diff --git a/drivers/scsi/mpt2sas/Kconfig b/drivers/scsi/mpt2sas/Kconfig
deleted file mode 100644
index 1356a0a..0000000
--- a/drivers/scsi/mpt2sas/Kconfig
+++ /dev/null
@@ -1,61 +0,0 @@
-#
-# Kernel configuration file for the MPT2SAS
-#
-# This code is based on drivers/scsi/mpt2sas/Kconfig
-# Copyright (C) 2007-2014  LSI Corporation
-#  (mailto:DL-MPTFusionLinux@lsi.com)
-
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License
-# as published by the Free Software Foundation; either version 2
-# of the License, or (at your option) any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-# NO WARRANTY
-# THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
-# CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
-# LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
-# MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
-# solely responsible for determining the appropriateness of using and
-# distributing the Program and assumes all risks associated with its
-# exercise of rights under this Agreement, including but not limited to
-# the risks and costs of program errors, damage to or loss of data,
-# programs or equipment, and unavailability or interruption of operations.
-
-# DISCLAIMER OF LIABILITY
-# NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
-# DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-# DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
-# ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
-# TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
-# USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
-# HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301,
-# USA.
-
-config SCSI_MPT2SAS
-	tristate "LSI MPT Fusion SAS 2.0 Device Driver"
-	depends on PCI && SCSI
-	select SCSI_SAS_ATTRS
-	select RAID_ATTRS
-	---help---
-	This driver supports PCI-Express SAS 6Gb/s Host Adapters.
-
-config SCSI_MPT2SAS_MAX_SGE
-	int "LSI MPT Fusion Max number of SG Entries (16 - 128)"
-	depends on PCI && SCSI && SCSI_MPT2SAS
-	default "128"
-	range 16 128
-	---help---
-	This option allows you to specify the maximum number of scatter-
-	gather entries per I/O. The driver default is 128, which matches
-	SAFE_PHYS_SEGMENTS.  However, it may decreased down to 16.
-	Decreasing this parameter will reduce memory requirements
-	on a per controller instance.
diff --git a/drivers/scsi/mpt2sas/Makefile b/drivers/scsi/mpt2sas/Makefile
deleted file mode 100644
index 3771616..0000000
--- a/drivers/scsi/mpt2sas/Makefile
+++ /dev/null
@@ -1,15 +0,0 @@
-# mpt2sas makefile
-
-# share the official mpi headers from the mpt3sas driver
-ccflags-y += -I$(src)/../mpt3sas
-ccflags-y += -DSCSI_MPT2SAS
-
-# use the common object files from mpt3sas driver
-obj-$(CONFIG_SCSI_MPT2SAS) += mpt2sas.o
-mpt2sas-y +=  ../mpt3sas/mpt3sas_base.o        \
-		../mpt3sas/mpt3sas_config.o    \
-		../mpt3sas/mpt3sas_scsih.o     \
-		../mpt3sas/mpt3sas_transport.o \
-		../mpt3sas/mpt3sas_ctl.o       \
-		../mpt3sas/mpt3sas_trigger_diag.o  \
-		mpt2sas_module.o
diff --git a/drivers/scsi/mpt2sas/mpt2sas_module.c b/drivers/scsi/mpt2sas/mpt2sas_module.c
deleted file mode 100644
index d407ed0..0000000
--- a/drivers/scsi/mpt2sas/mpt2sas_module.c
+++ /dev/null
@@ -1,281 +0,0 @@
-/*
- * Scsi Host Layer for MPT (Message Passing Technology) based controllers
- *
- * Copyright (C) 2012-2014  LSI Corporation
- * Copyright (C) 2013-2015 Avago Technologies
- *  (mailto: MPT-FusionLinux.pdl@avagotech.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * NO WARRANTY
- * THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
- * CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
- * LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
- * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
- * solely responsible for determining the appropriateness of using and
- * distributing the Program and assumes all risks associated with its
- * exercise of rights under this Agreement, including but not limited to
- * the risks and costs of program errors, damage to or loss of data,
- * programs or equipment, and unavailability or interruption of operations.
-
- * DISCLAIMER OF LIABILITY
- * NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
- * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
- * USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
- * HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
-
- * You should have received a copy of the GNU General Public License
- * along with this program.
