@@ -1,4 +1,8 @@
# mpt2sas makefile
+
+# share the official mpi headers from the mpt3sas driver
+ccflags-y += -I$(src)/../mpt3sas
+
obj-$(CONFIG_SCSI_MPT2SAS) += mpt2sas.o
mpt2sas-y += mpt2sas_base.o \
mpt2sas_config.o \
deleted file mode 100644
@@ -1,1170 +0,0 @@
-/*
- * Copyright (c) 2000-2014 LSI Corporation.
- *
- *
- * Name: mpi2.h
- * Title: MPI Message independent structures and definitions
- * including System Interface Register Set and
- * scatter/gather formats.
- * Creation Date: June 21, 2006
- *
- * mpi2.h Version: 02.00.35
- *
- * Version History
- * ---------------
- *
- * Date Version Description
- * -------- -------- ------------------------------------------------------
- * 04-30-07 02.00.00 Corresponds to Fusion-MPT MPI Specification Rev A.
- * 06-04-07 02.00.01 Bumped MPI2_HEADER_VERSION_UNIT.
- * 06-26-07 02.00.02 Bumped MPI2_HEADER_VERSION_UNIT.
- * 08-31-07 02.00.03 Bumped MPI2_HEADER_VERSION_UNIT.
- * Moved ReplyPostHostIndex register to offset 0x6C of the
- * MPI2_SYSTEM_INTERFACE_REGS and modified the define for
- * MPI2_REPLY_POST_HOST_INDEX_OFFSET.
- * Added union of request descriptors.
- * Added union of reply descriptors.
- * 10-31-07 02.00.04 Bumped MPI2_HEADER_VERSION_UNIT.
- * Added define for MPI2_VERSION_02_00.
- * Fixed the size of the FunctionDependent5 field in the
- * MPI2_DEFAULT_REPLY structure.
- * 12-18-07 02.00.05 Bumped MPI2_HEADER_VERSION_UNIT.
- * Removed the MPI-defined Fault Codes and extended the
- * product specific codes up to 0xEFFF.
- * Added a sixth key value for the WriteSequence register
- * and changed the flush value to 0x0.
- * Added message function codes for Diagnostic Buffer Post
- * and Diagnsotic Release.
- * New IOCStatus define: MPI2_IOCSTATUS_DIAGNOSTIC_RELEASED
- * Moved MPI2_VERSION_UNION from mpi2_ioc.h.
- * 02-29-08 02.00.06 Bumped MPI2_HEADER_VERSION_UNIT.
- * 03-03-08 02.00.07 Bumped MPI2_HEADER_VERSION_UNIT.
- * 05-21-08 02.00.08 Bumped MPI2_HEADER_VERSION_UNIT.
- * Added #defines for marking a reply descriptor as unused.
- * 06-27-08 02.00.09 Bumped MPI2_HEADER_VERSION_UNIT.
- * 10-02-08 02.00.10 Bumped MPI2_HEADER_VERSION_UNIT.
- * Moved LUN field defines from mpi2_init.h.
- * 01-19-09 02.00.11 Bumped MPI2_HEADER_VERSION_UNIT.
- * 05-06-09 02.00.12 Bumped MPI2_HEADER_VERSION_UNIT.
- * In all request and reply descriptors, replaced VF_ID
- * field with MSIxIndex field.
- * Removed DevHandle field from
- * MPI2_SCSI_IO_SUCCESS_REPLY_DESCRIPTOR and made those
- * bytes reserved.
- * Added RAID Accelerator functionality.
- * 07-30-09 02.00.13 Bumped MPI2_HEADER_VERSION_UNIT.
- * 10-28-09 02.00.14 Bumped MPI2_HEADER_VERSION_UNIT.
- * Added MSI-x index mask and shift for Reply Post Host
- * Index register.
- * Added function code for Host Based Discovery Action.
- * 02-10-10 02.00.15 Bumped MPI2_HEADER_VERSION_UNIT.
- * Added define for MPI2_FUNCTION_PWR_MGMT_CONTROL.
- * Added defines for product-specific range of message
- * function codes, 0xF0 to 0xFF.
- * 05-12-10 02.00.16 Bumped MPI2_HEADER_VERSION_UNIT.
- * Added alternative defines for the SGE Direction bit.
- * 08-11-10 02.00.17 Bumped MPI2_HEADER_VERSION_UNIT.
- * 11-10-10 02.00.18 Bumped MPI2_HEADER_VERSION_UNIT.
- * Added MPI2_IEEE_SGE_FLAGS_SYSTEMPLBCPI_ADDR define.
- * 02-23-11 02.00.19 Bumped MPI2_HEADER_VERSION_UNIT.
- * Added MPI2_FUNCTION_SEND_HOST_MESSAGE.
- * 03-09-11 02.00.20 Bumped MPI2_HEADER_VERSION_UNIT.
- * 05-25-11 02.00.21 Bumped MPI2_HEADER_VERSION_UNIT.
- * 08-24-11 02.00.22 Bumped MPI2_HEADER_VERSION_UNIT.
- * 11-18-11 02.00.23 Bumped MPI2_HEADER_VERSION_UNIT.
- * 02-06-12 02.00.24 Bumped MPI2_HEADER_VERSION_UNIT.
- * 03-29-12 02.00.25 Bumped MPI2_HEADER_VERSION_UNIT.
- * Added Hard Reset delay timings.
- * 07-10-12 02.00.26 Bumped MPI2_HEADER_VERSION_UNIT.
- * 07-26-12 02.00.27 Bumped MPI2_HEADER_VERSION_UNIT.
- * 11-27-12 02.00.28 Bumped MPI2_HEADER_VERSION_UNIT.
- * 12-20-12 02.00.29 Bumped MPI2_HEADER_VERSION_UNIT.
- * Added MPI25_SUP_REPLY_POST_HOST_INDEX_OFFSET.
- * 04-09-13 02.00.30 Bumped MPI2_HEADER_VERSION_UNIT.
- * 04-17-13 02.00.31 Bumped MPI2_HEADER_VERSION_UNIT.
- * 08-19-13 02.00.32 Bumped MPI2_HEADER_VERSION_UNIT.
- * 12-05-13 02.00.33 Bumped MPI2_HEADER_VERSION_UNIT.
- * 01-08-14 02.00.34 Bumped MPI2_HEADER_VERSION_UNIT.
- * 06-13-14 02.00.35 Bumped MPI2_HEADER_VERSION_UNIT.
- * --------------------------------------------------------------------------
- */
-
-#ifndef MPI2_H
-#define MPI2_H
-
-
-/*****************************************************************************
-*
-* MPI Version Definitions
-*
-*****************************************************************************/
-
-#define MPI2_VERSION_MAJOR (0x02)
-#define MPI2_VERSION_MINOR (0x00)
-#define MPI2_VERSION_MAJOR_MASK (0xFF00)
-#define MPI2_VERSION_MAJOR_SHIFT (8)
-#define MPI2_VERSION_MINOR_MASK (0x00FF)
-#define MPI2_VERSION_MINOR_SHIFT (0)
-#define MPI2_VERSION ((MPI2_VERSION_MAJOR << MPI2_VERSION_MAJOR_SHIFT) | \
- MPI2_VERSION_MINOR)
-
-#define MPI2_VERSION_02_00 (0x0200)
-
-/* versioning for this MPI header set */
-#define MPI2_HEADER_VERSION_UNIT (0x23)
-#define MPI2_HEADER_VERSION_DEV (0x00)
-#define MPI2_HEADER_VERSION_UNIT_MASK (0xFF00)
-#define MPI2_HEADER_VERSION_UNIT_SHIFT (8)
-#define MPI2_HEADER_VERSION_DEV_MASK (0x00FF)
-#define MPI2_HEADER_VERSION_DEV_SHIFT (0)
-#define MPI2_HEADER_VERSION ((MPI2_HEADER_VERSION_UNIT << 8) | MPI2_HEADER_VERSION_DEV)
-
-
-/*****************************************************************************
-*
-* IOC State Definitions
-*
-*****************************************************************************/
-
-#define MPI2_IOC_STATE_RESET (0x00000000)
-#define MPI2_IOC_STATE_READY (0x10000000)
-#define MPI2_IOC_STATE_OPERATIONAL (0x20000000)
-#define MPI2_IOC_STATE_FAULT (0x40000000)
-
-#define MPI2_IOC_STATE_MASK (0xF0000000)
-#define MPI2_IOC_STATE_SHIFT (28)
-
-/* Fault state range for prodcut specific codes */
-#define MPI2_FAULT_PRODUCT_SPECIFIC_MIN (0x0000)
-#define MPI2_FAULT_PRODUCT_SPECIFIC_MAX (0xEFFF)
-
-
-/*****************************************************************************
-*
-* System Interface Register Definitions
-*
-*****************************************************************************/
-
-typedef volatile struct _MPI2_SYSTEM_INTERFACE_REGS
-{
- U32 Doorbell; /* 0x00 */
- U32 WriteSequence; /* 0x04 */
- U32 HostDiagnostic; /* 0x08 */
- U32 Reserved1; /* 0x0C */
- U32 DiagRWData; /* 0x10 */
- U32 DiagRWAddressLow; /* 0x14 */
- U32 DiagRWAddressHigh; /* 0x18 */
- U32 Reserved2[5]; /* 0x1C */
- U32 HostInterruptStatus; /* 0x30 */
- U32 HostInterruptMask; /* 0x34 */
- U32 DCRData; /* 0x38 */
- U32 DCRAddress; /* 0x3C */
- U32 Reserved3[2]; /* 0x40 */
- U32 ReplyFreeHostIndex; /* 0x48 */
- U32 Reserved4[8]; /* 0x4C */
- U32 ReplyPostHostIndex; /* 0x6C */
- U32 Reserved5; /* 0x70 */
- U32 HCBSize; /* 0x74 */
- U32 HCBAddressLow; /* 0x78 */
- U32 HCBAddressHigh; /* 0x7C */
- U32 Reserved6[16]; /* 0x80 */
- U32 RequestDescriptorPostLow; /* 0xC0 */
- U32 RequestDescriptorPostHigh; /* 0xC4 */
- U32 Reserved7[14]; /* 0xC8 */
-} MPI2_SYSTEM_INTERFACE_REGS, MPI2_POINTER PTR_MPI2_SYSTEM_INTERFACE_REGS,
- Mpi2SystemInterfaceRegs_t, MPI2_POINTER pMpi2SystemInterfaceRegs_t;
-
-/*
- * Defines for working with the Doorbell register.
- */
-#define MPI2_DOORBELL_OFFSET (0x00000000)
-
-/* IOC --> System values */
-#define MPI2_DOORBELL_USED (0x08000000)
-#define MPI2_DOORBELL_WHO_INIT_MASK (0x07000000)
-#define MPI2_DOORBELL_WHO_INIT_SHIFT (24)
-#define MPI2_DOORBELL_FAULT_CODE_MASK (0x0000FFFF)
-#define MPI2_DOORBELL_DATA_MASK (0x0000FFFF)
-
-/* System --> IOC values */
-#define MPI2_DOORBELL_FUNCTION_MASK (0xFF000000)
-#define MPI2_DOORBELL_FUNCTION_SHIFT (24)
-#define MPI2_DOORBELL_ADD_DWORDS_MASK (0x00FF0000)
-#define MPI2_DOORBELL_ADD_DWORDS_SHIFT (16)
-
-
-/*
- * Defines for the WriteSequence register
- */
-#define MPI2_WRITE_SEQUENCE_OFFSET (0x00000004)
-#define MPI2_WRSEQ_KEY_VALUE_MASK (0x0000000F)
-#define MPI2_WRSEQ_FLUSH_KEY_VALUE (0x0)
-#define MPI2_WRSEQ_1ST_KEY_VALUE (0xF)
-#define MPI2_WRSEQ_2ND_KEY_VALUE (0x4)
-#define MPI2_WRSEQ_3RD_KEY_VALUE (0xB)
-#define MPI2_WRSEQ_4TH_KEY_VALUE (0x2)
-#define MPI2_WRSEQ_5TH_KEY_VALUE (0x7)
-#define MPI2_WRSEQ_6TH_KEY_VALUE (0xD)
-
-/*
- * Defines for the HostDiagnostic register
- */
-#define MPI2_HOST_DIAGNOSTIC_OFFSET (0x00000008)
-
-#define MPI2_DIAG_BOOT_DEVICE_SELECT_MASK (0x00001800)
-#define MPI2_DIAG_BOOT_DEVICE_SELECT_DEFAULT (0x00000000)
-#define MPI2_DIAG_BOOT_DEVICE_SELECT_HCDW (0x00000800)
-
-#define MPI2_DIAG_CLEAR_FLASH_BAD_SIG (0x00000400)
-#define MPI2_DIAG_FORCE_HCB_ON_RESET (0x00000200)
-#define MPI2_DIAG_HCB_MODE (0x00000100)
-#define MPI2_DIAG_DIAG_WRITE_ENABLE (0x00000080)
-#define MPI2_DIAG_FLASH_BAD_SIG (0x00000040)
-#define MPI2_DIAG_RESET_HISTORY (0x00000020)
-#define MPI2_DIAG_DIAG_RW_ENABLE (0x00000010)
-#define MPI2_DIAG_RESET_ADAPTER (0x00000004)
-#define MPI2_DIAG_HOLD_IOC_RESET (0x00000002)
-
-/*
- * Offsets for DiagRWData and address
- */
-#define MPI2_DIAG_RW_DATA_OFFSET (0x00000010)
-#define MPI2_DIAG_RW_ADDRESS_LOW_OFFSET (0x00000014)
-#define MPI2_DIAG_RW_ADDRESS_HIGH_OFFSET (0x00000018)
-
-/*
- * Defines for the HostInterruptStatus register
- */
-#define MPI2_HOST_INTERRUPT_STATUS_OFFSET (0x00000030)
-#define MPI2_HIS_SYS2IOC_DB_STATUS (0x80000000)
-#define MPI2_HIS_IOP_DOORBELL_STATUS MPI2_HIS_SYS2IOC_DB_STATUS
-#define MPI2_HIS_RESET_IRQ_STATUS (0x40000000)
-#define MPI2_HIS_REPLY_DESCRIPTOR_INTERRUPT (0x00000008)
-#define MPI2_HIS_IOC2SYS_DB_STATUS (0x00000001)
-#define MPI2_HIS_DOORBELL_INTERRUPT MPI2_HIS_IOC2SYS_DB_STATUS
-
-/*
- * Defines for the HostInterruptMask register
- */
-#define MPI2_HOST_INTERRUPT_MASK_OFFSET (0x00000034)
-#define MPI2_HIM_RESET_IRQ_MASK (0x40000000)
-#define MPI2_HIM_REPLY_INT_MASK (0x00000008)
-#define MPI2_HIM_RIM MPI2_HIM_REPLY_INT_MASK
-#define MPI2_HIM_IOC2SYS_DB_MASK (0x00000001)
-#define MPI2_HIM_DIM MPI2_HIM_IOC2SYS_DB_MASK
-
-/*
- * Offsets for DCRData and address
- */
-#define MPI2_DCR_DATA_OFFSET (0x00000038)
-#define MPI2_DCR_ADDRESS_OFFSET (0x0000003C)
-
-/*
- * Offset for the Reply Free Queue
- */
-#define MPI2_REPLY_FREE_HOST_INDEX_OFFSET (0x00000048)
-
-/*
- * Defines for the Reply Descriptor Post Queue
- */
-#define MPI2_REPLY_POST_HOST_INDEX_OFFSET (0x0000006C)
-#define MPI2_REPLY_POST_HOST_INDEX_MASK (0x00FFFFFF)
-#define MPI2_RPHI_MSIX_INDEX_MASK (0xFF000000)
-#define MPI2_RPHI_MSIX_INDEX_SHIFT (24)
-#define MPI25_SUP_REPLY_POST_HOST_INDEX_OFFSET (0x0000030C) /* MPI v2.5 only */
-
-/*
- * Defines for the HCBSize and address
- */
-#define MPI2_HCB_SIZE_OFFSET (0x00000074)
-#define MPI2_HCB_SIZE_SIZE_MASK (0xFFFFF000)
-#define MPI2_HCB_SIZE_HCB_ENABLE (0x00000001)
-
-#define MPI2_HCB_ADDRESS_LOW_OFFSET (0x00000078)
-#define MPI2_HCB_ADDRESS_HIGH_OFFSET (0x0000007C)
-
-/*
- * Offsets for the Request Queue
- */
-#define MPI2_REQUEST_DESCRIPTOR_POST_LOW_OFFSET (0x000000C0)
-#define MPI2_REQUEST_DESCRIPTOR_POST_HIGH_OFFSET (0x000000C4)
-
-
-/* Hard Reset delay timings */
-#define MPI2_HARD_RESET_PCIE_FIRST_READ_DELAY_MICRO_SEC (50000)
-#define MPI2_HARD_RESET_PCIE_RESET_READ_WINDOW_MICRO_SEC (255000)
-#define MPI2_HARD_RESET_PCIE_SECOND_READ_DELAY_MICRO_SEC (256000)
-
-/*****************************************************************************
-*
-* Message Descriptors
-*
-*****************************************************************************/
-
-/* Request Descriptors */
-
-/* Default Request Descriptor */
-typedef struct _MPI2_DEFAULT_REQUEST_DESCRIPTOR
-{
- U8 RequestFlags; /* 0x00 */
- U8 MSIxIndex; /* 0x01 */
- U16 SMID; /* 0x02 */
- U16 LMID; /* 0x04 */
- U16 DescriptorTypeDependent; /* 0x06 */
-} MPI2_DEFAULT_REQUEST_DESCRIPTOR,
- MPI2_POINTER PTR_MPI2_DEFAULT_REQUEST_DESCRIPTOR,
- Mpi2DefaultRequestDescriptor_t, MPI2_POINTER pMpi2DefaultRequestDescriptor_t;
-
-/* defines for the RequestFlags field */
-#define MPI2_REQ_DESCRIPT_FLAGS_TYPE_MASK (0x0E)
-#define MPI2_REQ_DESCRIPT_FLAGS_SCSI_IO (0x00)
-#define MPI2_REQ_DESCRIPT_FLAGS_SCSI_TARGET (0x02)
-#define MPI2_REQ_DESCRIPT_FLAGS_HIGH_PRIORITY (0x06)
-#define MPI2_REQ_DESCRIPT_FLAGS_DEFAULT_TYPE (0x08)
-#define MPI2_REQ_DESCRIPT_FLAGS_RAID_ACCELERATOR (0x0A)
-
-#define MPI2_REQ_DESCRIPT_FLAGS_IOC_FIFO_MARKER (0x01)
-
-
-/* High Priority Request Descriptor */
-typedef struct _MPI2_HIGH_PRIORITY_REQUEST_DESCRIPTOR
-{
- U8 RequestFlags; /* 0x00 */
- U8 MSIxIndex; /* 0x01 */
- U16 SMID; /* 0x02 */
- U16 LMID; /* 0x04 */
- U16 Reserved1; /* 0x06 */
-} MPI2_HIGH_PRIORITY_REQUEST_DESCRIPTOR,
- MPI2_POINTER PTR_MPI2_HIGH_PRIORITY_REQUEST_DESCRIPTOR,
- Mpi2HighPriorityRequestDescriptor_t,
- MPI2_POINTER pMpi2HighPriorityRequestDescriptor_t;
-
-
-/* SCSI IO Request Descriptor */
-typedef struct _MPI2_SCSI_IO_REQUEST_DESCRIPTOR
-{
- U8 RequestFlags; /* 0x00 */
- U8 MSIxIndex; /* 0x01 */
- U16 SMID; /* 0x02 */
- U16 LMID; /* 0x04 */
- U16 DevHandle; /* 0x06 */
-} MPI2_SCSI_IO_REQUEST_DESCRIPTOR,
- MPI2_POINTER PTR_MPI2_SCSI_IO_REQUEST_DESCRIPTOR,
- Mpi2SCSIIORequestDescriptor_t, MPI2_POINTER pMpi2SCSIIORequestDescriptor_t;
-
-
-/* SCSI Target Request Descriptor */
-typedef struct _MPI2_SCSI_TARGET_REQUEST_DESCRIPTOR
-{
- U8 RequestFlags; /* 0x00 */
- U8 MSIxIndex; /* 0x01 */
- U16 SMID; /* 0x02 */
- U16 LMID; /* 0x04 */
- U16 IoIndex; /* 0x06 */
-} MPI2_SCSI_TARGET_REQUEST_DESCRIPTOR,
- MPI2_POINTER PTR_MPI2_SCSI_TARGET_REQUEST_DESCRIPTOR,
- Mpi2SCSITargetRequestDescriptor_t,
- MPI2_POINTER pMpi2SCSITargetRequestDescriptor_t;
-
-
-/* RAID Accelerator Request Descriptor */
-typedef struct _MPI2_RAID_ACCEL_REQUEST_DESCRIPTOR {
- U8 RequestFlags; /* 0x00 */
- U8 MSIxIndex; /* 0x01 */
- U16 SMID; /* 0x02 */
- U16 LMID; /* 0x04 */
- U16 Reserved; /* 0x06 */
-} MPI2_RAID_ACCEL_REQUEST_DESCRIPTOR,
- MPI2_POINTER PTR_MPI2_RAID_ACCEL_REQUEST_DESCRIPTOR,
- Mpi2RAIDAcceleratorRequestDescriptor_t,
- MPI2_POINTER pMpi2RAIDAcceleratorRequestDescriptor_t;
-
-
-/* union of Request Descriptors */
-typedef union _MPI2_REQUEST_DESCRIPTOR_UNION
-{
- MPI2_DEFAULT_REQUEST_DESCRIPTOR Default;
- MPI2_HIGH_PRIORITY_REQUEST_DESCRIPTOR HighPriority;
- MPI2_SCSI_IO_REQUEST_DESCRIPTOR SCSIIO;
- MPI2_SCSI_TARGET_REQUEST_DESCRIPTOR SCSITarget;
- MPI2_RAID_ACCEL_REQUEST_DESCRIPTOR RAIDAccelerator;
- U64 Words;
-} MPI2_REQUEST_DESCRIPTOR_UNION, MPI2_POINTER PTR_MPI2_REQUEST_DESCRIPTOR_UNION,
- Mpi2RequestDescriptorUnion_t, MPI2_POINTER pMpi2RequestDescriptorUnion_t;
-
-
-/* Reply Descriptors */
-
-/* Default Reply Descriptor */
-typedef struct _MPI2_DEFAULT_REPLY_DESCRIPTOR
-{
- U8 ReplyFlags; /* 0x00 */
- U8 MSIxIndex; /* 0x01 */
- U16 DescriptorTypeDependent1; /* 0x02 */
- U32 DescriptorTypeDependent2; /* 0x04 */
-} MPI2_DEFAULT_REPLY_DESCRIPTOR, MPI2_POINTER PTR_MPI2_DEFAULT_REPLY_DESCRIPTOR,
- Mpi2DefaultReplyDescriptor_t, MPI2_POINTER pMpi2DefaultReplyDescriptor_t;
-
-/* defines for the ReplyFlags field */
-#define MPI2_RPY_DESCRIPT_FLAGS_TYPE_MASK (0x0F)
-#define MPI2_RPY_DESCRIPT_FLAGS_SCSI_IO_SUCCESS (0x00)
-#define MPI2_RPY_DESCRIPT_FLAGS_ADDRESS_REPLY (0x01)
-#define MPI2_RPY_DESCRIPT_FLAGS_TARGETASSIST_SUCCESS (0x02)
-#define MPI2_RPY_DESCRIPT_FLAGS_TARGET_COMMAND_BUFFER (0x03)
-#define MPI2_RPY_DESCRIPT_FLAGS_RAID_ACCELERATOR_SUCCESS (0x05)
-#define MPI2_RPY_DESCRIPT_FLAGS_UNUSED (0x0F)
-
-/* values for marking a reply descriptor as unused */
-#define MPI2_RPY_DESCRIPT_UNUSED_WORD0_MARK (0xFFFFFFFF)
-#define MPI2_RPY_DESCRIPT_UNUSED_WORD1_MARK (0xFFFFFFFF)
-
-/* Address Reply Descriptor */
-typedef struct _MPI2_ADDRESS_REPLY_DESCRIPTOR
-{
- U8 ReplyFlags; /* 0x00 */
- U8 MSIxIndex; /* 0x01 */
- U16 SMID; /* 0x02 */
- U32 ReplyFrameAddress; /* 0x04 */
-} MPI2_ADDRESS_REPLY_DESCRIPTOR, MPI2_POINTER PTR_MPI2_ADDRESS_REPLY_DESCRIPTOR,
- Mpi2AddressReplyDescriptor_t, MPI2_POINTER pMpi2AddressReplyDescriptor_t;
-
-#define MPI2_ADDRESS_REPLY_SMID_INVALID (0x00)
-
-
-/* SCSI IO Success Reply Descriptor */
-typedef struct _MPI2_SCSI_IO_SUCCESS_REPLY_DESCRIPTOR
-{
- U8 ReplyFlags; /* 0x00 */
- U8 MSIxIndex; /* 0x01 */
- U16 SMID; /* 0x02 */
- U16 TaskTag; /* 0x04 */
- U16 Reserved1; /* 0x06 */
-} MPI2_SCSI_IO_SUCCESS_REPLY_DESCRIPTOR,
- MPI2_POINTER PTR_MPI2_SCSI_IO_SUCCESS_REPLY_DESCRIPTOR,
- Mpi2SCSIIOSuccessReplyDescriptor_t,
- MPI2_POINTER pMpi2SCSIIOSuccessReplyDescriptor_t;
-
-
-/* TargetAssist Success Reply Descriptor */
-typedef struct _MPI2_TARGETASSIST_SUCCESS_REPLY_DESCRIPTOR
-{
- U8 ReplyFlags; /* 0x00 */
- U8 MSIxIndex; /* 0x01 */
- U16 SMID; /* 0x02 */
- U8 SequenceNumber; /* 0x04 */
- U8 Reserved1; /* 0x05 */
- U16 IoIndex; /* 0x06 */
-} MPI2_TARGETASSIST_SUCCESS_REPLY_DESCRIPTOR,
- MPI2_POINTER PTR_MPI2_TARGETASSIST_SUCCESS_REPLY_DESCRIPTOR,
- Mpi2TargetAssistSuccessReplyDescriptor_t,
- MPI2_POINTER pMpi2TargetAssistSuccessReplyDescriptor_t;
-
-
-/* Target Command Buffer Reply Descriptor */
-typedef struct _MPI2_TARGET_COMMAND_BUFFER_REPLY_DESCRIPTOR
-{
- U8 ReplyFlags; /* 0x00 */
- U8 MSIxIndex; /* 0x01 */
- U8 VP_ID; /* 0x02 */
- U8 Flags; /* 0x03 */
- U16 InitiatorDevHandle; /* 0x04 */
- U16 IoIndex; /* 0x06 */
-} MPI2_TARGET_COMMAND_BUFFER_REPLY_DESCRIPTOR,
- MPI2_POINTER PTR_MPI2_TARGET_COMMAND_BUFFER_REPLY_DESCRIPTOR,
- Mpi2TargetCommandBufferReplyDescriptor_t,
- MPI2_POINTER pMpi2TargetCommandBufferReplyDescriptor_t;
-
-/* defines for Flags field */
-#define MPI2_RPY_DESCRIPT_TCB_FLAGS_PHYNUM_MASK (0x3F)
-
-
-/* RAID Accelerator Success Reply Descriptor */
-typedef struct _MPI2_RAID_ACCELERATOR_SUCCESS_REPLY_DESCRIPTOR {
- U8 ReplyFlags; /* 0x00 */
- U8 MSIxIndex; /* 0x01 */
- U16 SMID; /* 0x02 */
- U32 Reserved; /* 0x04 */
-} MPI2_RAID_ACCELERATOR_SUCCESS_REPLY_DESCRIPTOR,
- MPI2_POINTER PTR_MPI2_RAID_ACCELERATOR_SUCCESS_REPLY_DESCRIPTOR,
- Mpi2RAIDAcceleratorSuccessReplyDescriptor_t,
- MPI2_POINTER pMpi2RAIDAcceleratorSuccessReplyDescriptor_t;
-
-
-/* union of Reply Descriptors */
-typedef union _MPI2_REPLY_DESCRIPTORS_UNION
-{
- MPI2_DEFAULT_REPLY_DESCRIPTOR Default;
- MPI2_ADDRESS_REPLY_DESCRIPTOR AddressReply;
- MPI2_SCSI_IO_SUCCESS_REPLY_DESCRIPTOR SCSIIOSuccess;
- MPI2_TARGETASSIST_SUCCESS_REPLY_DESCRIPTOR TargetAssistSuccess;
- MPI2_TARGET_COMMAND_BUFFER_REPLY_DESCRIPTOR TargetCommandBuffer;
- MPI2_RAID_ACCELERATOR_SUCCESS_REPLY_DESCRIPTOR RAIDAcceleratorSuccess;
- U64 Words;
-} MPI2_REPLY_DESCRIPTORS_UNION, MPI2_POINTER PTR_MPI2_REPLY_DESCRIPTORS_UNION,
-Mpi2ReplyDescriptorsUnion_t, MPI2_POINTER pMpi2ReplyDescriptorsUnion_t;
-
-
-
-/*****************************************************************************
-*
-* Message Functions
-*
-*****************************************************************************/
-
-#define MPI2_FUNCTION_SCSI_IO_REQUEST (0x00) /* SCSI IO */
-#define MPI2_FUNCTION_SCSI_TASK_MGMT (0x01) /* SCSI Task Management */
-#define MPI2_FUNCTION_IOC_INIT (0x02) /* IOC Init */
-#define MPI2_FUNCTION_IOC_FACTS (0x03) /* IOC Facts */
-#define MPI2_FUNCTION_CONFIG (0x04) /* Configuration */
-#define MPI2_FUNCTION_PORT_FACTS (0x05) /* Port Facts */
-#define MPI2_FUNCTION_PORT_ENABLE (0x06) /* Port Enable */
-#define MPI2_FUNCTION_EVENT_NOTIFICATION (0x07) /* Event Notification */
-#define MPI2_FUNCTION_EVENT_ACK (0x08) /* Event Acknowledge */
-#define MPI2_FUNCTION_FW_DOWNLOAD (0x09) /* FW Download */
-#define MPI2_FUNCTION_TARGET_ASSIST (0x0B) /* Target Assist */
-#define MPI2_FUNCTION_TARGET_STATUS_SEND (0x0C) /* Target Status Send */
-#define MPI2_FUNCTION_TARGET_MODE_ABORT (0x0D) /* Target Mode Abort */
-#define MPI2_FUNCTION_FW_UPLOAD (0x12) /* FW Upload */
-#define MPI2_FUNCTION_RAID_ACTION (0x15) /* RAID Action */
-#define MPI2_FUNCTION_RAID_SCSI_IO_PASSTHROUGH (0x16) /* SCSI IO RAID Passthrough */
-#define MPI2_FUNCTION_TOOLBOX (0x17) /* Toolbox */
-#define MPI2_FUNCTION_SCSI_ENCLOSURE_PROCESSOR (0x18) /* SCSI Enclosure Processor */
-#define MPI2_FUNCTION_SMP_PASSTHROUGH (0x1A) /* SMP Passthrough */
-#define MPI2_FUNCTION_SAS_IO_UNIT_CONTROL (0x1B) /* SAS IO Unit Control */
-#define MPI2_FUNCTION_SATA_PASSTHROUGH (0x1C) /* SATA Passthrough */
-#define MPI2_FUNCTION_DIAG_BUFFER_POST (0x1D) /* Diagnostic Buffer Post */
-#define MPI2_FUNCTION_DIAG_RELEASE (0x1E) /* Diagnostic Release */
-#define MPI2_FUNCTION_TARGET_CMD_BUF_BASE_POST (0x24) /* Target Command Buffer Post Base */
-#define MPI2_FUNCTION_TARGET_CMD_BUF_LIST_POST (0x25) /* Target Command Buffer Post List */
-#define MPI2_FUNCTION_RAID_ACCELERATOR (0x2C) /* RAID Accelerator*/
-/* Host Based Discovery Action */
-#define MPI2_FUNCTION_HOST_BASED_DISCOVERY_ACTION (0x2F)
-/* Power Management Control */
-#define MPI2_FUNCTION_PWR_MGMT_CONTROL (0x30)
-/* Send Host Message */
-#define MPI2_FUNCTION_SEND_HOST_MESSAGE (0x31)
-/* beginning of product-specific range */
-#define MPI2_FUNCTION_MIN_PRODUCT_SPECIFIC (0xF0)
-/* end of product-specific range */
-#define MPI2_FUNCTION_MAX_PRODUCT_SPECIFIC (0xFF)
-
-
-
-
-/* Doorbell functions */
-#define MPI2_FUNCTION_IOC_MESSAGE_UNIT_RESET (0x40)
-#define MPI2_FUNCTION_HANDSHAKE (0x42)
-
-
-/*****************************************************************************
-*
-* IOC Status Values
-*
-*****************************************************************************/
-
-/* mask for IOCStatus status value */
-#define MPI2_IOCSTATUS_MASK (0x7FFF)
-
-/****************************************************************************
-* Common IOCStatus values for all replies
-****************************************************************************/
-
-#define MPI2_IOCSTATUS_SUCCESS (0x0000)
-#define MPI2_IOCSTATUS_INVALID_FUNCTION (0x0001)
-#define MPI2_IOCSTATUS_BUSY (0x0002)
-#define MPI2_IOCSTATUS_INVALID_SGL (0x0003)
-#define MPI2_IOCSTATUS_INTERNAL_ERROR (0x0004)
-#define MPI2_IOCSTATUS_INVALID_VPID (0x0005)
-#define MPI2_IOCSTATUS_INSUFFICIENT_RESOURCES (0x0006)
-#define MPI2_IOCSTATUS_INVALID_FIELD (0x0007)
-#define MPI2_IOCSTATUS_INVALID_STATE (0x0008)
-#define MPI2_IOCSTATUS_OP_STATE_NOT_SUPPORTED (0x0009)
-
-/****************************************************************************
-* Config IOCStatus values
-****************************************************************************/
-
-#define MPI2_IOCSTATUS_CONFIG_INVALID_ACTION (0x0020)
-#define MPI2_IOCSTATUS_CONFIG_INVALID_TYPE (0x0021)
-#define MPI2_IOCSTATUS_CONFIG_INVALID_PAGE (0x0022)
-#define MPI2_IOCSTATUS_CONFIG_INVALID_DATA (0x0023)
-#define MPI2_IOCSTATUS_CONFIG_NO_DEFAULTS (0x0024)
-#define MPI2_IOCSTATUS_CONFIG_CANT_COMMIT (0x0025)
-
-/****************************************************************************
-* SCSI IO Reply
-****************************************************************************/
-
-#define MPI2_IOCSTATUS_SCSI_RECOVERED_ERROR (0x0040)
-#define MPI2_IOCSTATUS_SCSI_INVALID_DEVHANDLE (0x0042)
-#define MPI2_IOCSTATUS_SCSI_DEVICE_NOT_THERE (0x0043)
-#define MPI2_IOCSTATUS_SCSI_DATA_OVERRUN (0x0044)
-#define MPI2_IOCSTATUS_SCSI_DATA_UNDERRUN (0x0045)
-#define MPI2_IOCSTATUS_SCSI_IO_DATA_ERROR (0x0046)
-#define MPI2_IOCSTATUS_SCSI_PROTOCOL_ERROR (0x0047)
-#define MPI2_IOCSTATUS_SCSI_TASK_TERMINATED (0x0048)
-#define MPI2_IOCSTATUS_SCSI_RESIDUAL_MISMATCH (0x0049)
-#define MPI2_IOCSTATUS_SCSI_TASK_MGMT_FAILED (0x004A)
-#define MPI2_IOCSTATUS_SCSI_IOC_TERMINATED (0x004B)
-#define MPI2_IOCSTATUS_SCSI_EXT_TERMINATED (0x004C)
-
-/****************************************************************************
-* For use by SCSI Initiator and SCSI Target end-to-end data protection
-****************************************************************************/
-
-#define MPI2_IOCSTATUS_EEDP_GUARD_ERROR (0x004D)
-#define MPI2_IOCSTATUS_EEDP_REF_TAG_ERROR (0x004E)
-#define MPI2_IOCSTATUS_EEDP_APP_TAG_ERROR (0x004F)
-
-/****************************************************************************
-* SCSI Target values
-****************************************************************************/
-
-#define MPI2_IOCSTATUS_TARGET_INVALID_IO_INDEX (0x0062)
-#define MPI2_IOCSTATUS_TARGET_ABORTED (0x0063)
-#define MPI2_IOCSTATUS_TARGET_NO_CONN_RETRYABLE (0x0064)
-#define MPI2_IOCSTATUS_TARGET_NO_CONNECTION (0x0065)
-#define MPI2_IOCSTATUS_TARGET_XFER_COUNT_MISMATCH (0x006A)
-#define MPI2_IOCSTATUS_TARGET_DATA_OFFSET_ERROR (0x006D)
-#define MPI2_IOCSTATUS_TARGET_TOO_MUCH_WRITE_DATA (0x006E)
-#define MPI2_IOCSTATUS_TARGET_IU_TOO_SHORT (0x006F)
-#define MPI2_IOCSTATUS_TARGET_ACK_NAK_TIMEOUT (0x0070)
-#define MPI2_IOCSTATUS_TARGET_NAK_RECEIVED (0x0071)
-
-/****************************************************************************
-* Serial Attached SCSI values
-****************************************************************************/
-
-#define MPI2_IOCSTATUS_SAS_SMP_REQUEST_FAILED (0x0090)
-#define MPI2_IOCSTATUS_SAS_SMP_DATA_OVERRUN (0x0091)
-
-/****************************************************************************
-* Diagnostic Buffer Post / Diagnostic Release values
-****************************************************************************/
-
-#define MPI2_IOCSTATUS_DIAGNOSTIC_RELEASED (0x00A0)
-
-/****************************************************************************
-* RAID Accelerator values
-****************************************************************************/
-
-#define MPI2_IOCSTATUS_RAID_ACCEL_ERROR (0x00B0)
-
-/****************************************************************************
-* IOCStatus flag to indicate that log info is available
-****************************************************************************/
-
-#define MPI2_IOCSTATUS_FLAG_LOG_INFO_AVAILABLE (0x8000)
-
-/****************************************************************************
-* IOCLogInfo Types
-****************************************************************************/
-
-#define MPI2_IOCLOGINFO_TYPE_MASK (0xF0000000)
-#define MPI2_IOCLOGINFO_TYPE_SHIFT (28)
-#define MPI2_IOCLOGINFO_TYPE_NONE (0x0)
-#define MPI2_IOCLOGINFO_TYPE_SCSI (0x1)
-#define MPI2_IOCLOGINFO_TYPE_FC (0x2)
-#define MPI2_IOCLOGINFO_TYPE_SAS (0x3)
-#define MPI2_IOCLOGINFO_TYPE_ISCSI (0x4)
-#define MPI2_IOCLOGINFO_LOG_DATA_MASK (0x0FFFFFFF)
-
-
-/*****************************************************************************
-*
-* Standard Message Structures
-*
-*****************************************************************************/
-
-/****************************************************************************
-* Request Message Header for all request messages
-****************************************************************************/
-
-typedef struct _MPI2_REQUEST_HEADER
-{
- U16 FunctionDependent1; /* 0x00 */
- U8 ChainOffset; /* 0x02 */
- U8 Function; /* 0x03 */
- U16 FunctionDependent2; /* 0x04 */
- U8 FunctionDependent3; /* 0x06 */
- U8 MsgFlags; /* 0x07 */
- U8 VP_ID; /* 0x08 */
- U8 VF_ID; /* 0x09 */
- U16 Reserved1; /* 0x0A */
-} MPI2_REQUEST_HEADER, MPI2_POINTER PTR_MPI2_REQUEST_HEADER,
- MPI2RequestHeader_t, MPI2_POINTER pMPI2RequestHeader_t;
-
-
-/****************************************************************************
-* Default Reply
-****************************************************************************/
-
-typedef struct _MPI2_DEFAULT_REPLY
-{
- U16 FunctionDependent1; /* 0x00 */
- U8 MsgLength; /* 0x02 */
- U8 Function; /* 0x03 */
- U16 FunctionDependent2; /* 0x04 */
- U8 FunctionDependent3; /* 0x06 */
- U8 MsgFlags; /* 0x07 */
- U8 VP_ID; /* 0x08 */
- U8 VF_ID; /* 0x09 */
- U16 Reserved1; /* 0x0A */
- U16 FunctionDependent5; /* 0x0C */
- U16 IOCStatus; /* 0x0E */
- U32 IOCLogInfo; /* 0x10 */
-} MPI2_DEFAULT_REPLY, MPI2_POINTER PTR_MPI2_DEFAULT_REPLY,
- MPI2DefaultReply_t, MPI2_POINTER pMPI2DefaultReply_t;
-
-
-/* common version structure/union used in messages and configuration pages */
-
-typedef struct _MPI2_VERSION_STRUCT
-{
- U8 Dev; /* 0x00 */
- U8 Unit; /* 0x01 */
- U8 Minor; /* 0x02 */
- U8 Major; /* 0x03 */
-} MPI2_VERSION_STRUCT;
-
-typedef union _MPI2_VERSION_UNION
-{
- MPI2_VERSION_STRUCT Struct;
- U32 Word;
-} MPI2_VERSION_UNION;
-
-
-/* LUN field defines, common to many structures */
-#define MPI2_LUN_FIRST_LEVEL_ADDRESSING (0x0000FFFF)
-#define MPI2_LUN_SECOND_LEVEL_ADDRESSING (0xFFFF0000)
-#define MPI2_LUN_THIRD_LEVEL_ADDRESSING (0x0000FFFF)
-#define MPI2_LUN_FOURTH_LEVEL_ADDRESSING (0xFFFF0000)
-#define MPI2_LUN_LEVEL_1_WORD (0xFF00)
-#define MPI2_LUN_LEVEL_1_DWORD (0x0000FF00)
-
-
-/*****************************************************************************
-*
-* Fusion-MPT MPI Scatter Gather Elements
-*
-*****************************************************************************/
-
-/****************************************************************************
-* MPI Simple Element structures
-****************************************************************************/
-
-typedef struct _MPI2_SGE_SIMPLE32
-{
- U32 FlagsLength;
- U32 Address;
-} MPI2_SGE_SIMPLE32, MPI2_POINTER PTR_MPI2_SGE_SIMPLE32,
- Mpi2SGESimple32_t, MPI2_POINTER pMpi2SGESimple32_t;
-
-typedef struct _MPI2_SGE_SIMPLE64
-{
- U32 FlagsLength;
- U64 Address;
-} MPI2_SGE_SIMPLE64, MPI2_POINTER PTR_MPI2_SGE_SIMPLE64,
- Mpi2SGESimple64_t, MPI2_POINTER pMpi2SGESimple64_t;
-
-typedef struct _MPI2_SGE_SIMPLE_UNION
-{
- U32 FlagsLength;
- union
- {
- U32 Address32;
- U64 Address64;
- } u;
-} MPI2_SGE_SIMPLE_UNION, MPI2_POINTER PTR_MPI2_SGE_SIMPLE_UNION,
- Mpi2SGESimpleUnion_t, MPI2_POINTER pMpi2SGESimpleUnion_t;
-
-
-/****************************************************************************
-* MPI Chain Element structures
-****************************************************************************/
-
-typedef struct _MPI2_SGE_CHAIN32
-{
- U16 Length;
- U8 NextChainOffset;
- U8 Flags;
- U32 Address;
-} MPI2_SGE_CHAIN32, MPI2_POINTER PTR_MPI2_SGE_CHAIN32,
- Mpi2SGEChain32_t, MPI2_POINTER pMpi2SGEChain32_t;
-
-typedef struct _MPI2_SGE_CHAIN64
-{
- U16 Length;
- U8 NextChainOffset;
- U8 Flags;
- U64 Address;
-} MPI2_SGE_CHAIN64, MPI2_POINTER PTR_MPI2_SGE_CHAIN64,
- Mpi2SGEChain64_t, MPI2_POINTER pMpi2SGEChain64_t;
-
-typedef struct _MPI2_SGE_CHAIN_UNION
-{
- U16 Length;
- U8 NextChainOffset;
- U8 Flags;
- union
- {
- U32 Address32;
- U64 Address64;
- } u;
-} MPI2_SGE_CHAIN_UNION, MPI2_POINTER PTR_MPI2_SGE_CHAIN_UNION,
- Mpi2SGEChainUnion_t, MPI2_POINTER pMpi2SGEChainUnion_t;
-
-
-/****************************************************************************
-* MPI Transaction Context Element structures
-****************************************************************************/
-
-typedef struct _MPI2_SGE_TRANSACTION32
-{
- U8 Reserved;
- U8 ContextSize;
- U8 DetailsLength;
- U8 Flags;
- U32 TransactionContext[1];
- U32 TransactionDetails[1];
-} MPI2_SGE_TRANSACTION32, MPI2_POINTER PTR_MPI2_SGE_TRANSACTION32,
- Mpi2SGETransaction32_t, MPI2_POINTER pMpi2SGETransaction32_t;
-
-typedef struct _MPI2_SGE_TRANSACTION64
-{
- U8 Reserved;
- U8 ContextSize;
- U8 DetailsLength;
- U8 Flags;
- U32 TransactionContext[2];
- U32 TransactionDetails[1];
-} MPI2_SGE_TRANSACTION64, MPI2_POINTER PTR_MPI2_SGE_TRANSACTION64,
- Mpi2SGETransaction64_t, MPI2_POINTER pMpi2SGETransaction64_t;
-
-typedef struct _MPI2_SGE_TRANSACTION96
-{
- U8 Reserved;
- U8 ContextSize;
- U8 DetailsLength;
- U8 Flags;
- U32 TransactionContext[3];
- U32 TransactionDetails[1];
-} MPI2_SGE_TRANSACTION96, MPI2_POINTER PTR_MPI2_SGE_TRANSACTION96,
- Mpi2SGETransaction96_t, MPI2_POINTER pMpi2SGETransaction96_t;
-
-typedef struct _MPI2_SGE_TRANSACTION128
-{
- U8 Reserved;
- U8 ContextSize;
- U8 DetailsLength;
- U8 Flags;
- U32 TransactionContext[4];
- U32 TransactionDetails[1];
-} MPI2_SGE_TRANSACTION128, MPI2_POINTER PTR_MPI2_SGE_TRANSACTION128,
- Mpi2SGETransaction_t128, MPI2_POINTER pMpi2SGETransaction_t128;
-
-typedef struct _MPI2_SGE_TRANSACTION_UNION
-{
- U8 Reserved;
- U8 ContextSize;
- U8 DetailsLength;
- U8 Flags;
- union
- {
- U32 TransactionContext32[1];
- U32 TransactionContext64[2];
- U32 TransactionContext96[3];
- U32 TransactionContext128[4];
- } u;
- U32 TransactionDetails[1];
-} MPI2_SGE_TRANSACTION_UNION, MPI2_POINTER PTR_MPI2_SGE_TRANSACTION_UNION,
- Mpi2SGETransactionUnion_t, MPI2_POINTER pMpi2SGETransactionUnion_t;
-
-
-/****************************************************************************
-* MPI SGE union for IO SGL's
-****************************************************************************/
-
-typedef struct _MPI2_MPI_SGE_IO_UNION
-{
- union
- {
- MPI2_SGE_SIMPLE_UNION Simple;
- MPI2_SGE_CHAIN_UNION Chain;
- } u;
-} MPI2_MPI_SGE_IO_UNION, MPI2_POINTER PTR_MPI2_MPI_SGE_IO_UNION,
- Mpi2MpiSGEIOUnion_t, MPI2_POINTER pMpi2MpiSGEIOUnion_t;
-
-
-/****************************************************************************
-* MPI SGE union for SGL's with Simple and Transaction elements
-****************************************************************************/
-
-typedef struct _MPI2_SGE_TRANS_SIMPLE_UNION
-{
- union
- {
- MPI2_SGE_SIMPLE_UNION Simple;
- MPI2_SGE_TRANSACTION_UNION Transaction;
- } u;
-} MPI2_SGE_TRANS_SIMPLE_UNION, MPI2_POINTER PTR_MPI2_SGE_TRANS_SIMPLE_UNION,
- Mpi2SGETransSimpleUnion_t, MPI2_POINTER pMpi2SGETransSimpleUnion_t;
-
-
-/****************************************************************************
-* All MPI SGE types union
-****************************************************************************/
-
-typedef struct _MPI2_MPI_SGE_UNION
-{
- union
- {
- MPI2_SGE_SIMPLE_UNION Simple;
- MPI2_SGE_CHAIN_UNION Chain;
- MPI2_SGE_TRANSACTION_UNION Transaction;
- } u;
-} MPI2_MPI_SGE_UNION, MPI2_POINTER PTR_MPI2_MPI_SGE_UNION,
- Mpi2MpiSgeUnion_t, MPI2_POINTER pMpi2MpiSgeUnion_t;
-
-
-/****************************************************************************
-* MPI SGE field definition and masks
-****************************************************************************/
-
-/* Flags field bit definitions */
-
-#define MPI2_SGE_FLAGS_LAST_ELEMENT (0x80)
-#define MPI2_SGE_FLAGS_END_OF_BUFFER (0x40)
-#define MPI2_SGE_FLAGS_ELEMENT_TYPE_MASK (0x30)
-#define MPI2_SGE_FLAGS_LOCAL_ADDRESS (0x08)
-#define MPI2_SGE_FLAGS_DIRECTION (0x04)
-#define MPI2_SGE_FLAGS_ADDRESS_SIZE (0x02)
-#define MPI2_SGE_FLAGS_END_OF_LIST (0x01)
-
-#define MPI2_SGE_FLAGS_SHIFT (24)
-
-#define MPI2_SGE_LENGTH_MASK (0x00FFFFFF)
-#define MPI2_SGE_CHAIN_LENGTH_MASK (0x0000FFFF)
-
-/* Element Type */
-
-#define MPI2_SGE_FLAGS_TRANSACTION_ELEMENT (0x00)
-#define MPI2_SGE_FLAGS_SIMPLE_ELEMENT (0x10)
-#define MPI2_SGE_FLAGS_CHAIN_ELEMENT (0x30)
-#define MPI2_SGE_FLAGS_ELEMENT_MASK (0x30)
-
-/* Address location */
-
-#define MPI2_SGE_FLAGS_SYSTEM_ADDRESS (0x00)
-
-/* Direction */
-
-#define MPI2_SGE_FLAGS_IOC_TO_HOST (0x00)
-#define MPI2_SGE_FLAGS_HOST_TO_IOC (0x04)
-
-#define MPI2_SGE_FLAGS_DEST (MPI2_SGE_FLAGS_IOC_TO_HOST)
-#define MPI2_SGE_FLAGS_SOURCE (MPI2_SGE_FLAGS_HOST_TO_IOC)
-
-/* Address Size */
-
-#define MPI2_SGE_FLAGS_32_BIT_ADDRESSING (0x00)
-#define MPI2_SGE_FLAGS_64_BIT_ADDRESSING (0x02)
-
-/* Context Size */
-
-#define MPI2_SGE_FLAGS_32_BIT_CONTEXT (0x00)
-#define MPI2_SGE_FLAGS_64_BIT_CONTEXT (0x02)
-#define MPI2_SGE_FLAGS_96_BIT_CONTEXT (0x04)
-#define MPI2_SGE_FLAGS_128_BIT_CONTEXT (0x06)
-
-#define MPI2_SGE_CHAIN_OFFSET_MASK (0x00FF0000)
-#define MPI2_SGE_CHAIN_OFFSET_SHIFT (16)
-
-/****************************************************************************
-* MPI SGE operation Macros
-****************************************************************************/
-
-/* SIMPLE FlagsLength manipulations... */
-#define MPI2_SGE_SET_FLAGS(f) ((U32)(f) << MPI2_SGE_FLAGS_SHIFT)
-#define MPI2_SGE_GET_FLAGS(f) (((f) & ~MPI2_SGE_LENGTH_MASK) >> MPI2_SGE_FLAGS_SHIFT)
-#define MPI2_SGE_LENGTH(f) ((f) & MPI2_SGE_LENGTH_MASK)
-#define MPI2_SGE_CHAIN_LENGTH(f) ((f) & MPI2_SGE_CHAIN_LENGTH_MASK)
-
-#define MPI2_SGE_SET_FLAGS_LENGTH(f,l) (MPI2_SGE_SET_FLAGS(f) | MPI2_SGE_LENGTH(l))
-
-#define MPI2_pSGE_GET_FLAGS(psg) MPI2_SGE_GET_FLAGS((psg)->FlagsLength)
-#define MPI2_pSGE_GET_LENGTH(psg) MPI2_SGE_LENGTH((psg)->FlagsLength)
-#define MPI2_pSGE_SET_FLAGS_LENGTH(psg,f,l) (psg)->FlagsLength = MPI2_SGE_SET_FLAGS_LENGTH(f,l)
-
-/* CAUTION - The following are READ-MODIFY-WRITE! */
-#define MPI2_pSGE_SET_FLAGS(psg,f) (psg)->FlagsLength |= MPI2_SGE_SET_FLAGS(f)
-#define MPI2_pSGE_SET_LENGTH(psg,l) (psg)->FlagsLength |= MPI2_SGE_LENGTH(l)
-
-#define MPI2_GET_CHAIN_OFFSET(x) ((x & MPI2_SGE_CHAIN_OFFSET_MASK) >> MPI2_SGE_CHAIN_OFFSET_SHIFT)
-
-
-/*****************************************************************************
-*
-* Fusion-MPT IEEE Scatter Gather Elements
-*
-*****************************************************************************/
-
-/****************************************************************************
-* IEEE Simple Element structures
-****************************************************************************/
-
-typedef struct _MPI2_IEEE_SGE_SIMPLE32
-{
- U32 Address;
- U32 FlagsLength;
-} MPI2_IEEE_SGE_SIMPLE32, MPI2_POINTER PTR_MPI2_IEEE_SGE_SIMPLE32,
- Mpi2IeeeSgeSimple32_t, MPI2_POINTER pMpi2IeeeSgeSimple32_t;
-
-typedef struct _MPI2_IEEE_SGE_SIMPLE64
-{
- U64 Address;
- U32 Length;
- U16 Reserved1;
- U8 Reserved2;
- U8 Flags;
-} MPI2_IEEE_SGE_SIMPLE64, MPI2_POINTER PTR_MPI2_IEEE_SGE_SIMPLE64,
- Mpi2IeeeSgeSimple64_t, MPI2_POINTER pMpi2IeeeSgeSimple64_t;
-
-typedef union _MPI2_IEEE_SGE_SIMPLE_UNION
-{
- MPI2_IEEE_SGE_SIMPLE32 Simple32;
- MPI2_IEEE_SGE_SIMPLE64 Simple64;
-} MPI2_IEEE_SGE_SIMPLE_UNION, MPI2_POINTER PTR_MPI2_IEEE_SGE_SIMPLE_UNION,
- Mpi2IeeeSgeSimpleUnion_t, MPI2_POINTER pMpi2IeeeSgeSimpleUnion_t;
-
-
-/****************************************************************************
-* IEEE Chain Element structures
-****************************************************************************/
-
-typedef MPI2_IEEE_SGE_SIMPLE32 MPI2_IEEE_SGE_CHAIN32;
-
-typedef MPI2_IEEE_SGE_SIMPLE64 MPI2_IEEE_SGE_CHAIN64;
-
-typedef union _MPI2_IEEE_SGE_CHAIN_UNION
-{
- MPI2_IEEE_SGE_CHAIN32 Chain32;
- MPI2_IEEE_SGE_CHAIN64 Chain64;
-} MPI2_IEEE_SGE_CHAIN_UNION, MPI2_POINTER PTR_MPI2_IEEE_SGE_CHAIN_UNION,
- Mpi2IeeeSgeChainUnion_t, MPI2_POINTER pMpi2IeeeSgeChainUnion_t;
-
-
-/****************************************************************************
-* All IEEE SGE types union
-****************************************************************************/
-
-typedef struct _MPI2_IEEE_SGE_UNION
-{
- union
- {
- MPI2_IEEE_SGE_SIMPLE_UNION Simple;
- MPI2_IEEE_SGE_CHAIN_UNION Chain;
- } u;
-} MPI2_IEEE_SGE_UNION, MPI2_POINTER PTR_MPI2_IEEE_SGE_UNION,
- Mpi2IeeeSgeUnion_t, MPI2_POINTER pMpi2IeeeSgeUnion_t;
-
-
-/****************************************************************************
-* IEEE SGE field definitions and masks
-****************************************************************************/
-
-/* Flags field bit definitions */
-
-#define MPI2_IEEE_SGE_FLAGS_ELEMENT_TYPE_MASK (0x80)
-
-#define MPI2_IEEE32_SGE_FLAGS_SHIFT (24)
-
-#define MPI2_IEEE32_SGE_LENGTH_MASK (0x00FFFFFF)
-
-/* Element Type */
-
-#define MPI2_IEEE_SGE_FLAGS_SIMPLE_ELEMENT (0x00)
-#define MPI2_IEEE_SGE_FLAGS_CHAIN_ELEMENT (0x80)
-
-/* Data Location Address Space */
-
-#define MPI2_IEEE_SGE_FLAGS_ADDR_MASK (0x03)
-#define MPI2_IEEE_SGE_FLAGS_SYSTEM_ADDR (0x00)
- /* IEEE Simple Element only */
-#define MPI2_IEEE_SGE_FLAGS_IOCDDR_ADDR (0x01)
- /* IEEE Simple Element only */
-#define MPI2_IEEE_SGE_FLAGS_IOCPLB_ADDR (0x02)
-#define MPI2_IEEE_SGE_FLAGS_IOCPLBNTA_ADDR (0x03)
- /* IEEE Simple Element only */
-#define MPI2_IEEE_SGE_FLAGS_SYSTEMPLBPCI_ADDR (0x03)
- /* IEEE Chain Element only */
-#define MPI2_IEEE_SGE_FLAGS_SYSTEMPLBCPI_ADDR \
- (MPI2_IEEE_SGE_FLAGS_SYSTEMPLBPCI_ADDR) /* typo in name */
-
-/****************************************************************************
-* IEEE SGE operation Macros
-****************************************************************************/
-
-/* SIMPLE FlagsLength manipulations... */
-#define MPI2_IEEE32_SGE_SET_FLAGS(f) ((U32)(f) << MPI2_IEEE32_SGE_FLAGS_SHIFT)
-#define MPI2_IEEE32_SGE_GET_FLAGS(f) (((f) & ~MPI2_IEEE32_SGE_LENGTH_MASK) >> MPI2_IEEE32_SGE_FLAGS_SHIFT)
-#define MPI2_IEEE32_SGE_LENGTH(f) ((f) & MPI2_IEEE32_SGE_LENGTH_MASK)
-
-#define MPI2_IEEE32_SGE_SET_FLAGS_LENGTH(f, l) (MPI2_IEEE32_SGE_SET_FLAGS(f) | MPI2_IEEE32_SGE_LENGTH(l))
-
-#define MPI2_IEEE32_pSGE_GET_FLAGS(psg) MPI2_IEEE32_SGE_GET_FLAGS((psg)->FlagsLength)
-#define MPI2_IEEE32_pSGE_GET_LENGTH(psg) MPI2_IEEE32_SGE_LENGTH((psg)->FlagsLength)
-#define MPI2_IEEE32_pSGE_SET_FLAGS_LENGTH(psg,f,l) (psg)->FlagsLength = MPI2_IEEE32_SGE_SET_FLAGS_LENGTH(f,l)
-
-/* CAUTION - The following are READ-MODIFY-WRITE! */
-#define MPI2_IEEE32_pSGE_SET_FLAGS(psg,f) (psg)->FlagsLength |= MPI2_IEEE32_SGE_SET_FLAGS(f)
-#define MPI2_IEEE32_pSGE_SET_LENGTH(psg,l) (psg)->FlagsLength |= MPI2_IEEE32_SGE_LENGTH(l)
-
-
-
-
-/*****************************************************************************
-*
-* Fusion-MPT MPI/IEEE Scatter Gather Unions
-*
-*****************************************************************************/
-
-typedef union _MPI2_SIMPLE_SGE_UNION
-{
- MPI2_SGE_SIMPLE_UNION MpiSimple;
- MPI2_IEEE_SGE_SIMPLE_UNION IeeeSimple;
-} MPI2_SIMPLE_SGE_UNION, MPI2_POINTER PTR_MPI2_SIMPLE_SGE_UNION,
- Mpi2SimpleSgeUntion_t, MPI2_POINTER pMpi2SimpleSgeUntion_t;
-
-
-typedef union _MPI2_SGE_IO_UNION
-{
- MPI2_SGE_SIMPLE_UNION MpiSimple;
- MPI2_SGE_CHAIN_UNION MpiChain;
- MPI2_IEEE_SGE_SIMPLE_UNION IeeeSimple;
- MPI2_IEEE_SGE_CHAIN_UNION IeeeChain;
-} MPI2_SGE_IO_UNION, MPI2_POINTER PTR_MPI2_SGE_IO_UNION,
- Mpi2SGEIOUnion_t, MPI2_POINTER pMpi2SGEIOUnion_t;
-
-
-/****************************************************************************
-*
-* Values for SGLFlags field, used in many request messages with an SGL
-*
-****************************************************************************/
-
-/* values for MPI SGL Data Location Address Space subfield */
-#define MPI2_SGLFLAGS_ADDRESS_SPACE_MASK (0x0C)
-#define MPI2_SGLFLAGS_SYSTEM_ADDRESS_SPACE (0x00)
-#define MPI2_SGLFLAGS_IOCDDR_ADDRESS_SPACE (0x04)
-#define MPI2_SGLFLAGS_IOCPLB_ADDRESS_SPACE (0x08)
-#define MPI2_SGLFLAGS_IOCPLBNTA_ADDRESS_SPACE (0x0C)
-/* values for SGL Type subfield */
-#define MPI2_SGLFLAGS_SGL_TYPE_MASK (0x03)
-#define MPI2_SGLFLAGS_SGL_TYPE_MPI (0x00)
-#define MPI2_SGLFLAGS_SGL_TYPE_IEEE32 (0x01)
-#define MPI2_SGLFLAGS_SGL_TYPE_IEEE64 (0x02)
-
-
-#endif
-
deleted file mode 100644
@@ -1,3068 +0,0 @@
-/*
- * Copyright (c) 2000-2014 LSI Corporation.
