Message ID | 20240730091648.72322-3-swathi.ks@samsung.com (mailing list archive) |
---|---|
State | New |
Headers | show |
Series | [v4,1/4] dt-bindings: net: Add FSD EQoS device tree bindings | expand |
> +static int dwc_eqos_rxmux_setup(void *priv, bool external) > +{ > + int i = 0; > + struct fsd_eqos_plat_data *plat = priv; > + struct clk *rx1 = NULL; > + struct clk *rx2 = NULL; > + struct clk *rx3 = NULL; Reverse Christmas tree please. > @@ -264,6 +264,7 @@ struct plat_stmmacenet_data { > void (*ptp_clk_freq_config)(struct stmmac_priv *priv); > int (*init)(struct platform_device *pdev, void *priv); > void (*exit)(struct platform_device *pdev, void *priv); > + int (*rxmux_setup)(void *priv, bool external); > struct mac_device_info *(*setup)(void *priv); > int (*clks_config)(void *priv, bool enabled); > int (*crosststamp)(ktime_t *device, struct system_counterval_t *system, It would be good if one of the stmmas Maintainers looked at this. There are already a lot of function pointers here, we should not be added another one if one of the exiting ones could be used. Andrew --- pw-bot: cr
> -----Original Message----- > From: Andrew Lunn <andrew@lunn.ch> > Sent: 31 July 2024 01:44 > To: Swathi K S <swathi.ks@samsung.com> > Cc: krzk@kernel.org; robh@kernel.org; davem@davemloft.net; > edumazet@google.com; kuba@kernel.org; pabeni@redhat.com; > conor+dt@kernel.org; richardcochran@gmail.com; > mcoquelin.stm32@gmail.com; alim.akhtar@samsung.com; linux- > fsd@tesla.com; netdev@vger.kernel.org; devicetree@vger.kernel.org; linux- > kernel@vger.kernel.org; linux-stm32@st-md-mailman.stormreply.com; linux- > arm-kernel@lists.infradead.org; linux-samsung-soc@vger.kernel.org; > alexandre.torgue@foss.st.com; peppe.cavallaro@st.com; > joabreu@synopsys.com; rcsekar@samsung.com; ssiddha@tesla.com; > jayati.sahu@samsung.com; pankaj.dubey@samsung.com; > ravi.patel@samsung.com; gost.dev@samsung.com > Subject: Re: [PATCH v4 2/4] net: stmmac: dwc-qos: Add FSD EQoS support > > > +static int dwc_eqos_rxmux_setup(void *priv, bool external) { > > + int i = 0; > > + struct fsd_eqos_plat_data *plat = priv; > > + struct clk *rx1 = NULL; > > + struct clk *rx2 = NULL; > > + struct clk *rx3 = NULL; > > Reverse Christmas tree please. Thanks for review. We will take care in next patch version after waiting for other review comments. > > > @@ -264,6 +264,7 @@ struct plat_stmmacenet_data { > > void (*ptp_clk_freq_config)(struct stmmac_priv *priv); > > int (*init)(struct platform_device *pdev, void *priv); > > void (*exit)(struct platform_device *pdev, void *priv); > > + int (*rxmux_setup)(void *priv, bool external); > > struct mac_device_info *(*setup)(void *priv); > > int (*clks_config)(void *priv, bool enabled); > > int (*crosststamp)(ktime_t *device, struct system_counterval_t > > *system, > > It would be good if one of the stmmas Maintainers looked at this. There are > already a lot of function pointers here, we should not be added another one if > one of the exiting ones could be used. > > Andrew > > --- > pw-bot: cr