- */
-
-#include <linux/module.h>
-#include <linux/pci.h>
-#include <linux/raid_class.h>
-
-#include "mpt3sas_base.h"
-#include "mpt3sas_ctl.h"
-
-MODULE_AUTHOR(MPT3SAS_AUTHOR);
-MODULE_DESCRIPTION(MPT2SAS_DESCRIPTION);
-MODULE_LICENSE("GPL");
-MODULE_VERSION(MPT2SAS_DRIVER_VERSION);
-
-/* shost template */
-static struct scsi_host_template mpt2sas_driver_template = {
-	.module				= THIS_MODULE,
-	.name				= "Fusion MPT SAS Host",
-	.proc_name			= MPT2SAS_DRIVER_NAME,
-	.queuecommand			= scsih_qcmd,
-	.target_alloc			= scsih_target_alloc,
-	.slave_alloc			= scsih_slave_alloc,
-	.slave_configure		= scsih_slave_configure,
-	.target_destroy			= scsih_target_destroy,
-	.slave_destroy			= scsih_slave_destroy,
-	.scan_finished			= scsih_scan_finished,
-	.scan_start			= scsih_scan_start,
-	.change_queue_depth		= scsih_change_queue_depth,
-	.eh_abort_handler		= scsih_abort,
-	.eh_device_reset_handler	= scsih_dev_reset,
-	.eh_target_reset_handler	= scsih_target_reset,
-	.eh_host_reset_handler		= scsih_host_reset,
-	.bios_param			= scsih_bios_param,
-	.can_queue			= 1,
-	.this_id			= -1,
-	.sg_tablesize			= MPT2SAS_SG_DEPTH,
-	.max_sectors			= 32767,
-	.cmd_per_lun			= 7,
-	.use_clustering			= ENABLE_CLUSTERING,
-	.shost_attrs			= mpt3sas_host_attrs,
-	.sdev_attrs			= mpt3sas_dev_attrs,
-	.track_queue_depth		= 1,
-};
-
-/* raid transport support */
-static struct raid_function_template mpt2sas_raid_functions = {
-	.cookie		= &mpt2sas_driver_template,
-	.is_raid	= scsih_is_raid,
-	.get_resync	= scsih_get_resync,
-	.get_state	= scsih_get_state,
-};
-
-/*
- * The pci device ids are defined in mpi/mpi2_cnfg.h.
- */
-static const struct pci_device_id mpt2sas_pci_table[] = {
-	{ MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2004,
-		PCI_ANY_ID, PCI_ANY_ID },
-	/* Falcon ~ 2008*/
-	{ MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2008,
-		PCI_ANY_ID, PCI_ANY_ID },
-	/* Liberator ~ 2108 */
-	{ MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2108_1,
-		PCI_ANY_ID, PCI_ANY_ID },
-	{ MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2108_2,
-		PCI_ANY_ID, PCI_ANY_ID },
-	{ MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2108_3,
-		PCI_ANY_ID, PCI_ANY_ID },
-	/* Meteor ~ 2116 */
-	{ MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2116_1,
-		PCI_ANY_ID, PCI_ANY_ID },
-	{ MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2116_2,
-		PCI_ANY_ID, PCI_ANY_ID },
-	/* Thunderbolt ~ 2208 */
-	{ MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2208_1,
-		PCI_ANY_ID, PCI_ANY_ID },
-	{ MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2208_2,
-		PCI_ANY_ID, PCI_ANY_ID },
-	{ MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2208_3,
-		PCI_ANY_ID, PCI_ANY_ID },
-	{ MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2208_4,
-		PCI_ANY_ID, PCI_ANY_ID },
-	{ MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2208_5,
-		PCI_ANY_ID, PCI_ANY_ID },
-	{ MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2208_6,
-		PCI_ANY_ID, PCI_ANY_ID },
-	/* Mustang ~ 2308 */
-	{ MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2308_1,
-		PCI_ANY_ID, PCI_ANY_ID },
-	{ MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2308_2,
-		PCI_ANY_ID, PCI_ANY_ID },
-	{ MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2308_3,
-		PCI_ANY_ID, PCI_ANY_ID },
-	/* SSS6200 */
-	{ MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SSS6200,
-		PCI_ANY_ID, PCI_ANY_ID },
-	{0}	/* Terminating entry */
-};
-MODULE_DEVICE_TABLE(pci, mpt2sas_pci_table);
-
-static const struct file_operations mpt2sas_ctl_fops = {
-	.owner = THIS_MODULE,
-	.unlocked_ioctl = ctl_ioctl,
-	.poll = ctl_poll,
-	.fasync = ctl_fasync,
-#ifdef CONFIG_COMPAT
-	.compat_ioctl = ctl_ioctl_compat,
-#endif
-	.llseek = noop_llseek,
-};
-
-static struct miscdevice mpt2sas_ctl_dev = {
-	.minor  = MPT2SAS_MINOR,
-	.name   = MPT2SAS_DEV_NAME,
-	.fops   = &mpt2sas_ctl_fops,
-};
-
-/**
- * mpt2sas_ctl_init - main entry point for ctl.
