From patchwork Wed Nov 11 12:00:28 2015 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Sreekanth Reddy X-Patchwork-Id: 7595491 Return-Path: X-Original-To: patchwork-linux-scsi@patchwork.kernel.org Delivered-To: patchwork-parsemail@patchwork1.web.kernel.org Received: from mail.kernel.org (mail.kernel.org [198.145.29.136]) by patchwork1.web.kernel.org (Postfix) with ESMTP id BD0EA9F2E9 for ; Wed, 11 Nov 2015 12:07:13 +0000 (UTC) Received: from mail.kernel.org (localhost [127.0.0.1]) by mail.kernel.org (Postfix) with ESMTP id E4FD220617 for ; Wed, 11 Nov 2015 12:07:10 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by mail.kernel.org (Postfix) with ESMTP id E82E9204FF for ; Wed, 11 Nov 2015 12:07:07 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752838AbbKKMCN (ORCPT ); Wed, 11 Nov 2015 07:02:13 -0500 Received: from mail-pa0-f52.google.com ([209.85.220.52]:33362 "EHLO mail-pa0-f52.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752829AbbKKMCK (ORCPT ); Wed, 11 Nov 2015 07:02:10 -0500 Received: by pabfh17 with SMTP id fh17so29732280pab.0 for ; Wed, 11 Nov 2015 04:02:09 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=avagotech.com; s=google; h=from:to:cc:subject:date:message-id:in-reply-to:references; bh=WbenwUVDY7sjlPNl2AZYtdYWxTlrDm411X3oDPp7zKk=; b=DrK7XUHeeVAUPkwBoeUxDIH8v89F4rMMCxK2rq65Uox69KGY4aAq1H+lxnSjE5vMTE imA2TZwvvTAnjR+nwjBZnBFod3ARbkFYvBwBOAfm4AjsGNrXLtVQHjeYCVz5zDS3ZvJj 1KF1vHWIIas/9FJqrnB6vsVWNJX56Dw3I2354= X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20130820; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references; bh=WbenwUVDY7sjlPNl2AZYtdYWxTlrDm411X3oDPp7zKk=; b=cKETuW7wekAfJHpnhEauyVf8jLKlti38e7MehbjwQJ4/lCUzJavBJbe8iE5F1yWG05 mQgV8CJXJMwPMUSrTxOfmmKx4rH1SRj7w0yy84c4ggoL0qDrtpW/a5tbinvetHmttQvT lYC+MYouJsbwQaOQsdazAksMTzfcb7FyDlakKmVg3jFZpdp8PbMyOtRxcJmzXqN2Ktx4 Nx1Xw16nhk4U/fRpCLRFZrFy6se3S8kEiOKxSz6rCM+1J/V7zLRj+CRx8cjLiWoyp+f4 jb31ZiA8gegr2s3+TbKC1jwTcwLCK2IpVFvO4xVvjJftkZVxMg5scbnFNGplxLRl3dzj k8Hw== X-Gm-Message-State: ALoCoQmoTp/p5ze7Hx4m9nXjvje0UWnb1mJeKAwjP8WBY5f52vYHUEW2kqrz5sbN7QEZLsAhQAEz X-Received: by 10.68.92.194 with SMTP id co2mr13666233pbb.125.1447243329326; Wed, 11 Nov 2015 04:02:09 -0800 (PST) Received: from host1.lsi.com ([192.19.239.250]) by smtp.gmail.com with ESMTPSA id zi1sm9180851pbc.10.2015.11.11.04.02.03 (version=TLS1_2 cipher=ECDHE-RSA-AES128-SHA bits=128/128); Wed, 11 Nov 2015 04:02:08 -0800 (PST) From: Sreekanth Reddy X-Google-Original-From: Sreekanth Reddy To: jejb@kernel.org Cc: martin.petersen@oracle.com, linux-scsi@vger.kernel.org, JBottomley@Parallels.com, Sathya.Prakash@avagotech.com, kashyap.desai@avagotech.com, linux-kernel@vger.kernel.org, hch@infradead.org, chaitra.basappa@avagotech.com, suganath-prabu.subramani@avagotech.com, Sreekanth Reddy , Sreekanth Reddy Subject: [PATCH RESEND 12/25] mpt3sas: Ported WarpDrive product SSS6200 support Date: Wed, 11 Nov 2015 17:30:28 +0530 Message-Id: <1447243241-10912-13-git-send-email-Sreekanth.Reddy@avagotech.com> X-Mailer: git-send-email 2.0.2 In-Reply-To: <1447243241-10912-1-git-send-email-Sreekanth.Reddy@avagotech.com> References: <1447243241-10912-1-git-send-email-Sreekanth.Reddy@avagotech.com> Sender: linux-scsi-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-scsi@vger.kernel.org X-Spam-Status: No, score=-7.1 required=5.0 tests=BAYES_00,DKIM_SIGNED, RCVD_IN_DNSWL_HI,RP_MATCHES_RCVD,T_DKIM_INVALID,UNPARSEABLE_RELAY autolearn=unavailable version=3.3.1 X-Spam-Checker-Version: SpamAssassin 3.3.1 (2010-03-16) on mail.kernel.org X-Virus-Scanned: ClamAV using ClamSMTP From: Sreekanth Reddy Ported below list of Warp drive specific patches 1. 'commit 0bdccdb0a090ad8dc5f851cad5e843244c410ee8 ("mpt2sas: WarpDrive New product SSS6200 support added")', 2. 'commit 82a452581230b3ffc9d6475dffdb2568497b5fec ("mpt2sas: WarpDrive Infinite command retries due to wrong scsi command entry in MPI message")', 3. 'commit ba96bd0b1d4a4e11f23671e1f375a5c8f46b0fe7 ("mpt2sas: Support for greater than 2TB capacity WarpDrive")', 4. 'commit 4da7af9494b2f98a1503a2634059300c3e4615e6 ("mpt2sas: Do not retry a timed out direct IO for Warpdrive")', 5. 'commit daeaa9df92bd742f4e6d4d6039d689277a8e31bd ("mpt2sas: Avoid type casting for direct I/O commands")'. Also set the mpt2_ioctl_iocinfo structure's adpter_type to MPT3_IOCTL_INTERFACE_SAS3 for Gen3 HBA's MPT2_IOCTL_INTERFACE_SAS2_SSS6200 for Warp Drive MPT2_IOCTL_INTERFACE_SAS2 for other Gen2 HBA's Signed-off-by: Sreekanth Reddy --- drivers/scsi/mpt2sas/mpt2sas_warpdrive.c | 338 +++++++++++++++++++++++++++++++ drivers/scsi/mpt3sas/mpt3sas_base.c | 68 ++++++- drivers/scsi/mpt3sas/mpt3sas_base.h | 39 ++++ drivers/scsi/mpt3sas/mpt3sas_ctl.c | 5 +- drivers/scsi/mpt3sas/mpt3sas_ctl.h | 1 + drivers/scsi/mpt3sas/mpt3sas_scsih.c | 260 ++++++++++++++++++++---- 6 files changed, 665 insertions(+), 46 deletions(-) create mode 100644 drivers/scsi/mpt2sas/mpt2sas_warpdrive.c diff --git a/drivers/scsi/mpt2sas/mpt2sas_warpdrive.c b/drivers/scsi/mpt2sas/mpt2sas_warpdrive.c new file mode 100644 index 0000000..c4fcbc2 --- /dev/null +++ b/drivers/scsi/mpt2sas/mpt2sas_warpdrive.c @@ -0,0 +1,338 @@ +/* + * Scsi Host Layer for MPT (Message Passing Technology) based controllers + * + * Copyright (C) 2012-2014 LSI Corporation + * Copyright (C) 2013-2015 Avago Technologies + * (mailto: MPT-FusionLinux.pdl@avagotech.