| Message ID | 20240919123954.33000-1-inbaraj.e@samsung.com (mailing list archive) |
|---|---|
| State | New |
| Headers | show |
| Series | [v2] clk: samsung: fsd: Mark PLL_CAM_CSI as critical | expand |
On 19/09/2024 14:39, Inbaraj E wrote: > PLL_CAM_CSI is the parent clock for the ACLK and PCLK in the CMU_CAM_CSI > block. When we gate ACLK or PCLK, the clock framework will subsequently > disables the parent clocks(PLL_CAM_CSI). Disabling PLL_CAM_CSI is causing > system level halt. > > It was observed on FSD SoC, when we gate the ACLK and PCLK during CSI stop > streaming through pm_runtime_put system is getting halted. So marking > PLL_CAM_CSI as critical to prevent disabling. No, please do not send new versions while discussion is going. See my replies in previous version. Also, if this stays, then you miss Cc-stable. Best regards, Krzysztof
diff --git a/drivers/clk/samsung/clk-fsd.c b/drivers/clk/samsung/clk-fsd.c index 6f984cfcd33c..d62981e4b1d6 100644 --- a/drivers/clk/samsung/clk-fsd.c +++ b/drivers/clk/samsung/clk-fsd.c @@ -1637,8 +1637,13 @@ static const struct samsung_pll_rate_table pll_cam_csi_rate_table[] __initconst }; static const struct samsung_pll_clock cam_csi_pll_clks[] __initconst = { - PLL(pll_142xx, 0, "fout_pll_cam_csi", "fin_pll", - PLL_LOCKTIME_PLL_CAM_CSI, PLL_CON0_PLL_CAM_CSI, pll_cam_csi_rate_table), + /* + * PLL_CAM_CSI will never be turned off because PLL_CAM_CSI is + * supplying clock to CMU SFR of CAM_CSI block. + */ + __PLL(pll_142xx, 0, "fout_pll_cam_csi", "fin_pll", + CLK_GET_RATE_NOCACHE | CLK_IS_CRITICAL, PLL_LOCKTIME_PLL_CAM_CSI, + PLL_CON0_PLL_CAM_CSI, pll_cam_csi_rate_table), }; PNAME(mout_cam_csi_pll_p) = { "fin_pll", "fout_pll_cam_csi" };
PLL_CAM_CSI is the parent clock for the ACLK and PCLK in the CMU_CAM_CSI block. When we gate ACLK or PCLK, the clock framework will subsequently disables the parent clocks(PLL_CAM_CSI). Disabling PLL_CAM_CSI is causing system level halt. It was observed on FSD SoC, when we gate the ACLK and PCLK during CSI stop streaming through pm_runtime_put system is getting halted. So marking PLL_CAM_CSI as critical to prevent disabling. Fixes: b826c3e4de1a ("clk: samsung: fsd: Add cam_csi block clock information") Signed-off-by: Inbaraj E <inbaraj.e@samsung.com> --- drivers/clk/samsung/clk-fsd.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-)