- *
- *
- * Name: mpi2_cnfg.h
- * Title: MPI Configuration messages and pages
- * Creation Date: November 10, 2006
- *
- * mpi2_cnfg.h Version: 02.00.29
- *
- * Version History
- * ---------------
- *
- * Date Version Description
- * -------- -------- ------------------------------------------------------
- * 04-30-07 02.00.00 Corresponds to Fusion-MPT MPI Specification Rev A.
- * 06-04-07 02.00.01 Added defines for SAS IO Unit Page 2 PhyFlags.
- * Added Manufacturing Page 11.
- * Added MPI2_SAS_EXPANDER0_FLAGS_CONNECTOR_END_DEVICE
- * define.
- * 06-26-07 02.00.02 Adding generic structure for product-specific
- * Manufacturing pages: MPI2_CONFIG_PAGE_MANUFACTURING_PS.
- * Rework of BIOS Page 2 configuration page.
- * Fixed MPI2_BIOSPAGE2_BOOT_DEVICE to be a union of the
- * forms.
- * Added configuration pages IOC Page 8 and Driver
- * Persistent Mapping Page 0.
- * 08-31-07 02.00.03 Modified configuration pages dealing with Integrated
- * RAID (Manufacturing Page 4, RAID Volume Pages 0 and 1,
- * RAID Physical Disk Pages 0 and 1, RAID Configuration
- * Page 0).
- * Added new value for AccessStatus field of SAS Device
- * Page 0 (_SATA_NEEDS_INITIALIZATION).
- * 10-31-07 02.00.04 Added missing SEPDevHandle field to
- * MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0.
- * 12-18-07 02.00.05 Modified IO Unit Page 0 to use 32-bit version fields for
- * NVDATA.
- * Modified IOC Page 7 to use masks and added field for
- * SASBroadcastPrimitiveMasks.
- * Added MPI2_CONFIG_PAGE_BIOS_4.
- * Added MPI2_CONFIG_PAGE_LOG_0.
- * 02-29-08 02.00.06 Modified various names to make them 32-character unique.
- * Added SAS Device IDs.
- * Updated Integrated RAID configuration pages including
- * Manufacturing Page 4, IOC Page 6, and RAID Configuration
- * Page 0.
- * 05-21-08 02.00.07 Added define MPI2_MANPAGE4_MIX_SSD_SAS_SATA.
- * Added define MPI2_MANPAGE4_PHYSDISK_128MB_COERCION.
- * Fixed define MPI2_IOCPAGE8_FLAGS_ENCLOSURE_SLOT_MAPPING.
- * Added missing MaxNumRoutedSasAddresses field to
- * MPI2_CONFIG_PAGE_EXPANDER_0.
- * Added SAS Port Page 0.
- * Modified structure layout for
- * MPI2_CONFIG_PAGE_DRIVER_MAPPING_0.
- * 06-27-08 02.00.08 Changed MPI2_CONFIG_PAGE_RD_PDISK_1 to use
- * MPI2_RAID_PHYS_DISK1_PATH_MAX to size the array.
- * 10-02-08 02.00.09 Changed MPI2_RAID_PGAD_CONFIGNUM_MASK from 0x0000FFFF
- * to 0x000000FF.
- * Added two new values for the Physical Disk Coercion Size
- * bits in the Flags field of Manufacturing Page 4.
- * Added product-specific Manufacturing pages 16 to 31.
- * Modified Flags bits for controlling write cache on SATA
- * drives in IO Unit Page 1.
- * Added new bit to AdditionalControlFlags of SAS IO Unit
- * Page 1 to control Invalid Topology Correction.
- * Added additional defines for RAID Volume Page 0
- * VolumeStatusFlags field.
- * Modified meaning of RAID Volume Page 0 VolumeSettings
- * define for auto-configure of hot-swap drives.
- * Added SupportedPhysDisks field to RAID Volume Page 1 and
- * added related defines.
- * Added PhysDiskAttributes field (and related defines) to
- * RAID Physical Disk Page 0.
- * Added MPI2_SAS_PHYINFO_PHY_VACANT define.
- * Added three new DiscoveryStatus bits for SAS IO Unit
- * Page 0 and SAS Expander Page 0.
- * Removed multiplexing information from SAS IO Unit pages.
- * Added BootDeviceWaitTime field to SAS IO Unit Page 4.
- * Removed Zone Address Resolved bit from PhyInfo and from
- * Expander Page 0 Flags field.
- * Added two new AccessStatus values to SAS Device Page 0
- * for indicating routing problems. Added 3 reserved words
- * to this page.
- * 01-19-09 02.00.10 Fixed defines for GPIOVal field of IO Unit Page 3.
- * Inserted missing reserved field into structure for IOC
- * Page 6.
- * Added more pending task bits to RAID Volume Page 0
- * VolumeStatusFlags defines.
- * Added MPI2_PHYSDISK0_STATUS_FLAG_NOT_CERTIFIED define.
- * Added a new DiscoveryStatus bit for SAS IO Unit Page 0
- * and SAS Expander Page 0 to flag a downstream initiator
- * when in simplified routing mode.
- * Removed SATA Init Failure defines for DiscoveryStatus
- * fields of SAS IO Unit Page 0 and SAS Expander Page 0.
- * Added MPI2_SAS_DEVICE0_ASTATUS_DEVICE_BLOCKED define.
- * Added PortGroups, DmaGroup, and ControlGroup fields to
- * SAS Device Page 0.
- * 05-06-09 02.00.11 Added structures and defines for IO Unit Page 5 and IO
- * Unit Page 6.
- * Added expander reduced functionality data to SAS
- * Expander Page 0.
- * Added SAS PHY Page 2 and SAS PHY Page 3.
- * 07-30-09 02.00.12 Added IO Unit Page 7.
- * Added new device ids.
- * Added SAS IO Unit Page 5.
- * Added partial and slumber power management capable flags
- * to SAS Device Page 0 Flags field.
- * Added PhyInfo defines for power condition.
- * Added Ethernet configuration pages.
- * 10-28-09 02.00.13 Added MPI2_IOUNITPAGE1_ENABLE_HOST_BASED_DISCOVERY.
- * Added SAS PHY Page 4 structure and defines.
- * 02-10-10 02.00.14 Modified the comments for the configuration page
- * structures that contain an array of data. The host
- * should use the "count" field in the page data (e.g. the
- * NumPhys field) to determine the number of valid elements
- * in the array.
- * Added/modified some MPI2_MFGPAGE_DEVID_SAS defines.
- * Added PowerManagementCapabilities to IO Unit Page 7.
- * Added PortWidthModGroup field to
- * MPI2_SAS_IO_UNIT5_PHY_PM_SETTINGS.
- * Added MPI2_CONFIG_PAGE_SASIOUNIT_6 and related defines.
- * Added MPI2_CONFIG_PAGE_SASIOUNIT_7 and related defines.
- * Added MPI2_CONFIG_PAGE_SASIOUNIT_8 and related defines.
- * 05-12-10 02.00.15 Added MPI2_RAIDVOL0_STATUS_FLAG_VOL_NOT_CONSISTENT
- * define.
- * Added MPI2_PHYSDISK0_INCOMPATIBLE_MEDIA_TYPE define.
- * Added MPI2_SAS_NEG_LINK_RATE_UNSUPPORTED_PHY define.
- * 08-11-10 02.00.16 Removed IO Unit Page 1 device path (multi-pathing)
- * defines.
- * 11-10-10 02.00.17 Added ReceptacleID field (replacing Reserved1) to
- * MPI2_MANPAGE7_CONNECTOR_INFO and reworked defines for
- * the Pinout field.
- * Added BoardTemperature and BoardTemperatureUnits fields
- * to MPI2_CONFIG_PAGE_IO_UNIT_7.
- * Added MPI2_CONFIG_EXTPAGETYPE_EXT_MANUFACTURING define
- * and MPI2_CONFIG_PAGE_EXT_MAN_PS structure.
- * 02-23-11 02.00.18 Added ProxyVF_ID field to MPI2_CONFIG_REQUEST.
- * Added IO Unit Page 8, IO Unit Page 9,
- * and IO Unit Page 10.
- * Added SASNotifyPrimitiveMasks field to
- * MPI2_CONFIG_PAGE_IOC_7.
- * 03-09-11 02.00.19 Fixed IO Unit Page 10 (to match the spec).
- * 05-25-11 02.00.20 Cleaned up a few comments.
- * 08-24-11 02.00.21 Marked the IO Unit Page 7 PowerManagementCapabilities
- * for PCIe link as obsolete.
- * Added SpinupFlags field containing a Disable Spin-up
- * bit to the MPI2_SAS_IOUNIT4_SPINUP_GROUP fields of
- * SAS IO Unit Page 4.
- * 11-18-11 02.00.22 Added define MPI2_IOCPAGE6_CAP_FLAGS_4K_SECTORS_SUPPORT.
- * Added UEFIVersion field to BIOS Page 1 and defined new
- * BiosOptions bits.
- * 11-27-12 02.00.23 Added MPI2_MANPAGE7_FLAG_EVENTREPLAY_SLOT_ORDER.
- * Added MPI2_BIOSPAGE1_OPTIONS_MASK_OEM_ID.
- * 12-20-12 02.00.24 Marked MPI2_SASIOUNIT1_CONTROL_CLEAR_AFFILIATION as
- * obsolete for MPI v2.5 and later.
- * Added some defines for 12G SAS speeds.
- * 04-09-13 02.00.25 Added MPI2_IOUNITPAGE1_ATA_SECURITY_FREEZE_LOCK.
- * Fixed MPI2_IOUNITPAGE5_DMA_CAP_MASK_MAX_REQUESTS to
- * match the specification.
- * 12-05-13 02.00.27 Added MPI2_MANPAGE7_FLAG_BASE_ENCLOSURE_LEVEL for
- * MPI2_CONFIG_PAGE_MAN_7.
- * Added EnclosureLevel and ConnectorName fields to
- * MPI2_CONFIG_PAGE_SAS_DEV_0.
- * Added MPI2_SAS_DEVICE0_FLAGS_ENCL_LEVEL_VALID for
- * MPI2_CONFIG_PAGE_SAS_DEV_0.
- * Added EnclosureLevel field to
- * MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0.
- * Added MPI2_SAS_ENCLS0_FLAGS_ENCL_LEVEL_VALID for
- * MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0.
- * 01-08-14 02.00.28 Added more defines for the BiosOptions field of
- * MPI2_CONFIG_PAGE_BIOS_1.
- * 06-13-14 02.00.29 Added SSUTimeout field to MPI2_CONFIG_PAGE_BIOS_1, and
- * more defines for the BiosOptions field.
- * --------------------------------------------------------------------------
- */
-
-#ifndef MPI2_CNFG_H
-#define MPI2_CNFG_H
-
-/*****************************************************************************
-* Configuration Page Header and defines
-*****************************************************************************/
-
-/* Config Page Header */
-typedef struct _MPI2_CONFIG_PAGE_HEADER
-{
- U8 PageVersion; /* 0x00 */
- U8 PageLength; /* 0x01 */
- U8 PageNumber; /* 0x02 */
- U8 PageType; /* 0x03 */
-} MPI2_CONFIG_PAGE_HEADER, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_HEADER,
- Mpi2ConfigPageHeader_t, MPI2_POINTER pMpi2ConfigPageHeader_t;
-
-typedef union _MPI2_CONFIG_PAGE_HEADER_UNION
-{
- MPI2_CONFIG_PAGE_HEADER Struct;
- U8 Bytes[4];
- U16 Word16[2];
- U32 Word32;
-} MPI2_CONFIG_PAGE_HEADER_UNION, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_HEADER_UNION,
- Mpi2ConfigPageHeaderUnion, MPI2_POINTER pMpi2ConfigPageHeaderUnion;
-
-/* Extended Config Page Header */
-typedef struct _MPI2_CONFIG_EXTENDED_PAGE_HEADER
-{
- U8 PageVersion; /* 0x00 */
- U8 Reserved1; /* 0x01 */
- U8 PageNumber; /* 0x02 */
- U8 PageType; /* 0x03 */
- U16 ExtPageLength; /* 0x04 */
- U8 ExtPageType; /* 0x06 */
- U8 Reserved2; /* 0x07 */
-} MPI2_CONFIG_EXTENDED_PAGE_HEADER,
- MPI2_POINTER PTR_MPI2_CONFIG_EXTENDED_PAGE_HEADER,
- Mpi2ConfigExtendedPageHeader_t, MPI2_POINTER pMpi2ConfigExtendedPageHeader_t;
-
-typedef union _MPI2_CONFIG_EXT_PAGE_HEADER_UNION
-{
- MPI2_CONFIG_PAGE_HEADER Struct;
- MPI2_CONFIG_EXTENDED_PAGE_HEADER Ext;
- U8 Bytes[8];
- U16 Word16[4];
- U32 Word32[2];
-} MPI2_CONFIG_EXT_PAGE_HEADER_UNION, MPI2_POINTER PTR_MPI2_CONFIG_EXT_PAGE_HEADER_UNION,
- Mpi2ConfigPageExtendedHeaderUnion, MPI2_POINTER pMpi2ConfigPageExtendedHeaderUnion;
-
-
-/* PageType field values */
-#define MPI2_CONFIG_PAGEATTR_READ_ONLY (0x00)
-#define MPI2_CONFIG_PAGEATTR_CHANGEABLE (0x10)
-#define MPI2_CONFIG_PAGEATTR_PERSISTENT (0x20)
-#define MPI2_CONFIG_PAGEATTR_MASK (0xF0)
-
-#define MPI2_CONFIG_PAGETYPE_IO_UNIT (0x00)
-#define MPI2_CONFIG_PAGETYPE_IOC (0x01)
-#define MPI2_CONFIG_PAGETYPE_BIOS (0x02)
-#define MPI2_CONFIG_PAGETYPE_RAID_VOLUME (0x08)
-#define MPI2_CONFIG_PAGETYPE_MANUFACTURING (0x09)
-#define MPI2_CONFIG_PAGETYPE_RAID_PHYSDISK (0x0A)
-#define MPI2_CONFIG_PAGETYPE_EXTENDED (0x0F)
-#define MPI2_CONFIG_PAGETYPE_MASK (0x0F)
-
-#define MPI2_CONFIG_TYPENUM_MASK (0x0FFF)
-
-
-/* ExtPageType field values */
-#define MPI2_CONFIG_EXTPAGETYPE_SAS_IO_UNIT (0x10)
-#define MPI2_CONFIG_EXTPAGETYPE_SAS_EXPANDER (0x11)
-#define MPI2_CONFIG_EXTPAGETYPE_SAS_DEVICE (0x12)
-#define MPI2_CONFIG_EXTPAGETYPE_SAS_PHY (0x13)
-#define MPI2_CONFIG_EXTPAGETYPE_LOG (0x14)
-#define MPI2_CONFIG_EXTPAGETYPE_ENCLOSURE (0x15)
-#define MPI2_CONFIG_EXTPAGETYPE_RAID_CONFIG (0x16)
-#define MPI2_CONFIG_EXTPAGETYPE_DRIVER_MAPPING (0x17)
-#define MPI2_CONFIG_EXTPAGETYPE_SAS_PORT (0x18)
-#define MPI2_CONFIG_EXTPAGETYPE_ETHERNET (0x19)
-#define MPI2_CONFIG_EXTPAGETYPE_EXT_MANUFACTURING (0x1A)
-
-
-/*****************************************************************************
-* PageAddress defines
-*****************************************************************************/
-
-/* RAID Volume PageAddress format */
-#define MPI2_RAID_VOLUME_PGAD_FORM_MASK (0xF0000000)
-#define MPI2_RAID_VOLUME_PGAD_FORM_GET_NEXT_HANDLE (0x00000000)
-#define MPI2_RAID_VOLUME_PGAD_FORM_HANDLE (0x10000000)
-
-#define MPI2_RAID_VOLUME_PGAD_HANDLE_MASK (0x0000FFFF)
-
-
-/* RAID Physical Disk PageAddress format */
-#define MPI2_PHYSDISK_PGAD_FORM_MASK (0xF0000000)
-#define MPI2_PHYSDISK_PGAD_FORM_GET_NEXT_PHYSDISKNUM (0x00000000)
-#define MPI2_PHYSDISK_PGAD_FORM_PHYSDISKNUM (0x10000000)
-#define MPI2_PHYSDISK_PGAD_FORM_DEVHANDLE (0x20000000)
-
-#define MPI2_PHYSDISK_PGAD_PHYSDISKNUM_MASK (0x000000FF)
-#define MPI2_PHYSDISK_PGAD_DEVHANDLE_MASK (0x0000FFFF)
-
-
-/* SAS Expander PageAddress format */
-#define MPI2_SAS_EXPAND_PGAD_FORM_MASK (0xF0000000)
-#define MPI2_SAS_EXPAND_PGAD_FORM_GET_NEXT_HNDL (0x00000000)
-#define MPI2_SAS_EXPAND_PGAD_FORM_HNDL_PHY_NUM (0x10000000)
-#define MPI2_SAS_EXPAND_PGAD_FORM_HNDL (0x20000000)
-
-#define MPI2_SAS_EXPAND_PGAD_HANDLE_MASK (0x0000FFFF)
-#define MPI2_SAS_EXPAND_PGAD_PHYNUM_MASK (0x00FF0000)
-#define MPI2_SAS_EXPAND_PGAD_PHYNUM_SHIFT (16)
-
-
-/* SAS Device PageAddress format */
-#define MPI2_SAS_DEVICE_PGAD_FORM_MASK (0xF0000000)
-#define MPI2_SAS_DEVICE_PGAD_FORM_GET_NEXT_HANDLE (0x00000000)
-#define MPI2_SAS_DEVICE_PGAD_FORM_HANDLE (0x20000000)
-
-#define MPI2_SAS_DEVICE_PGAD_HANDLE_MASK (0x0000FFFF)
-
-
-/* SAS PHY PageAddress format */
-#define MPI2_SAS_PHY_PGAD_FORM_MASK (0xF0000000)
-#define MPI2_SAS_PHY_PGAD_FORM_PHY_NUMBER (0x00000000)
-#define MPI2_SAS_PHY_PGAD_FORM_PHY_TBL_INDEX (0x10000000)
-
-#define MPI2_SAS_PHY_PGAD_PHY_NUMBER_MASK (0x000000FF)
-#define MPI2_SAS_PHY_PGAD_PHY_TBL_INDEX_MASK (0x0000FFFF)
-
-
-/* SAS Port PageAddress format */
-#define MPI2_SASPORT_PGAD_FORM_MASK (0xF0000000)
-#define MPI2_SASPORT_PGAD_FORM_GET_NEXT_PORT (0x00000000)
-#define MPI2_SASPORT_PGAD_FORM_PORT_NUM (0x10000000)
-
-#define MPI2_SASPORT_PGAD_PORTNUMBER_MASK (0x00000FFF)
-
-
-/* SAS Enclosure PageAddress format */
-#define MPI2_SAS_ENCLOS_PGAD_FORM_MASK (0xF0000000)
-#define MPI2_SAS_ENCLOS_PGAD_FORM_GET_NEXT_HANDLE (0x00000000)
-#define MPI2_SAS_ENCLOS_PGAD_FORM_HANDLE (0x10000000)
-
-#define MPI2_SAS_ENCLOS_PGAD_HANDLE_MASK (0x0000FFFF)
-
-
-/* RAID Configuration PageAddress format */
-#define MPI2_RAID_PGAD_FORM_MASK (0xF0000000)
-#define MPI2_RAID_PGAD_FORM_GET_NEXT_CONFIGNUM (0x00000000)
-#define MPI2_RAID_PGAD_FORM_CONFIGNUM (0x10000000)
-#define MPI2_RAID_PGAD_FORM_ACTIVE_CONFIG (0x20000000)
-
-#define MPI2_RAID_PGAD_CONFIGNUM_MASK (0x000000FF)
-
-
-/* Driver Persistent Mapping PageAddress format */
-#define MPI2_DPM_PGAD_FORM_MASK (0xF0000000)
-#define MPI2_DPM_PGAD_FORM_ENTRY_RANGE (0x00000000)
-
-#define MPI2_DPM_PGAD_ENTRY_COUNT_MASK (0x0FFF0000)
-#define MPI2_DPM_PGAD_ENTRY_COUNT_SHIFT (16)
-#define MPI2_DPM_PGAD_START_ENTRY_MASK (0x0000FFFF)
-
-
-/* Ethernet PageAddress format */
-#define MPI2_ETHERNET_PGAD_FORM_MASK (0xF0000000)
-#define MPI2_ETHERNET_PGAD_FORM_IF_NUM (0x00000000)
-
-#define MPI2_ETHERNET_PGAD_IF_NUMBER_MASK (0x000000FF)
-
-
-
-/****************************************************************************
-* Configuration messages
-****************************************************************************/
-
-/* Configuration Request Message */
-typedef struct _MPI2_CONFIG_REQUEST
-{
- U8 Action; /* 0x00 */
- U8 SGLFlags; /* 0x01 */
- U8 ChainOffset; /* 0x02 */
- U8 Function; /* 0x03 */
- U16 ExtPageLength; /* 0x04 */
- U8 ExtPageType; /* 0x06 */
- U8 MsgFlags; /* 0x07 */
- U8 VP_ID; /* 0x08 */
- U8 VF_ID; /* 0x09 */
- U16 Reserved1; /* 0x0A */
- U8 Reserved2; /* 0x0C */
- U8 ProxyVF_ID; /* 0x0D */
- U16 Reserved4; /* 0x0E */
- U32 Reserved3; /* 0x10 */
- MPI2_CONFIG_PAGE_HEADER Header; /* 0x14 */
- U32 PageAddress; /* 0x18 */
- MPI2_SGE_IO_UNION PageBufferSGE; /* 0x1C */
-} MPI2_CONFIG_REQUEST, MPI2_POINTER PTR_MPI2_CONFIG_REQUEST,
- Mpi2ConfigRequest_t, MPI2_POINTER pMpi2ConfigRequest_t;
-
-/* values for the Action field */
-#define MPI2_CONFIG_ACTION_PAGE_HEADER (0x00)
-#define MPI2_CONFIG_ACTION_PAGE_READ_CURRENT (0x01)
-#define MPI2_CONFIG_ACTION_PAGE_WRITE_CURRENT (0x02)
-#define MPI2_CONFIG_ACTION_PAGE_DEFAULT (0x03)
-#define MPI2_CONFIG_ACTION_PAGE_WRITE_NVRAM (0x04)
-#define MPI2_CONFIG_ACTION_PAGE_READ_DEFAULT (0x05)
-#define MPI2_CONFIG_ACTION_PAGE_READ_NVRAM (0x06)
-#define MPI2_CONFIG_ACTION_PAGE_GET_CHANGEABLE (0x07)
-
-/* use MPI2_SGLFLAGS_ defines from mpi2.h for the SGLFlags field */
-
-
-/* Config Reply Message */
-typedef struct _MPI2_CONFIG_REPLY
-{
- U8 Action; /* 0x00 */
- U8 SGLFlags; /* 0x01 */
- U8 MsgLength; /* 0x02 */
- U8 Function; /* 0x03 */
- U16 ExtPageLength; /* 0x04 */
- U8 ExtPageType; /* 0x06 */
- U8 MsgFlags; /* 0x07 */
- U8 VP_ID; /* 0x08 */
- U8 VF_ID; /* 0x09 */
- U16 Reserved1; /* 0x0A */
- U16 Reserved2; /* 0x0C */
- U16 IOCStatus; /* 0x0E */
- U32 IOCLogInfo; /* 0x10 */
- MPI2_CONFIG_PAGE_HEADER Header; /* 0x14 */
-} MPI2_CONFIG_REPLY, MPI2_POINTER PTR_MPI2_CONFIG_REPLY,
- Mpi2ConfigReply_t, MPI2_POINTER pMpi2ConfigReply_t;
-
-
-
-/*****************************************************************************
-*
-* C o n f i g u r a t i o n P a g e s
-*
-*****************************************************************************/
-
-/****************************************************************************
-* Manufacturing Config pages
-****************************************************************************/
-
-#define MPI2_MFGPAGE_VENDORID_LSI (0x1000)
-
-/* SAS */
-#define MPI2_MFGPAGE_DEVID_SAS2004 (0x0070)
-#define MPI2_MFGPAGE_DEVID_SAS2008 (0x0072)
-#define MPI2_MFGPAGE_DEVID_SAS2108_1 (0x0074)
-#define MPI2_MFGPAGE_DEVID_SAS2108_2 (0x0076)
-#define MPI2_MFGPAGE_DEVID_SAS2108_3 (0x0077)
-#define MPI2_MFGPAGE_DEVID_SAS2116_1 (0x0064)
-#define MPI2_MFGPAGE_DEVID_SAS2116_2 (0x0065)
-
-#define MPI2_MFGPAGE_DEVID_SSS6200 (0x007E)
-
-#define MPI2_MFGPAGE_DEVID_SAS2208_1 (0x0080)
-#define MPI2_MFGPAGE_DEVID_SAS2208_2 (0x0081)
-#define MPI2_MFGPAGE_DEVID_SAS2208_3 (0x0082)
-#define MPI2_MFGPAGE_DEVID_SAS2208_4 (0x0083)
-#define MPI2_MFGPAGE_DEVID_SAS2208_5 (0x0084)
-#define MPI2_MFGPAGE_DEVID_SAS2208_6 (0x0085)
-#define MPI2_MFGPAGE_DEVID_SAS2308_1 (0x0086)
-#define MPI2_MFGPAGE_DEVID_SAS2308_2 (0x0087)
-#define MPI2_MFGPAGE_DEVID_SAS2308_3 (0x006E)
-
-
-
-
-/* Manufacturing Page 0 */
-
-typedef struct _MPI2_CONFIG_PAGE_MAN_0
-{
- MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */
- U8 ChipName[16]; /* 0x04 */
- U8 ChipRevision[8]; /* 0x14 */
- U8 BoardName[16]; /* 0x1C */
- U8 BoardAssembly[16]; /* 0x2C */
- U8 BoardTracerNumber[16]; /* 0x3C */
-} MPI2_CONFIG_PAGE_MAN_0,
- MPI2_POINTER PTR_MPI2_CONFIG_PAGE_MAN_0,
- Mpi2ManufacturingPage0_t, MPI2_POINTER pMpi2ManufacturingPage0_t;
-
-#define MPI2_MANUFACTURING0_PAGEVERSION (0x00)
-
-
-/* Manufacturing Page 1 */
-
-typedef struct _MPI2_CONFIG_PAGE_MAN_1
-{
- MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */
- U8 VPD[256]; /* 0x04 */
-} MPI2_CONFIG_PAGE_MAN_1,
- MPI2_POINTER PTR_MPI2_CONFIG_PAGE_MAN_1,
- Mpi2ManufacturingPage1_t, MPI2_POINTER pMpi2ManufacturingPage1_t;
-
-#define MPI2_MANUFACTURING1_PAGEVERSION (0x00)
-
-
-typedef struct _MPI2_CHIP_REVISION_ID
-{
- U16 DeviceID; /* 0x00 */
- U8 PCIRevisionID; /* 0x02 */
- U8 Reserved; /* 0x03 */
-} MPI2_CHIP_REVISION_ID, MPI2_POINTER PTR_MPI2_CHIP_REVISION_ID,
- Mpi2ChipRevisionId_t, MPI2_POINTER pMpi2ChipRevisionId_t;
-
-
-/* Manufacturing Page 2 */
-
-/*
- * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
- * one and check Header.PageLength at runtime.
- */
-#ifndef MPI2_MAN_PAGE_2_HW_SETTINGS_WORDS
-#define MPI2_MAN_PAGE_2_HW_SETTINGS_WORDS (1)
-#endif
-
-typedef struct _MPI2_CONFIG_PAGE_MAN_2
-{
- MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */
- MPI2_CHIP_REVISION_ID ChipId; /* 0x04 */
- U32 HwSettings[MPI2_MAN_PAGE_2_HW_SETTINGS_WORDS];/* 0x08 */
-} MPI2_CONFIG_PAGE_MAN_2,
- MPI2_POINTER PTR_MPI2_CONFIG_PAGE_MAN_2,
- Mpi2ManufacturingPage2_t, MPI2_POINTER pMpi2ManufacturingPage2_t;
-
-#define MPI2_MANUFACTURING2_PAGEVERSION (0x00)
-
-
-/* Manufacturing Page 3 */
-
-/*
- * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
- * one and check Header.PageLength at runtime.
- */
-#ifndef MPI2_MAN_PAGE_3_INFO_WORDS
-#define MPI2_MAN_PAGE_3_INFO_WORDS (1)
-#endif
-
-typedef struct _MPI2_CONFIG_PAGE_MAN_3
-{
- MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */
- MPI2_CHIP_REVISION_ID ChipId; /* 0x04 */
- U32 Info[MPI2_MAN_PAGE_3_INFO_WORDS];/* 0x08 */
-} MPI2_CONFIG_PAGE_MAN_3,
- MPI2_POINTER PTR_MPI2_CONFIG_PAGE_MAN_3,
- Mpi2ManufacturingPage3_t, MPI2_POINTER pMpi2ManufacturingPage3_t;
-
-#define MPI2_MANUFACTURING3_PAGEVERSION (0x00)
-
-
-/* Manufacturing Page 4 */
-
-typedef struct _MPI2_MANPAGE4_PWR_SAVE_SETTINGS
-{
- U8 PowerSaveFlags; /* 0x00 */
- U8 InternalOperationsSleepTime; /* 0x01 */
- U8 InternalOperationsRunTime; /* 0x02 */
- U8 HostIdleTime; /* 0x03 */
-} MPI2_MANPAGE4_PWR_SAVE_SETTINGS,
- MPI2_POINTER PTR_MPI2_MANPAGE4_PWR_SAVE_SETTINGS,
- Mpi2ManPage4PwrSaveSettings_t, MPI2_POINTER pMpi2ManPage4PwrSaveSettings_t;
-
-/* defines for the PowerSaveFlags field */
-#define MPI2_MANPAGE4_MASK_POWERSAVE_MODE (0x03)
-#define MPI2_MANPAGE4_POWERSAVE_MODE_DISABLED (0x00)
-#define MPI2_MANPAGE4_CUSTOM_POWERSAVE_MODE (0x01)
-#define MPI2_MANPAGE4_FULL_POWERSAVE_MODE (0x02)
-
-typedef struct _MPI2_CONFIG_PAGE_MAN_4
-{
- MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */
- U32 Reserved1; /* 0x04 */
- U32 Flags; /* 0x08 */
- U8 InquirySize; /* 0x0C */
- U8 Reserved2; /* 0x0D */
- U16 Reserved3; /* 0x0E */
- U8 InquiryData[56]; /* 0x10 */
- U32 RAID0VolumeSettings; /* 0x48 */
- U32 RAID1EVolumeSettings; /* 0x4C */
- U32 RAID1VolumeSettings; /* 0x50 */
- U32 RAID10VolumeSettings; /* 0x54 */
- U32 Reserved4; /* 0x58 */
- U32 Reserved5; /* 0x5C */
- MPI2_MANPAGE4_PWR_SAVE_SETTINGS PowerSaveSettings; /* 0x60 */
- U8 MaxOCEDisks; /* 0x64 */
- U8 ResyncRate; /* 0x65 */
- U16 DataScrubDuration; /* 0x66 */
- U8 MaxHotSpares; /* 0x68 */
- U8 MaxPhysDisksPerVol; /* 0x69 */
- U8 MaxPhysDisks; /* 0x6A */
- U8 MaxVolumes; /* 0x6B */
-} MPI2_CONFIG_PAGE_MAN_4,
- MPI2_POINTER PTR_MPI2_CONFIG_PAGE_MAN_4,
- Mpi2ManufacturingPage4_t, MPI2_POINTER pMpi2ManufacturingPage4_t;
-
-#define MPI2_MANUFACTURING4_PAGEVERSION (0x0A)
-
-/* Manufacturing Page 4 Flags field */
-#define MPI2_MANPAGE4_METADATA_SIZE_MASK (0x00030000)
-#define MPI2_MANPAGE4_METADATA_512MB (0x00000000)
-
-#define MPI2_MANPAGE4_MIX_SSD_SAS_SATA (0x00008000)
-#define MPI2_MANPAGE4_MIX_SSD_AND_NON_SSD (0x00004000)
-#define MPI2_MANPAGE4_HIDE_PHYSDISK_NON_IR (0x00002000)
-
-#define MPI2_MANPAGE4_MASK_PHYSDISK_COERCION (0x00001C00)
-#define MPI2_MANPAGE4_PHYSDISK_COERCION_1GB (0x00000000)
-#define MPI2_MANPAGE4_PHYSDISK_128MB_COERCION (0x00000400)
-#define MPI2_MANPAGE4_PHYSDISK_ADAPTIVE_COERCION (0x00000800)
-#define MPI2_MANPAGE4_PHYSDISK_ZERO_COERCION (0x00000C00)
-
-#define MPI2_MANPAGE4_MASK_BAD_BLOCK_MARKING (0x00000300)
-#define MPI2_MANPAGE4_DEFAULT_BAD_BLOCK_MARKING (0x00000000)
-#define MPI2_MANPAGE4_TABLE_BAD_BLOCK_MARKING (0x00000100)
-#define MPI2_MANPAGE4_WRITE_LONG_BAD_BLOCK_MARKING (0x00000200)
-
-#define MPI2_MANPAGE4_FORCE_OFFLINE_FAILOVER (0x00000080)
-#define MPI2_MANPAGE4_RAID10_DISABLE (0x00000040)
-#define MPI2_MANPAGE4_RAID1E_DISABLE (0x00000020)
-#define MPI2_MANPAGE4_RAID1_DISABLE (0x00000010)
-#define MPI2_MANPAGE4_RAID0_DISABLE (0x00000008)
-#define MPI2_MANPAGE4_IR_MODEPAGE8_DISABLE (0x00000004)
-#define MPI2_MANPAGE4_IM_RESYNC_CACHE_ENABLE (0x00000002)
-#define MPI2_MANPAGE4_IR_NO_MIX_SAS_SATA (0x00000001)
-
-
-/* Manufacturing Page 5 */
-
-/*
- * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
- * one and check the value returned for NumPhys at runtime.
- */
-#ifndef MPI2_MAN_PAGE_5_PHY_ENTRIES
-#define MPI2_MAN_PAGE_5_PHY_ENTRIES (1)
-#endif
-
-typedef struct _MPI2_MANUFACTURING5_ENTRY
-{
- U64 WWID; /* 0x00 */
- U64 DeviceName; /* 0x08 */
-} MPI2_MANUFACTURING5_ENTRY, MPI2_POINTER PTR_MPI2_MANUFACTURING5_ENTRY,
- Mpi2Manufacturing5Entry_t, MPI2_POINTER pMpi2Manufacturing5Entry_t;
-
-typedef struct _MPI2_CONFIG_PAGE_MAN_5
-{
- MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */
- U8 NumPhys; /* 0x04 */
- U8 Reserved1; /* 0x05 */
- U16 Reserved2; /* 0x06 */
- U32 Reserved3; /* 0x08 */
- U32 Reserved4; /* 0x0C */
- MPI2_MANUFACTURING5_ENTRY Phy[MPI2_MAN_PAGE_5_PHY_ENTRIES];/* 0x08 */
-} MPI2_CONFIG_PAGE_MAN_5,
- MPI2_POINTER PTR_MPI2_CONFIG_PAGE_MAN_5,
- Mpi2ManufacturingPage5_t, MPI2_POINTER pMpi2ManufacturingPage5_t;
-
-#define MPI2_MANUFACTURING5_PAGEVERSION (0x03)
-
-
-/* Manufacturing Page 6 */
-
-typedef struct _MPI2_CONFIG_PAGE_MAN_6
-{
- MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */
- U32 ProductSpecificInfo;/* 0x04 */
-} MPI2_CONFIG_PAGE_MAN_6,
- MPI2_POINTER PTR_MPI2_CONFIG_PAGE_MAN_6,
- Mpi2ManufacturingPage6_t, MPI2_POINTER pMpi2ManufacturingPage6_t;
-
-#define MPI2_MANUFACTURING6_PAGEVERSION (0x00)
-
-
-/* Manufacturing Page 7 */
-
-typedef struct _MPI2_MANPAGE7_CONNECTOR_INFO
-{
- U32 Pinout; /* 0x00 */
- U8 Connector[16]; /* 0x04 */
- U8 Location; /* 0x14 */
- U8 ReceptacleID; /* 0x15 */
- U16 Slot; /* 0x16 */
- U32 Reserved2; /* 0x18 */
-} MPI2_MANPAGE7_CONNECTOR_INFO, MPI2_POINTER PTR_MPI2_MANPAGE7_CONNECTOR_INFO,
- Mpi2ManPage7ConnectorInfo_t, MPI2_POINTER pMpi2ManPage7ConnectorInfo_t;
-
-/* defines for the Pinout field */
-#define MPI2_MANPAGE7_PINOUT_LANE_MASK (0x0000FF00)
-#define MPI2_MANPAGE7_PINOUT_LANE_SHIFT (8)
-
-#define MPI2_MANPAGE7_PINOUT_TYPE_MASK (0x000000FF)
-#define MPI2_MANPAGE7_PINOUT_TYPE_UNKNOWN (0x00)
-#define MPI2_MANPAGE7_PINOUT_SATA_SINGLE (0x01)
-#define MPI2_MANPAGE7_PINOUT_SFF_8482 (0x02)
-#define MPI2_MANPAGE7_PINOUT_SFF_8486 (0x03)
-#define MPI2_MANPAGE7_PINOUT_SFF_8484 (0x04)
-#define MPI2_MANPAGE7_PINOUT_SFF_8087 (0x05)
-#define MPI2_MANPAGE7_PINOUT_SFF_8643_4I (0x06)
-#define MPI2_MANPAGE7_PINOUT_SFF_8643_8I (0x07)
-#define MPI2_MANPAGE7_PINOUT_SFF_8470 (0x08)
-#define MPI2_MANPAGE7_PINOUT_SFF_8088 (0x09)
-#define MPI2_MANPAGE7_PINOUT_SFF_8644_4X (0x0A)
-#define MPI2_MANPAGE7_PINOUT_SFF_8644_8X (0x0B)
-#define MPI2_MANPAGE7_PINOUT_SFF_8644_16X (0x0C)
-#define MPI2_MANPAGE7_PINOUT_SFF_8436 (0x0D)
-
-/* defines for the Location field */
-#define MPI2_MANPAGE7_LOCATION_UNKNOWN (0x01)
-#define MPI2_MANPAGE7_LOCATION_INTERNAL (0x02)
-#define MPI2_MANPAGE7_LOCATION_EXTERNAL (0x04)
-#define MPI2_MANPAGE7_LOCATION_SWITCHABLE (0x08)
-#define MPI2_MANPAGE7_LOCATION_AUTO (0x10)
-#define MPI2_MANPAGE7_LOCATION_NOT_PRESENT (0x20)
-#define MPI2_MANPAGE7_LOCATION_NOT_CONNECTED (0x80)
-
-/*
- * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
- * one and check the value returned for NumPhys at runtime.
- */
-#ifndef MPI2_MANPAGE7_CONNECTOR_INFO_MAX
-#define MPI2_MANPAGE7_CONNECTOR_INFO_MAX (1)
-#endif
-
-typedef struct _MPI2_CONFIG_PAGE_MAN_7
-{
- MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */
- U32 Reserved1; /* 0x04 */
- U32 Reserved2; /* 0x08 */
- U32 Flags; /* 0x0C */
- U8 EnclosureName[16]; /* 0x10 */
- U8 NumPhys; /* 0x20 */
- U8 Reserved3; /* 0x21 */
- U16 Reserved4; /* 0x22 */
- MPI2_MANPAGE7_CONNECTOR_INFO ConnectorInfo[MPI2_MANPAGE7_CONNECTOR_INFO_MAX]; /* 0x24 */
-} MPI2_CONFIG_PAGE_MAN_7,
- MPI2_POINTER PTR_MPI2_CONFIG_PAGE_MAN_7,
- Mpi2ManufacturingPage7_t, MPI2_POINTER pMpi2ManufacturingPage7_t;
-
-#define MPI2_MANUFACTURING7_PAGEVERSION (0x01)
-
-/* defines for the Flags field */
-#define MPI2_MANPAGE7_FLAG_BASE_ENCLOSURE_LEVEL (0x00000008)
-#define MPI2_MANPAGE7_FLAG_EVENTREPLAY_SLOT_ORDER (0x00000002)
-#define MPI2_MANPAGE7_FLAG_USE_SLOT_INFO (0x00000001)
-
-
-/*
- * Generic structure to use for product-specific manufacturing pages
- * (currently Manufacturing Page 8 through Manufacturing Page 31).
- */
-
-typedef struct _MPI2_CONFIG_PAGE_MAN_PS
-{
- MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */
- U32 ProductSpecificInfo;/* 0x04 */
-} MPI2_CONFIG_PAGE_MAN_PS,
- MPI2_POINTER PTR_MPI2_CONFIG_PAGE_MAN_PS,
- Mpi2ManufacturingPagePS_t, MPI2_POINTER pMpi2ManufacturingPagePS_t;
-
-#define MPI2_MANUFACTURING8_PAGEVERSION (0x00)
-#define MPI2_MANUFACTURING9_PAGEVERSION (0x00)
-#define MPI2_MANUFACTURING10_PAGEVERSION (0x00)
-#define MPI2_MANUFACTURING11_PAGEVERSION (0x00)
-#define MPI2_MANUFACTURING12_PAGEVERSION (0x00)
-#define MPI2_MANUFACTURING13_PAGEVERSION (0x00)
-#define MPI2_MANUFACTURING14_PAGEVERSION (0x00)
-#define MPI2_MANUFACTURING15_PAGEVERSION (0x00)
-#define MPI2_MANUFACTURING16_PAGEVERSION (0x00)
-#define MPI2_MANUFACTURING17_PAGEVERSION (0x00)
-#define MPI2_MANUFACTURING18_PAGEVERSION (0x00)
-#define MPI2_MANUFACTURING19_PAGEVERSION (0x00)
-#define MPI2_MANUFACTURING20_PAGEVERSION (0x00)
-#define MPI2_MANUFACTURING21_PAGEVERSION (0x00)
-#define MPI2_MANUFACTURING22_PAGEVERSION (0x00)
-#define MPI2_MANUFACTURING23_PAGEVERSION (0x00)
-#define MPI2_MANUFACTURING24_PAGEVERSION (0x00)
-#define MPI2_MANUFACTURING25_PAGEVERSION (0x00)
-#define MPI2_MANUFACTURING26_PAGEVERSION (0x00)
-#define MPI2_MANUFACTURING27_PAGEVERSION (0x00)
-#define MPI2_MANUFACTURING28_PAGEVERSION (0x00)
-#define MPI2_MANUFACTURING29_PAGEVERSION (0x00)
-#define MPI2_MANUFACTURING30_PAGEVERSION (0x00)
-#define MPI2_MANUFACTURING31_PAGEVERSION (0x00)
-
-
-/****************************************************************************
-* IO Unit Config Pages
-****************************************************************************/
-
-/* IO Unit Page 0 */
-
-typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_0
-{
- MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */
- U64 UniqueValue; /* 0x04 */
- MPI2_VERSION_UNION NvdataVersionDefault; /* 0x08 */
- MPI2_VERSION_UNION NvdataVersionPersistent; /* 0x0A */
-} MPI2_CONFIG_PAGE_IO_UNIT_0, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_IO_UNIT_0,
- Mpi2IOUnitPage0_t, MPI2_POINTER pMpi2IOUnitPage0_t;
-
-#define MPI2_IOUNITPAGE0_PAGEVERSION (0x02)
-
-
-/* IO Unit Page 1 */
-
-typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_1
-{
- MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */
- U32 Flags; /* 0x04 */
-} MPI2_CONFIG_PAGE_IO_UNIT_1, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_IO_UNIT_1,
- Mpi2IOUnitPage1_t, MPI2_POINTER pMpi2IOUnitPage1_t;
-
-#define MPI2_IOUNITPAGE1_PAGEVERSION (0x04)
-
-/* IO Unit Page 1 Flags defines */
-#define MPI2_IOUNITPAGE1_ATA_SECURITY_FREEZE_LOCK (0x00004000)
-#define MPI2_IOUNITPAGE1_ENABLE_HOST_BASED_DISCOVERY (0x00000800)
-#define MPI2_IOUNITPAGE1_MASK_SATA_WRITE_CACHE (0x00000600)
-#define MPI2_IOUNITPAGE1_SATA_WRITE_CACHE_SHIFT (9)
-#define MPI2_IOUNITPAGE1_ENABLE_SATA_WRITE_CACHE (0x00000000)
-#define MPI2_IOUNITPAGE1_DISABLE_SATA_WRITE_CACHE (0x00000200)
-#define MPI2_IOUNITPAGE1_UNCHANGED_SATA_WRITE_CACHE (0x00000400)
-#define MPI2_IOUNITPAGE1_NATIVE_COMMAND_Q_DISABLE (0x00000100)
-#define MPI2_IOUNITPAGE1_DISABLE_IR (0x00000040)
-#define MPI2_IOUNITPAGE1_DISABLE_TASK_SET_FULL_HANDLING (0x00000020)
-#define MPI2_IOUNITPAGE1_IR_USE_STATIC_VOLUME_ID (0x00000004)
-
-
-/* IO Unit Page 3 */
-
-/*
- * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
- * one and check the value returned for GPIOCount at runtime.
