diff mbox series

[5/7] clk: samsung: exynos850: Add suspend state for all CMUs

Message ID 20230308233822.31180-6-semen.protsenko@linaro.org (mailing list archive)
State New
Headers show
Series clk: samsung: Enable PM in Exynos850 clk driver | expand

Commit Message

Sam Protsenko March 8, 2023, 11:38 p.m. UTC 
Before entering suspend, some clocks must be set to some specific
configuration. For example, top-level MUX clocks in each CMU should be
switched to OSCCLK input, etc. This is needed by the firmware to
properly perform system suspend operation. Provide the suspend state for
mentioned clocks using 'suspend_regs' feature.

This patch was inspired by commit a766065279e2 ("clk: samsung:
exynos5433: Add suspend state for TOP, CPIF & PERIC CMUs").

Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
---
 drivers/clk/samsung/clk-exynos850.c | 92 +++++++++++++++++++++++++++++
 1 file changed, 92 insertions(+)
diff mbox series

Patch

diff --git a/drivers/clk/samsung/clk-exynos850.c b/drivers/clk/samsung/clk-exynos850.c
index 98b23af7324d..5664d17bae83 100644
--- a/drivers/clk/samsung/clk-exynos850.c
+++ b/drivers/clk/samsung/clk-exynos850.c
@@ -186,6 +186,12 @@  static const unsigned long top_clk_regs[] __initconst = {
 	CLK_CON_GAT_GATE_CLKCMU_PERI_UART,
 };
 
+static const struct samsung_clk_reg_dump top_suspend_regs[] = {
+	{ PLL_CON0_PLL_MMC, 0 },
+	{ PLL_CON0_PLL_SHARED0, 0 },
+	{ PLL_CON0_PLL_SHARED1, 0 },
+};
+
 /*
  * Do not provide PLL tables to core PLLs, as MANUAL_PLL_CTRL bit is not set
  * for those PLLs by default, so set_rate operation would fail.
@@ -489,6 +495,8 @@  static const struct samsung_cmu_info top_cmu_info __initconst = {
 	.nr_clk_ids		= TOP_NR_CLK,
 	.clk_regs		= top_clk_regs,
 	.nr_clk_regs		= ARRAY_SIZE(top_clk_regs),
+	.suspend_regs		= top_suspend_regs,
+	.nr_suspend_regs	= ARRAY_SIZE(top_suspend_regs),
 };
 
 static void __init exynos850_cmu_top_init(struct device_node *np)
@@ -547,6 +555,13 @@  static const unsigned long apm_clk_regs[] __initconst = {
 	CLK_CON_GAT_GOUT_APM_SYSREG_APM_PCLK,
 };
 
+static const struct samsung_clk_reg_dump apm_suspend_regs[] = {
+	{ PLL_CON0_MUX_CLKCMU_APM_BUS_USER, 0 },
+	{ PLL_CON0_MUX_CLK_RCO_APM_I3C_USER, 0 },
+	{ PLL_CON0_MUX_CLK_RCO_APM_USER, 0 },
+	{ PLL_CON0_MUX_DLL_USER, 0 },
+};
+
 /* List of parent clocks for Muxes in CMU_APM */
 PNAME(mout_apm_bus_user_p)	= { "oscclk_rco_apm", "dout_clkcmu_apm_bus" };
 PNAME(mout_rco_apm_i3c_user_p)	= { "oscclk_rco_apm", "clk_rco_i3c_pmic" };
@@ -629,6 +644,8 @@  static const struct samsung_cmu_info apm_cmu_info __initconst = {
 	.nr_clk_ids		= APM_NR_CLK,
 	.clk_regs		= apm_clk_regs,
 	.nr_clk_regs		= ARRAY_SIZE(apm_clk_regs),
+	.suspend_regs		= apm_suspend_regs,
+	.nr_suspend_regs	= ARRAY_SIZE(apm_suspend_regs),
 	.clk_name		= "dout_clkcmu_apm_bus",
 };
 
@@ -746,6 +763,12 @@  static const unsigned long aud_clk_regs[] __initconst = {
 	CLK_CON_GAT_GOUT_AUD_WDT_PCLK,
 };
 
