| Message ID | 20240125145007.748295-28-tudor.ambarus@linaro.org (mailing list archive) |
|---|---|
| State | New |
| Headers | show |
| Series | spi: s3c64xx: winter cleanup and gs101 support | expand |
On Thu, Jan 25, 2024 at 8:50 AM Tudor Ambarus <tudor.ambarus@linaro.org> wrote: > > Add support for GS101 SPI. All the SPI nodes on GS101 have 64 bytes > FIFOs, infer the FIFO size from the compatible. GS101 allows just 32bit > register accesses, otherwise a Serror Interrupt is raised. Do the write > reg accesses in 32 bits. > > Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org> > --- > drivers/spi/spi-s3c64xx.c | 16 ++++++++++++++++ > 1 file changed, 16 insertions(+) > > diff --git a/drivers/spi/spi-s3c64xx.c b/drivers/spi/spi-s3c64xx.c > index 35a2d5554dfd..e887be6955a0 100644 > --- a/drivers/spi/spi-s3c64xx.c > +++ b/drivers/spi/spi-s3c64xx.c > @@ -1501,6 +1501,18 @@ static const struct s3c64xx_spi_port_config exynosautov9_spi_port_config = { > .quirks = S3C64XX_SPI_QUIRK_CS_AUTO, > }; > > +static const struct s3c64xx_spi_port_config gs101_spi_port_config = { > + .fifosize = 64, > + .rx_lvl_offset = 15, > + .tx_st_done = 25, > + .clk_div = 4, > + .high_speed = true, > + .clk_from_cmu = true, > + .has_loopback = true, > + .use_32bit_io = true, > + .quirks = S3C64XX_SPI_QUIRK_CS_AUTO, > +}; > + > static const struct s3c64xx_spi_port_config fsd_spi_port_config = { > .fifosize = 64, > .rx_lvl_offset = 15, > @@ -1556,6 +1568,10 @@ static const struct of_device_id s3c64xx_spi_dt_match[] = { > .compatible = "samsung,exynosautov9-spi", > .data = &exynosautov9_spi_port_config, > }, > + { As I mentioned before, this braces style looks too bloated to me. Other than that: Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org> > + .compatible = "google,gs101-spi", > + .data = &gs101_spi_port_config, > + }, > { > .compatible = "tesla,fsd-spi", > .data = &fsd_spi_port_config, > -- > 2.43.0.429.g432eaa2c6b-goog >
diff --git a/drivers/spi/spi-s3c64xx.c b/drivers/spi/spi-s3c64xx.c index 35a2d5554dfd..e887be6955a0 100644 --- a/drivers/spi/spi-s3c64xx.c +++ b/drivers/spi/spi-s3c64xx.c @@ -1501,6 +1501,18 @@ static const struct s3c64xx_spi_port_config exynosautov9_spi_port_config = { .quirks = S3C64XX_SPI_QUIRK_CS_AUTO, }; +static const struct s3c64xx_spi_port_config gs101_spi_port_config = { + .fifosize = 64, + .rx_lvl_offset = 15, + .tx_st_done = 25, + .clk_div = 4, + .high_speed = true, + .clk_from_cmu = true, + .has_loopback = true, + .use_32bit_io = true, + .quirks = S3C64XX_SPI_QUIRK_CS_AUTO, +}; + static const struct s3c64xx_spi_port_config fsd_spi_port_config = { .fifosize = 64, .rx_lvl_offset = 15, @@ -1556,6 +1568,10 @@ static const struct of_device_id s3c64xx_spi_dt_match[] = { .compatible = "samsung,exynosautov9-spi", .data = &exynosautov9_spi_port_config, }, + { + .compatible = "google,gs101-spi", + .data = &gs101_spi_port_config, + }, { .compatible = "tesla,fsd-spi", .data = &fsd_spi_port_config,
Add support for GS101 SPI. All the SPI nodes on GS101 have 64 bytes FIFOs, infer the FIFO size from the compatible. GS101 allows just 32bit register accesses, otherwise a Serror Interrupt is raised. Do the write reg accesses in 32 bits. Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org> --- drivers/spi/spi-s3c64xx.c | 16 ++++++++++++++++ 1 file changed, 16 insertions(+)