From patchwork Sat May 25 13:28:09 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Patchwork-Submitter: Artur Weber X-Patchwork-Id: 13674030 Received: from mail-ej1-f42.google.com (mail-ej1-f42.google.com [209.85.218.42]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id DE0FE5A7AA; Sat, 25 May 2024 13:28:14 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=209.85.218.42 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1716643696; cv=none; b=rac7bjthRnhFUYdQFCg2kEmsSr4/g52ZaV7Z4xss1xXYKL2oyyvdPZyXLx9+VyUD5Ha5WMVtat3j+hFjsXuritoj6XmwrisGaUeDR2FBCRg10TVHH1WdGuRR48XdrELl7/X0H3+W5AOJ+39VqvQ3wzQWRG4UKvY2fAwLayXZs3w= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1716643696; c=relaxed/simple; bh=s6HoX2bIiyeFHVO8H4gwhbEs3zH4TzKxdBruCqDrxxM=; h=From:Date:Subject:MIME-Version:Content-Type:Message-Id:References: In-Reply-To:To:Cc; b=qFr3SiDY2bhVAvd2RdW37PVOYkGii29D4gvicgMonI7VIoashrdr0owtQ0W1YWaKMnMm6xbBUO6mXBxM8F1F2SnoNNOAhk3+c7YTg30hh1DbRWVTC7OEjaktS52CS2d49JRxcEQqFvS/jqKq0LyX0JHDmaUJZi0x9MkJHxvXHM8= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=gmail.com; spf=pass smtp.mailfrom=gmail.com; dkim=pass (2048-bit key) header.d=gmail.com header.i=@gmail.com header.b=JAVCptoL; arc=none smtp.client-ip=209.85.218.42 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=gmail.com Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=gmail.com Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=gmail.com header.i=@gmail.com header.b="JAVCptoL" Received: by mail-ej1-f42.google.com with SMTP id a640c23a62f3a-a62972c88a9so79487266b.1; Sat, 25 May 2024 06:28:14 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20230601; t=1716643693; x=1717248493; darn=vger.kernel.org; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:from:to:cc:subject:date:message-id :reply-to; bh=TfSzPmCK68b0JNLz1J5pRMBlqdzsamJqc1HopdzeGIc=; b=JAVCptoLwY7KVfpPV1oaUGQ0LslexZdinbk2ovhIO8wY6N/TrSSMKfmMGxy9DFPMTb YqdS8Z0hBbKylRroWD3D6r4QiZL5jaRsFFUyL03FzDXG45tExkXvGHxBPL/kPbG/sf5Q BI0cGmfQQ2ATfYfKUhgWYd3qIX+ut7Arb5cTtRn1renUdQIPplkxftzzN7UmAEpfBccU k8+nQW7rK2ZkeyuLS2FJ3TsN5FIHFnvcfZAErKvGg/bsm22Ez4bzuJUOZo1B3MxzRHtV Vi9MIh+QxcXwFnebYI0EBefzjzbuknp6xwpoghYTOUpUizmZPF6lASTLtQ17cXmRs2GN ODnQ== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20230601; t=1716643693; x=1717248493; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=TfSzPmCK68b0JNLz1J5pRMBlqdzsamJqc1HopdzeGIc=; b=simY43QrImBXsMFP+hodwEHdAbJpPSeCWgaFmWy9sM8BDRK6QCcewVamPGq+lcUztS JpdBIX12dhdo1pPLfsYjKV8ppbVUrZLb4DcLmdJAn5np74iqdUp9HEBhVG6EbkCym5Vg rgA6DfOTMztHb0t8Ff5mnm1yzOC7y6sKJz/Oj1jQEYE9MccPOEcPt3+dhgoKUmOfoMhj uXmZ9jnLxa76Rb84etPhTF04zMXKNzvTv6JwEmR8n/7mIFuCjApZ3+Y+zOpp8lYxPLLQ hqYdAltykEwzIGioeh4dDVvkYq239X34/kKoMlPBjM///11EspcA99SwzgQfvKfDrm2g mw0Q== X-Forwarded-Encrypted: i=1; AJvYcCV9aV8wtSOuH2T4lN5WM6/z9nJfwydEMJD1ty7D4f+hZutlfyOIj4Zc/L6aK1qAevWH5EIb8Mzt6/vb8N3iLwVZjLp3RuKWUYgf2CVMgoYVL3N/W3JWoDgVOsENUAbOKcAssJGVPWPBTG1UbbcLFX0rFVW8cTBkdN2zkBAqca9CmktI0M7tAq5qcu2Uxim56rHuz7ll0Ttl0eO7O9NqmLhmHDM8BFMy+sg= X-Gm-Message-State: AOJu0YxCoALkylMz3y1pmaKqVezPcg9+YqOTJccdvs4BwPxY/3l4tqV3 9lbrgZBn6pSEG98t3vqrmcXMaFN+bqyzNkinq4icV5mAkgV7AX3u