+static const struct samsung_clk_reg_dump aud_suspend_regs[] = {
+	{ PLL_CON0_PLL_AUD, 0 },
+	{ PLL_CON0_MUX_CLKCMU_AUD_CPU_USER, 0 },
+	{ PLL_CON0_MUX_TICK_USB_USER, 0 },
+};
+
 /* List of parent clocks for Muxes in CMU_AUD */
 PNAME(mout_aud_pll_p)		= { "oscclk", "fout_aud_pll" };
 PNAME(mout_aud_cpu_user_p)	= { "oscclk", "dout_aud" };
@@ -912,6 +935,8 @@  static const struct samsung_cmu_info aud_cmu_info __initconst = {
 	.nr_clk_ids		= AUD_NR_CLK,
 	.clk_regs		= aud_clk_regs,
 	.nr_clk_regs		= ARRAY_SIZE(aud_clk_regs),
+	.suspend_regs		= aud_suspend_regs,
+	.nr_suspend_regs	= ARRAY_SIZE(aud_suspend_regs),
 	.clk_name		= "dout_aud",
 };
 
@@ -950,6 +975,12 @@  static const unsigned long cmgp_clk_regs[] __initconst = {
 	CLK_CON_GAT_GOUT_CMGP_USI_CMGP1_PCLK,
 };
 
+static const struct samsung_clk_reg_dump cmgp_suspend_regs[] = {
+	{ CLK_CON_MUX_CLK_CMGP_ADC, 0 },
+	{ CLK_CON_MUX_MUX_CLK_CMGP_USI_CMGP0, 0 },
+	{ CLK_CON_MUX_MUX_CLK_CMGP_USI_CMGP1, 0 },
+};
+
 /* List of parent clocks for Muxes in CMU_CMGP */
 PNAME(mout_cmgp_usi0_p)	= { "clk_rco_cmgp", "gout_clkcmu_cmgp_bus" };
 PNAME(mout_cmgp_usi1_p)	= { "clk_rco_cmgp", "gout_clkcmu_cmgp_bus" };
@@ -1015,6 +1046,8 @@  static const struct samsung_cmu_info cmgp_cmu_info __initconst = {
 	.nr_clk_ids		= CMGP_NR_CLK,
 	.clk_regs		= cmgp_clk_regs,
 	.nr_clk_regs		= ARRAY_SIZE(cmgp_clk_regs),
+	.suspend_regs		= cmgp_suspend_regs,
+	.nr_suspend_regs	= ARRAY_SIZE(cmgp_suspend_regs),
 	.clk_name		= "gout_clkcmu_cmgp_bus",
 };
 
@@ -1051,6 +1084,11 @@  static const unsigned long g3d_clk_regs[] __initconst = {
 	CLK_CON_GAT_GOUT_G3D_SYSREG_PCLK,
 };
 
+static const struct samsung_clk_reg_dump g3d_suspend_regs[] = {
+	{ PLL_CON0_PLL_G3D, 0 },
+	{ PLL_CON0_MUX_CLKCMU_G3D_SWITCH_USER, 0 },
+};
+
 /* List of parent clocks for Muxes in CMU_G3D */
 PNAME(mout_g3d_pll_p)		= { "oscclk", "fout_g3d_pll" };
 PNAME(mout_g3d_switch_user_p)	= { "oscclk", "dout_g3d_switch" };
@@ -1111,6 +1149,8 @@  static const struct samsung_cmu_info g3d_cmu_info __initconst = {
 	.nr_clk_ids		= G3D_NR_CLK,
 	.clk_regs		= g3d_clk_regs,
 	.nr_clk_regs		= ARRAY_SIZE(g3d_clk_regs),
+	.suspend_regs		= g3d_suspend_regs,
+	.nr_suspend_regs	= ARRAY_SIZE(g3d_suspend_regs),
 	.clk_name		= "dout_g3d_switch",
 };
 
@@ -1153,6 +1193,13 @@  static const unsigned long hsi_clk_regs[] __initconst = {
 	CLK_CON_GAT_GOUT_HSI_USB20DRD_TOP_BUS_CLK_EARLY,
 };
 
+static const struct samsung_clk_reg_dump hsi_suspend_regs[] = {
+	{ PLL_CON0_MUX_CLKCMU_HSI_BUS_USER, 0 },
+	{ PLL_CON0_MUX_CLKCMU_HSI_MMC_CARD_USER, 0 },
+	{ PLL_CON0_MUX_CLKCMU_HSI_USB20DRD_USER, 0 },
+	{ CLK_CON_MUX_MUX_CLK_HSI_RTC, 0 },
+};
+
 /* List of parent clocks for Muxes in CMU_HSI */
 PNAME(mout_hsi_bus_user_p)	= { "oscclk", "dout_hsi_bus" };
 PNAME(mout_hsi_mmc_card_user_p)	= { "oscclk", "dout_hsi_mmc_card" };
@@ -1213,6 +1260,8 @@  static const struct samsung_cmu_info hsi_cmu_info __initconst = {
 	.nr_clk_ids		= HSI_NR_CLK,
 	.clk_regs		= hsi_clk_regs,
 	.nr_clk_regs		= ARRAY_SIZE(hsi_clk_regs),
+	.suspend_regs		= hsi_suspend_regs,
+	.nr_suspend_regs	= ARRAY_SIZE(hsi_suspend_regs),
 	.clk_name		= "dout_hsi_bus",
 };
 
@@ -1268,6 +1317,13 @@  static const unsigned long is_clk_regs[] __initconst = {
 	CLK_CON_GAT_GOUT_IS_SYSREG_PCLK,
 };
 
+static const struct samsung_clk_reg_dump is_suspend_regs[] = {
+	{ PLL_CON0_MUX_CLKCMU_IS_BUS_USER, 0 },
+	{ PLL_CON0_MUX_CLKCMU_IS_GDC_USER, 0 },
+	{ PLL_CON0_MUX_CLKCMU_IS_ITP_USER, 0 },
+	{ PLL_CON0_MUX_CLKCMU_IS_VRA_USER, 0 },
+};
+
 /* List of parent clocks for Muxes in CMU_IS */
 PNAME(mout_is_bus_user_p)	= { "oscclk", "dout_is_bus" };
 PNAME(mout_is_itp_user_p)	= { "oscclk", "dout_is_itp" };
@@ -1345,6 +1401,8 @@  static const struct samsung_cmu_info is_cmu_info __initconst = {
 	.nr_clk_ids		= IS_NR_CLK,
 	.clk_regs		= is_clk_regs,
 	.nr_clk_regs		= ARRAY_SIZE(is_clk_regs),
+	.suspend_regs		= is_suspend_regs,
+	.nr_suspend_regs	= ARRAY_SIZE(is_suspend_regs),
 	.clk_name		= "dout_is_bus",
 };
 
@@ -1384,6 +1442,13 @@  static const unsigned long mfcmscl_clk_regs[] __initconst = {
 	CLK_CON_GAT_GOUT_MFCMSCL_SYSREG_PCLK,
 };
 
+static const struct samsung_clk_reg_dump mfcmscl_suspend_regs[] = {
+	{ PLL_CON0_MUX_CLKCMU_MFCMSCL_JPEG_USER, 0 },
+	{ PLL_CON0_MUX_CLKCMU_MFCMSCL_M2M_USER, 0 },
+	{ PLL_CON0_MUX_CLKCMU_MFCMSCL_MCSC_USER, 0 },
+	{ PLL_CON0_MUX_CLKCMU_MFCMSCL_MFC_USER, 0 },
+};
+
 /* List of parent clocks for Muxes in CMU_MFCMSCL */
 PNAME(mout_mfcmscl_mfc_user_p)	= { "oscclk", "dout_mfcmscl_mfc" };
 PNAME(mout_mfcmscl_m2m_user_p)	= { "oscclk", "dout_mfcmscl_m2m" };
@@ -1454,6 +1519,8 @@  static const struct samsung_cmu_info mfcmscl_cmu_info __initconst = {
 	.nr_clk_ids		= MFCMSCL_NR_CLK,
 	.clk_regs		= mfcmscl_clk_regs,
 	.nr_clk_regs		= ARRAY_SIZE(mfcmscl_clk_regs),
+	.suspend_regs		= mfcmscl_suspend_regs,
+	.nr_suspend_regs	= ARRAY_SIZE(mfcmscl_suspend_regs),
 	.clk_name		= "dout_mfcmscl_mfc",
 };
 
