diff mbox series

[6/6] arm64: dts: exynos: add the WiFi/PCIe support to TM2(e) boards

Message ID 20201019094715.15343-7-m.szyprowski@samsung.com (mailing list archive)
State Changes Requested
Headers show
Series [1/6] Documetation: dt-bindings: drop samsung,exynos5440-pcie binding | expand

Commit Message

Marek Szyprowski Oct. 19, 2020, 9:47 a.m. UTC 
From: Jaehoon Chung <jh80.chung@samsung.com>

Add the nodes relevant to PCIe PHY and PCIe support. PCIe is used for the
WiFi interface (Broadcom Limited BCM4358 802.11ac Wireless LAN SoC).

Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
[mszyprow: rewrote commit message, reworked board/generic dts/dtsi split]
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
---
 .../boot/dts/exynos/exynos5433-pinctrl.dtsi   |  2 +-
 .../dts/exynos/exynos5433-tm2-common.dtsi     | 24 ++++++++++++-
 arch/arm64/boot/dts/exynos/exynos5433.dtsi    | 36 +++++++++++++++++++
 3 files changed, 60 insertions(+), 2 deletions(-)

Comments

Krzysztof Kozlowski Oct. 19, 2020, 10:31 a.m. UTC | #1 
On Mon, Oct 19, 2020 at 11:47:15AM +0200, Marek Szyprowski wrote:
> From: Jaehoon Chung <jh80.chung@samsung.com>
> 
> Add the nodes relevant to PCIe PHY and PCIe support. PCIe is used for the
> WiFi interface (Broadcom Limited BCM4358 802.11ac Wireless LAN SoC).
> 
> Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
> [mszyprow: rewrote commit message, reworked board/generic dts/dtsi split]
> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
> ---
>  .../boot/dts/exynos/exynos5433-pinctrl.dtsi   |  2 +-
>  .../dts/exynos/exynos5433-tm2-common.dtsi     | 24 ++++++++++++-
>  arch/arm64/boot/dts/exynos/exynos5433.dtsi    | 36 +++++++++++++++++++
>  3 files changed, 60 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/exynos/exynos5433-pinctrl.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-pinctrl.dtsi
> index 9df7c65593a1..32a6518517e5 100644
> --- a/arch/arm64/boot/dts/exynos/exynos5433-pinctrl.dtsi
> +++ b/arch/arm64/boot/dts/exynos/exynos5433-pinctrl.dtsi
> @@ -329,7 +329,7 @@
>  	};
>  
>  	pcie_bus: pcie_bus {
> -		samsung,pins = "gpr3-4", "gpr3-5", "gpr3-6", "gpr3-7";
> +		samsung,pins = "gpr3-4", "gpr3-5", "gpr3-6";
>  		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
>  		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
>  	};
> diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
> index 829fea23d4ab..ef45ef86c48d 100644
> --- a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
> +++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
> @@ -969,6 +969,25 @@
>  	bus-width = <4>;
>  };
>  
> +&pcie {
> +	status = "okay";
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pcie_bus &pcie_wlanen>;
> +	vdd10-supply = <&ldo6_reg>;
> +	vdd18-supply = <&ldo7_reg>;
> +	assigned-clocks = <&cmu_fsys CLK_MOUT_SCLK_PCIE_100_USER>,
> +			<&cmu_top CLK_MOUT_SCLK_PCIE_100>;
> +	assigned-clock-parents = <&cmu_top CLK_SCLK_PCIE_100_FSYS>,
> +			<&cmu_top CLK_MOUT_BUS_PLL_USER>;
> +	assigned-clock-rates = <0>, <100000000>;
> +	interrupt-map-mask = <0 0 0 0>;
> +	interrupt-map = <0 0 0 0 &gic GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>;
> +};
> +
> +&pcie_phy {
> +	status = "okay";
> +};
> +
>  &ppmu_d0_general {
>  	status = "okay";
>  	events {
> @@ -1085,8 +1104,11 @@
>  	pinctrl-names = "default";
>  	pinctrl-0 = <&initial_ese>;
>  
> +	pcie_wlanen: pcie-wlanen {
> +		PIN(INPUT, gpj2-0, UP, FAST_SR4);
> +	};
> +
>  	initial_ese: initial-state {
> -		PIN(INPUT, gpj2-0, DOWN, FAST_SR1);
>  		PIN(INPUT, gpj2-1, DOWN, FAST_SR1);
>  		PIN(INPUT, gpj2-2, DOWN, FAST_SR1);
>  	};
> diff --git a/arch/arm64/boot/dts/exynos/exynos5433.dtsi b/arch/arm64/boot/dts/exynos/exynos5433.dtsi
> index 8eb4576da8f3..be2d1753d1d1 100644
> --- a/arch/arm64/boot/dts/exynos/exynos5433.dtsi
> +++ b/arch/arm64/boot/dts/exynos/exynos5433.dtsi
> @@ -1029,6 +1029,11 @@
>  			reg = <0x145f0000 0x1038>;
>  		};
>  
> +		syscon_fsys: syscon@156f0000 {
> +			compatible = "syscon";
> +			reg = <0x156f0000 0x1044>;
> +		};
> +
>  		gsc_0: video-scaler@13c00000 {
>  			compatible = "samsung,exynos5433-gsc";
>  			reg = <0x13c00000 0x1000>;
> @@ -1830,6 +1835,37 @@
>  				status = "disabled";
>  			};
>  		};
> +
> +		pcie_phy: pcie-phy@15680000 {
> +			compatible = "samsung,exynos5433-pcie-phy";
> +			reg = <0x15680000 0x1000>;
> +			samsung,pmu-syscon = <&pmu_system_controller>;
> +			samsung,fsys-sysreg = <&syscon_fsys>;
> +			#phy-cells = <0>;
> +			status = "disabled";
> +		};
> +
> +		pcie: pcie@15700000 {
> +			compatible = "samsung,exynos5433-pcie";
> +			reg = <0x156b0000 0x1000>, <0x15700000 0x1000>,
> +			      <0x0c000000 0x1000>;

