| Message ID | 20190320135040.1433-1-m.szyprowski@samsung.com (mailing list archive) |
|---|---|
| State | Changes Requested |
| Headers | show |
| Series | ARM: dts: exynos: Increase minimal value of the Exynos4 mem buses to 160MHz | expand |
On Wed, 20 Mar 2019 at 14:51, Marek Szyprowski <m.szyprowski@samsung.com> wrote: > > On Exynos 4, the 'DMC' and 'leftbus' buses feed the internal buses of the > TV display subsystem and the Exynos Mixer hardware modules. When those > buses are set below 160MHz, Exynos Mixer is not able to properly handle > two XRGB display planes at FullHD-60MHz. DMA underrun happens, which in > turn might result in reading data out of the configured buffer, what > causes IOMMU page fault and kernel panic. > > This change fixes the following IOMMU fault, observed, when 2 Mixer planes > were enabled: > > exynos-sysmmu 12e20000.sysmmu: 12c10000.mixer: PAGE FAULT occurred at 0x20fe9000 > ------------[ cut here ]------------ > kernel BUG at drivers/iommu/exynos-iommu.c:450! > Internal error: Oops - BUG: 0 [#1] PREEMPT SMP ARM > Modules linked in: > CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.1.0-rc1-next-20190320-dirty #5628 > Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) > PC is at exynos_sysmmu_irq+0x1c8/0x244 > LR is at lock_is_held_type+0x80/0x100 > ... > Process swapper/0 (pid: 0, stack limit = 0xf4b67ceb) > Stack: (0xc1001e18 to 0xc1002000) > ... > [<c0500248>] (exynos_sysmmu_irq) from [<c0190ff8>] (__handle_irq_event_percpu+0x98/0x470) > [<c0190ff8>] (__handle_irq_event_percpu) from [<c01913ec>] (handle_irq_event_percpu+0x1c/0x58) > [<c01913ec>] (handle_irq_event_percpu) from [<c0191460>] (handle_irq_event+0x38/0x5c) > [<c0191460>] (handle_irq_event) from [<c01957d8>] (handle_level_irq+0xc0/0x134) > [<c01957d8>] (handle_level_irq) from [<c0190590>] (generic_handle_irq+0x18/0x28) > [<c0190590>] (generic_handle_irq) from [<c0472754>] (combiner_handle_cascade_irq+0x84/0xd4) > [<c0472754>] (combiner_handle_cascade_irq) from [<c0190590>] (generic_handle_irq+0x18/0x28) > [<c0190590>] (generic_handle_irq) from [<c01906ac>] (__handle_domain_irq+0x6c/0xe4) > [<c01906ac>] (__handle_domain_irq) from [<c04733e4>] (gic_handle_irq+0x54/0xa0) > [<c04733e4>] (gic_handle_irq) from [<c0101a70>] (__irq_svc+0x70/0xb0) > Exception stack(0xc1001f28 to 0xc1001f70) > ... > [<c0101a70>] (__irq_svc) from [<c0109edc>] (arch_cpu_idle+0x20/0x44) > [<c0109edc>] (arch_cpu_idle) from [<c015b834>] (do_idle+0x154/0x284) > [<c015b834>] (do_idle) from [<c015bca4>] (cpu_startup_entry+0x18/0x1c) > [<c015bca4>] (cpu_startup_entry) from [<c0f00e1c>] (start_kernel+0x408/0x490) > Code: e7923103 e59f206c ebfdaa09 eaffffd8 (e7f001f2) > ---[ end trace f8c3df0ee70697ef ]--- > Kernel panic - not syncing: Fatal exception in interrupt > > Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> This looks like a workaround for real problem. Workaround for only this specific case and specific device. Other components might hit you later... other boards might experience this as well. These are valid OPP and they probably could be used when Mixer is not used (e.g. no DRM or no HDMI cable plugged in) or when lower resolution is being used. Instead PM QoS interface should be used: Documentation/power/pm_qos_interface.txt Best regards, Krzysztof > --- > arch/arm/boot/dts/exynos4412.dtsi | 16 ---------------- > 1 file changed, 16 deletions(-) > > diff --git a/arch/arm/boot/dts/exynos4412.dtsi b/arch/arm/boot/dts/exynos4412.dtsi > index e5c041ec0756..f01c57cc895e 100644 > --- a/arch/arm/boot/dts/exynos4412.dtsi > +++ b/arch/arm/boot/dts/exynos4412.dtsi > @@ -413,14 +413,6 @@ > compatible = "operating-points-v2"; > opp-shared; > > - opp-100000000 { > - opp-hz = /bits/ 64 <100000000>; > - opp-microvolt = <900000>; > - }; > - opp-134000000 { > - opp-hz = /bits/ 64 <134000000>; > - opp-microvolt = <900000>; > - }; > opp-160000000 { > opp-hz = /bits/ 64 <160000000>; > opp-microvolt = <900000>; > @@ -506,14 +498,6 @@ > compatible = "operating-points-v2"; > opp-shared; > > - opp-100000000 { > - opp-hz = /bits/ 64 <100000000>; > - opp-microvolt = <900000>; > - }; > - opp-134000000 { > - opp-hz = /bits/ 64 <134000000>; > - opp-microvolt = <925000>; > - }; > opp-160000000 { > opp-hz = /bits/ 64 <160000000>; > opp-microvolt = <950000>; > -- > 2.17.1 >