@@ -1532,6 +1599,13 @@  static const unsigned long peri_clk_regs[] __initconst = {
 	CLK_CON_GAT_GOUT_PERI_WDT_1_PCLK,
 };
 
+static const struct samsung_clk_reg_dump peri_suspend_regs[] = {
+	{ PLL_CON0_MUX_CLKCMU_PERI_BUS_USER, 0 },
+	{ PLL_CON0_MUX_CLKCMU_PERI_HSI2C_USER, 0 },
+	{ PLL_CON0_MUX_CLKCMU_PERI_SPI_USER, 0 },
+	{ PLL_CON0_MUX_CLKCMU_PERI_UART_USER, 0 },
+};
+
 /* List of parent clocks for Muxes in CMU_PERI */
 PNAME(mout_peri_bus_user_p)	= { "oscclk", "dout_peri_bus" };
 PNAME(mout_peri_uart_user_p)	= { "oscclk", "dout_peri_uart" };
@@ -1629,6 +1703,8 @@  static const struct samsung_cmu_info peri_cmu_info __initconst = {
 	.nr_clk_ids		= PERI_NR_CLK,
 	.clk_regs		= peri_clk_regs,
 	.nr_clk_regs		= ARRAY_SIZE(peri_clk_regs),
+	.suspend_regs		= peri_suspend_regs,
+	.nr_suspend_regs	= ARRAY_SIZE(peri_suspend_regs),
 	.clk_name		= "dout_peri_bus",
 };
 
@@ -1676,6 +1752,14 @@  static const unsigned long core_clk_regs[] __initconst = {
 	CLK_CON_GAT_GOUT_CORE_SYSREG_CORE_PCLK,
 };
 
+static const struct samsung_clk_reg_dump core_suspend_regs[] = {
+	{ PLL_CON0_MUX_CLKCMU_CORE_BUS_USER, 0 },
+	{ PLL_CON0_MUX_CLKCMU_CORE_CCI_USER, 0 },
+	{ PLL_CON0_MUX_CLKCMU_CORE_MMC_EMBD_USER, 0 },
+	{ PLL_CON0_MUX_CLKCMU_CORE_SSS_USER, 0 },
+	{ CLK_CON_MUX_MUX_CLK_CORE_GIC, 0x1 },
+};
+
 /* List of parent clocks for Muxes in CMU_CORE */
 PNAME(mout_core_bus_user_p)		= { "oscclk", "dout_core_bus" };
 PNAME(mout_core_cci_user_p)		= { "oscclk", "dout_core_cci" };
@@ -1736,6 +1820,8 @@  static const struct samsung_cmu_info core_cmu_info __initconst = {
 	.nr_clk_ids		= CORE_NR_CLK,
 	.clk_regs		= core_clk_regs,
 	.nr_clk_regs		= ARRAY_SIZE(core_clk_regs),
+	.suspend_regs		= core_suspend_regs,
+	.nr_suspend_regs	= ARRAY_SIZE(core_suspend_regs),
 	.clk_name		= "dout_core_bus",
 };
 
@@ -1766,6 +1852,10 @@  static const unsigned long dpu_clk_regs[] __initconst = {
 	CLK_CON_GAT_GOUT_DPU_SYSREG_PCLK,
 };
 
+static const struct samsung_clk_reg_dump dpu_suspend_regs[] = {
+	{ PLL_CON0_MUX_CLKCMU_DPU_USER, 0 },
+};
+
 /* List of parent clocks for Muxes in CMU_DPU */
 PNAME(mout_dpu_user_p)		= { "oscclk", "dout_dpu" };
 
@@ -1810,6 +1900,8 @@  static const struct samsung_cmu_info dpu_cmu_info __initconst = {
 	.nr_clk_ids		= DPU_NR_CLK,
 	.clk_regs		= dpu_clk_regs,
 	.nr_clk_regs		= ARRAY_SIZE(dpu_clk_regs),
+	.suspend_regs		= dpu_suspend_regs,
+	.nr_suspend_regs	= ARRAY_SIZE(dpu_suspend_regs),
 	.clk_name		= "dout_dpu",
 };