diff mbox series

[1/2] dt-bindings: i2c: exynos5: add exynosautov9-hsi2c compatible

Message ID 20211111084327.106696-2-jaewon02.kim@samsung.com (mailing list archive)
State Not Applicable
Headers show
Series i2c: exynos5: add support for ExynosAutov9 SoC | expand

Commit Message

Jaewon Kim Nov. 11, 2021, 8:43 a.m. UTC
This patch adds new "samsung,exynosautov9-hsi2c" compatible.
It is for i2c compatible with HSI2C available on Exynos SoC with USI.

Signed-off-by: Jaewon Kim <jaewon02.kim@samsung.com>
---
 Documentation/devicetree/bindings/i2c/i2c-exynos5.txt | 7 +++++++
 1 file changed, 7 insertions(+)

Comments

Krzysztof Kozlowski Nov. 11, 2021, 8:53 a.m. UTC | #1
On 11/11/2021 09:43, Jaewon Kim wrote:
> This patch adds new "samsung,exynosautov9-hsi2c" compatible.
> It is for i2c compatible with HSI2C available on Exynos SoC with USI.
> 
> Signed-off-by: Jaewon Kim <jaewon02.kim@samsung.com>
> ---
>  Documentation/devicetree/bindings/i2c/i2c-exynos5.txt | 7 +++++++
>  1 file changed, 7 insertions(+)
> 

You did not Cc the necessary lists (devicetree). Please use
scripts/get_maintainers.pl to get list of addresses to CC.

Patch itself looks good, so you can resend with:
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>


Best regards,
Krzysztof
Jaewon Kim Nov. 11, 2021, 9:11 a.m. UTC | #2
Hello Krzysztof

> On 11/11/2021 09:43, Jaewon Kim wrote:
> > This patch adds new "samsung,exynosautov9-hsi2c" compatible.
> > It is for i2c compatible with HSI2C available on Exynos SoC with USI.
> >
> > Signed-off-by: Jaewon Kim <jaewon02.kim@samsung.com>
> > ---
> >  Documentation/devicetree/bindings/i2c/i2c-exynos5.txt | 7 +++++++
> >  1 file changed, 7 insertions(+)
> >
> 
> You did not Cc the necessary lists (devicetree). Please use scripts/get_maintainers.pl to get list of
> addresses to CC.
> 
> Patch itself looks good, so you can resend with:
> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
> 
> 
> Best regards,
> Krzysztof

Thanks.
I will add more CC lists in next.
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/i2c/i2c-exynos5.txt b/Documentation/devicetree/bindings/i2c/i2c-exynos5.txt
index 2dbc0b62daa6..39f4067d9d1f 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-exynos5.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-exynos5.txt
@@ -14,6 +14,8 @@  Required properties:
 				on Exynos5260 SoCs.
 	-> "samsung,exynos7-hsi2c", for i2c compatible with HSI2C available
 				on Exynos7 SoCs.
+	-> "samsung,exynosautov9-hsi2c", for i2c compatible with HSI2C available
+				on ExynosAutov9 SoCs.
 
   - reg: physical base address of the controller and length of memory mapped
     region.
@@ -31,6 +33,11 @@  Optional properties:
        at 100khz.
     -> If specified, the bus operates in high-speed mode only if the
        clock-frequency is >= 1Mhz.
+  - samsung,sysreg : system registers controller phandle to control USI.
+    -> If I2C integrated to USI(Universal Serial Interface), this property
+       is required. When using Exynos USI block, it needs to select which type
+       of Serial IPs(UART, SPI, I2C) to use with system register. So, it
+       requires samsung,sysreg phandle and offset value of system register.
 
 Example: