| Message ID | 20241008021822.2617339-1-liyihang9@huawei.com (mailing list archive) |
|---|---|
| Headers | show |
| Series | scsi: hisi_sas: Some fixes for hisi_sas | expand |
Yihang, > This series contains some fixes including: > - Adjust priority of registering and exiting debugfs for security; > - Create trigger_dump at the end of the debugfs initialization; > - Add firmware information check; > - Enable all PHYs that are not disabled by user during controller reset; > - Reset PHY again if phyup timeout; > - Check usage count only when the runtime PM status is RPM_SUSPENDING; > - Add cond_resched() for no forced preemption model; > - Default enable interrupt coalescing; > - Update disk locked timeout to 7 seconds; > - Add time interval between two H2D FIS following soft reset spec; > - Update v3 hw STP_LINK_TIMER setting; > - Create all dump files during debugfs initialization; > - Add latest_dump for the debugfs dump; Applied to 6.13/scsi-staging, thanks!
On Tue, 08 Oct 2024 10:18:09 +0800, Yihang Li wrote: > This series contains some fixes including: > - Adjust priority of registering and exiting debugfs for security; > - Create trigger_dump at the end of the debugfs initialization; > - Add firmware information check; > - Enable all PHYs that are not disabled by user during controller reset; > - Reset PHY again if phyup timeout; > - Check usage count only when the runtime PM status is RPM_SUSPENDING; > - Add cond_resched() for no forced preemption model; > - Default enable interrupt coalescing; > - Update disk locked timeout to 7 seconds; > - Add time interval between two H2D FIS following soft reset spec; > - Update v3 hw STP_LINK_TIMER setting; > - Create all dump files during debugfs initialization; > - Add latest_dump for the debugfs dump; > > [...] Applied to 6.13/scsi-queue, thanks! [01/13] scsi: hisi_sas: Adjust priority of registering and exiting debugfs for security https://git.kernel.org/mkp/scsi/c/e6702e391932 [02/13] scsi: hisi_sas: Create trigger_dump at the end of the debugfs initialization https://git.kernel.org/mkp/scsi/c/436a97c5d288 [03/13] scsi: hisi_sas: Add firmware information check https://git.kernel.org/mkp/scsi/c/2c335fa7e69c [04/13] scsi: hisi_sas: Enable all PHYs that are not disabled by user during controller reset https://git.kernel.org/mkp/scsi/c/08a07dc71d7f [05/13] scsi: hisi_sas: Reset PHY again if phyup timeout https://git.kernel.org/mkp/scsi/c/64359afb7068 [06/13] scsi: hisi_sas: Check usage count only when the runtime PM status is RPM_SUSPENDING https://git.kernel.org/mkp/scsi/c/4ca4ce000610 [07/13] scsi: hisi_sas: Add cond_resched() for no forced preemption model https://git.kernel.org/mkp/scsi/c/2233c4a0b948 [08/13] scsi: hisi_sas: Default enable interrupt coalescing https://git.kernel.org/mkp/scsi/c/a220bffebabe [09/13] scsi: hisi_sas: Update disk locked timeout to 7 seconds https://git.kernel.org/mkp/scsi/c/90b24856b311 [10/13] scsi: hisi_sas: Add time interval between two H2D FIS following soft reset spec https://git.kernel.org/mkp/scsi/c/3c62791322e4 [11/13] scsi: hisi_sas: Update v3 hw STP_LINK_TIMER setting https://git.kernel.org/mkp/scsi/c/90f17e3431d9 [12/13] scsi: hisi_sas: Create all dump files during debugfs initialization https://git.kernel.org/mkp/scsi/c/9f564f15f884 [13/13] scsi: hisi_sas: Add latest_dump for the debugfs dump https://git.kernel.org/mkp/scsi/c/cae668130c07
This series contains some fixes including: - Adjust priority of registering and exiting debugfs for security; - Create trigger_dump at the end of the debugfs initialization; - Add firmware information check; - Enable all PHYs that are not disabled by user during controller reset; - Reset PHY again if phyup timeout; - Check usage count only when the runtime PM status is RPM_SUSPENDING; - Add cond_resched() for no forced preemption model; - Default enable interrupt coalescing; - Update disk locked timeout to 7 seconds; - Add time interval between two H2D FIS following soft reset spec; - Update v3 hw STP_LINK_TIMER setting; - Create all dump files during debugfs initialization; - Add latest_dump for the debugfs dump; Changes since v1: - Use goto instead of return to fix the build error in patch 3. Xingui Yang (3): scsi: hisi_sas: Update disk locked timeout to 7 seconds scsi: hisi_sas: Add time interval between two H2D FIS following soft reset spec scsi: hisi_sas: Update v3 hw STP_LINK_TIMER setting Yihang Li (10): scsi: hisi_sas: Adjust priority of registering and exiting debugfs for security scsi: hisi_sas: Create trigger_dump at the end of the debugfs initialization scsi: hisi_sas: Add firmware information check scsi: hisi_sas: Enable all PHYs that are not disabled by user during controller reset scsi: hisi_sas: Reset PHY again if phyup timeout scsi: hisi_sas: Check usage count only when the runtime PM status is RPM_SUSPENDING scsi: hisi_sas: Add cond_resched() for no forced preemption model scsi: hisi_sas: Default enable interrupt coalescing scsi: hisi_sas: Create all dump files during debugfs initialization scsi: hisi_sas: Add latest_dump for the debugfs dump drivers/scsi/hisi_sas/hisi_sas.h | 1 + drivers/scsi/hisi_sas/hisi_sas_main.c | 31 +++- drivers/scsi/hisi_sas/hisi_sas_v1_hw.c | 18 +++ drivers/scsi/hisi_sas/hisi_sas_v2_hw.c | 18 +++ drivers/scsi/hisi_sas/hisi_sas_v3_hw.c | 187 ++++++++++++++++++------- 5 files changed, 204 insertions(+), 51 deletions(-)