diff mbox

[1/5] Add P3 support, define reg & struct

Message ID 1464955904-16738-1-git-send-email-ch1102chiou@gmail.com (mailing list archive)
State Changes Requested, archived
Headers show

Commit Message

Charles Chiou June 3, 2016, 12:11 p.m. UTC 
From: Paul <paul.lyu@tw.promise.com>

1.Change ver
2.Add P3 VID & DID
2.Define device reg
3.Add P3 struct and callback

Signed-off-by: Paul <paul.lyu@tw.promise.com>
---
 drivers/scsi/stex.c | 32 ++++++++++++++++++++++++++++++--
 1 file changed, 30 insertions(+), 2 deletions(-)

Comments

James Bottomley June 3, 2016, 1:04 p.m. UTC | #1 
On Fri, 2016-06-03 at 20:11 +0800, Charles Chiou wrote:
> From: Paul <paul.lyu@tw.promise.com>
> 
> 1.Change ver
> 2.Add P3 VID & DID
> 2.Define device reg
> 3.Add P3 struct and callback
> 
> Signed-off-by: Paul <paul.lyu@tw.promise.com>

If you're sending the patches, this needs your signoff as well.

Also, it looks like these 5 all need to be applied as one, so can you
send a change log for the combined patch set saying what it is and what
it does (basically, what is the P3 and how does it differ from previous
stex models?)

Thanks,

James


--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/drivers/scsi/stex.c b/drivers/scsi/stex.c
index 5b23175..f8195c0 100644
--- a/drivers/scsi/stex.c
+++ b/drivers/scsi/stex.c
@@ -38,8 +38,8 @@ 
 #include <scsi/scsi_eh.h>
 
 #define DRV_NAME "stex"
-#define ST_DRIVER_VERSION	"5.00.0000.01"
-#define ST_VER_MAJOR		5
+#define ST_DRIVER_VERSION	"6.00.0000.01"
+#define ST_VER_MAJOR		6
 #define ST_VER_MINOR		00
 #define ST_OEM				0000
 #define ST_BUILD_VER		01
@@ -64,6 +64,13 @@  enum {
 	YI2H_INT_C				= 0xa0,
 	YH2I_REQ				= 0xc0,
 	YH2I_REQ_HI				= 0xc4,
+	PSCRATCH0				= 0xb0,
+	PSCRATCH1				= 0xb4,
+	PSCRATCH2				= 0xb8,
+	PSCRATCH3				= 0xbc,
+	PSCRATCH4				= 0xc8,
+	MAILBOX_BASE			= 0x1000,
+	MAILBOX_HNDSHK_STS		= 0x0,
 
 	/* MU register value */
 	MU_INBOUND_DOORBELL_HANDSHAKE		= (1 << 0),
@@ -135,6 +142,7 @@  enum {
 	st_yosemite				= 2,
 	st_seq					= 3,
 	st_yel					= 4,
+	st_P3					= 5,
 
 	PASSTHRU_REQ_TYPE			= 0x00000001,
 	PASSTHRU_REQ_NO_WAKEUP			= 0x00000100,
@@ -1414,6 +1422,13 @@  static struct pci_device_id stex_pci_tbl[] = {
 	/* st_yel */
 	{ 0x105a, 0x8650, 0x1033, PCI_ANY_ID, 0, 0, st_yel },
 	{ 0x105a, 0x8760, PCI_ANY_ID, PCI_ANY_ID, 0, 0, st_yel },
+
+	/* st_P3, pluto */
+	{ PCI_VENDOR_ID_PROMISE, 0x8870, PCI_VENDOR_ID_PROMISE,
+		0x8870, 0, 0, st_P3 },
+	/* st_P3, p3 */
+	{ PCI_VENDOR_ID_PROMISE, 0x8870, PCI_VENDOR_ID_PROMISE,
+		0x4300, 0, 0, st_P3 },
 	{ }	/* terminate list */
 };
 
@@ -1482,6 +1497,19 @@  static struct st_card_info stex_card_info[] = {
 		.map_sg		= stex_ss_map_sg,
 		.send		= stex_ss_send_cmd,
 	},
+
+	/* st_P3 */
+	{
+		.max_id		= 129,
+		.max_lun	= 256,
+		.max_channel	= 0,
+		.rq_count	= 801,
+		.rq_size	= 512,
+		.sts_count	= 801,
+		.alloc_rq	= stex_ss_alloc_req,
+		.map_sg		= stex_ss_map_sg,
+		.send		= stex_ss_send_cmd,
+	},
 };
 
 static int stex_set_dma_mask(struct pci_dev * pdev)