- *
- */
-void
-mpt2sas_ctl_init(void)
-{
-	ctl_init();
-	if (misc_register(&mpt2sas_ctl_dev) < 0)
-		pr_err("%s can't register misc device [minor=%d]\n",
-		    MPT2SAS_DRIVER_NAME, MPT2SAS_MINOR);
-}
-
-/**
- * mpt2sas_ctl_exit - exit point for ctl
- *
- */
-void
-mpt2sas_ctl_exit(void)
-{
-	ctl_exit();
-	misc_deregister(&mpt2sas_ctl_dev);
-}
-
-/**
- * _mpt2sas_probe - attach and add scsi host
- * @pdev: PCI device struct
- * @id: pci device id
- *
- * Returns 0 success, anything else error.
- */
-static int
-_mpt2sas_probe(struct pci_dev *pdev, const struct pci_device_id *id)
-{
-	struct Scsi_Host *shost;
-	int rv;
-
-	shost = scsi_host_alloc(&mpt2sas_driver_template,
-			    sizeof(struct MPT3SAS_ADAPTER));
-	if (!shost)
-		return -ENODEV;
-
-	sprintf(driver_name, "%s", MPT2SAS_DRIVER_NAME);
-	rv = scsih_probe(pdev, shost);
-	return rv;
-}
-
-static struct pci_error_handlers _mpt2sas_err_handler = {
-	.error_detected = scsih_pci_error_detected,
-	.mmio_enabled = scsih_pci_mmio_enabled,
-	.slot_reset =   scsih_pci_slot_reset,
-	.resume =       scsih_pci_resume,
-};
-
-static struct pci_driver mpt2sas_driver = {
-	.name		= MPT2SAS_DRIVER_NAME,
-	.id_table	= mpt2sas_pci_table,
-	.probe		= _mpt2sas_probe,
-	.remove		= scsih_remove,
-	.shutdown	= scsih_shutdown,
-	.err_handler	= &_mpt2sas_err_handler,
-#ifdef CONFIG_PM
-	.suspend	= scsih_suspend,
-	.resume		= scsih_resume,
-#endif
-};
-
-/**
- * _mpt2sas_init - main entry point for this driver.
- *
- * Returns 0 success, anything else error.
- */
-static int __init
-_mpt2sas_init(void)
-{
-	int error;
-
-	pr_info("%s version %s loaded\n", MPT2SAS_DRIVER_NAME,
-					MPT2SAS_DRIVER_VERSION);
-
-	mpt3sas_transport_template =
-	    sas_attach_transport(&mpt3sas_transport_functions);
-	if (!mpt3sas_transport_template)
-		return -ENODEV;
-
-	mpt3sas_raid_template = raid_class_attach(&mpt2sas_raid_functions);
-	if (!mpt3sas_raid_template) {
-		sas_release_transport(mpt3sas_transport_template);
-		return -ENODEV;
-	}
-
-	error = scsih_init();
-	if (error) {
-		scsih_exit();
-		return error;
-	}
-
-	mpt2sas_ctl_init();
-
-	error = pci_register_driver(&mpt2sas_driver);
-	if (error)
-		scsih_exit();
-
-	return error;
-}
-
-/**
- * _mpt2sas_exit - exit point for this driver (when it is a module).
- *
- */
-static void __exit
-_mpt2sas_exit(void)
-{
-	pr_info("mpt2sas version %s unloading\n",
-				MPT2SAS_DRIVER_VERSION);
-
-	pci_unregister_driver(&mpt2sas_driver);
-
-	mpt2sas_ctl_exit();
-
-	scsih_exit();
-}
-
-module_init(_mpt2sas_init);
-module_exit(_mpt2sas_exit);
diff --git a/drivers/scsi/mpt3sas/mpt3sas_module.c b/drivers/scsi/mpt3sas/mpt3sas_module.c
deleted file mode 100644
index 322dc8d..0000000
--- a/drivers/scsi/mpt3sas/mpt3sas_module.c
+++ /dev/null
@@ -1,253 +0,0 @@
-/*
- * Scsi Host Layer for MPT (Message Passing Technology) based controllers
- *
- * Copyright (C) 2012-2014  LSI Corporation
- * Copyright (C) 2013-2015 Avago Technologies
- *  (mailto: MPT-FusionLinux.pdl@avagotech.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * NO WARRANTY
- * THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
- * CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
- * LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
- * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
- * solely responsible for determining the appropriateness of using and
- * distributing the Program and assumes all risks associated with its
- * exercise of rights under this Agreement, including but not limited to
- * the risks and costs of program errors, damage to or loss of data,
- * programs or equipment, and unavailability or interruption of operations.
