@@ -29,11 +29,13 @@
struct private_data {
struct opp_table *opp_table;
struct device *cpu_dev;
- const char *reg_name;
+ struct clk *clk;
struct regulator *reg;
bool have_static_opps;
};
+static struct private_data *priv_data;
+
static struct freq_attr *cpufreq_dt_attr[] = {
&cpufreq_freq_attr_scaling_available_freqs,
NULL, /* Extra space for boost-attr if required */
@@ -94,7 +96,7 @@ static const char *find_supply_name(struct device *dev)
return name;
}
-static int resources_available(void)
+static int get_cpu_resources(struct private_data *priv, unsigned int cpu)
{
struct device *cpu_dev;
struct regulator *cpu_reg;
@@ -102,9 +104,9 @@ static int resources_available(void)
int ret = 0;
const char *name;
- cpu_dev = get_cpu_device(0);
+ cpu_dev = get_cpu_device(cpu);
if (!cpu_dev) {
- pr_err("failed to get cpu0 device\n");
+ pr_err("failed to get cpu%d device\n", cpu);
return -ENODEV;
}
@@ -123,12 +125,10 @@ static int resources_available(void)
return ret;
}
- clk_put(cpu_clk);
-
name = find_supply_name(cpu_dev);
/* Platform doesn't require regulator */
if (!name)
- return 0;
+ goto no_regulator;
cpu_reg = regulator_get_optional(cpu_dev, name);
ret = PTR_ERR_OR_ZERO(cpu_reg);
@@ -138,48 +138,42 @@ static int resources_available(void)
* not yet registered, we should try defering probe.
*/
if (ret == -EPROBE_DEFER)
- dev_dbg(cpu_dev, "cpu0 regulator not ready, retry\n");
+ dev_dbg(cpu_dev, "regulator not ready, retry\n");
else
- dev_dbg(cpu_dev, "no regulator for cpu0: %d\n", ret);
-
- return ret;
+ dev_dbg(cpu_dev, "no regulator for cpu: %d\n", ret);
+ goto free;
}
-
- regulator_put(cpu_reg);
+no_regulator:
+ priv->cpu_dev = cpu_dev;
+ priv->clk = cpu_clk;
+ priv->reg = cpu_reg;
return 0;
+free:
+ clk_put(cpu_clk);
+ return ret;
+}
+
+static void put_cpu_resources(struct private_data *priv)
+{
+ clk_put(priv->clk);
+ regulator_put(priv->reg);
}
static int cpufreq_init(struct cpufreq_policy *policy)
{
struct cpufreq_frequency_table *freq_table;
struct opp_table *opp_table = NULL;
- struct private_data *priv;
- struct regulator *reg;
- struct device *cpu_dev;
- struct clk *cpu_clk;
+ struct private_data *priv = &priv_data[policy->cpu];
+ struct device *cpu_dev = priv->cpu_dev;
unsigned int transition_latency;
bool fallback = false;
- const char *name;
int ret;
- cpu_dev = get_cpu_device(policy->cpu);
- if (!cpu_dev) {
- pr_err("failed to get cpu%d device\n", policy->cpu);
- return -ENODEV;
- }
-
- cpu_clk = clk_get(cpu_dev, NULL);
- if (IS_ERR(cpu_clk)) {
- ret = PTR_ERR(cpu_clk);
- dev_err(cpu_dev, "%s: failed to get clk: %d\n", __func__, ret);
- return ret;
- }
-
/* Get OPP-sharing information from "operating-points-v2" bindings */
ret = dev_pm_opp_of_get_sharing_cpus(cpu_dev, policy->cpus);
if (ret) {
if (ret != -ENOENT)
- goto out_put_clk;
+ return ret;
/*
* operating-points-v2 not supported, fallback to old method of
@@ -190,35 +184,18 @@ static int cpufreq_init(struct cpufreq_policy *policy)
fallback = true;
}
- priv = kzalloc(sizeof(*priv), GFP_KERNEL);
- if (!priv) {
- ret = -ENOMEM;
- goto out_put_clk;
- }
-
/*
* OPP layer will be taking care of regulators.
