| Message ID | 575774C0.4000900@rock-chips.com (mailing list archive) |
|---|---|
| State | Not Applicable |
| Headers | show |
On Wed, 8 Jun 2016 09:28:32 +0800 Yakir Yang <ykk@rock-chips.com> wrote: > Hi Javier, > > On 06/08/2016 01:06 AM, Javier Martinez Canillas wrote: > > Hello Yakir, > > > > On 03/17/2016 05:47 PM, Heiko Stübner wrote: > >> Split the dp core driver from exynos directory to bridge directory, > >> and rename the core driver to analogix_dp_*, rename the platform > >> code to exynos_dp. > >> > >> Beside the new analogix_dp driver would export six hooks. > >> "analogix_dp_bind()" and "analogix_dp_unbind()" > >> "analogix_dp_suspned()" and "analogix_dp_resume()" > >> "analogix_dp_detect()" and "analogix_dp_get_modes()" > >> > >> The bind/unbind symbols is used for analogix platform driver to connect > >> with analogix_dp core driver. And the detect/get_modes is used for analogix > >> platform driver to init the connector. > >> > >> They reason why connector need register in helper driver is rockchip drm > >> haven't implement the atomic API, but Exynos drm have implement it, so > >> there would need two different connector helper functions, that's why we > >> leave the connector register in helper driver. > >> > >> Signed-off-by: Yakir Yang <ykk@rock-chips.com> > >> --- > > Marc reported that his Exynos5250 Snow Chromebook fails to boot with v4.7-rc. > > > > I've done a git bisect and tracked down to this commit. The problem is a NULL > > pointer dereference to connector->dev in drm_mode_create(connector->dev) when > > called from exynos_dp_get_modes(). The error log is at [1]. > > > > I'm trying to figure out the issue but wanted to mention in case you have any > > hints about what could be the cause. AFAICT the problem is related to the fact > > that drm_connector_init() is called in analogix_dp_bridge_attach() and the > > connector passed as argument is the one in struct analogix_dp_device *dp, but > > later exynos_dp_get_modes() calls drm_mode_create() passing the connector in > > struct exynos_dp_device *dp, which has not been previously initialized. > > Agree, this should be the problem, exynos_dp->connector haven't been > initialized, driver should make exynos_dp->dp to a connector point, and > record the passing connector in exynos_dp_bridge_attach(), that should > fix this problem. > > > Thanks, > - Yakir > > > diff --git a/drivers/gpu/drm/exynos/exynos_dp.c > b/drivers/gpu/drm/exynos/exynos_dp.c > index 468498e..4c1fb3f 100644 > --- a/drivers/gpu/drm/exynos/exynos_dp.c > +++ b/drivers/gpu/drm/exynos/exynos_dp.c > @@ -34,7 +34,7 @@ > > struct exynos_dp_device { > struct drm_encoder encoder; > - struct drm_connector connector; > + struct drm_connector *connector; > struct drm_bridge *ptn_bridge; > struct drm_device *drm_dev; > struct device *dev; > @@ -70,7 +70,7 @@ static int exynos_dp_poweroff(struct > analogix_dp_plat_data *plat_data) > static int exynos_dp_get_modes(struct analogix_dp_plat_data *plat_data) > { > struct exynos_dp_device *dp = to_dp(plat_data); > - struct drm_connector *connector = &dp->connector; > + struct drm_connector *connector = dp->connector; > struct drm_display_mode *mode; > int num_modes = 0; > > @@ -103,6 +103,7 @@ static int exynos_dp_bridge_attach(struct > analogix_dp_plat_data *plat_data, > int ret; > > drm_connector_register(connector); > + dp->connector = connector; > > /* Pre-empt DP connector creation if there's a bridge */ > if (dp->ptn_bridge) { > I've just tested this change, and in combination with Javier's DT patch, my Snow is back to its useful state (I'm writing this email from that very Chromebook). Once you make this a proper patch, please add my: Tested-by: Marc Zyngier <marc.zyngier@arm.com> to it. Thanks a lot to you and Javier for tracking this down! M.