- */
-#ifndef MPI2_IO_UNIT_PAGE_3_GPIO_VAL_MAX
-#define MPI2_IO_UNIT_PAGE_3_GPIO_VAL_MAX (1)
-#endif
-
-typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_3
-{
- MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */
- U8 GPIOCount; /* 0x04 */
- U8 Reserved1; /* 0x05 */
- U16 Reserved2; /* 0x06 */
- U16 GPIOVal[MPI2_IO_UNIT_PAGE_3_GPIO_VAL_MAX];/* 0x08 */
-} MPI2_CONFIG_PAGE_IO_UNIT_3, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_IO_UNIT_3,
- Mpi2IOUnitPage3_t, MPI2_POINTER pMpi2IOUnitPage3_t;
-
-#define MPI2_IOUNITPAGE3_PAGEVERSION (0x01)
-
-/* defines for IO Unit Page 3 GPIOVal field */
-#define MPI2_IOUNITPAGE3_GPIO_FUNCTION_MASK (0xFFFC)
-#define MPI2_IOUNITPAGE3_GPIO_FUNCTION_SHIFT (2)
-#define MPI2_IOUNITPAGE3_GPIO_SETTING_OFF (0x0000)
-#define MPI2_IOUNITPAGE3_GPIO_SETTING_ON (0x0001)
-
-
-/* IO Unit Page 5 */
-
-/*
- * Upper layer code (drivers, utilities, etc.) should leave this define set to
- * one and check the value returned for NumDmaEngines at runtime.
- */
-#ifndef MPI2_IOUNITPAGE5_DMAENGINE_ENTRIES
-#define MPI2_IOUNITPAGE5_DMAENGINE_ENTRIES (1)
-#endif
-
-typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_5 {
- MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */
- U64 RaidAcceleratorBufferBaseAddress; /* 0x04 */
- U64 RaidAcceleratorBufferSize; /* 0x0C */
- U64 RaidAcceleratorControlBaseAddress; /* 0x14 */
- U8 RAControlSize; /* 0x1C */
- U8 NumDmaEngines; /* 0x1D */
- U8 RAMinControlSize; /* 0x1E */
- U8 RAMaxControlSize; /* 0x1F */
- U32 Reserved1; /* 0x20 */
- U32 Reserved2; /* 0x24 */
- U32 Reserved3; /* 0x28 */
- U32 DmaEngineCapabilities
- [MPI2_IOUNITPAGE5_DMAENGINE_ENTRIES]; /* 0x2C */
-} MPI2_CONFIG_PAGE_IO_UNIT_5, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_IO_UNIT_5,
- Mpi2IOUnitPage5_t, MPI2_POINTER pMpi2IOUnitPage5_t;
-
-#define MPI2_IOUNITPAGE5_PAGEVERSION (0x00)
-
-/* defines for IO Unit Page 5 DmaEngineCapabilities field */
-#define MPI2_IOUNITPAGE5_DMA_CAP_MASK_MAX_REQUESTS (0xFFFF0000)
-#define MPI2_IOUNITPAGE5_DMA_CAP_SHIFT_MAX_REQUESTS (16)
-
-#define MPI2_IOUNITPAGE5_DMA_CAP_EEDP (0x0008)
-#define MPI2_IOUNITPAGE5_DMA_CAP_PARITY_GENERATION (0x0004)
-#define MPI2_IOUNITPAGE5_DMA_CAP_HASHING (0x0002)
-#define MPI2_IOUNITPAGE5_DMA_CAP_ENCRYPTION (0x0001)
-
-
-/* IO Unit Page 6 */
-
-typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_6 {
- MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */
- U16 Flags; /* 0x04 */
- U8 RAHostControlSize; /* 0x06 */
- U8 Reserved0; /* 0x07 */
- U64 RaidAcceleratorHostControlBaseAddress; /* 0x08 */
- U32 Reserved1; /* 0x10 */
- U32 Reserved2; /* 0x14 */
- U32 Reserved3; /* 0x18 */
-} MPI2_CONFIG_PAGE_IO_UNIT_6, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_IO_UNIT_6,
- Mpi2IOUnitPage6_t, MPI2_POINTER pMpi2IOUnitPage6_t;
-
-#define MPI2_IOUNITPAGE6_PAGEVERSION (0x00)
-
-/* defines for IO Unit Page 6 Flags field */
-#define MPI2_IOUNITPAGE6_FLAGS_ENABLE_RAID_ACCELERATOR (0x0001)
-
-
-/* IO Unit Page 7 */
-
-typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_7 {
- MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */
- U16 Reserved1; /* 0x04 */
- U8 PCIeWidth; /* 0x06 */
- U8 PCIeSpeed; /* 0x07 */
- U32 ProcessorState; /* 0x08 */
- U32 PowerManagementCapabilities; /* 0x0C */
- U16 IOCTemperature; /* 0x10 */
- U8 IOCTemperatureUnits; /* 0x12 */
- U8 IOCSpeed; /* 0x13 */
- U16 BoardTemperature; /* 0x14 */
- U8 BoardTemperatureUnits; /* 0x16 */
- U8 Reserved3; /* 0x17 */
- U32 Reserved4; /* 0x18 */
- U32 Reserved5; /* 0x1C */
- U32 Reserved6; /* 0x20 */
- U32 Reserved7; /* 0x24 */
-} MPI2_CONFIG_PAGE_IO_UNIT_7, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_IO_UNIT_7,
- Mpi2IOUnitPage7_t, MPI2_POINTER pMpi2IOUnitPage7_t;
-
-#define MPI2_IOUNITPAGE7_PAGEVERSION (0x04)
-
-/* defines for IO Unit Page 7 PCIeWidth field */
-#define MPI2_IOUNITPAGE7_PCIE_WIDTH_X1 (0x01)
-#define MPI2_IOUNITPAGE7_PCIE_WIDTH_X2 (0x02)
-#define MPI2_IOUNITPAGE7_PCIE_WIDTH_X4 (0x04)
-#define MPI2_IOUNITPAGE7_PCIE_WIDTH_X8 (0x08)
-
-/* defines for IO Unit Page 7 PCIeSpeed field */
-#define MPI2_IOUNITPAGE7_PCIE_SPEED_2_5_GBPS (0x00)
-#define MPI2_IOUNITPAGE7_PCIE_SPEED_5_0_GBPS (0x01)
-#define MPI2_IOUNITPAGE7_PCIE_SPEED_8_0_GBPS (0x02)
-
-/* defines for IO Unit Page 7 ProcessorState field */
-#define MPI2_IOUNITPAGE7_PSTATE_MASK_SECOND (0x0000000F)
-#define MPI2_IOUNITPAGE7_PSTATE_SHIFT_SECOND (0)
-
-#define MPI2_IOUNITPAGE7_PSTATE_NOT_PRESENT (0x00)
-#define MPI2_IOUNITPAGE7_PSTATE_DISABLED (0x01)
-#define MPI2_IOUNITPAGE7_PSTATE_ENABLED (0x02)
-
-/* defines for IO Unit Page 7 PowerManagementCapabilities field */
-#define MPI2_IOUNITPAGE7_PMCAP_12_5_PCT_IOCSPEED (0x00000400)
-#define MPI2_IOUNITPAGE7_PMCAP_25_0_PCT_IOCSPEED (0x00000200)
-#define MPI2_IOUNITPAGE7_PMCAP_50_0_PCT_IOCSPEED (0x00000100)
-#define MPI2_IOUNITPAGE7_PMCAP_PCIE_WIDTH_CHANGE (0x00000008) /* obsolete */
-#define MPI2_IOUNITPAGE7_PMCAP_PCIE_SPEED_CHANGE (0x00000004) /* obsolete */
-
-/* defines for IO Unit Page 7 IOCTemperatureUnits field */
-#define MPI2_IOUNITPAGE7_IOC_TEMP_NOT_PRESENT (0x00)
-#define MPI2_IOUNITPAGE7_IOC_TEMP_FAHRENHEIT (0x01)
-#define MPI2_IOUNITPAGE7_IOC_TEMP_CELSIUS (0x02)
-
-/* defines for IO Unit Page 7 IOCSpeed field */
-#define MPI2_IOUNITPAGE7_IOC_SPEED_FULL (0x01)
-#define MPI2_IOUNITPAGE7_IOC_SPEED_HALF (0x02)
-#define MPI2_IOUNITPAGE7_IOC_SPEED_QUARTER (0x04)
-#define MPI2_IOUNITPAGE7_IOC_SPEED_EIGHTH (0x08)
-
-/* defines for IO Unit Page 7 BoardTemperatureUnits field */
-#define MPI2_IOUNITPAGE7_BOARD_TEMP_NOT_PRESENT (0x00)
-#define MPI2_IOUNITPAGE7_BOARD_TEMP_FAHRENHEIT (0x01)
-#define MPI2_IOUNITPAGE7_BOARD_TEMP_CELSIUS (0x02)
-
-/* IO Unit Page 8 */
-
-#define MPI2_IOUNIT8_NUM_THRESHOLDS (4)
-
-typedef struct _MPI2_IOUNIT8_SENSOR {
- U16 Flags; /* 0x00 */
- U16 Reserved1; /* 0x02 */
- U16
- Threshold[MPI2_IOUNIT8_NUM_THRESHOLDS]; /* 0x04 */
- U32 Reserved2; /* 0x0C */
- U32 Reserved3; /* 0x10 */
- U32 Reserved4; /* 0x14 */
-} MPI2_IOUNIT8_SENSOR, MPI2_POINTER PTR_MPI2_IOUNIT8_SENSOR,
-Mpi2IOUnit8Sensor_t, MPI2_POINTER pMpi2IOUnit8Sensor_t;
-
-/* defines for IO Unit Page 8 Sensor Flags field */
-#define MPI2_IOUNIT8_SENSOR_FLAGS_T3_ENABLE (0x0008)
-#define MPI2_IOUNIT8_SENSOR_FLAGS_T2_ENABLE (0x0004)
-#define MPI2_IOUNIT8_SENSOR_FLAGS_T1_ENABLE (0x0002)
-#define MPI2_IOUNIT8_SENSOR_FLAGS_T0_ENABLE (0x0001)
-
-/*
- * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
- * one and check the value returned for NumSensors at runtime.
- */
-#ifndef MPI2_IOUNITPAGE8_SENSOR_ENTRIES
-#define MPI2_IOUNITPAGE8_SENSOR_ENTRIES (1)
-#endif
-
-typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_8 {
- MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */
- U32 Reserved1; /* 0x04 */
- U32 Reserved2; /* 0x08 */
- U8 NumSensors; /* 0x0C */
- U8 PollingInterval; /* 0x0D */
- U16 Reserved3; /* 0x0E */
- MPI2_IOUNIT8_SENSOR
- Sensor[MPI2_IOUNITPAGE8_SENSOR_ENTRIES];/* 0x10 */
-} MPI2_CONFIG_PAGE_IO_UNIT_8, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_IO_UNIT_8,
-Mpi2IOUnitPage8_t, MPI2_POINTER pMpi2IOUnitPage8_t;
-
-#define MPI2_IOUNITPAGE8_PAGEVERSION (0x00)
-
-
-/* IO Unit Page 9 */
-
-typedef struct _MPI2_IOUNIT9_SENSOR {
- U16 CurrentTemperature; /* 0x00 */
- U16 Reserved1; /* 0x02 */
- U8 Flags; /* 0x04 */
- U8 Reserved2; /* 0x05 */
- U16 Reserved3; /* 0x06 */
- U32 Reserved4; /* 0x08 */
- U32 Reserved5; /* 0x0C */
-} MPI2_IOUNIT9_SENSOR, MPI2_POINTER PTR_MPI2_IOUNIT9_SENSOR,
-Mpi2IOUnit9Sensor_t, MPI2_POINTER pMpi2IOUnit9Sensor_t;
-
-/* defines for IO Unit Page 9 Sensor Flags field */
-#define MPI2_IOUNIT9_SENSOR_FLAGS_TEMP_VALID (0x01)
-
-/*
- * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
- * one and check the value returned for NumSensors at runtime.
- */
-#ifndef MPI2_IOUNITPAGE9_SENSOR_ENTRIES
-#define MPI2_IOUNITPAGE9_SENSOR_ENTRIES (1)
-#endif
-
-typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_9 {
- MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */
- U32 Reserved1; /* 0x04 */
- U32 Reserved2; /* 0x08 */
- U8 NumSensors; /* 0x0C */
- U8 Reserved4; /* 0x0D */
- U16 Reserved3; /* 0x0E */
- MPI2_IOUNIT9_SENSOR
- Sensor[MPI2_IOUNITPAGE9_SENSOR_ENTRIES];/* 0x10 */
-} MPI2_CONFIG_PAGE_IO_UNIT_9, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_IO_UNIT_9,
-Mpi2IOUnitPage9_t, MPI2_POINTER pMpi2IOUnitPage9_t;
-
-#define MPI2_IOUNITPAGE9_PAGEVERSION (0x00)
-
-
-/* IO Unit Page 10 */
-
-typedef struct _MPI2_IOUNIT10_FUNCTION {
- U8 CreditPercent; /* 0x00 */
- U8 Reserved1; /* 0x01 */
- U16 Reserved2; /* 0x02 */
-} MPI2_IOUNIT10_FUNCTION, MPI2_POINTER PTR_MPI2_IOUNIT10_FUNCTION,
-Mpi2IOUnit10Function_t, MPI2_POINTER pMpi2IOUnit10Function_t;
-
-/*
- * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
- * one and check the value returned for NumFunctions at runtime.
- */
-#ifndef MPI2_IOUNITPAGE10_FUNCTION_ENTRIES
-#define MPI2_IOUNITPAGE10_FUNCTION_ENTRIES (1)
-#endif
-
-typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_10 {
- MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */
- U8 NumFunctions; /* 0x04 */
- U8 Reserved1; /* 0x05 */
- U16 Reserved2; /* 0x06 */
- U32 Reserved3; /* 0x08 */
- U32 Reserved4; /* 0x0C */
- MPI2_IOUNIT10_FUNCTION
- Function[MPI2_IOUNITPAGE10_FUNCTION_ENTRIES];/* 0x10 */
-} MPI2_CONFIG_PAGE_IO_UNIT_10, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_IO_UNIT_10,
-Mpi2IOUnitPage10_t, MPI2_POINTER pMpi2IOUnitPage10_t;
-
-#define MPI2_IOUNITPAGE10_PAGEVERSION (0x01)
-
-
-
-/****************************************************************************
-* IOC Config Pages
-****************************************************************************/
-
-/* IOC Page 0 */
-
-typedef struct _MPI2_CONFIG_PAGE_IOC_0
-{
- MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */
- U32 Reserved1; /* 0x04 */
- U32 Reserved2; /* 0x08 */
- U16 VendorID; /* 0x0C */
- U16 DeviceID; /* 0x0E */
- U8 RevisionID; /* 0x10 */
- U8 Reserved3; /* 0x11 */
- U16 Reserved4; /* 0x12 */
- U32 ClassCode; /* 0x14 */
- U16 SubsystemVendorID; /* 0x18 */
- U16 SubsystemID; /* 0x1A */
-} MPI2_CONFIG_PAGE_IOC_0, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_IOC_0,
- Mpi2IOCPage0_t, MPI2_POINTER pMpi2IOCPage0_t;
-
-#define MPI2_IOCPAGE0_PAGEVERSION (0x02)
-
-
-/* IOC Page 1 */
-
-typedef struct _MPI2_CONFIG_PAGE_IOC_1
-{
- MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */
- U32 Flags; /* 0x04 */
- U32 CoalescingTimeout; /* 0x08 */
- U8 CoalescingDepth; /* 0x0C */
- U8 PCISlotNum; /* 0x0D */
- U8 PCIBusNum; /* 0x0E */
- U8 PCIDomainSegment; /* 0x0F */
- U32 Reserved1; /* 0x10 */
- U32 Reserved2; /* 0x14 */
-} MPI2_CONFIG_PAGE_IOC_1, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_IOC_1,
- Mpi2IOCPage1_t, MPI2_POINTER pMpi2IOCPage1_t;
-
-#define MPI2_IOCPAGE1_PAGEVERSION (0x05)
-
-/* defines for IOC Page 1 Flags field */
-#define MPI2_IOCPAGE1_REPLY_COALESCING (0x00000001)
-
-#define MPI2_IOCPAGE1_PCISLOTNUM_UNKNOWN (0xFF)
-#define MPI2_IOCPAGE1_PCIBUSNUM_UNKNOWN (0xFF)
-#define MPI2_IOCPAGE1_PCIDOMAIN_UNKNOWN (0xFF)
-
-/* IOC Page 6 */
-
-typedef struct _MPI2_CONFIG_PAGE_IOC_6
-{
- MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */
- U32 CapabilitiesFlags; /* 0x04 */
- U8 MaxDrivesRAID0; /* 0x08 */
- U8 MaxDrivesRAID1; /* 0x09 */
- U8 MaxDrivesRAID1E; /* 0x0A */
- U8 MaxDrivesRAID10; /* 0x0B */
- U8 MinDrivesRAID0; /* 0x0C */
- U8 MinDrivesRAID1; /* 0x0D */
- U8 MinDrivesRAID1E; /* 0x0E */
- U8 MinDrivesRAID10; /* 0x0F */
- U32 Reserved1; /* 0x10 */
- U8 MaxGlobalHotSpares; /* 0x14 */
- U8 MaxPhysDisks; /* 0x15 */
- U8 MaxVolumes; /* 0x16 */
- U8 MaxConfigs; /* 0x17 */
- U8 MaxOCEDisks; /* 0x18 */
- U8 Reserved2; /* 0x19 */
- U16 Reserved3; /* 0x1A */
- U32 SupportedStripeSizeMapRAID0; /* 0x1C */
- U32 SupportedStripeSizeMapRAID1E; /* 0x20 */
- U32 SupportedStripeSizeMapRAID10; /* 0x24 */
- U32 Reserved4; /* 0x28 */
- U32 Reserved5; /* 0x2C */
- U16 DefaultMetadataSize; /* 0x30 */
- U16 Reserved6; /* 0x32 */
- U16 MaxBadBlockTableEntries; /* 0x34 */
- U16 Reserved7; /* 0x36 */
- U32 IRNvsramVersion; /* 0x38 */
-} MPI2_CONFIG_PAGE_IOC_6, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_IOC_6,
- Mpi2IOCPage6_t, MPI2_POINTER pMpi2IOCPage6_t;
-
-#define MPI2_IOCPAGE6_PAGEVERSION (0x05)
-
-/* defines for IOC Page 6 CapabilitiesFlags */
-#define MPI2_IOCPAGE6_CAP_FLAGS_4K_SECTORS_SUPPORT (0x00000020)
-#define MPI2_IOCPAGE6_CAP_FLAGS_RAID10_SUPPORT (0x00000010)
-#define MPI2_IOCPAGE6_CAP_FLAGS_RAID1_SUPPORT (0x00000008)
-#define MPI2_IOCPAGE6_CAP_FLAGS_RAID1E_SUPPORT (0x00000004)
-#define MPI2_IOCPAGE6_CAP_FLAGS_RAID0_SUPPORT (0x00000002)
-#define MPI2_IOCPAGE6_CAP_FLAGS_GLOBAL_HOT_SPARE (0x00000001)
-
-
-/* IOC Page 7 */
-
-#define MPI2_IOCPAGE7_EVENTMASK_WORDS (4)
-
-typedef struct _MPI2_CONFIG_PAGE_IOC_7
-{
- MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */
- U32 Reserved1; /* 0x04 */
- U32 EventMasks[MPI2_IOCPAGE7_EVENTMASK_WORDS];/* 0x08 */
- U16 SASBroadcastPrimitiveMasks; /* 0x18 */
- U16 SASNotifyPrimitiveMasks; /* 0x1A */
- U32 Reserved3; /* 0x1C */
-} MPI2_CONFIG_PAGE_IOC_7, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_IOC_7,
- Mpi2IOCPage7_t, MPI2_POINTER pMpi2IOCPage7_t;
-
-#define MPI2_IOCPAGE7_PAGEVERSION (0x02)
-
-
-/* IOC Page 8 */
-
-typedef struct _MPI2_CONFIG_PAGE_IOC_8
-{
- MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */
- U8 NumDevsPerEnclosure; /* 0x04 */
- U8 Reserved1; /* 0x05 */
- U16 Reserved2; /* 0x06 */
- U16 MaxPersistentEntries; /* 0x08 */
- U16 MaxNumPhysicalMappedIDs; /* 0x0A */
- U16 Flags; /* 0x0C */
- U16 Reserved3; /* 0x0E */
- U16 IRVolumeMappingFlags; /* 0x10 */
- U16 Reserved4; /* 0x12 */
- U32 Reserved5; /* 0x14 */
-} MPI2_CONFIG_PAGE_IOC_8, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_IOC_8,
- Mpi2IOCPage8_t, MPI2_POINTER pMpi2IOCPage8_t;
-
-#define MPI2_IOCPAGE8_PAGEVERSION (0x00)
-
-/* defines for IOC Page 8 Flags field */
-#define MPI2_IOCPAGE8_FLAGS_DA_START_SLOT_1 (0x00000020)
-#define MPI2_IOCPAGE8_FLAGS_RESERVED_TARGETID_0 (0x00000010)
-
-#define MPI2_IOCPAGE8_FLAGS_MASK_MAPPING_MODE (0x0000000E)
-#define MPI2_IOCPAGE8_FLAGS_DEVICE_PERSISTENCE_MAPPING (0x00000000)
-#define MPI2_IOCPAGE8_FLAGS_ENCLOSURE_SLOT_MAPPING (0x00000002)
-
-#define MPI2_IOCPAGE8_FLAGS_DISABLE_PERSISTENT_MAPPING (0x00000001)
-#define MPI2_IOCPAGE8_FLAGS_ENABLE_PERSISTENT_MAPPING (0x00000000)
-
-/* defines for IOC Page 8 IRVolumeMappingFlags */
-#define MPI2_IOCPAGE8_IRFLAGS_MASK_VOLUME_MAPPING_MODE (0x00000003)
-#define MPI2_IOCPAGE8_IRFLAGS_LOW_VOLUME_MAPPING (0x00000000)
-#define MPI2_IOCPAGE8_IRFLAGS_HIGH_VOLUME_MAPPING (0x00000001)
-
-
-/****************************************************************************
-* BIOS Config Pages
-****************************************************************************/
-
-/* BIOS Page 1 */
-
-typedef struct _MPI2_CONFIG_PAGE_BIOS_1
-{
- MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */
- U32 BiosOptions; /* 0x04 */
- U32 IOCSettings; /* 0x08 */
- U8 SSUTimeout; /* 0x0C */
- U8 Reserved1; /* 0x0D */
- U16 Reserved2; /* 0x0E */
- U32 DeviceSettings; /* 0x10 */
- U16 NumberOfDevices; /* 0x14 */
- U16 UEFIVersion; /* 0x16 */
- U16 IOTimeoutBlockDevicesNonRM; /* 0x18 */
- U16 IOTimeoutSequential; /* 0x1A */
- U16 IOTimeoutOther; /* 0x1C */
- U16 IOTimeoutBlockDevicesRM; /* 0x1E */
-} MPI2_CONFIG_PAGE_BIOS_1, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_BIOS_1,
- Mpi2BiosPage1_t, MPI2_POINTER pMpi2BiosPage1_t;
-
-#define MPI2_BIOSPAGE1_PAGEVERSION (0x07)
-
-/* values for BIOS Page 1 BiosOptions field */
-#define MPI2_BIOSPAGE1_OPTIONS_PNS_MASK (0x00003800)
-#define MPI2_BIOSPAGE1_OPTIONS_PNS_PBDHL (0x00000000)
-#define MPI2_BIOSPAGE1_OPTIONS_PNS_ENCSLOSURE (0x00000800)
-#define MPI2_BIOSPAGE1_OPTIONS_PNS_LWWID (0x00001000)
-#define MPI2_BIOSPAGE1_OPTIONS_PNS_PSENS (0x00001800)
-#define MPI2_BIOSPAGE1_OPTIONS_PNS_ESPHY (0x00002000)
-
-#define MPI2_BIOSPAGE1_OPTIONS_X86_DISABLE_BIOS (0x00000400)
-
-#define MPI2_BIOSPAGE1_OPTIONS_MASK_REGISTRATION_UEFI_BSD (0x00000300)
-#define MPI2_BIOSPAGE1_OPTIONS_USE_BIT0_REGISTRATION_UEFI_BSD (0x00000000)
-#define MPI2_BIOSPAGE1_OPTIONS_FULL_REGISTRATION_UEFI_BSD (0x00000100)
-#define MPI2_BIOSPAGE1_OPTIONS_ADAPTER_REGISTRATION_UEFI_BSD (0x00000200)
-#define MPI2_BIOSPAGE1_OPTIONS_DISABLE_REGISTRATION_UEFI_BSD (0x00000300)
-
-#define MPI2_BIOSPAGE1_OPTIONS_MASK_OEM_ID (0x000000F0)
-#define MPI2_BIOSPAGE1_OPTIONS_LSI_OEM_ID (0x00000000)
-
-#define MPI2_BIOSPAGE1_OPTIONS_MASK_UEFI_HII_REGISTRATION (0x00000006)
-#define MPI2_BIOSPAGE1_OPTIONS_ENABLE_UEFI_HII (0x00000000)
-#define MPI2_BIOSPAGE1_OPTIONS_DISABLE_UEFI_HII (0x00000002)
-#define MPI2_BIOSPAGE1_OPTIONS_VERSION_CHECK_UEFI_HII (0x00000004)
-
-#define MPI2_BIOSPAGE1_OPTIONS_DISABLE_BIOS (0x00000001)
-
-/* values for BIOS Page 1 IOCSettings field */
-#define MPI2_BIOSPAGE1_IOCSET_MASK_BOOT_PREFERENCE (0x00030000)
-#define MPI2_BIOSPAGE1_IOCSET_ENCLOSURE_SLOT_BOOT (0x00000000)
-#define MPI2_BIOSPAGE1_IOCSET_SAS_ADDRESS_BOOT (0x00010000)
-
-#define MPI2_BIOSPAGE1_IOCSET_MASK_RM_SETTING (0x000000C0)
-#define MPI2_BIOSPAGE1_IOCSET_NONE_RM_SETTING (0x00000000)
-#define MPI2_BIOSPAGE1_IOCSET_BOOT_RM_SETTING (0x00000040)
-#define MPI2_BIOSPAGE1_IOCSET_MEDIA_RM_SETTING (0x00000080)
-
-#define MPI2_BIOSPAGE1_IOCSET_MASK_ADAPTER_SUPPORT (0x00000030)
-#define MPI2_BIOSPAGE1_IOCSET_NO_SUPPORT (0x00000000)
-#define MPI2_BIOSPAGE1_IOCSET_BIOS_SUPPORT (0x00000010)
-#define MPI2_BIOSPAGE1_IOCSET_OS_SUPPORT (0x00000020)
-#define MPI2_BIOSPAGE1_IOCSET_ALL_SUPPORT (0x00000030)
-
-#define MPI2_BIOSPAGE1_IOCSET_ALTERNATE_CHS (0x00000008)
-
-/* values for BIOS Page 1 DeviceSettings field */
-#define MPI2_BIOSPAGE1_DEVSET_DISABLE_SMART_POLLING (0x00000010)
-#define MPI2_BIOSPAGE1_DEVSET_DISABLE_SEQ_LUN (0x00000008)
-#define MPI2_BIOSPAGE1_DEVSET_DISABLE_RM_LUN (0x00000004)
-#define MPI2_BIOSPAGE1_DEVSET_DISABLE_NON_RM_LUN (0x00000002)
-#define MPI2_BIOSPAGE1_DEVSET_DISABLE_OTHER_LUN (0x00000001)
-
-/* defines for BIOS Page 1 UEFIVersion field */
-#define MPI2_BIOSPAGE1_UEFI_VER_MAJOR_MASK (0xFF00)
-#define MPI2_BIOSPAGE1_UEFI_VER_MAJOR_SHIFT (8)
-#define MPI2_BIOSPAGE1_UEFI_VER_MINOR_MASK (0x00FF)
-#define MPI2_BIOSPAGE1_UEFI_VER_MINOR_SHIFT (0)
-
-
-
-/* BIOS Page 2 */
-
-typedef struct _MPI2_BOOT_DEVICE_ADAPTER_ORDER
-{
- U32 Reserved1; /* 0x00 */
- U32 Reserved2; /* 0x04 */
- U32 Reserved3; /* 0x08 */
- U32 Reserved4; /* 0x0C */
- U32 Reserved5; /* 0x10 */
- U32 Reserved6; /* 0x14 */
-} MPI2_BOOT_DEVICE_ADAPTER_ORDER,
- MPI2_POINTER PTR_MPI2_BOOT_DEVICE_ADAPTER_ORDER,
- Mpi2BootDeviceAdapterOrder_t, MPI2_POINTER pMpi2BootDeviceAdapterOrder_t;
-
-typedef struct _MPI2_BOOT_DEVICE_SAS_WWID
-{
- U64 SASAddress; /* 0x00 */
- U8 LUN[8]; /* 0x08 */
- U32 Reserved1; /* 0x10 */
- U32 Reserved2; /* 0x14 */
-} MPI2_BOOT_DEVICE_SAS_WWID, MPI2_POINTER PTR_MPI2_BOOT_DEVICE_SAS_WWID,
- Mpi2BootDeviceSasWwid_t, MPI2_POINTER pMpi2BootDeviceSasWwid_t;
-
-typedef struct _MPI2_BOOT_DEVICE_ENCLOSURE_SLOT
-{
- U64 EnclosureLogicalID; /* 0x00 */
- U32 Reserved1; /* 0x08 */
- U32 Reserved2; /* 0x0C */
- U16 SlotNumber; /* 0x10 */
- U16 Reserved3; /* 0x12 */
- U32 Reserved4; /* 0x14 */
-} MPI2_BOOT_DEVICE_ENCLOSURE_SLOT,
- MPI2_POINTER PTR_MPI2_BOOT_DEVICE_ENCLOSURE_SLOT,
- Mpi2BootDeviceEnclosureSlot_t, MPI2_POINTER pMpi2BootDeviceEnclosureSlot_t;
-
-typedef struct _MPI2_BOOT_DEVICE_DEVICE_NAME
-{
- U64 DeviceName; /* 0x00 */
- U8 LUN[8]; /* 0x08 */
- U32 Reserved1; /* 0x10 */
- U32 Reserved2; /* 0x14 */
-} MPI2_BOOT_DEVICE_DEVICE_NAME, MPI2_POINTER PTR_MPI2_BOOT_DEVICE_DEVICE_NAME,
- Mpi2BootDeviceDeviceName_t, MPI2_POINTER pMpi2BootDeviceDeviceName_t;
-
-typedef union _MPI2_MPI2_BIOSPAGE2_BOOT_DEVICE
-{
- MPI2_BOOT_DEVICE_ADAPTER_ORDER AdapterOrder;
- MPI2_BOOT_DEVICE_SAS_WWID SasWwid;
- MPI2_BOOT_DEVICE_ENCLOSURE_SLOT EnclosureSlot;
- MPI2_BOOT_DEVICE_DEVICE_NAME DeviceName;
-} MPI2_BIOSPAGE2_BOOT_DEVICE, MPI2_POINTER PTR_MPI2_BIOSPAGE2_BOOT_DEVICE,
- Mpi2BiosPage2BootDevice_t, MPI2_POINTER pMpi2BiosPage2BootDevice_t;
-
-typedef struct _MPI2_CONFIG_PAGE_BIOS_2
-{
- MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */
- U32 Reserved1; /* 0x04 */
- U32 Reserved2; /* 0x08 */
- U32 Reserved3; /* 0x0C */
- U32 Reserved4; /* 0x10 */
- U32 Reserved5; /* 0x14 */
- U32 Reserved6; /* 0x18 */
- U8 ReqBootDeviceForm; /* 0x1C */
- U8 Reserved7; /* 0x1D */
- U16 Reserved8; /* 0x1E */
- MPI2_BIOSPAGE2_BOOT_DEVICE RequestedBootDevice; /* 0x20 */
- U8 ReqAltBootDeviceForm; /* 0x38 */
- U8 Reserved9; /* 0x39 */
- U16 Reserved10; /* 0x3A */
- MPI2_BIOSPAGE2_BOOT_DEVICE RequestedAltBootDevice; /* 0x3C */
- U8 CurrentBootDeviceForm; /* 0x58 */
- U8 Reserved11; /* 0x59 */
- U16 Reserved12; /* 0x5A */
- MPI2_BIOSPAGE2_BOOT_DEVICE CurrentBootDevice; /* 0x58 */
-} MPI2_CONFIG_PAGE_BIOS_2, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_BIOS_2,
- Mpi2BiosPage2_t, MPI2_POINTER pMpi2BiosPage2_t;
-
-#define MPI2_BIOSPAGE2_PAGEVERSION (0x04)
-
-/* values for BIOS Page 2 BootDeviceForm fields */
-#define MPI2_BIOSPAGE2_FORM_MASK (0x0F)
-#define MPI2_BIOSPAGE2_FORM_NO_DEVICE_SPECIFIED (0x00)
-#define MPI2_BIOSPAGE2_FORM_SAS_WWID (0x05)
-#define MPI2_BIOSPAGE2_FORM_ENCLOSURE_SLOT (0x06)
-#define MPI2_BIOSPAGE2_FORM_DEVICE_NAME (0x07)
-
-
-/* BIOS Page 3 */
-
-typedef struct _MPI2_ADAPTER_INFO
-{
- U8 PciBusNumber; /* 0x00 */
- U8 PciDeviceAndFunctionNumber; /* 0x01 */
- U16 AdapterFlags; /* 0x02 */
-} MPI2_ADAPTER_INFO, MPI2_POINTER PTR_MPI2_ADAPTER_INFO,
- Mpi2AdapterInfo_t, MPI2_POINTER pMpi2AdapterInfo_t;
-
-#define MPI2_ADAPTER_INFO_FLAGS_EMBEDDED (0x0001)
-#define MPI2_ADAPTER_INFO_FLAGS_INIT_STATUS (0x0002)
-
-typedef struct _MPI2_CONFIG_PAGE_BIOS_3
-{
- MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */
- U32 GlobalFlags; /* 0x04 */
- U32 BiosVersion; /* 0x08 */
- MPI2_ADAPTER_INFO AdapterOrder[4]; /* 0x0C */
- U32 Reserved1; /* 0x1C */
-} MPI2_CONFIG_PAGE_BIOS_3, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_BIOS_3,
- Mpi2BiosPage3_t, MPI2_POINTER pMpi2BiosPage3_t;
-
-#define MPI2_BIOSPAGE3_PAGEVERSION (0x00)
-
-/* values for BIOS Page 3 GlobalFlags */
-#define MPI2_BIOSPAGE3_FLAGS_PAUSE_ON_ERROR (0x00000002)
-#define MPI2_BIOSPAGE3_FLAGS_VERBOSE_ENABLE (0x00000004)
-#define MPI2_BIOSPAGE3_FLAGS_HOOK_INT_40_DISABLE (0x00000010)
-
-#define MPI2_BIOSPAGE3_FLAGS_DEV_LIST_DISPLAY_MASK (0x000000E0)
-#define MPI2_BIOSPAGE3_FLAGS_INSTALLED_DEV_DISPLAY (0x00000000)
-#define MPI2_BIOSPAGE3_FLAGS_ADAPTER_DISPLAY (0x00000020)
-#define MPI2_BIOSPAGE3_FLAGS_ADAPTER_DEV_DISPLAY (0x00000040)
-
-
-/* BIOS Page 4 */
-
-/*
- * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
- * one and check the value returned for NumPhys at runtime.
- */
-#ifndef MPI2_BIOS_PAGE_4_PHY_ENTRIES
-#define MPI2_BIOS_PAGE_4_PHY_ENTRIES (1)
-#endif
-
-typedef struct _MPI2_BIOS4_ENTRY
-{
- U64 ReassignmentWWID; /* 0x00 */
- U64 ReassignmentDeviceName; /* 0x08 */
-} MPI2_BIOS4_ENTRY, MPI2_POINTER PTR_MPI2_BIOS4_ENTRY,
- Mpi2MBios4Entry_t, MPI2_POINTER pMpi2Bios4Entry_t;
-
-typedef struct _MPI2_CONFIG_PAGE_BIOS_4
-{
- MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */
- U8 NumPhys; /* 0x04 */
- U8 Reserved1; /* 0x05 */
- U16 Reserved2; /* 0x06 */
- MPI2_BIOS4_ENTRY Phy[MPI2_BIOS_PAGE_4_PHY_ENTRIES]; /* 0x08 */
-} MPI2_CONFIG_PAGE_BIOS_4, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_BIOS_4,
- Mpi2BiosPage4_t, MPI2_POINTER pMpi2BiosPage4_t;
-
-#define MPI2_BIOSPAGE4_PAGEVERSION (0x01)
-
-
-/****************************************************************************
-* RAID Volume Config Pages
-****************************************************************************/
-
-/* RAID Volume Page 0 */
-
-typedef struct _MPI2_RAIDVOL0_PHYS_DISK
-{
- U8 RAIDSetNum; /* 0x00 */
- U8 PhysDiskMap; /* 0x01 */
- U8 PhysDiskNum; /* 0x02 */
- U8 Reserved; /* 0x03 */
-} MPI2_RAIDVOL0_PHYS_DISK, MPI2_POINTER PTR_MPI2_RAIDVOL0_PHYS_DISK,
- Mpi2RaidVol0PhysDisk_t, MPI2_POINTER pMpi2RaidVol0PhysDisk_t;
-
-/* defines for the PhysDiskMap field */
-#define MPI2_RAIDVOL0_PHYSDISK_PRIMARY (0x01)
-#define MPI2_RAIDVOL0_PHYSDISK_SECONDARY (0x02)
-
-typedef struct _MPI2_RAIDVOL0_SETTINGS
-{
- U16 Settings; /* 0x00 */
- U8 HotSparePool; /* 0x01 */
- U8 Reserved; /* 0x02 */
-} MPI2_RAIDVOL0_SETTINGS, MPI2_POINTER PTR_MPI2_RAIDVOL0_SETTINGS,
- Mpi2RaidVol0Settings_t, MPI2_POINTER pMpi2RaidVol0Settings_t;
-
-/* RAID Volume Page 0 HotSparePool defines, also used in RAID Physical Disk */
-#define MPI2_RAID_HOT_SPARE_POOL_0 (0x01)
-#define MPI2_RAID_HOT_SPARE_POOL_1 (0x02)
-#define MPI2_RAID_HOT_SPARE_POOL_2 (0x04)
-#define MPI2_RAID_HOT_SPARE_POOL_3 (0x08)
-#define MPI2_RAID_HOT_SPARE_POOL_4 (0x10)
-#define MPI2_RAID_HOT_SPARE_POOL_5 (0x20)
-#define MPI2_RAID_HOT_SPARE_POOL_6 (0x40)
-#define MPI2_RAID_HOT_SPARE_POOL_7 (0x80)
-
-/* RAID Volume Page 0 VolumeSettings defines */
-#define MPI2_RAIDVOL0_SETTING_USE_PRODUCT_ID_SUFFIX (0x0008)
-#define MPI2_RAIDVOL0_SETTING_AUTO_CONFIG_HSWAP_DISABLE (0x0004)
-
-#define MPI2_RAIDVOL0_SETTING_MASK_WRITE_CACHING (0x0003)
-#define MPI2_RAIDVOL0_SETTING_UNCHANGED (0x0000)
-#define MPI2_RAIDVOL0_SETTING_DISABLE_WRITE_CACHING (0x0001)
-#define MPI2_RAIDVOL0_SETTING_ENABLE_WRITE_CACHING (0x0002)
-
-/*
- * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
- * one and check the value returned for NumPhysDisks at runtime.
- */
-#ifndef MPI2_RAID_VOL_PAGE_0_PHYSDISK_MAX
-#define MPI2_RAID_VOL_PAGE_0_PHYSDISK_MAX (1)
-#endif
-
-typedef struct _MPI2_CONFIG_PAGE_RAID_VOL_0
-{
- MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */
- U16 DevHandle; /* 0x04 */
- U8 VolumeState; /* 0x06 */
- U8 VolumeType; /* 0x07 */
- U32 VolumeStatusFlags; /* 0x08 */
- MPI2_RAIDVOL0_SETTINGS VolumeSettings; /* 0x0C */
- U64 MaxLBA; /* 0x10 */
- U32 StripeSize; /* 0x18 */
- U16 BlockSize; /* 0x1C */
- U16 Reserved1; /* 0x1E */
- U8 SupportedPhysDisks; /* 0x20 */
- U8 ResyncRate; /* 0x21 */
- U16 DataScrubDuration; /* 0x22 */
- U8 NumPhysDisks; /* 0x24 */
- U8 Reserved2; /* 0x25 */
- U8 Reserved3; /* 0x26 */
- U8 InactiveStatus; /* 0x27 */
- MPI2_RAIDVOL0_PHYS_DISK PhysDisk[MPI2_RAID_VOL_PAGE_0_PHYSDISK_MAX]; /* 0x28 */
-} MPI2_CONFIG_PAGE_RAID_VOL_0, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_RAID_VOL_0,
- Mpi2RaidVolPage0_t, MPI2_POINTER pMpi2RaidVolPage0_t;
-
-#define MPI2_RAIDVOLPAGE0_PAGEVERSION (0x0A)
-
-/* values for RAID VolumeState */
-#define MPI2_RAID_VOL_STATE_MISSING (0x00)
-#define MPI2_RAID_VOL_STATE_FAILED (0x01)
-#define MPI2_RAID_VOL_STATE_INITIALIZING (0x02)
-#define MPI2_RAID_VOL_STATE_ONLINE (0x03)
-#define MPI2_RAID_VOL_STATE_DEGRADED (0x04)
-#define MPI2_RAID_VOL_STATE_OPTIMAL (0x05)
-
-/* values for RAID VolumeType */
-#define MPI2_RAID_VOL_TYPE_RAID0 (0x00)
-#define MPI2_RAID_VOL_TYPE_RAID1E (0x01)
-#define MPI2_RAID_VOL_TYPE_RAID1 (0x02)
-#define MPI2_RAID_VOL_TYPE_RAID10 (0x05)
-#define MPI2_RAID_VOL_TYPE_UNKNOWN (0xFF)
-
-/* values for RAID Volume Page 0 VolumeStatusFlags field */
-#define MPI2_RAIDVOL0_STATUS_FLAG_PENDING_RESYNC (0x02000000)
-#define MPI2_RAIDVOL0_STATUS_FLAG_BACKG_INIT_PENDING (0x01000000)
-#define MPI2_RAIDVOL0_STATUS_FLAG_MDC_PENDING (0x00800000)
-#define MPI2_RAIDVOL0_STATUS_FLAG_USER_CONSIST_PENDING (0x00400000)
-#define MPI2_RAIDVOL0_STATUS_FLAG_MAKE_DATA_CONSISTENT (0x00200000)
-#define MPI2_RAIDVOL0_STATUS_FLAG_DATA_SCRUB (0x00100000)
-#define MPI2_RAIDVOL0_STATUS_FLAG_CONSISTENCY_CHECK (0x00080000)
-#define MPI2_RAIDVOL0_STATUS_FLAG_CAPACITY_EXPANSION (0x00040000)
-#define MPI2_RAIDVOL0_STATUS_FLAG_BACKGROUND_INIT (0x00020000)
-#define MPI2_RAIDVOL0_STATUS_FLAG_RESYNC_IN_PROGRESS (0x00010000)
-#define MPI2_RAIDVOL0_STATUS_FLAG_VOL_NOT_CONSISTENT (0x00000080)
-#define MPI2_RAIDVOL0_STATUS_FLAG_OCE_ALLOWED (0x00000040)
-#define MPI2_RAIDVOL0_STATUS_FLAG_BGI_COMPLETE (0x00000020)
-#define MPI2_RAIDVOL0_STATUS_FLAG_1E_OFFSET_MIRROR (0x00000000)
-#define MPI2_RAIDVOL0_STATUS_FLAG_1E_ADJACENT_MIRROR (0x00000010)
-#define MPI2_RAIDVOL0_STATUS_FLAG_BAD_BLOCK_TABLE_FULL (0x00000008)
-#define MPI2_RAIDVOL0_STATUS_FLAG_VOLUME_INACTIVE (0x00000004)
-#define MPI2_RAIDVOL0_STATUS_FLAG_QUIESCED (0x00000002)
-#define MPI2_RAIDVOL0_STATUS_FLAG_ENABLED (0x00000001)
-
-/* values for RAID Volume Page 0 SupportedPhysDisks field */
-#define MPI2_RAIDVOL0_SUPPORT_SOLID_STATE_DISKS (0x08)
-#define MPI2_RAIDVOL0_SUPPORT_HARD_DISKS (0x04)
-#define MPI2_RAIDVOL0_SUPPORT_SAS_PROTOCOL (0x02)
-#define MPI2_RAIDVOL0_SUPPORT_SATA_PROTOCOL (0x01)
-
-/* values for RAID Volume Page 0 InactiveStatus field */
-#define MPI2_RAIDVOLPAGE0_UNKNOWN_INACTIVE (0x00)
-#define MPI2_RAIDVOLPAGE0_STALE_METADATA_INACTIVE (0x01)
-#define MPI2_RAIDVOLPAGE0_FOREIGN_VOLUME_INACTIVE (0x02)
-#define MPI2_RAIDVOLPAGE0_INSUFFICIENT_RESOURCE_INACTIVE (0x03)
-#define MPI2_RAIDVOLPAGE0_CLONE_VOLUME_INACTIVE (0x04)
-#define MPI2_RAIDVOLPAGE0_INSUFFICIENT_METADATA_INACTIVE (0x05)
-#define MPI2_RAIDVOLPAGE0_PREVIOUSLY_DELETED (0x06)
-
-
-/* RAID Volume Page 1 */
-
-typedef struct _MPI2_CONFIG_PAGE_RAID_VOL_1
-{
- MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */
- U16 DevHandle; /* 0x04 */
- U16 Reserved0; /* 0x06 */
- U8 GUID[24]; /* 0x08 */
- U8 Name[16]; /* 0x20 */
- U64 WWID; /* 0x30 */
- U32 Reserved1; /* 0x38 */
- U32 Reserved2; /* 0x3C */
-} MPI2_CONFIG_PAGE_RAID_VOL_1, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_RAID_VOL_1,
- Mpi2RaidVolPage1_t, MPI2_POINTER pMpi2RaidVolPage1_t;
-
-#define MPI2_RAIDVOLPAGE1_PAGEVERSION (0x03)
-
-
-/****************************************************************************
-* RAID Physical Disk Config Pages
-****************************************************************************/
-
-/* RAID Physical Disk Page 0 */
-
-typedef struct _MPI2_RAIDPHYSDISK0_SETTINGS
-{
- U16 Reserved1; /* 0x00 */
- U8 HotSparePool; /* 0x02 */
- U8 Reserved2; /* 0x03 */
-} MPI2_RAIDPHYSDISK0_SETTINGS, MPI2_POINTER PTR_MPI2_RAIDPHYSDISK0_SETTINGS,
- Mpi2RaidPhysDisk0Settings_t, MPI2_POINTER pMpi2RaidPhysDisk0Settings_t;
-
-/* use MPI2_RAID_HOT_SPARE_POOL_ defines for the HotSparePool field */
-
-typedef struct _MPI2_RAIDPHYSDISK0_INQUIRY_DATA
-{
- U8 VendorID[8]; /* 0x00 */
- U8 ProductID[16]; /* 0x08 */
- U8 ProductRevLevel[4]; /* 0x18 */
- U8 SerialNum[32]; /* 0x1C */
-} MPI2_RAIDPHYSDISK0_INQUIRY_DATA,
- MPI2_POINTER PTR_MPI2_RAIDPHYSDISK0_INQUIRY_DATA,
- Mpi2RaidPhysDisk0InquiryData_t, MPI2_POINTER pMpi2RaidPhysDisk0InquiryData_t;
-
-typedef struct _MPI2_CONFIG_PAGE_RD_PDISK_0
-{
- MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */
- U16 DevHandle; /* 0x04 */
- U8 Reserved1; /* 0x06 */
- U8 PhysDiskNum; /* 0x07 */
- MPI2_RAIDPHYSDISK0_SETTINGS PhysDiskSettings; /* 0x08 */
- U32 Reserved2; /* 0x0C */
- MPI2_RAIDPHYSDISK0_INQUIRY_DATA InquiryData; /* 0x10 */
- U32 Reserved3; /* 0x4C */
- U8 PhysDiskState; /* 0x50 */
- U8 OfflineReason; /* 0x51 */
- U8 IncompatibleReason; /* 0x52 */
- U8 PhysDiskAttributes; /* 0x53 */
- U32 PhysDiskStatusFlags; /* 0x54 */
- U64 DeviceMaxLBA; /* 0x58 */
- U64 HostMaxLBA; /* 0x60 */
- U64 CoercedMaxLBA; /* 0x68 */
- U16 BlockSize; /* 0x70 */
- U16 Reserved5; /* 0x72 */
- U32 Reserved6; /* 0x74 */
-} MPI2_CONFIG_PAGE_RD_PDISK_0,
- MPI2_POINTER PTR_MPI2_CONFIG_PAGE_RD_PDISK_0,
- Mpi2RaidPhysDiskPage0_t, MPI2_POINTER pMpi2RaidPhysDiskPage0_t;
-
-#define MPI2_RAIDPHYSDISKPAGE0_PAGEVERSION (0x05)
-
-/* PhysDiskState defines */
-#define MPI2_RAID_PD_STATE_NOT_CONFIGURED (0x00)
-#define MPI2_RAID_PD_STATE_NOT_COMPATIBLE (0x01)
-#define MPI2_RAID_PD_STATE_OFFLINE (0x02)
-#define MPI2_RAID_PD_STATE_ONLINE (0x03)
-#define MPI2_RAID_PD_STATE_HOT_SPARE (0x04)
-#define MPI2_RAID_PD_STATE_DEGRADED (0x05)
-#define MPI2_RAID_PD_STATE_REBUILDING (0x06)
-#define MPI2_RAID_PD_STATE_OPTIMAL (0x07)
-
-/* OfflineReason defines */
-#define MPI2_PHYSDISK0_ONLINE (0x00)
-#define MPI2_PHYSDISK0_OFFLINE_MISSING (0x01)
-#define MPI2_PHYSDISK0_OFFLINE_FAILED (0x03)
-#define MPI2_PHYSDISK0_OFFLINE_INITIALIZING (0x04)
-#define MPI2_PHYSDISK0_OFFLINE_REQUESTED (0x05)
-#define MPI2_PHYSDISK0_OFFLINE_FAILED_REQUESTED (0x06)
-#define MPI2_PHYSDISK0_OFFLINE_OTHER (0xFF)
-
-/* IncompatibleReason defines */
-#define MPI2_PHYSDISK0_COMPATIBLE (0x00)
-#define MPI2_PHYSDISK0_INCOMPATIBLE_PROTOCOL (0x01)
-#define MPI2_PHYSDISK0_INCOMPATIBLE_BLOCKSIZE (0x02)
-#define MPI2_PHYSDISK0_INCOMPATIBLE_MAX_LBA (0x03)
-#define MPI2_PHYSDISK0_INCOMPATIBLE_SATA_EXTENDED_CMD (0x04)
-#define MPI2_PHYSDISK0_INCOMPATIBLE_REMOVEABLE_MEDIA (0x05)
-#define MPI2_PHYSDISK0_INCOMPATIBLE_MEDIA_TYPE (0x06)
-#define MPI2_PHYSDISK0_INCOMPATIBLE_UNKNOWN (0xFF)
-
-/* PhysDiskAttributes defines */
-#define MPI2_PHYSDISK0_ATTRIB_MEDIA_MASK (0x0C)
-#define MPI2_PHYSDISK0_ATTRIB_SOLID_STATE_DRIVE (0x08)
-#define MPI2_PHYSDISK0_ATTRIB_HARD_DISK_DRIVE (0x04)
-
-#define MPI2_PHYSDISK0_ATTRIB_PROTOCOL_MASK (0x03)
-#define MPI2_PHYSDISK0_ATTRIB_SAS_PROTOCOL (0x02)
-#define MPI2_PHYSDISK0_ATTRIB_SATA_PROTOCOL (0x01)
-
-/* PhysDiskStatusFlags defines */
-#define MPI2_PHYSDISK0_STATUS_FLAG_NOT_CERTIFIED (0x00000040)
-#define MPI2_PHYSDISK0_STATUS_FLAG_OCE_TARGET (0x00000020)
-#define MPI2_PHYSDISK0_STATUS_FLAG_WRITE_CACHE_ENABLED (0x00000010)
-#define MPI2_PHYSDISK0_STATUS_FLAG_OPTIMAL_PREVIOUS (0x00000000)
-#define MPI2_PHYSDISK0_STATUS_FLAG_NOT_OPTIMAL_PREVIOUS (0x00000008)
-#define MPI2_PHYSDISK0_STATUS_FLAG_INACTIVE_VOLUME (0x00000004)
-#define MPI2_PHYSDISK0_STATUS_FLAG_QUIESCED (0x00000002)
-#define MPI2_PHYSDISK0_STATUS_FLAG_OUT_OF_SYNC (0x00000001)
-
-
-/* RAID Physical Disk Page 1 */
-
-/*
- * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
- * one and check the value returned for NumPhysDiskPaths at runtime.
