@@ -353,17 +353,6 @@ typedef struct asc_scsi_q {
ushort next_sg_index;
} ASC_SCSI_Q;
-typedef struct asc_scsi_req_q {
- ASC_SCSIQ_1 r1;
- ASC_SCSIQ_2 r2;
- uchar *cdbptr;
- ASC_SG_HEAD *sg_head;
- uchar *sense_ptr;
- ASC_SCSIQ_3 r3;
- uchar cdb[ASC_MAX_CDB_LEN];
- uchar sense[ASC_MIN_SENSE_LEN];
-} ASC_SCSI_REQ_Q;
-
typedef struct asc_scsi_bios_req_q {
ASC_SCSIQ_1 r1;
ASC_SCSIQ_2 r2;
@@ -1707,7 +1696,7 @@ typedef struct adveep_38C1600_config {
typedef struct adv_carr_t {
__le32 carr_va; /* Carrier Virtual Address */
__le32 carr_pa; /* Carrier Physical Address */
- __le32 areq_vpa; /* ASC_SCSI_REQ_Q Virtual or Physical Address */
+ __le32 areq_vpa; /* ADV_SCSI_REQ_Q Virtual or Physical Address */
/*
* next_vpa [31:4] Carrier Virtual or Physical Next Pointer
*
@@ -1738,7 +1727,7 @@ typedef struct adv_carr_t {
(ADV_CARRIER_COUNT * sizeof(ADV_CARR_T))
/*
- * ASC_SCSI_REQ_Q 'a_flag' definitions
+ * ADV_SCSI_REQ_Q 'a_flag' definitions
*
* The Adv Library should limit use to the lower nibble (4 bits) of
* a_flag. Drivers are free to use the upper nibble (4 bits) of a_flag.
@@ -2029,7 +2018,7 @@ do { \
/*
* Abort an SRB in the chip's RISC Memory. The 'srb_tag' argument must
- * match the ASC_SCSI_REQ_Q 'srb_tag' field.
+ * match the ADV_SCSI_REQ_Q 'srb_tag' field.
*
* If the request has not yet been sent to the device it will simply be
* aborted from RISC memory. If the request is disconnected it will be
@@ -2075,7 +2064,7 @@ do { \
#define ADV_TID_TO_TIDMASK(tid) (0x01 << ((tid) & ADV_MAX_TID))
/*
- * ASC_SCSI_REQ_Q 'done_status' and 'host_status' return values.
+ * ADV_SCSI_REQ_Q 'done_status' and 'host_status' return values.
*/
#define QD_NO_STATUS 0x00 /* Request not completed yet. */
@@ -6237,9 +6226,9 @@ static int AdvISR(ADV_DVC_VAR *asc_dvc)
* Get a pointer to the newly completed ADV_SCSI_REQ_Q structure.
* The RISC will have set 'areq_vpa' to a virtual address.
*
- * The firmware will have copied the ASC_SCSI_REQ_Q.scsiq_ptr
+ * The firmware will have copied the ADV_SCSI_REQ_Q.scsiq_ptr
* field to the carrier ADV_CARR_T.areq_vpa field. The conversion
- * below complements the conversion of ASC_SCSI_REQ_Q.scsiq_ptr'
+ * below complements the conversion of ADV_SCSI_REQ_Q.scsiq_ptr'
* in AdvExeScsiQueue().
*/
u32 pa_offset = le32_to_cpu(asc_dvc->irq_sp->areq_vpa);
@@ -6751,9 +6740,9 @@ static void AscIsrChipHalted(ASC_DVC_VAR *asc_dvc)
q_addr = ASC_QNO_TO_QADDR(q_no);
/*
- * Convert the request's SRB pointer to a host ASC_SCSI_REQ
+ * Convert the request's SRB pointer to a host ASC_SCSI_Q
* structure pointer using a macro provided by the driver.
- * The ASC_SCSI_REQ pointer provides a pointer to the
+ * The ASC_SCSI_Q pointer provides a pointer to the
* host ASC_SG_HEAD structure.
*/
/* Read request's SRB pointer. */
@@ -7947,7 +7936,7 @@ adv_get_sglist(struct asc_board *boardp, adv_req_t *reqp,
* If an adv_req_t can not be allocated to issue the request,
* then return ASC_BUSY. If an error occurs, then return ASC_ERROR.
*
- * Multi-byte fields in the ASC_SCSI_REQ_Q that are used by the
+ * Multi-byte fields in the ADV_SCSI_REQ_Q that are used by the
* microcode for DMA addresses or math operations are byte swapped
* to little-endian order.
*/
@@ -8633,7 +8622,7 @@ static int AscExeScsiQueue(ASC_DVC_VAR *asc_dvc, ASC_SCSI_Q *scsiq)
* If 'done_status' is not set to QD_DO_RETRY, then 'error_retry' will be
* set to SCSI_MAX_RETRY.
*
- * Multi-byte fields in the ASC_SCSI_REQ_Q that are used by the microcode
+ * Multi-byte fields in the ADV_SCSI_REQ_Q that are used by the microcode
* for DMA addresses or math operations are byte swapped to little-endian
* order.
*
Removed unused structure ASC_SCSI_REQ_Q and update the comments to 'ADV_SCSI_REQ_Q'. Signed-off-by: Hannes Reinecke <hare@suse.de> --- drivers/scsi/advansys.c | 31 ++++++++++--------------------- 1 file changed, 10 insertions(+), 21 deletions(-)