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * NO WARRANTY + * THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR + * CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT + * LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT, + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is + * solely responsible for determining the appropriateness of using and + * distributing the Program and assumes all risks associated with its + * exercise of rights under this Agreement, including but not limited to + * the risks and costs of program errors, damage to or loss of data, + * programs or equipment, and unavailability or interruption of operations. + + * DISCLAIMER OF LIABILITY + * NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR + * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE + * USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED + * HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES + + * You should have received a copy of the GNU General Public License + * along with this program. + */ + +/** + * _scsih_disable_ddio - Disable direct I/O for all the volumes + * @ioc: per adapter object + */ +static void +_scsih_disable_ddio(struct MPT3SAS_ADAPTER *ioc) +{ + Mpi2RaidVolPage1_t vol_pg1; + Mpi2ConfigReply_t mpi_reply; + struct _raid_device *raid_device; + u16 handle; + u16 ioc_status; + unsigned long flags; + + handle = 0xFFFF; + while (!(mpt3sas_config_get_raid_volume_pg1(ioc, &mpi_reply, + &vol_pg1, MPI2_RAID_VOLUME_PGAD_FORM_GET_NEXT_HANDLE, handle))) { + ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & + MPI2_IOCSTATUS_MASK; + if (ioc_status == MPI2_IOCSTATUS_CONFIG_INVALID_PAGE) + break; + handle = le16_to_cpu(vol_pg1.DevHandle); + spin_lock_irqsave(&ioc->raid_device_lock, flags); + raid_device = _scsih_raid_device_find_by_handle(ioc, handle); + if (raid_device) + raid_device->direct_io_enabled = 0; + spin_unlock_irqrestore(&ioc->raid_device_lock, flags); + } + return; +} + + +/** + * _scsih_get_num_volumes - Get number of volumes in the ioc + * @ioc: per adapter object + */ +static u8 +_scsih_get_num_volumes(struct MPT3SAS_ADAPTER *ioc) +{ + Mpi2RaidVolPage1_t vol_pg1; + Mpi2ConfigReply_t mpi_reply; + u16 handle; + u8 vol_cnt = 0; + u16 ioc_status; + + handle = 0xFFFF; + while (!(mpt3sas_config_get_raid_volume_pg1(ioc, &mpi_reply, + &vol_pg1, MPI2_RAID_VOLUME_PGAD_FORM_GET_NEXT_HANDLE, handle))) { + ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & + MPI2_IOCSTATUS_MASK; + if (ioc_status == MPI2_IOCSTATUS_CONFIG_INVALID_PAGE) + break; + vol_cnt++; + handle = le16_to_cpu(vol_pg1.DevHandle); + } + return vol_cnt; +} + + +/** + * _scsih_init_warpdrive_properties - Set properties for warpdrive direct I/O. + * @ioc: per adapter object + * @raid_device: the raid_device object + */ +static void +_scsih_init_warpdrive_properties(struct MPT3SAS_ADAPTER *ioc, + struct _raid_device *raid_device) +{ + Mpi2RaidVolPage0_t *vol_pg0; + Mpi2RaidPhysDiskPage0_t pd_pg0; + Mpi2ConfigReply_t mpi_reply; + u16 sz; + u8 num_pds, count; + unsigned long stripe_sz, block_sz; + u8 stripe_exp, block_exp; + u64 dev_max_lba; + + if (!ioc->is_warpdrive) + return; + + if (ioc->mfg_pg10_hide_flag == MFG_PAGE10_EXPOSE_ALL_DISKS) { + pr_info(MPT3SAS_FMT "WarpDrive : Direct IO is disabled " + "globally as drives are exposed\n", ioc->name); + return; + } + if (_scsih_get_num_volumes(ioc) > 1) { + _scsih_disable_ddio(ioc); + pr_info(MPT3SAS_FMT "WarpDrive : Direct IO is disabled " + "globally as number of drives > 1\n", ioc->name); + return; + } + if ((mpt3sas_config_get_number_pds(ioc, raid_device->handle, + &num_pds)) || !num_pds) { + pr_info(MPT3SAS_FMT "WarpDrive : Direct IO is disabled " + "Failure in computing number of drives\n", ioc->name); + return; + } + + sz = offsetof(Mpi2RaidVolPage0_t, PhysDisk) + (num_pds * + sizeof(Mpi2RaidVol0PhysDisk_t)); + vol_pg0 = kzalloc(sz, GFP_KERNEL); + if (!vol_pg0) { + pr_info(MPT3SAS_FMT "WarpDrive : Direct IO is disabled " + "Memory allocation failure for RVPG0\n", ioc->name); + return; + } + + if ((mpt3sas_config_get_raid_volume_pg0(ioc, &mpi_reply, vol_pg0, + MPI2_RAID_VOLUME_PGAD_FORM_HANDLE, raid_device->handle, sz))) { + pr_info(MPT3SAS_FMT "WarpDrive : Direct IO is disabled " + "Failure in retrieving RVPG0\n", ioc->name); + kfree(vol_pg0); + return; + } + + /* + * WARPDRIVE:If number of physical disks in a volume exceeds the max pds + * assumed for WARPDRIVE, disable direct I/O + */ + if (num_pds > MPT_MAX_WARPDRIVE_PDS) { + pr_warn(MPT3SAS_FMT "WarpDrive : Direct IO is disabled " + "for the drive with handle(0x%04x): num_mem=%d, " + "max_mem_allowed=%d\n", ioc->name, raid_device->handle, + num_pds, MPT_MAX_WARPDRIVE_PDS); + kfree(vol_pg0); + return; + } + for (count = 0; count < num_pds; count++) { + if (mpt3sas_config_get_phys_disk_pg0(ioc, &mpi_reply, + &pd_pg0, MPI2_PHYSDISK_PGAD_FORM_PHYSDISKNUM, + vol_pg0->PhysDisk[count].PhysDiskNum) || + pd_pg0.DevHandle == MPT3SAS_INVALID_DEVICE_HANDLE) { + pr_info(MPT3SAS_FMT "WarpDrive : Direct IO is " + "disabled for the drive with handle(0x%04x) member" + "handle retrieval failed for member number=%d\n", + ioc->name, raid_device->handle, + vol_pg0->PhysDisk[count].PhysDiskNum); + goto out_error; + } + /* Disable direct I/O if member drive lba exceeds 4 bytes */ + dev_max_lba = le64_to_cpu(pd_pg0.DeviceMaxLBA); + if (dev_max_lba >> 32) { + pr_info(MPT3SAS_FMT "WarpDrive : Direct IO is " + "disabled for the drive with handle(0x%04x) member" + " handle (0x%04x) unsupported max