- */
-#ifndef MPI2_RAID_PHYS_DISK1_PATH_MAX
-#define MPI2_RAID_PHYS_DISK1_PATH_MAX (1)
-#endif
-
-typedef struct _MPI2_RAIDPHYSDISK1_PATH
-{
- U16 DevHandle; /* 0x00 */
- U16 Reserved1; /* 0x02 */
- U64 WWID; /* 0x04 */
- U64 OwnerWWID; /* 0x0C */
- U8 OwnerIdentifier; /* 0x14 */
- U8 Reserved2; /* 0x15 */
- U16 Flags; /* 0x16 */
-} MPI2_RAIDPHYSDISK1_PATH, MPI2_POINTER PTR_MPI2_RAIDPHYSDISK1_PATH,
- Mpi2RaidPhysDisk1Path_t, MPI2_POINTER pMpi2RaidPhysDisk1Path_t;
-
-/* RAID Physical Disk Page 1 Physical Disk Path Flags field defines */
-#define MPI2_RAID_PHYSDISK1_FLAG_PRIMARY (0x0004)
-#define MPI2_RAID_PHYSDISK1_FLAG_BROKEN (0x0002)
-#define MPI2_RAID_PHYSDISK1_FLAG_INVALID (0x0001)
-
-typedef struct _MPI2_CONFIG_PAGE_RD_PDISK_1
-{
- MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */
- U8 NumPhysDiskPaths; /* 0x04 */
- U8 PhysDiskNum; /* 0x05 */
- U16 Reserved1; /* 0x06 */
- U32 Reserved2; /* 0x08 */
- MPI2_RAIDPHYSDISK1_PATH PhysicalDiskPath[MPI2_RAID_PHYS_DISK1_PATH_MAX];/* 0x0C */
-} MPI2_CONFIG_PAGE_RD_PDISK_1,
- MPI2_POINTER PTR_MPI2_CONFIG_PAGE_RD_PDISK_1,
- Mpi2RaidPhysDiskPage1_t, MPI2_POINTER pMpi2RaidPhysDiskPage1_t;
-
-#define MPI2_RAIDPHYSDISKPAGE1_PAGEVERSION (0x02)
-
-
-/****************************************************************************
-* values for fields used by several types of SAS Config Pages
-****************************************************************************/
-
-/* values for NegotiatedLinkRates fields */
-#define MPI2_SAS_NEG_LINK_RATE_MASK_LOGICAL (0xF0)
-#define MPI2_SAS_NEG_LINK_RATE_SHIFT_LOGICAL (4)
-#define MPI2_SAS_NEG_LINK_RATE_MASK_PHYSICAL (0x0F)
-/* link rates used for Negotiated Physical and Logical Link Rate */
-#define MPI2_SAS_NEG_LINK_RATE_UNKNOWN_LINK_RATE (0x00)
-#define MPI2_SAS_NEG_LINK_RATE_PHY_DISABLED (0x01)
-#define MPI2_SAS_NEG_LINK_RATE_NEGOTIATION_FAILED (0x02)
-#define MPI2_SAS_NEG_LINK_RATE_SATA_OOB_COMPLETE (0x03)
-#define MPI2_SAS_NEG_LINK_RATE_PORT_SELECTOR (0x04)
-#define MPI2_SAS_NEG_LINK_RATE_SMP_RESET_IN_PROGRESS (0x05)
-#define MPI2_SAS_NEG_LINK_RATE_UNSUPPORTED_PHY (0x06)
-#define MPI2_SAS_NEG_LINK_RATE_1_5 (0x08)
-#define MPI2_SAS_NEG_LINK_RATE_3_0 (0x09)
-#define MPI2_SAS_NEG_LINK_RATE_6_0 (0x0A)
-
-
-/* values for AttachedPhyInfo fields */
-#define MPI2_SAS_APHYINFO_INSIDE_ZPSDS_PERSISTENT (0x00000040)
-#define MPI2_SAS_APHYINFO_REQUESTED_INSIDE_ZPSDS (0x00000020)
-#define MPI2_SAS_APHYINFO_BREAK_REPLY_CAPABLE (0x00000010)
-
-#define MPI2_SAS_APHYINFO_REASON_MASK (0x0000000F)
-#define MPI2_SAS_APHYINFO_REASON_UNKNOWN (0x00000000)
-#define MPI2_SAS_APHYINFO_REASON_POWER_ON (0x00000001)
-#define MPI2_SAS_APHYINFO_REASON_HARD_RESET (0x00000002)
-#define MPI2_SAS_APHYINFO_REASON_SMP_PHY_CONTROL (0x00000003)
-#define MPI2_SAS_APHYINFO_REASON_LOSS_OF_SYNC (0x00000004)
-#define MPI2_SAS_APHYINFO_REASON_MULTIPLEXING_SEQ (0x00000005)
-#define MPI2_SAS_APHYINFO_REASON_IT_NEXUS_LOSS_TIMER (0x00000006)
-#define MPI2_SAS_APHYINFO_REASON_BREAK_TIMEOUT (0x00000007)
-#define MPI2_SAS_APHYINFO_REASON_PHY_TEST_STOPPED (0x00000008)
-
-
-/* values for PhyInfo fields */
-#define MPI2_SAS_PHYINFO_PHY_VACANT (0x80000000)
-
-#define MPI2_SAS_PHYINFO_PHY_POWER_CONDITION_MASK (0x18000000)
-#define MPI2_SAS_PHYINFO_SHIFT_PHY_POWER_CONDITION (27)
-#define MPI2_SAS_PHYINFO_PHY_POWER_ACTIVE (0x00000000)
-#define MPI2_SAS_PHYINFO_PHY_POWER_PARTIAL (0x08000000)
-#define MPI2_SAS_PHYINFO_PHY_POWER_SLUMBER (0x10000000)
-
-#define MPI2_SAS_PHYINFO_CHANGED_REQ_INSIDE_ZPSDS (0x04000000)
-#define MPI2_SAS_PHYINFO_INSIDE_ZPSDS_PERSISTENT (0x02000000)
-#define MPI2_SAS_PHYINFO_REQ_INSIDE_ZPSDS (0x01000000)
-#define MPI2_SAS_PHYINFO_ZONE_GROUP_PERSISTENT (0x00400000)
-#define MPI2_SAS_PHYINFO_INSIDE_ZPSDS (0x00200000)
-#define MPI2_SAS_PHYINFO_ZONING_ENABLED (0x00100000)
-
-#define MPI2_SAS_PHYINFO_REASON_MASK (0x000F0000)
-#define MPI2_SAS_PHYINFO_REASON_UNKNOWN (0x00000000)
-#define MPI2_SAS_PHYINFO_REASON_POWER_ON (0x00010000)
-#define MPI2_SAS_PHYINFO_REASON_HARD_RESET (0x00020000)
-#define MPI2_SAS_PHYINFO_REASON_SMP_PHY_CONTROL (0x00030000)
-#define MPI2_SAS_PHYINFO_REASON_LOSS_OF_SYNC (0x00040000)
-#define MPI2_SAS_PHYINFO_REASON_MULTIPLEXING_SEQ (0x00050000)
-#define MPI2_SAS_PHYINFO_REASON_IT_NEXUS_LOSS_TIMER (0x00060000)
-#define MPI2_SAS_PHYINFO_REASON_BREAK_TIMEOUT (0x00070000)
-#define MPI2_SAS_PHYINFO_REASON_PHY_TEST_STOPPED (0x00080000)
-
-#define MPI2_SAS_PHYINFO_MULTIPLEXING_SUPPORTED (0x00008000)
-#define MPI2_SAS_PHYINFO_SATA_PORT_ACTIVE (0x00004000)
-#define MPI2_SAS_PHYINFO_SATA_PORT_SELECTOR_PRESENT (0x00002000)
-#define MPI2_SAS_PHYINFO_VIRTUAL_PHY (0x00001000)
-
-#define MPI2_SAS_PHYINFO_MASK_PARTIAL_PATHWAY_TIME (0x00000F00)
-#define MPI2_SAS_PHYINFO_SHIFT_PARTIAL_PATHWAY_TIME (8)
-
-#define MPI2_SAS_PHYINFO_MASK_ROUTING_ATTRIBUTE (0x000000F0)
-#define MPI2_SAS_PHYINFO_DIRECT_ROUTING (0x00000000)
-#define MPI2_SAS_PHYINFO_SUBTRACTIVE_ROUTING (0x00000010)
-#define MPI2_SAS_PHYINFO_TABLE_ROUTING (0x00000020)
-
-
-/* values for SAS ProgrammedLinkRate fields */
-#define MPI2_SAS_PRATE_MAX_RATE_MASK (0xF0)
-#define MPI2_SAS_PRATE_MAX_RATE_NOT_PROGRAMMABLE (0x00)
-#define MPI2_SAS_PRATE_MAX_RATE_1_5 (0x80)
-#define MPI2_SAS_PRATE_MAX_RATE_3_0 (0x90)
-#define MPI2_SAS_PRATE_MAX_RATE_6_0 (0xA0)
-#define MPI25_SAS_PRATE_MAX_RATE_12_0 (0xB0)
-#define MPI2_SAS_PRATE_MIN_RATE_MASK (0x0F)
-#define MPI2_SAS_PRATE_MIN_RATE_NOT_PROGRAMMABLE (0x00)
-#define MPI2_SAS_PRATE_MIN_RATE_1_5 (0x08)
-#define MPI2_SAS_PRATE_MIN_RATE_3_0 (0x09)
-#define MPI2_SAS_PRATE_MIN_RATE_6_0 (0x0A)
-
-
-/* values for SAS HwLinkRate fields */
-#define MPI2_SAS_HWRATE_MAX_RATE_MASK (0xF0)
-#define MPI2_SAS_HWRATE_MAX_RATE_1_5 (0x80)
-#define MPI2_SAS_HWRATE_MAX_RATE_3_0 (0x90)
-#define MPI2_SAS_HWRATE_MAX_RATE_6_0 (0xA0)
-#define MPI25_SAS_HWRATE_MAX_RATE_12_0 (0xB0)
-#define MPI2_SAS_HWRATE_MIN_RATE_MASK (0x0F)
-#define MPI2_SAS_HWRATE_MIN_RATE_1_5 (0x08)
-#define MPI2_SAS_HWRATE_MIN_RATE_3_0 (0x09)
-#define MPI2_SAS_HWRATE_MIN_RATE_6_0 (0x0A)
-
-
-
-/****************************************************************************
-* SAS IO Unit Config Pages
-****************************************************************************/
-
-/* SAS IO Unit Page 0 */
-
-typedef struct _MPI2_SAS_IO_UNIT0_PHY_DATA
-{
- U8 Port; /* 0x00 */
- U8 PortFlags; /* 0x01 */
- U8 PhyFlags; /* 0x02 */
- U8 NegotiatedLinkRate; /* 0x03 */
- U32 ControllerPhyDeviceInfo;/* 0x04 */
- U16 AttachedDevHandle; /* 0x08 */
- U16 ControllerDevHandle; /* 0x0A */
- U32 DiscoveryStatus; /* 0x0C */
- U32 Reserved; /* 0x10 */
-} MPI2_SAS_IO_UNIT0_PHY_DATA, MPI2_POINTER PTR_MPI2_SAS_IO_UNIT0_PHY_DATA,
- Mpi2SasIOUnit0PhyData_t, MPI2_POINTER pMpi2SasIOUnit0PhyData_t;
-
-/*
- * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
- * one and check the value returned for NumPhys at runtime.
- */
-#ifndef MPI2_SAS_IOUNIT0_PHY_MAX
-#define MPI2_SAS_IOUNIT0_PHY_MAX (1)
-#endif
-
-typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT_0
-{
- MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */
- U32 Reserved1; /* 0x08 */
- U8 NumPhys; /* 0x0C */
- U8 Reserved2; /* 0x0D */
- U16 Reserved3; /* 0x0E */
- MPI2_SAS_IO_UNIT0_PHY_DATA PhyData[MPI2_SAS_IOUNIT0_PHY_MAX]; /* 0x10 */
-} MPI2_CONFIG_PAGE_SASIOUNIT_0,
- MPI2_POINTER PTR_MPI2_CONFIG_PAGE_SASIOUNIT_0,
- Mpi2SasIOUnitPage0_t, MPI2_POINTER pMpi2SasIOUnitPage0_t;
-
-#define MPI2_SASIOUNITPAGE0_PAGEVERSION (0x05)
-
-/* values for SAS IO Unit Page 0 PortFlags */
-#define MPI2_SASIOUNIT0_PORTFLAGS_DISCOVERY_IN_PROGRESS (0x08)
-#define MPI2_SASIOUNIT0_PORTFLAGS_AUTO_PORT_CONFIG (0x01)
-
-/* values for SAS IO Unit Page 0 PhyFlags */
-#define MPI2_SASIOUNIT0_PHYFLAGS_ZONING_ENABLED (0x10)
-#define MPI2_SASIOUNIT0_PHYFLAGS_PHY_DISABLED (0x08)
-
-/* use MPI2_SAS_NEG_LINK_RATE_ defines for the NegotiatedLinkRate field */
-
-/* see mpi2_sas.h for values for SAS IO Unit Page 0 ControllerPhyDeviceInfo values */
-
-/* values for SAS IO Unit Page 0 DiscoveryStatus */
-#define MPI2_SASIOUNIT0_DS_MAX_ENCLOSURES_EXCEED (0x80000000)
-#define MPI2_SASIOUNIT0_DS_MAX_EXPANDERS_EXCEED (0x40000000)
-#define MPI2_SASIOUNIT0_DS_MAX_DEVICES_EXCEED (0x20000000)
-#define MPI2_SASIOUNIT0_DS_MAX_TOPO_PHYS_EXCEED (0x10000000)
-#define MPI2_SASIOUNIT0_DS_DOWNSTREAM_INITIATOR (0x08000000)
-#define MPI2_SASIOUNIT0_DS_MULTI_SUBTRACTIVE_SUBTRACTIVE (0x00008000)
-#define MPI2_SASIOUNIT0_DS_EXP_MULTI_SUBTRACTIVE (0x00004000)
-#define MPI2_SASIOUNIT0_DS_MULTI_PORT_DOMAIN (0x00002000)
-#define MPI2_SASIOUNIT0_DS_TABLE_TO_SUBTRACTIVE_LINK (0x00001000)
-#define MPI2_SASIOUNIT0_DS_UNSUPPORTED_DEVICE (0x00000800)
-#define MPI2_SASIOUNIT0_DS_TABLE_LINK (0x00000400)
-#define MPI2_SASIOUNIT0_DS_SUBTRACTIVE_LINK (0x00000200)
-#define MPI2_SASIOUNIT0_DS_SMP_CRC_ERROR (0x00000100)
-#define MPI2_SASIOUNIT0_DS_SMP_FUNCTION_FAILED (0x00000080)
-#define MPI2_SASIOUNIT0_DS_INDEX_NOT_EXIST (0x00000040)
-#define MPI2_SASIOUNIT0_DS_OUT_ROUTE_ENTRIES (0x00000020)
-#define MPI2_SASIOUNIT0_DS_SMP_TIMEOUT (0x00000010)
-#define MPI2_SASIOUNIT0_DS_MULTIPLE_PORTS (0x00000004)
-#define MPI2_SASIOUNIT0_DS_UNADDRESSABLE_DEVICE (0x00000002)
-#define MPI2_SASIOUNIT0_DS_LOOP_DETECTED (0x00000001)
-
-
-/* SAS IO Unit Page 1 */
-
-typedef struct _MPI2_SAS_IO_UNIT1_PHY_DATA
-{
- U8 Port; /* 0x00 */
- U8 PortFlags; /* 0x01 */
- U8 PhyFlags; /* 0x02 */
- U8 MaxMinLinkRate; /* 0x03 */
- U32 ControllerPhyDeviceInfo; /* 0x04 */
- U16 MaxTargetPortConnectTime; /* 0x08 */
- U16 Reserved1; /* 0x0A */
-} MPI2_SAS_IO_UNIT1_PHY_DATA, MPI2_POINTER PTR_MPI2_SAS_IO_UNIT1_PHY_DATA,
- Mpi2SasIOUnit1PhyData_t, MPI2_POINTER pMpi2SasIOUnit1PhyData_t;
-
-/*
- * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
- * one and check the value returned for NumPhys at runtime.
- */
-#ifndef MPI2_SAS_IOUNIT1_PHY_MAX
-#define MPI2_SAS_IOUNIT1_PHY_MAX (1)
-#endif
-
-typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT_1
-{
- MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */
- U16 ControlFlags; /* 0x08 */
- U16 SASNarrowMaxQueueDepth; /* 0x0A */
- U16 AdditionalControlFlags; /* 0x0C */
- U16 SASWideMaxQueueDepth; /* 0x0E */
- U8 NumPhys; /* 0x10 */
- U8 SATAMaxQDepth; /* 0x11 */
- U8 ReportDeviceMissingDelay; /* 0x12 */
- U8 IODeviceMissingDelay; /* 0x13 */
- MPI2_SAS_IO_UNIT1_PHY_DATA PhyData[MPI2_SAS_IOUNIT1_PHY_MAX]; /* 0x14 */
-} MPI2_CONFIG_PAGE_SASIOUNIT_1,
- MPI2_POINTER PTR_MPI2_CONFIG_PAGE_SASIOUNIT_1,
- Mpi2SasIOUnitPage1_t, MPI2_POINTER pMpi2SasIOUnitPage1_t;
-
-#define MPI2_SASIOUNITPAGE1_PAGEVERSION (0x09)
-
-/* values for SAS IO Unit Page 1 ControlFlags */
-#define MPI2_SASIOUNIT1_CONTROL_DEVICE_SELF_TEST (0x8000)
-#define MPI2_SASIOUNIT1_CONTROL_SATA_3_0_MAX (0x4000)
-#define MPI2_SASIOUNIT1_CONTROL_SATA_1_5_MAX (0x2000)
-#define MPI2_SASIOUNIT1_CONTROL_SATA_SW_PRESERVE (0x1000)
-
-#define MPI2_SASIOUNIT1_CONTROL_MASK_DEV_SUPPORT (0x0600)
-#define MPI2_SASIOUNIT1_CONTROL_SHIFT_DEV_SUPPORT (9)
-#define MPI2_SASIOUNIT1_CONTROL_DEV_SUPPORT_BOTH (0x0)
-#define MPI2_SASIOUNIT1_CONTROL_DEV_SAS_SUPPORT (0x1)
-#define MPI2_SASIOUNIT1_CONTROL_DEV_SATA_SUPPORT (0x2)
-
-#define MPI2_SASIOUNIT1_CONTROL_SATA_48BIT_LBA_REQUIRED (0x0080)
-#define MPI2_SASIOUNIT1_CONTROL_SATA_SMART_REQUIRED (0x0040)
-#define MPI2_SASIOUNIT1_CONTROL_SATA_NCQ_REQUIRED (0x0020)
-#define MPI2_SASIOUNIT1_CONTROL_SATA_FUA_REQUIRED (0x0010)
-#define MPI2_SASIOUNIT1_CONTROL_TABLE_SUBTRACTIVE_ILLEGAL (0x0008)
-#define MPI2_SASIOUNIT1_CONTROL_SUBTRACTIVE_ILLEGAL (0x0004)
-#define MPI2_SASIOUNIT1_CONTROL_FIRST_LVL_DISC_ONLY (0x0002)
-#define MPI2_SASIOUNIT1_CONTROL_CLEAR_AFFILIATION (0x0001)
-
-/* values for SAS IO Unit Page 1 AdditionalControlFlags */
-#define MPI2_SASIOUNIT1_ACONTROL_MULTI_PORT_DOMAIN_ILLEGAL (0x0080)
-#define MPI2_SASIOUNIT1_ACONTROL_SATA_ASYNCHROUNOUS_NOTIFICATION (0x0040)
-#define MPI2_SASIOUNIT1_ACONTROL_INVALID_TOPOLOGY_CORRECTION (0x0020)
-#define MPI2_SASIOUNIT1_ACONTROL_PORT_ENABLE_ONLY_SATA_LINK_RESET (0x0010)
-#define MPI2_SASIOUNIT1_ACONTROL_OTHER_AFFILIATION_SATA_LINK_RESET (0x0008)
-#define MPI2_SASIOUNIT1_ACONTROL_SELF_AFFILIATION_SATA_LINK_RESET (0x0004)
-#define MPI2_SASIOUNIT1_ACONTROL_NO_AFFILIATION_SATA_LINK_RESET (0x0002)
-#define MPI2_SASIOUNIT1_ACONTROL_ALLOW_TABLE_TO_TABLE (0x0001)
-
-/* defines for SAS IO Unit Page 1 ReportDeviceMissingDelay */
-#define MPI2_SASIOUNIT1_REPORT_MISSING_TIMEOUT_MASK (0x7F)
-#define MPI2_SASIOUNIT1_REPORT_MISSING_UNIT_16 (0x80)
-
-/* values for SAS IO Unit Page 1 PortFlags */
-#define MPI2_SASIOUNIT1_PORT_FLAGS_AUTO_PORT_CONFIG (0x01)
-
-/* values for SAS IO Unit Page 1 PhyFlags */
-#define MPI2_SASIOUNIT1_PHYFLAGS_ZONING_ENABLE (0x10)
-#define MPI2_SASIOUNIT1_PHYFLAGS_PHY_DISABLE (0x08)
-
-/* values for SAS IO Unit Page 1 MaxMinLinkRate */
-#define MPI2_SASIOUNIT1_MAX_RATE_MASK (0xF0)
-#define MPI2_SASIOUNIT1_MAX_RATE_1_5 (0x80)
-#define MPI2_SASIOUNIT1_MAX_RATE_3_0 (0x90)
-#define MPI2_SASIOUNIT1_MAX_RATE_6_0 (0xA0)
-#define MPI2_SASIOUNIT1_MIN_RATE_MASK (0x0F)
-#define MPI2_SASIOUNIT1_MIN_RATE_1_5 (0x08)
-#define MPI2_SASIOUNIT1_MIN_RATE_3_0 (0x09)
-#define MPI2_SASIOUNIT1_MIN_RATE_6_0 (0x0A)
-
-/* see mpi2_sas.h for values for SAS IO Unit Page 1 ControllerPhyDeviceInfo values */
-
-
-/* SAS IO Unit Page 4 */
-
-typedef struct _MPI2_SAS_IOUNIT4_SPINUP_GROUP
-{
- U8 MaxTargetSpinup; /* 0x00 */
- U8 SpinupDelay; /* 0x01 */
- U8 SpinupFlags; /* 0x02 */
- U8 Reserved1; /* 0x03 */
-} MPI2_SAS_IOUNIT4_SPINUP_GROUP, MPI2_POINTER PTR_MPI2_SAS_IOUNIT4_SPINUP_GROUP,
- Mpi2SasIOUnit4SpinupGroup_t, MPI2_POINTER pMpi2SasIOUnit4SpinupGroup_t;
-
-/* defines for SAS IO Unit Page 4 SpinupFlags */
-#define MPI2_SASIOUNIT4_SPINUP_DISABLE_FLAG (0x01)
-
-/*
- * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
- * one and check the value returned for NumPhys at runtime.
- */
-#ifndef MPI2_SAS_IOUNIT4_PHY_MAX
-#define MPI2_SAS_IOUNIT4_PHY_MAX (4)
-#endif
-
-typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT_4
-{
- MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */
- MPI2_SAS_IOUNIT4_SPINUP_GROUP SpinupGroupParameters[4]; /* 0x08 */
- U32 Reserved1; /* 0x18 */
- U32 Reserved2; /* 0x1C */
- U32 Reserved3; /* 0x20 */
- U8 BootDeviceWaitTime; /* 0x24 */
- U8 Reserved4; /* 0x25 */
- U16 Reserved5; /* 0x26 */
- U8 NumPhys; /* 0x28 */
- U8 PEInitialSpinupDelay; /* 0x29 */
- U8 PEReplyDelay; /* 0x2A */
- U8 Flags; /* 0x2B */
- U8 PHY[MPI2_SAS_IOUNIT4_PHY_MAX]; /* 0x2C */
-} MPI2_CONFIG_PAGE_SASIOUNIT_4,
- MPI2_POINTER PTR_MPI2_CONFIG_PAGE_SASIOUNIT_4,
- Mpi2SasIOUnitPage4_t, MPI2_POINTER pMpi2SasIOUnitPage4_t;
-
-#define MPI2_SASIOUNITPAGE4_PAGEVERSION (0x02)
-
-/* defines for Flags field */
-#define MPI2_SASIOUNIT4_FLAGS_AUTO_PORTENABLE (0x01)
-
-/* defines for PHY field */
-#define MPI2_SASIOUNIT4_PHY_SPINUP_GROUP_MASK (0x03)
-
-
-/* SAS IO Unit Page 5 */
-
-typedef struct _MPI2_SAS_IO_UNIT5_PHY_PM_SETTINGS {
- U8 ControlFlags; /* 0x00 */
- U8 PortWidthModGroup; /* 0x01 */
- U16 InactivityTimerExponent; /* 0x02 */
- U8 SATAPartialTimeout; /* 0x04 */
- U8 Reserved2; /* 0x05 */
- U8 SATASlumberTimeout; /* 0x06 */
- U8 Reserved3; /* 0x07 */
- U8 SASPartialTimeout; /* 0x08 */
- U8 Reserved4; /* 0x09 */
- U8 SASSlumberTimeout; /* 0x0A */
- U8 Reserved5; /* 0x0B */
-} MPI2_SAS_IO_UNIT5_PHY_PM_SETTINGS,
- MPI2_POINTER PTR_MPI2_SAS_IO_UNIT5_PHY_PM_SETTINGS,
- Mpi2SasIOUnit5PhyPmSettings_t, MPI2_POINTER pMpi2SasIOUnit5PhyPmSettings_t;
-
-/* defines for ControlFlags field */
-#define MPI2_SASIOUNIT5_CONTROL_SAS_SLUMBER_ENABLE (0x08)
-#define MPI2_SASIOUNIT5_CONTROL_SAS_PARTIAL_ENABLE (0x04)
-#define MPI2_SASIOUNIT5_CONTROL_SATA_SLUMBER_ENABLE (0x02)
-#define MPI2_SASIOUNIT5_CONTROL_SATA_PARTIAL_ENABLE (0x01)
-
-/* defines for PortWidthModeGroup field */
-#define MPI2_SASIOUNIT5_PWMG_DISABLE (0xFF)
-
-/* defines for InactivityTimerExponent field */
-#define MPI2_SASIOUNIT5_ITE_MASK_SAS_SLUMBER (0x7000)
-#define MPI2_SASIOUNIT5_ITE_SHIFT_SAS_SLUMBER (12)
-#define MPI2_SASIOUNIT5_ITE_MASK_SAS_PARTIAL (0x0700)
-#define MPI2_SASIOUNIT5_ITE_SHIFT_SAS_PARTIAL (8)
-#define MPI2_SASIOUNIT5_ITE_MASK_SATA_SLUMBER (0x0070)
-#define MPI2_SASIOUNIT5_ITE_SHIFT_SATA_SLUMBER (4)
-#define MPI2_SASIOUNIT5_ITE_MASK_SATA_PARTIAL (0x0007)
-#define MPI2_SASIOUNIT5_ITE_SHIFT_SATA_PARTIAL (0)
-
-#define MPI2_SASIOUNIT5_ITE_TEN_SECONDS (7)
-#define MPI2_SASIOUNIT5_ITE_ONE_SECOND (6)
-#define MPI2_SASIOUNIT5_ITE_HUNDRED_MILLISECONDS (5)
-#define MPI2_SASIOUNIT5_ITE_TEN_MILLISECONDS (4)
-#define MPI2_SASIOUNIT5_ITE_ONE_MILLISECOND (3)
-#define MPI2_SASIOUNIT5_ITE_HUNDRED_MICROSECONDS (2)
-#define MPI2_SASIOUNIT5_ITE_TEN_MICROSECONDS (1)
-#define MPI2_SASIOUNIT5_ITE_ONE_MICROSECOND (0)
-
-/*
- * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
- * one and check the value returned for NumPhys at runtime.
- */
-#ifndef MPI2_SAS_IOUNIT5_PHY_MAX
-#define MPI2_SAS_IOUNIT5_PHY_MAX (1)
-#endif
-
-typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT_5 {
- MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */
- U8 NumPhys; /* 0x08 */
- U8 Reserved1; /* 0x09 */
- U16 Reserved2; /* 0x0A */
- U32 Reserved3; /* 0x0C */
- MPI2_SAS_IO_UNIT5_PHY_PM_SETTINGS SASPhyPowerManagementSettings
- [MPI2_SAS_IOUNIT5_PHY_MAX]; /* 0x10 */
-} MPI2_CONFIG_PAGE_SASIOUNIT_5,
- MPI2_POINTER PTR_MPI2_CONFIG_PAGE_SASIOUNIT_5,
- Mpi2SasIOUnitPage5_t, MPI2_POINTER pMpi2SasIOUnitPage5_t;
-
-#define MPI2_SASIOUNITPAGE5_PAGEVERSION (0x01)
-
-
-/* SAS IO Unit Page 6 */
-
-typedef struct _MPI2_SAS_IO_UNIT6_PORT_WIDTH_MOD_GROUP_STATUS {
- U8 CurrentStatus; /* 0x00 */
- U8 CurrentModulation; /* 0x01 */
- U8 CurrentUtilization; /* 0x02 */
- U8 Reserved1; /* 0x03 */
- U32 Reserved2; /* 0x04 */
-} MPI2_SAS_IO_UNIT6_PORT_WIDTH_MOD_GROUP_STATUS,
- MPI2_POINTER PTR_MPI2_SAS_IO_UNIT6_PORT_WIDTH_MOD_GROUP_STATUS,
- Mpi2SasIOUnit6PortWidthModGroupStatus_t,
- MPI2_POINTER pMpi2SasIOUnit6PortWidthModGroupStatus_t;
-
-/* defines for CurrentStatus field */
-#define MPI2_SASIOUNIT6_STATUS_UNAVAILABLE (0x00)
-#define MPI2_SASIOUNIT6_STATUS_UNCONFIGURED (0x01)
-#define MPI2_SASIOUNIT6_STATUS_INVALID_CONFIG (0x02)
-#define MPI2_SASIOUNIT6_STATUS_LINK_DOWN (0x03)
-#define MPI2_SASIOUNIT6_STATUS_OBSERVATION_ONLY (0x04)
-#define MPI2_SASIOUNIT6_STATUS_INACTIVE (0x05)
-#define MPI2_SASIOUNIT6_STATUS_ACTIVE_IOUNIT (0x06)
-#define MPI2_SASIOUNIT6_STATUS_ACTIVE_HOST (0x07)
-
-/* defines for CurrentModulation field */
-#define MPI2_SASIOUNIT6_MODULATION_25_PERCENT (0x00)
-#define MPI2_SASIOUNIT6_MODULATION_50_PERCENT (0x01)
-#define MPI2_SASIOUNIT6_MODULATION_75_PERCENT (0x02)
-#define MPI2_SASIOUNIT6_MODULATION_100_PERCENT (0x03)
-
-/*
- * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
- * one and check the value returned for NumGroups at runtime.
- */
-#ifndef MPI2_SAS_IOUNIT6_GROUP_MAX
-#define MPI2_SAS_IOUNIT6_GROUP_MAX (1)
-#endif
-
-typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT_6 {
- MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */
- U32 Reserved1; /* 0x08 */
- U32 Reserved2; /* 0x0C */
- U8 NumGroups; /* 0x10 */
- U8 Reserved3; /* 0x11 */
- U16 Reserved4; /* 0x12 */
- MPI2_SAS_IO_UNIT6_PORT_WIDTH_MOD_GROUP_STATUS
- PortWidthModulationGroupStatus[MPI2_SAS_IOUNIT6_GROUP_MAX]; /* 0x14 */
-} MPI2_CONFIG_PAGE_SASIOUNIT_6,
- MPI2_POINTER PTR_MPI2_CONFIG_PAGE_SASIOUNIT_6,
- Mpi2SasIOUnitPage6_t, MPI2_POINTER pMpi2SasIOUnitPage6_t;
-
-#define MPI2_SASIOUNITPAGE6_PAGEVERSION (0x00)
-
-
-/* SAS IO Unit Page 7 */
-
-typedef struct _MPI2_SAS_IO_UNIT7_PORT_WIDTH_MOD_GROUP_SETTINGS {
- U8 Flags; /* 0x00 */
- U8 Reserved1; /* 0x01 */
- U16 Reserved2; /* 0x02 */
- U8 Threshold75Pct; /* 0x04 */
- U8 Threshold50Pct; /* 0x05 */
- U8 Threshold25Pct; /* 0x06 */
- U8 Reserved3; /* 0x07 */
-} MPI2_SAS_IO_UNIT7_PORT_WIDTH_MOD_GROUP_SETTINGS,
- MPI2_POINTER PTR_MPI2_SAS_IO_UNIT7_PORT_WIDTH_MOD_GROUP_SETTINGS,
- Mpi2SasIOUnit7PortWidthModGroupSettings_t,
- MPI2_POINTER pMpi2SasIOUnit7PortWidthModGroupSettings_t;
-
-/* defines for Flags field */
-#define MPI2_SASIOUNIT7_FLAGS_ENABLE_PORT_WIDTH_MODULATION (0x01)
-
-
-/*
- * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
- * one and check the value returned for NumGroups at runtime.
- */
-#ifndef MPI2_SAS_IOUNIT7_GROUP_MAX
-#define MPI2_SAS_IOUNIT7_GROUP_MAX (1)
-#endif
-
-typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT_7 {
- MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */
- U8 SamplingInterval; /* 0x08 */
- U8 WindowLength; /* 0x09 */
- U16 Reserved1; /* 0x0A */
- U32 Reserved2; /* 0x0C */
- U32 Reserved3; /* 0x10 */
- U8 NumGroups; /* 0x14 */
- U8 Reserved4; /* 0x15 */
- U16 Reserved5; /* 0x16 */
- MPI2_SAS_IO_UNIT7_PORT_WIDTH_MOD_GROUP_SETTINGS
- PortWidthModulationGroupSettings[MPI2_SAS_IOUNIT7_GROUP_MAX]; /* 0x18 */
-} MPI2_CONFIG_PAGE_SASIOUNIT_7,
- MPI2_POINTER PTR_MPI2_CONFIG_PAGE_SASIOUNIT_7,
- Mpi2SasIOUnitPage7_t, MPI2_POINTER pMpi2SasIOUnitPage7_t;
-
-#define MPI2_SASIOUNITPAGE7_PAGEVERSION (0x00)
-
-
-/* SAS IO Unit Page 8 */
-
-typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT_8 {
- MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */
- U32 Reserved1; /* 0x08 */
- U32 PowerManagementCapabilities;/* 0x0C */
- U32 Reserved2; /* 0x10 */
-} MPI2_CONFIG_PAGE_SASIOUNIT_8,
- MPI2_POINTER PTR_MPI2_CONFIG_PAGE_SASIOUNIT_8,
- Mpi2SasIOUnitPage8_t, MPI2_POINTER pMpi2SasIOUnitPage8_t;
-
-#define MPI2_SASIOUNITPAGE8_PAGEVERSION (0x00)
-
-/* defines for PowerManagementCapabilities field */
-#define MPI2_SASIOUNIT8_PM_HOST_PORT_WIDTH_MOD (0x00001000)
-#define MPI2_SASIOUNIT8_PM_HOST_SAS_SLUMBER_MODE (0x00000800)
-#define MPI2_SASIOUNIT8_PM_HOST_SAS_PARTIAL_MODE (0x00000400)
-#define MPI2_SASIOUNIT8_PM_HOST_SATA_SLUMBER_MODE (0x00000200)
-#define MPI2_SASIOUNIT8_PM_HOST_SATA_PARTIAL_MODE (0x00000100)
-#define MPI2_SASIOUNIT8_PM_IOUNIT_PORT_WIDTH_MOD (0x00000010)
-#define MPI2_SASIOUNIT8_PM_IOUNIT_SAS_SLUMBER_MODE (0x00000008)
-#define MPI2_SASIOUNIT8_PM_IOUNIT_SAS_PARTIAL_MODE (0x00000004)
-#define MPI2_SASIOUNIT8_PM_IOUNIT_SATA_SLUMBER_MODE (0x00000002)
-#define MPI2_SASIOUNIT8_PM_IOUNIT_SATA_PARTIAL_MODE (0x00000001)
-
-
-
-/* SAS IO Unit Page 16 */
-
-typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT16 {
- MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */
- U64 TimeStamp; /* 0x08 */
- U32 Reserved1; /* 0x10 */
- U32 Reserved2; /* 0x14 */
- U32 FastPathPendedRequests; /* 0x18 */
- U32 FastPathUnPendedRequests; /* 0x1C */
- U32 FastPathHostRequestStarts; /* 0x20 */
- U32 FastPathFirmwareRequestStarts; /* 0x24 */
- U32 FastPathHostCompletions; /* 0x28 */
- U32 FastPathFirmwareCompletions; /* 0x2C */
- U32 NonFastPathRequestStarts; /* 0x30 */
- U32 NonFastPathHostCompletions; /* 0x30 */
-} MPI2_CONFIG_PAGE_SASIOUNIT16,
-MPI2_POINTER PTR_MPI2_CONFIG_PAGE_SASIOUNIT16,
-Mpi2SasIOUnitPage16_t, MPI2_POINTER pMpi2SasIOUnitPage16_t;
-
-#define MPI2_SASIOUNITPAGE16_PAGEVERSION (0x00)
-
-
-/****************************************************************************
-* SAS Expander Config Pages
-****************************************************************************/
-
-/* SAS Expander Page 0 */
-
-typedef struct _MPI2_CONFIG_PAGE_EXPANDER_0
-{
- MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */
- U8 PhysicalPort; /* 0x08 */
- U8 ReportGenLength; /* 0x09 */
- U16 EnclosureHandle; /* 0x0A */
- U64 SASAddress; /* 0x0C */
- U32 DiscoveryStatus; /* 0x14 */
- U16 DevHandle; /* 0x18 */
- U16 ParentDevHandle; /* 0x1A */
- U16 ExpanderChangeCount; /* 0x1C */
- U16 ExpanderRouteIndexes; /* 0x1E */
- U8 NumPhys; /* 0x20 */
- U8 SASLevel; /* 0x21 */
- U16 Flags; /* 0x22 */
- U16 STPBusInactivityTimeLimit; /* 0x24 */
- U16 STPMaxConnectTimeLimit; /* 0x26 */
- U16 STP_SMP_NexusLossTime; /* 0x28 */
- U16 MaxNumRoutedSasAddresses; /* 0x2A */
- U64 ActiveZoneManagerSASAddress;/* 0x2C */
- U16 ZoneLockInactivityLimit; /* 0x34 */
- U16 Reserved1; /* 0x36 */
- U8 TimeToReducedFunc; /* 0x38 */
- U8 InitialTimeToReducedFunc; /* 0x39 */
- U8 MaxReducedFuncTime; /* 0x3A */
- U8 Reserved2; /* 0x3B */
-} MPI2_CONFIG_PAGE_EXPANDER_0, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_EXPANDER_0,
- Mpi2ExpanderPage0_t, MPI2_POINTER pMpi2ExpanderPage0_t;
-
-#define MPI2_SASEXPANDER0_PAGEVERSION (0x06)
-
-/* values for SAS Expander Page 0 DiscoveryStatus field */
-#define MPI2_SAS_EXPANDER0_DS_MAX_ENCLOSURES_EXCEED (0x80000000)
-#define MPI2_SAS_EXPANDER0_DS_MAX_EXPANDERS_EXCEED (0x40000000)
-#define MPI2_SAS_EXPANDER0_DS_MAX_DEVICES_EXCEED (0x20000000)
-#define MPI2_SAS_EXPANDER0_DS_MAX_TOPO_PHYS_EXCEED (0x10000000)
-#define MPI2_SAS_EXPANDER0_DS_DOWNSTREAM_INITIATOR (0x08000000)
-#define MPI2_SAS_EXPANDER0_DS_MULTI_SUBTRACTIVE_SUBTRACTIVE (0x00008000)
-#define MPI2_SAS_EXPANDER0_DS_EXP_MULTI_SUBTRACTIVE (0x00004000)
-#define MPI2_SAS_EXPANDER0_DS_MULTI_PORT_DOMAIN (0x00002000)
-#define MPI2_SAS_EXPANDER0_DS_TABLE_TO_SUBTRACTIVE_LINK (0x00001000)
-#define MPI2_SAS_EXPANDER0_DS_UNSUPPORTED_DEVICE (0x00000800)
-#define MPI2_SAS_EXPANDER0_DS_TABLE_LINK (0x00000400)
-#define MPI2_SAS_EXPANDER0_DS_SUBTRACTIVE_LINK (0x00000200)
-#define MPI2_SAS_EXPANDER0_DS_SMP_CRC_ERROR (0x00000100)
-#define MPI2_SAS_EXPANDER0_DS_SMP_FUNCTION_FAILED (0x00000080)
-#define MPI2_SAS_EXPANDER0_DS_INDEX_NOT_EXIST (0x00000040)
-#define MPI2_SAS_EXPANDER0_DS_OUT_ROUTE_ENTRIES (0x00000020)
-#define MPI2_SAS_EXPANDER0_DS_SMP_TIMEOUT (0x00000010)
-#define MPI2_SAS_EXPANDER0_DS_MULTIPLE_PORTS (0x00000004)
-#define MPI2_SAS_EXPANDER0_DS_UNADDRESSABLE_DEVICE (0x00000002)
-#define MPI2_SAS_EXPANDER0_DS_LOOP_DETECTED (0x00000001)
-
-/* values for SAS Expander Page 0 Flags field */
-#define MPI2_SAS_EXPANDER0_FLAGS_REDUCED_FUNCTIONALITY (0x2000)
-#define MPI2_SAS_EXPANDER0_FLAGS_ZONE_LOCKED (0x1000)
-#define MPI2_SAS_EXPANDER0_FLAGS_SUPPORTED_PHYSICAL_PRES (0x0800)
-#define MPI2_SAS_EXPANDER0_FLAGS_ASSERTED_PHYSICAL_PRES (0x0400)
-#define MPI2_SAS_EXPANDER0_FLAGS_ZONING_SUPPORT (0x0200)
-#define MPI2_SAS_EXPANDER0_FLAGS_ENABLED_ZONING (0x0100)
-#define MPI2_SAS_EXPANDER0_FLAGS_TABLE_TO_TABLE_SUPPORT (0x0080)
-#define MPI2_SAS_EXPANDER0_FLAGS_CONNECTOR_END_DEVICE (0x0010)
-#define MPI2_SAS_EXPANDER0_FLAGS_OTHERS_CONFIG (0x0004)
-#define MPI2_SAS_EXPANDER0_FLAGS_CONFIG_IN_PROGRESS (0x0002)
-#define MPI2_SAS_EXPANDER0_FLAGS_ROUTE_TABLE_CONFIG (0x0001)
-
-
-/* SAS Expander Page 1 */
-
-typedef struct _MPI2_CONFIG_PAGE_EXPANDER_1
-{
- MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */
- U8 PhysicalPort; /* 0x08 */
- U8 Reserved1; /* 0x09 */
- U16 Reserved2; /* 0x0A */
- U8 NumPhys; /* 0x0C */
- U8 Phy; /* 0x0D */
- U16 NumTableEntriesProgrammed; /* 0x0E */
- U8 ProgrammedLinkRate; /* 0x10 */
- U8 HwLinkRate; /* 0x11 */
- U16 AttachedDevHandle; /* 0x12 */
- U32 PhyInfo; /* 0x14 */
- U32 AttachedDeviceInfo; /* 0x18 */
- U16 ExpanderDevHandle; /* 0x1C */
- U8 ChangeCount; /* 0x1E */
- U8 NegotiatedLinkRate; /* 0x1F */
- U8 PhyIdentifier; /* 0x20 */
- U8 AttachedPhyIdentifier; /* 0x21 */
- U8 Reserved3; /* 0x22 */
- U8 DiscoveryInfo; /* 0x23 */
- U32 AttachedPhyInfo; /* 0x24 */
- U8 ZoneGroup; /* 0x28 */
- U8 SelfConfigStatus; /* 0x29 */
- U16 Reserved4; /* 0x2A */
-} MPI2_CONFIG_PAGE_EXPANDER_1, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_EXPANDER_1,
- Mpi2ExpanderPage1_t, MPI2_POINTER pMpi2ExpanderPage1_t;
-
-#define MPI2_SASEXPANDER1_PAGEVERSION (0x02)
-
-/* use MPI2_SAS_PRATE_ defines for the ProgrammedLinkRate field */
-
-/* use MPI2_SAS_HWRATE_ defines for the HwLinkRate field */
-
-/* use MPI2_SAS_PHYINFO_ for the PhyInfo field */
-
-/* see mpi2_sas.h for the MPI2_SAS_DEVICE_INFO_ defines used for the AttachedDeviceInfo field */
-
-/* use MPI2_SAS_NEG_LINK_RATE_ defines for the NegotiatedLinkRate field */
-
-/* values for SAS Expander Page 1 DiscoveryInfo field */
-#define MPI2_SAS_EXPANDER1_DISCINFO_BAD_PHY_DISABLED (0x04)
-#define MPI2_SAS_EXPANDER1_DISCINFO_LINK_STATUS_CHANGE (0x02)
-#define MPI2_SAS_EXPANDER1_DISCINFO_NO_ROUTING_ENTRIES (0x01)
-
-/* use MPI2_SAS_APHYINFO_ defines for AttachedPhyInfo field */
-
-/****************************************************************************
-* SAS Device Config Pages
-****************************************************************************/
-
-/* SAS Device Page 0 */
-
-typedef struct _MPI2_CONFIG_PAGE_SAS_DEV_0
-{
- MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */
- U16 Slot; /* 0x08 */
- U16 EnclosureHandle; /* 0x0A */
- U64 SASAddress; /* 0x0C */
- U16 ParentDevHandle; /* 0x14 */
- U8 PhyNum; /* 0x16 */
- U8 AccessStatus; /* 0x17 */
- U16 DevHandle; /* 0x18 */
- U8 AttachedPhyIdentifier; /* 0x1A */
- U8 ZoneGroup; /* 0x1B */
- U32 DeviceInfo; /* 0x1C */
- U16 Flags; /* 0x20 */
- U8 PhysicalPort; /* 0x22 */
- U8 MaxPortConnections; /* 0x23 */
- U64 DeviceName; /* 0x24 */
- U8 PortGroups; /* 0x2C */
- U8 DmaGroup; /* 0x2D */
- U8 ControlGroup; /* 0x2E */
- U8 EnclosureLevel; /* 0x2F */
- U8 ConnectorName[4]; /* 0x30 */
- U32 Reserved3; /* 0x34 */
-} MPI2_CONFIG_PAGE_SAS_DEV_0, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_SAS_DEV_0,
- Mpi2SasDevicePage0_t, MPI2_POINTER pMpi2SasDevicePage0_t;
-
-#define MPI2_SASDEVICE0_PAGEVERSION (0x09)
-
-/* values for SAS Device Page 0 AccessStatus field */
-#define MPI2_SAS_DEVICE0_ASTATUS_NO_ERRORS (0x00)
-#define MPI2_SAS_DEVICE0_ASTATUS_SATA_INIT_FAILED (0x01)
-#define MPI2_SAS_DEVICE0_ASTATUS_SATA_CAPABILITY_FAILED (0x02)
-#define MPI2_SAS_DEVICE0_ASTATUS_SATA_AFFILIATION_CONFLICT (0x03)
-#define MPI2_SAS_DEVICE0_ASTATUS_SATA_NEEDS_INITIALIZATION (0x04)
-#define MPI2_SAS_DEVICE0_ASTATUS_ROUTE_NOT_ADDRESSABLE (0x05)
-#define MPI2_SAS_DEVICE0_ASTATUS_SMP_ERROR_NOT_ADDRESSABLE (0x06)
-#define MPI2_SAS_DEVICE0_ASTATUS_DEVICE_BLOCKED (0x07)
-/* specific values for SATA Init failures */
-#define MPI2_SAS_DEVICE0_ASTATUS_SIF_UNKNOWN (0x10)
-#define MPI2_SAS_DEVICE0_ASTATUS_SIF_AFFILIATION_CONFLICT (0x11)
-#define MPI2_SAS_DEVICE0_ASTATUS_SIF_DIAG (0x12)
-#define MPI2_SAS_DEVICE0_ASTATUS_SIF_IDENTIFICATION (0x13)
-#define MPI2_SAS_DEVICE0_ASTATUS_SIF_CHECK_POWER (0x14)
-#define MPI2_SAS_DEVICE0_ASTATUS_SIF_PIO_SN (0x15)
-#define MPI2_SAS_DEVICE0_ASTATUS_SIF_MDMA_SN (0x16)
-#define MPI2_SAS_DEVICE0_ASTATUS_SIF_UDMA_SN (0x17)
-#define MPI2_SAS_DEVICE0_ASTATUS_SIF_ZONING_VIOLATION (0x18)
-#define MPI2_SAS_DEVICE0_ASTATUS_SIF_NOT_ADDRESSABLE (0x19)
-#define MPI2_SAS_DEVICE0_ASTATUS_SIF_MAX (0x1F)
-
-/* see mpi2_sas.h for values for SAS Device Page 0 DeviceInfo values */
-
-/* values for SAS Device Page 0 Flags field */
-#define MPI2_SAS_DEVICE0_FLAGS_UNAUTHORIZED_DEVICE (0x8000)
-#define MPI2_SAS_DEVICE0_FLAGS_SLUMBER_PM_CAPABLE (0x1000)
-#define MPI2_SAS_DEVICE0_FLAGS_PARTIAL_PM_CAPABLE (0x0800)
-#define MPI2_SAS_DEVICE0_FLAGS_SATA_ASYNCHRONOUS_NOTIFY (0x0400)
-#define MPI2_SAS_DEVICE0_FLAGS_SATA_SW_PRESERVE (0x0200)
-#define MPI2_SAS_DEVICE0_FLAGS_UNSUPPORTED_DEVICE (0x0100)
-#define MPI2_SAS_DEVICE0_FLAGS_SATA_48BIT_LBA_SUPPORTED (0x0080)
-#define MPI2_SAS_DEVICE0_FLAGS_SATA_SMART_SUPPORTED (0x0040)
-#define MPI2_SAS_DEVICE0_FLAGS_SATA_NCQ_SUPPORTED (0x0020)
-#define MPI2_SAS_DEVICE0_FLAGS_SATA_FUA_SUPPORTED (0x0010)
-#define MPI2_SAS_DEVICE0_FLAGS_PORT_SELECTOR_ATTACH (0x0008)
-#define MPI2_SAS_DEVICE0_FLAGS_ENCL_LEVEL_VALID (0x0002)
-#define MPI2_SAS_DEVICE0_FLAGS_DEVICE_PRESENT (0x0001)
-
-
-/* SAS Device Page 1 */
-
-typedef struct _MPI2_CONFIG_PAGE_SAS_DEV_1
-{
- MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */
- U32 Reserved1; /* 0x08 */
- U64 SASAddress; /* 0x0C */
- U32 Reserved2; /* 0x14 */
- U16 DevHandle; /* 0x18 */
- U16 Reserved3; /* 0x1A */
- U8 InitialRegDeviceFIS[20];/* 0x1C */
-} MPI2_CONFIG_PAGE_SAS_DEV_1, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_SAS_DEV_1,
- Mpi2SasDevicePage1_t, MPI2_POINTER pMpi2SasDevicePage1_t;
-
-#define MPI2_SASDEVICE1_PAGEVERSION (0x01)
-
-
-/****************************************************************************
-* SAS PHY Config Pages
-****************************************************************************/
-
-/* SAS PHY Page 0 */
-
-typedef struct _MPI2_CONFIG_PAGE_SAS_PHY_0
-{
- MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */
- U16 OwnerDevHandle; /* 0x08 */
- U16 Reserved1; /* 0x0A */
- U16 AttachedDevHandle; /* 0x0C */
- U8 AttachedPhyIdentifier; /* 0x0E */
- U8 Reserved2; /* 0x0F */
- U32 AttachedPhyInfo; /* 0x10 */
- U8 ProgrammedLinkRate; /* 0x14 */
- U8 HwLinkRate; /* 0x15 */
- U8 ChangeCount; /* 0x16 */
- U8 Flags; /* 0x17 */
- U32 PhyInfo; /* 0x18 */
- U8 NegotiatedLinkRate; /* 0x1C */
- U8 Reserved3; /* 0x1D */
- U16 Reserved4; /* 0x1E */
-} MPI2_CONFIG_PAGE_SAS_PHY_0, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_SAS_PHY_0,
- Mpi2SasPhyPage0_t, MPI2_POINTER pMpi2SasPhyPage0_t;
-
-#define MPI2_SASPHY0_PAGEVERSION (0x03)
-
-/* use MPI2_SAS_APHYINFO_ defines for AttachedPhyInfo field */
-
-/* use MPI2_SAS_PRATE_ defines for the ProgrammedLinkRate field */
-
-/* use MPI2_SAS_HWRATE_ defines for the HwLinkRate field */
-
-/* values for SAS PHY Page 0 Flags field */
-#define MPI2_SAS_PHY0_FLAGS_SGPIO_DIRECT_ATTACH_ENC (0x01)
-
-/* use MPI2_SAS_PHYINFO_ for the PhyInfo field */
-
-/* use MPI2_SAS_NEG_LINK_RATE_ defines for the NegotiatedLinkRate field */
-
-
-/* SAS PHY Page 1 */
-
-typedef struct _MPI2_CONFIG_PAGE_SAS_PHY_1
-{
- MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */
- U32 Reserved1; /* 0x08 */
- U32 InvalidDwordCount; /* 0x0C */
- U32 RunningDisparityErrorCount; /* 0x10 */
- U32 LossDwordSynchCount; /* 0x14 */
- U32 PhyResetProblemCount; /* 0x18 */
-} MPI2_CONFIG_PAGE_SAS_PHY_1, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_SAS_PHY_1,
- Mpi2SasPhyPage1_t, MPI2_POINTER pMpi2SasPhyPage1_t;
-
-#define MPI2_SASPHY1_PAGEVERSION (0x01)
-
-
-/* SAS PHY Page 2 */
-
-typedef struct _MPI2_SASPHY2_PHY_EVENT {
- U8 PhyEventCode; /* 0x00 */
- U8 Reserved1; /* 0x01 */
- U16 Reserved2; /* 0x02 */
- U32 PhyEventInfo; /* 0x04 */
-} MPI2_SASPHY2_PHY_EVENT, MPI2_POINTER PTR_MPI2_SASPHY2_PHY_EVENT,
- Mpi2SasPhy2PhyEvent_t, MPI2_POINTER pMpi2SasPhy2PhyEvent_t;
-
-/* use MPI2_SASPHY3_EVENT_CODE_ for the PhyEventCode field */
-
-
-/*
- * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
- * one and check the value returned for NumPhyEvents at runtime.
