Message ID | 20240715-max77693-charger-extcon-v2-5-0838ffbb18c3@gmail.com (mailing list archive) |
---|---|
State | New |
Headers | show |
Series | power: supply: max77693: Toggle charging/OTG based on extcon status | expand |
On Mon, 15 Jul 2024, Artur Weber wrote: > There are two charger current limit registers: > > - Fast charge current limit (which controls current going from the > charger to the battery); > - CHGIN input current limit (which controls current going into the > charger through the cable). > > Add a function for setting both of the values, and set them to a > safe default value of 500mA at initialization. > > The default value for the fast charge current limit can be modified > by setting the constant-charge-current-max-ua DT property of the > battery node specified in the monitored-battery charger DT property. > > Signed-off-by: Artur Weber <aweber.kernel@gmail.com> > --- > Changes in v2: > - Squashed mfd include register additions into this commit > - Changed from custom fast charge current property to monitored-battery > (devm_power_supply_register call has been moved up as it is needed by > the DT init function now) > - Changed to adapt to both current limit values being managed by the > CHARGER regulator > --- > drivers/power/supply/max77693_charger.c | 43 ++++++++++++++++++++++++--------- > include/linux/mfd/max77693-private.h | 6 +++++ Acked-by: Lee Jones <lee@kernel.org> > 2 files changed, 38 insertions(+), 11 deletions(-) > > diff --git a/drivers/power/supply/max77693_charger.c b/drivers/power/supply/max77693_charger.c > index 0d53f61d58ba..0ddaa03669a2 100644 > --- a/drivers/power/supply/max77693_charger.c > +++ b/drivers/power/supply/max77693_charger.c > @@ -28,6 +28,7 @@ struct max77693_charger { > u32 min_system_volt; > u32 thermal_regulation_temp; > u32 batttery_overcurrent; > + u32 fast_charge_current; > u32 charge_input_threshold_volt; > }; > > @@ -570,6 +571,14 @@ static int max77693_set_batttery_overcurrent(struct max77693_charger *chg, > CHG_CNFG_12_B2SOVRC_MASK, data); > } > > +static int max77693_set_current_limit(struct max77693_charger *chg, > + unsigned int uamp) > +{ > + dev_dbg(chg->dev, "Current limit: %u\n", uamp); > + > + return regulator_set_current_limit(chg->regu, (int)uamp, (int)uamp); > +} > + > static int max77693_set_charge_input_threshold_volt(struct max77693_charger *chg, > unsigned int uvolt) > { > @@ -647,6 +656,10 @@ static int max77693_reg_init(struct max77693_charger *chg) > if (ret) > return ret; > > + ret = max77693_set_current_limit(chg, DEFAULT_FAST_CHARGE_CURRENT); > + if (ret) > + return ret; > + > return max77693_set_charge_input_threshold_volt(chg, > chg->charge_input_threshold_volt); > } > @@ -654,6 +667,7 @@ static int max77693_reg_init(struct max77693_charger *chg) > #ifdef CONFIG_OF > static int max77693_dt_init(struct device *dev, struct max77693_charger *chg) > { > + struct power_supply_battery_info *battery_info; > struct device_node *np = dev->of_node; > > if (!np) { > @@ -682,11 +696,20 @@ static int max77693_dt_init(struct device *dev, struct max77693_charger *chg) > chg->charge_input_threshold_volt = > DEFAULT_CHARGER_INPUT_THRESHOLD_VOLT; > > + if (power_supply_get_battery_info(chg->charger, &battery_info) || > + !battery_info->constant_charge_current_max_ua) > + chg->fast_charge_current = DEFAULT_FAST_CHARGE_CURRENT; > + else > + chg->fast_charge_current = \ > + battery_info->constant_charge_current_max_ua; > + > return 0; > } > #else /* CONFIG_OF */ > static int max77693_dt_init(struct device *dev, struct max77693_charger *chg) > { > + chg->fast_charge_current = DEFAULT_FAST_CHARGE_CURRENT; > + > return 0; > } > #endif /* CONFIG_OF */ > @@ -712,6 +735,15 @@ static int max77693_charger_probe(struct platform_device *pdev) > return dev_err_probe(&pdev->dev, PTR_ERR(chg->regu), > "failed to get charger regulator\n"); > > + psy_cfg.drv_data = chg; > + > + chg->charger = devm_power_supply_register(&pdev->dev, > + &max77693_charger_desc, > + &psy_cfg); > + if (IS_ERR(chg->charger)) > + return dev_err_probe(&pdev->dev, PTR_ERR(chg->charger), > + "failed: power supply register\n"); > + > ret = max77693_dt_init(&pdev->dev, chg); > if (ret) > return ret; > @@ -720,8 +752,6 @@ static int max77693_charger_probe(struct platform_device *pdev) > if (ret) > return ret; > > - psy_cfg.drv_data = chg; > - > ret = device_create_file(&pdev->dev, &dev_attr_fast_charge_timer); > if (ret) { > dev_err(&pdev->dev, "failed: create fast charge timer sysfs entry\n"); > @@ -741,15 +771,6 @@ static int max77693_charger_probe(struct platform_device *pdev) > goto err; > } > > - chg->charger = devm_power_supply_register(&pdev->dev, > - &max77693_charger_desc, > - &psy_cfg); > - if (IS_ERR(chg->charger)) { > - dev_err(&pdev->dev, "failed: power supply register\n"); > - ret = PTR_ERR(chg->charger); > - goto err; > - } > - > return 0; > > err: > diff --git a/include/linux/mfd/max77693-private.h b/include/linux/mfd/max77693-private.h > index 54444ff2a5de..4570646e2f33 100644 > --- a/include/linux/mfd/max77693-private.h > +++ b/include/linux/mfd/max77693-private.h > @@ -145,6 +145,8 @@ enum max77693_pmic_reg { > #define DEFAULT_THERMAL_REGULATION_TEMP 100 > /* microamps */ > #define DEFAULT_BATTERY_OVERCURRENT 3500000 > +/* microamps */ > +#define DEFAULT_FAST_CHARGE_CURRENT 500000 > /* microvolts */ > #define DEFAULT_CHARGER_INPUT_THRESHOLD_VOLT 4300000 > > @@ -217,6 +219,10 @@ enum max77693_charger_battery_state { > #define CHG_CNFG_01_CHGRSTRT_MASK (0x3 << CHG_CNFG_01_CHGRSTRT_SHIFT) > #define CHG_CNFG_01_PQEN_MAKS BIT(CHG_CNFG_01_PQEN_SHIFT) > > +/* MAX77693_CHG_REG_CHG_CNFG_02 register */ > +#define CHG_CNFG_02_CC_SHIFT 0 > +#define CHG_CNFG_02_CC_MASK 0x3F > + > /* MAX77693_CHG_REG_CHG_CNFG_03 register */ > #define CHG_CNFG_03_TOITH_SHIFT 0 > #define CHG_CNFG_03_TOTIME_SHIFT 3 > > -- > 2.45.2 >
diff --git a/drivers/power/supply/max77693_charger.c b/drivers/power/supply/max77693_charger.c index 0d53f61d58ba..0ddaa03669a2 100644 --- a/drivers/power/supply/max77693_charger.c +++ b/drivers/power/supply/max77693_charger.c @@ -28,6 +28,7 @@ struct max77693_charger { u32 min_system_volt; u32 thermal_regulation_temp; u32 batttery_overcurrent; + u32 fast_charge_current; u32 charge_input_threshold_volt; }; @@ -570,6 +571,14 @@ static int max77693_set_batttery_overcurrent(struct max77693_charger *chg, CHG_CNFG_12_B2SOVRC_MASK, data); } +static int max77693_set_current_limit(struct max77693_charger *chg, + unsigned int uamp) +{ + dev_dbg(chg->dev, "Current limit: %u\n", uamp); + + return regulator_set_current_limit(chg->regu, (int)uamp, (int)uamp); +} + static int max77693_set_charge_input_threshold_volt(struct max77693_charger *chg, unsigned int uvolt) { @@ -647,6 +656,10 @@ static int max77693_reg_init(struct max77693_charger *chg) if (ret) return ret; + ret = max77693_set_current_limit(chg, DEFAULT_FAST_CHARGE_CURRENT); + if (ret) + return ret; + return max77693_set_charge_input_threshold_volt(chg, chg->charge_input_threshold_volt); } @@ -654,6 +667,7 @@ static int max77693_reg_init(struct max77693_charger *chg) #ifdef CONFIG_OF static int max77693_dt_init(struct device *dev, struct max77693_charger *chg) { + struct power_supply_battery_info *battery_info; struct device_node *np = dev->of_node; if (!np) { @@ -682,11 +696,20 @@ static int max77693_dt_init(struct device *dev, struct max77693_charger *chg) chg->charge_input_threshold_volt = DEFAULT_CHARGER_INPUT_THRESHOLD_VOLT; + if (power_supply_get_battery_info(chg->charger, &battery_info) || + !battery_info->constant_charge_current_max_ua) + chg->fast_charge_current = DEFAULT_FAST_CHARGE_CURRENT; + else + chg->fast_charge_current = \ + battery_info->constant_charge_current_max_ua; + return 0; } #else /* CONFIG_OF */ static int max77693_dt_init(struct device *dev, struct max77693_charger *chg) { + chg->fast_charge_current = DEFAULT_FAST_CHARGE_CURRENT; + return 0; } #endif /* CONFIG_OF */ @@ -712,6 +735,15 @@ static int max77693_charger_probe(struct platform_device *pdev) return dev_err_probe(&pdev->dev, PTR_ERR(chg->regu), "failed to get charger regulator\n"); + psy_cfg.drv_data = chg; + + chg->charger = devm_power_supply_register(&pdev->dev, + &max77693_charger_desc, + &psy_cfg); + if (IS_ERR(chg->charger)) + return dev_err_probe(&pdev->dev, PTR_ERR(chg->charger), + "failed: power supply register\n"); + ret = max77693_dt_init(&pdev->dev, chg); if (ret) return ret; @@ -720,8 +752,6 @@ static int max77693_charger_probe(struct platform_device *pdev) if (ret) return ret; - psy_cfg.drv_data = chg; - ret = device_create_file(&pdev->dev, &dev_attr_fast_charge_timer); if (ret) { dev_err(&pdev->dev, "failed: create fast charge timer sysfs entry\n"); @@ -741,15 +771,6 @@ static int max77693_charger_probe(struct platform_device *pdev) goto err; } - chg->charger = devm_power_supply_register(&pdev->dev, - &max77693_charger_desc, - &psy_cfg); - if (IS_ERR(chg->charger)) { - dev_err(&pdev->dev, "failed: power supply register\n"); - ret = PTR_ERR(chg->charger); - goto err; - } - return 0; err: diff --git a/include/linux/mfd/max77693-private.h b/include/linux/mfd/max77693-private.h index 54444ff2a5de..4570646e2f33 100644 --- a/include/linux/mfd/max77693-private.h +++ b/include/linux/mfd/max77693-private.h @@ -145,6 +145,8 @@ enum max77693_pmic_reg { #define DEFAULT_THERMAL_REGULATION_TEMP 100 /* microamps */ #define DEFAULT_BATTERY_OVERCURRENT 3500000 +/* microamps */ +#define DEFAULT_FAST_CHARGE_CURRENT 500000 /* microvolts */ #define DEFAULT_CHARGER_INPUT_THRESHOLD_VOLT 4300000 @@ -217,6 +219,10 @@ enum max77693_charger_battery_state { #define CHG_CNFG_01_CHGRSTRT_MASK (0x3 << CHG_CNFG_01_CHGRSTRT_SHIFT) #define CHG_CNFG_01_PQEN_MAKS BIT(CHG_CNFG_01_PQEN_SHIFT) +/* MAX77693_CHG_REG_CHG_CNFG_02 register */ +#define CHG_CNFG_02_CC_SHIFT 0 +#define CHG_CNFG_02_CC_MASK 0x3F + /* MAX77693_CHG_REG_CHG_CNFG_03 register */ #define CHG_CNFG_03_TOITH_SHIFT 0 #define CHG_CNFG_03_TOTIME_SHIFT 3
There are two charger current limit registers: - Fast charge current limit (which controls current going from the charger to the battery); - CHGIN input current limit (which controls current going into the charger through the cable). Add a function for setting both of the values, and set them to a safe default value of 500mA at initialization. The default value for the fast charge current limit can be modified by setting the constant-charge-current-max-ua DT property of the battery node specified in the monitored-battery charger DT property. Signed-off-by: Artur Weber <aweber.kernel@gmail.com> --- Changes in v2: - Squashed mfd include register additions into this commit - Changed from custom fast charge current property to monitored-battery (devm_power_supply_register call has been moved up as it is needed by the DT init function now) - Changed to adapt to both current limit values being managed by the CHARGER regulator --- drivers/power/supply/max77693_charger.c | 43 ++++++++++++++++++++++++--------- include/linux/mfd/max77693-private.h | 6 +++++ 2 files changed, 38 insertions(+), 11 deletions(-)