| Message ID | 20220110152714.58220-2-jagan@amarulasolutions.com (mailing list archive) |
|---|---|
| State | New |
| Headers | show |
| Series | [1/2] arm64: dts: exynos: Link DSI panel at port@1 for TM2 board | expand |
diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts b/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts index 22d26460f3dd..09418fe30353 100644 --- a/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts +++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts @@ -51,6 +51,16 @@ &cmu_disp { }; &dsi { + ports { + port@1 { + reg = <1>; + + dsi_out_panel: endpoint { + remote-endpoint = <&dsi_in_panel>; + }; + }; + }; + panel@0 { compatible = "samsung,s6e3hf2"; reg = <0>; @@ -58,6 +68,12 @@ panel@0 { vci-supply = <&ldo28_reg>; reset-gpios = <&gpg0 0 GPIO_ACTIVE_LOW>; enable-gpios = <&gpf1 5 GPIO_ACTIVE_HIGH>; + + port { + dsi_in_panel: endpoint { + remote-endpoint = <&dsi_out_panel>; + }; + }; }; };
TM2E board DSI pipeline has input from MIC and output to s6e3ha2 panel. The existing pipeline has child nodes of ports, panel and MIC is remote-endpoint reference of port@0 of ports. Adding panel as another child node to DSI is unconventional as pipeline has ports child. However it can be true if MIC is added inside port node like this. dsi { compatible = "samsung,exynos5433-mipi-dsi"; #address-cells = <1>; #size-cells = <0>; port { dsi_to_mic: endpoint { remote-endpoint = <&mic_to_dsi>; }; }; panel@0 { compatible = "samsung,s6e3hf2"; reg = <0>; vdd3-supply = <&ldo27_reg>; vci-supply = <&ldo28_reg>; reset-gpios = <&gpg0 0 GPIO_ACTIVE_LOW>; enable-gpios = <&gpf1 5 GPIO_ACTIVE_HIGH>; }; }; The above pipeline is proper but it requires the DSI input MIC pipeline to update. This patch is trying to add panel at port@1 so-that the entire pipeline before to panel output is untouched. Reported-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> --- arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts | 16 ++++++++++++++++ 1 file changed, 16 insertions(+)