Marc, Javier On 06/08/2016 03:44 PM, Marc Zyngier wrote: > On Wed, 8 Jun 2016 09:28:32 +0800 > Yakir Yang <ykk@rock-chips.com> wrote: > >> Hi Javier, >> >> On 06/08/2016 01:06 AM, Javier Martinez Canillas wrote: >>> Hello Yakir, >>> >>> On 03/17/2016 05:47 PM, Heiko Stübner wrote: >>>> Split the dp core driver from exynos directory to bridge directory, >>>> and rename the core driver to analogix_dp_*, rename the platform >>>> code to exynos_dp. >>>> >>>> Beside the new analogix_dp driver would export six hooks. >>>> "analogix_dp_bind()" and "analogix_dp_unbind()" >>>> "analogix_dp_suspned()" and "analogix_dp_resume()" >>>> "analogix_dp_detect()" and "analogix_dp_get_modes()" >>>> >>>> The bind/unbind symbols is used for analogix platform driver to connect >>>> with analogix_dp core driver. And the detect/get_modes is used for analogix >>>> platform driver to init the connector. >>>> >>>> They reason why connector need register in helper driver is rockchip drm >>>> haven't implement the atomic API, but Exynos drm have implement it, so >>>> there would need two different connector helper functions, that's why we >>>> leave the connector register in helper driver. >>>> >>>> Signed-off-by: Yakir Yang <ykk@rock-chips.com> >>>> --- >>> Marc reported that his Exynos5250 Snow Chromebook fails to boot with v4.7-rc. >>> >>> I've done a git bisect and tracked down to this commit. The problem is a NULL >>> pointer dereference to connector->dev in drm_mode_create(connector->dev) when >>> called from exynos_dp_get_modes(). The error log is at [1]. >>> >>> I'm trying to figure out the issue but wanted to mention in case you have any >>> hints about what could be the cause. AFAICT the problem is related to the fact >>> that drm_connector_init() is called in analogix_dp_bridge_attach() and the >>> connector passed as argument is the one in struct analogix_dp_device *dp, but >>> later exynos_dp_get_modes() calls drm_mode_create() passing the connector in >>> struct exynos_dp_device *dp, which has not been previously initialized. >> Agree, this should be the problem, exynos_dp->connector haven't been >> initialized, driver should make exynos_dp->dp to a connector point, and >> record the passing connector in exynos_dp_bridge_attach(), that should >> fix this problem. >> >> >> Thanks, >> - Yakir >> >> >> diff --git a/drivers/gpu/drm/exynos/exynos_dp.c >> b/drivers/gpu/drm/exynos/exynos_dp.c >> index 468498e..4c1fb3f 100644 >> --- a/drivers/gpu/drm/exynos/exynos_dp.c >> +++ b/drivers/gpu/drm/exynos/exynos_dp.c >> @@ -34,7 +34,7 @@ >> >> struct exynos_dp_device { >> struct drm_encoder encoder; >> - struct drm_connector connector; >> + struct drm_connector *connector; >> struct drm_bridge *ptn_bridge; >> struct drm_device *drm_dev; >> struct device *dev; >> @@ -70,7 +70,7 @@ static int exynos_dp_poweroff(struct >> analogix_dp_plat_data *plat_data) >> static int exynos_dp_get_modes(struct analogix_dp_plat_data *plat_data) >> { >> struct exynos_dp_device *dp = to_dp(plat_data); >> - struct drm_connector *connector = &dp->connector; >> + struct drm_connector *connector = dp->connector; >> struct drm_display_mode *mode; >> int num_modes = 0; >> >> @@ -103,6 +103,7 @@ static int exynos_dp_bridge_attach(struct >> analogix_dp_plat_data *plat_data, >> int ret; >> >> drm_connector_register(connector); >> + dp->connector = connector; >> >> /* Pre-empt DP connector creation if there's a bridge */ >> if (dp->ptn_bridge) { >> > I've just tested this change, and in combination with Javier's DT patch, > my Snow is back to its useful state (I'm writing this email from that > very Chromebook). > > Once you make this a proper patch, please add my: > > Tested-by: Marc Zyngier <marc.zyngier@arm.com> I guess Javier should be the best one to create this patch, if he have no time, i would do it for him. thanks for your report ;) - Yakir > to it. > > Thanks a lot to you and Javier for tracking this down! > > M. -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 06/08/2016 06:53 AM, Yakir Yang wrote: > Marc, Javier > > On 06/08/2016 03:44 PM, Marc Zyngier wrote: >> On Wed, 8 Jun 2016 09:28:32 +0800 >> Yakir Yang <ykk@rock-chips.com> wrote: >> >>> Hi Javier, >>> >>> On 06/08/2016 01:06 AM, Javier Martinez Canillas wrote: >>>> Hello Yakir, >>>> >>>> On 03/17/2016 05:47 PM, Heiko Stübner wrote: >>>>> Split the dp core driver from exynos directory to bridge directory, >>>>> and rename the core driver to analogix_dp_*, rename the platform >>>>> code to exynos_dp. >>>>> >>>>> Beside the new analogix_dp