[0/2] Fix use-after-free in iscsi_sw_tcp_host_get_param()

Message

Wenchao Hao April 7, 2021, 1:24 a.m. UTC

Following stack is reported by KASAN:

[29844.848044] sd 2:0:0:1: [sdj] Synchronizing SCSI cache
[29844.923745] scsi 2:0:0:1: alua: Detached
[29844.927840] ==================================================================
[29844.927861] BUG: KASAN: use-after-free in iscsi_sw_tcp_host_get_param+0xf4/0x218 [iscsi_tcp]
[29844.927864] Read of size 8 at addr ffff80002c0b8f68 by task iscsiadm/523945
[29844.927871] CPU: 1 PID: 523945 Comm: iscsiadm Kdump: loaded Not tainted 4.19.90.kasan.aarch64
[29844.927873] Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015
[29844.927875] Call trace:
[29844.927884]  dump_backtrace+0x0/0x270
[29844.927886]  show_stack+0x24/0x30
[29844.927895]  dump_stack+0xc4/0x120
[29844.927902]  print_address_description+0x68/0x278
[29844.927904]  kasan_report+0x20c/0x338
[29844.927906]  __asan_load8+0x88/0xb0
[29844.927910]  iscsi_sw_tcp_host_get_param+0xf4/0x218 [iscsi_tcp]
[29844.927932]  show_host_param_ISCSI_HOST_PARAM_IPADDRESS+0x84/0xa0 [scsi_transport_iscsi]
[29844.927938]  dev_attr_show+0x48/0x90
[29844.927943]  sysfs_kf_seq_show+0x100/0x1e0
[29844.927946]  kernfs_seq_show+0x88/0xa0
[29844.927949]  seq_read+0x164/0x748
[29844.927951]  kernfs_fop_read+0x204/0x308
[29844.927956]  __vfs_read+0xd4/0x2d8
[29844.927958]  vfs_read+0xa8/0x198
[29844.927960]  ksys_read+0xd0/0x180
[29844.927962]  __arm64_sys_read+0x4c/0x60
[29844.927966]  el0_svc_common+0xa8/0x230
[29844.927969]  el0_svc_handler+0xdc/0x138
[29844.927971]  el0_svc+0x10/0x218

[29844.928063] Freed by task 53358:
[29844.928066]  __kasan_slab_free+0x120/0x228
[29844.928068]  kasan_slab_free+0x10/0x18
[29844.928069]  kfree+0x98/0x278
[29844.928083]  iscsi_session_release+0x84/0xa0 [scsi_transport_iscsi]
[29844.928085]  device_release+0x4c/0x100
[29844.928089]  kobject_put+0xc4/0x288
[29844.928091]  put_device+0x24/0x30
[29844.928105]  iscsi_free_session+0x60/0x70 [scsi_transport_iscsi]
[29844.928112]  iscsi_session_teardown+0x134/0x158 [libiscsi]
[29844.928116]  iscsi_sw_tcp_session_destroy+0x7c/0xd8 [iscsi_tcp]
[29844.928129]  iscsi_if_rx+0x1538/0x1f00 [scsi_transport_iscsi]
[29844.928131]  netlink_unicast+0x338/0x3c8
[29844.928133]  netlink_sendmsg+0x51c/0x588
[29844.928135]  sock_sendmsg+0x74/0x98
[29844.928137]  ___sys_sendmsg+0x434/0x470
[29844.928139]  __sys_sendmsg+0xd4/0x148
[29844.928141]  __arm64_sys_sendmsg+0x50/0x60
[29844.928143]  el0_svc_common+0xa8/0x230
[29844.928146]  el0_svc_handler+0xdc/0x138
[29844.928147]  el0_svc+0x10/0x218
[29844.928148]
[29844.928150] The buggy address belongs to the object at ffff80002c0b8880#012 which belongs to the cache kmalloc-2048 of size 2048
[29844.928153] The buggy address is located 1768 bytes inside of#012 2048-byte region [ffff80002c0b8880, ffff80002c0b9080)
[29844.928154] The buggy address belongs to the page:
[29844.928158] page:ffff7e0000b02e00 count:1 mapcount:0 mapping:ffff8000d8402600 index:0x0 compound_mapcount: 0
[29844.928902] flags: 0x7fffe0000008100(slab|head)
[29844.929215] raw: 07fffe0000008100 ffff7e0003535e08 ffff7e00024a9408 ffff8000d8402600
[29844.929217] raw: 0000000000000000 00000000000f000f 00000001ffffffff 0000000000000000
[29844.929219] page dumped because: kasan: bad access detected
[29844.929219]
[29844.929221] Memory state around the buggy address:
[29844.929223]  ffff80002c0b8e00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[29844.929225]  ffff80002c0b8e80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[29844.929227] >ffff80002c0b8f00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[29844.929228]
^
[29844.929230]  ffff80002c0b8f80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[29844.929232]  ffff80002c0b9000: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[29844.929232]
==================================================================
[29844.929234] Disabling lock debugging due to kernel taint
[29844.969534] scsi host2: iSCSI Initiator over TCP/IP

Fix this issue by freeing iscsi session after host already removed from sysfs.

Wenchao Hao (2):
  scsi: libiscsi: Split iscsi_session_teardown() to destroy and free
  scsi: iscsi_tcp: Fix use-after-free in iscsi_sw_tcp_host_get_param()

 drivers/scsi/iscsi_tcp.c | 27 ++++++++++++++++++---------
 drivers/scsi/libiscsi.c  | 19 ++++++++++++-------
 include/scsi/libiscsi.h  |  1 +
 3 files changed, 31 insertions(+), 16 deletions(-)