X-Google-Smtp-Source: AGHT+IFTulOMAAWAFYVawyA9CX1rwCDs913hmmjoXg2cqQVwzwHIm+Ktr45CM5qcWPO00OeYHrq0RQ== X-Received: by 2002:a17:907:170c:b0:a59:efd3:9d with SMTP id a640c23a62f3a-a628cd3826amr199259066b.58.1716643693213; Sat, 25 May 2024 06:28:13 -0700 (PDT) Received: from hex.my.domain (83.8.128.191.ipv4.supernova.orange.pl. [83.8.128.191]) by smtp.gmail.com with ESMTPSA id a640c23a62f3a-a626cda46e1sm251842566b.196.2024.05.25.06.28.11 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Sat, 25 May 2024 06:28:12 -0700 (PDT) From: Artur Weber Date: Sat, 25 May 2024 15:28:09 +0200 Subject: [PATCH v4 5/9] ASoC: samsung: midas_wm1811: Add GPIO-based headset jack detection Precedence: bulk X-Mailing-List: linux-samsung-soc@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Message-Id: <20240525-midas-wm1811-gpio-jack-v4-5-f488e03bd8c7@gmail.com> References: <20240525-midas-wm1811-gpio-jack-v4-0-f488e03bd8c7@gmail.com> In-Reply-To: <20240525-midas-wm1811-gpio-jack-v4-0-f488e03bd8c7@gmail.com> To: Sylwester Nawrocki , Krzysztof Kozlowski Cc: Liam Girdwood , Mark Brown , Rob Herring , Conor Dooley , Jaroslav Kysela , Takashi Iwai , Alim Akhtar , alsa-devel@alsa-project.org, linux-sound@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-samsung-soc@vger.kernel.org, ~postmarketos/upstreaming@lists.sr.ht, Artur Weber X-Mailer: b4 0.13.0 X-Developer-Signature: v=1; a=ed25519-sha256; t=1716643685; l=11849; i=aweber.kernel@gmail.com; s=20231030; h=from:subject:message-id; bh=s6HoX2bIiyeFHVO8H4gwhbEs3zH4TzKxdBruCqDrxxM=; b=zR0eYWuT/ZjNmLwhSpdGpDL+Qf5ZIm9sfaJ+OWv+1VFmeFS6SxTlvW8SFabYIV3KHjdVH9jF+ pUJzZzuHu9oDpBEsXjSXMllbtpEGW7gnFGwPb3pD8yDxxTFScTCH0Sr X-Developer-Key: i=aweber.kernel@gmail.com; a=ed25519; pk=RhDBfWbJEHqDibXbhNEBAnc9FMkyznGxX/hwfhL8bv8= Some Samsung devices that use the midas_wm1811 driver use a GPIO-based method for detecting whether the headset jack is plugged in, as well as detecting which headset buttons are pressed. There are two GPIOs: a "headset detect" GPIO responsible for detecting jack insertion, and a "headset key" GPIO which triggers when a button on the headset is pressed. The plug type and the button pressed are determined based on information from an ADC channel. The headset mic is enabled by a headset mic bias regulator. Add support for the GPIO-based headset jack detection mechanism, and make it configurable from the device tree. This implementation borrows somewhat from the aries_wm8994.c driver, though there are a few changes to make the code cleaner, and to add support for DT-based configuration. Notably, a dependency on IIO is introduced, to accommodate the ADC reading requirement. Signed-off-by: Artur Weber --- Changes in v4: - Adapted to regulators being changed to use SND_SOC_DAPM_REGULATOR_SUPPLY Changes in v2: - Added separate headset mic bias regulator - Added samsung preset to threshold properties - Replaced dev_err+return with return dev_err_probe where needed --- sound/soc/samsung/Kconfig | 2 +- sound/soc/samsung/midas_wm1811.c | 272 +++++++++++++++++++++++++++++++++++++-- 2 files changed, 263 insertions(+), 11 deletions(-) diff --git a/sound/soc/samsung/Kconfig