- */
-#ifndef MPI2_SASPHY2_PHY_EVENT_MAX
-#define MPI2_SASPHY2_PHY_EVENT_MAX (1)
-#endif
-
-typedef struct _MPI2_CONFIG_PAGE_SAS_PHY_2 {
- MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */
- U32 Reserved1; /* 0x08 */
- U8 NumPhyEvents; /* 0x0C */
- U8 Reserved2; /* 0x0D */
- U16 Reserved3; /* 0x0E */
- MPI2_SASPHY2_PHY_EVENT PhyEvent[MPI2_SASPHY2_PHY_EVENT_MAX];
- /* 0x10 */
-} MPI2_CONFIG_PAGE_SAS_PHY_2, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_SAS_PHY_2,
- Mpi2SasPhyPage2_t, MPI2_POINTER pMpi2SasPhyPage2_t;
-
-#define MPI2_SASPHY2_PAGEVERSION (0x00)
-
-
-/* SAS PHY Page 3 */
-
-typedef struct _MPI2_SASPHY3_PHY_EVENT_CONFIG {
- U8 PhyEventCode; /* 0x00 */
- U8 Reserved1; /* 0x01 */
- U16 Reserved2; /* 0x02 */
- U8 CounterType; /* 0x04 */
- U8 ThresholdWindow; /* 0x05 */
- U8 TimeUnits; /* 0x06 */
- U8 Reserved3; /* 0x07 */
- U32 EventThreshold; /* 0x08 */
- U16 ThresholdFlags; /* 0x0C */
- U16 Reserved4; /* 0x0E */
-} MPI2_SASPHY3_PHY_EVENT_CONFIG, MPI2_POINTER PTR_MPI2_SASPHY3_PHY_EVENT_CONFIG,
- Mpi2SasPhy3PhyEventConfig_t, MPI2_POINTER pMpi2SasPhy3PhyEventConfig_t;
-
-/* values for PhyEventCode field */
-#define MPI2_SASPHY3_EVENT_CODE_NO_EVENT (0x00)
-#define MPI2_SASPHY3_EVENT_CODE_INVALID_DWORD (0x01)
-#define MPI2_SASPHY3_EVENT_CODE_RUNNING_DISPARITY_ERROR (0x02)
-#define MPI2_SASPHY3_EVENT_CODE_LOSS_DWORD_SYNC (0x03)
-#define MPI2_SASPHY3_EVENT_CODE_PHY_RESET_PROBLEM (0x04)
-#define MPI2_SASPHY3_EVENT_CODE_ELASTICITY_BUF_OVERFLOW (0x05)
-#define MPI2_SASPHY3_EVENT_CODE_RX_ERROR (0x06)
-#define MPI2_SASPHY3_EVENT_CODE_RX_ADDR_FRAME_ERROR (0x20)
-#define MPI2_SASPHY3_EVENT_CODE_TX_AC_OPEN_REJECT (0x21)
-#define MPI2_SASPHY3_EVENT_CODE_RX_AC_OPEN_REJECT (0x22)
-#define MPI2_SASPHY3_EVENT_CODE_TX_RC_OPEN_REJECT (0x23)
-#define MPI2_SASPHY3_EVENT_CODE_RX_RC_OPEN_REJECT (0x24)
-#define MPI2_SASPHY3_EVENT_CODE_RX_AIP_PARTIAL_WAITING_ON (0x25)
-#define MPI2_SASPHY3_EVENT_CODE_RX_AIP_CONNECT_WAITING_ON (0x26)
-#define MPI2_SASPHY3_EVENT_CODE_TX_BREAK (0x27)
-#define MPI2_SASPHY3_EVENT_CODE_RX_BREAK (0x28)
-#define MPI2_SASPHY3_EVENT_CODE_BREAK_TIMEOUT (0x29)
-#define MPI2_SASPHY3_EVENT_CODE_CONNECTION (0x2A)
-#define MPI2_SASPHY3_EVENT_CODE_PEAKTX_PATHWAY_BLOCKED (0x2B)
-#define MPI2_SASPHY3_EVENT_CODE_PEAKTX_ARB_WAIT_TIME (0x2C)
-#define MPI2_SASPHY3_EVENT_CODE_PEAK_ARB_WAIT_TIME (0x2D)
-#define MPI2_SASPHY3_EVENT_CODE_PEAK_CONNECT_TIME (0x2E)
-#define MPI2_SASPHY3_EVENT_CODE_TX_SSP_FRAMES (0x40)
-#define MPI2_SASPHY3_EVENT_CODE_RX_SSP_FRAMES (0x41)
-#define MPI2_SASPHY3_EVENT_CODE_TX_SSP_ERROR_FRAMES (0x42)
-#define MPI2_SASPHY3_EVENT_CODE_RX_SSP_ERROR_FRAMES (0x43)
-#define MPI2_SASPHY3_EVENT_CODE_TX_CREDIT_BLOCKED (0x44)
-#define MPI2_SASPHY3_EVENT_CODE_RX_CREDIT_BLOCKED (0x45)
-#define MPI2_SASPHY3_EVENT_CODE_TX_SATA_FRAMES (0x50)
-#define MPI2_SASPHY3_EVENT_CODE_RX_SATA_FRAMES (0x51)
-#define MPI2_SASPHY3_EVENT_CODE_SATA_OVERFLOW (0x52)
-#define MPI2_SASPHY3_EVENT_CODE_TX_SMP_FRAMES (0x60)
-#define MPI2_SASPHY3_EVENT_CODE_RX_SMP_FRAMES (0x61)
-#define MPI2_SASPHY3_EVENT_CODE_RX_SMP_ERROR_FRAMES (0x63)
-#define MPI2_SASPHY3_EVENT_CODE_HOTPLUG_TIMEOUT (0xD0)
-#define MPI2_SASPHY3_EVENT_CODE_MISALIGNED_MUX_PRIMITIVE (0xD1)
-#define MPI2_SASPHY3_EVENT_CODE_RX_AIP (0xD2)
-
-/* values for the CounterType field */
-#define MPI2_SASPHY3_COUNTER_TYPE_WRAPPING (0x00)
-#define MPI2_SASPHY3_COUNTER_TYPE_SATURATING (0x01)
-#define MPI2_SASPHY3_COUNTER_TYPE_PEAK_VALUE (0x02)
-
-/* values for the TimeUnits field */
-#define MPI2_SASPHY3_TIME_UNITS_10_MICROSECONDS (0x00)
-#define MPI2_SASPHY3_TIME_UNITS_100_MICROSECONDS (0x01)
-#define MPI2_SASPHY3_TIME_UNITS_1_MILLISECOND (0x02)
-#define MPI2_SASPHY3_TIME_UNITS_10_MILLISECONDS (0x03)
-
-/* values for the ThresholdFlags field */
-#define MPI2_SASPHY3_TFLAGS_PHY_RESET (0x0002)
-#define MPI2_SASPHY3_TFLAGS_EVENT_NOTIFY (0x0001)
-
-/*
- * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
- * one and check the value returned for NumPhyEvents at runtime.
- */
-#ifndef MPI2_SASPHY3_PHY_EVENT_MAX
-#define MPI2_SASPHY3_PHY_EVENT_MAX (1)
-#endif
-
-typedef struct _MPI2_CONFIG_PAGE_SAS_PHY_3 {
- MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */
- U32 Reserved1; /* 0x08 */
- U8 NumPhyEvents; /* 0x0C */
- U8 Reserved2; /* 0x0D */
- U16 Reserved3; /* 0x0E */
- MPI2_SASPHY3_PHY_EVENT_CONFIG PhyEventConfig
- [MPI2_SASPHY3_PHY_EVENT_MAX]; /* 0x10 */
-} MPI2_CONFIG_PAGE_SAS_PHY_3, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_SAS_PHY_3,
- Mpi2SasPhyPage3_t, MPI2_POINTER pMpi2SasPhyPage3_t;
-
-#define MPI2_SASPHY3_PAGEVERSION (0x00)
-
-
-/* SAS PHY Page 4 */
-
-typedef struct _MPI2_CONFIG_PAGE_SAS_PHY_4 {
- MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */
- U16 Reserved1; /* 0x08 */
- U8 Reserved2; /* 0x0A */
- U8 Flags; /* 0x0B */
- U8 InitialFrame[28]; /* 0x0C */
-} MPI2_CONFIG_PAGE_SAS_PHY_4, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_SAS_PHY_4,
- Mpi2SasPhyPage4_t, MPI2_POINTER pMpi2SasPhyPage4_t;
-
-#define MPI2_SASPHY4_PAGEVERSION (0x00)
-
-/* values for the Flags field */
-#define MPI2_SASPHY4_FLAGS_FRAME_VALID (0x02)
-#define MPI2_SASPHY4_FLAGS_SATA_FRAME (0x01)
-
-
-
-
-/****************************************************************************
-* SAS Port Config Pages
-****************************************************************************/
-
-/* SAS Port Page 0 */
-
-typedef struct _MPI2_CONFIG_PAGE_SAS_PORT_0
-{
- MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */
- U8 PortNumber; /* 0x08 */
- U8 PhysicalPort; /* 0x09 */
- U8 PortWidth; /* 0x0A */
- U8 PhysicalPortWidth; /* 0x0B */
- U8 ZoneGroup; /* 0x0C */
- U8 Reserved1; /* 0x0D */
- U16 Reserved2; /* 0x0E */
- U64 SASAddress; /* 0x10 */
- U32 DeviceInfo; /* 0x18 */
- U32 Reserved3; /* 0x1C */
- U32 Reserved4; /* 0x20 */
-} MPI2_CONFIG_PAGE_SAS_PORT_0, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_SAS_PORT_0,
- Mpi2SasPortPage0_t, MPI2_POINTER pMpi2SasPortPage0_t;
-
-#define MPI2_SASPORT0_PAGEVERSION (0x00)
-
-/* see mpi2_sas.h for values for SAS Port Page 0 DeviceInfo values */
-
-
-/****************************************************************************
-* SAS Enclosure Config Pages
-****************************************************************************/
-
-/* SAS Enclosure Page 0 */
-
-typedef struct _MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0
-{
- MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */
- U32 Reserved1; /* 0x08 */
- U64 EnclosureLogicalID; /* 0x0C */
- U16 Flags; /* 0x14 */
- U16 EnclosureHandle; /* 0x16 */
- U16 NumSlots; /* 0x18 */
- U16 StartSlot; /* 0x1A */
- U8 Reserved2; /* 0x1C */
- U8 EnclosureLevel; /* 0x1D */
- U16 SEPDevHandle; /* 0x1E */
- U32 Reserved3; /* 0x20 */
- U32 Reserved4; /* 0x24 */
-} MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0,
- MPI2_POINTER PTR_MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0,
- Mpi2SasEnclosurePage0_t, MPI2_POINTER pMpi2SasEnclosurePage0_t;
-
-#define MPI2_SASENCLOSURE0_PAGEVERSION (0x04)
-
-/* values for SAS Enclosure Page 0 Flags field */
-#define MPI2_SAS_ENCLS0_FLAGS_ENCL_LEVEL_VALID (0x0010)
-#define MPI2_SAS_ENCLS0_FLAGS_MNG_MASK (0x000F)
-#define MPI2_SAS_ENCLS0_FLAGS_MNG_UNKNOWN (0x0000)
-#define MPI2_SAS_ENCLS0_FLAGS_MNG_IOC_SES (0x0001)
-#define MPI2_SAS_ENCLS0_FLAGS_MNG_IOC_SGPIO (0x0002)
-#define MPI2_SAS_ENCLS0_FLAGS_MNG_EXP_SGPIO (0x0003)
-#define MPI2_SAS_ENCLS0_FLAGS_MNG_SES_ENCLOSURE (0x0004)
-#define MPI2_SAS_ENCLS0_FLAGS_MNG_IOC_GPIO (0x0005)
-
-
-/****************************************************************************
-* Log Config Page
-****************************************************************************/
-
-/* Log Page 0 */
-
-/*
- * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
- * one and check the value returned for NumLogEntries at runtime.
- */
-#ifndef MPI2_LOG_0_NUM_LOG_ENTRIES
-#define MPI2_LOG_0_NUM_LOG_ENTRIES (1)
-#endif
-
-#define MPI2_LOG_0_LOG_DATA_LENGTH (0x1C)
-
-typedef struct _MPI2_LOG_0_ENTRY
-{
- U64 TimeStamp; /* 0x00 */
- U32 Reserved1; /* 0x08 */
- U16 LogSequence; /* 0x0C */
- U16 LogEntryQualifier; /* 0x0E */
- U8 VP_ID; /* 0x10 */
- U8 VF_ID; /* 0x11 */
- U16 Reserved2; /* 0x12 */
- U8 LogData[MPI2_LOG_0_LOG_DATA_LENGTH];/* 0x14 */
-} MPI2_LOG_0_ENTRY, MPI2_POINTER PTR_MPI2_LOG_0_ENTRY,
- Mpi2Log0Entry_t, MPI2_POINTER pMpi2Log0Entry_t;
-
-/* values for Log Page 0 LogEntry LogEntryQualifier field */
-#define MPI2_LOG_0_ENTRY_QUAL_ENTRY_UNUSED (0x0000)
-#define MPI2_LOG_0_ENTRY_QUAL_POWER_ON_RESET (0x0001)
-#define MPI2_LOG_0_ENTRY_QUAL_TIMESTAMP_UPDATE (0x0002)
-#define MPI2_LOG_0_ENTRY_QUAL_MIN_IMPLEMENT_SPEC (0x8000)
-#define MPI2_LOG_0_ENTRY_QUAL_MAX_IMPLEMENT_SPEC (0xFFFF)
-
-typedef struct _MPI2_CONFIG_PAGE_LOG_0
-{
- MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */
- U32 Reserved1; /* 0x08 */
- U32 Reserved2; /* 0x0C */
- U16 NumLogEntries; /* 0x10 */
- U16 Reserved3; /* 0x12 */
- MPI2_LOG_0_ENTRY LogEntry[MPI2_LOG_0_NUM_LOG_ENTRIES]; /* 0x14 */
-} MPI2_CONFIG_PAGE_LOG_0, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_LOG_0,
- Mpi2LogPage0_t, MPI2_POINTER pMpi2LogPage0_t;
-
-#define MPI2_LOG_0_PAGEVERSION (0x02)
-
-
-/****************************************************************************
-* RAID Config Page
-****************************************************************************/
-
-/* RAID Page 0 */
-
-/*
- * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
- * one and check the value returned for NumElements at runtime.
- */
-#ifndef MPI2_RAIDCONFIG0_MAX_ELEMENTS
-#define MPI2_RAIDCONFIG0_MAX_ELEMENTS (1)
-#endif
-
-typedef struct _MPI2_RAIDCONFIG0_CONFIG_ELEMENT
-{
- U16 ElementFlags; /* 0x00 */
- U16 VolDevHandle; /* 0x02 */
- U8 HotSparePool; /* 0x04 */
- U8 PhysDiskNum; /* 0x05 */
- U16 PhysDiskDevHandle; /* 0x06 */
-} MPI2_RAIDCONFIG0_CONFIG_ELEMENT,
- MPI2_POINTER PTR_MPI2_RAIDCONFIG0_CONFIG_ELEMENT,
- Mpi2RaidConfig0ConfigElement_t, MPI2_POINTER pMpi2RaidConfig0ConfigElement_t;
-
-/* values for the ElementFlags field */
-#define MPI2_RAIDCONFIG0_EFLAGS_MASK_ELEMENT_TYPE (0x000F)
-#define MPI2_RAIDCONFIG0_EFLAGS_VOLUME_ELEMENT (0x0000)
-#define MPI2_RAIDCONFIG0_EFLAGS_VOL_PHYS_DISK_ELEMENT (0x0001)
-#define MPI2_RAIDCONFIG0_EFLAGS_HOT_SPARE_ELEMENT (0x0002)
-#define MPI2_RAIDCONFIG0_EFLAGS_OCE_ELEMENT (0x0003)
-
-
-typedef struct _MPI2_CONFIG_PAGE_RAID_CONFIGURATION_0
-{
- MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */
- U8 NumHotSpares; /* 0x08 */
- U8 NumPhysDisks; /* 0x09 */
- U8 NumVolumes; /* 0x0A */
- U8 ConfigNum; /* 0x0B */
- U32 Flags; /* 0x0C */
- U8 ConfigGUID[24]; /* 0x10 */
- U32 Reserved1; /* 0x28 */
- U8 NumElements; /* 0x2C */
- U8 Reserved2; /* 0x2D */
- U16 Reserved3; /* 0x2E */
- MPI2_RAIDCONFIG0_CONFIG_ELEMENT ConfigElement[MPI2_RAIDCONFIG0_MAX_ELEMENTS]; /* 0x30 */
-} MPI2_CONFIG_PAGE_RAID_CONFIGURATION_0,
- MPI2_POINTER PTR_MPI2_CONFIG_PAGE_RAID_CONFIGURATION_0,
- Mpi2RaidConfigurationPage0_t, MPI2_POINTER pMpi2RaidConfigurationPage0_t;
-
-#define MPI2_RAIDCONFIG0_PAGEVERSION (0x00)
-
-/* values for RAID Configuration Page 0 Flags field */
-#define MPI2_RAIDCONFIG0_FLAG_FOREIGN_CONFIG (0x00000001)
-
-
-/****************************************************************************
-* Driver Persistent Mapping Config Pages
-****************************************************************************/
-
-/* Driver Persistent Mapping Page 0 */
-
-typedef struct _MPI2_CONFIG_PAGE_DRIVER_MAP0_ENTRY
-{
- U64 PhysicalIdentifier; /* 0x00 */
- U16 MappingInformation; /* 0x08 */
- U16 DeviceIndex; /* 0x0A */
- U32 PhysicalBitsMapping; /* 0x0C */
- U32 Reserved1; /* 0x10 */
-} MPI2_CONFIG_PAGE_DRIVER_MAP0_ENTRY,
- MPI2_POINTER PTR_MPI2_CONFIG_PAGE_DRIVER_MAP0_ENTRY,
- Mpi2DriverMap0Entry_t, MPI2_POINTER pMpi2DriverMap0Entry_t;
-
-typedef struct _MPI2_CONFIG_PAGE_DRIVER_MAPPING_0
-{
- MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */
- MPI2_CONFIG_PAGE_DRIVER_MAP0_ENTRY Entry; /* 0x08 */
-} MPI2_CONFIG_PAGE_DRIVER_MAPPING_0,
- MPI2_POINTER PTR_MPI2_CONFIG_PAGE_DRIVER_MAPPING_0,
- Mpi2DriverMappingPage0_t, MPI2_POINTER pMpi2DriverMappingPage0_t;
-
-#define MPI2_DRIVERMAPPING0_PAGEVERSION (0x00)
-
-/* values for Driver Persistent Mapping Page 0 MappingInformation field */
-#define MPI2_DRVMAP0_MAPINFO_SLOT_MASK (0x07F0)
-#define MPI2_DRVMAP0_MAPINFO_SLOT_SHIFT (4)
-#define MPI2_DRVMAP0_MAPINFO_MISSING_MASK (0x000F)
-
-
-/****************************************************************************
-* Ethernet Config Pages
-****************************************************************************/
-
-/* Ethernet Page 0 */
-
-/* IP address (union of IPv4 and IPv6) */
-typedef union _MPI2_ETHERNET_IP_ADDR {
- U32 IPv4Addr;
- U32 IPv6Addr[4];
-} MPI2_ETHERNET_IP_ADDR, MPI2_POINTER PTR_MPI2_ETHERNET_IP_ADDR,
- Mpi2EthernetIpAddr_t, MPI2_POINTER pMpi2EthernetIpAddr_t;
-
-#define MPI2_ETHERNET_HOST_NAME_LENGTH (32)
-
-typedef struct _MPI2_CONFIG_PAGE_ETHERNET_0 {
- MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */
- U8 NumInterfaces; /* 0x08 */
- U8 Reserved0; /* 0x09 */
- U16 Reserved1; /* 0x0A */
- U32 Status; /* 0x0C */
- U8 MediaState; /* 0x10 */
- U8 Reserved2; /* 0x11 */
- U16 Reserved3; /* 0x12 */
- U8 MacAddress[6]; /* 0x14 */
- U8 Reserved4; /* 0x1A */
- U8 Reserved5; /* 0x1B */
- MPI2_ETHERNET_IP_ADDR IpAddress; /* 0x1C */
- MPI2_ETHERNET_IP_ADDR SubnetMask; /* 0x2C */
- MPI2_ETHERNET_IP_ADDR GatewayIpAddress; /* 0x3C */
- MPI2_ETHERNET_IP_ADDR DNS1IpAddress; /* 0x4C */
- MPI2_ETHERNET_IP_ADDR DNS2IpAddress; /* 0x5C */
- MPI2_ETHERNET_IP_ADDR DhcpIpAddress; /* 0x6C */
- U8 HostName
- [MPI2_ETHERNET_HOST_NAME_LENGTH];/* 0x7C */
-} MPI2_CONFIG_PAGE_ETHERNET_0, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_ETHERNET_0,
- Mpi2EthernetPage0_t, MPI2_POINTER pMpi2EthernetPage0_t;
-
-#define MPI2_ETHERNETPAGE0_PAGEVERSION (0x00)
-
-/* values for Ethernet Page 0 Status field */
-#define MPI2_ETHPG0_STATUS_IPV6_CAPABLE (0x80000000)
-#define MPI2_ETHPG0_STATUS_IPV4_CAPABLE (0x40000000)
-#define MPI2_ETHPG0_STATUS_CONSOLE_CONNECTED (0x20000000)
-#define MPI2_ETHPG0_STATUS_DEFAULT_IF (0x00000100)
-#define MPI2_ETHPG0_STATUS_FW_DWNLD_ENABLED (0x00000080)
-#define MPI2_ETHPG0_STATUS_TELNET_ENABLED (0x00000040)
-#define MPI2_ETHPG0_STATUS_SSH2_ENABLED (0x00000020)
-#define MPI2_ETHPG0_STATUS_DHCP_CLIENT_ENABLED (0x00000010)
-#define MPI2_ETHPG0_STATUS_IPV6_ENABLED (0x00000008)
-#define MPI2_ETHPG0_STATUS_IPV4_ENABLED (0x00000004)
-#define MPI2_ETHPG0_STATUS_IPV6_ADDRESSES (0x00000002)
-#define MPI2_ETHPG0_STATUS_ETH_IF_ENABLED (0x00000001)
-
-/* values for Ethernet Page 0 MediaState field */
-#define MPI2_ETHPG0_MS_DUPLEX_MASK (0x80)
-#define MPI2_ETHPG0_MS_HALF_DUPLEX (0x00)
-#define MPI2_ETHPG0_MS_FULL_DUPLEX (0x80)
-
-#define MPI2_ETHPG0_MS_CONNECT_SPEED_MASK (0x07)
-#define MPI2_ETHPG0_MS_NOT_CONNECTED (0x00)
-#define MPI2_ETHPG0_MS_10MBIT (0x01)
-#define MPI2_ETHPG0_MS_100MBIT (0x02)
-#define MPI2_ETHPG0_MS_1GBIT (0x03)
-
-
-/* Ethernet Page 1 */
-
-typedef struct _MPI2_CONFIG_PAGE_ETHERNET_1 {
- MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */
- U32 Reserved0; /* 0x08 */
- U32 Flags; /* 0x0C */
- U8 MediaState; /* 0x10 */
- U8 Reserved1; /* 0x11 */
- U16 Reserved2; /* 0x12 */
- U8 MacAddress[6]; /* 0x14 */
- U8 Reserved3; /* 0x1A */
- U8 Reserved4; /* 0x1B */
- MPI2_ETHERNET_IP_ADDR StaticIpAddress; /* 0x1C */
- MPI2_ETHERNET_IP_ADDR StaticSubnetMask; /* 0x2C */
- MPI2_ETHERNET_IP_ADDR StaticGatewayIpAddress; /* 0x3C */
- MPI2_ETHERNET_IP_ADDR StaticDNS1IpAddress; /* 0x4C */
- MPI2_ETHERNET_IP_ADDR StaticDNS2IpAddress; /* 0x5C */
- U32 Reserved5; /* 0x6C */
- U32 Reserved6; /* 0x70 */
- U32 Reserved7; /* 0x74 */
- U32 Reserved8; /* 0x78 */
- U8 HostName
- [MPI2_ETHERNET_HOST_NAME_LENGTH];/* 0x7C */
-} MPI2_CONFIG_PAGE_ETHERNET_1, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_ETHERNET_1,
- Mpi2EthernetPage1_t, MPI2_POINTER pMpi2EthernetPage1_t;
-
-#define MPI2_ETHERNETPAGE1_PAGEVERSION (0x00)
-
-/* values for Ethernet Page 1 Flags field */
-#define MPI2_ETHPG1_FLAG_SET_DEFAULT_IF (0x00000100)
-#define MPI2_ETHPG1_FLAG_ENABLE_FW_DOWNLOAD (0x00000080)
-#define MPI2_ETHPG1_FLAG_ENABLE_TELNET (0x00000040)
-#define MPI2_ETHPG1_FLAG_ENABLE_SSH2 (0x00000020)
-#define MPI2_ETHPG1_FLAG_ENABLE_DHCP_CLIENT (0x00000010)
-#define MPI2_ETHPG1_FLAG_ENABLE_IPV6 (0x00000008)
-#define MPI2_ETHPG1_FLAG_ENABLE_IPV4 (0x00000004)
-#define MPI2_ETHPG1_FLAG_USE_IPV6_ADDRESSES (0x00000002)
-#define MPI2_ETHPG1_FLAG_ENABLE_ETH_IF (0x00000001)
-
-/* values for Ethernet Page 1 MediaState field */
-#define MPI2_ETHPG1_MS_DUPLEX_MASK (0x80)
-#define MPI2_ETHPG1_MS_HALF_DUPLEX (0x00)
-#define MPI2_ETHPG1_MS_FULL_DUPLEX (0x80)
-
-#define MPI2_ETHPG1_MS_DATA_RATE_MASK (0x07)
-#define MPI2_ETHPG1_MS_DATA_RATE_AUTO (0x00)
-#define MPI2_ETHPG1_MS_DATA_RATE_10MBIT (0x01)
-#define MPI2_ETHPG1_MS_DATA_RATE_100MBIT (0x02)
-#define MPI2_ETHPG1_MS_DATA_RATE_1GBIT (0x03)
-
-
-/****************************************************************************
-* Extended Manufacturing Config Pages
-****************************************************************************/
-
-/*
- * Generic structure to use for product-specific extended manufacturing pages
- * (currently Extended Manufacturing Page 40 through Extended Manufacturing
- * Page 60).
- */
-
-typedef struct _MPI2_CONFIG_PAGE_EXT_MAN_PS {
- MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */
- U32 ProductSpecificInfo; /* 0x08 */
-} MPI2_CONFIG_PAGE_EXT_MAN_PS,
- MPI2_POINTER PTR_MPI2_CONFIG_PAGE_EXT_MAN_PS,
- Mpi2ExtManufacturingPagePS_t,
- MPI2_POINTER pMpi2ExtManufacturingPagePS_t;
-
-/* PageVersion should be provided by product-specific code */
-
-#endif
-
deleted file mode 100644
@@ -1,461 +0,0 @@
-/*
- * Copyright (c) 2000-2014 LSI Corporation.
- *
- *
- * Name: mpi2_init.h
- * Title: MPI SCSI initiator mode messages and structures
- * Creation Date: June 23, 2006
- *
- * mpi2_init.h Version: 02.00.15
- *
- * Version History
- * ---------------
- *
- * Date Version Description
- * -------- -------- ------------------------------------------------------
- * 04-30-07 02.00.00 Corresponds to Fusion-MPT MPI Specification Rev A.
- * 10-31-07 02.00.01 Fixed name for pMpi2SCSITaskManagementRequest_t.
- * 12-18-07 02.00.02 Modified Task Management Target Reset Method defines.
- * 02-29-08 02.00.03 Added Query Task Set and Query Unit Attention.
- * 03-03-08 02.00.04 Fixed name of struct _MPI2_SCSI_TASK_MANAGE_REPLY.
- * 05-21-08 02.00.05 Fixed typo in name of Mpi2SepRequest_t.
- * 10-02-08 02.00.06 Removed Untagged and No Disconnect values from SCSI IO
- * Control field Task Attribute flags.
- * Moved LUN field defines to mpi2.h because they are
- * common to many structures.
- * 05-06-09 02.00.07 Changed task management type of Query Unit Attention to
- * Query Asynchronous Event.
- * Defined two new bits in the SlotStatus field of the SCSI
- * Enclosure Processor Request and Reply.
- * 10-28-09 02.00.08 Added defines for decoding the ResponseInfo bytes for
- * both SCSI IO Error Reply and SCSI Task Management Reply.
- * Added ResponseInfo field to MPI2_SCSI_TASK_MANAGE_REPLY.
- * Added MPI2_SCSITASKMGMT_RSP_TM_OVERLAPPED_TAG define.
- * 02-10-10 02.00.09 Removed unused structure that had "#if 0" around it.
- * 05-12-10 02.00.10 Added optional vendor-unique region to SCSI IO Request.
- * 11-10-10 02.00.11 Added MPI2_SCSIIO_NUM_SGLOFFSETS define.
- * 02-06-12 02.00.13 Added alternate defines for Task Priority / Command
- * Priority to match SAM-4.
- * 07-10-12 02.00.14 Added MPI2_SCSIIO_CONTROL_SHIFT_DATADIRECTION.
- * 04-09-13 02.00.15 Added SCSIStatusQualifier field to MPI2_SCSI_IO_REPLY,
- * replacing the Reserved4 field.
- * --------------------------------------------------------------------------
- */
-
-#ifndef MPI2_INIT_H
-#define MPI2_INIT_H
-
-/*****************************************************************************
-*
-* SCSI Initiator Messages
-*
-*****************************************************************************/
-
-/****************************************************************************
-* SCSI IO messages and associated structures
-****************************************************************************/
-
-typedef struct
-{
- U8 CDB[20]; /* 0x00 */
- U32 PrimaryReferenceTag; /* 0x14 */
- U16 PrimaryApplicationTag; /* 0x18 */
- U16 PrimaryApplicationTagMask; /* 0x1A */
- U32 TransferLength; /* 0x1C */
-} MPI2_SCSI_IO_CDB_EEDP32, MPI2_POINTER PTR_MPI2_SCSI_IO_CDB_EEDP32,
- Mpi2ScsiIoCdbEedp32_t, MPI2_POINTER pMpi2ScsiIoCdbEedp32_t;
-
-typedef union
-{
- U8 CDB32[32];
- MPI2_SCSI_IO_CDB_EEDP32 EEDP32;
- MPI2_SGE_SIMPLE_UNION SGE;
-} MPI2_SCSI_IO_CDB_UNION, MPI2_POINTER PTR_MPI2_SCSI_IO_CDB_UNION,
- Mpi2ScsiIoCdb_t, MPI2_POINTER pMpi2ScsiIoCdb_t;
-
-/* SCSI IO Request Message */
-typedef struct _MPI2_SCSI_IO_REQUEST
-{
- U16 DevHandle; /* 0x00 */
- U8 ChainOffset; /* 0x02 */
- U8 Function; /* 0x03 */
- U16 Reserved1; /* 0x04 */
- U8 Reserved2; /* 0x06 */
- U8 MsgFlags; /* 0x07 */
- U8 VP_ID; /* 0x08 */
- U8 VF_ID; /* 0x09 */
- U16 Reserved3; /* 0x0A */
- U32 SenseBufferLowAddress; /* 0x0C */
- U16 SGLFlags; /* 0x10 */
- U8 SenseBufferLength; /* 0x12 */
- U8 Reserved4; /* 0x13 */
- U8 SGLOffset0; /* 0x14 */
- U8 SGLOffset1; /* 0x15 */
- U8 SGLOffset2; /* 0x16 */
- U8 SGLOffset3; /* 0x17 */
- U32 SkipCount; /* 0x18 */
- U32 DataLength; /* 0x1C */
- U32 BidirectionalDataLength; /* 0x20 */
- U16 IoFlags; /* 0x24 */
- U16 EEDPFlags; /* 0x26 */
- U32 EEDPBlockSize; /* 0x28 */
- U32 SecondaryReferenceTag; /* 0x2C */
- U16 SecondaryApplicationTag; /* 0x30 */
- U16 ApplicationTagTranslationMask; /* 0x32 */
- U8 LUN[8]; /* 0x34 */
- U32 Control; /* 0x3C */
- MPI2_SCSI_IO_CDB_UNION CDB; /* 0x40 */
-
-#ifdef MPI2_SCSI_IO_VENDOR_UNIQUE_REGION /* typically this is left undefined */
- MPI2_SCSI_IO_VENDOR_UNIQUE VendorRegion;
-#endif
-
- MPI2_SGE_IO_UNION SGL; /* 0x60 */
-
-} MPI2_SCSI_IO_REQUEST, MPI2_POINTER PTR_MPI2_SCSI_IO_REQUEST,
- Mpi2SCSIIORequest_t, MPI2_POINTER pMpi2SCSIIORequest_t;
-
-/* SCSI IO MsgFlags bits */
-
-/* MsgFlags for SenseBufferAddressSpace */
-#define MPI2_SCSIIO_MSGFLAGS_MASK_SENSE_ADDR (0x0C)
-#define MPI2_SCSIIO_MSGFLAGS_SYSTEM_SENSE_ADDR (0x00)
-#define MPI2_SCSIIO_MSGFLAGS_IOCDDR_SENSE_ADDR (0x04)
-#define MPI2_SCSIIO_MSGFLAGS_IOCPLB_SENSE_ADDR (0x08)
-#define MPI2_SCSIIO_MSGFLAGS_IOCPLBNTA_SENSE_ADDR (0x0C)
-
-/* SCSI IO SGLFlags bits */
-
-/* base values for Data Location Address Space */
-#define MPI2_SCSIIO_SGLFLAGS_ADDR_MASK (0x0C)
-#define MPI2_SCSIIO_SGLFLAGS_SYSTEM_ADDR (0x00)
-#define MPI2_SCSIIO_SGLFLAGS_IOCDDR_ADDR (0x04)
-#define MPI2_SCSIIO_SGLFLAGS_IOCPLB_ADDR (0x08)
-#define MPI2_SCSIIO_SGLFLAGS_IOCPLBNTA_ADDR (0x0C)
-
-/* base values for Type */
-#define MPI2_SCSIIO_SGLFLAGS_TYPE_MASK (0x03)
-#define MPI2_SCSIIO_SGLFLAGS_TYPE_MPI (0x00)
-#define MPI2_SCSIIO_SGLFLAGS_TYPE_IEEE32 (0x01)
-#define MPI2_SCSIIO_SGLFLAGS_TYPE_IEEE64 (0x02)
-
-/* shift values for each sub-field */
-#define MPI2_SCSIIO_SGLFLAGS_SGL3_SHIFT (12)
-#define MPI2_SCSIIO_SGLFLAGS_SGL2_SHIFT (8)
-#define MPI2_SCSIIO_SGLFLAGS_SGL1_SHIFT (4)
-#define MPI2_SCSIIO_SGLFLAGS_SGL0_SHIFT (0)
-
-/* number of SGLOffset fields */
-#define MPI2_SCSIIO_NUM_SGLOFFSETS (4)
-
-/* SCSI IO IoFlags bits */
-
-/* Large CDB Address Space */
-#define MPI2_SCSIIO_CDB_ADDR_MASK (0x6000)
-#define MPI2_SCSIIO_CDB_ADDR_SYSTEM (0x0000)
-#define MPI2_SCSIIO_CDB_ADDR_IOCDDR (0x2000)
-#define MPI2_SCSIIO_CDB_ADDR_IOCPLB (0x4000)
-#define MPI2_SCSIIO_CDB_ADDR_IOCPLBNTA (0x6000)
-
-#define MPI2_SCSIIO_IOFLAGS_LARGE_CDB (0x1000)
-#define MPI2_SCSIIO_IOFLAGS_BIDIRECTIONAL (0x0800)
-#define MPI2_SCSIIO_IOFLAGS_MULTICAST (0x0400)
-#define MPI2_SCSIIO_IOFLAGS_CMD_DETERMINES_DATA_DIR (0x0200)
-#define MPI2_SCSIIO_IOFLAGS_CDBLENGTH_MASK (0x01FF)
-
-/* SCSI IO EEDPFlags bits */
-
-#define MPI2_SCSIIO_EEDPFLAGS_INC_PRI_REFTAG (0x8000)
-#define MPI2_SCSIIO_EEDPFLAGS_INC_SEC_REFTAG (0x4000)
-#define MPI2_SCSIIO_EEDPFLAGS_INC_PRI_APPTAG (0x2000)
-#define MPI2_SCSIIO_EEDPFLAGS_INC_SEC_APPTAG (0x1000)
-
-#define MPI2_SCSIIO_EEDPFLAGS_CHECK_REFTAG (0x0400)
-#define MPI2_SCSIIO_EEDPFLAGS_CHECK_APPTAG (0x0200)
-#define MPI2_SCSIIO_EEDPFLAGS_CHECK_GUARD (0x0100)
-
-#define MPI2_SCSIIO_EEDPFLAGS_PASSTHRU_REFTAG (0x0008)
-
-#define MPI2_SCSIIO_EEDPFLAGS_MASK_OP (0x0007)
-#define MPI2_SCSIIO_EEDPFLAGS_NOOP_OP (0x0000)
-#define MPI2_SCSIIO_EEDPFLAGS_CHECK_OP (0x0001)
-#define MPI2_SCSIIO_EEDPFLAGS_STRIP_OP (0x0002)
-#define MPI2_SCSIIO_EEDPFLAGS_CHECK_REMOVE_OP (0x0003)
-#define MPI2_SCSIIO_EEDPFLAGS_INSERT_OP (0x0004)
-#define MPI2_SCSIIO_EEDPFLAGS_REPLACE_OP (0x0006)
-#define MPI2_SCSIIO_EEDPFLAGS_CHECK_REGEN_OP (0x0007)
-
-/* SCSI IO LUN fields: use MPI2_LUN_ from mpi2.h */
-
-/* SCSI IO Control bits */
-#define MPI2_SCSIIO_CONTROL_ADDCDBLEN_MASK (0xFC000000)
-#define MPI2_SCSIIO_CONTROL_ADDCDBLEN_SHIFT (26)
-
-#define MPI2_SCSIIO_CONTROL_DATADIRECTION_MASK (0x03000000)
-#define MPI2_SCSIIO_CONTROL_SHIFT_DATADIRECTION (24)
-#define MPI2_SCSIIO_CONTROL_NODATATRANSFER (0x00000000)
-#define MPI2_SCSIIO_CONTROL_WRITE (0x01000000)
-#define MPI2_SCSIIO_CONTROL_READ (0x02000000)
-#define MPI2_SCSIIO_CONTROL_BIDIRECTIONAL (0x03000000)
-
-#define MPI2_SCSIIO_CONTROL_TASKPRI_MASK (0x00007800)
-#define MPI2_SCSIIO_CONTROL_TASKPRI_SHIFT (11)
-/* alternate name for the previous field; called Command Priority in SAM-4 */
-#define MPI2_SCSIIO_CONTROL_CMDPRI_MASK (0x00007800)
-#define MPI2_SCSIIO_CONTROL_CMDPRI_SHIFT (11)
-
-#define MPI2_SCSIIO_CONTROL_TASKATTRIBUTE_MASK (0x00000700)
-#define MPI2_SCSIIO_CONTROL_SIMPLEQ (0x00000000)
-#define MPI2_SCSIIO_CONTROL_HEADOFQ (0x00000100)
-#define MPI2_SCSIIO_CONTROL_ORDEREDQ (0x00000200)
-#define MPI2_SCSIIO_CONTROL_ACAQ (0x00000400)
-
-#define MPI2_SCSIIO_CONTROL_TLR_MASK (0x000000C0)
-#define MPI2_SCSIIO_CONTROL_NO_TLR (0x00000000)
-#define MPI2_SCSIIO_CONTROL_TLR_ON (0x00000040)
-#define MPI2_SCSIIO_CONTROL_TLR_OFF (0x00000080)
-
-
-/* SCSI IO Error Reply Message */
-typedef struct _MPI2_SCSI_IO_REPLY
-{
- U16 DevHandle; /* 0x00 */
- U8 MsgLength; /* 0x02 */
- U8 Function; /* 0x03 */
- U16 Reserved1; /* 0x04 */
- U8 Reserved2; /* 0x06 */
- U8 MsgFlags; /* 0x07 */
- U8 VP_ID; /* 0x08 */
- U8 VF_ID; /* 0x09 */
- U16 Reserved3; /* 0x0A */
- U8 SCSIStatus; /* 0x0C */
- U8 SCSIState; /* 0x0D */
- U16 IOCStatus; /* 0x0E */
- U32 IOCLogInfo; /* 0x10 */
- U32 TransferCount; /* 0x14 */
- U32 SenseCount; /* 0x18 */
- U32 ResponseInfo; /* 0x1C */
- U16 TaskTag; /* 0x20 */
- U16 SCSIStatusQualifier; /* 0x22 */
- U32 BidirectionalTransferCount; /* 0x24 */
- U32 Reserved5; /* 0x28 */
- U32 Reserved6; /* 0x2C */
-} MPI2_SCSI_IO_REPLY, MPI2_POINTER PTR_MPI2_SCSI_IO_REPLY,
- Mpi2SCSIIOReply_t, MPI2_POINTER pMpi2SCSIIOReply_t;
-
-/* SCSI IO Reply SCSIStatus values (SAM-4 status codes) */
-
-#define MPI2_SCSI_STATUS_GOOD (0x00)
-#define MPI2_SCSI_STATUS_CHECK_CONDITION (0x02)
-#define MPI2_SCSI_STATUS_CONDITION_MET (0x04)
-#define MPI2_SCSI_STATUS_BUSY (0x08)
-#define MPI2_SCSI_STATUS_INTERMEDIATE (0x10)
-#define MPI2_SCSI_STATUS_INTERMEDIATE_CONDMET (0x14)
-#define MPI2_SCSI_STATUS_RESERVATION_CONFLICT (0x18)
-#define MPI2_SCSI_STATUS_COMMAND_TERMINATED (0x22) /* obsolete */
-#define MPI2_SCSI_STATUS_TASK_SET_FULL (0x28)
-#define MPI2_SCSI_STATUS_ACA_ACTIVE (0x30)
-#define MPI2_SCSI_STATUS_TASK_ABORTED (0x40)
-
-/* SCSI IO Reply SCSIState flags */
-
-#define MPI2_SCSI_STATE_RESPONSE_INFO_VALID (0x10)
-#define MPI2_SCSI_STATE_TERMINATED (0x08)
-#define MPI2_SCSI_STATE_NO_SCSI_STATUS (0x04)
-#define MPI2_SCSI_STATE_AUTOSENSE_FAILED (0x02)
-#define MPI2_SCSI_STATE_AUTOSENSE_VALID (0x01)
-
-/* masks and shifts for the ResponseInfo field */
-
-#define MPI2_SCSI_RI_MASK_REASONCODE (0x000000FF)
-#define MPI2_SCSI_RI_SHIFT_REASONCODE (0)
-
-#define MPI2_SCSI_TASKTAG_UNKNOWN (0xFFFF)
-
-
-/****************************************************************************
-* SCSI Task Management messages
-****************************************************************************/
-
-/* SCSI Task Management Request Message */
-typedef struct _MPI2_SCSI_TASK_MANAGE_REQUEST
-{
- U16 DevHandle; /* 0x00 */
- U8 ChainOffset; /* 0x02 */
- U8 Function; /* 0x03 */
- U8 Reserved1; /* 0x04 */
- U8 TaskType; /* 0x05 */
- U8 Reserved2; /* 0x06 */
- U8 MsgFlags; /* 0x07 */
- U8 VP_ID; /* 0x08 */
- U8 VF_ID; /* 0x09 */
- U16 Reserved3; /* 0x0A */
- U8 LUN[8]; /* 0x0C */
- U32 Reserved4[7]; /* 0x14 */
- U16 TaskMID; /* 0x30 */
- U16 Reserved5; /* 0x32 */
-} MPI2_SCSI_TASK_MANAGE_REQUEST,
- MPI2_POINTER PTR_MPI2_SCSI_TASK_MANAGE_REQUEST,
- Mpi2SCSITaskManagementRequest_t,
- MPI2_POINTER pMpi2SCSITaskManagementRequest_t;
-
-/* TaskType values */
-
-#define MPI2_SCSITASKMGMT_TASKTYPE_ABORT_TASK (0x01)
-#define MPI2_SCSITASKMGMT_TASKTYPE_ABRT_TASK_SET (0x02)
-#define MPI2_SCSITASKMGMT_TASKTYPE_TARGET_RESET (0x03)
-#define MPI2_SCSITASKMGMT_TASKTYPE_LOGICAL_UNIT_RESET (0x05)
-#define MPI2_SCSITASKMGMT_TASKTYPE_CLEAR_TASK_SET (0x06)
-#define MPI2_SCSITASKMGMT_TASKTYPE_QUERY_TASK (0x07)
-#define MPI2_SCSITASKMGMT_TASKTYPE_CLR_ACA (0x08)
-#define MPI2_SCSITASKMGMT_TASKTYPE_QRY_TASK_SET (0x09)
-#define MPI2_SCSITASKMGMT_TASKTYPE_QRY_ASYNC_EVENT (0x0A)
-
-/* obsolete TaskType name */
-#define MPI2_SCSITASKMGMT_TASKTYPE_QRY_UNIT_ATTENTION \
- (MPI2_SCSITASKMGMT_TASKTYPE_QRY_ASYNC_EVENT)
-
-/* MsgFlags bits */
-
-#define MPI2_SCSITASKMGMT_MSGFLAGS_MASK_TARGET_RESET (0x18)
-#define MPI2_SCSITASKMGMT_MSGFLAGS_LINK_RESET (0x00)
-#define MPI2_SCSITASKMGMT_MSGFLAGS_NEXUS_RESET_SRST (0x08)
-#define MPI2_SCSITASKMGMT_MSGFLAGS_SAS_HARD_LINK_RESET (0x10)
-
-#define MPI2_SCSITASKMGMT_MSGFLAGS_DO_NOT_SEND_TASK_IU (0x01)
-
-
-
-/* SCSI Task Management Reply Message */
-typedef struct _MPI2_SCSI_TASK_MANAGE_REPLY
-{
- U16 DevHandle; /* 0x00 */
- U8 MsgLength; /* 0x02 */
- U8 Function; /* 0x03 */
- U8 ResponseCode; /* 0x04 */
- U8 TaskType; /* 0x05 */
- U8 Reserved1; /* 0x06 */
- U8 MsgFlags; /* 0x07 */
- U8 VP_ID; /* 0x08 */
- U8 VF_ID; /* 0x09 */
- U16 Reserved2; /* 0x0A */
- U16 Reserved3; /* 0x0C */
- U16 IOCStatus; /* 0x0E */
- U32 IOCLogInfo; /* 0x10 */
- U32 TerminationCount; /* 0x14 */
- U32 ResponseInfo; /* 0x18 */
-} MPI2_SCSI_TASK_MANAGE_REPLY,
- MPI2_POINTER PTR_MPI2_SCSI_TASK_MANAGE_REPLY,
- Mpi2SCSITaskManagementReply_t, MPI2_POINTER pMpi2SCSIManagementReply_t;
-
-/* ResponseCode values */
-
-#define MPI2_SCSITASKMGMT_RSP_TM_COMPLETE (0x00)
-#define MPI2_SCSITASKMGMT_RSP_INVALID_FRAME (0x02)
-#define MPI2_SCSITASKMGMT_RSP_TM_NOT_SUPPORTED (0x04)
-#define MPI2_SCSITASKMGMT_RSP_TM_FAILED (0x05)
-#define MPI2_SCSITASKMGMT_RSP_TM_SUCCEEDED (0x08)
-#define MPI2_SCSITASKMGMT_RSP_TM_INVALID_LUN (0x09)
-#define MPI2_SCSITASKMGMT_RSP_TM_OVERLAPPED_TAG (0x0A)
-#define MPI2_SCSITASKMGMT_RSP_IO_QUEUED_ON_IOC (0x80)
-
-/* masks and shifts for the ResponseInfo field */
-
-#define MPI2_SCSITASKMGMT_RI_MASK_REASONCODE (0x000000FF)
-#define MPI2_SCSITASKMGMT_RI_SHIFT_REASONCODE (0)
-#define MPI2_SCSITASKMGMT_RI_MASK_ARI2 (0x0000FF00)
-#define MPI2_SCSITASKMGMT_RI_SHIFT_ARI2 (8)
-#define MPI2_SCSITASKMGMT_RI_MASK_ARI1 (0x00FF0000)
-#define MPI2_SCSITASKMGMT_RI_SHIFT_ARI1 (16)
-#define MPI2_SCSITASKMGMT_RI_MASK_ARI0 (0xFF000000)
-#define MPI2_SCSITASKMGMT_RI_SHIFT_ARI0 (24)
-
-
-/****************************************************************************
-* SCSI Enclosure Processor messages
-****************************************************************************/
-
-/* SCSI Enclosure Processor Request Message */
-typedef struct _MPI2_SEP_REQUEST
-{
- U16 DevHandle; /* 0x00 */
- U8 ChainOffset; /* 0x02 */
- U8 Function; /* 0x03 */
- U8 Action; /* 0x04 */
- U8 Flags; /* 0x05 */
- U8 Reserved1; /* 0x06 */
- U8 MsgFlags; /* 0x07 */
- U8 VP_ID; /* 0x08 */
- U8 VF_ID; /* 0x09 */
- U16 Reserved2; /* 0x0A */
- U32 SlotStatus; /* 0x0C */
- U32 Reserved3; /* 0x10 */
- U32 Reserved4; /* 0x14 */
- U32 Reserved5; /* 0x18 */
- U16 Slot; /* 0x1C */
- U16 EnclosureHandle; /* 0x1E */
-} MPI2_SEP_REQUEST, MPI2_POINTER PTR_MPI2_SEP_REQUEST,
- Mpi2SepRequest_t, MPI2_POINTER pMpi2SepRequest_t;
-
-/* Action defines */
-#define MPI2_SEP_REQ_ACTION_WRITE_STATUS (0x00)
-#define MPI2_SEP_REQ_ACTION_READ_STATUS (0x01)
-
-/* Flags defines */
-#define MPI2_SEP_REQ_FLAGS_DEVHANDLE_ADDRESS (0x00)
-#define MPI2_SEP_REQ_FLAGS_ENCLOSURE_SLOT_ADDRESS (0x01)
-
-/* SlotStatus defines */
-#define MPI2_SEP_REQ_SLOTSTATUS_REQUEST_REMOVE (0x00040000)
-#define MPI2_SEP_REQ_SLOTSTATUS_IDENTIFY_REQUEST (0x00020000)
-#define MPI2_SEP_REQ_SLOTSTATUS_REBUILD_STOPPED (0x00000200)
-#define MPI2_SEP_REQ_SLOTSTATUS_HOT_SPARE (0x00000100)
-#define MPI2_SEP_REQ_SLOTSTATUS_UNCONFIGURED (0x00000080)
-#define MPI2_SEP_REQ_SLOTSTATUS_PREDICTED_FAULT (0x00000040)
-#define MPI2_SEP_REQ_SLOTSTATUS_IN_CRITICAL_ARRAY (0x00000010)
-#define MPI2_SEP_REQ_SLOTSTATUS_IN_FAILED_ARRAY (0x00000008)
-#define MPI2_SEP_REQ_SLOTSTATUS_DEV_REBUILDING (0x00000004)
-#define MPI2_SEP_REQ_SLOTSTATUS_DEV_FAULTY (0x00000002)
-#define MPI2_SEP_REQ_SLOTSTATUS_NO_ERROR (0x00000001)
-
-
-/* SCSI Enclosure Processor Reply Message */
-typedef struct _MPI2_SEP_REPLY
-{
- U16 DevHandle; /* 0x00 */
- U8 MsgLength; /* 0x02 */
- U8 Function; /* 0x03 */
- U8 Action; /* 0x04 */
- U8 Flags; /* 0x05 */
- U8 Reserved1; /* 0x06 */
- U8 MsgFlags; /* 0x07 */
- U8 VP_ID; /* 0x08 */
- U8 VF_ID; /* 0x09 */
- U16 Reserved2; /* 0x0A */
- U16 Reserved3; /* 0x0C */
- U16 IOCStatus; /* 0x0E */
- U32 IOCLogInfo; /* 0x10 */
- U32 SlotStatus; /* 0x14 */
- U32 Reserved4; /* 0x18 */
- U16 Slot; /* 0x1C */
- U16 EnclosureHandle; /* 0x1E */
-} MPI2_SEP_REPLY, MPI2_POINTER PTR_MPI2_SEP_REPLY,
- Mpi2SepReply_t, MPI2_POINTER pMpi2SepReply_t;
-
-/* SlotStatus defines */
-#define MPI2_SEP_REPLY_SLOTSTATUS_REMOVE_READY (0x00040000)
-#define MPI2_SEP_REPLY_SLOTSTATUS_IDENTIFY_REQUEST (0x00020000)
-#define MPI2_SEP_REPLY_SLOTSTATUS_REBUILD_STOPPED (0x00000200)
-#define MPI2_SEP_REPLY_SLOTSTATUS_HOT_SPARE (0x00000100)
-#define MPI2_SEP_REPLY_SLOTSTATUS_UNCONFIGURED (0x00000080)
-#define MPI2_SEP_REPLY_SLOTSTATUS_PREDICTED_FAULT (0x00000040)
-#define MPI2_SEP_REPLY_SLOTSTATUS_IN_CRITICAL_ARRAY (0x00000010)
-#define MPI2_SEP_REPLY_SLOTSTATUS_IN_FAILED_ARRAY (0x00000008)
-#define MPI2_SEP_REPLY_SLOTSTATUS_DEV_REBUILDING (0x00000004)
-#define MPI2_SEP_REPLY_SLOTSTATUS_DEV_FAULTY (0x00000002)
-#define MPI2_SEP_REPLY_SLOTSTATUS_NO_ERROR (0x00000001)
-
-
-#endif
-
-
deleted file mode 100644
@@ -1,1708 +0,0 @@
-/*
- * Copyright (c) 2000-2014 LSI Corporation.