lba 0x%016llx\n", + ioc->name, raid_device->handle, + le16_to_cpu(pd_pg0.DevHandle), + (unsigned long long)dev_max_lba); + goto out_error; + } + + raid_device->pd_handle[count] = le16_to_cpu(pd_pg0.DevHandle); + } + + /* + * Assumption for WD: Direct I/O is not supported if the volume is + * not RAID0 + */ + if (raid_device->volume_type != MPI2_RAID_VOL_TYPE_RAID0) { + pr_info(MPT3SAS_FMT "WarpDrive : Direct IO is disabled " + "for the drive with handle(0x%04x): type=%d, " + "s_sz=%uK, blk_size=%u\n", ioc->name, + raid_device->handle, raid_device->volume_type, + (le32_to_cpu(vol_pg0->StripeSize) * + le16_to_cpu(vol_pg0->BlockSize)) / 1024, + le16_to_cpu(vol_pg0->BlockSize)); + goto out_error; + } + + stripe_sz = le32_to_cpu(vol_pg0->StripeSize); + stripe_exp = find_first_bit(&stripe_sz, 32); + if (stripe_exp == 32) { + pr_info(MPT3SAS_FMT "WarpDrive : Direct IO is disabled " + "for the drive with handle(0x%04x) invalid stripe sz %uK\n", + ioc->name, raid_device->handle, + (le32_to_cpu(vol_pg0->StripeSize) * + le16_to_cpu(vol_pg0->BlockSize)) / 1024); + goto out_error; + } + raid_device->stripe_exponent = stripe_exp; + block_sz = le16_to_cpu(vol_pg0->BlockSize); + block_exp = find_first_bit(&block_sz, 16); + if (block_exp == 16) { + pr_info(MPT3SAS_FMT "WarpDrive : Direct IO is disabled " + "for the drive with handle(0x%04x) invalid block sz %u\n", + ioc->name, raid_device->handle, + le16_to_cpu(vol_pg0->BlockSize)); + goto out_error; + } + raid_device->block_exponent = block_exp; + raid_device->direct_io_enabled = 1; + + pr_info(MPT3SAS_FMT "WarpDrive : Direct IO is Enabled for the drive" + " with handle(0x%04x)\n", ioc->name, raid_device->handle); + /* + * WARPDRIVE: Though the following fields are not used for direct IO, + * stored for future purpose: + */ + raid_device->max_lba = le64_to_cpu(vol_pg0->MaxLBA); + raid_device->stripe_sz = le32_to_cpu(vol_pg0->StripeSize); + raid_device->block_sz = le16_to_cpu(vol_pg0->BlockSize); + + + kfree(vol_pg0); + return; + +out_error: + raid_device->direct_io_enabled = 0; + for (count = 0; count < num_pds; count++) + raid_device->pd_handle[count] = 0; + kfree(vol_pg0); + return; +} + +/** + * _scsih_scsi_direct_io_get - returns direct io flag + * @ioc: per adapter object + * @smid: system request message index + * + * Returns the smid stored scmd pointer. + */ +static inline u8 +_scsih_scsi_direct_io_get(struct MPT3SAS_ADAPTER *ioc, u16 smid) +{ + return ioc->scsi_lookup[smid - 1].direct_io; +} + +/** + * _scsih_scsi_direct_io_set - sets direct io flag + * @ioc: per adapter object + * @smid: system request message index + * @direct_io: Zero or non-zero value to set in the direct_io flag + * + * Returns Nothing. + */ +static inline void +_scsih_scsi_direct_io_set(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 direct_io) +{ + ioc->scsi_lookup[smid - 1].direct_io = direct_io; +} + +/** + * _scsih_setup_direct_io - setup MPI request for WARPDRIVE Direct I/O + * @ioc: per adapter object + * @scmd: pointer to scsi command object + * @raid_device: pointer to raid device data structure + * @mpi_request: pointer to the SCSI_IO reqest message frame + * @smid: system request message index + * + * Returns nothing + */ +static void +_scsih_setup_direct_io(struct MPT3SAS_ADAPTER *ioc, struct scsi_cmnd *scmd, + struct _raid_device *raid_device, Mpi2SCSIIORequest_t *mpi_request, + u16 smid) +{ + sector_t v_lba, p_lba, stripe_off, stripe_unit, column, io_size; + u32 stripe_sz, stripe_exp; + u8 num_pds, cmd = scmd->cmnd[0]; + + if (cmd != READ_10 && cmd != WRITE_10 && + cmd != READ_16 && cmd != WRITE_16) + return; + + if (cmd == READ_10 || cmd == WRITE_10) + v_lba = get_unaligned_be32(&mpi_request->CDB.CDB32[2]); + else + v_lba = get_unaligned_be64(&mpi_request->CDB.CDB32[2]); + + io_size = scsi_bufflen(scmd) >> raid_device->block_exponent; + + if (v_lba + io_size - 1 > raid_device->max_lba) + return; + + stripe_sz = raid_device->stripe_sz; + stripe_exp = raid_device->stripe_exponent; + stripe_off = v_lba & (stripe_sz - 1); + + /* Return unless IO falls within a stripe */ + if (stripe_off + io_size > stripe_sz) + return; + + num_pds = raid_device->num_pds; + p_lba = v_lba >> stripe_exp; + stripe_unit = p_lba / num_pds; + column = p_lba % num_pds; + p_lba = (stripe_unit << stripe_exp) + stripe_off; + mpi_request->DevHandle = cpu_to_le16(raid_device->pd_handle[column]); + + if (cmd == READ_10 || cmd == WRITE_10) + put_unaligned_be32(lower_32_bits(p_lba), + &mpi_request->CDB.CDB32[2]); + else + put_unaligned_be64(p_lba, &mpi_request->CDB.CDB32[2]); + + _scsih_scsi_direct_io_set(ioc, smid, 1); +} diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.c b/drivers/scsi/mpt3sas/mpt3sas_base.c index b5b1eb2..f7f2ab5 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_base.c +++ b/drivers/scsi/mpt3sas/mpt3sas_base.c @@ -593,7 +593,8 @@ _base_display_event_data(struct MPT3SAS_ADAPTER *ioc, desc = "Device Status Change"; break; case MPI2_EVENT_IR_OPERATION_STATUS: - desc = "IR Operation Status"; + if (!ioc->hide_ir_msg) + desc = "IR Operation Status"; break; case MPI2_EVENT_SAS_DISCOVERY: { @@ -624,16 +625,20 @@ _base_display_event_data(struct MPT3SAS_ADAPTER *ioc, desc = "SAS Enclosure Device Status Change"; break; case MPI2_EVENT_IR_VOLUME: - desc = "IR Volume"; + if (!ioc->hide_ir_msg) + desc = "IR Volume"; break; case MPI2_EVENT_IR_PHYSICAL_DISK: - desc = "IR Physical Disk"; + if (!ioc->hide_ir_msg) + desc = "IR Physical Disk"; break; case MPI2_EVENT_IR_CONFIGURATION_CHANGE_LIST: - desc = "IR Configuration Change List"; + if (!ioc->hide_ir_msg) + desc = "IR Configuration Change List"; break; case MPI2_EVENT_LOG_ENTRY_ADDED: - desc = "Log Entry Added"; + if (!ioc->hide_ir_msg) + desc = "Log Entry Added"; break; case MPI2_EVENT_TEMP_THRESHOLD: desc = "Temperature Threshold"; @@ -689,7 +694,10 @@ _base_sas_log_info(struct MPT3SAS_ADAPTER *ioc , u32 log_info) originator_str = "PL"; break; case 2: - originator_str = "IR"; + if (!ioc->hide_ir_msg) + originator_str = "IR"; + else + originator_str = "WarpDrive"; break; } @@ -1023,6 +1031,12 @@ _base_interrupt(int irq, void *bus_id) } wmb(); + if (ioc->is_warpdrive) { + writel(reply_q->reply_post_host_index, + ioc->reply_post_host_index[msix_index]); + atomic_dec(&reply_q->busy); + return IRQ_HANDLED; + } /* Update Reply Post Host Index. * For those HBA's which support combined reply queue feature @@ -2333,6 +2347,7 @@ mpt3sas_base_free_smid(struct MPT3SAS_ADAPTER *ioc, u16 smid) } ioc->scsi_lookup[i].cb_idx = 0xFF; ioc->scsi_lookup[i].scmd = NULL; + ioc->scsi_lookup[i].direct_io = 0; list_add(&ioc->scsi_lookup[i].tracker_list, &ioc->free_list); spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags); @@ -2683,10 +2698,12 @@ _base_display_ioc_capabilities(struct MPT3SAS_ADAPTER *ioc) pr_info("), "); pr_info("Capabilities=("); - if (ioc->facts.IOCCapabilities & + if (!ioc->hide_ir_msg) { + if (ioc->facts.IOCCapabilities & MPI2_IOCFACTS_CAPABILITY_INTEGRATED_RAID) { pr_info("Raid"); i++; + } } if (ioc->facts.IOCCapabilities & MPI2_IOCFACTS_CAPABILITY_TLR) { @@ -4834,6 +4851,7 @@ _base_make_ioc_operational(struct MPT3SAS_ADAPTER *ioc, int sleep_flag) u32 reply_address; u16 smid; struct _tr_list *delayed_tr, *delayed_tr_next; + u8 hide_flag; struct adapter_reply_queue *reply_q; long reply_post_free; u32 reply_post_free_sz, index = 0; @@ -4864,6 +4882,7 @@ _base_make_ioc_operational(struct MPT3SAS_ADAPTER *ioc, int sleep_flag) ioc->scsi_lookup[i].cb_idx = 0xFF; ioc->scsi_lookup[i].smid = smid; ioc->scsi_lookup[i].scmd = NULL; + ioc->scsi_lookup[i].direct_io = 0; list_add_tail(&ioc->scsi_lookup[i].tracker_list, &ioc->free_list); } @@ -4966,6 +4985,16 @@ _base_make_ioc_operational(struct MPT3SAS_ADAPTER *ioc, int sleep_flag) if (ioc->is_driver_loading) { + + if (ioc->is_warpdrive && ioc->manu_pg10.OEMIdentifier + == 0x80) { + hide_flag = (u8) ( + le32_to_cpu(ioc->manu_pg10.OEMSpecificFlags0) & + MFG_PAGE10_HIDE_SSDS_MASK); + if (hide_flag != MFG_PAGE10_HIDE_SSDS_MASK) + ioc->mfg_pg10_hide_flag = hide_flag; + } + ioc->wait_for_discovery_to_complete = _base_determine_wait_on_discovery(ioc); @@ -5032,12 +5061,33 @@ mpt3sas_base_attach(struct MPT3SAS_ADAPTER *ioc) goto out_free_resources; } + if (ioc->is_warpdrive) { + ioc->reply_post_host_index = kcalloc(ioc->cpu_msix_table_sz, + sizeof(resource_size_t *), GFP_KERNEL); + if (!ioc->reply_post_host_index) { + dfailprintk(ioc, pr_info(MPT3SAS_FMT "allocation " + "for cpu_msix_table failed!!!\n", ioc->name)); + r = -ENOMEM; + goto out_free_resources; + } + } + ioc->rdpq_array_enable_assigned = 0; ioc->dma_mask = 0; r = mpt3sas_base_map_resources(ioc); if (r) goto out_free_resources; + if (ioc->is_warpdrive) { + ioc->reply_post_host_index[0] = (resource_size_t __iomem *) + &ioc->chip->ReplyPostHostIndex; + + for (i = 1; i < ioc->cpu_msix_table_sz; i++) + ioc->reply_post_host_index[i] = + (resource_size_t __iomem *) + ((u8 __iomem *)&ioc->chip->Doorbell + (0x4000 + ((i - 1) + * 4))); + } pci_set_drvdata(ioc->pdev, ioc->shost); r = _base_get_ioc_facts(ioc, CAN_SLEEP); @@ -5189,6 +5239,8 @@ mpt3sas_base_attach(struct MPT3SAS_ADAPTER *ioc) _base_release_memory_pools(ioc); pci_set_drvdata(ioc->pdev, NULL); kfree(ioc->cpu_msix_table); + if (ioc->is_warpdrive) + kfree(ioc->reply_post_host_index); kfree(ioc->pd_handles); kfree(ioc->blocking_handles); kfree(ioc->tm_cmds.reply); @@ -5228,6 +5280,8 @@ mpt3sas_base_detach(struct MPT3SAS_ADAPTER *ioc) _base_release_memory_pools(ioc); pci_set_drvdata(ioc->pdev, NULL); kfree(ioc->cpu_msix_table); + if (ioc->is_warpdrive) + kfree(ioc->reply_post_host_index); kfree(ioc->pd_handles); kfree(ioc->blocking_handles); kfree(ioc->pfacts); diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.h b/drivers/scsi/mpt3sas/mpt3sas_base.h index a0d1f13..397f8a5 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_base.h +++ b/drivers/scsi/mpt3sas/mpt3sas_base.h @@ -135,6 +135,16 @@ #define MPT3SAS_FMT "%s: " /* + * WarpDrive Specific Log codes + */ + +#define MPT2_WARPDRIVE_LOGENTRY (0x8002) +#define MPT2_WARPDRIVE_LC_SSDT (0x41) +#define MPT2_WARPDRIVE_LC_SSDLW (0x43) +#define MPT2_WARPDRIVE_LC_SSDLF (0x44) +#define MPT2_WARPDRIVE_LC_BRMF (0x4D) + +/* * per target private data */ #define MPT_TARGET_FLAGS_RAID_COMPONENT 0x01 @@ -257,6 +267,7 @@ struct Mpi2ManufacturingPage11_t { * struct MPT3SAS_TARGET - starget private hostdata * @starget: starget object * @sas_address: target sas address + * @raid_device: raid_device pointer to access volume data * @handle: device handle * @num_luns: number luns * @flags: MPT_TARGET_FLAGS_XXX flags @@ -266,6 +277,7 @@ struct Mpi2ManufacturingPage11_t { struct MPT3SAS_TARGET { struct scsi_target *starget; u64 sas_address; + struct _raid_device *raid_device; u16 handle; int num_luns; u32 flags; @@ -280,6 +292,11 @@ struct MPT3SAS_TARGET { #define MPT_DEVICE_FLAGS_INIT 0x01 #define MPT_DEVICE_TLR_ON 0x02 +#define MFG_PAGE10_HIDE_SSDS_MASK (0x00000003) +#define MFG_PAGE10_HIDE_ALL_DISKS (0x00) +#define MFG_PAGE10_EXPOSE_ALL_DISKS (0x01) +#define MFG_PAGE10_HIDE_IF_VOL_PRESENT (0x02) + /** * struct MPT3SAS_DEVICE - sdev private hostdata * @sas_target: starget private hostdata @@ -381,6 +398,7 @@ struct _sas_device { * @sdev: scsi device struct (volumes are single lun) * @wwid: unique identifier for the volume * @handle: device handle + * @block_size: Block size of the volume * @id: target id * @channel: target channel * @volume_type: the raid level @@ -388,6 +406,13 @@ struct _sas_device { * @num_pds: number of hidden raid components * @responding: used in _scsih_raid_device_mark_responding * @percent_complete: resync percent complete + * @direct_io_enabled: Whether direct io to PDs are allowed or not + * @stripe_exponent: X where 2powX is the stripe sz in blocks + * @block_exponent: X where 2powX is the block sz in bytes + * @max_lba: Maximum number of LBA in the volume + * @stripe_sz: Stripe Size of the volume + * @device_info: Device info of the volume member disk + * @pd_handle: Array of handles of the physical drives for direct I/O in le16 */ #define MPT_MAX_WARPDRIVE_PDS 8 struct _raid_device { @@ -396,13 +421,20 @@ struct _raid_device { struct scsi_device *sdev; u64 wwid; u16 handle; + u16 block_sz; int id; int channel; u8 volume_type; u8 num_pds; u8 responding; u8 percent_complete; + u8 direct_io_enabled; + u8 stripe_exponent; + u8 block_exponent; + u64 max_lba; + u32 stripe_sz; u32 device_info; + u16 pd_handle[MPT_MAX_WARPDRIVE_PDS]; }; /** @@ -511,12 +543,14 @@ struct chain_tracker { * @smid: system message id * @scmd: scsi request pointer * @cb_idx: callback index + * @direct_io: To indicate whether I/O is direct (WARPDRIVE) * @tracker_list: list of free request (ioc->free_list) */ struct scsiio_tracker { u16 smid; struct scsi_cmnd *scmd; u8 cb_idx; + u8 direct_io; struct list_head chain_list; struct list_head tracker_list; }; @@ -843,6 +877,7 @@ struct MPT3SAS_ADAPTER { u16 msix_vector_count; u8 *cpu_msix_table; u16 cpu_msix_table_sz; + resource_size_t __iomem **reply_post_host_index; u32 ioc_reset_count; MPT3SAS_FLUSH_RUNNING_CMDS schedule_dead_ioc_flush_running_cmds; u32 non_operational_loop; @@ -1014,6 +1049,10 @@ struct MPT3SAS_ADAPTER { u32 diagnostic_flags[MPI2_DIAG_BUF_TYPE_COUNT]; u32 ring_buffer_offset; u32 ring_buffer_sz; + u8 is_warpdrive; + u8 hide_ir_msg; + u8 mfg_pg10_hide_flag; + u8 hide_drives; spinlock_t diag_trigger_lock; u8 diag_trigger_active; struct SL_WH_MASTER_TRIGGER_T diag_trigger_master; diff --git a/drivers/scsi/mpt3sas/mpt3sas_ctl.c b/drivers/scsi/mpt3sas/mpt3sas_ctl.c index 5c08d31..3f22754 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_ctl.c +++ b/drivers/scsi/mpt3sas/mpt3sas_ctl.c @@ -1030,7 +1030,10 @@ _ctl_getiocinfo(struct MPT3SAS_ADAPTER *ioc, void __user *arg) strcat(karg.driver_version, "-"); switch (ioc->hba_mpi_version_belonged) { case MPI2_VERSION: - karg.adapter_type = MPT2_IOCTL_INTERFACE_SAS2; + if (ioc->is_warpdrive) + karg.adapter_type = MPT2_IOCTL_INTERFACE_SAS2_SSS6200; + else + karg.adapter_type = MPT2_IOCTL_INTERFACE_SAS2; strcat(karg.driver_version, MPT2SAS_DRIVER_VERSION); break; case MPI25_VERSION: diff --git a/drivers/scsi/mpt3sas/mpt3sas_ctl.h b/drivers/scsi/mpt3sas/mpt3sas_ctl.h index f43e3c2..8940835 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_ctl.h +++ b/drivers/scsi/mpt3sas/mpt3sas_ctl.h @@ -141,6 +141,7 @@ struct mpt3_ioctl_pci_info { #define MPT2_IOCTL_INTERFACE_FC_IP (0x02) #define MPT2_IOCTL_INTERFACE_SAS (0x03) #define MPT2_IOCTL_INTERFACE_SAS2 (0x04) +#define MPT2_IOCTL_INTERFACE_SAS2_SSS6200 (0x05) #define MPT3_IOCTL_INTERFACE_SAS3 (0x06) #define MPT2_IOCTL_VERSION_LENGTH (32) diff --git a/drivers/scsi/mpt3sas/mpt3sas_scsih.c b/drivers/scsi/mpt3sas/mpt3sas_scsih.c index 2b51a41..dc6b0ba 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_scsih.c +++ b/drivers/scsi/mpt3sas/mpt3sas_scsih.c @@ -54,6 +54,7 @@ #include #include #include +#include #include "mpt3sas_base.h" @@ -70,6 +71,21 @@ static int _scsih_add_device(struct MPT3SAS_ADAPTER *ioc, u16 handle, static u8 _scsih_check_for_pending_tm(struct MPT3SAS_ADAPTER *ioc, u16 smid); +#ifdef SCSI_MPT2SAS +static void _scsih_disable_ddio(struct MPT3SAS_ADAPTER *ioc); +static u8 _scsih_get_num_volumes(struct MPT3SAS_ADAPTER *ioc); +static void +_scsih_init_warpdrive_properties(struct MPT3SAS_ADAPTER *ioc, + struct _raid_device *raid_device); +static inline u8 +_scsih_scsi_direct_io_get(struct MPT3SAS_ADAPTER *ioc, u16 smid); +static inline void +_scsih_scsi_direct_io_set(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 direct_io); +static void +_scsih_setup_direct_io(struct MPT3SAS_ADAPTER *ioc, struct scsi_cmnd *scmd, + struct _raid_device *raid_device, Mpi2SCSIIORequest_t *mpi_request, + u16 smid); +#endif /* global parameters */ LIST_HEAD(mpt3sas_ioc_list); @@ -1144,7 +1160,9 @@ scsih_target_alloc(struct scsi_target *starget) sas_target_priv_data->handle = raid_device->handle; sas_target_priv_data->sas_address = raid_device->wwid; sas_target_priv_data->flags |= MPT_TARGET_FLAGS_VOLUME; - raid_device->starget = starget; + sas_target_priv_data->raid_device = raid_device; + if (ioc->is_warpdrive) + raid_device->starget = starget; } spin_unlock_irqrestore(&ioc->raid_device_lock, flags); return 0; @@ -1386,7 +1404,10 @@ int scsih_is_raid(struct device *dev) { struct scsi_device *sdev = to_scsi_device(dev); + struct MPT3SAS_ADAPTER *ioc = shost_priv(sdev->host); + if (ioc->is_warpdrive) + return 0; return (sdev->channel == RAID_CHANNEL) ? 