b/sound/soc/samsung/Kconfig index 93c2b1b08d0a..4b1ea7b2c796 100644 --- a/sound/soc/samsung/Kconfig +++ b/sound/soc/samsung/Kconfig @@ -140,7 +140,7 @@ config SND_SOC_SAMSUNG_ARIES_WM8994 config SND_SOC_SAMSUNG_MIDAS_WM1811 tristate "SoC I2S Audio support for Midas boards" - depends on SND_SOC_SAMSUNG + depends on SND_SOC_SAMSUNG && IIO select SND_SAMSUNG_I2S select SND_SOC_WM8994 help diff --git a/sound/soc/samsung/midas_wm1811.c b/sound/soc/samsung/midas_wm1811.c index 96cec8e9de98..88fa9e5bc093 100644 --- a/sound/soc/samsung/midas_wm1811.c +++ b/sound/soc/samsung/midas_wm1811.c @@ -7,7 +7,9 @@ #include #include +#include #include +#include #include #include #include @@ -28,6 +30,9 @@ struct midas_priv { struct gpio_desc *gpio_fm_sel; struct gpio_desc *gpio_lineout_sel; + struct gpio_desc *gpio_headset_detect; + struct gpio_desc *gpio_headset_key; + struct iio_channel *adc_headset_detect; unsigned int fll1_rate; struct snd_soc_jack headset_jack; @@ -44,6 +49,117 @@ static struct snd_soc_jack_pin headset_jack_pins[] = { }, }; +/* + * min_mv/max_mv values in this struct are set up based on DT values. + */ +static struct snd_soc_jack_zone headset_jack_zones[] = { + { .jack_type = SND_JACK_HEADPHONE, }, + { .jack_type = SND_JACK_HEADSET, }, + { .jack_type = SND_JACK_HEADPHONE, }, +}; + +/* + * This is used for manual detection in headset_key_check, we reuse the + * structure since it's convenient. + * + * min_mv/max_mv values in this struct are set up based on DT values. + */ +static struct snd_soc_jack_zone headset_key_zones[] = { + { .jack_type = SND_JACK_BTN_0, }, /* Media */ + { .jack_type = SND_JACK_BTN_1, }, /* Volume Up */ + { .jack_type = SND_JACK_BTN_2, }, /* Volume Down */ +}; + +static int headset_jack_check(void *data) +{ + struct snd_soc_component *codec = data; + struct snd_soc_dapm_context *dapm = snd_soc_component_get_dapm(codec); + struct midas_priv *priv = snd_soc_card_get_drvdata(codec->card); + int adc, ret; + int jack_type = 0; + + if (!gpiod_get_value_cansleep(priv->gpio_headset_detect)) + return 0; + + /* Enable headset mic bias regulator so that the ADC reading works */ + ret = snd_soc_dapm_force_enable_pin(dapm, "headset-mic-bias"); + if (ret < 0) { + pr_err("%s: Failed to enable headset mic bias regulator (%d), assuming headphones\n", + __func__, ret); + return SND_JACK_HEADPHONE; + } + snd_soc_dapm_sync(dapm); + + /* Sleep for a small amount of time to get the value to stabilize */ + msleep(20); + + ret = iio_read_channel_processed(priv->adc_headset_detect, &adc); + if (ret) { + pr_err("%s: Failed to read ADC (%d), assuming headphones\n", + __func__, ret); + jack_type = SND_JACK_HEADPHONE; + goto out; + } + pr_debug("%s: ADC value is %d\n", __func__, adc); + + jack_type = snd_soc_jack_get_type(&priv->headset_jack, adc); + +out: + ret = snd_soc_dapm_disable_pin(dapm, "headset-mic-bias"); + if (ret < 0) + pr_err("%s: Failed to disable headset mic bias regulator (%d)\n", + __func__, ret); + snd_soc_dapm_sync(dapm); + + return jack_type; +} + +static int headset_key_check(void *data) +{ + struct snd_soc_component *codec = data; + struct midas_priv *priv = snd_soc_card_get_drvdata(codec->card); + int adc, i, ret; + + if (!gpiod_get_value_cansleep(priv->gpio_headset_key)) + return 0; + + /* Filter out keypresses when 4 pole jack not detected */ + if (!