diff mbox series

[v5,13/15] scsi: ufs: ufs-exynos: multi-host configuration for exynosauto

Message ID 20211018124216.153072-14-chanho61.park@samsung.com (mailing list archive)
State Not Applicable
Headers show
Series introduce exynosauto v9 ufs driver | expand

Commit Message

Chanho Park Oct. 18, 2021, 12:42 p.m. UTC 
UFS controller of ExynosAuto v9 SoC supports multi-host interface for I/O
virtualization. In general, we're using para-virtualized driver to
support a block device by several virtual machines. However, it should
be relayed by backend driver. Multi-host functionality extends the host
controller by providing register interfaces that can be used by each
VM's ufs drivers respectively. By this, we can provide direct access to
the UFS device for multiple VMs. It's similar with SR-IOV of PCIe.

We divide this M-HCI as PH(Physical Host) and VHs(Virtual Host). The PH
supports all UFSHCI functions(all SAPs) same as conventional UFSHCI but
the VH only supports data transfer function. Thus, except UTP_CMD_SAP and
UTP_TMPSAP, the PH should handle all the physical features.

This patch provides an initial implementation of PH part. M-HCI can
support up to four interfaces(1 for a PH and 3 for VHs) but this patch
initially supports only 1 PH and 1 VH. For this, we uses TASK_TAG[7:5]
field so TASK_TAG[4:0] for 32 doorbel will be supported. After the PH is
initiated, this will send a ready message to VHs through a mailbox
register. The message handler is not fully implemented yet such as
supporting reset / abort cases.

Cc: Alim Akhtar <alim.akhtar@samsung.com>
Cc: Kiwoong Kim <kwmad.kim@samsung.com>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Chanho Park <chanho61.park@samsung.com>
---
 drivers/scsi/ufs/ufs-exynos.c | 68 +++++++++++++++++++++++++++++++++++
 1 file changed, 68 insertions(+)
diff mbox series

Patch

diff --git a/drivers/scsi/ufs/ufs-exynos.c b/drivers/scsi/ufs/ufs-exynos.c
index 2ff9bbd8b821..6e6149d99609 100644
--- a/drivers/scsi/ufs/ufs-exynos.c
+++ b/drivers/scsi/ufs/ufs-exynos.c
@@ -83,6 +83,44 @@ 
 #define UFS_SHARABLE		(UFS_WR_SHARABLE | UFS_RD_SHARABLE)
 #define UFS_SHAREABILITY_OFFSET	0x710
 
+/* Multi-host registers */
+#define MHCTRL			0xC4
+#define MHCTRL_EN_VH_MASK	(0xE)
+#define MHCTRL_EN_VH(vh)	(vh << 1)
+#define PH2VH_MBOX		0xD8
+
+#define MH_MSG_MASK		(0xFF)
+
+#define MH_MSG(id, msg)		((id << 8) | (msg & 0xFF))
+#define MH_MSG_PH_READY		0x1
+#define MH_MSG_VH_READY		0x2
+
+#define ALLOW_INQUIRY		BIT(25)
+#define ALLOW_MODE_SELECT	BIT(24)
+#define ALLOW_MODE_SENSE	BIT(23)
+#define ALLOW_PRE_FETCH		GENMASK(22, 21)
+#define ALLOW_READ_CMD_ALL	GENMASK(20, 18)	/* read_6/10/16 */
+#define ALLOW_READ_BUFFER	BIT(17)
+#define ALLOW_READ_CAPACITY	GENMASK(16, 15)
+#define ALLOW_REPORT_LUNS	BIT(14)
+#define ALLOW_REQUEST_SENSE	BIT(13)
+#define ALLOW_SYNCHRONIZE_CACHE	GENMASK(8, 7)
+#define ALLOW_TEST_UNIT_READY	BIT(6)
+#define ALLOW_UNMAP		BIT(5)
+#define ALLOW_VERIFY		BIT(4)
+#define ALLOW_WRITE_CMD_ALL	GENMASK(3, 1)	/* write_6/10/16 */
+
+#define ALLOW_TRANS_VH_DEFAULT	(ALLOW_INQUIRY | ALLOW_MODE_SELECT | \
+				 ALLOW_MODE_SENSE | ALLOW_PRE_FETCH | \
+				 ALLOW_READ_CMD_ALL | ALLOW_READ_BUFFER | \
+				 ALLOW_READ_CAPACITY | ALLOW_REPORT_LUNS | \
+				 ALLOW_REQUEST_SENSE | ALLOW_SYNCHRONIZE_CACHE | \
+				 ALLOW_TEST_UNIT_READY | ALLOW_UNMAP | \
+				 ALLOW_VERIFY | ALLOW_WRITE_CMD_ALL)
+
+#define HCI_MH_ALLOWABLE_TRAN_OF_VH		0x30C
+#define HCI_MH_IID_IN_TASK_TAG			0X308
+
 enum {
 	UNIPRO_L1_5 = 0,/* PHY Adapter */
 	UNIPRO_L2,	/* Data Link */
@@ -174,6 +212,20 @@  static int exynosauto_ufs_drv_init(struct device *dev, struct exynos_ufs *ufs)
 	return 0;
 }
 