1 : 0; } @@ -1409,6 +1430,9 @@ scsih_get_resync(struct device *dev) percent_complete = 0; handle = 0; + if (ioc->is_warpdrive) + goto out; + spin_lock_irqsave(&ioc->raid_device_lock, flags); raid_device = _scsih_raid_device_find_by_id(ioc, sdev->id, sdev->channel); @@ -1592,8 +1616,6 @@ _scsih_get_volume_capabilities(struct MPT3SAS_ADAPTER *ioc, return 0; } - - /** * _scsih_enable_tlr - setting TLR flags * @ioc: per adapter object @@ -1672,6 +1694,12 @@ scsih_slave_configure(struct scsi_device *sdev) return 1; } +#ifdef SCSI_MPT2SAS + /* + * WARPDRIVE: Initialize the required data for Direct IO + */ + _scsih_init_warpdrive_properties(ioc, raid_device); +#endif /* RAID Queue Depth Support * IS volume = underlying qdepth of drive type, either @@ -1720,17 +1748,19 @@ scsih_slave_configure(struct scsi_device *sdev) break; } - sdev_printk(KERN_INFO, sdev, - "%s: handle(0x%04x), wwid(0x%016llx), pd_count(%d), type(%s)\n", - r_level, raid_device->handle, - (unsigned long long)raid_device->wwid, - raid_device->num_pds, ds); - + if (!ioc->hide_ir_msg) + sdev_printk(KERN_INFO, sdev, + "%s: handle(0x%04x), wwid(0x%016llx)," + " pd_count(%d), type(%s)\n", + r_level, raid_device->handle, + (unsigned long long)raid_device->wwid, + raid_device->num_pds, ds); scsih_change_queue_depth(sdev, qdepth); -/* raid transport support */ - _scsih_set_level(sdev, raid_device->volume_type); + /* raid transport support */ + if (!ioc->is_warpdrive) + _scsih_set_level(sdev, raid_device->volume_type); return 0; } @@ -2179,7 +2209,10 @@ _scsih_tm_display_info(struct MPT3SAS_ADAPTER *ioc, struct scsi_cmnd *scmd) if (!priv_target) return; - device_str = "volume"; + if (ioc->hide_ir_msg) + device_str = "WarpDrive"; + else + device_str = "volume"; scsi_print_command(scmd); if (priv_target->flags & MPT_TARGET_FLAGS_VOLUME) { @@ -3368,6 +3401,9 @@ _scsih_check_ir_config_unhide_events(struct MPT3SAS_ADAPTER *ioc, a = 0; b = 0; + if (ioc->is_warpdrive) + return; + /* Volume Resets for Deleted or Removed */ element = (Mpi2EventIrConfigElement_t *)&event_data->ConfigElement[0]; for (i = 0; i < event_data->NumElements; i++, element++) { @@ -3604,6 +3640,7 @@ _scsih_eedp_error_handling(struct scsi_cmnd *scmd, u16 ioc_status) } + /** * scsih_qcmd - main scsi request entry point * @scmd: pointer to scsi command object @@ -3621,6 +3658,9 @@ scsih_qcmd(struct Scsi_Host *shost, struct scsi_cmnd *scmd) struct MPT3SAS_ADAPTER *ioc = shost_priv(shost); struct MPT3SAS_DEVICE *sas_device_priv_data; struct MPT3SAS_TARGET *sas_target_priv_data; +#ifdef SCSI_MPT2SAS + struct _raid_device *raid_device; +#endif Mpi2SCSIIORequest_t *mpi_request; u32 mpi_control; u16 smid; @@ -3677,7 +3717,11 @@ scsih_qcmd(struct Scsi_Host *shost, struct scsi_cmnd *scmd) /* set tags */ mpi_control |= MPI2_SCSIIO_CONTROL_SIMPLEQ; - if ((sas_device_priv_data->flags & MPT_DEVICE_TLR_ON) && + /* Make sure Device is not raid volume. + * We do not expose raid functionality to upper layer for warpdrive. + */ + if (!ioc->is_warpdrive && !scsih_is_raid(&scmd->device->sdev_gendev) + && (sas_device_priv_data->flags & MPT_DEVICE_TLR_ON) && scmd->cmd_len != 32) mpi_control |= MPI2_SCSIIO_CONTROL_TLR_ON; @@ -3720,6 +3764,13 @@ scsih_qcmd(struct Scsi_Host *shost, struct scsi_cmnd *scmd) } else ioc->build_zero_len_sge(ioc, &mpi_request->SGL); +#ifdef SCSI_MPT2SAS + raid_device = sas_target_priv_data->raid_device; + if (raid_device && raid_device->direct_io_enabled) + _scsih_setup_direct_io(ioc, scmd, raid_device, mpi_request, + smid); +#endif + if (likely(mpi_request->Function == MPI2_FUNCTION_SCSI_IO_REQUEST)) { #ifndef SCSI_MPT2SAS if (sas_target_priv_data->flags & MPT_TARGET_FASTPATH_IO) { @@ -3728,7 +3779,8 @@ scsih_qcmd(struct Scsi_Host *shost, struct scsi_cmnd *scmd) mpt3sas_base_put_smid_fast_path(ioc, smid, handle); } else #endif - mpt3sas_base_put_smid_scsi_io(ioc, smid, handle); + mpt3sas_base_put_smid_scsi_io(ioc, smid, + le16_to_cpu(mpi_request->DevHandle)); } else mpt3sas_base_put_smid_default(ioc, smid); return 0; @@ -3794,7 +3846,10 @@ _scsih_scsi_ioc_info(struct MPT3SAS_ADAPTER *ioc, struct scsi_cmnd *scmd, if (!priv_target) return; - device_str = "volume"; + if (ioc->hide_ir_msg) + device_str = "WarpDrive"; + else + device_str = "volume"; if (log_info == 0x31170000) return; @@ -4175,6 +4230,9 @@ _scsih_io_done(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index, u32 reply) u32 log_info; struct MPT3SAS_DEVICE *sas_device_priv_data; u32 response_code = 0; +#ifdef SCSI_MPT2SAS + unsigned long flags; +#endif mpi_reply = mpt3sas_base_get_reply_virt_addr(ioc, reply); scmd = _scsih_scsi_lookup_get_clear(ioc, smid); @@ -4196,6 +4254,26 @@ _scsih_io_done(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index, u32 reply) } ioc_status = le16_to_cpu(mpi_reply->IOCStatus); +#ifdef SCSI_MPT2SAS + /* + * WARPDRIVE: If direct_io is set then it is directIO, + * the failed direct I/O should be redirected to volume + */ + if (_scsih_scsi_direct_io_get(ioc, smid) && + ((ioc_status & MPI2_IOCSTATUS_MASK) + != MPI2_IOCSTATUS_SCSI_TASK_TERMINATED)) { + spin_lock_irqsave(&ioc->scsi_lookup_lock, flags); + ioc->scsi_lookup[smid - 1].scmd = scmd; + spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags); + _scsih_scsi_direct_io_set(ioc, smid, 