- *
- *
- * Name: mpi2_ioc.h
- * Title: MPI IOC, Port, Event, FW Download, and FW Upload messages
- * Creation Date: October 11, 2006
- *
- * mpi2_ioc.h Version: 02.00.24
- *
- * Version History
- * ---------------
- *
- * Date Version Description
- * -------- -------- ------------------------------------------------------
- * 04-30-07 02.00.00 Corresponds to Fusion-MPT MPI Specification Rev A.
- * 06-04-07 02.00.01 In IOCFacts Reply structure, renamed MaxDevices to
- * MaxTargets.
- * Added TotalImageSize field to FWDownload Request.
- * Added reserved words to FWUpload Request.
- * 06-26-07 02.00.02 Added IR Configuration Change List Event.
- * 08-31-07 02.00.03 Removed SystemReplyQueueDepth field from the IOCInit
- * request and replaced it with
- * ReplyDescriptorPostQueueDepth and ReplyFreeQueueDepth.
- * Replaced the MinReplyQueueDepth field of the IOCFacts
- * reply with MaxReplyDescriptorPostQueueDepth.
- * Added MPI2_RDPQ_DEPTH_MIN define to specify the minimum
- * depth for the Reply Descriptor Post Queue.
- * Added SASAddress field to Initiator Device Table
- * Overflow Event data.
- * 10-31-07 02.00.04 Added ReasonCode MPI2_EVENT_SAS_INIT_RC_NOT_RESPONDING
- * for SAS Initiator Device Status Change Event data.
- * Modified Reason Code defines for SAS Topology Change
- * List Event data, including adding a bit for PHY Vacant
- * status, and adding a mask for the Reason Code.
- * Added define for
- * MPI2_EVENT_SAS_TOPO_ES_DELAY_NOT_RESPONDING.
- * Added define for MPI2_EXT_IMAGE_TYPE_MEGARAID.
- * 12-18-07 02.00.05 Added Boot Status defines for the IOCExceptions field of
- * the IOCFacts Reply.
- * Removed MPI2_IOCFACTS_CAPABILITY_EXTENDED_BUFFER define.
- * Moved MPI2_VERSION_UNION to mpi2.h.
- * Changed MPI2_EVENT_NOTIFICATION_REQUEST to use masks
- * instead of enables, and added SASBroadcastPrimitiveMasks
- * field.
- * Added Log Entry Added Event and related structure.
- * 02-29-08 02.00.06 Added define MPI2_IOCFACTS_CAPABILITY_INTEGRATED_RAID.
- * Removed define MPI2_IOCFACTS_PROTOCOL_SMP_TARGET.
- * Added MaxVolumes and MaxPersistentEntries fields to
- * IOCFacts reply.
- * Added ProtocalFlags and IOCCapabilities fields to
- * MPI2_FW_IMAGE_HEADER.
- * Removed MPI2_PORTENABLE_FLAGS_ENABLE_SINGLE_PORT.
- * 03-03-08 02.00.07 Fixed MPI2_FW_IMAGE_HEADER by changing Reserved26 to
- * a U16 (from a U32).
- * Removed extra 's' from EventMasks name.
- * 06-27-08 02.00.08 Fixed an offset in a comment.
- * 10-02-08 02.00.09 Removed SystemReplyFrameSize from MPI2_IOC_INIT_REQUEST.
- * Removed CurReplyFrameSize from MPI2_IOC_FACTS_REPLY and
- * renamed MinReplyFrameSize to ReplyFrameSize.
- * Added MPI2_IOCFACTS_EXCEPT_IR_FOREIGN_CONFIG_MAX.
- * Added two new RAIDOperation values for Integrated RAID
- * Operations Status Event data.
- * Added four new IR Configuration Change List Event data
- * ReasonCode values.
- * Added two new ReasonCode defines for SAS Device Status
- * Change Event data.
- * Added three new DiscoveryStatus bits for the SAS
- * Discovery event data.
- * Added Multiplexing Status Change bit to the PhyStatus
- * field of the SAS Topology Change List event data.
- * Removed define for MPI2_INIT_IMAGE_BOOTFLAGS_XMEMCOPY.
- * BootFlags are now product-specific.
- * Added defines for the indivdual signature bytes
- * for MPI2_INIT_IMAGE_FOOTER.
- * 01-19-09 02.00.10 Added MPI2_IOCFACTS_CAPABILITY_EVENT_REPLAY define.
- * Added MPI2_EVENT_SAS_DISC_DS_DOWNSTREAM_INITIATOR
- * define.
- * Added MPI2_EVENT_SAS_DEV_STAT_RC_SATA_INIT_FAILURE
- * define.
- * Removed MPI2_EVENT_SAS_DISC_DS_SATA_INIT_FAILURE define.
- * 05-06-09 02.00.11 Added MPI2_IOCFACTS_CAPABILITY_RAID_ACCELERATOR define.
- * Added MPI2_IOCFACTS_CAPABILITY_MSI_X_INDEX define.
- * Added two new reason codes for SAS Device Status Change
- * Event.
- * Added new event: SAS PHY Counter.
- * 07-30-09 02.00.12 Added GPIO Interrupt event define and structure.
- * Added MPI2_IOCFACTS_CAPABILITY_EXTENDED_BUFFER define.
- * Added new product id family for 2208.
- * 10-28-09 02.00.13 Added HostMSIxVectors field to MPI2_IOC_INIT_REQUEST.
- * Added MaxMSIxVectors field to MPI2_IOC_FACTS_REPLY.
- * Added MinDevHandle field to MPI2_IOC_FACTS_REPLY.
- * Added MPI2_IOCFACTS_CAPABILITY_HOST_BASED_DISCOVERY.
- * Added MPI2_EVENT_HOST_BASED_DISCOVERY_PHY define.
- * Added MPI2_EVENT_SAS_TOPO_ES_NO_EXPANDER define.
- * Added Host Based Discovery Phy Event data.
- * Added defines for ProductID Product field
- * (MPI2_FW_HEADER_PID_).
- * Modified values for SAS ProductID Family
- * (MPI2_FW_HEADER_PID_FAMILY_).
- * 02-10-10 02.00.14 Added SAS Quiesce Event structure and defines.
- * Added PowerManagementControl Request structures and
- * defines.
- * 05-12-10 02.00.15 Marked Task Set Full Event as obsolete.
- * Added MPI2_EVENT_SAS_TOPO_LR_UNSUPPORTED_PHY define.
- * 11-10-10 02.00.16 Added MPI2_FW_DOWNLOAD_ITYPE_MIN_PRODUCT_SPECIFIC.
- * 02-23-11 02.00.17 Added SAS NOTIFY Primitive event, and added
- * SASNotifyPrimitiveMasks field to
- * MPI2_EVENT_NOTIFICATION_REQUEST.
- * Added Temperature Threshold Event.
- * Added Host Message Event.
- * Added Send Host Message request and reply.
- * 05-25-11 02.00.18 For Extended Image Header, added
- * MPI2_EXT_IMAGE_TYPE_MIN_PRODUCT_SPECIFIC and
- * MPI2_EXT_IMAGE_TYPE_MAX_PRODUCT_SPECIFIC defines.
- * Deprecated MPI2_EXT_IMAGE_TYPE_MAX define.
- * 08-24-11 02.00.19 Added PhysicalPort field to
- * MPI2_EVENT_DATA_SAS_DEVICE_STATUS_CHANGE structure.
- * Marked MPI2_PM_CONTROL_FEATURE_PCIE_LINK as obsolete.
- * 03-29-12 02.00.21 Added a product specific range to event values.
- * 07-26-12 02.00.22 Added MPI2_IOCFACTS_EXCEPT_PARTIAL_MEMORY_FAILURE.
- * Added ElapsedSeconds field to
- * MPI2_EVENT_DATA_IR_OPERATION_STATUS.
- * 08-19-13 02.00.23 For IOCInit, added MPI2_IOCINIT_MSGFLAG_RDPQ_ARRAY_MODE
- * and MPI2_IOC_INIT_RDPQ_ARRAY_ENTRY.
- * Added MPI2_IOCFACTS_CAPABILITY_RDPQ_ARRAY_CAPABLE.
- * Added MPI2_FW_DOWNLOAD_ITYPE_PUBLIC_KEY.
- * Added Encrypted Hash Extended Image.
- * 12-05-13 02.00.24 Added MPI25_HASH_IMAGE_TYPE_BIOS.
- * --------------------------------------------------------------------------
- */
-
-#ifndef MPI2_IOC_H
-#define MPI2_IOC_H
-
-/*****************************************************************************
-*
-* IOC Messages
-*
-*****************************************************************************/
-
-/****************************************************************************
-* IOCInit message
-****************************************************************************/
-
-/* IOCInit Request message */
-typedef struct _MPI2_IOC_INIT_REQUEST
-{
- U8 WhoInit; /* 0x00 */
- U8 Reserved1; /* 0x01 */
- U8 ChainOffset; /* 0x02 */
- U8 Function; /* 0x03 */
- U16 Reserved2; /* 0x04 */
- U8 Reserved3; /* 0x06 */
- U8 MsgFlags; /* 0x07 */
- U8 VP_ID; /* 0x08 */
- U8 VF_ID; /* 0x09 */
- U16 Reserved4; /* 0x0A */
- U16 MsgVersion; /* 0x0C */
- U16 HeaderVersion; /* 0x0E */
- U32 Reserved5; /* 0x10 */
- U16 Reserved6; /* 0x14 */
- U8 Reserved7; /* 0x16 */
- U8 HostMSIxVectors; /* 0x17 */
- U16 Reserved8; /* 0x18 */
- U16 SystemRequestFrameSize; /* 0x1A */
- U16 ReplyDescriptorPostQueueDepth; /* 0x1C */
- U16 ReplyFreeQueueDepth; /* 0x1E */
- U32 SenseBufferAddressHigh; /* 0x20 */
- U32 SystemReplyAddressHigh; /* 0x24 */
- U64 SystemRequestFrameBaseAddress; /* 0x28 */
- U64 ReplyDescriptorPostQueueAddress;/* 0x30 */
- U64 ReplyFreeQueueAddress; /* 0x38 */
- U64 TimeStamp; /* 0x40 */
-} MPI2_IOC_INIT_REQUEST, MPI2_POINTER PTR_MPI2_IOC_INIT_REQUEST,
- Mpi2IOCInitRequest_t, MPI2_POINTER pMpi2IOCInitRequest_t;
-
-/* WhoInit values */
-#define MPI2_WHOINIT_NOT_INITIALIZED (0x00)
-#define MPI2_WHOINIT_SYSTEM_BIOS (0x01)
-#define MPI2_WHOINIT_ROM_BIOS (0x02)
-#define MPI2_WHOINIT_PCI_PEER (0x03)
-#define MPI2_WHOINIT_HOST_DRIVER (0x04)
-#define MPI2_WHOINIT_MANUFACTURER (0x05)
-
-/* MsgFlags */
-#define MPI2_IOCINIT_MSGFLAG_RDPQ_ARRAY_MODE (0x01)
-
-/* MsgVersion */
-#define MPI2_IOCINIT_MSGVERSION_MAJOR_MASK (0xFF00)
-#define MPI2_IOCINIT_MSGVERSION_MAJOR_SHIFT (8)
-#define MPI2_IOCINIT_MSGVERSION_MINOR_MASK (0x00FF)
-#define MPI2_IOCINIT_MSGVERSION_MINOR_SHIFT (0)
-
-/* HeaderVersion */
-#define MPI2_IOCINIT_HDRVERSION_UNIT_MASK (0xFF00)
-#define MPI2_IOCINIT_HDRVERSION_UNIT_SHIFT (8)
-#define MPI2_IOCINIT_HDRVERSION_DEV_MASK (0x00FF)
-#define MPI2_IOCINIT_HDRVERSION_DEV_SHIFT (0)
-
-/* minimum depth for a Reply Descriptor Post Queue */
-#define MPI2_RDPQ_DEPTH_MIN (16)
-
-/* Reply Descriptor Post Queue Array Entry */
-typedef struct _MPI2_IOC_INIT_RDPQ_ARRAY_ENTRY {
- U64 RDPQBaseAddress; /* 0x00 */
- U32 Reserved1; /* 0x08 */
- U32 Reserved2; /* 0x0C */
-} MPI2_IOC_INIT_RDPQ_ARRAY_ENTRY,
-MPI2_POINTER PTR_MPI2_IOC_INIT_RDPQ_ARRAY_ENTRY,
-Mpi2IOCInitRDPQArrayEntry, MPI2_POINTER pMpi2IOCInitRDPQArrayEntry;
-
-/* IOCInit Reply message */
-typedef struct _MPI2_IOC_INIT_REPLY
-{
- U8 WhoInit; /* 0x00 */
- U8 Reserved1; /* 0x01 */
- U8 MsgLength; /* 0x02 */
- U8 Function; /* 0x03 */
- U16 Reserved2; /* 0x04 */
- U8 Reserved3; /* 0x06 */
- U8 MsgFlags; /* 0x07 */
- U8 VP_ID; /* 0x08 */
- U8 VF_ID; /* 0x09 */
- U16 Reserved4; /* 0x0A */
- U16 Reserved5; /* 0x0C */
- U16 IOCStatus; /* 0x0E */
- U32 IOCLogInfo; /* 0x10 */
-} MPI2_IOC_INIT_REPLY, MPI2_POINTER PTR_MPI2_IOC_INIT_REPLY,
- Mpi2IOCInitReply_t, MPI2_POINTER pMpi2IOCInitReply_t;
-
-
-/****************************************************************************
-* IOCFacts message
-****************************************************************************/
-
-/* IOCFacts Request message */
-typedef struct _MPI2_IOC_FACTS_REQUEST
-{
- U16 Reserved1; /* 0x00 */
- U8 ChainOffset; /* 0x02 */
- U8 Function; /* 0x03 */
- U16 Reserved2; /* 0x04 */
- U8 Reserved3; /* 0x06 */
- U8 MsgFlags; /* 0x07 */
- U8 VP_ID; /* 0x08 */
- U8 VF_ID; /* 0x09 */
- U16 Reserved4; /* 0x0A */
-} MPI2_IOC_FACTS_REQUEST, MPI2_POINTER PTR_MPI2_IOC_FACTS_REQUEST,
- Mpi2IOCFactsRequest_t, MPI2_POINTER pMpi2IOCFactsRequest_t;
-
-
-/* IOCFacts Reply message */
-typedef struct _MPI2_IOC_FACTS_REPLY
-{
- U16 MsgVersion; /* 0x00 */
- U8 MsgLength; /* 0x02 */
- U8 Function; /* 0x03 */
- U16 HeaderVersion; /* 0x04 */
- U8 IOCNumber; /* 0x06 */
- U8 MsgFlags; /* 0x07 */
- U8 VP_ID; /* 0x08 */
- U8 VF_ID; /* 0x09 */
- U16 Reserved1; /* 0x0A */
- U16 IOCExceptions; /* 0x0C */
- U16 IOCStatus; /* 0x0E */
- U32 IOCLogInfo; /* 0x10 */
- U8 MaxChainDepth; /* 0x14 */
- U8 WhoInit; /* 0x15 */
- U8 NumberOfPorts; /* 0x16 */
- U8 MaxMSIxVectors; /* 0x17 */
- U16 RequestCredit; /* 0x18 */
- U16 ProductID; /* 0x1A */
- U32 IOCCapabilities; /* 0x1C */
- MPI2_VERSION_UNION FWVersion; /* 0x20 */
- U16 IOCRequestFrameSize; /* 0x24 */
- U16 Reserved3; /* 0x26 */
- U16 MaxInitiators; /* 0x28 */
- U16 MaxTargets; /* 0x2A */
- U16 MaxSasExpanders; /* 0x2C */
- U16 MaxEnclosures; /* 0x2E */
- U16 ProtocolFlags; /* 0x30 */
- U16 HighPriorityCredit; /* 0x32 */
- U16 MaxReplyDescriptorPostQueueDepth; /* 0x34 */
- U8 ReplyFrameSize; /* 0x36 */
- U8 MaxVolumes; /* 0x37 */
- U16 MaxDevHandle; /* 0x38 */
- U16 MaxPersistentEntries; /* 0x3A */
- U16 MinDevHandle; /* 0x3C */
- U16 Reserved4; /* 0x3E */
-} MPI2_IOC_FACTS_REPLY, MPI2_POINTER PTR_MPI2_IOC_FACTS_REPLY,
- Mpi2IOCFactsReply_t, MPI2_POINTER pMpi2IOCFactsReply_t;
-
-/* MsgVersion */
-#define MPI2_IOCFACTS_MSGVERSION_MAJOR_MASK (0xFF00)
-#define MPI2_IOCFACTS_MSGVERSION_MAJOR_SHIFT (8)
-#define MPI2_IOCFACTS_MSGVERSION_MINOR_MASK (0x00FF)
-#define MPI2_IOCFACTS_MSGVERSION_MINOR_SHIFT (0)
-
-/* HeaderVersion */
-#define MPI2_IOCFACTS_HDRVERSION_UNIT_MASK (0xFF00)
-#define MPI2_IOCFACTS_HDRVERSION_UNIT_SHIFT (8)
-#define MPI2_IOCFACTS_HDRVERSION_DEV_MASK (0x00FF)
-#define MPI2_IOCFACTS_HDRVERSION_DEV_SHIFT (0)
-
-/* IOCExceptions */
-#define MPI2_IOCFACTS_EXCEPT_PARTIAL_MEMORY_FAILURE (0x0200)
-#define MPI2_IOCFACTS_EXCEPT_IR_FOREIGN_CONFIG_MAX (0x0100)
-
-#define MPI2_IOCFACTS_EXCEPT_BOOTSTAT_MASK (0x00E0)
-#define MPI2_IOCFACTS_EXCEPT_BOOTSTAT_GOOD (0x0000)
-#define MPI2_IOCFACTS_EXCEPT_BOOTSTAT_BACKUP (0x0020)
-#define MPI2_IOCFACTS_EXCEPT_BOOTSTAT_RESTORED (0x0040)
-#define MPI2_IOCFACTS_EXCEPT_BOOTSTAT_CORRUPT_BACKUP (0x0060)
-
-#define MPI2_IOCFACTS_EXCEPT_METADATA_UNSUPPORTED (0x0010)
-#define MPI2_IOCFACTS_EXCEPT_MANUFACT_CHECKSUM_FAIL (0x0008)
-#define MPI2_IOCFACTS_EXCEPT_FW_CHECKSUM_FAIL (0x0004)
-#define MPI2_IOCFACTS_EXCEPT_RAID_CONFIG_INVALID (0x0002)
-#define MPI2_IOCFACTS_EXCEPT_CONFIG_CHECKSUM_FAIL (0x0001)
-
-/* defines for WhoInit field are after the IOCInit Request */
-
-/* ProductID field uses MPI2_FW_HEADER_PID_ */
-
-/* IOCCapabilities */
-#define MPI2_IOCFACTS_CAPABILITY_RDPQ_ARRAY_CAPABLE (0x00040000)
-#define MPI2_IOCFACTS_CAPABILITY_HOST_BASED_DISCOVERY (0x00010000)
-#define MPI2_IOCFACTS_CAPABILITY_MSI_X_INDEX (0x00008000)
-#define MPI2_IOCFACTS_CAPABILITY_RAID_ACCELERATOR (0x00004000)
-#define MPI2_IOCFACTS_CAPABILITY_EVENT_REPLAY (0x00002000)
-#define MPI2_IOCFACTS_CAPABILITY_INTEGRATED_RAID (0x00001000)
-#define MPI2_IOCFACTS_CAPABILITY_TLR (0x00000800)
-#define MPI2_IOCFACTS_CAPABILITY_MULTICAST (0x00000100)
-#define MPI2_IOCFACTS_CAPABILITY_BIDIRECTIONAL_TARGET (0x00000080)
-#define MPI2_IOCFACTS_CAPABILITY_EEDP (0x00000040)
-#define MPI2_IOCFACTS_CAPABILITY_EXTENDED_BUFFER (0x00000020)
-#define MPI2_IOCFACTS_CAPABILITY_SNAPSHOT_BUFFER (0x00000010)
-#define MPI2_IOCFACTS_CAPABILITY_DIAG_TRACE_BUFFER (0x00000008)
-#define MPI2_IOCFACTS_CAPABILITY_TASK_SET_FULL_HANDLING (0x00000004)
-
-/* ProtocolFlags */
-#define MPI2_IOCFACTS_PROTOCOL_SCSI_TARGET (0x0001)
-#define MPI2_IOCFACTS_PROTOCOL_SCSI_INITIATOR (0x0002)
-
-
-/****************************************************************************
-* PortFacts message
-****************************************************************************/
-
-/* PortFacts Request message */
-typedef struct _MPI2_PORT_FACTS_REQUEST
-{
- U16 Reserved1; /* 0x00 */
- U8 ChainOffset; /* 0x02 */
- U8 Function; /* 0x03 */
- U16 Reserved2; /* 0x04 */
- U8 PortNumber; /* 0x06 */
- U8 MsgFlags; /* 0x07 */
- U8 VP_ID; /* 0x08 */
- U8 VF_ID; /* 0x09 */
- U16 Reserved3; /* 0x0A */
-} MPI2_PORT_FACTS_REQUEST, MPI2_POINTER PTR_MPI2_PORT_FACTS_REQUEST,
- Mpi2PortFactsRequest_t, MPI2_POINTER pMpi2PortFactsRequest_t;
-
-/* PortFacts Reply message */
-typedef struct _MPI2_PORT_FACTS_REPLY
-{
- U16 Reserved1; /* 0x00 */
- U8 MsgLength; /* 0x02 */
- U8 Function; /* 0x03 */
- U16 Reserved2; /* 0x04 */
- U8 PortNumber; /* 0x06 */
- U8 MsgFlags; /* 0x07 */
- U8 VP_ID; /* 0x08 */
- U8 VF_ID; /* 0x09 */
- U16 Reserved3; /* 0x0A */
- U16 Reserved4; /* 0x0C */
- U16 IOCStatus; /* 0x0E */
- U32 IOCLogInfo; /* 0x10 */
- U8 Reserved5; /* 0x14 */
- U8 PortType; /* 0x15 */
- U16 Reserved6; /* 0x16 */
- U16 MaxPostedCmdBuffers; /* 0x18 */
- U16 Reserved7; /* 0x1A */
-} MPI2_PORT_FACTS_REPLY, MPI2_POINTER PTR_MPI2_PORT_FACTS_REPLY,
- Mpi2PortFactsReply_t, MPI2_POINTER pMpi2PortFactsReply_t;
-
-/* PortType values */
-#define MPI2_PORTFACTS_PORTTYPE_INACTIVE (0x00)
-#define MPI2_PORTFACTS_PORTTYPE_FC (0x10)
-#define MPI2_PORTFACTS_PORTTYPE_ISCSI (0x20)
-#define MPI2_PORTFACTS_PORTTYPE_SAS_PHYSICAL (0x30)
-#define MPI2_PORTFACTS_PORTTYPE_SAS_VIRTUAL (0x31)
-
-
-/****************************************************************************
-* PortEnable message
-****************************************************************************/
-
-/* PortEnable Request message */
-typedef struct _MPI2_PORT_ENABLE_REQUEST
-{
- U16 Reserved1; /* 0x00 */
- U8 ChainOffset; /* 0x02 */
- U8 Function; /* 0x03 */
- U8 Reserved2; /* 0x04 */
- U8 PortFlags; /* 0x05 */
- U8 Reserved3; /* 0x06 */
- U8 MsgFlags; /* 0x07 */
- U8 VP_ID; /* 0x08 */
- U8 VF_ID; /* 0x09 */
- U16 Reserved4; /* 0x0A */
-} MPI2_PORT_ENABLE_REQUEST, MPI2_POINTER PTR_MPI2_PORT_ENABLE_REQUEST,
- Mpi2PortEnableRequest_t, MPI2_POINTER pMpi2PortEnableRequest_t;
-
-
-/* PortEnable Reply message */
-typedef struct _MPI2_PORT_ENABLE_REPLY
-{
- U16 Reserved1; /* 0x00 */
- U8 MsgLength; /* 0x02 */
- U8 Function; /* 0x03 */
- U8 Reserved2; /* 0x04 */
- U8 PortFlags; /* 0x05 */
- U8 Reserved3; /* 0x06 */
- U8 MsgFlags; /* 0x07 */
- U8 VP_ID; /* 0x08 */
- U8 VF_ID; /* 0x09 */
- U16 Reserved4; /* 0x0A */
- U16 Reserved5; /* 0x0C */
- U16 IOCStatus; /* 0x0E */
- U32 IOCLogInfo; /* 0x10 */
-} MPI2_PORT_ENABLE_REPLY, MPI2_POINTER PTR_MPI2_PORT_ENABLE_REPLY,
- Mpi2PortEnableReply_t, MPI2_POINTER pMpi2PortEnableReply_t;
-
-
-/****************************************************************************
-* EventNotification message
-****************************************************************************/
-
-/* EventNotification Request message */
-#define MPI2_EVENT_NOTIFY_EVENTMASK_WORDS (4)
-
-typedef struct _MPI2_EVENT_NOTIFICATION_REQUEST
-{
- U16 Reserved1; /* 0x00 */
- U8 ChainOffset; /* 0x02 */
- U8 Function; /* 0x03 */
- U16 Reserved2; /* 0x04 */
- U8 Reserved3; /* 0x06 */
- U8 MsgFlags; /* 0x07 */
- U8 VP_ID; /* 0x08 */
- U8 VF_ID; /* 0x09 */
- U16 Reserved4; /* 0x0A */
- U32 Reserved5; /* 0x0C */
- U32 Reserved6; /* 0x10 */
- U32 EventMasks[MPI2_EVENT_NOTIFY_EVENTMASK_WORDS];/* 0x14 */
- U16 SASBroadcastPrimitiveMasks; /* 0x24 */
- U16 SASNotifyPrimitiveMasks; /* 0x26 */
- U32 Reserved8; /* 0x28 */
-} MPI2_EVENT_NOTIFICATION_REQUEST,
- MPI2_POINTER PTR_MPI2_EVENT_NOTIFICATION_REQUEST,
- Mpi2EventNotificationRequest_t, MPI2_POINTER pMpi2EventNotificationRequest_t;
-
-
-/* EventNotification Reply message */
-typedef struct _MPI2_EVENT_NOTIFICATION_REPLY
-{
- U16 EventDataLength; /* 0x00 */
- U8 MsgLength; /* 0x02 */
- U8 Function; /* 0x03 */
- U16 Reserved1; /* 0x04 */
- U8 AckRequired; /* 0x06 */
- U8 MsgFlags; /* 0x07 */
- U8 VP_ID; /* 0x08 */
- U8 VF_ID; /* 0x09 */
- U16 Reserved2; /* 0x0A */
- U16 Reserved3; /* 0x0C */
- U16 IOCStatus; /* 0x0E */
- U32 IOCLogInfo; /* 0x10 */
- U16 Event; /* 0x14 */
- U16 Reserved4; /* 0x16 */
- U32 EventContext; /* 0x18 */
- U32 EventData[1]; /* 0x1C */
-} MPI2_EVENT_NOTIFICATION_REPLY, MPI2_POINTER PTR_MPI2_EVENT_NOTIFICATION_REPLY,
- Mpi2EventNotificationReply_t, MPI2_POINTER pMpi2EventNotificationReply_t;
-
-/* AckRequired */
-#define MPI2_EVENT_NOTIFICATION_ACK_NOT_REQUIRED (0x00)
-#define MPI2_EVENT_NOTIFICATION_ACK_REQUIRED (0x01)
-
-/* Event */
-#define MPI2_EVENT_LOG_DATA (0x0001)
-#define MPI2_EVENT_STATE_CHANGE (0x0002)
-#define MPI2_EVENT_HARD_RESET_RECEIVED (0x0005)
-#define MPI2_EVENT_EVENT_CHANGE (0x000A)
-#define MPI2_EVENT_TASK_SET_FULL (0x000E) /* obsolete */
-#define MPI2_EVENT_SAS_DEVICE_STATUS_CHANGE (0x000F)
-#define MPI2_EVENT_IR_OPERATION_STATUS (0x0014)
-#define MPI2_EVENT_SAS_DISCOVERY (0x0016)
-#define MPI2_EVENT_SAS_BROADCAST_PRIMITIVE (0x0017)
-#define MPI2_EVENT_SAS_INIT_DEVICE_STATUS_CHANGE (0x0018)
-#define MPI2_EVENT_SAS_INIT_TABLE_OVERFLOW (0x0019)
-#define MPI2_EVENT_SAS_TOPOLOGY_CHANGE_LIST (0x001C)
-#define MPI2_EVENT_SAS_ENCL_DEVICE_STATUS_CHANGE (0x001D)
-#define MPI2_EVENT_IR_VOLUME (0x001E)
-#define MPI2_EVENT_IR_PHYSICAL_DISK (0x001F)
-#define MPI2_EVENT_IR_CONFIGURATION_CHANGE_LIST (0x0020)
-#define MPI2_EVENT_LOG_ENTRY_ADDED (0x0021)
-#define MPI2_EVENT_SAS_PHY_COUNTER (0x0022)
-#define MPI2_EVENT_GPIO_INTERRUPT (0x0023)
-#define MPI2_EVENT_HOST_BASED_DISCOVERY_PHY (0x0024)
-#define MPI2_EVENT_SAS_QUIESCE (0x0025)
-#define MPI2_EVENT_SAS_NOTIFY_PRIMITIVE (0x0026)
-#define MPI2_EVENT_TEMP_THRESHOLD (0x0027)
-#define MPI2_EVENT_HOST_MESSAGE (0x0028)
-#define MPI2_EVENT_MIN_PRODUCT_SPECIFIC (0x006E)
-#define MPI2_EVENT_MAX_PRODUCT_SPECIFIC (0x007F)
-
-/* Log Entry Added Event data */
-
-/* the following structure matches MPI2_LOG_0_ENTRY in mpi2_cnfg.h */
-#define MPI2_EVENT_DATA_LOG_DATA_LENGTH (0x1C)
-
-typedef struct _MPI2_EVENT_DATA_LOG_ENTRY_ADDED
-{
- U64 TimeStamp; /* 0x00 */
- U32 Reserved1; /* 0x08 */
- U16 LogSequence; /* 0x0C */
- U16 LogEntryQualifier; /* 0x0E */
- U8 VP_ID; /* 0x10 */
- U8 VF_ID; /* 0x11 */
- U16 Reserved2; /* 0x12 */
- U8 LogData[MPI2_EVENT_DATA_LOG_DATA_LENGTH];/* 0x14 */
-} MPI2_EVENT_DATA_LOG_ENTRY_ADDED,
- MPI2_POINTER PTR_MPI2_EVENT_DATA_LOG_ENTRY_ADDED,
- Mpi2EventDataLogEntryAdded_t, MPI2_POINTER pMpi2EventDataLogEntryAdded_t;
-
-/* GPIO Interrupt Event data */
-
-typedef struct _MPI2_EVENT_DATA_GPIO_INTERRUPT {
- U8 GPIONum; /* 0x00 */
- U8 Reserved1; /* 0x01 */
- U16 Reserved2; /* 0x02 */
-} MPI2_EVENT_DATA_GPIO_INTERRUPT,
- MPI2_POINTER PTR_MPI2_EVENT_DATA_GPIO_INTERRUPT,
- Mpi2EventDataGpioInterrupt_t, MPI2_POINTER pMpi2EventDataGpioInterrupt_t;
-
-/* Temperature Threshold Event data */
-
-typedef struct _MPI2_EVENT_DATA_TEMPERATURE {
- U16 Status; /* 0x00 */
- U8 SensorNum; /* 0x02 */
- U8 Reserved1; /* 0x03 */
- U16 CurrentTemperature; /* 0x04 */
- U16 Reserved2; /* 0x06 */
- U32 Reserved3; /* 0x08 */
- U32 Reserved4; /* 0x0C */
-} MPI2_EVENT_DATA_TEMPERATURE,
-MPI2_POINTER PTR_MPI2_EVENT_DATA_TEMPERATURE,
-Mpi2EventDataTemperature_t, MPI2_POINTER pMpi2EventDataTemperature_t;
-
-/* Temperature Threshold Event data Status bits */
-#define MPI2_EVENT_TEMPERATURE3_EXCEEDED (0x0008)
-#define MPI2_EVENT_TEMPERATURE2_EXCEEDED (0x0004)
-#define MPI2_EVENT_TEMPERATURE1_EXCEEDED (0x0002)
-#define MPI2_EVENT_TEMPERATURE0_EXCEEDED (0x0001)
-
-
-/* Host Message Event data */
-
-typedef struct _MPI2_EVENT_DATA_HOST_MESSAGE {
- U8 SourceVF_ID; /* 0x00 */
- U8 Reserved1; /* 0x01 */
- U16 Reserved2; /* 0x02 */
- U32 Reserved3; /* 0x04 */
- U32 HostData[1]; /* 0x08 */
-} MPI2_EVENT_DATA_HOST_MESSAGE, MPI2_POINTER PTR_MPI2_EVENT_DATA_HOST_MESSAGE,
-Mpi2EventDataHostMessage_t, MPI2_POINTER pMpi2EventDataHostMessage_t;
-
-
-/* Hard Reset Received Event data */
-
-typedef struct _MPI2_EVENT_DATA_HARD_RESET_RECEIVED
-{
- U8 Reserved1; /* 0x00 */
- U8 Port; /* 0x01 */
- U16 Reserved2; /* 0x02 */
-} MPI2_EVENT_DATA_HARD_RESET_RECEIVED,
- MPI2_POINTER PTR_MPI2_EVENT_DATA_HARD_RESET_RECEIVED,
- Mpi2EventDataHardResetReceived_t,
- MPI2_POINTER pMpi2EventDataHardResetReceived_t;
-
-/* Task Set Full Event data */
-/* this event is obsolete */
-
-typedef struct _MPI2_EVENT_DATA_TASK_SET_FULL
-{
- U16 DevHandle; /* 0x00 */
- U16 CurrentDepth; /* 0x02 */
-} MPI2_EVENT_DATA_TASK_SET_FULL, MPI2_POINTER PTR_MPI2_EVENT_DATA_TASK_SET_FULL,
- Mpi2EventDataTaskSetFull_t, MPI2_POINTER pMpi2EventDataTaskSetFull_t;
-
-
-/* SAS Device Status Change Event data */
-
-typedef struct _MPI2_EVENT_DATA_SAS_DEVICE_STATUS_CHANGE
-{
- U16 TaskTag; /* 0x00 */
- U8 ReasonCode; /* 0x02 */
- U8 PhysicalPort; /* 0x03 */
- U8 ASC; /* 0x04 */
- U8 ASCQ; /* 0x05 */
- U16 DevHandle; /* 0x06 */
- U32 Reserved2; /* 0x08 */
- U64 SASAddress; /* 0x0C */
- U8 LUN[8]; /* 0x14 */
-} MPI2_EVENT_DATA_SAS_DEVICE_STATUS_CHANGE,
- MPI2_POINTER PTR_MPI2_EVENT_DATA_SAS_DEVICE_STATUS_CHANGE,
- Mpi2EventDataSasDeviceStatusChange_t,
- MPI2_POINTER pMpi2EventDataSasDeviceStatusChange_t;
-
-/* SAS Device Status Change Event data ReasonCode values */
-#define MPI2_EVENT_SAS_DEV_STAT_RC_SMART_DATA (0x05)
-#define MPI2_EVENT_SAS_DEV_STAT_RC_UNSUPPORTED (0x07)
-#define MPI2_EVENT_SAS_DEV_STAT_RC_INTERNAL_DEVICE_RESET (0x08)
-#define MPI2_EVENT_SAS_DEV_STAT_RC_TASK_ABORT_INTERNAL (0x09)
-#define MPI2_EVENT_SAS_DEV_STAT_RC_ABORT_TASK_SET_INTERNAL (0x0A)
-#define MPI2_EVENT_SAS_DEV_STAT_RC_CLEAR_TASK_SET_INTERNAL (0x0B)
-#define MPI2_EVENT_SAS_DEV_STAT_RC_QUERY_TASK_INTERNAL (0x0C)
-#define MPI2_EVENT_SAS_DEV_STAT_RC_ASYNC_NOTIFICATION (0x0D)
-#define MPI2_EVENT_SAS_DEV_STAT_RC_CMP_INTERNAL_DEV_RESET (0x0E)
-#define MPI2_EVENT_SAS_DEV_STAT_RC_CMP_TASK_ABORT_INTERNAL (0x0F)
-#define MPI2_EVENT_SAS_DEV_STAT_RC_SATA_INIT_FAILURE (0x10)
-#define MPI2_EVENT_SAS_DEV_STAT_RC_EXPANDER_REDUCED_FUNCTIONALITY (0x11)
-#define MPI2_EVENT_SAS_DEV_STAT_RC_CMP_EXPANDER_REDUCED_FUNCTIONALITY (0x12)
-
-
-/* Integrated RAID Operation Status Event data */
-
-typedef struct _MPI2_EVENT_DATA_IR_OPERATION_STATUS
-{
- U16 VolDevHandle; /* 0x00 */
- U16 Reserved1; /* 0x02 */
- U8 RAIDOperation; /* 0x04 */
- U8 PercentComplete; /* 0x05 */
- U16 Reserved2; /* 0x06 */
- U32 ElapsedSeconds; /* 0x08 */
-} MPI2_EVENT_DATA_IR_OPERATION_STATUS,
- MPI2_POINTER PTR_MPI2_EVENT_DATA_IR_OPERATION_STATUS,
- Mpi2EventDataIrOperationStatus_t,
- MPI2_POINTER pMpi2EventDataIrOperationStatus_t;
-
-/* Integrated RAID Operation Status Event data RAIDOperation values */
-#define MPI2_EVENT_IR_RAIDOP_RESYNC (0x00)
-#define MPI2_EVENT_IR_RAIDOP_ONLINE_CAP_EXPANSION (0x01)
-#define MPI2_EVENT_IR_RAIDOP_CONSISTENCY_CHECK (0x02)
-#define MPI2_EVENT_IR_RAIDOP_BACKGROUND_INIT (0x03)
-#define MPI2_EVENT_IR_RAIDOP_MAKE_DATA_CONSISTENT (0x04)
-
-
-/* Integrated RAID Volume Event data */
-
-typedef struct _MPI2_EVENT_DATA_IR_VOLUME
-{
- U16 VolDevHandle; /* 0x00 */
- U8 ReasonCode; /* 0x02 */
- U8 Reserved1; /* 0x03 */
- U32 NewValue; /* 0x04 */
- U32 PreviousValue; /* 0x08 */
-} MPI2_EVENT_DATA_IR_VOLUME, MPI2_POINTER PTR_MPI2_EVENT_DATA_IR_VOLUME,
- Mpi2EventDataIrVolume_t, MPI2_POINTER pMpi2EventDataIrVolume_t;
-
-/* Integrated RAID Volume Event data ReasonCode values */
-#define MPI2_EVENT_IR_VOLUME_RC_SETTINGS_CHANGED (0x01)
-#define MPI2_EVENT_IR_VOLUME_RC_STATUS_FLAGS_CHANGED (0x02)
-#define MPI2_EVENT_IR_VOLUME_RC_STATE_CHANGED (0x03)
-
-
-/* Integrated RAID Physical Disk Event data */
-
-typedef struct _MPI2_EVENT_DATA_IR_PHYSICAL_DISK
-{
- U16 Reserved1; /* 0x00 */
- U8 ReasonCode; /* 0x02 */
- U8 PhysDiskNum; /* 0x03 */
- U16 PhysDiskDevHandle; /* 0x04 */
- U16 Reserved2; /* 0x06 */
- U16 Slot; /* 0x08 */
- U16 EnclosureHandle; /* 0x0A */
- U32 NewValue; /* 0x0C */
- U32 PreviousValue; /* 0x10 */
-} MPI2_EVENT_DATA_IR_PHYSICAL_DISK,
- MPI2_POINTER PTR_MPI2_EVENT_DATA_IR_PHYSICAL_DISK,
- Mpi2EventDataIrPhysicalDisk_t, MPI2_POINTER pMpi2EventDataIrPhysicalDisk_t;
-
-/* Integrated RAID Physical Disk Event data ReasonCode values */
-#define MPI2_EVENT_IR_PHYSDISK_RC_SETTINGS_CHANGED (0x01)
-#define MPI2_EVENT_IR_PHYSDISK_RC_STATUS_FLAGS_CHANGED (0x02)
-#define MPI2_EVENT_IR_PHYSDISK_RC_STATE_CHANGED (0x03)
-
-
-/* Integrated RAID Configuration Change List Event data */
-
-/*
- * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
- * one and check NumElements at runtime.
- */
-#ifndef MPI2_EVENT_IR_CONFIG_ELEMENT_COUNT
-#define MPI2_EVENT_IR_CONFIG_ELEMENT_COUNT (1)
-#endif
-
-typedef struct _MPI2_EVENT_IR_CONFIG_ELEMENT
-{
- U16 ElementFlags; /* 0x00 */
- U16 VolDevHandle; /* 0x02 */
- U8 ReasonCode; /* 0x04 */
- U8 PhysDiskNum; /* 0x05 */
- U16 PhysDiskDevHandle; /* 0x06 */
-} MPI2_EVENT_IR_CONFIG_ELEMENT, MPI2_POINTER PTR_MPI2_EVENT_IR_CONFIG_ELEMENT,
- Mpi2EventIrConfigElement_t, MPI2_POINTER pMpi2EventIrConfigElement_t;
-
-/* IR Configuration Change List Event data ElementFlags values */
-#define MPI2_EVENT_IR_CHANGE_EFLAGS_ELEMENT_TYPE_MASK (0x000F)
-#define MPI2_EVENT_IR_CHANGE_EFLAGS_VOLUME_ELEMENT (0x0000)
-#define MPI2_EVENT_IR_CHANGE_EFLAGS_VOLPHYSDISK_ELEMENT (0x0001)
-#define MPI2_EVENT_IR_CHANGE_EFLAGS_HOTSPARE_ELEMENT (0x0002)
-
-/* IR Configuration Change List Event data ReasonCode values */
-#define MPI2_EVENT_IR_CHANGE_RC_ADDED (0x01)
-#define MPI2_EVENT_IR_CHANGE_RC_REMOVED (0x02)
-#define MPI2_EVENT_IR_CHANGE_RC_NO_CHANGE (0x03)
-#define MPI2_EVENT_IR_CHANGE_RC_HIDE (0x04)
-#define MPI2_EVENT_IR_CHANGE_RC_UNHIDE (0x05)
-#define MPI2_EVENT_IR_CHANGE_RC_VOLUME_CREATED (0x06)
-#define MPI2_EVENT_IR_CHANGE_RC_VOLUME_DELETED (0x07)
-#define MPI2_EVENT_IR_CHANGE_RC_PD_CREATED (0x08)
-#define MPI2_EVENT_IR_CHANGE_RC_PD_DELETED (0x09)
-
-typedef struct _MPI2_EVENT_DATA_IR_CONFIG_CHANGE_LIST
-{
- U8 NumElements; /* 0x00 */
- U8 Reserved1; /* 0x01 */
- U8 Reserved2; /* 0x02 */
- U8 ConfigNum; /* 0x03 */
- U32 Flags; /* 0x04 */
- MPI2_EVENT_IR_CONFIG_ELEMENT ConfigElement[MPI2_EVENT_IR_CONFIG_ELEMENT_COUNT]; /* 0x08 */
-} MPI2_EVENT_DATA_IR_CONFIG_CHANGE_LIST,
- MPI2_POINTER PTR_MPI2_EVENT_DATA_IR_CONFIG_CHANGE_LIST,
- Mpi2EventDataIrConfigChangeList_t,
- MPI2_POINTER pMpi2EventDataIrConfigChangeList_t;
-
-/* IR Configuration Change List Event data Flags values */
-#define MPI2_EVENT_IR_CHANGE_FLAGS_FOREIGN_CONFIG (0x00000001)
-
-
-/* SAS Discovery Event data */
-
-typedef struct _MPI2_EVENT_DATA_SAS_DISCOVERY
-{
- U8 Flags; /* 0x00 */
- U8 ReasonCode; /* 0x01 */
- U8 PhysicalPort; /* 0x02 */
- U8 Reserved1; /* 0x03 */
- U32 DiscoveryStatus; /* 0x04 */
-} MPI2_EVENT_DATA_SAS_DISCOVERY,
- MPI2_POINTER PTR_MPI2_EVENT_DATA_SAS_DISCOVERY,
- Mpi2EventDataSasDiscovery_t, MPI2_POINTER pMpi2EventDataSasDiscovery_t;
-
-/* SAS Discovery Event data Flags values */
-#define MPI2_EVENT_SAS_DISC_DEVICE_CHANGE (0x02)
-#define MPI2_EVENT_SAS_DISC_IN_PROGRESS (0x01)
-
-/* SAS Discovery Event data ReasonCode values */
-#define MPI2_EVENT_SAS_DISC_RC_STARTED (0x01)
-#define MPI2_EVENT_SAS_DISC_RC_COMPLETED (0x02)
-
-/* SAS Discovery Event data DiscoveryStatus values */
-#define MPI2_EVENT_SAS_DISC_DS_MAX_ENCLOSURES_EXCEED (0x80000000)
-#define MPI2_EVENT_SAS_DISC_DS_MAX_EXPANDERS_EXCEED (0x40000000)
-#define MPI2_EVENT_SAS_DISC_DS_MAX_DEVICES_EXCEED (0x20000000)
-#define MPI2_EVENT_SAS_DISC_DS_MAX_TOPO_PHYS_EXCEED (0x10000000)
-#define MPI2_EVENT_SAS_DISC_DS_DOWNSTREAM_INITIATOR (0x08000000)
-#define MPI2_EVENT_SAS_DISC_DS_MULTI_SUBTRACTIVE_SUBTRACTIVE (0x00008000)
-#define MPI2_EVENT_SAS_DISC_DS_EXP_MULTI_SUBTRACTIVE (0x00004000)
-#define MPI2_EVENT_SAS_DISC_DS_MULTI_PORT_DOMAIN (0x00002000)
-#define MPI2_EVENT_SAS_DISC_DS_TABLE_TO_SUBTRACTIVE_LINK (0x00001000)
-#define MPI2_EVENT_SAS_DISC_DS_UNSUPPORTED_DEVICE (0x00000800)
-#define MPI2_EVENT_SAS_DISC_DS_TABLE_LINK (0x00000400)
-#define MPI2_EVENT_SAS_DISC_DS_SUBTRACTIVE_LINK (0x00000200)
-#define MPI2_EVENT_SAS_DISC_DS_SMP_CRC_ERROR (0x00000100)
-#define MPI2_EVENT_SAS_DISC_DS_SMP_FUNCTION_FAILED (0x00000080)
-#define MPI2_EVENT_SAS_DISC_DS_INDEX_NOT_EXIST (0x00000040)
-#define MPI2_EVENT_SAS_DISC_DS_OUT_ROUTE_ENTRIES (0x00000020)
-#define MPI2_EVENT_SAS_DISC_DS_SMP_TIMEOUT (0x00000010)
-#define MPI2_EVENT_SAS_DISC_DS_MULTIPLE_PORTS (0x00000004)
-#define MPI2_EVENT_SAS_DISC_DS_UNADDRESSABLE_DEVICE (0x00000002)
-#define MPI2_EVENT_SAS_DISC_DS_LOOP_DETECTED (0x00000001)
-
-
-/* SAS Broadcast Primitive Event data */
-
-typedef struct _MPI2_EVENT_DATA_SAS_BROADCAST_PRIMITIVE
-{
- U8 PhyNum; /* 0x00 */
- U8 Port; /* 0x01 */
- U8 PortWidth; /* 0x02 */
- U8 Primitive; /* 0x03 */
-} MPI2_EVENT_DATA_SAS_BROADCAST_PRIMITIVE,
- MPI2_POINTER PTR_MPI2_EVENT_DATA_SAS_BROADCAST_PRIMITIVE,
- Mpi2EventDataSasBroadcastPrimitive_t,
- MPI2_POINTER pMpi2EventDataSasBroadcastPrimitive_t;
-
-/* defines for the Primitive field */
-#define MPI2_EVENT_PRIMITIVE_CHANGE (0x01)
-#define MPI2_EVENT_PRIMITIVE_SES (0x02)
-#define MPI2_EVENT_PRIMITIVE_EXPANDER (0x03)
-#define MPI2_EVENT_PRIMITIVE_ASYNCHRONOUS_EVENT (0x04)
-#define MPI2_EVENT_PRIMITIVE_RESERVED3 (0x05)
-#define MPI2_EVENT_PRIMITIVE_RESERVED4 (0x06)
-#define MPI2_EVENT_PRIMITIVE_CHANGE0_RESERVED (0x07)
-#define MPI2_EVENT_PRIMITIVE_CHANGE1_RESERVED (0x08)
-
-/* SAS Notify Primitive Event data */
-
-typedef struct _MPI2_EVENT_DATA_SAS_NOTIFY_PRIMITIVE {
- U8 PhyNum; /* 0x00 */
- U8 Port; /* 0x01 */
- U8 Reserved1; /* 0x02 */
- U8 Primitive; /* 0x03 */
-} MPI2_EVENT_DATA_SAS_NOTIFY_PRIMITIVE,
-MPI2_POINTER PTR_MPI2_EVENT_DATA_SAS_NOTIFY_PRIMITIVE,
-Mpi2EventDataSasNotifyPrimitive_t,
-MPI2_POINTER pMpi2EventDataSasNotifyPrimitive_t;
-
-/* defines for the Primitive field */
-#define MPI2_EVENT_NOTIFY_ENABLE_SPINUP (0x01)
-#define MPI2_EVENT_NOTIFY_POWER_LOSS_EXPECTED (0x02)
-#define MPI2_EVENT_NOTIFY_RESERVED1 (0x03)
-#define MPI2_EVENT_NOTIFY_RESERVED2 (0x04)
-
-
-/* SAS Initiator Device Status Change Event data */
-
-typedef struct _MPI2_EVENT_DATA_SAS_INIT_DEV_STATUS_CHANGE
-{
- U8 ReasonCode; /* 0x00 */
- U8 PhysicalPort; /* 0x01 */
- U16 DevHandle; /* 0x02 */
- U64 SASAddress; /* 0x04 */
-} MPI2_EVENT_DATA_SAS_INIT_DEV_STATUS_CHANGE,
- MPI2_POINTER PTR_MPI2_EVENT_DATA_SAS_INIT_DEV_STATUS_CHANGE,
- Mpi2EventDataSasInitDevStatusChange_t,
- MPI2_POINTER pMpi2EventDataSasInitDevStatusChange_t;
-
-/* SAS Initiator Device Status Change event ReasonCode values */
-#define MPI2_EVENT_SAS_INIT_RC_ADDED (0x01)
-#define MPI2_EVENT_SAS_INIT_RC_NOT_RESPONDING (0x02)
-
-
-/* SAS Initiator Device Table Overflow Event data */
-
-typedef struct _MPI2_EVENT_DATA_SAS_INIT_TABLE_OVERFLOW
-{
- U16 MaxInit; /* 0x00 */
- U16 CurrentInit; /* 0x02 */
- U64 SASAddress; /* 0x04 */
-} MPI2_EVENT_DATA_SAS_INIT_TABLE_OVERFLOW,
- MPI2_POINTER PTR_MPI2_EVENT_DATA_SAS_INIT_TABLE_OVERFLOW,
- Mpi2EventDataSasInitTableOverflow_t,
- MPI2_POINTER pMpi2EventDataSasInitTableOverflow_t;
-
-
-/* SAS Topology Change List Event data */
-
-/*
- * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
- * one and check NumEntries at runtime.