Hi Swathi, Andrew On Tue, Jul 30, 2024 at 02:46:46PM +0530, Swathi K S wrote: > The FSD SoC contains two instance of the Synopsys DWC ethernet QOS IP core. > The binding that it uses is slightly different from existing ones because > of the integration (clocks, resets). > > For FSD SoC, a mux switch is needed between internal and external clocks. > By default after reset internal clock is used but for receiving packets > properly, external clock is needed. Mux switch to external clock happens > only when the external clock is present. > > Signed-off-by: Chandrasekar R <rcsekar@samsung.com> > Signed-off-by: Suresh Siddha <ssiddha@tesla.com> > Signed-off-by: Swathi K S <swathi.ks@samsung.com> > --- > .../stmicro/stmmac/dwmac-dwc-qos-eth.c | 90 +++++++++++++++++++ > .../net/ethernet/stmicro/stmmac/stmmac_main.c | 28 +++++- > include/linux/stmmac.h | 1 + > 3 files changed, 117 insertions(+), 2 deletions(-) > > diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-dwc-qos-eth.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-dwc-qos-eth.c > index ec924c6c76c6..bc97b3b573b7 100644 > --- a/drivers/net/ethernet/stmicro/stmmac/dwmac-dwc-qos-eth.c > +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-dwc-qos-eth.c > @@ -20,6 +20,7 @@ > #include <linux/platform_device.h> > #include <linux/reset.h> > #include <linux/stmmac.h> > +#include <linux/regmap.h> > > #include "stmmac_platform.h" > #include "dwmac4.h" > @@ -37,6 +38,13 @@ struct tegra_eqos { > struct gpio_desc *reset; > }; > > +struct fsd_eqos_plat_data { > + const struct fsd_eqos_variant *fsd_eqos_inst_var; > + struct clk_bulk_data *clks; > + int num_clks; > + struct device *dev; > +}; > + > static int dwc_eth_dwmac_config_dt(struct platform_device *pdev, > struct plat_stmmacenet_data *plat_dat) > { > @@ -265,6 +273,82 @@ static int tegra_eqos_init(struct platform_device *pdev, void *priv) > return 0; > } > > +static int dwc_eqos_rxmux_setup(void *priv, bool external) > +{ > + int i = 0; > + struct fsd_eqos_plat_data *plat = priv; > + struct clk *rx1 = NULL; > + struct clk *rx2 = NULL; > + struct clk *rx3 = NULL; > + > + for (i = 0; i < plat->num_clks; i++) { > + if (strcmp(plat->clks[i].id, "eqos_rxclk_mux") == 0) > + rx1 = plat->clks[i].clk; > + else if (strcmp(plat->clks[i].id, "eqos_phyrxclk") == 0) > + rx2 = plat->clks[i].clk; > + else if (strcmp(plat->clks[i].id, "dout_peric_rgmii_clk") == 0) > + rx3 = plat->clks[i].clk; > + } > + > + /* doesn't support RX clock mux */ > + if (!rx1) > + return 0; > + > + if (external) > + return clk_set_parent(rx1, rx2); > + else > + return clk_set_parent(rx1, rx3); > +} Andrew is right asking about this implementation. It does seem questionable: 1. AFAIR RGMII Rx clock is supposed to be retrieved the PHY. So the eqos_phyrxclk and dout_peric_rgmii_clk are the PHY clocks. Do you have a PHY integrated in the SoC? If so you should have defined it as a separate DT-node and moved the clocks definition in there. 2. Do you really need to perform the "eqos_rxclk_mux" clock re-parenting on each interface open/close? Based on the commit log you don't. So the re-parenting can be done in the glue driver or even in the device tree by means of the "assigned-clock-parents" property. -Serge(y) > + > +static int fsd_clks_endisable(void *priv, bool enabled) > +{ > + struct fsd_eqos_plat_data *plat = priv; > + > + if (enabled) { > + return clk_bulk_prepare_enable(plat->num_clks, plat->clks); > + } else { > + clk_bulk_disable_unprepare(plat->num_clks, plat->clks); > + return 0; > + } > +} > + > +static int fsd_eqos_probe(struct platform_device *pdev, > + struct plat_stmmacenet_data *data, > + struct stmmac_resources *res) > +{ > + struct fsd_eqos_plat_data *priv_plat; > + int