0); + memcpy(mpi_request->CDB.CDB32, scmd->cmnd, scmd->cmd_len); + mpi_request->DevHandle = + cpu_to_le16(sas_device_priv_data->sas_target->handle); + mpt3sas_base_put_smid_scsi_io(ioc, smid, + sas_device_priv_data->sas_target->handle); + return 0; + } +#endif /* turning off TLR */ scsi_state = mpi_reply->SCSIState; if (scsi_state & MPI2_SCSI_STATE_RESPONSE_INFO_VALID) @@ -4203,7 +4281,9 @@ _scsih_io_done(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index, u32 reply) le32_to_cpu(mpi_reply->ResponseInfo) & 0xFF; if (!sas_device_priv_data->tlr_snoop_check) { sas_device_priv_data->tlr_snoop_check++; - if ((sas_device_priv_data->flags & MPT_DEVICE_TLR_ON) && + if (!ioc->is_warpdrive && + !scsih_is_raid(&scmd->device->sdev_gendev) && + (sas_device_priv_data->flags & MPT_DEVICE_TLR_ON) && response_code == MPI2_SCSITASKMGMT_RSP_INVALID_FRAME) sas_device_priv_data->flags &= ~MPT_DEVICE_TLR_ON; @@ -5110,7 +5190,9 @@ _scsih_remove_device(struct MPT3SAS_ADAPTER *ioc, sas_target_priv_data->handle = MPT3SAS_INVALID_DEVICE_HANDLE; } - mpt3sas_transport_port_remove(ioc, + + if (!ioc->hide_drives) + mpt3sas_transport_port_remove(ioc, sas_device->sas_address, sas_device->sas_address_parent); @@ -6208,7 +6290,8 @@ _scsih_sas_ir_config_change_event(struct MPT3SAS_ADAPTER *ioc, (Mpi2EventDataIrConfigChangeList_t *) fw_event->event_data; - if (ioc->logging_level & MPT_DEBUG_EVENT_WORK_TASK) + if ((ioc->logging_level & MPT_DEBUG_EVENT_WORK_TASK) && + (!ioc->hide_ir_msg)) _scsih_sas_ir_config_change_event_debug(ioc, event_data); foreign_config = (le32_to_cpu(event_data->Flags) & @@ -6226,6 +6309,7 @@ _scsih_sas_ir_config_change_event(struct MPT3SAS_ADAPTER *ioc, #endif return; } + for (i = 0; i < event_data->NumElements; i++, element++) { switch (element->ReasonCode) { @@ -6241,16 +6325,20 @@ _scsih_sas_ir_config_change_event(struct MPT3SAS_ADAPTER *ioc, le16_to_cpu(element->VolDevHandle)); break; case MPI2_EVENT_IR_CHANGE_RC_PD_CREATED: - _scsih_sas_pd_hide(ioc, element); + if (!ioc->is_warpdrive) + _scsih_sas_pd_hide(ioc, element); break; case MPI2_EVENT_IR_CHANGE_RC_PD_DELETED: - _scsih_sas_pd_expose(ioc, element); + if (!ioc->is_warpdrive) + _scsih_sas_pd_expose(ioc, element); break; case MPI2_EVENT_IR_CHANGE_RC_HIDE: - _scsih_sas_pd_add(ioc, element); + if (!ioc->is_warpdrive) + _scsih_sas_pd_add(ioc, element); break; case MPI2_EVENT_IR_CHANGE_RC_UNHIDE: - _scsih_sas_pd_delete(ioc, element); + if (!ioc->is_warpdrive) + _scsih_sas_pd_delete(ioc, element); break; } } @@ -6285,10 +6373,11 @@ _scsih_sas_ir_volume_event(struct MPT3SAS_ADAPTER *ioc, handle = le16_to_cpu(event_data->VolDevHandle); state = le32_to_cpu(event_data->NewValue); - dewtprintk(ioc, pr_info(MPT3SAS_FMT - "%s: handle(0x%04x), old(0x%08x), new(0x%08x)\n", - ioc->name, __func__, handle, - le32_to_cpu(event_data->PreviousValue), state)); + if (!ioc->hide_ir_msg) + dewtprintk(ioc, pr_info(MPT3SAS_FMT + "%s: handle(0x%04x), old(0x%08x), new(0x%08x)\n", + ioc->name, __func__, handle, + le32_to_cpu(event_data->PreviousValue), state)); switch (state) { case MPI2_RAID_VOL_STATE_MISSING: case MPI2_RAID_VOL_STATE_FAILED: @@ -6371,10 +6460,12 @@ _scsih_sas_ir_physical_disk_event(struct MPT3SAS_ADAPTER *ioc, handle = le16_to_cpu(event_data->PhysDiskDevHandle); state = le32_to_cpu(event_data->NewValue); - dewtprintk(ioc, pr_info(MPT3SAS_FMT - "%s: handle(0x%04x), old(0x%08x), new(0x%08x)\n", - ioc->name, __func__, handle, + if (!ioc->hide_ir_msg) + dewtprintk(ioc, pr_info(MPT3SAS_FMT + "%s: handle(0x%04x), old(0x%08x), new(0x%08x)\n", + ioc->name, __func__, handle, le32_to_cpu(event_data->PreviousValue), state)); + switch (state) { case MPI2_RAID_PD_STATE_ONLINE: case MPI2_RAID_PD_STATE_DEGRADED: @@ -6382,7 +6473,8 @@ _scsih_sas_ir_physical_disk_event(struct MPT3SAS_ADAPTER *ioc, case MPI2_RAID_PD_STATE_OPTIMAL: case MPI2_RAID_PD_STATE_HOT_SPARE: - set_bit(handle, ioc->pd_handles); + if (!ioc->is_warpdrive) + set_bit(handle, ioc->pd_handles); spin_lock_irqsave(&ioc->sas_device_lock, flags); sas_device = _scsih_sas_device_find_by_handle(ioc, handle); spin_unlock_irqrestore(&ioc->sas_device_lock, flags); @@ -6484,7 +6576,8 @@ _scsih_sas_ir_operation_status_event(struct MPT3SAS_ADAPTER *ioc, unsigned long flags; u16 handle; - if (ioc->logging_level & MPT_DEBUG_EVENT_WORK_TASK) + if ((ioc->logging_level & MPT_DEBUG_EVENT_WORK_TASK) && + (!ioc->hide_ir_msg)) _scsih_sas_ir_operation_status_event_debug(ioc, event_data); @@ -6655,7 +6748,7 @@ static void _scsih_mark_responding_raid_device(struct MPT3SAS_ADAPTER *ioc, u64 wwid, u16 handle) { - struct MPT3SAS_TARGET *sas_target_priv_data; + struct MPT3SAS_TARGET *sas_target_priv_data = NULL; struct scsi_target *starget; struct _raid_device *raid_device; unsigned long flags; @@ -6674,6 +6767,15 @@ _scsih_mark_responding_raid_device(struct MPT3SAS_ADAPTER *ioc, u64 wwid, starget_printk(KERN_INFO, raid_device->starget, "handle(0x%04x), wwid(0x%016llx)\n", handle, (unsigned long long)raid_device->wwid); + +#ifdef SCSI_MPT2SAS + /* + * WARPDRIVE: The handles of the PDs might have changed + * across the host reset so re-initialize the + * required data for Direct IO + */ + _scsih_init_warpdrive_properties(ioc, raid_device); +#endif spin_lock_irqsave(&ioc->raid_device_lock, flags); if (raid_device->handle == handle) { spin_unlock_irqrestore(&ioc->raid_device_lock, @@ -6743,6 +6845,7 @@ _scsih_search_responding_raid_devices(struct MPT3SAS_ADAPTER *ioc) } /* refresh the pd_handles */ + if (!ioc->is_warpdrive) { phys_disk_num = 0xFF; memset(ioc->pd_handles, 0, ioc->pd_handles_sz); while (!