diff mbox series

[v6,2/4] arm64: dts: exynos: Add initial support for Samsung Galaxy S20 Series boards (hubble)

Message ID 20241206184609.2437-3-umer.uddin@mentallysanemainliners.org (mailing list archive)
State Accepted
Commit 38794a41be2bacc698fc520d75d3aea88c727a01
Headers show
Series Add minimal Samsung Galaxy S20 Series board, SM-G981B and SM-G980F support | expand

Commit Message

Umer Uddin Dec. 6, 2024, 6:46 p.m. UTC
Add initial support for the Samsung Galaxy S20 Series (hubble) phones.
They were launched in 2020, and are based on the Exynos 990 SoC.
The devices have multiple RAM configurations,
starting from 8GB going all the way up to 16GB for the S20 Ultra devices.

This device tree adds support for the following:

- SimpleFB
- 8GB RAM (Any more will be mapped in device trees)
- Buttons

Signed-off-by: Umer Uddin <umer.uddin@mentallysanemainliners.org>
---
 .../boot/dts/exynos/exynos990-x1s-common.dtsi | 98 +++++++++++++++++++
 1 file changed, 98 insertions(+)
 create mode 100644 arch/arm64/boot/dts/exynos/exynos990-x1s-common.dtsi
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/exynos/exynos990-x1s-common.dtsi b/arch/arm64/boot/dts/exynos/exynos990-x1s-common.dtsi
new file mode 100644
index 000000000..55fa8e9e0
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/exynos990-x1s-common.dtsi
@@ -0,0 +1,98 @@ 
+// SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause
+/*
+ * Samsung Galaxy S20 Series device tree source
+ *
+ * Copyright (c) 2024, Umer Uddin <umer.uddin@mentallysanemainliners.org>
+ */
+
+/dts-v1/;
+#include "exynos990.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		framebuffer0: framebuffer@f1000000 {
+			compatible = "simple-framebuffer";
+			reg = <0 0xf1000000 0 (1440 * 3200 * 4)>;
+			width = <1440>;
+			height = <3200>;
+			stride = <(1440 * 4)>;
+			format = "a8r8g8b8";
+		};
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		cont_splash_mem: framebuffer@f1000000 {
+			reg = <0 0xf1000000 0 0x1194000>;
+			no-map;
+		};
+
+		abox_reserved: audio@f7fb0000 {
+			reg = <0 0xf7fb0000 0 0x2a50000>;
+			no-map;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&key_power &key_voldown &key_volup>;
+		pinctrl-names = "default";
+
+		power-key {
+			label = "Power";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpa2 4 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+
+		voldown-key {
+			label = "Volume Down";
+			linux,code = <KEY_VOLUMEDOWN>;
+			gpios = <&gpa0 4 GPIO_ACTIVE_LOW>;
+		};
+
+		volup-key {
+			label = "Volume Up";
+			linux,code = <KEY_VOLUMEUP>;
+			gpios = <&gpa0 3 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&oscclk {
+	clock-frequency = <26000000>;
+};
+
+&pinctrl_alive {
+	key_power: key-power-pins {
+		samsung,pins = "gpa2-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	key_voldown: key-voldown-pins {
+		samsung,pins = "gpa0-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	key_volup: key-volup-pins {
+		samsung,pins = "gpa0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+};