-
- * DISCLAIMER OF LIABILITY
- * NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
- * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
- * USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
- * HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
-
- * You should have received a copy of the GNU General Public License
- * along with this program.
- */
-
-#include <linux/module.h>
-#include <linux/pci.h>
-#include <linux/raid_class.h>
-
-#include "mpt3sas_base.h"
-#include "mpt3sas_ctl.h"
-
-MODULE_AUTHOR(MPT3SAS_AUTHOR);
-MODULE_DESCRIPTION(MPT3SAS_DESCRIPTION);
-MODULE_LICENSE("GPL");
-MODULE_VERSION(MPT3SAS_DRIVER_VERSION);
-
-/* shost template */
-static struct scsi_host_template mpt3sas_driver_template = {
-	.module				= THIS_MODULE,
-	.name				= "Fusion MPT SAS Host",
-	.proc_name			= MPT3SAS_DRIVER_NAME,
-	.queuecommand			= scsih_qcmd,
-	.target_alloc			= scsih_target_alloc,
-	.slave_alloc			= scsih_slave_alloc,
-	.slave_configure		= scsih_slave_configure,
-	.target_destroy			= scsih_target_destroy,
-	.slave_destroy			= scsih_slave_destroy,
-	.scan_finished			= scsih_scan_finished,
-	.scan_start			= scsih_scan_start,
-	.change_queue_depth		= scsih_change_queue_depth,
-	.eh_abort_handler		= scsih_abort,
-	.eh_device_reset_handler	= scsih_dev_reset,
-	.eh_target_reset_handler	= scsih_target_reset,
-	.eh_host_reset_handler		= scsih_host_reset,
-	.bios_param			= scsih_bios_param,
-	.can_queue			= 1,
-	.this_id			= -1,
-	.sg_tablesize			= MPT3SAS_SG_DEPTH,
-	.max_sectors			= 32767,
-	.cmd_per_lun			= 7,
-	.use_clustering			= ENABLE_CLUSTERING,
-	.shost_attrs			= mpt3sas_host_attrs,
-	.sdev_attrs			= mpt3sas_dev_attrs,
-	.track_queue_depth		= 1,
-};
-
-/* raid transport support */
-static struct raid_function_template mpt3sas_raid_functions = {
-	.cookie		= &mpt3sas_driver_template,
-	.is_raid	= scsih_is_raid,
-	.get_resync	= scsih_get_resync,
-	.get_state	= scsih_get_state,
-};
-
-/*
- * The pci device ids are defined in mpi/mpi2_cnfg.h.
- */
-static const struct pci_device_id mpt3sas_pci_table[] = {
-	{ MPI2_MFGPAGE_VENDORID_LSI, MPI25_MFGPAGE_DEVID_SAS3004,
-		PCI_ANY_ID, PCI_ANY_ID },
-	{ MPI2_MFGPAGE_VENDORID_LSI, MPI25_MFGPAGE_DEVID_SAS3008,
-		PCI_ANY_ID, PCI_ANY_ID },
-	/* Invader ~ 3108 */
-	{ MPI2_MFGPAGE_VENDORID_LSI, MPI25_MFGPAGE_DEVID_SAS3108_1,
-		PCI_ANY_ID, PCI_ANY_ID },
-	{ MPI2_MFGPAGE_VENDORID_LSI, MPI25_MFGPAGE_DEVID_SAS3108_2,
-		PCI_ANY_ID, PCI_ANY_ID },
-	{ MPI2_MFGPAGE_VENDORID_LSI, MPI25_MFGPAGE_DEVID_SAS3108_5,
-		PCI_ANY_ID, PCI_ANY_ID },
-	{ MPI2_MFGPAGE_VENDORID_LSI, MPI25_MFGPAGE_DEVID_SAS3108_6,
-		PCI_ANY_ID, PCI_ANY_ID },
-	{0}     /* Terminating entry */
-};
-MODULE_DEVICE_TABLE(pci, mpt3sas_pci_table);
-
-static const struct file_operations mpt3sas_ctl_fops = {
-	.owner = THIS_MODULE,
-	.unlocked_ioctl = ctl_ioctl,
-	.poll = ctl_poll,
-	.fasync = ctl_fasync,
-#ifdef CONFIG_COMPAT
-	.compat_ioctl = ctl_ioctl_compat,
-#endif
-};
-
-static struct miscdevice mpt3sas_ctl_dev = {
-	.minor  = MPT3SAS_MINOR,
-	.name   = MPT3SAS_DEV_NAME,
-	.fops   = &mpt3sas_ctl_fops,
-};
-
-/**
- * mpt3sas_ctl_init - main entry point for ctl.