(mpt3sas_config_get_phys_disk_pg0(ioc, &mpi_reply, @@ -6756,6 +6859,7 @@ _scsih_search_responding_raid_devices(struct MPT3SAS_ADAPTER *ioc) handle = le16_to_cpu(pd_pg0.DevHandle); set_bit(handle, ioc->pd_handles); } + } out: pr_info(MPT3SAS_FMT "search for responding raid volumes: complete\n", ioc->name); @@ -7405,7 +7509,53 @@ mpt3sas_scsih_event_callback(struct MPT3SAS_ADAPTER *ioc, u8 msix_index, (Mpi2EventDataIrVolume_t *) mpi_reply->EventData); break; + case MPI2_EVENT_LOG_ENTRY_ADDED: + { + Mpi2EventDataLogEntryAdded_t *log_entry; + u32 *log_code; + + if (!ioc->is_warpdrive) + break; + + log_entry = (Mpi2EventDataLogEntryAdded_t *) + mpi_reply->EventData; + log_code = (u32 *)log_entry->LogData; + if (le16_to_cpu(log_entry->LogEntryQualifier) + != MPT2_WARPDRIVE_LOGENTRY) + break; + + switch (le32_to_cpu(*log_code)) { + case MPT2_WARPDRIVE_LC_SSDT: + pr_warn(MPT3SAS_FMT "WarpDrive Warning: " + "IO Throttling has occurred in the WarpDrive " + "subsystem. Check WarpDrive documentation for " + "additional details.\n", ioc->name); + break; + case MPT2_WARPDRIVE_LC_SSDLW: + pr_warn(MPT3SAS_FMT "WarpDrive Warning: " + "Program/Erase Cycles for the WarpDrive subsystem " + "in degraded range. Check WarpDrive documentation " + "for additional details.\n", ioc->name); + break; + case MPT2_WARPDRIVE_LC_SSDLF: + pr_err(MPT3SAS_FMT "WarpDrive Fatal Error: " + "There are no Program/Erase Cycles for the " + "WarpDrive subsystem. The storage device will be " + "in read-only mode. Check WarpDrive documentation " + "for additional details.\n", ioc->name); + break; + case MPT2_WARPDRIVE_LC_BRMF: + pr_err(MPT3SAS_FMT "WarpDrive Fatal Error: " + "The Backup Rail Monitor has failed on the " + "WarpDrive subsystem. Check WarpDrive " + "documentation for additional details.\n", + ioc->name); + break; + } + + break; + } case MPI2_EVENT_SAS_DEVICE_STATUS_CHANGE: case MPI2_EVENT_IR_OPERATION_STATUS: case MPI2_EVENT_SAS_DISCOVERY: @@ -7535,7 +7685,8 @@ _scsih_ir_shutdown(struct MPT3SAS_ADAPTER *ioc) mpi_request->Function = MPI2_FUNCTION_RAID_ACTION; mpi_request->Action = MPI2_RAID_ACTION_SYSTEM_SHUTDOWN_INITIATED; - pr_info(MPT3SAS_FMT "IR shutdown (sending)\n", ioc->name); + if (!ioc->hide_ir_msg) + pr_info(MPT3SAS_FMT "IR shutdown (sending)\n", ioc->name); init_completion(&ioc->scsih_cmds.done); mpt3sas_base_put_smid_default(ioc, smid); wait_for_completion_timeout(&ioc->scsih_cmds.done, 10*HZ); @@ -7548,10 +7699,11 @@ _scsih_ir_shutdown(struct MPT3SAS_ADAPTER *ioc) if (ioc->scsih_cmds.status & MPT3_CMD_REPLY_VALID) { mpi_reply = ioc->scsih_cmds.reply; - pr_info(MPT3SAS_FMT - "IR shutdown (complete): ioc_status(0x%04x), loginfo(0x%08x)\n", - ioc->name, le16_to_cpu(mpi_reply->IOCStatus), - le32_to_cpu(mpi_reply->IOCLogInfo)); + if (!ioc->hide_ir_msg) + pr_info(MPT3SAS_FMT "IR shutdown " + "(complete): ioc_status(0x%04x), loginfo(0x%08x)\n", + ioc->name, le16_to_cpu(mpi_reply->IOCStatus), + le32_to_cpu(mpi_reply->IOCLogInfo)); } out: @@ -7716,6 +7868,8 @@ _scsih_probe_boot_devices(struct MPT3SAS_ADAPTER *ioc) list_move_tail(&sas_device->list, &ioc->sas_device_list); spin_unlock_irqrestore(&ioc->sas_device_lock, flags); + if (ioc->hide_drives) + return; if (!mpt3sas_transport_port_add(ioc, handle, sas_address_parent)) { _scsih_sas_device_remove(ioc, sas_device); @@ -7769,6 +7923,9 @@ _scsih_probe_sas(struct MPT3SAS_ADAPTER *ioc) list_for_each_entry_safe(sas_device, next, &ioc->sas_device_init_list, list) { + if (ioc->hide_drives) + return; + if (!mpt3sas_transport_port_add(ioc, sas_device->handle, sas_device->sas_address_parent)) { list_del(&sas_device->list); @@ -7913,6 +8070,9 @@ void _scsih_determine_hba_mpi_version(struct MPT3SAS_ADAPTER *ioc) { switch (ioc->pdev->device) { + case MPI2_MFGPAGE_DEVID_SSS6200: + ioc->is_warpdrive = 1; + ioc->hide_ir_msg = 1; case MPI2_MFGPAGE_DEVID_SAS2004: case MPI2_MFGPAGE_DEVID_SAS2008: case MPI2_MFGPAGE_DEVID_SAS2108_1: @@ -7947,6 +8107,10 @@ _scsih_determine_hba_mpi_version(struct MPT3SAS_ADAPTER *ioc) { ioc->msix96_vector = 1; break; } + + if ((ioc->pdev->device != MPI2_MFGPAGE_DEVID_SSS6200) && + (ioc->hba_mpi_version_belonged == MPI2_VERSION)) + ioc->mfg_pg10_hide_flag = MFG_PAGE10_EXPOSE_ALL_DISKS; } /** @@ -7969,7 +8133,6 @@ scsih_probe(struct pci_dev *pdev, struct Scsi_Host *shost) list_add_tail(&ioc->list, &mpt3sas_ioc_list); ioc->shost = shost; ioc->id = mpt_ids++; - ioc->pdev = pdev; ioc->scsi_io_cb_idx = scsi_io_cb_idx; ioc->tm_cb_idx = tm_cb_idx; @@ -8062,6 +8225,23 @@ scsih_probe(struct pci_dev *pdev, struct Scsi_Host *shost) rv = -ENODEV; goto out_attach_fail; } + +#ifdef SCSI_MPT2SAS + if (ioc->is_warpdrive) { + if (ioc->mfg_pg10_hide_flag == MFG_PAGE10_EXPOSE_ALL_DISKS) + ioc->hide_drives = 0; + else if (ioc->mfg_pg10_hide_flag == MFG_PAGE10_HIDE_ALL_DISKS) + ioc->hide_drives = 1; + else { + if (_scsih_get_num_volumes(ioc)) + ioc->hide_drives = 1; + else + ioc->hide_drives = 0; + } + } else + ioc->hide_drives = 0; +#endif + rv = scsi_add_host(shost, &pdev->dev); if (rv) { pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n", @@ -8334,3 +8514,7 @@ scsih_exit(void) raid_class_release(mpt3sas_raid_template); sas_release_transport(mpt3sas_transport_template); } + +#ifdef SCSI_MPT2SAS +#include "../mpt2sas/mpt2sas_warpdrive.c" +#endif