diff mbox series

[2/4] arm64: dts: exynos: gs101: specify bus clock for pinctrl_peric[01]

Message ID 20240429-samsung-pinctrl-busclock-dts-v1-2-5e935179f3ca@linaro.org (mailing list archive)
State Accepted
Commit 42e3f188b238b7fb1c42dee8b4dc4107cbb321e2
Headers show
Series hook up pin controller clocks on Google Tensor gs101 | expand

Commit Message

André Draszik April 29, 2024, 8:04 p.m. UTC 
This bus clock is needed for pinctrl register access to work. Add it.

Signed-off-by: André Draszik <andre.draszik@linaro.org>
---
 arch/arm64/boot/dts/exynos/google/gs101.dtsi | 4 ++++
 1 file changed, 4 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/exynos/google/gs101.dtsi b/arch/arm64/boot/dts/exynos/google/gs101.dtsi
index f2c7c2a4ce1c..8d4216cbab2e 100644
--- a/arch/arm64/boot/dts/exynos/google/gs101.dtsi
+++ b/arch/arm64/boot/dts/exynos/google/gs101.dtsi
@@ -370,6 +370,8 @@  sysreg_peric0: syscon@10820000 {
 		pinctrl_peric0: pinctrl@10840000 {
 			compatible = "google,gs101-pinctrl";
 			reg = <0x10840000 0x00001000>;
+			clocks = <&cmu_peric0 CLK_GOUT_PERIC0_GPIO_PERIC0_PCLK>;
+			clock-names = "pclk";
 			interrupts = <GIC_SPI 625 IRQ_TYPE_LEVEL_HIGH 0>;
 		};
 
@@ -914,6 +916,8 @@  sysreg_peric1: syscon@10c20000 {
 		pinctrl_peric1: pinctrl@10c40000 {
 			compatible = "google,gs101-pinctrl";
 			reg = <0x10c40000 0x00001000>;
+			clocks = <&cmu_peric1 CLK_GOUT_PERIC1_GPIO_PERIC1_PCLK>;
+			clock-names = "pclk";
 			interrupts = <GIC_SPI 644 IRQ_TYPE_LEVEL_HIGH 0>;
 		};