Message ID | 20190321090110.26506-1-m.szyprowski@samsung.com (mailing list archive) |
---|---|
State | Not Applicable |
Headers | show |
Series | PM / devfreq: exynos-bus: Suspend all devices on system shutdown | expand |
Hi Marek, On 19. 3. 21. 오후 6:01, Marek Szyprowski wrote: > Force all Exynos buses to safe operation points before doing the system > reboot operation. There are board on which some aggressive power saving > operation points are behind the capabilities of the bootloader to properly > reset the hardware and boot the board. This way one can avoid board crash > early after reboot. > > This fixes reboot issue on OdroidU3 board both with eMMC and SD boot. > > Reported-by: Markus Reichl <m.reichl@fivetechno.de> > Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> > --- > This is an alternative to https://patchwork.kernel.org/patch/10781433/ > limited only to Exynos-bus driver. > --- > drivers/devfreq/exynos-bus.c | 8 ++++++++ > 1 file changed, 8 insertions(+) > > diff --git a/drivers/devfreq/exynos-bus.c b/drivers/devfreq/exynos-bus.c > index c25658b26598..486cc5b422f1 100644 > --- a/drivers/devfreq/exynos-bus.c > +++ b/drivers/devfreq/exynos-bus.c > @@ -514,6 +514,13 @@ static int exynos_bus_probe(struct platform_device *pdev) > return ret; > } > > +static void exynos_bus_shutdown(struct platform_device *pdev) > +{ > + struct exynos_bus *bus = dev_get_drvdata(&pdev->dev); > + > + devfreq_suspend_device(bus->devfreq); > +} > + > #ifdef CONFIG_PM_SLEEP > static int exynos_bus_resume(struct device *dev) > { > @@ -556,6 +563,7 @@ MODULE_DEVICE_TABLE(of, exynos_bus_of_match); > > static struct platform_driver exynos_bus_platdrv = { > .probe = exynos_bus_probe, > + .shutdown = exynos_bus_shutdown, > .driver = { > .name = "exynos-bus", > .pm = &exynos_bus_pm, > Actually, I already agreed the previous patch. Also, it looks good to me. Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Hi Chanwoo, On 2019-03-21 10:19, Chanwoo Choi wrote: > On 19. 3. 21. 오후 6:01, Marek Szyprowski wrote: >> Force all Exynos buses to safe operation points before doing the system >> reboot operation. There are board on which some aggressive power saving >> operation points are behind the capabilities of the bootloader to properly >> reset the hardware and boot the board. This way one can avoid board crash >> early after reboot. >> >> This fixes reboot issue on OdroidU3 board both with eMMC and SD boot. >> >> Reported-by: Markus Reichl <m.reichl@fivetechno.de> >> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> >> --- >> This is an alternative to https://patchwork.kernel.org/patch/10781433/ >> limited only to Exynos-bus driver. >> --- >> drivers/devfreq/exynos-bus.c | 8 ++++++++ >> 1 file changed, 8 insertions(+) >> >> diff --git a/drivers/devfreq/exynos-bus.c b/drivers/devfreq/exynos-bus.c >> index c25658b26598..486cc5b422f1 100644 >> --- a/drivers/devfreq/exynos-bus.c >> +++ b/drivers/devfreq/exynos-bus.c >> @@ -514,6 +514,13 @@ static int exynos_bus_probe(struct platform_device *pdev) >> return ret; >> } >> >> +static void exynos_bus_shutdown(struct platform_device *pdev) >> +{ >> + struct exynos_bus *bus = dev_get_drvdata(&pdev->dev); >> + >> + devfreq_suspend_device(bus->devfreq); >> +} >> + >> #ifdef CONFIG_PM_SLEEP >> static int exynos_bus_resume(struct device *dev) >> { >> @@ -556,6 +563,7 @@ MODULE_DEVICE_TABLE(of, exynos_bus_of_match); >> >> static struct platform_driver exynos_bus_platdrv = { >> .probe = exynos_bus_probe, >> + .shutdown = exynos_bus_shutdown, >> .driver = { >> .name = "exynos-bus", >> .pm = &exynos_bus_pm, >> > Actually, I already agreed the previous patch. > Also, it looks good to me. Yes, I know, but MyungJoo had some objections, that's why I prepared alternative version. > Acked-by: Chanwoo Choi <cw00.choi@samsung.com> > Best regards
>Hi Chanwoo, > >On 2019-03-21 10:19, Chanwoo Choi wrote: >> On 19. 3. 21. 오후 6:01, Marek Szyprowski wrote: >>> Force all Exynos buses to safe operation points before doing the system >>> reboot operation. There are board on which some aggressive power saving >>> operation points are behind the capabilities of the bootloader to properly >>> reset the hardware and boot the board. This way one can avoid board crash >>> early after reboot. >>> >>> This fixes reboot issue on OdroidU3 board both with eMMC and SD boot. >>> >>> Reported-by: Markus Reichl <m.reichl@fivetechno.de> >>> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> >>> --- >>> This is an alternative to https://patchwork.kernel.org/patch/10781433/ >>> limited only to Exynos-bus driver. >>> --- >>> drivers/devfreq/exynos-bus.c | 8 ++++++++ >>> 1 file changed, 8 insertions(+) >>> >>> diff --git a/drivers/devfreq/exynos-bus.c b/drivers/devfreq/exynos-bus.c >>> index c25658b26598..486cc5b422f1 100644 >>> --- a/drivers/devfreq/exynos-bus.c >>> +++ b/drivers/devfreq/exynos-bus.c >>> @@ -514,6 +514,13 @@ static int exynos_bus_probe(struct platform_device *pdev) >>> return ret; >>> } >>> >>> +static void exynos_bus_shutdown(struct platform_device *pdev) >>> +{ >>> + struct exynos_bus *bus = dev_get_drvdata(&pdev->dev); >>> + >>> + devfreq_suspend_device(bus->devfreq); >>> +} >>> + >>> #ifdef CONFIG_PM_SLEEP >>> static int exynos_bus_resume(struct device *dev) >>> { >>> @@ -556,6 +563,7 @@ MODULE_DEVICE_TABLE(of, exynos_bus_of_match); >>> >>> static struct platform_driver exynos_bus_platdrv = { >>> .probe = exynos_bus_probe, >>> + .shutdown = exynos_bus_shutdown, >>> .driver = { >>> .name = "exynos-bus", >>> .pm = &exynos_bus_pm, >>> >> Actually, I already agreed the previous patch. >> Also, it looks good to me. > >Yes, I know, but MyungJoo had some objections, that's why I prepared >alternative version. > >> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> >> This has become looking good now :) Acked-by: MyungJoo Ham <myungjoo.ham@samsung.com> Cheers, MyungJoo
diff --git a/drivers/devfreq/exynos-bus.c b/drivers/devfreq/exynos-bus.c index c25658b26598..486cc5b422f1 100644 --- a/drivers/devfreq/exynos-bus.c +++ b/drivers/devfreq/exynos-bus.c @@ -514,6 +514,13 @@ static int exynos_bus_probe(struct platform_device *pdev) return ret; } +static void exynos_bus_shutdown(struct platform_device *pdev) +{ + struct exynos_bus *bus = dev_get_drvdata(&pdev->dev); + + devfreq_suspend_device(bus->devfreq); +} + #ifdef CONFIG_PM_SLEEP static int exynos_bus_resume(struct device *dev) { @@ -556,6 +563,7 @@ MODULE_DEVICE_TABLE(of, exynos_bus_of_match); static struct platform_driver exynos_bus_platdrv = { .probe = exynos_bus_probe, + .shutdown = exynos_bus_shutdown, .driver = { .name = "exynos-bus", .pm = &exynos_bus_pm,
Force all Exynos buses to safe operation points before doing the system reboot operation. There are board on which some aggressive power saving operation points are behind the capabilities of the bootloader to properly reset the hardware and boot the board. This way one can avoid board crash early after reboot. This fixes reboot issue on OdroidU3 board both with eMMC and SD boot. Reported-by: Markus Reichl <m.reichl@fivetechno.de> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> --- This is an alternative to https://patchwork.kernel.org/patch/10781433/ limited only to Exynos-bus driver. --- drivers/devfreq/exynos-bus.c | 8 ++++++++ 1 file changed, 8 insertions(+)