- *
- */
-void
-mpt3sas_ctl_init(void)
-{
-	ctl_init();
-	if (misc_register(&mpt3sas_ctl_dev) < 0)
-		pr_err("%s can't register misc device [minor=%d]\n",
-		    MPT3SAS_DRIVER_NAME, MPT3SAS_MINOR);
-}
-
-/**
- * mpt3sas_ctl_exit - exit point for ctl
- *
- */
-void
-mpt3sas_ctl_exit(void)
-{
-	ctl_exit();
-	misc_deregister(&mpt3sas_ctl_dev);
-}
-
-/**
- * _mpt3sas_probe - attach and add scsi host
- * @pdev: PCI device struct
- * @id: pci device id
- *
- * Returns 0 success, anything else error.
- */
-static int
-_mpt3sas_probe(struct pci_dev *pdev, const struct pci_device_id *id)
-{
-	struct Scsi_Host *shost;
-	int rv;
-
-	shost = scsi_host_alloc(&mpt3sas_driver_template,
-				sizeof(struct MPT3SAS_ADAPTER));
-	if (!shost)
-		return -ENODEV;
-
-	sprintf(driver_name, "%s", MPT3SAS_DRIVER_NAME);
-	rv = scsih_probe(pdev, shost);
-	return rv;
-}
-
-static struct pci_error_handlers _mpt3sas_err_handler = {
-	.error_detected	= scsih_pci_error_detected,
-	.mmio_enabled	= scsih_pci_mmio_enabled,
-	.slot_reset	= scsih_pci_slot_reset,
-	.resume		= scsih_pci_resume,
-};
-
-static struct pci_driver mpt3sas_driver = {
-	.name		= MPT3SAS_DRIVER_NAME,
-	.id_table	= mpt3sas_pci_table,
-	.probe		= _mpt3sas_probe,
-	.remove		= scsih_remove,
-	.shutdown	= scsih_shutdown,
-	.err_handler	= &_mpt3sas_err_handler,
-#ifdef CONFIG_PM
-	.suspend	= scsih_suspend,
-	.resume		= scsih_resume,
-#endif
-};
-
-/**
- * _mpt3sas_init - main entry point for this driver.
- *
- * Returns 0 success, anything else error.
- */
-static int __init
-_mpt3sas_init(void)
-{
-	int error;
-
-	pr_info("%s version %s loaded\n", MPT3SAS_DRIVER_NAME,
-					MPT3SAS_DRIVER_VERSION);
-
-	mpt3sas_transport_template =
-	    sas_attach_transport(&mpt3sas_transport_functions);
-	if (!mpt3sas_transport_template)
-		return -ENODEV;
-
-	mpt3sas_raid_template = raid_class_attach(&mpt3sas_raid_functions);
-	if (!mpt3sas_raid_template) {
-		sas_release_transport(mpt3sas_transport_template);
-		return -ENODEV;
-	}
-
-	error = scsih_init();
-	if (error) {
-		scsih_exit();
-		return error;
-	}
-
-	mpt3sas_ctl_init();
-
-	error = pci_register_driver(&mpt3sas_driver);
-	if (error)
-		scsih_exit();
-
-	return error;
-}
-
-/**
- * _mpt3sas_exit - exit point for this driver (when it is a module).
- *
- */
-static void __exit
-_mpt3sas_exit(void)
-{
-	pr_info("mpt3sas version %s unloading\n",
-				MPT3SAS_DRIVER_VERSION);
-
-	pci_unregister_driver(&mpt3sas_driver);
-
-	mpt3sas_ctl_exit();
-
-	scsih_exit();
-}
-
-module_init(_mpt3sas_init);
-module_exit(_mpt3sas_exit);