(priv->headset_jack.status & SND_JACK_MICROPHONE)) + return 0; + + ret = iio_read_channel_processed(priv->adc_headset_detect, &adc); + if (ret) { + pr_err("%s: Failed to read ADC (%d), can't detect key type\n", + __func__, ret); + return 0; + } + pr_debug("%s: ADC value is %d\n", __func__, adc); + + for (i = 0; i < ARRAY_SIZE(headset_key_zones); i++) { + if (adc >= headset_key_zones[i].min_mv && + adc <= headset_key_zones[i].max_mv) { + return headset_key_zones[i].jack_type; + } + } + + return 0; +} + +static struct snd_soc_jack_gpio headset_gpio[] = { + { + .name = "Headset Jack", + .report = SND_JACK_HEADSET, + .debounce_time = 150, + .jack_status_check = headset_jack_check, + }, + { + .name = "Headset Key", + .report = SND_JACK_BTN_0 | SND_JACK_BTN_1 | SND_JACK_BTN_2, + .debounce_time = 30, + .jack_status_check = headset_key_check, + }, +}; + static int midas_start_fll1(struct snd_soc_pcm_runtime *rtd, unsigned int rate) { struct snd_soc_card *card = rtd->card; @@ -291,18 +407,67 @@ static int midas_late_probe(struct snd_soc_card *card) return ret; } - ret = snd_soc_card_jack_new_pins(card, "Headset", - SND_JACK_HEADSET | SND_JACK_MECHANICAL | - SND_JACK_BTN_0 | SND_JACK_BTN_1 | SND_JACK_BTN_2 | - SND_JACK_BTN_3 | SND_JACK_BTN_4 | SND_JACK_BTN_5, - &priv->headset_jack, - headset_jack_pins, - ARRAY_SIZE(headset_jack_pins)); - if (ret) + if (!priv->gpio_headset_detect) { + ret = snd_soc_card_jack_new_pins(card, "Headset", + SND_JACK_HEADSET | SND_JACK_MECHANICAL | + SND_JACK_BTN_0 | SND_JACK_BTN_1 | + SND_JACK_BTN_2 | SND_JACK_BTN_3 | + SND_JACK_BTN_4 | SND_JACK_BTN_5, + &priv->headset_jack, + headset_jack_pins, + ARRAY_SIZE(headset_jack_pins)); + if (ret) + return ret; + + wm8958_mic_detect(aif1_dai->component, &priv->headset_jack, + NULL, NULL, NULL, NULL); + } else { + /* Some devices (n8000, t310) use a GPIO to detect the jack. */ + ret = snd_soc_card_jack_new_pins(card, "Headset", + SND_JACK_HEADSET | SND_JACK_BTN_0 | + SND_JACK_BTN_1 | SND_JACK_BTN_2, + &priv->headset_jack, + headset_jack_pins, + ARRAY_SIZE(headset_jack_pins)); + if (ret) { + dev_err(card->dev, + "Failed to set up headset pins: %d\n", ret); + return ret; + } + + ret = snd_soc_jack_add_zones(&priv->headset_jack, + ARRAY_SIZE(headset_jack_zones), + headset_jack_zones); + if (ret) { + dev_err(card->dev, + "Failed to set up headset zones: %d\n", ret); + return ret; + } + + headset_gpio[0].data = aif1_dai->component; + headset_gpio[0].desc = priv->gpio_headset_detect; + + headset_gpio[1].data = aif1_dai->component; + headset_gpio[1].desc = priv->gpio_headset_key; + + snd_jack_set_key(priv->headset_jack.jack, + SND_JACK_BTN_0, KEY_MEDIA); + snd_jack_set_key(priv->headset_jack.jack, + SND_JACK_BTN_1, KEY_VOLUMEUP); + snd_jack_set_key(priv->headset_jack.jack, + SND_JACK_BTN_2, KEY_VOLUMEDOWN); + + ret = snd_soc_jack_add_gpios(&priv->headset_jack, + ARRAY_SIZE(headset_gpio), + headset_gpio); + if (ret) + dev_err(card->dev, + "Failed