diff --git a/arch/arm/boot/dts/exynos4412.dtsi b/arch/arm/boot/dts/exynos4412.dtsi index e5c041ec0756..f01c57cc895e 100644 --- a/arch/arm/boot/dts/exynos4412.dtsi +++ b/arch/arm/boot/dts/exynos4412.dtsi @@ -413,14 +413,6 @@ compatible = "operating-points-v2"; opp-shared; - opp-100000000 { - opp-hz = /bits/ 64 <100000000>; - opp-microvolt = <900000>; - }; - opp-134000000 { - opp-hz = /bits/ 64 <134000000>; - opp-microvolt = <900000>; - }; opp-160000000 { opp-hz = /bits/ 64 <160000000>; opp-microvolt = <900000>; @@ -506,14 +498,6 @@ compatible = "operating-points-v2"; opp-shared; - opp-100000000 { - opp-hz = /bits/ 64 <100000000>; - opp-microvolt = <900000>; - }; - opp-134000000 { - opp-hz = /bits/ 64 <134000000>; - opp-microvolt = <925000>; - }; opp-160000000 { opp-hz = /bits/ 64 <160000000>; opp-microvolt = <950000>;
On Exynos 4, the 'DMC' and 'leftbus' buses feed the internal buses of the TV display subsystem and the Exynos Mixer hardware modules. When those buses are set below 160MHz, Exynos Mixer is not able to properly handle two XRGB display planes at FullHD-60MHz. DMA underrun happens, which in turn might result in reading data out of the configured buffer, what causes IOMMU page fault and kernel panic. This change fixes the following IOMMU fault, observed, when 2 Mixer planes were enabled: exynos-sysmmu 12e20000.sysmmu: 12c10000.mixer: PAGE FAULT occurred at 0x20fe9000 ------------[ cut here ]------------ kernel BUG at drivers/iommu/exynos-iommu.c:450! Internal error: Oops - BUG: 0 [#1] PREEMPT SMP ARM Modules linked in: CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.1.0-rc1-next-20190320-dirty #5628 Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) PC is at exynos_sysmmu_irq+0x1c8/0x244 LR is at lock_is_held_type+0x80/0x100 ... Process swapper/0 (pid: 0, stack limit = 0xf4b67ceb) Stack: (0xc1001e18 to 0xc1002000) ... [<c0500248>] (exynos_sysmmu_irq) from [<c0190ff8>] (__handle_irq_event_percpu+0x98/0x470) [<c0190ff8>] (__handle_irq_event_percpu) from [<c01913ec>] (handle_irq_event_percpu+0x1c/0x58) [<c01913ec>] (handle_irq_event_percpu) from [<c0191460>] (handle_irq_event+0x38/0x5c) [<c0191460>] (handle_irq_event) from [<c01957d8>] (handle_level_irq+0xc0/0x134) [<c01957d8>] (handle_level_irq) from [<c0190590>] (generic_handle_irq+0x18/0x28) [<c0190590>] (generic_handle_irq) from [<c0472754>] (combiner_handle_cascade_irq+0x84/0xd4) [<c0472754>] (combiner_handle_cascade_irq) from [<c0190590>] (generic_handle_irq+0x18/0x28) [<c0190590>] (generic_handle_irq) from [<c01906ac>] (__handle_domain_irq+0x6c/0xe4) [<c01906ac>] (__handle_domain_irq) from [<c04733e4>] (gic_handle_irq+0x54/0xa0) [<c04733e4>] (gic_handle_irq) from [<c0101a70>] (__irq_svc+0x70/0xb0) Exception stack(0xc1001f28 to 0xc1001f70) ... [<c0101a70>] (__irq_svc) from [<c0109edc>] (arch_cpu_idle+0x20/0x44) [<c0109edc>] (arch_cpu_idle) from [<c015b834>] (do_idle+0x154/0x284) [<c015b834>] (do_idle) from [<c015bca4>] (cpu_startup_entry+0x18/0x1c) [<c015bca4>] (cpu_startup_entry) from [<c0f00e1c>] (start_kernel+0x408/0x490) Code: e7923103 e59f206c ebfdaa09 eaffffd8 (e7f001f2) ---[ end trace f8c3df0ee70697ef ]--- Kernel panic - not syncing: Fatal exception in interrupt Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> --- arch/arm/boot/dts/exynos4412.dtsi | 16 ---------------- 1 file changed, 16 deletions(-)