #size-cells = <0>; + + pinctrl-0 = <&i2c_mhl_bus>; + pinctrl-names = "default"; + status = "okay"; + + sii9234: hdmi-bridge@39 { + compatible = "sil,sii9234"; + avcc33-supply = <&vcc33mhl>; + iovcc18-supply = <&vcc18mhl>; + avcc12-supply = <&vsil12>; + cvcc12-supply = <&vsil12>; + reset-gpios = <&gpf3 4 GPIO_ACTIVE_LOW>; + interrupt-parent = <&gpf3>; + interrupts = <5 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x39>; + + port { + mhl_to_hdmi: endpoint { + remote-endpoint = <&hdmi_to_mhl>; + }; + }; + }; + }; + + camera: camera { + pinctrl-0 = <&cam_port_a_clk_active &cam_port_b_clk_active>; + pinctrl-names = "default"; + status = "okay"; + assigned-clocks = <&clock CLK_MOUT_CAM0>, + <&clock CLK_MOUT_CAM1>; + assigned-clock-parents = <&clock CLK_XUSBXTI>, + <&clock CLK_XUSBXTI>; + }; + + wlan_pwrseq: sdhci3-pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&gpj0 0 GPIO_ACTIVE_LOW>; + clocks = <&max77686 MAX77686_CLK_PMIC>; + clock-names = "ext_clock"; + }; + + thermistor-ap { + compatible = "murata,ncp15wb473"; + pullup-uv = <1800000>; /* VCC_1.8V_AP */ + pullup-ohm = <100000>; /* 100K */ + pulldown-ohm = <100000>; /* 100K */ + io-channels = <&adc 1>; /* AP temperature */ + }; + + thermistor-battery { + compatible = "murata,ncp15wb473"; + pullup-uv = <1800000>; /* VCC_1.8V_AP */ + pullup-ohm = <100000>; /* 100K */ + pulldown-ohm = <100000>; /* 100K */ + io-channels = <&adc 2>; /* Battery temperature */ + }; + + thermal-zones { + cpu_thermal: cpu-thermal { + cooling-maps { + map0 { + /* Corresponds to 800MHz at freq_table */ + cooling-device = <&cpu0 7 7>; + }; + map1 { + /* Corresponds to 200MHz at freq_table */ + cooling-device = <&cpu0 13 13>; + }; + }; + }; + }; + +}; + +&adc { + vdd-supply = <&ldo3_reg>; + status = "okay"; +}; + +&bus_dmc { + devfreq-events = <&ppmu_dmc0_3>, <&ppmu_dmc1_3>; + vdd-supply = <&buck1_reg>; + status = "okay"; +}; + +&bus_acp { + devfreq = <&bus_dmc>; + status = "okay"; +}; + +&bus_c2c { + devfreq = <&bus_dmc>; + status = "okay"; +}; + +&bus_leftbus { + devfreq-events = <&ppmu_leftbus_3>, <&ppmu_rightbus_3>; + vdd-supply = <&buck3_reg>; + status = "okay"; +}; + +&bus_rightbus { + devfreq = <&bus_leftbus>; + status = "okay"; +}; + +&bus_display { + devfreq = <&bus_leftbus>; + status = "okay"; +}; + +&bus_fsys { + devfreq = <&bus_leftbus>; + status = "okay"; +}; + +&bus_peri { + devfreq = <&bus_leftbus>; + status = "okay"; +}; + +&bus_mfc { + devfreq = <&bus_leftbus>; + status = "okay"; +}; + +&cpu0 { + cpu0-supply = <&buck2_reg>; +}; + +&csis_0 { + status = "okay"; + vddcore-supply = <&ldo8_reg>; + vddio-supply = <&ldo10_reg>; + assigned-clocks = <&clock CLK_MOUT_CSIS0>, + <&clock CLK_SCLK_CSIS0>; + assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>; + assigned-clock-rates = <0>, <176000000>; + + /* Camera C (3) MIPI CSI-2 (CSIS0) */ + port@3 { + reg = <3>; + csis0_ep: endpoint { + remote-endpoint = <&s5c73m3_ep>; + data-lanes = <1 2 3 4>; + samsung,csis-hs-settle = <12>; + }; + }; +}; + +&csis_1 { + status = "okay"; + vddcore-supply = <&ldo8_reg>; + vddio-supply = <&ldo10_reg>; + assigned-clocks = <&clock CLK_MOUT_CSIS1>, + <&clock CLK_SCLK_CSIS1>; + assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>; + assigned-clock-rates = <0>, <176000000>; + + /* Camera D (4) MIPI CSI-2 (CSIS1) */ + port@4 { + reg = <4>; + csis1_ep: endpoint { + remote-endpoint = <&is_s5k6a3_ep>; + data-lanes = <1>; + samsung,csis-hs-settle = <18>; + samsung,csis-wclk; + }; + }; +}; + +&exynos_usbphy { + vbus-supply = <&esafeout1_reg>; + status = "okay"; +}; + +&fimc_0 { + status = "okay"; + assigned-clocks = <&clock CLK_MOUT_FIMC0>, + <&clock CLK_SCLK_FIMC0>; + assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>; + assigned-clock-rates = <0>, <176000000>; +}; + +&fimc_1 { + status = "okay"; + assigned-clocks = <&clock CLK_MOUT_FIMC1>, + <&clock CLK_SCLK_FIMC1>; + assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>; + assigned-clock-rates = <0>, <176000000>; +}; + +&fimc_2 { + status = "okay"; + assigned-clocks = <&clock CLK_MOUT_FIMC2>, + <&clock CLK_SCLK_FIMC2>; + assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>; + assigned-clock-rates = <0>, <176000000>; +}; + +&fimc_3 { + status = "okay"; + assigned-clocks = <&clock CLK_MOUT_FIMC3>, + <&clock CLK_SCLK_FIMC3>; + assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>; + assigned-clock-rates = <0>, <176000000>; +}; + +&fimc_is { + pinctrl-0 = <&fimc_is_uart>; + pinctrl-names = "default"; + status = "okay"; + + i2c1_isp: i2c-isp@12140000 { + pinctrl-0 = <&fimc_is_i2c1>; + pinctrl-names = "default"; + + s5k6a3@10 { + compatible = "samsung,s5k6a3"; + reg = <0x10>; + svdda-supply = <&cam_io_reg>; + svddio-supply = <&ldo19_reg>; + afvdd-supply = <&ldo19_reg>; + clock-frequency = <24000000>; + /* CAM_B_CLKOUT */ + clocks = <&camera 1>; + clock-names = "extclk"; + samsung,camclk-out = <1>; + gpios = <&gpm1 6 GPIO_ACTIVE_HIGH>; + + port { + is_s5k6a3_ep: endpoint { + remote-endpoint = <&csis1_ep>; + data-lanes = <1>; + }; + }; + }; + }; +}; + +&fimc_lite_0 { + status = "okay"; +}; + +&fimc_lite_1 { + status = "okay"; +}; + +&fimd { + status = "okay"; +}; + +&hdmi { + hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&hdmi_hpd>; + vdd-supply = <&ldo3_reg>; + vdd_osc-supply = <&ldo4_reg>; + vdd_pll-supply = <&ldo3_reg>; + ddc = <&i2c_5>; + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + reg = <1>; + hdmi_to_mhl: endpoint { + remote-endpoint = <&mhl_to_hdmi>; + }; + }; + }; +}; + +&hsotg { + vusb_d-supply = <&ldo15_reg>; + vusb_a-supply = <&ldo12_reg>; + dr_mode = "peripheral"; + status = "okay"; +}; + +&i2c_0 { + samsung,i2c-sda-delay = <100>; + samsung,i2c-slave-addr = <0x10>; + samsung,i2c-max-bus-freq = <400000>; + pinctrl-0 = <&i2c0_bus>; + pinctrl-names = "default"; + + status = "disabled"; + + s5c73m3@3c { + compatible = "samsung,s5c73m3"; + reg = <0x3c>; + standby-gpios = <&gpm0 1 GPIO_ACTIVE_LOW>; /* ISP_STANDBY */ + xshutdown-gpios = <&gpf1 3 GPIO_ACTIVE_LOW>; /* ISP_RESET */ + vdd-int-supply = <&buck9_reg>; + vddio-cis-supply = <&ldo9_reg>; + vdda-supply = <&ldo17_reg>; + vddio-host-supply = <&ldo18_reg>; + vdd-af-supply = <&cam_af_reg>; + vdd-reg-supply = <&cam_io_reg>; + clock-frequency = <24000000>; + /* CAM_A_CLKOUT */ + clocks = <&camera 0>; + clock-names = "cis_extclk"; + port { + s5c73m3_ep: endpoint { + remote-endpoint = <&csis0_ep>; + data-lanes = <1 2 3 4>; + }; + }; + }; +}; + +&i2c_4 { + samsung,i2c-sda-delay = <100>; + samsung,i2c-slave-addr = <0x10>; + samsung,i2c-max-bus-freq = <100000>; + pinctrl-0 = <&i2c4_bus>; + pinctrl-names = "default"; + status = "okay"; + + wm1811: wm1811@1a { + compatible = "wlf,wm1811"; + reg = <0x1a>; + clocks = <&pmu_system_controller 0>; + clock-names = "MCLK1"; + DCVDD-supply = <&ldo3_reg>; + DBVDD1-supply = <&ldo3_reg>; + wlf,ldo1ena = <&gpj0 4 0>; + }; +}; + +&i2c_5 { + status = "okay"; +}; + +&i2c_7 { + samsung,i2c-sda-delay = <100>; + samsung,i2c-slave-addr = <0x10>; + samsung,i2c-max-bus-freq = <100000>; + pinctrl-0 = <&i2c7_bus>; + pinctrl-names = "default"; + status = "okay"; + + max77686: max77686_pmic@9 { + compatible = "maxim,max77686"; + interrupt-parent = <&gpx0>; + interrupts = <7 IRQ_EDGE_TYPE_NONE>; + reg = <0x09>; + #clock-cells = <1>; + + voltage-regulators { + ldo1_reg: LDO1 { + regulator-name = "VALIVE_1.0V_AP"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + ldo2_reg: LDO2 { + regulator-name = "VM1M2_1.2V_AP"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + ldo3_reg: LDO3 { + regulator-name = "VCC_1.8V_AP"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo4_reg: LDO4 { + regulator-name = "VCC_2.8V_AP"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + }; + + ldo5_reg: LDO5 { + regulator-name = "VTOUCH_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo6_reg: LDO6 { + regulator-name = "VMPLL_1.0V_AP"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + ldo7_reg: LDO7 { + regulator-name = "VPLL_1.0V_AP"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + ldo8_reg: LDO8 { + regulator-name = "VMIPI_1.0V"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + ldo9_reg: LDO9 { + regulator-name = "CAM_ISP_MIPI_1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + ldo10_reg: LDO10 { + regulator-name = "VMIPI_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + ldo11_reg: LDO11 { + regulator-name = "VABB1_1.95V"; + regulator-min-microvolt = <1950000>; + regulator-max-microvolt = <1950000>; + regulator-always-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + ldo12_reg: LDO12 { + regulator-name = "VUOTG_3.0V"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + ldo13_reg: LDO13 { + status = "disabled"; + }; + + ldo14_reg: LDO14 { + regulator-name = "VABB2_1.95V"; + regulator-min-microvolt = <1950000>; + regulator-max-microvolt = <1950000>; + regulator-always-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + ldo15_reg: LDO15 { + regulator-name = "VHSIC_1.0V"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + ldo16_reg: LDO16 { + regulator-name = "VHSIC_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + ldo17_reg: LDO17 { + status = "disabled"; + }; + + ldo18_reg: LDO18 { + regulator-name = "CAM_ISP_SENSOR_IO_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo19_reg: LDO19 { + regulator-name = "VT_CAM_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo20_reg: LDO20 { + regulator-name = "VDDQ_PRE_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo21_reg: LDO21 { + regulator-name = "VTF_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + maxim,ena-gpios = <&gpy2 0 GPIO_ACTIVE_HIGH>; + }; + + ldo22_reg: LDO22 { + regulator-name = "VMEM_VDD_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + maxim,ena-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>; + }; + + ldo23_reg: LDO23 { + regulator-name = "TSP_AVDD_3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + ldo24_reg: LDO24 { + regulator-name = "TSP_VDD_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo25_reg: LDO25 { + status = "disabled"; + }; + + ldo26_reg: LDO26 { + regulator-name = "MOTOR_VCC_3.0V"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + + buck1_reg: BUCK1 { + regulator-name = "vdd_mif"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + buck2_reg: BUCK2 { + regulator-name = "vdd_arm"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + buck3_reg: BUCK3 { + regulator-name = "vdd_int"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1150000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + buck4_reg: BUCK4 { + regulator-name = "vdd_g3d"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1150000>; + regulator-boot-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + buck5_reg: BUCK5 { + regulator-name = "VMEM_1.2V_AP"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + buck6_reg: BUCK6 { + regulator-name = "VCC_SUB_1.35V"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + }; + + buck7_reg: BUCK7 { + regulator-name = "VCC_SUB_2.0V"; + regulator-min-microvolt = <2000000>; + regulator-max-microvolt = <2000000>; + regulator-always-on; + }; + + buck8_reg: BUCK8 { + regulator-name = "VMEM_VDDF_3.0V"; + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + maxim,ena-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>; + }; + + buck9_reg: BUCK9 { + regulator-name = "CAM_ISP_CORE_1.2V"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1200000>; + }; + }; + }; +}; + +&i2c_8 { + status = "okay"; +}; + +&i2s0 { + pinctrl-0 = <&i2s0_bus>; + pinctrl-names = "default"; + status = "okay"; +}; + +&mixer { + status = "okay"; +}; + +&mshc_0 { + broken-cd; + non-removable; + card-detect-delay = <200>; + vmmc-supply = <&ldo22_reg>; + clock-frequency = <400000000>; + samsung,dw-mshc-ciu-div = <0>; + samsung,dw-mshc-sdr-timing = <2 3>; + samsung,dw-mshc-ddr-timing = <1 2>; + pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>; + pinctrl-names = "default"; + status = "okay"; + bus-width = <8>; + cap-mmc-highspeed; +}; + +&pmu_system_controller { + assigned-clocks = <&pmu_system_controller 0>; + assigned-clock-parents = <&clock CLK_XUSBXTI>; +}; + +&pinctrl_0 { + pinctrl-names = "default"; + pinctrl-0 = <&sleep0>; + + mhl_int: mhl-int { + samsung,pins = "gpf3-5"; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + i2c_mhl_bus: i2c-mhl-bus { + samsung,pins = "gpf0-4", "gpf0-6"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + }; + + sleep0: sleep-states { + PIN_SLP(gpa0-0, INPUT, NONE); + PIN_SLP(gpa0-1, OUT0, NONE); + PIN_SLP(gpa0-2, INPUT, NONE); + PIN_SLP(gpa0-3, INPUT, UP); + PIN_SLP(gpa0-4, INPUT, NONE); + PIN_SLP(gpa0-5, INPUT, DOWN); + PIN_SLP(gpa0-6, INPUT, DOWN); + PIN_SLP(gpa0-7, INPUT, UP); + + PIN_SLP(gpa1-0, INPUT, DOWN); + PIN_SLP(gpa1-1, INPUT, DOWN); + PIN_SLP(gpa1-2, INPUT, DOWN); + PIN_SLP(gpa1-3, INPUT, DOWN); + PIN_SLP(gpa1-4, INPUT, DOWN); + PIN_SLP(gpa1-5, INPUT, DOWN); + + PIN_SLP(gpb-0, INPUT, NONE); + PIN_SLP(gpb-1, INPUT, NONE); + PIN_SLP(gpb-2, INPUT, NONE); + PIN_SLP(gpb-3, INPUT, NONE); + PIN_SLP(gpb-4, INPUT, DOWN); + PIN_SLP(gpb-5, INPUT, UP); + PIN_SLP(gpb-6, INPUT, DOWN); + PIN_SLP(gpb-7, INPUT, DOWN); + + PIN_SLP(gpc0-0, INPUT, DOWN); + PIN_SLP(gpc0-1, INPUT, DOWN); + PIN_SLP(gpc0-2, INPUT, DOWN); + PIN_SLP(gpc0-3, INPUT, DOWN); + PIN_SLP(gpc0-4, INPUT, DOWN); + + PIN_SLP(gpc1-0, INPUT, NONE); + PIN_SLP(gpc1-1, PREV, NONE); + PIN_SLP(gpc1-2, INPUT, NONE); + PIN_SLP(gpc1-3, INPUT, NONE); + PIN_SLP(gpc1-4, INPUT, NONE); + + PIN_SLP(gpd0-0, INPUT, DOWN); + PIN_SLP(gpd0-1, INPUT, DOWN); + PIN_SLP(gpd0-2, INPUT, NONE); + PIN_SLP(gpd0-3, INPUT, NONE); + + PIN_SLP(gpd1-0, INPUT, DOWN); + PIN_SLP(gpd1-1, INPUT, DOWN); + PIN_SLP(gpd1-2, INPUT, NONE); + PIN_SLP(gpd1-3, INPUT, NONE); + + PIN_SLP(gpf0-0, INPUT, NONE); + PIN_SLP(gpf0-1, INPUT, NONE); + PIN_SLP(gpf0-2, INPUT, DOWN); + PIN_SLP(gpf0-3, INPUT, DOWN); + PIN_SLP(gpf0-4, INPUT, NONE); + PIN_SLP(gpf0-5, INPUT, DOWN); + PIN_SLP(gpf0-6, INPUT, NONE); + PIN_SLP(gpf0-7, INPUT, DOWN); + + PIN_SLP(gpf1-0, INPUT, DOWN); + PIN_SLP(gpf1-1, INPUT, DOWN); + PIN_SLP(gpf1-2, INPUT, DOWN); + PIN_SLP(gpf1-3, INPUT, DOWN); + PIN_SLP(gpf1-4, INPUT, NONE); + PIN_SLP(gpf1-5, INPUT, NONE); + PIN_SLP(gpf1-6, INPUT, DOWN); + PIN_SLP(gpf1-7, PREV, NONE); + + PIN_SLP(gpf2-0, PREV, NONE); + PIN_SLP(gpf2-1, INPUT, DOWN); + PIN_SLP(gpf2-2, INPUT, DOWN); + PIN_SLP(gpf2-3, INPUT, DOWN); + PIN_SLP(gpf2-4, INPUT, DOWN); + PIN_SLP(gpf2-5, INPUT, DOWN); + PIN_SLP(gpf2-6, INPUT, NONE); + PIN_SLP(gpf2-7, INPUT, NONE); + + PIN_SLP(gpf3-0, INPUT, NONE); + PIN_SLP(gpf3-1, PREV, NONE); + PIN_SLP(gpf3-2, PREV, NONE); + PIN_SLP(gpf3-3, PREV, NONE); + PIN_SLP(gpf3-4, OUT1, NONE); + PIN_SLP(gpf3-5, INPUT, DOWN); + + PIN_SLP(gpj0-0, PREV, NONE); + PIN_SLP(gpj0-1, PREV, NONE); + PIN_SLP(gpj0-2, PREV, NONE); + PIN_SLP(gpj0-3, INPUT, DOWN); + PIN_SLP(gpj0-4, PREV, NONE); + PIN_SLP(gpj0-5, PREV, NONE); + PIN_SLP(gpj0-6, INPUT, DOWN); + PIN_SLP(gpj0-7, INPUT, DOWN); + + PIN_SLP(gpj1-0, INPUT, DOWN); + PIN_SLP(gpj1-1, PREV, NONE); + PIN_SLP(gpj1-2, PREV, NONE); + PIN_SLP(gpj1-3, INPUT, DOWN); + PIN_SLP(gpj1-4, INPUT, DOWN); + }; +}; + +&pinctrl_1 { + pinctrl-names = "default"; + pinctrl-0 = <&sleep1>; + + hdmi_hpd: hdmi-hpd { + samsung,pins = "gpx3-7"; + samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>; + }; + + sleep1: sleep-states { + PIN_SLP(gpk0-0, PREV, NONE); + PIN_SLP(gpk0-1, PREV, NONE); + PIN_SLP(gpk0-2, OUT0, NONE); + PIN_SLP(gpk0-3, PREV, NONE); + PIN_SLP(gpk0-4, PREV, NONE); + PIN_SLP(gpk0-5, PREV, NONE); + PIN_SLP(gpk0-6, PREV, NONE); + + PIN_SLP(gpk1-0, INPUT, DOWN); + PIN_SLP(gpk1-1, INPUT, DOWN); + PIN_SLP(gpk1-2, INPUT, DOWN); + PIN_SLP(gpk1-3, PREV, NONE); + PIN_SLP(gpk1-4, PREV, NONE); + PIN_SLP(gpk1-5, PREV, NONE); + PIN_SLP(gpk1-6, PREV, NONE); + + PIN_SLP(gpk2-0, INPUT, DOWN); + PIN_SLP(gpk2-1, INPUT, DOWN); + PIN_SLP(gpk2-2, INPUT, DOWN); + PIN_SLP(gpk2-3, INPUT, DOWN); + PIN_SLP(gpk2-4, INPUT, DOWN); + PIN_SLP(gpk2-5, INPUT, DOWN); + PIN_SLP(gpk2-6, INPUT, DOWN); + + PIN_SLP(gpk3-0, OUT0, NONE); + PIN_SLP(gpk3-1, INPUT, NONE); + PIN_SLP(gpk3-2, INPUT, DOWN); + PIN_SLP(gpk3-3, INPUT, NONE); + PIN_SLP(gpk3-4, INPUT, NONE); + PIN_SLP(gpk3-5, INPUT, NONE); + PIN_SLP(gpk3-6, INPUT, NONE); + + PIN_SLP(gpl0-0, INPUT, DOWN); + PIN_SLP(gpl0-1, INPUT, DOWN); + PIN_SLP(gpl0-2, INPUT, DOWN); + PIN_SLP(gpl0-3, INPUT, DOWN); + PIN_SLP(gpl0-4, PREV, NONE); + PIN_SLP(gpl0-6, PREV, NONE); + + PIN_SLP(gpl1-0, INPUT, DOWN); + PIN_SLP(gpl1-1, INPUT, DOWN); + PIN_SLP(gpl2-0, INPUT, DOWN); + PIN_SLP(gpl2-1, INPUT, DOWN); + PIN_SLP(gpl2-2, INPUT, DOWN); + PIN_SLP(gpl2-3, INPUT, DOWN); + PIN_SLP(gpl2-4, INPUT, DOWN); + PIN_SLP(gpl2-5, INPUT, DOWN); + PIN_SLP(gpl2-6, PREV, NONE); + PIN_SLP(gpl2-7, INPUT, DOWN); + + PIN_SLP(gpm0-0, INPUT, DOWN); + PIN_SLP(gpm0-1, INPUT, DOWN); + PIN_SLP(gpm0-2, INPUT, DOWN); + PIN_SLP(gpm0-3, INPUT, DOWN); + PIN_SLP(gpm0-4, INPUT, DOWN); + PIN_SLP(gpm0-5, INPUT, DOWN); + PIN_SLP(gpm0-6, INPUT, DOWN); + PIN_SLP(gpm0-7, INPUT, DOWN); + + PIN_SLP(gpm1-0, INPUT, DOWN); + PIN_SLP(gpm1-1, INPUT, DOWN); + PIN_SLP(gpm1-2, INPUT, NONE); + PIN_SLP(gpm1-3, INPUT, NONE); + PIN_SLP(gpm1-4, INPUT, NONE); + PIN_SLP(gpm1-5, INPUT, NONE); + PIN_SLP(gpm1-6, INPUT, DOWN); + + PIN_SLP(gpm2-0, INPUT, NONE); + PIN_SLP(gpm2-1, INPUT, NONE); + PIN_SLP(gpm2-2, INPUT, DOWN); + PIN_SLP(gpm2-3, INPUT, DOWN); + PIN_SLP(gpm2-4, INPUT, DOWN); + + PIN_SLP(gpm3-0, PREV, NONE); + PIN_SLP(gpm3-1, PREV, NONE); + PIN_SLP(gpm3-2, PREV, NONE); + PIN_SLP(gpm3-3, OUT1, NONE); + PIN_SLP(gpm3-4, INPUT, DOWN); + PIN_SLP(gpm3-5, INPUT, DOWN); + PIN_SLP(gpm3-6, INPUT, DOWN); + PIN_SLP(gpm3-7, INPUT, DOWN); + + PIN_SLP(gpm4-0, INPUT, DOWN); + PIN_SLP(gpm4-1, INPUT, DOWN); + PIN_SLP(gpm4-2, INPUT, DOWN); + PIN_SLP(gpm4-3, INPUT, DOWN); + PIN_SLP(gpm4-4, INPUT, DOWN); + PIN_SLP(gpm4-5, INPUT, DOWN); + PIN_SLP(gpm4-6, INPUT, DOWN); + PIN_SLP(gpm4-7, INPUT, DOWN); + + PIN_SLP(gpy0-0, INPUT, DOWN); + PIN_SLP(gpy0-1, INPUT, DOWN); + PIN_SLP(gpy0-2, INPUT, DOWN); + PIN_SLP(gpy0-3, INPUT, DOWN); + PIN_SLP(gpy0-4, INPUT, DOWN); + PIN_SLP(gpy0-5, INPUT, DOWN); + + PIN_SLP(gpy1-0, INPUT, DOWN); + PIN_SLP(gpy1-1, INPUT, DOWN); + PIN_SLP(gpy1-2, INPUT, DOWN); + PIN_SLP(gpy1-3, INPUT, DOWN); + + PIN_SLP(gpy2-0, PREV, NONE); + PIN_SLP(gpy2-1, INPUT, DOWN); + PIN_SLP(gpy2-2, INPUT, NONE); + PIN_SLP(gpy2-3, INPUT, NONE); + PIN_SLP(gpy2-4, INPUT, NONE); + PIN_SLP(gpy2-5, INPUT, NONE); + + PIN_SLP(gpy3-0, INPUT, DOWN); + PIN_SLP(gpy3-1, INPUT, DOWN); + PIN_SLP(gpy3-2, INPUT, DOWN); + PIN_SLP(gpy3-3, INPUT, DOWN); + PIN_SLP(gpy3-4, INPUT, DOWN); + PIN_SLP(gpy3-5, INPUT, DOWN); + PIN_SLP(gpy3-6, INPUT, DOWN); + PIN_SLP(gpy3-7, INPUT, DOWN); + + PIN_SLP(gpy4-0, INPUT, DOWN); + PIN_SLP(gpy4-1, INPUT, DOWN); + PIN_SLP(gpy4-2, INPUT, DOWN); + PIN_SLP(gpy4-3, INPUT, DOWN); + PIN_SLP(gpy4-4, INPUT, DOWN); + PIN_SLP(gpy4-5, INPUT, DOWN); + PIN_SLP(gpy4-6, INPUT, DOWN); + PIN_SLP(gpy4-7, INPUT, DOWN); + + PIN_SLP(gpy5-0, INPUT, DOWN); + PIN_SLP(gpy5-1, INPUT, DOWN); + PIN_SLP(gpy5-2, INPUT, DOWN); + PIN_SLP(gpy5-3, INPUT, DOWN); + PIN_SLP(gpy5-4, INPUT, DOWN); + PIN_SLP(gpy5-5, INPUT, DOWN); + PIN_SLP(gpy5-6, INPUT, DOWN); + PIN_SLP(gpy5-7, INPUT, DOWN); + + PIN_SLP(gpy6-0, INPUT, DOWN); + PIN_SLP(gpy6-1, INPUT, DOWN); + PIN_SLP(gpy6-2, INPUT, DOWN); + PIN_SLP(gpy6-3, INPUT, DOWN); + PIN_SLP(gpy6-4, INPUT, DOWN); + PIN_SLP(gpy6-5, INPUT, DOWN); + PIN_SLP(gpy6-6, INPUT, DOWN); + PIN_SLP(gpy6-7, INPUT, DOWN); + }; +}; + +&pinctrl_2 { + pinctrl-names = "default"; + pinctrl-0 = <&sleep2>; + + sleep2: sleep-states { + PIN_SLP(gpz-0, INPUT, DOWN); + PIN_SLP(gpz-1, INPUT, DOWN); + PIN_SLP(gpz-2, INPUT, DOWN); + PIN_SLP(gpz-3, INPUT, DOWN); + PIN_SLP(gpz-4, INPUT, DOWN); + PIN_SLP(gpz-5, INPUT, DOWN); + PIN_SLP(gpz-6, INPUT, DOWN); + }; +}; + +&pinctrl_3 { + pinctrl-names = "default"; + pinctrl-0 = <&sleep3>; + + sleep3: sleep-states { + PIN_SLP(gpv0-0, INPUT, DOWN); + PIN_SLP(gpv0-1, INPUT, DOWN); + PIN_SLP(gpv0-2, INPUT, DOWN); + PIN_SLP(gpv0-3, INPUT, DOWN); + PIN_SLP(gpv0-4, INPUT, DOWN); + PIN_SLP(gpv0-5, INPUT, DOWN); + PIN_SLP(gpv0-6, INPUT, DOWN); + PIN_SLP(gpv0-7, INPUT, DOWN); + + PIN_SLP(gpv1-0, INPUT, DOWN); + PIN_SLP(gpv1-1, INPUT, DOWN); + PIN_SLP(gpv1-2, INPUT, DOWN); + PIN_SLP(gpv1-3, INPUT, DOWN); + PIN_SLP(gpv1-4, INPUT, DOWN); + PIN_SLP(gpv1-5, INPUT, DOWN); + PIN_SLP(gpv1-6, INPUT, DOWN); + PIN_SLP(gpv1-7, INPUT, DOWN); + + PIN_SLP(gpv2-0, INPUT, DOWN); + PIN_SLP(gpv2-1, INPUT, DOWN); + PIN_SLP(gpv2-2, INPUT, DOWN); + PIN_SLP(gpv2-3, INPUT, DOWN); + PIN_SLP(gpv2-4, INPUT, DOWN); + PIN_SLP(gpv2-5, INPUT, DOWN); + PIN_SLP(gpv2-6, INPUT, DOWN); + PIN_SLP(gpv2-7, INPUT, DOWN); + + PIN_SLP(gpv3-0, INPUT, DOWN); + PIN_SLP(gpv3-1, INPUT, DOWN); + PIN_SLP(gpv3-2, INPUT, DOWN); + PIN_SLP(gpv3-3, INPUT, DOWN); + PIN_SLP(gpv3-4, INPUT, DOWN); + PIN_SLP(gpv3-5, INPUT, DOWN); + PIN_SLP(gpv3-6, INPUT, DOWN); + PIN_SLP(gpv3-7, INPUT, DOWN); + + PIN_SLP(gpv4-0, INPUT, DOWN); + }; +}; + +&pwm { + pinctrl-0 = <&pwm0_out>; + pinctrl-names = "default"; + samsung,pwm-outputs = <0>; + status = "okay"; +}; + +&rtc { + status = "okay"; + clocks = <&clock CLK_RTC>, <&max77686 MAX77686_CLK_AP>; + clock-names = "rtc", "rtc_src"; +}; + +&sdhci_2 { + bus-width = <4>; + cd-gpios = <&gpx3 4 GPIO_ACTIVE_HIGH>; + cd-inverted; + pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4>; + pinctrl-names = "default"; + vmmc-supply = <&ldo21_reg>; + status = "okay"; +}; + +&sdhci_3 { + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&sd3_clk &sd3_cmd &sd3_bus4>; + + broken-cd; + + mmc-pwrseq = <&wlan_pwrseq>; + + bus-width = <4>; + status = "okay"; + + brcmf: wifi@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + interrupt-parent = <&gpx2>; + interrupts = <5 IRQ_TYPE_NONE>; + interrupt-names = "host-wake"; + }; +}; + +&serial_0 { + status = "okay"; +}; + +&serial_1 { + status = "okay"; +}; + +&serial_2 { + status = "okay"; +}; + +&serial_3 { + status = "okay"; +}; + +&sleep0 { + gpf1-0 { + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>; + }; +}; + +&spi_1 { + pinctrl-names = "default"; + pinctrl-0 = <&spi1_bus>; + cs-gpios = <&gpb 5 GPIO_ACTIVE_HIGH>; + status = "okay"; + + s5c73m3_spi: s5c73m3@0 { + compatible = "samsung,s5c73m3"; + spi-max-frequency = <50000000>; + reg = <0>; + controller-data { + samsung,spi-feedback-delay = <2>; + }; + }; +}; + +&tmu { + vtmu-supply = <&ldo10_reg>; + status = "okay"; +}; + +&pmu_system_controller { + compatible = "samsung,exynos4210-pmu", "syscon", "simple-mfd"; + + reboot-mode { + compatible = "syscon-reboot-mode"; + offset = <0x80c>; + + mode-normal = <0x12345670>; + mode-bootloader = <0x12345671>; + mode-download = <0x12345671>; + mode-recovery = <0x12345674>; + }; +}; diff --git a/arch/arm/boot/dts/exynos4412-t0.dts b/arch/arm/boot/dts/exynos4412-t0.dts new file mode 100644 index 000000000000..c49abe857b6f --- /dev/null +++ b/arch/arm/boot/dts/exynos4412-t0.dts @@ -0,0 +1,51 @@ +// SPDX-License-Identifier: GPL-2.0 +/dts-v1/; +#include "exynos4412-midas.dtsi" + +/ { + compatible = "samsung,t0", "samsung,midas", "samsung,exynos4412", "samsung,exynos4"; + model = "Samsung T0 (GT-N7100, GT-N7105) based on Exynos4412"; + + memory@40000000 { + device_type = "memory"; + reg = <0x40000000 0x80000000>; + }; + +}; + +&buck9_reg { + maxim,ena-gpios = <&gpm1 0 GPIO_ACTIVE_HIGH>; +}; + +&cam_io_reg { + gpio = <&gpm0 7 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&cam_af_reg { + gpio = <&gpm1 1 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&ldo13_reg { + regulator-name = "VCC_1.8V_LCD"; + regulator-min-microvolt = <18000000>; + regulator-max-microvolt = <18000000>; + regulator-always-on; + status = "okay"; +}; + +&ldo23_reg { + regulator-always-on; +}; + +&ldo24_reg { + regulator-always-on; +}; + +&ldo25_reg { + regulator-name = "VCI_3.0V_LCD"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + status = "okay"; +};
"midas" is the codename for a family of smartphones released by Samsung Mobile. It includes the Galaxy S3 (GT-I9300/I9305) and the Galaxy Note 2 (GT-N7100/N7105). The boards largely have the same peripherals: the main differences are touchscreen, display panel and cellular modem. Signed-off-by: Simon Shields <simon@lineageos.org> --- arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi | 144 +++ arch/arm/boot/dts/exynos4412-m0.dts | 14 + arch/arm/boot/dts/exynos4412-m3.dts | 19 + arch/arm/boot/dts/exynos4412-midas.dtsi | 1291 +++++++++++++++++++++++++++ arch/arm/boot/dts/exynos4412-t0.dts | 51 ++ 5 files changed, 1519 insertions(+) create mode 100644 arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi create mode 100644 arch/arm/boot/dts/exynos4412-m0.dts create mode 100644 arch/arm/boot/dts/exynos4412-m3.dts create mode 100644 arch/arm/boot/dts/exynos4412-midas.dtsi create mode 100644 arch/arm/boot/dts/exynos4412-t0.dts