- */
-#ifndef MPI2_EVENT_SAS_TOPO_PHY_COUNT
-#define MPI2_EVENT_SAS_TOPO_PHY_COUNT (1)
-#endif
-
-typedef struct _MPI2_EVENT_SAS_TOPO_PHY_ENTRY
-{
- U16 AttachedDevHandle; /* 0x00 */
- U8 LinkRate; /* 0x02 */
- U8 PhyStatus; /* 0x03 */
-} MPI2_EVENT_SAS_TOPO_PHY_ENTRY, MPI2_POINTER PTR_MPI2_EVENT_SAS_TOPO_PHY_ENTRY,
- Mpi2EventSasTopoPhyEntry_t, MPI2_POINTER pMpi2EventSasTopoPhyEntry_t;
-
-typedef struct _MPI2_EVENT_DATA_SAS_TOPOLOGY_CHANGE_LIST
-{
- U16 EnclosureHandle; /* 0x00 */
- U16 ExpanderDevHandle; /* 0x02 */
- U8 NumPhys; /* 0x04 */
- U8 Reserved1; /* 0x05 */
- U16 Reserved2; /* 0x06 */
- U8 NumEntries; /* 0x08 */
- U8 StartPhyNum; /* 0x09 */
- U8 ExpStatus; /* 0x0A */
- U8 PhysicalPort; /* 0x0B */
- MPI2_EVENT_SAS_TOPO_PHY_ENTRY PHY[MPI2_EVENT_SAS_TOPO_PHY_COUNT]; /* 0x0C*/
-} MPI2_EVENT_DATA_SAS_TOPOLOGY_CHANGE_LIST,
- MPI2_POINTER PTR_MPI2_EVENT_DATA_SAS_TOPOLOGY_CHANGE_LIST,
- Mpi2EventDataSasTopologyChangeList_t,
- MPI2_POINTER pMpi2EventDataSasTopologyChangeList_t;
-
-/* values for the ExpStatus field */
-#define MPI2_EVENT_SAS_TOPO_ES_NO_EXPANDER (0x00)
-#define MPI2_EVENT_SAS_TOPO_ES_ADDED (0x01)
-#define MPI2_EVENT_SAS_TOPO_ES_NOT_RESPONDING (0x02)
-#define MPI2_EVENT_SAS_TOPO_ES_RESPONDING (0x03)
-#define MPI2_EVENT_SAS_TOPO_ES_DELAY_NOT_RESPONDING (0x04)
-
-/* defines for the LinkRate field */
-#define MPI2_EVENT_SAS_TOPO_LR_CURRENT_MASK (0xF0)
-#define MPI2_EVENT_SAS_TOPO_LR_CURRENT_SHIFT (4)
-#define MPI2_EVENT_SAS_TOPO_LR_PREV_MASK (0x0F)
-#define MPI2_EVENT_SAS_TOPO_LR_PREV_SHIFT (0)
-
-#define MPI2_EVENT_SAS_TOPO_LR_UNKNOWN_LINK_RATE (0x00)
-#define MPI2_EVENT_SAS_TOPO_LR_PHY_DISABLED (0x01)
-#define MPI2_EVENT_SAS_TOPO_LR_NEGOTIATION_FAILED (0x02)
-#define MPI2_EVENT_SAS_TOPO_LR_SATA_OOB_COMPLETE (0x03)
-#define MPI2_EVENT_SAS_TOPO_LR_PORT_SELECTOR (0x04)
-#define MPI2_EVENT_SAS_TOPO_LR_SMP_RESET_IN_PROGRESS (0x05)
-#define MPI2_EVENT_SAS_TOPO_LR_UNSUPPORTED_PHY (0x06)
-#define MPI2_EVENT_SAS_TOPO_LR_RATE_1_5 (0x08)
-#define MPI2_EVENT_SAS_TOPO_LR_RATE_3_0 (0x09)
-#define MPI2_EVENT_SAS_TOPO_LR_RATE_6_0 (0x0A)
-
-/* values for the PhyStatus field */
-#define MPI2_EVENT_SAS_TOPO_PHYSTATUS_VACANT (0x80)
-#define MPI2_EVENT_SAS_TOPO_PS_MULTIPLEX_CHANGE (0x10)
-/* values for the PhyStatus ReasonCode sub-field */
-#define MPI2_EVENT_SAS_TOPO_RC_MASK (0x0F)
-#define MPI2_EVENT_SAS_TOPO_RC_TARG_ADDED (0x01)
-#define MPI2_EVENT_SAS_TOPO_RC_TARG_NOT_RESPONDING (0x02)
-#define MPI2_EVENT_SAS_TOPO_RC_PHY_CHANGED (0x03)
-#define MPI2_EVENT_SAS_TOPO_RC_NO_CHANGE (0x04)
-#define MPI2_EVENT_SAS_TOPO_RC_DELAY_NOT_RESPONDING (0x05)
-
-
-/* SAS Enclosure Device Status Change Event data */
-
-typedef struct _MPI2_EVENT_DATA_SAS_ENCL_DEV_STATUS_CHANGE
-{
- U16 EnclosureHandle; /* 0x00 */
- U8 ReasonCode; /* 0x02 */
- U8 PhysicalPort; /* 0x03 */
- U64 EnclosureLogicalID; /* 0x04 */
- U16 NumSlots; /* 0x0C */
- U16 StartSlot; /* 0x0E */
- U32 PhyBits; /* 0x10 */
-} MPI2_EVENT_DATA_SAS_ENCL_DEV_STATUS_CHANGE,
- MPI2_POINTER PTR_MPI2_EVENT_DATA_SAS_ENCL_DEV_STATUS_CHANGE,
- Mpi2EventDataSasEnclDevStatusChange_t,
- MPI2_POINTER pMpi2EventDataSasEnclDevStatusChange_t;
-
-/* SAS Enclosure Device Status Change event ReasonCode values */
-#define MPI2_EVENT_SAS_ENCL_RC_ADDED (0x01)
-#define MPI2_EVENT_SAS_ENCL_RC_NOT_RESPONDING (0x02)
-
-
-/* SAS PHY Counter Event data */
-
-typedef struct _MPI2_EVENT_DATA_SAS_PHY_COUNTER {
- U64 TimeStamp; /* 0x00 */
- U32 Reserved1; /* 0x08 */
- U8 PhyEventCode; /* 0x0C */
- U8 PhyNum; /* 0x0D */
- U16 Reserved2; /* 0x0E */
- U32 PhyEventInfo; /* 0x10 */
- U8 CounterType; /* 0x14 */
- U8 ThresholdWindow; /* 0x15 */
- U8 TimeUnits; /* 0x16 */
- U8 Reserved3; /* 0x17 */
- U32 EventThreshold; /* 0x18 */
- U16 ThresholdFlags; /* 0x1C */
- U16 Reserved4; /* 0x1E */
-} MPI2_EVENT_DATA_SAS_PHY_COUNTER,
- MPI2_POINTER PTR_MPI2_EVENT_DATA_SAS_PHY_COUNTER,
- Mpi2EventDataSasPhyCounter_t, MPI2_POINTER pMpi2EventDataSasPhyCounter_t;
-
-/* use MPI2_SASPHY3_EVENT_CODE_ values from mpi2_cnfg.h for the
- * PhyEventCode field
- * use MPI2_SASPHY3_COUNTER_TYPE_ values from mpi2_cnfg.h for the
- * CounterType field
- * use MPI2_SASPHY3_TIME_UNITS_ values from mpi2_cnfg.h for the
- * TimeUnits field
- * use MPI2_SASPHY3_TFLAGS_ values from mpi2_cnfg.h for the
- * ThresholdFlags field
- * */
-
-
-/* SAS Quiesce Event data */
-
-typedef struct _MPI2_EVENT_DATA_SAS_QUIESCE {
- U8 ReasonCode; /* 0x00 */
- U8 Reserved1; /* 0x01 */
- U16 Reserved2; /* 0x02 */
- U32 Reserved3; /* 0x04 */
-} MPI2_EVENT_DATA_SAS_QUIESCE,
- MPI2_POINTER PTR_MPI2_EVENT_DATA_SAS_QUIESCE,
- Mpi2EventDataSasQuiesce_t, MPI2_POINTER pMpi2EventDataSasQuiesce_t;
-
-/* SAS Quiesce Event data ReasonCode values */
-#define MPI2_EVENT_SAS_QUIESCE_RC_STARTED (0x01)
-#define MPI2_EVENT_SAS_QUIESCE_RC_COMPLETED (0x02)
-
-
-/* Host Based Discovery Phy Event data */
-
-typedef struct _MPI2_EVENT_HBD_PHY_SAS {
- U8 Flags; /* 0x00 */
- U8 NegotiatedLinkRate; /* 0x01 */
- U8 PhyNum; /* 0x02 */
- U8 PhysicalPort; /* 0x03 */
- U32 Reserved1; /* 0x04 */
- U8 InitialFrame[28]; /* 0x08 */
-} MPI2_EVENT_HBD_PHY_SAS, MPI2_POINTER PTR_MPI2_EVENT_HBD_PHY_SAS,
- Mpi2EventHbdPhySas_t, MPI2_POINTER pMpi2EventHbdPhySas_t;
-
-/* values for the Flags field */
-#define MPI2_EVENT_HBD_SAS_FLAGS_FRAME_VALID (0x02)
-#define MPI2_EVENT_HBD_SAS_FLAGS_SATA_FRAME (0x01)
-
-/* use MPI2_SAS_NEG_LINK_RATE_ defines from mpi2_cnfg.h for
- * the NegotiatedLinkRate field */
-
-typedef union _MPI2_EVENT_HBD_DESCRIPTOR {
- MPI2_EVENT_HBD_PHY_SAS Sas;
-} MPI2_EVENT_HBD_DESCRIPTOR, MPI2_POINTER PTR_MPI2_EVENT_HBD_DESCRIPTOR,
- Mpi2EventHbdDescriptor_t, MPI2_POINTER pMpi2EventHbdDescriptor_t;
-
-typedef struct _MPI2_EVENT_DATA_HBD_PHY {
- U8 DescriptorType; /* 0x00 */
- U8 Reserved1; /* 0x01 */
- U16 Reserved2; /* 0x02 */
- U32 Reserved3; /* 0x04 */
- MPI2_EVENT_HBD_DESCRIPTOR Descriptor; /* 0x08 */
-} MPI2_EVENT_DATA_HBD_PHY, MPI2_POINTER PTR_MPI2_EVENT_DATA_HBD_PHY,
- Mpi2EventDataHbdPhy_t, MPI2_POINTER pMpi2EventDataMpi2EventDataHbdPhy_t;
-
-/* values for the DescriptorType field */
-#define MPI2_EVENT_HBD_DT_SAS (0x01)
-
-
-
-/****************************************************************************
-* EventAck message
-****************************************************************************/
-
-/* EventAck Request message */
-typedef struct _MPI2_EVENT_ACK_REQUEST
-{
- U16 Reserved1; /* 0x00 */
- U8 ChainOffset; /* 0x02 */
- U8 Function; /* 0x03 */
- U16 Reserved2; /* 0x04 */
- U8 Reserved3; /* 0x06 */
- U8 MsgFlags; /* 0x07 */
- U8 VP_ID; /* 0x08 */
- U8 VF_ID; /* 0x09 */
- U16 Reserved4; /* 0x0A */
- U16 Event; /* 0x0C */
- U16 Reserved5; /* 0x0E */
- U32 EventContext; /* 0x10 */
-} MPI2_EVENT_ACK_REQUEST, MPI2_POINTER PTR_MPI2_EVENT_ACK_REQUEST,
- Mpi2EventAckRequest_t, MPI2_POINTER pMpi2EventAckRequest_t;
-
-
-/* EventAck Reply message */
-typedef struct _MPI2_EVENT_ACK_REPLY
-{
- U16 Reserved1; /* 0x00 */
- U8 MsgLength; /* 0x02 */
- U8 Function; /* 0x03 */
- U16 Reserved2; /* 0x04 */
- U8 Reserved3; /* 0x06 */
- U8 MsgFlags; /* 0x07 */
- U8 VP_ID; /* 0x08 */
- U8 VF_ID; /* 0x09 */
- U16 Reserved4; /* 0x0A */
- U16 Reserved5; /* 0x0C */
- U16 IOCStatus; /* 0x0E */
- U32 IOCLogInfo; /* 0x10 */
-} MPI2_EVENT_ACK_REPLY, MPI2_POINTER PTR_MPI2_EVENT_ACK_REPLY,
- Mpi2EventAckReply_t, MPI2_POINTER pMpi2EventAckReply_t;
-
-
-/****************************************************************************
-* SendHostMessage message
-****************************************************************************/
-
-/* SendHostMessage Request message */
-typedef struct _MPI2_SEND_HOST_MESSAGE_REQUEST {
- U16 HostDataLength; /* 0x00 */
- U8 ChainOffset; /* 0x02 */
- U8 Function; /* 0x03 */
- U16 Reserved1; /* 0x04 */
- U8 Reserved2; /* 0x06 */
- U8 MsgFlags; /* 0x07 */
- U8 VP_ID; /* 0x08 */
- U8 VF_ID; /* 0x09 */
- U16 Reserved3; /* 0x0A */
- U8 Reserved4; /* 0x0C */
- U8 DestVF_ID; /* 0x0D */
- U16 Reserved5; /* 0x0E */
- U32 Reserved6; /* 0x10 */
- U32 Reserved7; /* 0x14 */
- U32 Reserved8; /* 0x18 */
- U32 Reserved9; /* 0x1C */
- U32 Reserved10; /* 0x20 */
- U32 HostData[1]; /* 0x24 */
-} MPI2_SEND_HOST_MESSAGE_REQUEST,
-MPI2_POINTER PTR_MPI2_SEND_HOST_MESSAGE_REQUEST,
-Mpi2SendHostMessageRequest_t, MPI2_POINTER pMpi2SendHostMessageRequest_t;
-
-
-/* SendHostMessage Reply message */
-typedef struct _MPI2_SEND_HOST_MESSAGE_REPLY {
- U16 HostDataLength; /* 0x00 */
- U8 MsgLength; /* 0x02 */
- U8 Function; /* 0x03 */
- U16 Reserved1; /* 0x04 */
- U8 Reserved2; /* 0x06 */
- U8 MsgFlags; /* 0x07 */
- U8 VP_ID; /* 0x08 */
- U8 VF_ID; /* 0x09 */
- U16 Reserved3; /* 0x0A */
- U16 Reserved4; /* 0x0C */
- U16 IOCStatus; /* 0x0E */
- U32 IOCLogInfo; /* 0x10 */
-} MPI2_SEND_HOST_MESSAGE_REPLY, MPI2_POINTER PTR_MPI2_SEND_HOST_MESSAGE_REPLY,
-Mpi2SendHostMessageReply_t, MPI2_POINTER pMpi2SendHostMessageReply_t;
-
-
-/****************************************************************************
-* FWDownload message
-****************************************************************************/
-
-/* FWDownload Request message */
-typedef struct _MPI2_FW_DOWNLOAD_REQUEST
-{
- U8 ImageType; /* 0x00 */
- U8 Reserved1; /* 0x01 */
- U8 ChainOffset; /* 0x02 */
- U8 Function; /* 0x03 */
- U16 Reserved2; /* 0x04 */
- U8 Reserved3; /* 0x06 */
- U8 MsgFlags; /* 0x07 */
- U8 VP_ID; /* 0x08 */
- U8 VF_ID; /* 0x09 */
- U16 Reserved4; /* 0x0A */
- U32 TotalImageSize; /* 0x0C */
- U32 Reserved5; /* 0x10 */
- MPI2_MPI_SGE_UNION SGL; /* 0x14 */
-} MPI2_FW_DOWNLOAD_REQUEST, MPI2_POINTER PTR_MPI2_FW_DOWNLOAD_REQUEST,
- Mpi2FWDownloadRequest, MPI2_POINTER pMpi2FWDownloadRequest;
-
-#define MPI2_FW_DOWNLOAD_MSGFLGS_LAST_SEGMENT (0x01)
-
-#define MPI2_FW_DOWNLOAD_ITYPE_FW (0x01)
-#define MPI2_FW_DOWNLOAD_ITYPE_BIOS (0x02)
-#define MPI2_FW_DOWNLOAD_ITYPE_MANUFACTURING (0x06)
-#define MPI2_FW_DOWNLOAD_ITYPE_CONFIG_1 (0x07)
-#define MPI2_FW_DOWNLOAD_ITYPE_CONFIG_2 (0x08)
-#define MPI2_FW_DOWNLOAD_ITYPE_MEGARAID (0x09)
-#define MPI2_FW_DOWNLOAD_ITYPE_COMPLETE (0x0A)
-#define MPI2_FW_DOWNLOAD_ITYPE_COMMON_BOOT_BLOCK (0x0B)
-#define MPI2_FW_DOWNLOAD_ITYPE_PUBLIC_KEY (0x0C)
-#define MPI2_FW_DOWNLOAD_ITYPE_MIN_PRODUCT_SPECIFIC (0xF0)
-
-/* FWDownload TransactionContext Element */
-typedef struct _MPI2_FW_DOWNLOAD_TCSGE
-{
- U8 Reserved1; /* 0x00 */
- U8 ContextSize; /* 0x01 */
- U8 DetailsLength; /* 0x02 */
- U8 Flags; /* 0x03 */
- U32 Reserved2; /* 0x04 */
- U32 ImageOffset; /* 0x08 */
- U32 ImageSize; /* 0x0C */
-} MPI2_FW_DOWNLOAD_TCSGE, MPI2_POINTER PTR_MPI2_FW_DOWNLOAD_TCSGE,
- Mpi2FWDownloadTCSGE_t, MPI2_POINTER pMpi2FWDownloadTCSGE_t;
-
-/* FWDownload Reply message */
-typedef struct _MPI2_FW_DOWNLOAD_REPLY
-{
- U8 ImageType; /* 0x00 */
- U8 Reserved1; /* 0x01 */
- U8 MsgLength; /* 0x02 */
- U8 Function; /* 0x03 */
- U16 Reserved2; /* 0x04 */
- U8 Reserved3; /* 0x06 */
- U8 MsgFlags; /* 0x07 */
- U8 VP_ID; /* 0x08 */
- U8 VF_ID; /* 0x09 */
- U16 Reserved4; /* 0x0A */
- U16 Reserved5; /* 0x0C */
- U16 IOCStatus; /* 0x0E */
- U32 IOCLogInfo; /* 0x10 */
-} MPI2_FW_DOWNLOAD_REPLY, MPI2_POINTER PTR_MPI2_FW_DOWNLOAD_REPLY,
- Mpi2FWDownloadReply_t, MPI2_POINTER pMpi2FWDownloadReply_t;
-
-
-/****************************************************************************
-* FWUpload message
-****************************************************************************/
-
-/* FWUpload Request message */
-typedef struct _MPI2_FW_UPLOAD_REQUEST
-{
- U8 ImageType; /* 0x00 */
- U8 Reserved1; /* 0x01 */
- U8 ChainOffset; /* 0x02 */
- U8 Function; /* 0x03 */
- U16 Reserved2; /* 0x04 */
- U8 Reserved3; /* 0x06 */
- U8 MsgFlags; /* 0x07 */
- U8 VP_ID; /* 0x08 */
- U8 VF_ID; /* 0x09 */
- U16 Reserved4; /* 0x0A */
- U32 Reserved5; /* 0x0C */
- U32 Reserved6; /* 0x10 */
- MPI2_MPI_SGE_UNION SGL; /* 0x14 */
-} MPI2_FW_UPLOAD_REQUEST, MPI2_POINTER PTR_MPI2_FW_UPLOAD_REQUEST,
- Mpi2FWUploadRequest_t, MPI2_POINTER pMpi2FWUploadRequest_t;
-
-#define MPI2_FW_UPLOAD_ITYPE_FW_CURRENT (0x00)
-#define MPI2_FW_UPLOAD_ITYPE_FW_FLASH (0x01)
-#define MPI2_FW_UPLOAD_ITYPE_BIOS_FLASH (0x02)
-#define MPI2_FW_UPLOAD_ITYPE_FW_BACKUP (0x05)
-#define MPI2_FW_UPLOAD_ITYPE_MANUFACTURING (0x06)
-#define MPI2_FW_UPLOAD_ITYPE_CONFIG_1 (0x07)
-#define MPI2_FW_UPLOAD_ITYPE_CONFIG_2 (0x08)
-#define MPI2_FW_UPLOAD_ITYPE_MEGARAID (0x09)
-#define MPI2_FW_UPLOAD_ITYPE_COMPLETE (0x0A)
-#define MPI2_FW_UPLOAD_ITYPE_COMMON_BOOT_BLOCK (0x0B)
-
-typedef struct _MPI2_FW_UPLOAD_TCSGE
-{
- U8 Reserved1; /* 0x00 */
- U8 ContextSize; /* 0x01 */
- U8 DetailsLength; /* 0x02 */
- U8 Flags; /* 0x03 */
- U32 Reserved2; /* 0x04 */
- U32 ImageOffset; /* 0x08 */
- U32 ImageSize; /* 0x0C */
-} MPI2_FW_UPLOAD_TCSGE, MPI2_POINTER PTR_MPI2_FW_UPLOAD_TCSGE,
- Mpi2FWUploadTCSGE_t, MPI2_POINTER pMpi2FWUploadTCSGE_t;
-
-/* FWUpload Reply message */
-typedef struct _MPI2_FW_UPLOAD_REPLY
-{
- U8 ImageType; /* 0x00 */
- U8 Reserved1; /* 0x01 */
- U8 MsgLength; /* 0x02 */
- U8 Function; /* 0x03 */
- U16 Reserved2; /* 0x04 */
- U8 Reserved3; /* 0x06 */
- U8 MsgFlags; /* 0x07 */
- U8 VP_ID; /* 0x08 */
- U8 VF_ID; /* 0x09 */
- U16 Reserved4; /* 0x0A */
- U16 Reserved5; /* 0x0C */
- U16 IOCStatus; /* 0x0E */
- U32 IOCLogInfo; /* 0x10 */
- U32 ActualImageSize; /* 0x14 */
-} MPI2_FW_UPLOAD_REPLY, MPI2_POINTER PTR_MPI2_FW_UPLOAD_REPLY,
- Mpi2FWUploadReply_t, MPI2_POINTER pMPi2FWUploadReply_t;
-
-
-/* FW Image Header */
-typedef struct _MPI2_FW_IMAGE_HEADER
-{
- U32 Signature; /* 0x00 */
- U32 Signature0; /* 0x04 */
- U32 Signature1; /* 0x08 */
- U32 Signature2; /* 0x0C */
- MPI2_VERSION_UNION MPIVersion; /* 0x10 */
- MPI2_VERSION_UNION FWVersion; /* 0x14 */
- MPI2_VERSION_UNION NVDATAVersion; /* 0x18 */
- MPI2_VERSION_UNION PackageVersion; /* 0x1C */
- U16 VendorID; /* 0x20 */
- U16 ProductID; /* 0x22 */
- U16 ProtocolFlags; /* 0x24 */
- U16 Reserved26; /* 0x26 */
- U32 IOCCapabilities; /* 0x28 */
- U32 ImageSize; /* 0x2C */
- U32 NextImageHeaderOffset; /* 0x30 */
- U32 Checksum; /* 0x34 */
- U32 Reserved38; /* 0x38 */
- U32 Reserved3C; /* 0x3C */
- U32 Reserved40; /* 0x40 */
- U32 Reserved44; /* 0x44 */
- U32 Reserved48; /* 0x48 */
- U32 Reserved4C; /* 0x4C */
- U32 Reserved50; /* 0x50 */
- U32 Reserved54; /* 0x54 */
- U32 Reserved58; /* 0x58 */
- U32 Reserved5C; /* 0x5C */
- U32 Reserved60; /* 0x60 */
- U32 FirmwareVersionNameWhat; /* 0x64 */
- U8 FirmwareVersionName[32]; /* 0x68 */
- U32 VendorNameWhat; /* 0x88 */
- U8 VendorName[32]; /* 0x8C */
- U32 PackageNameWhat; /* 0x88 */
- U8 PackageName[32]; /* 0x8C */
- U32 ReservedD0; /* 0xD0 */
- U32 ReservedD4; /* 0xD4 */
- U32 ReservedD8; /* 0xD8 */
- U32 ReservedDC; /* 0xDC */
- U32 ReservedE0; /* 0xE0 */
- U32 ReservedE4; /* 0xE4 */
- U32 ReservedE8; /* 0xE8 */
- U32 ReservedEC; /* 0xEC */
- U32 ReservedF0; /* 0xF0 */
- U32 ReservedF4; /* 0xF4 */
- U32 ReservedF8; /* 0xF8 */
- U32 ReservedFC; /* 0xFC */
-} MPI2_FW_IMAGE_HEADER, MPI2_POINTER PTR_MPI2_FW_IMAGE_HEADER,
- Mpi2FWImageHeader_t, MPI2_POINTER pMpi2FWImageHeader_t;
-
-/* Signature field */
-#define MPI2_FW_HEADER_SIGNATURE_OFFSET (0x00)
-#define MPI2_FW_HEADER_SIGNATURE_MASK (0xFF000000)
-#define MPI2_FW_HEADER_SIGNATURE (0xEA000000)
-
-/* Signature0 field */
-#define MPI2_FW_HEADER_SIGNATURE0_OFFSET (0x04)
-#define MPI2_FW_HEADER_SIGNATURE0 (0x5AFAA55A)
-
-/* Signature1 field */
-#define MPI2_FW_HEADER_SIGNATURE1_OFFSET (0x08)
-#define MPI2_FW_HEADER_SIGNATURE1 (0xA55AFAA5)
-
-/* Signature2 field */
-#define MPI2_FW_HEADER_SIGNATURE2_OFFSET (0x0C)
-#define MPI2_FW_HEADER_SIGNATURE2 (0x5AA55AFA)
-
-
-/* defines for using the ProductID field */
-#define MPI2_FW_HEADER_PID_TYPE_MASK (0xF000)
-#define MPI2_FW_HEADER_PID_TYPE_SAS (0x2000)
-
-#define MPI2_FW_HEADER_PID_PROD_MASK (0x0F00)
-#define MPI2_FW_HEADER_PID_PROD_A (0x0000)
-#define MPI2_FW_HEADER_PID_PROD_TARGET_INITIATOR_SCSI (0x0200)
-#define MPI2_FW_HEADER_PID_PROD_IR_SCSI (0x0700)
-
-
-#define MPI2_FW_HEADER_PID_FAMILY_MASK (0x00FF)
-/* SAS */
-#define MPI2_FW_HEADER_PID_FAMILY_2108_SAS (0x0013)
-#define MPI2_FW_HEADER_PID_FAMILY_2208_SAS (0x0014)
-
-/* use MPI2_IOCFACTS_PROTOCOL_ defines for ProtocolFlags field */
-
-/* use MPI2_IOCFACTS_CAPABILITY_ defines for IOCCapabilities field */
-
-
-#define MPI2_FW_HEADER_IMAGESIZE_OFFSET (0x2C)
-#define MPI2_FW_HEADER_NEXTIMAGE_OFFSET (0x30)
-#define MPI2_FW_HEADER_VERNMHWAT_OFFSET (0x64)
-
-#define MPI2_FW_HEADER_WHAT_SIGNATURE (0x29232840)
-
-#define MPI2_FW_HEADER_SIZE (0x100)
-
-
-/* Extended Image Header */
-typedef struct _MPI2_EXT_IMAGE_HEADER
-
-{
- U8 ImageType; /* 0x00 */
- U8 Reserved1; /* 0x01 */
- U16 Reserved2; /* 0x02 */
- U32 Checksum; /* 0x04 */
- U32 ImageSize; /* 0x08 */
- U32 NextImageHeaderOffset; /* 0x0C */
- U32 PackageVersion; /* 0x10 */
- U32 Reserved3; /* 0x14 */
- U32 Reserved4; /* 0x18 */
- U32 Reserved5; /* 0x1C */
- U8 IdentifyString[32]; /* 0x20 */
-} MPI2_EXT_IMAGE_HEADER, MPI2_POINTER PTR_MPI2_EXT_IMAGE_HEADER,
- Mpi2ExtImageHeader_t, MPI2_POINTER pMpi2ExtImageHeader_t;
-
-/* useful offsets */
-#define MPI2_EXT_IMAGE_IMAGETYPE_OFFSET (0x00)
-#define MPI2_EXT_IMAGE_IMAGESIZE_OFFSET (0x08)
-#define MPI2_EXT_IMAGE_NEXTIMAGE_OFFSET (0x0C)
-
-#define MPI2_EXT_IMAGE_HEADER_SIZE (0x40)
-
-/* defines for the ImageType field */
-#define MPI2_EXT_IMAGE_TYPE_UNSPECIFIED (0x00)
-#define MPI2_EXT_IMAGE_TYPE_FW (0x01)
-#define MPI2_EXT_IMAGE_TYPE_NVDATA (0x03)
-#define MPI2_EXT_IMAGE_TYPE_BOOTLOADER (0x04)
-#define MPI2_EXT_IMAGE_TYPE_INITIALIZATION (0x05)
-#define MPI2_EXT_IMAGE_TYPE_FLASH_LAYOUT (0x06)
-#define MPI2_EXT_IMAGE_TYPE_SUPPORTED_DEVICES (0x07)
-#define MPI2_EXT_IMAGE_TYPE_MEGARAID (0x08)
-#define MPI2_EXT_IMAGE_TYPE_ENCRYPTED_HASH (0x09)
-#define MPI2_EXT_IMAGE_TYPE_MIN_PRODUCT_SPECIFIC (0x80)
-#define MPI2_EXT_IMAGE_TYPE_MAX_PRODUCT_SPECIFIC (0xFF)
-#define MPI2_EXT_IMAGE_TYPE_MAX \
- (MPI2_EXT_IMAGE_TYPE_MAX_PRODUCT_SPECIFIC) /* deprecated */
-
-
-
-/* FLASH Layout Extended Image Data */
-
-/*
- * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
- * one and check RegionsPerLayout at runtime.
- */
-#ifndef MPI2_FLASH_NUMBER_OF_REGIONS
-#define MPI2_FLASH_NUMBER_OF_REGIONS (1)
-#endif
-
-/*
- * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
- * one and check NumberOfLayouts at runtime.
- */
-#ifndef MPI2_FLASH_NUMBER_OF_LAYOUTS
-#define MPI2_FLASH_NUMBER_OF_LAYOUTS (1)
-#endif
-
-typedef struct _MPI2_FLASH_REGION
-{
- U8 RegionType; /* 0x00 */
- U8 Reserved1; /* 0x01 */
- U16 Reserved2; /* 0x02 */
- U32 RegionOffset; /* 0x04 */
- U32 RegionSize; /* 0x08 */
- U32 Reserved3; /* 0x0C */
-} MPI2_FLASH_REGION, MPI2_POINTER PTR_MPI2_FLASH_REGION,
- Mpi2FlashRegion_t, MPI2_POINTER pMpi2FlashRegion_t;
-
-typedef struct _MPI2_FLASH_LAYOUT
-{
- U32 FlashSize; /* 0x00 */
- U32 Reserved1; /* 0x04 */
- U32 Reserved2; /* 0x08 */
- U32 Reserved3; /* 0x0C */
- MPI2_FLASH_REGION Region[MPI2_FLASH_NUMBER_OF_REGIONS];/* 0x10 */
-} MPI2_FLASH_LAYOUT, MPI2_POINTER PTR_MPI2_FLASH_LAYOUT,
- Mpi2FlashLayout_t, MPI2_POINTER pMpi2FlashLayout_t;
-
-typedef struct _MPI2_FLASH_LAYOUT_DATA
-{
- U8 ImageRevision; /* 0x00 */
- U8 Reserved1; /* 0x01 */
- U8 SizeOfRegion; /* 0x02 */
- U8 Reserved2; /* 0x03 */
- U16 NumberOfLayouts; /* 0x04 */
- U16 RegionsPerLayout; /* 0x06 */
- U16 MinimumSectorAlignment; /* 0x08 */
- U16 Reserved3; /* 0x0A */
- U32 Reserved4; /* 0x0C */
- MPI2_FLASH_LAYOUT Layout[MPI2_FLASH_NUMBER_OF_LAYOUTS];/* 0x10 */
-} MPI2_FLASH_LAYOUT_DATA, MPI2_POINTER PTR_MPI2_FLASH_LAYOUT_DATA,
- Mpi2FlashLayoutData_t, MPI2_POINTER pMpi2FlashLayoutData_t;
-
-/* defines for the RegionType field */
-#define MPI2_FLASH_REGION_UNUSED (0x00)
-#define MPI2_FLASH_REGION_FIRMWARE (0x01)
-#define MPI2_FLASH_REGION_BIOS (0x02)
-#define MPI2_FLASH_REGION_NVDATA (0x03)
-#define MPI2_FLASH_REGION_FIRMWARE_BACKUP (0x05)
-#define MPI2_FLASH_REGION_MFG_INFORMATION (0x06)
-#define MPI2_FLASH_REGION_CONFIG_1 (0x07)
-#define MPI2_FLASH_REGION_CONFIG_2 (0x08)
-#define MPI2_FLASH_REGION_MEGARAID (0x09)
-#define MPI2_FLASH_REGION_INIT (0x0A)
-
-/* ImageRevision */
-#define MPI2_FLASH_LAYOUT_IMAGE_REVISION (0x00)
-
-
-
-/* Supported Devices Extended Image Data */
-
-/*
- * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
- * one and check NumberOfDevices at runtime.
- */
-#ifndef MPI2_SUPPORTED_DEVICES_IMAGE_NUM_DEVICES
-#define MPI2_SUPPORTED_DEVICES_IMAGE_NUM_DEVICES (1)
-#endif
-
-typedef struct _MPI2_SUPPORTED_DEVICE
-{
- U16 DeviceID; /* 0x00 */
- U16 VendorID; /* 0x02 */
- U16 DeviceIDMask; /* 0x04 */
- U16 Reserved1; /* 0x06 */
- U8 LowPCIRev; /* 0x08 */
- U8 HighPCIRev; /* 0x09 */
- U16 Reserved2; /* 0x0A */
- U32 Reserved3; /* 0x0C */
-} MPI2_SUPPORTED_DEVICE, MPI2_POINTER PTR_MPI2_SUPPORTED_DEVICE,
- Mpi2SupportedDevice_t, MPI2_POINTER pMpi2SupportedDevice_t;
-
-typedef struct _MPI2_SUPPORTED_DEVICES_DATA
-{
- U8 ImageRevision; /* 0x00 */
- U8 Reserved1; /* 0x01 */
- U8 NumberOfDevices; /* 0x02 */
- U8 Reserved2; /* 0x03 */
- U32 Reserved3; /* 0x04 */
- MPI2_SUPPORTED_DEVICE SupportedDevice[MPI2_SUPPORTED_DEVICES_IMAGE_NUM_DEVICES]; /* 0x08 */
-} MPI2_SUPPORTED_DEVICES_DATA, MPI2_POINTER PTR_MPI2_SUPPORTED_DEVICES_DATA,
- Mpi2SupportedDevicesData_t, MPI2_POINTER pMpi2SupportedDevicesData_t;
-
-/* ImageRevision */
-#define MPI2_SUPPORTED_DEVICES_IMAGE_REVISION (0x00)
-
-
-/* Init Extended Image Data */
-
-typedef struct _MPI2_INIT_IMAGE_FOOTER
-
-{
- U32 BootFlags; /* 0x00 */
- U32 ImageSize; /* 0x04 */
- U32 Signature0; /* 0x08 */
- U32 Signature1; /* 0x0C */
- U32 Signature2; /* 0x10 */
- U32 ResetVector; /* 0x14 */
-} MPI2_INIT_IMAGE_FOOTER, MPI2_POINTER PTR_MPI2_INIT_IMAGE_FOOTER,
- Mpi2InitImageFooter_t, MPI2_POINTER pMpi2InitImageFooter_t;
-
-/* defines for the BootFlags field */
-#define MPI2_INIT_IMAGE_BOOTFLAGS_OFFSET (0x00)
-
-/* defines for the ImageSize field */
-#define MPI2_INIT_IMAGE_IMAGESIZE_OFFSET (0x04)
-
-/* defines for the Signature0 field */
-#define MPI2_INIT_IMAGE_SIGNATURE0_OFFSET (0x08)
-#define MPI2_INIT_IMAGE_SIGNATURE0 (0x5AA55AEA)
-
-/* defines for the Signature1 field */
-#define MPI2_INIT_IMAGE_SIGNATURE1_OFFSET (0x0C)
-#define MPI2_INIT_IMAGE_SIGNATURE1 (0xA55AEAA5)
-
-/* defines for the Signature2 field */
-#define MPI2_INIT_IMAGE_SIGNATURE2_OFFSET (0x10)
-#define MPI2_INIT_IMAGE_SIGNATURE2 (0x5AEAA55A)
-
-/* Signature fields as individual bytes */
-#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_0 (0xEA)
-#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_1 (0x5A)
-#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_2 (0xA5)
-#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_3 (0x5A)
-
-#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_4 (0xA5)
-#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_5 (0xEA)
-#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_6 (0x5A)
-#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_7 (0xA5)
-
-#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_8 (0x5A)
-#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_9 (0xA5)
-#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_A (0xEA)
-#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_B (0x5A)
-
-/* defines for the ResetVector field */
-#define MPI2_INIT_IMAGE_RESETVECTOR_OFFSET (0x14)
-
-
-/* Encrypted Hash Extended Image Data */
-
-typedef struct _MPI25_ENCRYPTED_HASH_ENTRY {
- U8 HashImageType; /* 0x00 */
- U8 HashAlgorithm; /* 0x01 */
- U8 EncryptionAlgorithm; /* 0x02 */
- U8 Reserved1; /* 0x03 */
- U32 Reserved2; /* 0x04 */
- U32 EncryptedHash[1]; /* 0x08 */
-} MPI25_ENCRYPTED_HASH_ENTRY, MPI2_POINTER PTR_MPI25_ENCRYPTED_HASH_ENTRY,
-Mpi25EncryptedHashEntry_t, MPI2_POINTER pMpi25EncryptedHashEntry_t;
-
-/* values for HashImageType */
-#define MPI25_HASH_IMAGE_TYPE_UNUSED (0x00)
-#define MPI25_HASH_IMAGE_TYPE_FIRMWARE (0x01)
-#define MPI25_HASH_IMAGE_TYPE_BIOS (0x02)
-
-/* values for HashAlgorithm */
-#define MPI25_HASH_ALGORITHM_UNUSED (0x00)
-#define MPI25_HASH_ALGORITHM_SHA256 (0x01)
-
-/* values for EncryptionAlgorithm */
-#define MPI25_ENCRYPTION_ALG_UNUSED (0x00)
-#define MPI25_ENCRYPTION_ALG_RSA256 (0x01)
-
-typedef struct _MPI25_ENCRYPTED_HASH_DATA {
- U8 ImageVersion; /* 0x00 */
- U8 NumHash; /* 0x01 */
- U16 Reserved1; /* 0x02 */
- U32 Reserved2; /* 0x04 */
- MPI25_ENCRYPTED_HASH_ENTRY EncryptedHashEntry[1]; /* 0x08 */
-} MPI25_ENCRYPTED_HASH_DATA, MPI2_POINTER PTR_MPI25_ENCRYPTED_HASH_DATA,
-Mpi25EncryptedHashData_t, MPI2_POINTER pMpi25EncryptedHashData_t;
-
-/****************************************************************************
-* PowerManagementControl message
-****************************************************************************/
-
-/* PowerManagementControl Request message */
-typedef struct _MPI2_PWR_MGMT_CONTROL_REQUEST {
- U8 Feature; /* 0x00 */
- U8 Reserved1; /* 0x01 */
- U8 ChainOffset; /* 0x02 */
- U8 Function; /* 0x03 */
- U16 Reserved2; /* 0x04 */
- U8 Reserved3; /* 0x06 */
- U8 MsgFlags; /* 0x07 */
- U8 VP_ID; /* 0x08 */
- U8 VF_ID; /* 0x09 */
- U16 Reserved4; /* 0x0A */
- U8 Parameter1; /* 0x0C */
- U8 Parameter2; /* 0x0D */
- U8 Parameter3; /* 0x0E */
- U8 Parameter4; /* 0x0F */
- U32 Reserved5; /* 0x10 */
- U32 Reserved6; /* 0x14 */
-} MPI2_PWR_MGMT_CONTROL_REQUEST, MPI2_POINTER PTR_MPI2_PWR_MGMT_CONTROL_REQUEST,
- Mpi2PwrMgmtControlRequest_t, MPI2_POINTER pMpi2PwrMgmtControlRequest_t;
-
-/* defines for the Feature field */
-#define MPI2_PM_CONTROL_FEATURE_DA_PHY_POWER_COND (0x01)
-#define MPI2_PM_CONTROL_FEATURE_PORT_WIDTH_MODULATION (0x02)
-#define MPI2_PM_CONTROL_FEATURE_PCIE_LINK (0x03) /* obsolete */
-#define MPI2_PM_CONTROL_FEATURE_IOC_SPEED (0x04)
-#define MPI2_PM_CONTROL_FEATURE_MIN_PRODUCT_SPECIFIC (0x80)
-#define MPI2_PM_CONTROL_FEATURE_MAX_PRODUCT_SPECIFIC (0xFF)
-
-/* parameter usage for the MPI2_PM_CONTROL_FEATURE_DA_PHY_POWER_COND Feature */
-/* Parameter1 contains a PHY number */
-/* Parameter2 indicates power condition action using these defines */
-#define MPI2_PM_CONTROL_PARAM2_PARTIAL (0x01)
-#define MPI2_PM_CONTROL_PARAM2_SLUMBER (0x02)
-#define MPI2_PM_CONTROL_PARAM2_EXIT_PWR_MGMT (0x03)
-/* Parameter3 and Parameter4 are reserved */
-
-/* parameter usage for the MPI2_PM_CONTROL_FEATURE_PORT_WIDTH_MODULATION
- * Feature */
-/* Parameter1 contains SAS port width modulation group number */
-/* Parameter2 indicates IOC action using these defines */
-#define MPI2_PM_CONTROL_PARAM2_REQUEST_OWNERSHIP (0x01)
-#define MPI2_PM_CONTROL_PARAM2_CHANGE_MODULATION (0x02)
-#define MPI2_PM_CONTROL_PARAM2_RELINQUISH_OWNERSHIP (0x03)
-/* Parameter3 indicates desired modulation level using these defines */
-#define MPI2_PM_CONTROL_PARAM3_25_PERCENT (0x00)
-#define MPI2_PM_CONTROL_PARAM3_50_PERCENT (0x01)
-#define MPI2_PM_CONTROL_PARAM3_75_PERCENT (0x02)
-#define MPI2_PM_CONTROL_PARAM3_100_PERCENT (0x03)
-/* Parameter4 is reserved */
-
-/* parameter usage for the MPI2_PM_CONTROL_FEATURE_PCIE_LINK Feature */
-/* Parameter1 indicates desired PCIe link speed using these defines */
-#define MPI2_PM_CONTROL_PARAM1_PCIE_2_5_GBPS (0x00) /* obsolete */
-#define MPI2_PM_CONTROL_PARAM1_PCIE_5_0_GBPS (0x01) /* obsolete */
-#define MPI2_PM_CONTROL_PARAM1_PCIE_8_0_GBPS (0x02) /* obsolete */
-/* Parameter2 indicates desired PCIe link width using these defines */
-#define MPI2_PM_CONTROL_PARAM2_WIDTH_X1 (0x01) /* obsolete */
-#define MPI2_PM_CONTROL_PARAM2_WIDTH_X2 (0x02) /* obsolete */
-#define MPI2_PM_CONTROL_PARAM2_WIDTH_X4 (0x04) /* obsolete */
-#define MPI2_PM_CONTROL_PARAM2_WIDTH_X8 (0x08) /* obsolete */
-/* Parameter3 and Parameter4 are reserved */
-
-/* parameter usage for the MPI2_PM_CONTROL_FEATURE_IOC_SPEED Feature */
-/* Parameter1 indicates desired IOC hardware clock speed using these defines */
-#define MPI2_PM_CONTROL_PARAM1_FULL_IOC_SPEED (0x01)
-#define MPI2_PM_CONTROL_PARAM1_HALF_IOC_SPEED (0x02)
-#define MPI2_PM_CONTROL_PARAM1_QUARTER_IOC_SPEED (0x04)
-#define MPI2_PM_CONTROL_PARAM1_EIGHTH_IOC_SPEED (0x08)
-/* Parameter2, Parameter3, and Parameter4 are reserved */
-
-
-/* PowerManagementControl Reply message */
-typedef struct _MPI2_PWR_MGMT_CONTROL_REPLY {
- U8 Feature; /* 0x00 */
- U8 Reserved1; /* 0x01 */
- U8 MsgLength; /* 0x02 */
- U8 Function; /* 0x03 */
- U16 Reserved2; /* 0x04 */
- U8 Reserved3; /* 0x06 */
- U8 MsgFlags; /* 0x07 */
- U8 VP_ID; /* 0x08 */
- U8 VF_ID; /* 0x09 */
- U16 Reserved4; /* 0x0A */
- U16 Reserved5; /* 0x0C */
- U16 IOCStatus; /* 0x0E */
- U32 IOCLogInfo; /* 0x10 */
-} MPI2_PWR_MGMT_CONTROL_REPLY, MPI2_POINTER PTR_MPI2_PWR_MGMT_CONTROL_REPLY,
- Mpi2PwrMgmtControlReply_t, MPI2_POINTER pMpi2PwrMgmtControlReply_t;
-
-
-#endif
-
deleted file mode 100644
@@ -1,366 +0,0 @@
-/*
- * Copyright (c) 2000-2014 LSI Corporation.
- *
- *
- * Name: mpi2_raid.h
- * Title: MPI Integrated RAID messages and structures
- * Creation Date: April 26, 2007
- *
- * mpi2_raid.h Version: 02.00.10
- *
- * Version History
- * ---------------
- *
- * Date Version Description
- * -------- -------- ------------------------------------------------------
- * 04-30-07 02.00.00 Corresponds to Fusion-MPT MPI Specification Rev A.
- * 08-31-07 02.00.01 Modifications to RAID Action request and reply,
- * including the Actions and ActionData.
- * 02-29-08 02.00.02 Added MPI2_RAID_ACTION_ADATA_DISABL_FULL_REBUILD.
- * 05-21-08 02.00.03 Added MPI2_RAID_VOL_CREATION_NUM_PHYSDISKS so that
- * the PhysDisk array in MPI2_RAID_VOLUME_CREATION_STRUCT
- * can be sized by the build environment.
- * 07-30-09 02.00.04 Added proper define for the Use Default Settings bit of
- * VolumeCreationFlags and marked the old one as obsolete.
- * 05-12-10 02.00.05 Added MPI2_RAID_VOL_FLAGS_OP_MDC define.
- * 08-24-10 02.00.06 Added MPI2_RAID_ACTION_COMPATIBILITY_CHECK along with
- * related structures and defines.
- * Added product-specific range to RAID Action values.
- * 02-06-12 02.00.08 Added MPI2_RAID_ACTION_PHYSDISK_HIDDEN.
- * 07-26-12 02.00.09 Added ElapsedSeconds field to MPI2_RAID_VOL_INDICATOR.
- * Added MPI2_RAID_VOL_FLAGS_ELAPSED_SECONDS_VALID define.
- * 04-17-13 02.00.10 Added MPI25_RAID_ACTION_ADATA_ALLOW_PI.
- * --------------------------------------------------------------------------
- */
-
-#ifndef MPI2_RAID_H
-#define MPI2_RAID_H
-
-/*****************************************************************************
-*
-* Integrated RAID Messages
-*
-*****************************************************************************/
-
-/****************************************************************************
-* RAID Action messages
-****************************************************************************/
-
-/* ActionDataWord defines for use with MPI2_RAID_ACTION_CREATE_VOLUME action */
-#define MPI25_RAID_ACTION_ADATA_ALLOW_PI (0x80000000)
-
-/* ActionDataWord defines for use with MPI2_RAID_ACTION_DELETE_VOLUME action */
-#define MPI2_RAID_ACTION_ADATA_KEEP_LBA0 (0x00000000)
-#define MPI2_RAID_ACTION_ADATA_ZERO_LBA0 (0x00000001)
-
-/* use MPI2_RAIDVOL0_SETTING_ defines from mpi2_cnfg.h for MPI2_RAID_ACTION_CHANGE_VOL_WRITE_CACHE action */
-
-/* ActionDataWord defines for use with MPI2_RAID_ACTION_DISABLE_ALL_VOLUMES action */
-#define MPI2_RAID_ACTION_ADATA_DISABL_FULL_REBUILD (0x00000001)
-
-/* ActionDataWord for MPI2_RAID_ACTION_SET_RAID_FUNCTION_RATE Action */
-typedef struct _MPI2_RAID_ACTION_RATE_DATA
-{
- U8 RateToChange; /* 0x00 */
- U8 RateOrMode; /* 0x01 */
- U16 DataScrubDuration; /* 0x02 */
-} MPI2_RAID_ACTION_RATE_DATA, MPI2_POINTER PTR_MPI2_RAID_ACTION_RATE_DATA,
- Mpi2RaidActionRateData_t, MPI2_POINTER pMpi2RaidActionRateData_t;
-
-#define MPI2_RAID_ACTION_SET_RATE_RESYNC (0x00)
-#define MPI2_RAID_ACTION_SET_RATE_DATA_SCRUB (0x01)
-#define MPI2_RAID_ACTION_SET_RATE_POWERSAVE_MODE (0x02)
-
-/* ActionDataWord for MPI2_RAID_ACTION_START_RAID_FUNCTION Action */
-typedef struct _MPI2_RAID_ACTION_START_RAID_FUNCTION
-{
- U8 RAIDFunction; /* 0x00 */
- U8 Flags; /* 0x01 */
- U16 Reserved1; /* 0x02 */
-} MPI2_RAID_ACTION_START_RAID_FUNCTION,
- MPI2_POINTER PTR_MPI2_RAID_ACTION_START_RAID_FUNCTION,
- Mpi2RaidActionStartRaidFunction_t,
- MPI2_POINTER pMpi2RaidActionStartRaidFunction_t;
-
-/* defines for the RAIDFunction field */
-#define MPI2_RAID_ACTION_START_BACKGROUND_INIT (0x00)
-#define MPI2_RAID_ACTION_START_ONLINE_CAP_EXPANSION (0x01)
-#define MPI2_RAID_ACTION_START_CONSISTENCY_CHECK (0x02)
-
-/* defines for the Flags field */
-#define MPI2_RAID_ACTION_START_NEW (0x00)
-#define MPI2_RAID_ACTION_START_RESUME (0x01)
-
-/* ActionDataWord for MPI2_RAID_ACTION_STOP_RAID_FUNCTION Action */
-typedef struct _MPI2_RAID_ACTION_STOP_RAID_FUNCTION
-{
- U8 RAIDFunction; /* 0x00 */
- U8 Flags; /* 0x01 */
- U16 Reserved1; /* 0x02 */
-} MPI2_RAID_ACTION_STOP_RAID_FUNCTION,
- MPI2_POINTER PTR_MPI2_RAID_ACTION_STOP_RAID_FUNCTION,
- Mpi2RaidActionStopRaidFunction_t,
- MPI2_POINTER pMpi2RaidActionStopRaidFunction_t;
-
-/* defines for the RAIDFunction field */
-#define MPI2_RAID_ACTION_STOP_BACKGROUND_INIT (0x00)
-#define MPI2_RAID_ACTION_STOP_ONLINE_CAP_EXPANSION (0x01)
-#define MPI2_RAID_ACTION_STOP_CONSISTENCY_CHECK (0x02)
-
-/* defines for the Flags field */
-#define MPI2_RAID_ACTION_STOP_ABORT (0x00)
-#define MPI2_RAID_ACTION_STOP_PAUSE (0x01)
-
-/* ActionDataWord for MPI2_RAID_ACTION_CREATE_HOT_SPARE Action */
-typedef struct _MPI2_RAID_ACTION_HOT_SPARE
-{
- U8 HotSparePool; /* 0x00 */
- U8 Reserved1; /* 0x01 */
- U16 DevHandle; /* 0x02 */
-} MPI2_RAID_ACTION_HOT_SPARE, MPI2_POINTER PTR_MPI2_RAID_ACTION_HOT_SPARE,
- Mpi2RaidActionHotSpare_t, MPI2_POINTER pMpi2RaidActionHotSpare_t;
-
-/* ActionDataWord for MPI2_RAID_ACTION_DEVICE_FW_UPDATE_MODE Action */
-typedef struct _MPI2_RAID_ACTION_FW_UPDATE_MODE
-{
- U8 Flags; /* 0x00 */
- U8 DeviceFirmwareUpdateModeTimeout; /* 0x01 */
- U16 Reserved1; /* 0x02 */
-} MPI2_RAID_ACTION_FW_UPDATE_MODE,
- MPI2_POINTER PTR_MPI2_RAID_ACTION_FW_UPDATE_MODE,
- Mpi2RaidActionFwUpdateMode_t, MPI2_POINTER pMpi2RaidActionFwUpdateMode_t;
-
-/* ActionDataWord defines for use with MPI2_RAID_ACTION_DEVICE_FW_UPDATE_MODE action */
-#define MPI2_RAID_ACTION_ADATA_DISABLE_FW_UPDATE (0x00)
-#define MPI2_RAID_ACTION_ADATA_ENABLE_FW_UPDATE (0x01)
-
-typedef union _MPI2_RAID_ACTION_DATA
-{
- U32 Word;
- MPI2_RAID_ACTION_RATE_DATA Rates;
- MPI2_RAID_ACTION_START_RAID_FUNCTION StartRaidFunction;
- MPI2_RAID_ACTION_STOP_RAID_FUNCTION StopRaidFunction;
- MPI2_RAID_ACTION_HOT_SPARE HotSpare;
- MPI2_RAID_ACTION_FW_UPDATE_MODE FwUpdateMode;
-} MPI2_RAID_ACTION_DATA, MPI2_POINTER PTR_MPI2_RAID_ACTION_DATA,
- Mpi2RaidActionData_t, MPI2_POINTER pMpi2RaidActionData_t;
-
-
-/* RAID Action Request Message */
-typedef struct _MPI2_RAID_ACTION_REQUEST
-{
- U8 Action; /* 0x00 */
- U8 Reserved1; /* 0x01 */
- U8 ChainOffset; /* 0x02 */
- U8 Function; /* 0x03 */
- U16 VolDevHandle; /* 0x04 */
- U8 PhysDiskNum; /* 0x06 */
- U8 MsgFlags; /* 0x07 */
- U8 VP_ID; /* 0x08 */
- U8 VF_ID; /* 0x09 */
- U16 Reserved2; /* 0x0A */
- U32 Reserved3; /* 0x0C */
- MPI2_RAID_ACTION_DATA ActionDataWord; /* 0x10 */
- MPI2_SGE_SIMPLE_UNION ActionDataSGE; /* 0x14 */
-} MPI2_RAID_ACTION_REQUEST, MPI2_POINTER PTR_MPI2_RAID_ACTION_REQUEST,
- Mpi2RaidActionRequest_t, MPI2_POINTER pMpi2RaidActionRequest_t;
-
-/* RAID Action request Action values */
-
-#define MPI2_RAID_ACTION_INDICATOR_STRUCT (0x01)
-#define MPI2_RAID_ACTION_CREATE_VOLUME (0x02)
-#define MPI2_RAID_ACTION_DELETE_VOLUME (0x03)
-#define MPI2_RAID_ACTION_DISABLE_ALL_VOLUMES (0x04)
-#define MPI2_RAID_ACTION_ENABLE_ALL_VOLUMES (0x05)
-#define MPI2_RAID_ACTION_PHYSDISK_OFFLINE (0x0A)
-#define MPI2_RAID_ACTION_PHYSDISK_ONLINE (0x0B)
-#define MPI2_RAID_ACTION_FAIL_PHYSDISK (0x0F)
-#define MPI2_RAID_ACTION_ACTIVATE_VOLUME (0x11)
-#define MPI2_RAID_ACTION_DEVICE_FW_UPDATE_MODE (0x15)
-#define MPI2_RAID_ACTION_CHANGE_VOL_WRITE_CACHE (0x17)
-#define MPI2_RAID_ACTION_SET_VOLUME_NAME (0x18)
-#define MPI2_RAID_ACTION_SET_RAID_FUNCTION_RATE (0x19)
-#define MPI2_RAID_ACTION_ENABLE_FAILED_VOLUME (0x1C)
-#define MPI2_RAID_ACTION_CREATE_HOT_SPARE (0x1D)
-#define MPI2_RAID_ACTION_DELETE_HOT_SPARE (0x1E)
-#define MPI2_RAID_ACTION_SYSTEM_SHUTDOWN_INITIATED (0x20)
-#define MPI2_RAID_ACTION_START_RAID_FUNCTION (0x21)
-#define MPI2_RAID_ACTION_STOP_RAID_FUNCTION (0x22)
-#define MPI2_RAID_ACTION_COMPATIBILITY_CHECK (0x23)
-#define MPI2_RAID_ACTION_PHYSDISK_HIDDEN (0x24)
-#define MPI2_RAID_ACTION_MIN_PRODUCT_SPECIFIC (0x80)
-#define MPI2_RAID_ACTION_MAX_PRODUCT_SPECIFIC (0xFF)
-
-/* RAID Volume Creation Structure */
-
-/*
- * The following define can be customized for the targeted product.