ret = 0; > + > + priv_plat = devm_kzalloc(&pdev->dev, sizeof(*priv_plat), GFP_KERNEL); > + if (!priv_plat) > + return -ENOMEM; > + > + priv_plat->dev = &pdev->dev; > + > + ret = devm_clk_bulk_get_all(&pdev->dev, &priv_plat->clks); > + if (ret < 0) > + return dev_err_probe(&pdev->dev, ret, "No clocks available\n"); > + > + priv_plat->num_clks = ret; > + > + data->bsp_priv = priv_plat; > + data->clks_config = fsd_clks_endisable; > + data->rxmux_setup = dwc_eqos_rxmux_setup; > + > + ret = fsd_clks_endisable(priv_plat, true); > + if (ret) > + return dev_err_probe(&pdev->dev, ret, "Unable to enable fsd clock\n"); > + > + return 0; > +} > + > +static void fsd_eqos_remove(struct platform_device *pdev) > +{ > + struct fsd_eqos_plat_data *priv_plat = get_stmmac_bsp_priv(&pdev->dev); > + > + fsd_clks_endisable(priv_plat, false); > +} > + > static int tegra_eqos_probe(struct platform_device *pdev, > struct plat_stmmacenet_data *data, > struct stmmac_resources *res) > @@ -411,6 +495,11 @@ static const struct dwc_eth_dwmac_data tegra_eqos_data = { > .remove = tegra_eqos_remove, > }; > > +static const struct dwc_eth_dwmac_data fsd_eqos_data = { > + .probe = fsd_eqos_probe, > + .remove = fsd_eqos_remove, > +}; > + > static int dwc_eth_dwmac_probe(struct platform_device *pdev) > { > const struct dwc_eth_dwmac_data *data; > @@ -473,6 +562,7 @@ static void dwc_eth_dwmac_remove(struct platform_device *pdev) > static const struct of_device_id dwc_eth_dwmac_match[] = { > { .compatible = "snps,dwc-qos-ethernet-4.10", .data = &dwc_qos_data }, > { .compatible = "nvidia,tegra186-eqos", .data = &tegra_eqos_data }, > + { .compatible = "tesla,fsd-ethqos", .data = &fsd_eqos_data }, > { } > }; > MODULE_DEVICE_TABLE(of, dwc_eth_dwmac_match); > diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c > index 12689774d755..2ef82edec522 100644 > --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c > +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c > @@ -4001,6 +4001,12 @@ static int __stmmac_open(struct net_device *dev, > netif_tx_start_all_queues(priv->dev); > stmmac_enable_all_dma_irq(priv); > > + if (priv->plat->rxmux_setup) { > + ret = priv->plat->rxmux_setup(priv->plat->bsp_priv, true); > + if (ret) > + netdev_err(priv->dev, "Rxmux setup failed\n"); > + } > + > return 0; > > irq_error: > @@ -4056,7 +4062,13 @@ static void stmmac_fpe_stop_wq(struct stmmac_priv *priv) > static int stmmac_release(struct net_device *dev) > { > struct stmmac_priv *priv = netdev_priv(dev); > - u32 chan; > + u32 chan, ret; > + > + if (priv->plat->rxmux_setup) { > + ret = priv->plat->rxmux_setup(priv->plat->bsp_priv, false); > + if (ret) > + netdev_err(priv->dev, "Rxmux setup failed\n"); > + } > > if (device_may_wakeup(priv->device)) > phylink_speed_down(priv->phylink, false); > @@ -7848,11 +7860,17 @@ int stmmac_suspend(struct device *dev) > { > struct net_device *ndev = dev_get_drvdata(dev); > struct stmmac_priv *priv = netdev_priv(ndev); > - u32 chan; > + u32 chan, ret; > > if (!ndev || !netif_running(ndev)) > return 0; > > + if (priv->plat->rxmux_setup) { > + ret = priv->plat->rxmux_setup(priv->plat->bsp_priv, false); > + if (ret) > + netdev_err(priv->dev, "Rxmux setup failed\n"); > + } > + > mutex_lock(&priv->lock); > > netif_device_detach(ndev); > @@ -8018,6 +8036,12 @@ int stmmac_resume(struct device *dev) > mutex_unlock(&priv->lock); > rtnl_unlock(); > > + if (priv->plat->rxmux_setup) { > + ret = priv->plat->rxmux_setup(priv->plat->bsp_priv, true); > + if (ret) > + netdev_err(priv->dev, "Rxmux setup failed\n"); > + } > + > netif_device_attach(ndev); > > return 0; > diff --git a/include/linux/stmmac.h b/include/linux/stmmac.h > index 84e13bd5df28..f017b818d421 100644 > --- a/include/linux/stmmac.h > +++ b/include/linux/stmmac.h > @@ -264,6 +264,7 @@ struct plat_stmmacenet_data { > void (*ptp_clk_freq_config)(struct stmmac_priv *priv); > int (*init)(struct platform_device *pdev, void *priv); > void (*exit)(struct platform_device *pdev, void *priv); > + int (*rxmux_setup)(void *priv, bool external); > struct mac_device_info *(*setup)(void *priv); > int (*clks_config)(void *priv, bool enabled); > int (*crosststamp)(ktime_t *device, struct system_counterval_t *system, > -- > 2.17.1 > >
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-dwc-qos-eth.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-dwc-qos-eth.c index ec924c6c76c6..bc97b3b573b7 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac-dwc-qos-eth.c +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-dwc-qos-eth.c @@ -20,6 +20,7 @@ #include <linux/platform_device.h> #include <linux/reset.h> #include <linux/stmmac.h> +#include <linux/regmap.h> #include "stmmac_platform.h" #include "dwmac4.h" @@ -37,6 +38,13 @@ struct tegra_eqos { struct gpio_desc *reset; }; +struct fsd_eqos_plat_data { + const struct fsd_eqos_variant *fsd_eqos_inst_var; + struct clk_bulk_data *clks; + int num_clks; + struct device *dev; +}; + static int dwc_eth_dwmac_config_dt(struct platform_device *pdev, struct plat_stmmacenet_data *plat_dat) { @@ -265,6 +273,82 @@ static int tegra_eqos_init(struct platform_device *pdev, void *priv) return 0; } +static int dwc_eqos_rxmux_setup(void *priv, bool external) +{ + int i = 0; + struct fsd_eqos_plat_data *plat = priv; + struct clk *rx1 = NULL; + struct clk *rx2 = NULL; + struct clk *rx3 = NULL; + + for (i = 0; i < plat->num_clks; i++) { + if (strcmp(plat->clks[i].id, "eqos_rxclk_mux") == 0) + rx1 = plat->clks[i].clk; + else if (strcmp(plat->clks[i].id, "eqos_phyrxclk") == 0) + rx2 = plat->clks[i].clk; + else if (strcmp(plat->clks[i].id, "dout_peric_rgmii_clk") == 0) + rx3 = plat->clks[i].clk; + } + + /* doesn't support RX clock mux */ + if (!rx1) + return 0; + + if (external) + return clk_set_parent(rx1, rx2); + else + return clk_set_parent(rx1, rx3); +} + +static int fsd_clks_endisable(void *priv, bool enabled) +{ + struct fsd_eqos_plat_data *plat = priv; + + if (enabled) { + return clk_bulk_prepare_enable(plat->num_clks, plat->clks); + } else { + clk_bulk_disable_unprepare(plat->num_clks, plat->clks); + return 0; + } +} + +static int fsd_eqos_probe(struct platform_device *pdev, + struct plat_stmmacenet_data *data, + struct stmmac_resources *res) +{ + struct fsd_eqos_plat_data *priv_plat; + int ret = 0; + + priv_plat = devm_kzalloc(&pdev->dev, sizeof(*priv_plat), GFP_KERNEL); + if (!priv_plat) + return -ENOMEM; + + priv_plat->dev = &pdev->dev; + + ret = devm_clk_bulk_get_all(&pdev->dev, &priv_plat->clks); + if (ret < 0) + return dev_err_probe(&pdev->dev, ret, "No clocks available\n"); + + priv_plat->num_clks = ret; + + data->bsp_priv = priv_plat; + data->clks_config = fsd_clks_endisable; + data->rxmux_setup = dwc_eqos_rxmux_setup; + + ret = fsd_clks_endisable(priv_plat, true); + if (ret) + return dev_err_probe(&pdev->dev, ret, "Unable to enable fsd clock\n"); + + return 0; +} + +static void fsd_eqos_remove(struct platform_device *pdev) +{ + struct fsd_eqos_plat_data *priv_plat = get_stmmac_bsp_priv(&pdev->dev); + + fsd_clks_endisable(priv_plat, false); +} + static int tegra_eqos_probe(struct platform_device *pdev, struct plat_stmmacenet_data *data, struct stmmac_resources *res) @@ -411,6 +495,11 @@ static const struct dwc_eth_dwmac_data tegra_eqos_data = { .remove = tegra_eqos_remove, }; +static const struct dwc_eth_dwmac_data fsd_eqos_data = { + .probe = fsd_eqos_probe, + .remove = fsd_eqos_remove, +}; + static int dwc_eth_dwmac_probe(struct platform_device *pdev) { const struct dwc_eth_dwmac_data *data; @@ -473,6 +562,7 @@ static void dwc_eth_dwmac_remove(struct platform_device *pdev) static const struct of_device_id dwc_eth_dwmac_match[] = { { .compatible = "snps,dwc-qos-ethernet-4.10", .data = &dwc_qos_data }, { .compatible = "nvidia,tegra186-eqos", .data = &tegra_eqos_data }, + { .compatible = "tesla,fsd-ethqos", .data = &fsd_eqos_data }, { } }; MODULE_DEVICE_TABLE(of, dwc_eth_dwmac_match); diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c index 12689774d755..2ef82edec522 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c @@ -4001,6 +4001,12 @@ static int __stmmac_open(struct net_device *dev, netif_tx_start_all_queues(priv->dev); stmmac_enable_all_dma_irq(priv); + if (priv->plat->rxmux_setup) { + ret = priv->plat->rxmux_setup(priv->plat->bsp_priv, true); + if (ret) + netdev_err(priv->dev, "Rxmux setup failed\n"); + } + return 0; irq_error: @@ -4056,7 +4062,13 @@ static void stmmac_fpe_stop_wq(struct stmmac_priv *priv) static int stmmac_release(struct net_device *dev) { struct stmmac_priv *priv = netdev_priv(dev); - u32 chan; + u32 chan, ret; + + if (priv->plat->rxmux_setup) { + ret = priv->plat->rxmux_setup(priv->plat->bsp_priv, false); + if (ret) + netdev_err(priv->dev, "Rxmux setup failed\n"); + } if (device_may_wakeup(priv->device)) phylink_speed_down(priv->phylink, false); @@ -7848,11 +7860,17 @@ int stmmac_suspend(struct device *dev) { struct net_device *ndev = dev_get_drvdata(dev); struct stmmac_priv *priv = netdev_priv(ndev); - u32 chan; + u32 chan, ret; if (!ndev || !netif_running(ndev)) return 0; + if (priv->plat->rxmux_setup) { + ret = priv->plat->rxmux_setup(priv->plat->bsp_priv, false); + if (ret) + netdev_err(priv->dev, "Rxmux setup failed\n"); + } + mutex_lock(&priv->lock); netif_device_detach(ndev); @@ -8018,6 +8036,12 @@ int stmmac_resume(struct device *dev) mutex_unlock(&priv->lock); rtnl_unlock(); + if (priv->plat->rxmux_setup) { + ret = priv->plat->rxmux_setup(priv->plat->bsp_priv, true); + if (ret) + netdev_err(priv->dev, "Rxmux setup failed\n"); + } + netif_device_attach(ndev); return 0; diff --git a/include/linux/stmmac.h b/include/linux/stmmac.h index 84e13bd5df28..f017b818d421 100644 --- a/include/linux/stmmac.h +++ b/include/linux/stmmac.h @@ -264,6 +264,7 @@ struct plat_stmmacenet_data { void (*ptp_clk_freq_config)(struct stmmac_priv *priv); int (*init)(struct platform_device *pdev, void *priv); void (*exit)(struct platform_device *pdev, void *priv); + int (*rxmux_setup)(void *priv, bool external); struct mac_device_info *(*setup)(void *priv); int (*clks_config)(void *priv, bool enabled); int (*crosststamp)(ktime_t *device, struct system_counterval_t *system,