+static int exynosauto_ufs_post_hce_enable(struct exynos_ufs *ufs)
+{
+	struct ufs_hba *hba = ufs->hba;
+
+	/* Enable Virtual Host #1 */
+	ufshcd_rmwl(hba, MHCTRL_EN_VH_MASK, MHCTRL_EN_VH(1), MHCTRL);
+	/* Default VH Transfer permissions */
+	hci_writel(ufs, ALLOW_TRANS_VH_DEFAULT, HCI_MH_ALLOWABLE_TRAN_OF_VH);
+	/* IID information is replaced in TASKTAG[7:5] instead of IID in UCD */
+	hci_writel(ufs, 0x1, HCI_MH_IID_IN_TASK_TAG);
+
+	return 0;
+}
+
 static int exynosauto_ufs_pre_link(struct exynos_ufs *ufs)
 {
 	struct ufs_hba *hba = ufs->hba;
@@ -241,6 +293,20 @@  static int exynosauto_ufs_pre_pwr_change(struct exynos_ufs *ufs,
 	return 0;
 }
 
+static int exynosauto_ufs_post_pwr_change(struct exynos_ufs *ufs,
+					  struct ufs_pa_layer_attr *pwr)
+{
+	struct ufs_hba *hba = ufs->hba;
+	u32 enabled_vh;
+
+	enabled_vh = ufshcd_readl(hba, MHCTRL) & MHCTRL_EN_VH_MASK;
+
+	/* Send physical host ready message to virtual hosts */
+	ufshcd_writel(hba, MH_MSG(enabled_vh, MH_MSG_PH_READY), PH2VH_MBOX);
+
+	return 0;
+}
+
 static int exynos7_ufs_pre_link(struct exynos_ufs *ufs)
 {
 	struct ufs_hba *hba = ufs->hba;
@@ -1416,8 +1482,10 @@  static struct exynos_ufs_drv_data exynosauto_ufs_drvs = {
 				  EXYNOS_UFS_OPT_SKIP_CONFIG_PHY_ATTR |
 				  EXYNOS_UFS_OPT_BROKEN_RX_SEL_IDX,
 	.drv_init		= exynosauto_ufs_drv_init,
+	.post_hce_enable	= exynosauto_ufs_post_hce_enable,
 	.pre_link		= exynosauto_ufs_pre_link,
 	.pre_pwr_change		= exynosauto_ufs_pre_pwr_change,
+	.post_pwr_change	= exynosauto_ufs_post_pwr_change,
 };
 
 static struct exynos_ufs_drv_data exynos_ufs_drvs = {