driver would export six hooks. >>>>> "analogix_dp_bind()" and "analogix_dp_unbind()" >>>>> "analogix_dp_suspned()" and "analogix_dp_resume()" >>>>> "analogix_dp_detect()" and "analogix_dp_get_modes()" >>>>> >>>>> The bind/unbind symbols is used for analogix platform driver to connect >>>>> with analogix_dp core driver. And the detect/get_modes is used for analogix >>>>> platform driver to init the connector. >>>>> >>>>> They reason why connector need register in helper driver is rockchip drm >>>>> haven't implement the atomic API, but Exynos drm have implement it, so >>>>> there would need two different connector helper functions, that's why we >>>>> leave the connector register in helper driver. >>>>> >>>>> Signed-off-by: Yakir Yang <ykk@rock-chips.com> >>>>> --- >>>> Marc reported that his Exynos5250 Snow Chromebook fails to boot with v4.7-rc. >>>> >>>> I've done a git bisect and tracked down to this commit. The problem is a NULL >>>> pointer dereference to connector->dev in drm_mode_create(connector->dev) when >>>> called from exynos_dp_get_modes(). The error log is at [1]. >>>> >>>> I'm trying to figure out the issue but wanted to mention in case you have any >>>> hints about what could be the cause. AFAICT the problem is related to the fact >>>> that drm_connector_init() is called in analogix_dp_bridge_attach() and the >>>> connector passed as argument is the one in struct analogix_dp_device *dp, but >>>> later exynos_dp_get_modes() calls drm_mode_create() passing the connector in >>>> struct exynos_dp_device *dp, which has not been previously initialized. >>> Agree, this should be the problem, exynos_dp->connector haven't been >>> initialized, driver should make exynos_dp->dp to a connector point, and >>> record the passing connector in exynos_dp_bridge_attach(), that should >>> fix this problem. >>> >>> >>> Thanks, >>> - Yakir >>> >>> >>> diff --git a/drivers/gpu/drm/exynos/exynos_dp.c >>> b/drivers/gpu/drm/exynos/exynos_dp.c >>> index 468498e..4c1fb3f 100644 >>> --- a/drivers/gpu/drm/exynos/exynos_dp.c >>> +++ b/drivers/gpu/drm/exynos/exynos_dp.c >>> @@ -34,7 +34,7 @@ >>> >>> struct exynos_dp_device { >>> struct drm_encoder encoder; >>> - struct drm_connector connector; >>> + struct drm_connector *connector; >>> struct drm_bridge *ptn_bridge; >>> struct drm_device *drm_dev; >>> struct device *dev; >>> @@ -70,7 +70,7 @@ static int exynos_dp_poweroff(struct >>> analogix_dp_plat_data *plat_data) >>> static int exynos_dp_get_modes(struct analogix_dp_plat_data *plat_data) >>> { >>> struct exynos_dp_device *dp = to_dp(plat_data); >>> - struct drm_connector *connector = &dp->connector; >>> + struct drm_connector *connector = dp->connector; >>> struct drm_display_mode *mode; >>> int num_modes = 0; >>> >>> @@ -103,6 +103,7 @@ static int exynos_dp_bridge_attach(struct >>> analogix_dp_plat_data *plat_data, >>> int ret; >>> >>> drm_connector_register(connector); >>> + dp->connector = connector; >>> >>> /* Pre-empt DP connector creation if there's a bridge */ >>> if (dp->ptn_bridge) { >>> >> I've just tested this change, and in combination with Javier's DT patch, >> my Snow is back to its useful state (I'm writing this email from that >> very Chromebook). >> Great. I also tested and the Snow booted but I don't have physical access to check if the display was brought correctly, So thanks a lot for testing. >> Once you make this a proper patch, please add my: >> >> Tested-by: Marc Zyngier <marc.zyngier@arm.com> > > I guess Javier should be the best one to create this patch, if he have no time, i would do it for him. thanks for your report ;) > Done. > - Yakir > >> to it. >> >> Thanks a lot to you and Javier for tracking this down! >> Thanks to you for reporting all the issues! Best regards,
diff --git a/drivers/gpu/drm/exynos/exynos_dp.c b/drivers/gpu/drm/exynos/exynos_dp.c index 468498e..4c1fb3f 100644 --- a/drivers/gpu/drm/exynos/exynos_dp.c +++ b/drivers/gpu/drm/exynos/exynos_dp.c @@ -34,7 +34,7 @@ struct exynos_dp_device { struct drm_encoder encoder; - struct drm_connector connector; + struct drm_connector *connector; struct drm_bridge *ptn_bridge; struct drm_device *drm_dev; struct device *dev; @@ -70,7 +70,7 @@ static int exynos_dp_poweroff(struct analogix_dp_plat_data *plat_data) static int exynos_dp_get_modes(struct analogix_dp_plat_data *plat_data) { struct exynos_dp_device *dp = to_dp(plat_data); - struct drm_connector *connector = &dp->connector; + struct drm_connector *connector = dp->connector; struct drm_display_mode *mode; int num_modes = 0;