to set up headset jack GPIOs: %d\n", + ret); + return ret; + } - wm8958_mic_detect(aif1_dai->component, &priv->headset_jack, - NULL, NULL, NULL, NULL); return 0; } @@ -411,6 +576,9 @@ static int midas_probe(struct platform_device *pdev) struct snd_soc_card *card = &midas_card; struct device *dev = &pdev->dev; static struct snd_soc_dai_link *dai_link; + enum iio_chan_type channel_type; + u32 fourpole_threshold[2]; + u32 button_threshold[3]; struct midas_priv *priv; int ret, i; @@ -434,6 +602,90 @@ static int midas_probe(struct platform_device *pdev) return PTR_ERR(priv->gpio_lineout_sel); } + priv->gpio_headset_detect = devm_gpiod_get_optional(dev, + "headset-detect", GPIOD_IN); + if (IS_ERR(priv->gpio_headset_detect)) + return dev_err_probe(dev, PTR_ERR(priv->gpio_headset_detect), + "Failed to get headset jack detect GPIO\n"); + + if (priv->gpio_headset_detect) { + priv->adc_headset_detect = devm_iio_channel_get(dev, + "headset-detect"); + if (IS_ERR(priv->adc_headset_detect)) + return dev_err_probe(dev, + PTR_ERR(priv->adc_headset_detect), + "Failed to get ADC channel\n"); + + ret = iio_get_channel_type(priv->adc_headset_detect, + &channel_type); + if (ret) { + dev_err(dev, "Failed to get ADC channel type\n"); + return ret; + } + + if (channel_type != IIO_VOLTAGE) { + dev_err(dev, "ADC channel is not voltage\n"); + return ret; + } + + priv->gpio_headset_key = devm_gpiod_get(dev, "headset-key", + GPIOD_IN); + if (IS_ERR(priv->gpio_headset_key)) + return dev_err_probe(dev, + PTR_ERR(priv->gpio_headset_key), + "Failed to get headset key GPIO\n"); + + ret = of_property_read_u32_array(dev->of_node, + "samsung,headset-4pole-threshold-microvolt", + fourpole_threshold, + ARRAY_SIZE(fourpole_threshold)); + if (ret) { + dev_err(dev, "Failed to get 4-pole jack detection threshold\n"); + return ret; + } + + if (fourpole_threshold[0] > fourpole_threshold[1]) { + dev_err(dev, "Invalid 4-pole jack detection threshold value\n"); + return -EINVAL; + } + + headset_jack_zones[0].max_mv = (fourpole_threshold[0]); + headset_jack_zones[1].min_mv = (fourpole_threshold[0] + 1); + + headset_jack_zones[1].max_mv = (fourpole_threshold[1]); + headset_jack_zones[2].min_mv = (fourpole_threshold[1] + 1); + + ret = of_property_read_u32_array(dev->of_node, + "samsung,headset-button-threshold-microvolt", + button_threshold, + ARRAY_SIZE(button_threshold)); + if (ret) { + dev_err(dev, "Failed to get headset button detection threshold\n"); + return ret; + } + + if (button_threshold[0] > button_threshold[1] || + button_threshold[1] > button_threshold[2]) { + dev_err(dev, "Invalid headset button detection threshold value\n"); + return -EINVAL; + } + + for (i = 0; i < 3; i++) { + if (i != 0 && button_threshold[i] <= 0) { + dev_err(dev, "Invalid headset button detection threshold value\n"); + return -EINVAL; + } + + headset_key_zones[i].min_mv = button_threshold[i]; + + if (i == 2) + headset_key_zones[i].max_mv = UINT_MAX; + else + headset_key_zones[i].max_mv = \ + (button_threshold[i+1] - 1); + } + } + ret = snd_soc_of_parse_card_name(card, "model"); if (ret < 0) { dev_err(dev, "Card name is not specified\n");