*/
- name = find_supply_name(cpu_dev);
- if (name) {
- reg = regulator_get_optional(cpu_dev, name);
- ret = PTR_ERR_OR_ZERO(reg);
- if (ret) {
- dev_err(cpu_dev, "Failed to get regulator for cpu%d: %d\n",
- policy->cpu, ret);
- goto out_free_priv;
- }
- priv->reg = reg;
+ if (priv->reg) {
opp_table = dev_pm_opp_set_regulators(cpu_dev, &priv->reg, 1);
if (IS_ERR(opp_table)) {
ret = PTR_ERR(opp_table);
- dev_err(cpu_dev, "Failed to set regulator for cpu%d: %d\n",
- policy->cpu, ret);
- goto out_put_regulator;
+ dev_err(cpu_dev, "Failed to set regulator for cpu: %d\n",
+ ret);
+ return ret;
}
}
-
- priv->reg_name = name;
priv->opp_table = opp_table;
/*
@@ -264,11 +241,9 @@ static int cpufreq_init(struct cpufreq_policy *policy)
goto out_free_opp;
}
- priv->cpu_dev = cpu_dev;
policy->driver_data = priv;
- policy->clk = cpu_clk;
+ policy->clk = priv->clk;
policy->freq_table = freq_table;
-
policy->suspend_freq = dev_pm_opp_get_suspend_opp_freq(cpu_dev) / 1000;
/* Support turbo/boost mode */
@@ -296,16 +271,8 @@ static int cpufreq_init(struct cpufreq_policy *policy)
out_free_opp:
if (priv->have_static_opps)
dev_pm_opp_of_cpumask_remove_table(policy->cpus);
-out_put_opp_regulator:
- if (name)
- dev_pm_opp_put_regulators(opp_table);
-out_put_regulator:
if (priv->reg)
- regulator_put(priv->reg);
-out_free_priv:
- kfree(priv);
-out_put_clk:
- clk_put(cpu_clk);
+ dev_pm_opp_put_regulators(opp_table);
return ret;
}
@@ -317,13 +284,8 @@ static int cpufreq_exit(struct cpufreq_policy *policy)
dev_pm_opp_free_cpufreq_table(priv->cpu_dev, &policy->freq_table);
if (priv->have_static_opps)
dev_pm_opp_of_cpumask_remove_table(policy->related_cpus);
- if (priv->reg_name)
- dev_pm_opp_put_regulators(priv->opp_table);
if (priv->reg)
- regulator_put(priv->reg);
-
- clk_put(policy->clk);
- kfree(priv);
+ dev_pm_opp_put_regulators(priv->opp_table);
return 0;
}
@@ -344,18 +306,21 @@ static struct cpufreq_driver dt_cpufreq_driver = {
static int dt_cpufreq_probe(struct platform_device *pdev)
{
struct cpufreq_dt_platform_data *data = dev_get_platdata(&pdev->dev);
- int ret;
+ int i, ret;
- /*
- * All per-cluster (CPUs sharing clock/voltages) initialization is done
- * from ->init(). In probe(), we just need to make sure that clk and
- * regulators are available. Else defer probe and retry.
- *
- * FIXME: Is checking this only for CPU0 sufficient ?
- */
- ret = resources_available();
- if (ret)
- return ret;
+ priv_data = devm_kcalloc(&pdev->dev, num_possible_cpus(),
+ sizeof(*priv_data), GFP_KERNEL);
+ if (!priv_data)
+ return -ENOMEM;
+
+ for (i = 0; i < num_possible_cpus(); i++) {
+ ret = get_cpu_resources(&priv_data[i], i);
+ if (ret) {
+ while (i-- > 0)
+ put_cpu_resources(&priv_data[i]);
+ return ret;
+ }
+ }
if (data) {
if (data->have_governor_per_policy)
@@ -375,7 +340,12 @@ static int dt_cpufreq_probe(struct platform_device *pdev)
static int dt_cpufreq_remove(struct platform_device *pdev)
{
+ int i;
+
cpufreq_unregister_driver(&dt_cpufreq_driver);
+ for (i = 0; i < num_possible_cpus(); i++)
+ put_cpu_resources(&priv_data[i]);
+
return 0;
}
