diff mbox series

[-next,1/3] arm-soc: exynos: replace open coded VA->PA conversions

Message ID 20211218085843.212497-2-cuigaosheng1@huawei.com (mailing list archive)
State Not Applicable
Headers show
Series replace open coded VA->PA calculation | expand

Commit Message

cuigaosheng Dec. 18, 2021, 8:58 a.m. UTC
From: Ard Biesheuvel <ard.biesheuvel@linaro.org>

This replaces a couple of open coded calculations to obtain the
physical address of a far symbol with calls to the new adr_l etc
macros.

Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
---
 arch/arm/mach-exynos/headsmp.S |  9 +--------
 arch/arm/mach-exynos/sleep.S   | 26 +++++---------------------
 2 files changed, 6 insertions(+), 29 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm/mach-exynos/headsmp.S b/arch/arm/mach-exynos/headsmp.S
index 0ac2cb9a7355..be7cd0eebe1d 100644
--- a/arch/arm/mach-exynos/headsmp.S
+++ b/arch/arm/mach-exynos/headsmp.S
@@ -19,10 +19,7 @@  ENTRY(exynos4_secondary_startup)
 ARM_BE8(setend	be)
 	mrc	p15, 0, r0, c0, c0, 5
 	and	r0, r0, #15
-	adr	r4, 1f
-	ldmia	r4, {r5, r6}
-	sub	r4, r4, r5
-	add	r6, r6, r4
+	adr_l	r6, exynos_pen_release
 pen:	ldr	r7, [r6]
 	cmp	r7, r0
 	bne	pen
@@ -33,7 +30,3 @@  pen:	ldr	r7, [r6]
 	 */
 	b	secondary_startup
 ENDPROC(exynos4_secondary_startup)
-
-	.align 2
-1:	.long	.
-	.long	exynos_pen_release
diff --git a/arch/arm/mach-exynos/sleep.S b/arch/arm/mach-exynos/sleep.S
index ed93f91853b8..ed27515a4458 100644
--- a/arch/arm/mach-exynos/sleep.S
+++ b/arch/arm/mach-exynos/sleep.S
@@ -8,6 +8,7 @@ 
 
 #include <linux/linkage.h>
 #include <asm/asm-offsets.h>
+#include <asm/assembler.h>
 #include <asm/hardware/cache-l2x0.h>
 #include "smc.h"
 
@@ -54,19 +55,13 @@  ENTRY(exynos_cpu_resume_ns)
 	cmp	r0, r1
 	bne	skip_cp15
 
-	adr	r0, _cp15_save_power
-	ldr	r1, [r0]
-	ldr	r1, [r0, r1]
-	adr	r0, _cp15_save_diag
-	ldr	r2, [r0]
-	ldr	r2, [r0, r2]
+	ldr_l	r1, cp15_save_power
+	ldr_l	r2, cp15_save_diag
 	mov	r0, #SMC_CMD_C15RESUME
 	dsb
 	smc	#0
 #ifdef CONFIG_CACHE_L2X0
-	adr	r0, 1f
-	ldr	r2, [r0]
-	add	r0, r2, r0
+	adr_l	r0, l2x0_saved_regs
 
 	/* Check that the address has been initialised. */
 	ldr	r1, [r0, #L2X0_R_PHY_BASE]
@@ -85,9 +80,7 @@  ENTRY(exynos_cpu_resume_ns)
 	smc	#0
 
 	/* Reload saved regs pointer because smc corrupts registers. */
-	adr	r0, 1f
-	ldr	r2, [r0]
-	add	r0, r2, r0
+	adr_l	r0, l2x0_saved_regs
 
 	ldr	r1, [r0, #L2X0_R_PWR_CTRL]
 	ldr	r2, [r0, #L2X0_R_AUX_CTRL]
@@ -106,15 +99,6 @@  skip_cp15:
 	b	cpu_resume
 ENDPROC(exynos_cpu_resume_ns)
 
-	.align
-_cp15_save_power:
-	.long	cp15_save_power - .
-_cp15_save_diag:
-	.long	cp15_save_diag - .
-#ifdef CONFIG_CACHE_L2X0
-1:	.long	l2x0_saved_regs - .
-#endif /* CONFIG_CACHE_L2X0 */
-
 	.data
 	.align	2
 	.globl cp15_save_diag