diff mbox

[v3,3/3] ARM: dts: exynos: Add support for HDMI audio on exynos5433-tm2

Message ID 20180212163147.11561-3-s.nawrocki@samsung.com (mailing list archive)
State Accepted
Headers show

Commit Message

Sylwester Nawrocki/Kernel \(PLT\) /SRPOL/Staff Engineer/Samsung Electronics Feb. 12, 2018, 4:31 p.m. UTC 
This patch updates the sound node of the exynos5433-tm2 board
and adds clock tree configuration in order to support HDMI sound.

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
---
Changes since v2:
 - nodes sorted alphabetically, changed the assigned clock
   frequencies.

Changes since v1:
 - dropped unnecessary assigned-clock* properties for AUD PLL
   in cmu_top node,
 - changed default AUD PLL frequency so it is within recommended
   252...400 MHz range.
---
 .../boot/dts/exynos/exynos5433-tm2-common.dtsi     | 52 ++++++++++++++++++++--
 arch/arm64/boot/dts/exynos/exynos5433.dtsi         |  1 +
 2 files changed, 49 insertions(+), 4 deletions(-)

Comments

Krzysztof Kozlowski Feb. 15, 2018, 6:32 p.m. UTC | #1 
On Mon, Feb 12, 2018 at 05:31:47PM +0100, Sylwester Nawrocki wrote:
> This patch updates the sound node of the exynos5433-tm2 board
> and adds clock tree configuration in order to support HDMI sound.
> 
> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
> ---
> Changes since v2:
>  - nodes sorted alphabetically, changed the assigned clock
>    frequencies.
> 
> Changes since v1:
>  - dropped unnecessary assigned-clock* properties for AUD PLL
>    in cmu_top node,
>  - changed default AUD PLL frequency so it is within recommended
>    252...400 MHz range.
> ---
>  .../boot/dts/exynos/exynos5433-tm2-common.dtsi     | 52 ++++++++++++++++++++--
>  arch/arm64/boot/dts/exynos/exynos5433.dtsi         |  1 +
>  2 files changed, 49 insertions(+), 4 deletions(-)
> 

Thanks, applied.

Best regards,
Krzysztof

--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
index a77462da4a36..b73c389e1a8b 100644
--- a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
@@ -14,6 +14,7 @@ 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/sound/samsung-i2s.h>
 
 / {
 	aliases {
@@ -112,8 +113,8 @@ 
 
 	sound {
 		compatible = "samsung,tm2-audio";
-		audio-codec = <&wm5110>;
-		i2s-controller = <&i2s0>;
+		audio-codec = <&wm5110>, <&hdmi>;
+		i2s-controller = <&i2s0 0>, <&i2s1 0>;
 		audio-amplifier = <&max98504>;
 		mic-bias-gpios = <&gpr3 2 GPIO_ACTIVE_HIGH>;
 		model = "wm5110";
@@ -217,8 +218,40 @@ 
 };
 
 &cmu_aud {
-	assigned-clocks = <&cmu_aud CLK_MOUT_AUD_PLL_USER>;
-	assigned-clock-parents = <&cmu_top CLK_FOUT_AUD_PLL>;
+	assigned-clocks = <&cmu_aud CLK_MOUT_AUD_PLL_USER>,
+		<&cmu_aud CLK_MOUT_SCLK_AUD_I2S>,
+		<&cmu_aud CLK_MOUT_SCLK_AUD_PCM>,
+		<&cmu_top CLK_MOUT_AUD_PLL>,
+		<&cmu_top CLK_MOUT_AUD_PLL_USER_T>,
+		<&cmu_top CLK_MOUT_SCLK_AUDIO0>,
+		<&cmu_top CLK_MOUT_SCLK_AUDIO1>,
+		<&cmu_top CLK_MOUT_SCLK_SPDIF>,
+
+		<&cmu_aud CLK_DIV_AUD_CA5>,
+		<&cmu_aud CLK_DIV_ACLK_AUD>,
+		<&cmu_aud CLK_DIV_PCLK_DBG_AUD>,
+		<&cmu_aud CLK_DIV_SCLK_AUD_I2S>,
+		<&cmu_aud CLK_DIV_SCLK_AUD_PCM>,
+		<&cmu_aud CLK_DIV_SCLK_AUD_SLIMBUS>,
+		<&cmu_aud CLK_DIV_SCLK_AUD_UART>,
+		<&cmu_top CLK_DIV_SCLK_AUDIO0>,
+		<&cmu_top CLK_DIV_SCLK_AUDIO1>,
+		<&cmu_top CLK_DIV_SCLK_PCM1>,
+		<&cmu_top CLK_DIV_SCLK_I2S1>;
+
+	assigned-clock-parents = <&cmu_top CLK_FOUT_AUD_PLL>,
+		<&cmu_aud CLK_MOUT_AUD_PLL_USER>,
+		<&cmu_aud CLK_MOUT_AUD_PLL_USER>,
+		<&cmu_top CLK_FOUT_AUD_PLL>,
+		<&cmu_top CLK_MOUT_AUD_PLL>,
+		<&cmu_top CLK_MOUT_AUD_PLL_USER_T>,
+		<&cmu_top CLK_MOUT_AUD_PLL_USER_T>,
+		<&cmu_top CLK_SCLK_AUDIO0>;
+
+	assigned-clock-rates = <0>, <0>, <0>, <0>, <0>, <0>, <0>, <0>,
+		<196608001>, <65536001>, <32768001>, <49152001>,
+		<2048001>, <24576001>, <196608001>,
+		<24576001>, <98304001>, <2048001>, <49152001>;
 };
 
 &cmu_fsys {
@@ -267,6 +300,11 @@ 
 				 <&cmu_top CLK_MOUT_BUS_PLL_USER>;
 };
 
+&cmu_top {
+	assigned-clocks = <&cmu_top CLK_FOUT_AUD_PLL>;
+	assigned-clock-rates = <196608001>;
+};
+
 &cpu0 {
 	cpu-supply = <&buck3_reg>;
 };
@@ -838,6 +876,12 @@ 
 	status = "okay";
 };
 
+&i2s1 {
+	assigned-clocks = <&i2s1 CLK_I2S_RCLK_SRC>;
+	assigned-clock-parents = <&cmu_peric CLK_SCLK_I2S1>;
+	status = "okay";
+};
+
 &mshc_0 {
 	status = "okay";
 	mmc-hs200-1_8v;
diff --git a/arch/arm64/boot/dts/exynos/exynos5433.dtsi b/arch/arm64/boot/dts/exynos/exynos5433.dtsi
index 2b73bd86bc56..c0231d077fa6 100644
--- a/arch/arm64/boot/dts/exynos/exynos5433.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos5433.dtsi
@@ -969,6 +969,7 @@ 
 			ddc = <&hsi2c_11>;
 			samsung,syscon-phandle = <&pmu_system_controller>;
 			samsung,sysreg-phandle = <&syscon_disp>;
+			#sound-dai-cells = <0>;
 			status = "disabled";
 		};