dtc should complain here:
arch/arm64/boot/dts/exynos/exynos5433.dtsi:1848.23-1868.5: Warning (simple_bus_reg): /soc@0/pcie@15700000: simple-bus unit address format error, expected "156b0000"

> +			reg-names = "elbi", "dbi", "config";

This does not match your own bindings:
pcie@15700000: reg-names:1: 'bdi' was expected
pcie@15700000: 'interrupt-names' is a required property

Best regards,
Krzysztof
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/exynos/exynos5433-pinctrl.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-pinctrl.dtsi
index 9df7c65593a1..32a6518517e5 100644
--- a/arch/arm64/boot/dts/exynos/exynos5433-pinctrl.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos5433-pinctrl.dtsi
@@ -329,7 +329,7 @@ 
 	};
 
 	pcie_bus: pcie_bus {
-		samsung,pins = "gpr3-4", "gpr3-5", "gpr3-6", "gpr3-7";
+		samsung,pins = "gpr3-4", "gpr3-5", "gpr3-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 	};
diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
index 829fea23d4ab..ef45ef86c48d 100644
--- a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
@@ -969,6 +969,25 @@ 
 	bus-width = <4>;
 };
 
+&pcie {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie_bus &pcie_wlanen>;
+	vdd10-supply = <&ldo6_reg>;
+	vdd18-supply = <&ldo7_reg>;
+	assigned-clocks = <&cmu_fsys CLK_MOUT_SCLK_PCIE_100_USER>,
+			<&cmu_top CLK_MOUT_SCLK_PCIE_100>;
+	assigned-clock-parents = <&cmu_top CLK_SCLK_PCIE_100_FSYS>,
+			<&cmu_top CLK_MOUT_BUS_PLL_USER>;
+	assigned-clock-rates = <0>, <100000000>;
+	interrupt-map-mask = <0 0 0 0>;
+	interrupt-map = <0 0 0 0 &gic GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&pcie_phy {
+	status = "okay";
+};
+
 &ppmu_d0_general {
 	status = "okay";
 	events {
@@ -1085,8 +1104,11 @@ 
 	pinctrl-names = "default";
 	pinctrl-0 = <&initial_ese>;
 
+	pcie_wlanen: pcie-wlanen {
+		PIN(INPUT, gpj2-0, UP, FAST_SR4);
+	};
+
 	initial_ese: initial-state {
-		PIN(INPUT, gpj2-0, DOWN, FAST_SR1);
 		PIN(INPUT, gpj2-1, DOWN, FAST_SR1);
 		PIN(INPUT, gpj2-2, DOWN, FAST_SR1);
 	};
diff --git a/arch/arm64/boot/dts/exynos/exynos5433.dtsi b/arch/arm64/boot/dts/exynos/exynos5433.dtsi
index 8eb4576da8f3..be2d1753d1d1 100644
--- a/arch/arm64/boot/dts/exynos/exynos5433.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos5433.dtsi
@@ -1029,6 +1029,11 @@ 
 			reg = <0x145f0000 0x1038>;
 		};
 
+		syscon_fsys: syscon@156f0000 {
+			compatible = "syscon";
+			reg = <0x156f0000 0x1044>;
+		};
+
 		gsc_0: video-scaler@13c00000 {
 			compatible = "samsung,exynos5433-gsc";
 			reg = <0x13c00000 0x1000>;
@@ -1830,6 +1835,37 @@ 
 				status = "disabled";
 			};
 		};
+
+		pcie_phy: pcie-phy@15680000 {
+			compatible = "samsung,exynos5433-pcie-phy";
+			reg = <0x15680000 0x1000>;
+			samsung,pmu-syscon = <&pmu_system_controller>;
+			samsung,fsys-sysreg = <&syscon_fsys>;
+			#phy-cells = <0>;
+			status = "disabled";
+		};
+
+		pcie: pcie@15700000 {
+			compatible = "samsung,exynos5433-pcie";
+			reg = <0x156b0000 0x1000>, <0x15700000 0x1000>,
+			      <0x0c000000 0x1000>;
+			reg-names = "elbi", "dbi", "config";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			#interrupt-cells = <1>;
+			device_type = "pci";
+			interrupts = <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu_fsys CLK_PCIE>,
+			         <&cmu_fsys CLK_PCLK_PCIE_PHY>;
+			clock-names = "pcie", "pcie_bus";
+			num-lanes = <1>;
+			bus-range = <0x00 0xff>;
+			phys = <&pcie_phy>;
+			phy-names = "pcie-phy";
+			ranges = <0x81000000 0 0	  0x0c001000 0 0x00010000>,
+				 <0x82000000 0 0x0c011000 0x0c011000 0 0x03feefff>;
+			status = "disabled";
+		};
 	};
 
 	timer: timer {