All resources needed for driver operation (clocks and regulators) are now gathered in driver ->probe() and kept for the whole driver lifetime. This allows to get rid of the re-acquiring resources always in ->init() callback, which might be called in a context not approperiate for such operation. This fixes following warning during system suspend/resume cycle on Samsung Exynos based Odroid XU3/XU4 boards: --->8--- Enabling non-boot CPUs ... CPU1 is up CPU2 is up CPU3 is up ------------[ cut here ]------------ WARNING: CPU: 4 PID: 29 at drivers/i2c/i2c-core-base.c:1869 __i2c_transfer+0x6f8/0xa50 Modules linked in: CPU: 4 PID: 29 Comm: cpuhp/4 Tainted: G W 5.0.0-rc4-next-20190131-00024-g54b06b29cc65 #5324 Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [<c01110e8>] (unwind_backtrace) from [<c010d11c>] (show_stack+0x10/0x14) [<c010d11c>] (show_stack) from [<c09a2584>] (dump_stack+0x90/0xc8) [<c09a2584>] (dump_stack) from [<c0120bd0>] (__warn+0xf8/0x124) [<c0120bd0>] (__warn) from [<c0120c3c>] (warn_slowpath_null+0x40/0x48) [<c0120c3c>] (warn_slowpath_null) from [<c065cda0>] (__i2c_transfer+0x6f8/0xa50) [<c065cda0>] (__i2c_transfer) from [<c065d168>] (i2c_transfer+0x70/0xe4) [<c065d168>] (i2c_transfer) from [<c053ce4c>] (regmap_i2c_read+0x48/0x64) [<c053ce4c>] (regmap_i2c_read) from [<c0536f1c>] (_regmap_raw_read+0xf8/0x450) [<c0536f1c>] (_regmap_raw_read) from [<c053772c>] (_regmap_bus_read+0x38/0x68) [<c053772c>] (_regmap_bus_read) from [<c05365a0>] (_regmap_read+0x60/0x250) [<c05365a0>] (_regmap_read) from [<c05367cc>] (regmap_read+0x3c/0x5c) [<c05367cc>] (regmap_read) from [<c047cfc0>] (regulator_is_enabled_regmap+0x20/0x90) [<c047cfc0>] (regulator_is_enabled_regmap) from [<c0477660>] (_regulator_is_enabled+0x34/0x40) [<c0477660>] (_regulator_is_enabled) from [<c0478674>] (create_regulator+0x1a4/0x25c) [<c0478674>] (create_regulator) from [<c047c818>] (_regulator_get+0xe4/0x278) [<c047c818>] (_regulator_get) from [<c068f1dc>] (dev_pm_opp_set_regulators+0xa0/0x1c0) [<c068f1dc>] (dev_pm_opp_set_regulators) from [<c0698cc8>] (cpufreq_init+0x98/0x2d0) [<c0698cc8>] (cpufreq_init) from [<c06959e4>] (cpufreq_online+0xc8/0x71c) [<c06959e4>] (cpufreq_online) from [<c06960fc>] (cpuhp_cpufreq_online+0x8/0x10) [<c06960fc>] (cpuhp_cpufreq_online) from [<c01213d4>] (cpuhp_invoke_callback+0xf4/0xebc) [<c01213d4>] (cpuhp_invoke_callback) from [<c0122e4c>] (cpuhp_thread_fun+0x1d8/0x320) [<c0122e4c>] (cpuhp_thread_fun) from [<c0149858>] (smpboot_thread_fn+0x194/0x340) [<c0149858>] (smpboot_thread_fn) from [<c014573c>] (kthread+0x124/0x160) [<c014573c>] (kthread) from [<c01010b4>] (ret_from_fork+0x14/0x20) Exception stack(0xe897dfb0 to 0xe897dff8) dfa0: 00000000 00000000 00000000 00000000 dfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 dfe0: 00000000 00000000 00000000 00000000 00000013 00000000 irq event stamp: 3865 hardirqs last enabled at (3873): [<c0186dec>] vprintk_emit+0x228/0x2a4 hardirqs last disabled at (3880): [<c0186cf0>] vprintk_emit+0x12c/0x2a4 softirqs last enabled at (3052): [<c0102564>] __do_softirq+0x3a4/0x66c softirqs last disabled at (3043): [<c0128464>] irq_exit+0x140/0x168 ---[ end trace db48b455d924fec2 ]--- CPU4 is up CPU5 is up CPU6 is up CPU7 is up --->8--- Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> --- drivers/cpufreq/cpufreq-dt.c | 134 ++++++++++++++--------------------- 1 file changed, 52 insertions(+), 82 deletions(-)