- */
-#ifndef MPI2_RAID_VOL_CREATION_NUM_PHYSDISKS
-#define MPI2_RAID_VOL_CREATION_NUM_PHYSDISKS (1)
-#endif
-
-typedef struct _MPI2_RAID_VOLUME_PHYSDISK
-{
- U8 RAIDSetNum; /* 0x00 */
- U8 PhysDiskMap; /* 0x01 */
- U16 PhysDiskDevHandle; /* 0x02 */
-} MPI2_RAID_VOLUME_PHYSDISK, MPI2_POINTER PTR_MPI2_RAID_VOLUME_PHYSDISK,
- Mpi2RaidVolumePhysDisk_t, MPI2_POINTER pMpi2RaidVolumePhysDisk_t;
-
-/* defines for the PhysDiskMap field */
-#define MPI2_RAIDACTION_PHYSDISK_PRIMARY (0x01)
-#define MPI2_RAIDACTION_PHYSDISK_SECONDARY (0x02)
-
-typedef struct _MPI2_RAID_VOLUME_CREATION_STRUCT
-{
- U8 NumPhysDisks; /* 0x00 */
- U8 VolumeType; /* 0x01 */
- U16 Reserved1; /* 0x02 */
- U32 VolumeCreationFlags; /* 0x04 */
- U32 VolumeSettings; /* 0x08 */
- U8 Reserved2; /* 0x0C */
- U8 ResyncRate; /* 0x0D */
- U16 DataScrubDuration; /* 0x0E */
- U64 VolumeMaxLBA; /* 0x10 */
- U32 StripeSize; /* 0x18 */
- U8 Name[16]; /* 0x1C */
- MPI2_RAID_VOLUME_PHYSDISK PhysDisk[MPI2_RAID_VOL_CREATION_NUM_PHYSDISKS];/* 0x2C */
-} MPI2_RAID_VOLUME_CREATION_STRUCT,
- MPI2_POINTER PTR_MPI2_RAID_VOLUME_CREATION_STRUCT,
- Mpi2RaidVolumeCreationStruct_t, MPI2_POINTER pMpi2RaidVolumeCreationStruct_t;
-
-/* use MPI2_RAID_VOL_TYPE_ defines from mpi2_cnfg.h for VolumeType */
-
-/* defines for the VolumeCreationFlags field */
-#define MPI2_RAID_VOL_CREATION_DEFAULT_SETTINGS (0x80000000)
-#define MPI2_RAID_VOL_CREATION_BACKGROUND_INIT (0x00000004)
-#define MPI2_RAID_VOL_CREATION_LOW_LEVEL_INIT (0x00000002)
-#define MPI2_RAID_VOL_CREATION_MIGRATE_DATA (0x00000001)
-/* The following is an obsolete define.
- * It must be shifted left 24 bits in order to set the proper bit.
- */
-#define MPI2_RAID_VOL_CREATION_USE_DEFAULT_SETTINGS (0x80)
-
-
-/* RAID Online Capacity Expansion Structure */
-
-typedef struct _MPI2_RAID_ONLINE_CAPACITY_EXPANSION
-{
- U32 Flags; /* 0x00 */
- U16 DevHandle0; /* 0x04 */
- U16 Reserved1; /* 0x06 */
- U16 DevHandle1; /* 0x08 */
- U16 Reserved2; /* 0x0A */
-} MPI2_RAID_ONLINE_CAPACITY_EXPANSION,
- MPI2_POINTER PTR_MPI2_RAID_ONLINE_CAPACITY_EXPANSION,
- Mpi2RaidOnlineCapacityExpansion_t,
- MPI2_POINTER pMpi2RaidOnlineCapacityExpansion_t;
-
-/* RAID Compatibility Input Structure */
-
-typedef struct _MPI2_RAID_COMPATIBILITY_INPUT_STRUCT {
- U16 SourceDevHandle; /* 0x00 */
- U16 CandidateDevHandle; /* 0x02 */
- U32 Flags; /* 0x04 */
- U32 Reserved1; /* 0x08 */
- U32 Reserved2; /* 0x0C */
-} MPI2_RAID_COMPATIBILITY_INPUT_STRUCT,
-MPI2_POINTER PTR_MPI2_RAID_COMPATIBILITY_INPUT_STRUCT,
-Mpi2RaidCompatibilityInputStruct_t,
-MPI2_POINTER pMpi2RaidCompatibilityInputStruct_t;
-
-/* defines for RAID Compatibility Structure Flags field */
-#define MPI2_RAID_COMPAT_SOURCE_IS_VOLUME_FLAG (0x00000002)
-#define MPI2_RAID_COMPAT_REPORT_SOURCE_INFO_FLAG (0x00000001)
-
-
-/* RAID Volume Indicator Structure */
-
-typedef struct _MPI2_RAID_VOL_INDICATOR
-{
- U64 TotalBlocks; /* 0x00 */
- U64 BlocksRemaining; /* 0x08 */
- U32 Flags; /* 0x10 */
- U32 ElapsedSeconds; /* 0x14 */
-} MPI2_RAID_VOL_INDICATOR, MPI2_POINTER PTR_MPI2_RAID_VOL_INDICATOR,
- Mpi2RaidVolIndicator_t, MPI2_POINTER pMpi2RaidVolIndicator_t;
-
-/* defines for RAID Volume Indicator Flags field */
-#define MPI2_RAID_VOL_FLAGS_ELAPSED_SECONDS_VALID (0x80000000)
-
-#define MPI2_RAID_VOL_FLAGS_OP_MASK (0x0000000F)
-#define MPI2_RAID_VOL_FLAGS_OP_BACKGROUND_INIT (0x00000000)
-#define MPI2_RAID_VOL_FLAGS_OP_ONLINE_CAP_EXPANSION (0x00000001)
-#define MPI2_RAID_VOL_FLAGS_OP_CONSISTENCY_CHECK (0x00000002)
-#define MPI2_RAID_VOL_FLAGS_OP_RESYNC (0x00000003)
-#define MPI2_RAID_VOL_FLAGS_OP_MDC (0x00000004)
-
-/* RAID Compatibility Result Structure */
-
-typedef struct _MPI2_RAID_COMPATIBILITY_RESULT_STRUCT {
- U8 State; /* 0x00 */
- U8 Reserved1; /* 0x01 */
- U16 Reserved2; /* 0x02 */
- U32 GenericAttributes; /* 0x04 */
- U32 OEMSpecificAttributes; /* 0x08 */
- U32 Reserved3; /* 0x0C */
- U32 Reserved4; /* 0x10 */
-} MPI2_RAID_COMPATIBILITY_RESULT_STRUCT,
-MPI2_POINTER PTR_MPI2_RAID_COMPATIBILITY_RESULT_STRUCT,
-Mpi2RaidCompatibilityResultStruct_t,
-MPI2_POINTER pMpi2RaidCompatibilityResultStruct_t;
-
-/* defines for RAID Compatibility Result Structure State field */
-#define MPI2_RAID_COMPAT_STATE_COMPATIBLE (0x00)
-#define MPI2_RAID_COMPAT_STATE_NOT_COMPATIBLE (0x01)
-
-/* defines for RAID Compatibility Result Structure GenericAttributes field */
-#define MPI2_RAID_COMPAT_GENATTRIB_4K_SECTOR (0x00000010)
-
-#define MPI2_RAID_COMPAT_GENATTRIB_MEDIA_MASK (0x0000000C)
-#define MPI2_RAID_COMPAT_GENATTRIB_SOLID_STATE_DRIVE (0x00000008)
-#define MPI2_RAID_COMPAT_GENATTRIB_HARD_DISK_DRIVE (0x00000004)
-
-#define MPI2_RAID_COMPAT_GENATTRIB_PROTOCOL_MASK (0x00000003)
-#define MPI2_RAID_COMPAT_GENATTRIB_SAS_PROTOCOL (0x00000002)
-#define MPI2_RAID_COMPAT_GENATTRIB_SATA_PROTOCOL (0x00000001)
-
-/* RAID Action Reply ActionData union */
-typedef union _MPI2_RAID_ACTION_REPLY_DATA
-{
- U32 Word[6];
- MPI2_RAID_VOL_INDICATOR RaidVolumeIndicator;
- U16 VolDevHandle;
- U8 VolumeState;
- U8 PhysDiskNum;
- MPI2_RAID_COMPATIBILITY_RESULT_STRUCT RaidCompatibilityResult;
-} MPI2_RAID_ACTION_REPLY_DATA, MPI2_POINTER PTR_MPI2_RAID_ACTION_REPLY_DATA,
- Mpi2RaidActionReplyData_t, MPI2_POINTER pMpi2RaidActionReplyData_t;
-
-/* use MPI2_RAIDVOL0_SETTING_ defines from mpi2_cnfg.h for MPI2_RAID_ACTION_CHANGE_VOL_WRITE_CACHE action */
-
-
-/* RAID Action Reply Message */
-typedef struct _MPI2_RAID_ACTION_REPLY
-{
- U8 Action; /* 0x00 */
- U8 Reserved1; /* 0x01 */
- U8 MsgLength; /* 0x02 */
- U8 Function; /* 0x03 */
- U16 VolDevHandle; /* 0x04 */
- U8 PhysDiskNum; /* 0x06 */
- U8 MsgFlags; /* 0x07 */
- U8 VP_ID; /* 0x08 */
- U8 VF_ID; /* 0x09 */
- U16 Reserved2; /* 0x0A */
- U16 Reserved3; /* 0x0C */
- U16 IOCStatus; /* 0x0E */
- U32 IOCLogInfo; /* 0x10 */
- MPI2_RAID_ACTION_REPLY_DATA ActionData; /* 0x14 */
-} MPI2_RAID_ACTION_REPLY, MPI2_POINTER PTR_MPI2_RAID_ACTION_REPLY,
- Mpi2RaidActionReply_t, MPI2_POINTER pMpi2RaidActionReply_t;
-
-
-#endif
-
deleted file mode 100644
@@ -1,288 +0,0 @@
-/*
- * Copyright (c) 2000-2014 LSI Corporation.
- *
- *
- * Name: mpi2_sas.h
- * Title: MPI Serial Attached SCSI structures and definitions
- * Creation Date: February 9, 2007
- *
- * mpi2_sas.h Version: 02.00.05
- *
- * Version History
- * ---------------
- *
- * Date Version Description
- * -------- -------- ------------------------------------------------------
- * 04-30-07 02.00.00 Corresponds to Fusion-MPT MPI Specification Rev A.
- * 06-26-07 02.00.01 Added Clear All Persistent Operation to SAS IO Unit
- * Control Request.
- * 10-02-08 02.00.02 Added Set IOC Parameter Operation to SAS IO Unit Control
- * Request.
- * 10-28-09 02.00.03 Changed the type of SGL in MPI2_SATA_PASSTHROUGH_REQUEST
- * to MPI2_SGE_IO_UNION since it supports chained SGLs.
- * 05-12-10 02.00.04 Modified some comments.
- * 08-11-10 02.00.05 Added NCQ operations to SAS IO Unit Control.
- * --------------------------------------------------------------------------
- */
-
-#ifndef MPI2_SAS_H
-#define MPI2_SAS_H
-
-/*
- * Values for SASStatus.
- */
-#define MPI2_SASSTATUS_SUCCESS (0x00)
-#define MPI2_SASSTATUS_UNKNOWN_ERROR (0x01)
-#define MPI2_SASSTATUS_INVALID_FRAME (0x02)
-#define MPI2_SASSTATUS_UTC_BAD_DEST (0x03)
-#define MPI2_SASSTATUS_UTC_BREAK_RECEIVED (0x04)
-#define MPI2_SASSTATUS_UTC_CONNECT_RATE_NOT_SUPPORTED (0x05)
-#define MPI2_SASSTATUS_UTC_PORT_LAYER_REQUEST (0x06)
-#define MPI2_SASSTATUS_UTC_PROTOCOL_NOT_SUPPORTED (0x07)
-#define MPI2_SASSTATUS_UTC_STP_RESOURCES_BUSY (0x08)
-#define MPI2_SASSTATUS_UTC_WRONG_DESTINATION (0x09)
-#define MPI2_SASSTATUS_SHORT_INFORMATION_UNIT (0x0A)
-#define MPI2_SASSTATUS_LONG_INFORMATION_UNIT (0x0B)
-#define MPI2_SASSTATUS_XFER_RDY_INCORRECT_WRITE_DATA (0x0C)
-#define MPI2_SASSTATUS_XFER_RDY_REQUEST_OFFSET_ERROR (0x0D)
-#define MPI2_SASSTATUS_XFER_RDY_NOT_EXPECTED (0x0E)
-#define MPI2_SASSTATUS_DATA_INCORRECT_DATA_LENGTH (0x0F)
-#define MPI2_SASSTATUS_DATA_TOO_MUCH_READ_DATA (0x10)
-#define MPI2_SASSTATUS_DATA_OFFSET_ERROR (0x11)
-#define MPI2_SASSTATUS_SDSF_NAK_RECEIVED (0x12)
-#define MPI2_SASSTATUS_SDSF_CONNECTION_FAILED (0x13)
-#define MPI2_SASSTATUS_INITIATOR_RESPONSE_TIMEOUT (0x14)
-
-
-/*
- * Values for the SAS DeviceInfo field used in SAS Device Status Change Event
- * data and SAS Configuration pages.
- */
-#define MPI2_SAS_DEVICE_INFO_SEP (0x00004000)
-#define MPI2_SAS_DEVICE_INFO_ATAPI_DEVICE (0x00002000)
-#define MPI2_SAS_DEVICE_INFO_LSI_DEVICE (0x00001000)
-#define MPI2_SAS_DEVICE_INFO_DIRECT_ATTACH (0x00000800)
-#define MPI2_SAS_DEVICE_INFO_SSP_TARGET (0x00000400)
-#define MPI2_SAS_DEVICE_INFO_STP_TARGET (0x00000200)
-#define MPI2_SAS_DEVICE_INFO_SMP_TARGET (0x00000100)
-#define MPI2_SAS_DEVICE_INFO_SATA_DEVICE (0x00000080)
-#define MPI2_SAS_DEVICE_INFO_SSP_INITIATOR (0x00000040)
-#define MPI2_SAS_DEVICE_INFO_STP_INITIATOR (0x00000020)
-#define MPI2_SAS_DEVICE_INFO_SMP_INITIATOR (0x00000010)
-#define MPI2_SAS_DEVICE_INFO_SATA_HOST (0x00000008)
-
-#define MPI2_SAS_DEVICE_INFO_MASK_DEVICE_TYPE (0x00000007)
-#define MPI2_SAS_DEVICE_INFO_NO_DEVICE (0x00000000)
-#define MPI2_SAS_DEVICE_INFO_END_DEVICE (0x00000001)
-#define MPI2_SAS_DEVICE_INFO_EDGE_EXPANDER (0x00000002)
-#define MPI2_SAS_DEVICE_INFO_FANOUT_EXPANDER (0x00000003)
-
-
-/*****************************************************************************
-*
-* SAS Messages
-*
-*****************************************************************************/
-
-/****************************************************************************
-* SMP Passthrough messages
-****************************************************************************/
-
-/* SMP Passthrough Request Message */
-typedef struct _MPI2_SMP_PASSTHROUGH_REQUEST
-{
- U8 PassthroughFlags; /* 0x00 */
- U8 PhysicalPort; /* 0x01 */
- U8 ChainOffset; /* 0x02 */
- U8 Function; /* 0x03 */
- U16 RequestDataLength; /* 0x04 */
- U8 SGLFlags; /* 0x06 */
- U8 MsgFlags; /* 0x07 */
- U8 VP_ID; /* 0x08 */
- U8 VF_ID; /* 0x09 */
- U16 Reserved1; /* 0x0A */
- U32 Reserved2; /* 0x0C */
- U64 SASAddress; /* 0x10 */
- U32 Reserved3; /* 0x18 */
- U32 Reserved4; /* 0x1C */
- MPI2_SIMPLE_SGE_UNION SGL; /* 0x20 */
-} MPI2_SMP_PASSTHROUGH_REQUEST, MPI2_POINTER PTR_MPI2_SMP_PASSTHROUGH_REQUEST,
- Mpi2SmpPassthroughRequest_t, MPI2_POINTER pMpi2SmpPassthroughRequest_t;
-
-/* values for PassthroughFlags field */
-#define MPI2_SMP_PT_REQ_PT_FLAGS_IMMEDIATE (0x80)
-
-/* use MPI2_SGLFLAGS_ defines from mpi2.h for the SGLFlags field */
-
-
-/* SMP Passthrough Reply Message */
-typedef struct _MPI2_SMP_PASSTHROUGH_REPLY
-{
- U8 PassthroughFlags; /* 0x00 */
- U8 PhysicalPort; /* 0x01 */
- U8 MsgLength; /* 0x02 */
- U8 Function; /* 0x03 */
- U16 ResponseDataLength; /* 0x04 */
- U8 SGLFlags; /* 0x06 */
- U8 MsgFlags; /* 0x07 */
- U8 VP_ID; /* 0x08 */
- U8 VF_ID; /* 0x09 */
- U16 Reserved1; /* 0x0A */
- U8 Reserved2; /* 0x0C */
- U8 SASStatus; /* 0x0D */
- U16 IOCStatus; /* 0x0E */
- U32 IOCLogInfo; /* 0x10 */
- U32 Reserved3; /* 0x14 */
- U8 ResponseData[4]; /* 0x18 */
-} MPI2_SMP_PASSTHROUGH_REPLY, MPI2_POINTER PTR_MPI2_SMP_PASSTHROUGH_REPLY,
- Mpi2SmpPassthroughReply_t, MPI2_POINTER pMpi2SmpPassthroughReply_t;
-
-/* values for PassthroughFlags field */
-#define MPI2_SMP_PT_REPLY_PT_FLAGS_IMMEDIATE (0x80)
-
-/* values for SASStatus field are at the top of this file */
-
-
-/****************************************************************************
-* SATA Passthrough messages
-****************************************************************************/
-
-/* SATA Passthrough Request Message */
-typedef struct _MPI2_SATA_PASSTHROUGH_REQUEST
-{
- U16 DevHandle; /* 0x00 */
- U8 ChainOffset; /* 0x02 */
- U8 Function; /* 0x03 */
- U16 PassthroughFlags; /* 0x04 */
- U8 SGLFlags; /* 0x06 */
- U8 MsgFlags; /* 0x07 */
- U8 VP_ID; /* 0x08 */
- U8 VF_ID; /* 0x09 */
- U16 Reserved1; /* 0x0A */
- U32 Reserved2; /* 0x0C */
- U32 Reserved3; /* 0x10 */
- U32 Reserved4; /* 0x14 */
- U32 DataLength; /* 0x18 */
- U8 CommandFIS[20]; /* 0x1C */
- MPI2_SGE_IO_UNION SGL; /* 0x30 */
-} MPI2_SATA_PASSTHROUGH_REQUEST, MPI2_POINTER PTR_MPI2_SATA_PASSTHROUGH_REQUEST,
- Mpi2SataPassthroughRequest_t, MPI2_POINTER pMpi2SataPassthroughRequest_t;
-
-/* values for PassthroughFlags field */
-#define MPI2_SATA_PT_REQ_PT_FLAGS_EXECUTE_DIAG (0x0100)
-#define MPI2_SATA_PT_REQ_PT_FLAGS_DMA (0x0020)
-#define MPI2_SATA_PT_REQ_PT_FLAGS_PIO (0x0010)
-#define MPI2_SATA_PT_REQ_PT_FLAGS_UNSPECIFIED_VU (0x0004)
-#define MPI2_SATA_PT_REQ_PT_FLAGS_WRITE (0x0002)
-#define MPI2_SATA_PT_REQ_PT_FLAGS_READ (0x0001)
-
-/* use MPI2_SGLFLAGS_ defines from mpi2.h for the SGLFlags field */
-
-
-/* SATA Passthrough Reply Message */
-typedef struct _MPI2_SATA_PASSTHROUGH_REPLY
-{
- U16 DevHandle; /* 0x00 */
- U8 MsgLength; /* 0x02 */
- U8 Function; /* 0x03 */
- U16 PassthroughFlags; /* 0x04 */
- U8 SGLFlags; /* 0x06 */
- U8 MsgFlags; /* 0x07 */
- U8 VP_ID; /* 0x08 */
- U8 VF_ID; /* 0x09 */
- U16 Reserved1; /* 0x0A */
- U8 Reserved2; /* 0x0C */
- U8 SASStatus; /* 0x0D */
- U16 IOCStatus; /* 0x0E */
- U32 IOCLogInfo; /* 0x10 */
- U8 StatusFIS[20]; /* 0x14 */
- U32 StatusControlRegisters; /* 0x28 */
- U32 TransferCount; /* 0x2C */
-} MPI2_SATA_PASSTHROUGH_REPLY, MPI2_POINTER PTR_MPI2_SATA_PASSTHROUGH_REPLY,
- Mpi2SataPassthroughReply_t, MPI2_POINTER pMpi2SataPassthroughReply_t;
-
-/* values for SASStatus field are at the top of this file */
-
-
-/****************************************************************************
-* SAS IO Unit Control messages
-****************************************************************************/
-
-/* SAS IO Unit Control Request Message */
-typedef struct _MPI2_SAS_IOUNIT_CONTROL_REQUEST
-{
- U8 Operation; /* 0x00 */
- U8 Reserved1; /* 0x01 */
- U8 ChainOffset; /* 0x02 */
- U8 Function; /* 0x03 */
- U16 DevHandle; /* 0x04 */
- U8 IOCParameter; /* 0x06 */
- U8 MsgFlags; /* 0x07 */
- U8 VP_ID; /* 0x08 */
- U8 VF_ID; /* 0x09 */
- U16 Reserved3; /* 0x0A */
- U16 Reserved4; /* 0x0C */
- U8 PhyNum; /* 0x0E */
- U8 PrimFlags; /* 0x0F */
- U32 Primitive; /* 0x10 */
- U8 LookupMethod; /* 0x14 */
- U8 Reserved5; /* 0x15 */
- U16 SlotNumber; /* 0x16 */
- U64 LookupAddress; /* 0x18 */
- U32 IOCParameterValue; /* 0x20 */
- U32 Reserved7; /* 0x24 */
- U32 Reserved8; /* 0x28 */
-} MPI2_SAS_IOUNIT_CONTROL_REQUEST,
- MPI2_POINTER PTR_MPI2_SAS_IOUNIT_CONTROL_REQUEST,
- Mpi2SasIoUnitControlRequest_t, MPI2_POINTER pMpi2SasIoUnitControlRequest_t;
-
-/* values for the Operation field */
-#define MPI2_SAS_OP_CLEAR_ALL_PERSISTENT (0x02)
-#define MPI2_SAS_OP_PHY_LINK_RESET (0x06)
-#define MPI2_SAS_OP_PHY_HARD_RESET (0x07)
-#define MPI2_SAS_OP_PHY_CLEAR_ERROR_LOG (0x08)
-#define MPI2_SAS_OP_SEND_PRIMITIVE (0x0A)
-#define MPI2_SAS_OP_FORCE_FULL_DISCOVERY (0x0B)
-#define MPI2_SAS_OP_TRANSMIT_PORT_SELECT_SIGNAL (0x0C)
-#define MPI2_SAS_OP_REMOVE_DEVICE (0x0D)
-#define MPI2_SAS_OP_LOOKUP_MAPPING (0x0E)
-#define MPI2_SAS_OP_SET_IOC_PARAMETER (0x0F)
-#define MPI2_SAS_OP_DEV_ENABLE_NCQ (0x14)
-#define MPI2_SAS_OP_DEV_DISABLE_NCQ (0x15)
-#define MPI2_SAS_OP_PRODUCT_SPECIFIC_MIN (0x80)
-
-/* values for the PrimFlags field */
-#define MPI2_SAS_PRIMFLAGS_SINGLE (0x08)
-#define MPI2_SAS_PRIMFLAGS_TRIPLE (0x02)
-#define MPI2_SAS_PRIMFLAGS_REDUNDANT (0x01)
-
-/* values for the LookupMethod field */
-#define MPI2_SAS_LOOKUP_METHOD_SAS_ADDRESS (0x01)
-#define MPI2_SAS_LOOKUP_METHOD_SAS_ENCLOSURE_SLOT (0x02)
-#define MPI2_SAS_LOOKUP_METHOD_SAS_DEVICE_NAME (0x03)
-
-
-/* SAS IO Unit Control Reply Message */
-typedef struct _MPI2_SAS_IOUNIT_CONTROL_REPLY
-{
- U8 Operation; /* 0x00 */
- U8 Reserved1; /* 0x01 */
- U8 MsgLength; /* 0x02 */
- U8 Function; /* 0x03 */
- U16 DevHandle; /* 0x04 */
- U8 IOCParameter; /* 0x06 */
- U8 MsgFlags; /* 0x07 */
- U8 VP_ID; /* 0x08 */
- U8 VF_ID; /* 0x09 */
- U16 Reserved3; /* 0x0A */
- U16 Reserved4; /* 0x0C */
- U16 IOCStatus; /* 0x0E */
- U32 IOCLogInfo; /* 0x10 */
-} MPI2_SAS_IOUNIT_CONTROL_REPLY,
- MPI2_POINTER PTR_MPI2_SAS_IOUNIT_CONTROL_REPLY,
- Mpi2SasIoUnitControlReply_t, MPI2_POINTER pMpi2SasIoUnitControlReply_t;
-
-
-#endif
-
-
deleted file mode 100644
@@ -1,481 +0,0 @@
-/*
- * Copyright (c) 2000-2014 LSI Corporation.
- *
- *
- * Name: mpi2_tool.h
- * Title: MPI diagnostic tool structures and definitions
- * Creation Date: March 26, 2007
- *
- * mpi2_tool.h Version: 02.00.12
- *
- * Version History
- * ---------------
- *
- * Date Version Description
- * -------- -------- ------------------------------------------------------
- * 04-30-07 02.00.00 Corresponds to Fusion-MPT MPI Specification Rev A.
- * 12-18-07 02.00.01 Added Diagnostic Buffer Post and Diagnostic Release
- * structures and defines.
- * 02-29-08 02.00.02 Modified various names to make them 32-character unique.
- * 05-06-09 02.00.03 Added ISTWI Read Write Tool and Diagnostic CLI Tool.
- * 07-30-09 02.00.04 Added ExtendedType field to DiagnosticBufferPost request
- * and reply messages.
- * Added MPI2_DIAG_BUF_TYPE_EXTENDED.
- * Incremented MPI2_DIAG_BUF_TYPE_COUNT.
- * 05-12-10 02.00.05 Added Diagnostic Data Upload tool.
- * 08-11-10 02.00.06 Added defines that were missing for Diagnostic Buffer
- * Post Request.
- * 05-25-11 02.00.07 Added Flags field and related defines to
- * MPI2_TOOLBOX_ISTWI_READ_WRITE_REQUEST.
- * 07-26-12 02.00.10 Modified MPI2_TOOLBOX_DIAGNOSTIC_CLI_REQUEST so that
- * it uses MPI Chain SGE as well as MPI Simple SGE.
- * 08-19-13 02.00.11 Added MPI2_TOOLBOX_TEXT_DISPLAY_TOOL and related info.
- * 01-08-14 02.00.12 Added MPI2_TOOLBOX_CLEAN_BIT26_PRODUCT_SPECIFIC.
- * --------------------------------------------------------------------------
- */
-
-#ifndef MPI2_TOOL_H
-#define MPI2_TOOL_H
-
-/*****************************************************************************
-*
-* Toolbox Messages
-*
-*****************************************************************************/
-
-/* defines for the Tools */
-#define MPI2_TOOLBOX_CLEAN_TOOL (0x00)
-#define MPI2_TOOLBOX_MEMORY_MOVE_TOOL (0x01)
-#define MPI2_TOOLBOX_DIAG_DATA_UPLOAD_TOOL (0x02)
-#define MPI2_TOOLBOX_ISTWI_READ_WRITE_TOOL (0x03)
-#define MPI2_TOOLBOX_BEACON_TOOL (0x05)
-#define MPI2_TOOLBOX_DIAGNOSTIC_CLI_TOOL (0x06)
-#define MPI2_TOOLBOX_TEXT_DISPLAY_TOOL (0x07)
-
-
-/****************************************************************************
-* Toolbox reply
-****************************************************************************/
-
-typedef struct _MPI2_TOOLBOX_REPLY
-{
- U8 Tool; /* 0x00 */
- U8 Reserved1; /* 0x01 */
- U8 MsgLength; /* 0x02 */
- U8 Function; /* 0x03 */
- U16 Reserved2; /* 0x04 */
- U8 Reserved3; /* 0x06 */
- U8 MsgFlags; /* 0x07 */
- U8 VP_ID; /* 0x08 */
- U8 VF_ID; /* 0x09 */
- U16 Reserved4; /* 0x0A */
- U16 Reserved5; /* 0x0C */
- U16 IOCStatus; /* 0x0E */
- U32 IOCLogInfo; /* 0x10 */
-} MPI2_TOOLBOX_REPLY, MPI2_POINTER PTR_MPI2_TOOLBOX_REPLY,
- Mpi2ToolboxReply_t, MPI2_POINTER pMpi2ToolboxReply_t;
-
-
-/****************************************************************************
-* Toolbox Clean Tool request
-****************************************************************************/
-
-typedef struct _MPI2_TOOLBOX_CLEAN_REQUEST
-{
- U8 Tool; /* 0x00 */
- U8 Reserved1; /* 0x01 */
- U8 ChainOffset; /* 0x02 */
- U8 Function; /* 0x03 */
- U16 Reserved2; /* 0x04 */
- U8 Reserved3; /* 0x06 */
- U8 MsgFlags; /* 0x07 */
- U8 VP_ID; /* 0x08 */
- U8 VF_ID; /* 0x09 */
- U16 Reserved4; /* 0x0A */
- U32 Flags; /* 0x0C */
- } MPI2_TOOLBOX_CLEAN_REQUEST, MPI2_POINTER PTR_MPI2_TOOLBOX_CLEAN_REQUEST,
- Mpi2ToolboxCleanRequest_t, MPI2_POINTER pMpi2ToolboxCleanRequest_t;
-
-/* values for the Flags field */
-#define MPI2_TOOLBOX_CLEAN_BOOT_SERVICES (0x80000000)
-#define MPI2_TOOLBOX_CLEAN_PERSIST_MANUFACT_PAGES (0x40000000)
-#define MPI2_TOOLBOX_CLEAN_OTHER_PERSIST_PAGES (0x20000000)
-#define MPI2_TOOLBOX_CLEAN_FW_CURRENT (0x10000000)
-#define MPI2_TOOLBOX_CLEAN_FW_BACKUP (0x08000000)
-#define MPI2_TOOLBOX_CLEAN_BIT26_PRODUCT_SPECIFIC (0x04000000)
-#define MPI2_TOOLBOX_CLEAN_MEGARAID (0x02000000)
-#define MPI2_TOOLBOX_CLEAN_INITIALIZATION (0x01000000)
-#define MPI2_TOOLBOX_CLEAN_FLASH (0x00000004)
-#define MPI2_TOOLBOX_CLEAN_SEEPROM (0x00000002)
-#define MPI2_TOOLBOX_CLEAN_NVSRAM (0x00000001)
-
-
-/****************************************************************************
-* Toolbox Memory Move request
-****************************************************************************/
-
-typedef struct _MPI2_TOOLBOX_MEM_MOVE_REQUEST {
- U8 Tool; /* 0x00 */
- U8 Reserved1; /* 0x01 */
- U8 ChainOffset; /* 0x02 */
- U8 Function; /* 0x03 */
- U16 Reserved2; /* 0x04 */
- U8 Reserved3; /* 0x06 */
- U8 MsgFlags; /* 0x07 */
- U8 VP_ID; /* 0x08 */
- U8 VF_ID; /* 0x09 */
- U16 Reserved4; /* 0x0A */
- MPI2_SGE_SIMPLE_UNION SGL; /* 0x0C */
-} MPI2_TOOLBOX_MEM_MOVE_REQUEST, MPI2_POINTER PTR_MPI2_TOOLBOX_MEM_MOVE_REQUEST,
- Mpi2ToolboxMemMoveRequest_t, MPI2_POINTER pMpi2ToolboxMemMoveRequest_t;
-
-
-/****************************************************************************
-* Toolbox Diagnostic Data Upload request
-****************************************************************************/
-
-typedef struct _MPI2_TOOLBOX_DIAG_DATA_UPLOAD_REQUEST {
- U8 Tool; /* 0x00 */
- U8 Reserved1; /* 0x01 */
- U8 ChainOffset; /* 0x02 */
- U8 Function; /* 0x03 */
- U16 Reserved2; /* 0x04 */
- U8 Reserved3; /* 0x06 */
- U8 MsgFlags; /* 0x07 */
- U8 VP_ID; /* 0x08 */
- U8 VF_ID; /* 0x09 */
- U16 Reserved4; /* 0x0A */
- U8 SGLFlags; /* 0x0C */
- U8 Reserved5; /* 0x0D */
- U16 Reserved6; /* 0x0E */
- U32 Flags; /* 0x10 */
- U32 DataLength; /* 0x14 */
- MPI2_SGE_SIMPLE_UNION SGL; /* 0x18 */
-} MPI2_TOOLBOX_DIAG_DATA_UPLOAD_REQUEST,
-MPI2_POINTER PTR_MPI2_TOOLBOX_DIAG_DATA_UPLOAD_REQUEST,
-Mpi2ToolboxDiagDataUploadRequest_t,
-MPI2_POINTER pMpi2ToolboxDiagDataUploadRequest_t;
-
-/* use MPI2_SGLFLAGS_ defines from mpi2.h for the SGLFlags field */
-
-
-typedef struct _MPI2_DIAG_DATA_UPLOAD_HEADER {
- U32 DiagDataLength; /* 00h */
- U8 FormatCode; /* 04h */
- U8 Reserved1; /* 05h */
- U16 Reserved2; /* 06h */
-} MPI2_DIAG_DATA_UPLOAD_HEADER, MPI2_POINTER PTR_MPI2_DIAG_DATA_UPLOAD_HEADER,
-Mpi2DiagDataUploadHeader_t, MPI2_POINTER pMpi2DiagDataUploadHeader_t;
-
-
-/****************************************************************************
-* Toolbox ISTWI Read Write Tool
-****************************************************************************/
-
-/* Toolbox ISTWI Read Write Tool request message */
-typedef struct _MPI2_TOOLBOX_ISTWI_READ_WRITE_REQUEST {
- U8 Tool; /* 0x00 */
- U8 Reserved1; /* 0x01 */
- U8 ChainOffset; /* 0x02 */
- U8 Function; /* 0x03 */
- U16 Reserved2; /* 0x04 */
- U8 Reserved3; /* 0x06 */
- U8 MsgFlags; /* 0x07 */
- U8 VP_ID; /* 0x08 */
- U8 VF_ID; /* 0x09 */
- U16 Reserved4; /* 0x0A */
- U32 Reserved5; /* 0x0C */
- U32 Reserved6; /* 0x10 */
- U8 DevIndex; /* 0x14 */
- U8 Action; /* 0x15 */
- U8 SGLFlags; /* 0x16 */
- U8 Flags; /* 0x17 */
- U16 TxDataLength; /* 0x18 */
- U16 RxDataLength; /* 0x1A */
- U32 Reserved8; /* 0x1C */
- U32 Reserved9; /* 0x20 */
- U32 Reserved10; /* 0x24 */
- U32 Reserved11; /* 0x28 */
- U32 Reserved12; /* 0x2C */
- MPI2_SGE_SIMPLE_UNION SGL; /* 0x30 */
-} MPI2_TOOLBOX_ISTWI_READ_WRITE_REQUEST,
- MPI2_POINTER PTR_MPI2_TOOLBOX_ISTWI_READ_WRITE_REQUEST,
- Mpi2ToolboxIstwiReadWriteRequest_t,
- MPI2_POINTER pMpi2ToolboxIstwiReadWriteRequest_t;
-
-/* values for the Action field */
-#define MPI2_TOOL_ISTWI_ACTION_READ_DATA (0x01)
-#define MPI2_TOOL_ISTWI_ACTION_WRITE_DATA (0x02)
-#define MPI2_TOOL_ISTWI_ACTION_SEQUENCE (0x03)
-#define MPI2_TOOL_ISTWI_ACTION_RESERVE_BUS (0x10)
-#define MPI2_TOOL_ISTWI_ACTION_RELEASE_BUS (0x11)
-#define MPI2_TOOL_ISTWI_ACTION_RESET (0x12)
-
-/* use MPI2_SGLFLAGS_ defines from mpi2.h for the SGLFlags field */
-
-/* values for the Flags field */
-#define MPI2_TOOL_ISTWI_FLAG_AUTO_RESERVE_RELEASE (0x80)
-#define MPI2_TOOL_ISTWI_FLAG_PAGE_ADDR_MASK (0x07)
-
-/* Toolbox ISTWI Read Write Tool reply message */
-typedef struct _MPI2_TOOLBOX_ISTWI_REPLY {
- U8 Tool; /* 0x00 */
- U8 Reserved1; /* 0x01 */
- U8 MsgLength; /* 0x02 */
- U8 Function; /* 0x03 */
- U16 Reserved2; /* 0x04 */
- U8 Reserved3; /* 0x06 */
- U8 MsgFlags; /* 0x07 */
- U8 VP_ID; /* 0x08 */
- U8 VF_ID; /* 0x09 */
- U16 Reserved4; /* 0x0A */
- U16 Reserved5; /* 0x0C */
- U16 IOCStatus; /* 0x0E */
- U32 IOCLogInfo; /* 0x10 */
- U8 DevIndex; /* 0x14 */
- U8 Action; /* 0x15 */
- U8 IstwiStatus; /* 0x16 */
- U8 Reserved6; /* 0x17 */
- U16 TxDataCount; /* 0x18 */
- U16 RxDataCount; /* 0x1A */
-} MPI2_TOOLBOX_ISTWI_REPLY, MPI2_POINTER PTR_MPI2_TOOLBOX_ISTWI_REPLY,
- Mpi2ToolboxIstwiReply_t, MPI2_POINTER pMpi2ToolboxIstwiReply_t;
-
-
-/****************************************************************************
-* Toolbox Beacon Tool request
-****************************************************************************/
-
-typedef struct _MPI2_TOOLBOX_BEACON_REQUEST
-{
- U8 Tool; /* 0x00 */
- U8 Reserved1; /* 0x01 */
- U8 ChainOffset; /* 0x02 */
- U8 Function; /* 0x03 */
- U16 Reserved2; /* 0x04 */
- U8 Reserved3; /* 0x06 */
- U8 MsgFlags; /* 0x07 */
- U8 VP_ID; /* 0x08 */
- U8 VF_ID; /* 0x09 */
- U16 Reserved4; /* 0x0A */
- U8 Reserved5; /* 0x0C */
- U8 PhysicalPort; /* 0x0D */
- U8 Reserved6; /* 0x0E */
- U8 Flags; /* 0x0F */
-} MPI2_TOOLBOX_BEACON_REQUEST, MPI2_POINTER PTR_MPI2_TOOLBOX_BEACON_REQUEST,
- Mpi2ToolboxBeaconRequest_t, MPI2_POINTER pMpi2ToolboxBeaconRequest_t;
-
-/* values for the Flags field */
-#define MPI2_TOOLBOX_FLAGS_BEACONMODE_OFF (0x00)
-#define MPI2_TOOLBOX_FLAGS_BEACONMODE_ON (0x01)
-
-
-/****************************************************************************
-* Toolbox Diagnostic CLI Tool
-****************************************************************************/
-
-#define MPI2_TOOLBOX_DIAG_CLI_CMD_LENGTH (0x5C)
-
-/* MPI v2.0 Toolbox Diagnostic CLI Tool request message */
-typedef struct _MPI2_TOOLBOX_DIAGNOSTIC_CLI_REQUEST {
- U8 Tool; /* 0x00 */
- U8 Reserved1; /* 0x01 */
- U8 ChainOffset; /* 0x02 */
- U8 Function; /* 0x03 */
- U16 Reserved2; /* 0x04 */
- U8 Reserved3; /* 0x06 */
- U8 MsgFlags; /* 0x07 */
- U8 VP_ID; /* 0x08 */
- U8 VF_ID; /* 0x09 */
- U16 Reserved4; /* 0x0A */
- U8 SGLFlags; /* 0x0C */
- U8 Reserved5; /* 0x0D */
- U16 Reserved6; /* 0x0E */
- U32 DataLength; /* 0x10 */
- U8 DiagnosticCliCommand
- [MPI2_TOOLBOX_DIAG_CLI_CMD_LENGTH]; /* 0x14 */
- MPI2_MPI_SGE_IO_UNION SGL; /* 0x70 */
-} MPI2_TOOLBOX_DIAGNOSTIC_CLI_REQUEST,
- MPI2_POINTER PTR_MPI2_TOOLBOX_DIAGNOSTIC_CLI_REQUEST,
- Mpi2ToolboxDiagnosticCliRequest_t,
- MPI2_POINTER pMpi2ToolboxDiagnosticCliRequest_t;
-
-/* use MPI2_SGLFLAGS_ defines from mpi2.h for the SGLFlags field */
-
-
-/* Toolbox Diagnostic CLI Tool reply message */
-typedef struct _MPI2_TOOLBOX_DIAGNOSTIC_CLI_REPLY {
- U8 Tool; /* 0x00 */
- U8 Reserved1; /* 0x01 */
- U8 MsgLength; /* 0x02 */
- U8 Function; /* 0x03 */
- U16 Reserved2; /* 0x04 */
- U8 Reserved3; /* 0x06 */
- U8 MsgFlags; /* 0x07 */
- U8 VP_ID; /* 0x08 */
- U8 VF_ID; /* 0x09 */
- U16 Reserved4; /* 0x0A */
- U16 Reserved5; /* 0x0C */
- U16 IOCStatus; /* 0x0E */
- U32 IOCLogInfo; /* 0x10 */
- U32 ReturnedDataLength; /* 0x14 */
-} MPI2_TOOLBOX_DIAGNOSTIC_CLI_REPLY,
- MPI2_POINTER PTR_MPI2_TOOLBOX_DIAG_CLI_REPLY,
- Mpi2ToolboxDiagnosticCliReply_t,
- MPI2_POINTER pMpi2ToolboxDiagnosticCliReply_t;
-
-
-/****************************************************************************
-* Toolbox Console Text Display Tool
-****************************************************************************/
-
-/* Toolbox Console Text Display Tool request message */
-typedef struct _MPI2_TOOLBOX_TEXT_DISPLAY_REQUEST {
- U8 Tool; /* 0x00 */
- U8 Reserved1; /* 0x01 */
- U8 ChainOffset; /* 0x02 */
- U8 Function; /* 0x03 */
- U16 Reserved2; /* 0x04 */
- U8 Reserved3; /* 0x06 */
- U8 MsgFlags; /* 0x07 */
- U8 VP_ID; /* 0x08 */
- U8 VF_ID; /* 0x09 */
- U16 Reserved4; /* 0x0A */
- U8 Console; /* 0x0C */
- U8 Flags; /* 0x0D */
- U16 Reserved6; /* 0x0E */
- U8 TextToDisplay[4]; /* 0x10 */
-} MPI2_TOOLBOX_TEXT_DISPLAY_REQUEST,
-MPI2_POINTER PTR_MPI2_TOOLBOX_TEXT_DISPLAY_REQUEST,
-Mpi2ToolboxTextDisplayRequest_t,
-MPI2_POINTER pMpi2ToolboxTextDisplayRequest_t;
-
-/* defines for the Console field */
-#define MPI2_TOOLBOX_CONSOLE_TYPE_MASK (0xF0)
-#define MPI2_TOOLBOX_CONSOLE_TYPE_DEFAULT (0x00)
-#define MPI2_TOOLBOX_CONSOLE_TYPE_UART (0x10)
-#define MPI2_TOOLBOX_CONSOLE_TYPE_ETHERNET (0x20)
-
-#define MPI2_TOOLBOX_CONSOLE_NUMBER_MASK (0x0F)
-
-/* defines for the Flags field */
-#define MPI2_TOOLBOX_CONSOLE_FLAG_TIMESTAMP (0x01)
-
-
-
-/*****************************************************************************
-*
-* Diagnostic Buffer Messages
-*
-*****************************************************************************/
-
-
-/****************************************************************************
-* Diagnostic Buffer Post request
-****************************************************************************/
-
-typedef struct _MPI2_DIAG_BUFFER_POST_REQUEST
-{
- U8 ExtendedType; /* 0x00 */
- U8 BufferType; /* 0x01 */
- U8 ChainOffset; /* 0x02 */
- U8 Function; /* 0x03 */
- U16 Reserved2; /* 0x04 */
- U8 Reserved3; /* 0x06 */
- U8 MsgFlags; /* 0x07 */
- U8 VP_ID; /* 0x08 */
- U8 VF_ID; /* 0x09 */
- U16 Reserved4; /* 0x0A */
- U64 BufferAddress; /* 0x0C */
- U32 BufferLength; /* 0x14 */
- U32 Reserved5; /* 0x18 */
- U32 Reserved6; /* 0x1C */
- U32 Flags; /* 0x20 */
- U32 ProductSpecific[23]; /* 0x24 */
-} MPI2_DIAG_BUFFER_POST_REQUEST, MPI2_POINTER PTR_MPI2_DIAG_BUFFER_POST_REQUEST,
- Mpi2DiagBufferPostRequest_t, MPI2_POINTER pMpi2DiagBufferPostRequest_t;
-
-/* values for the ExtendedType field */
-#define MPI2_DIAG_EXTENDED_TYPE_UTILIZATION (0x02)
-
-/* values for the BufferType field */
-#define MPI2_DIAG_BUF_TYPE_TRACE (0x00)
-#define MPI2_DIAG_BUF_TYPE_SNAPSHOT (0x01)
-#define MPI2_DIAG_BUF_TYPE_EXTENDED (0x02)
-/* count of the number of buffer types */
-#define MPI2_DIAG_BUF_TYPE_COUNT (0x03)
-
-/* values for the Flags field */
-#define MPI2_DIAG_BUF_FLAG_RELEASE_ON_FULL (0x00000002)
-#define MPI2_DIAG_BUF_FLAG_IMMEDIATE_RELEASE (0x00000001)
-
-
-/****************************************************************************
-* Diagnostic Buffer Post reply
-****************************************************************************/
-
-typedef struct _MPI2_DIAG_BUFFER_POST_REPLY
-{
- U8 ExtendedType; /* 0x00 */
- U8 BufferType; /* 0x01 */
- U8 MsgLength; /* 0x02 */
- U8 Function; /* 0x03 */
- U16 Reserved2; /* 0x04 */
- U8 Reserved3; /* 0x06 */
- U8 MsgFlags; /* 0x07 */
- U8 VP_ID; /* 0x08 */
- U8 VF_ID; /* 0x09 */
- U16 Reserved4; /* 0x0A */
- U16 Reserved5; /* 0x0C */
- U16 IOCStatus; /* 0x0E */
- U32 IOCLogInfo; /* 0x10 */
- U32 TransferLength; /* 0x14 */
-} MPI2_DIAG_BUFFER_POST_REPLY, MPI2_POINTER PTR_MPI2_DIAG_BUFFER_POST_REPLY,
- Mpi2DiagBufferPostReply_t, MPI2_POINTER pMpi2DiagBufferPostReply_t;
-
-
-/****************************************************************************
-* Diagnostic Release request
-****************************************************************************/
-
-typedef struct _MPI2_DIAG_RELEASE_REQUEST
-{
- U8 Reserved1; /* 0x00 */
- U8 BufferType; /* 0x01 */
- U8 ChainOffset; /* 0x02 */
- U8 Function; /* 0x03 */
- U16 Reserved2; /* 0x04 */
- U8 Reserved3; /* 0x06 */
- U8 MsgFlags; /* 0x07 */
- U8 VP_ID; /* 0x08 */
- U8 VF_ID; /* 0x09 */
- U16 Reserved4; /* 0x0A */
-} MPI2_DIAG_RELEASE_REQUEST, MPI2_POINTER PTR_MPI2_DIAG_RELEASE_REQUEST,
- Mpi2DiagReleaseRequest_t, MPI2_POINTER pMpi2DiagReleaseRequest_t;
-
-
-/****************************************************************************
-* Diagnostic Buffer Post reply
-****************************************************************************/
-
-typedef struct _MPI2_DIAG_RELEASE_REPLY
-{
- U8 Reserved1; /* 0x00 */
- U8 BufferType; /* 0x01 */
- U8 MsgLength; /* 0x02 */
- U8 Function; /* 0x03 */
- U16 Reserved2; /* 0x04 */
- U8 Reserved3; /* 0x06 */
- U8 MsgFlags; /* 0x07 */
- U8 VP_ID; /* 0x08 */
- U8 VF_ID; /* 0x09 */
- U16 Reserved4; /* 0x0A */
- U16 Reserved5; /* 0x0C */
- U16 IOCStatus; /* 0x0E */
- U32 IOCLogInfo; /* 0x10 */
-} MPI2_DIAG_RELEASE_REPLY, MPI2_POINTER PTR_MPI2_DIAG_RELEASE_REPLY,
- Mpi2DiagReleaseReply_t, MPI2_POINTER pMpi2DiagReleaseReply_t;
-
-
-#endif
-
deleted file mode 100644
@@ -1,61 +0,0 @@
-/*
- * Copyright (c) 2000-2014 LSI Corporation.
- *
- *
- * Name: mpi2_type.h
- * Title: MPI basic type definitions
- * Creation Date: August 16, 2006
- *
- * mpi2_type.h Version: 02.00.00
- *
- * Version History
- * ---------------
- *
- * Date Version Description
- * -------- -------- ------------------------------------------------------
- * 04-30-07 02.00.00 Corresponds to Fusion-MPT MPI Specification Rev A.
- * --------------------------------------------------------------------------
- */
-
-#ifndef MPI2_TYPE_H
-#define MPI2_TYPE_H
-
-
-/*******************************************************************************
- * Define MPI2_POINTER if it hasn't already been defined. By default
- * MPI2_POINTER is defined to be a near pointer. MPI2_POINTER can be defined as
- * a far pointer by defining MPI2_POINTER as "far *" before this header file is
- * included.
- */
-#ifndef MPI2_POINTER
-#define MPI2_POINTER *
-#endif
-
-/* the basic types may have already been included by mpi_type.h */
-#ifndef MPI_TYPE_H
-/*****************************************************************************
-*
-* Basic Types
-*
-*****************************************************************************/
-
-typedef u8 U8;
-typedef __le16 U16;
-typedef __le32 U32;
-typedef __le64 U64 __attribute__((aligned(4)));
-
-/*****************************************************************************
-*
-* Pointer Types
-*
-*****************************************************************************/
-
-typedef U8 *PU8;
-typedef U16 *PU16;
-typedef U32 *PU32;
-typedef U64 *PU64;
-
-#endif
-
-#endif
-
@@ -297,8 +297,8 @@ typedef struct _MPI2_CONFIG_PAGE_MAN_10 {
U32 OEMSpecificFlags1; /* 20h */
U32 Reserved5[18]; /* 24h-60h*/
} MPI2_CONFIG_PAGE_MAN_10,
- MPI2_POINTER PTR_MPI2_CONFIG_PAGE_MAN_10,
- Mpi2ManufacturingPage10_t, MPI2_POINTER pMpi2ManufacturingPage10_t;
+ *PTR_MPI2_CONFIG_PAGE_MAN_10,
+ Mpi2ManufacturingPage10_t, *pMpi2ManufacturingPage10_t;
#define MFG_PAGE10_HIDE_SSDS_MASK (0x00000003)
#define MFG_PAGE10_HIDE_ALL_DISKS (0x00)
Use a single set of the hardware description headers instead of having them in the source tree twice. Signed-off-by: Sreekanth Reddy <sreekanth.reddy@avagotech.com> --- drivers/scsi/mpt2sas/Makefile | 4 + drivers/scsi/mpt2sas/mpi/mpi2.h | 1170 ------------- drivers/scsi/mpt2sas/mpi/mpi2_cnfg.h | 3068 ---------------------------------- drivers/scsi/mpt2sas/mpi/mpi2_init.h | 461 ----- drivers/scsi/mpt2sas/mpi/mpi2_ioc.h | 1708 ------------------- drivers/scsi/mpt2sas/mpi/mpi2_raid.h | 366 ---- drivers/scsi/mpt2sas/mpi/mpi2_sas.h | 288 ---- drivers/scsi/mpt2sas/mpi/mpi2_tool.h | 481 ------ drivers/scsi/mpt2sas/mpi/mpi2_type.h | 61 - drivers/scsi/mpt2sas/mpt2sas_base.h | 4 +- 10 files changed, 6 insertions(+), 7605 deletions(-) delete mode 100644 drivers/scsi/mpt2sas/mpi/mpi2.h delete mode 100644 drivers/scsi/mpt2sas/mpi/mpi2_cnfg.h delete mode 100644 drivers/scsi/mpt2sas/mpi/mpi2_init.h delete mode 100644 drivers/scsi/mpt2sas/mpi/mpi2_ioc.h delete mode 100644 drivers/scsi/mpt2sas/mpi/mpi2_raid.h delete mode 100644 drivers/scsi/mpt2sas/mpi/mpi2_sas.h delete mode 100644 drivers/scsi/mpt2sas/mpi/mpi2_tool.h delete mode 100644 drivers/scsi/mpt2sas/mpi/mpi2_type.h