[v3,07/12] scsi: ufs: set default UFS power management level

Commit Message

[e-mail] Dec. 23, 2016, 2:41 a.m. UTC

UFS device and link can be put in multiple different low power modes hence
UFS driver supports multiple different low power modes.
This change sets the default UFS power management level which should put
the link hibernate state and device in sleep state. This default power
management level gives good  power savings with relatively less enter/exit
latencies.

Reviewed-by: Yaniv Gardi <[e-mail]>
Signed-off-by: Subhash Jadavani <[e-mail]>
---
Changes from v2 -> v3:
 - Simplified patch to just set the default power management level.
   Device tree capability to specify broken hardware will be taken up as
   separate patch in different patch series than current one.
---
 drivers/scsi/ufs/ufshcd.c | 28 ++++++++++++++++++++++++++++
 1 file changed, 28 insertions(+)

Patch

diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index 30ee04a..12a2250 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -191,6 +191,22 @@  enum {
 	return ufs_pm_lvl_states[lvl].link_state;
 }
 
+static inline enum ufs_pm_level
+ufs_get_desired_pm_lvl_for_dev_link_state(enum ufs_dev_pwr_mode dev_state,
+					enum uic_link_state link_state)
+{
+	enum ufs_pm_level lvl;
+
+	for (lvl = UFS_PM_LVL_0; lvl < UFS_PM_LVL_MAX; lvl++) {
+		if ((ufs_pm_lvl_states[lvl].dev_state == dev_state) &&
+			(ufs_pm_lvl_states[lvl].link_state == link_state))
+			return lvl;
+	}
+
+	/* if no match found, return the level 0 */
+	return UFS_PM_LVL_0;
+}
+
 static struct ufs_dev_fix ufs_fixups[] = {
 	/* UFS cards deviations table */
 	UFS_FIX(UFS_VENDOR_SAMSUNG, UFS_ANY_MODEL,
@@ -7264,6 +7280,18 @@  int ufshcd_init(struct ufs_hba *hba, void __iomem *mmio_base, unsigned int irq)
 		ufshcd_clkscaling_init_sysfs(hba);
 	}
 
+	/*
+	 * Set the default power management level for runtime and system PM.
+	 * Default power saving mode is to keep UFS link in Hibern8 state
+	 * and UFS device in sleep state.
+	 */
+	hba->rpm_lvl = ufs_get_desired_pm_lvl_for_dev_link_state(
+						UFS_SLEEP_PWR_MODE,
+						UIC_LINK_HIBERN8_STATE);
+	hba->spm_lvl = ufs_get_desired_pm_lvl_for_dev_link_state(
+						UFS_SLEEP_PWR_MODE,
+						UIC_LINK_HIBERN8_STATE);
+
 	/* Hold auto suspend until async scan completes */
 	pm_runtime_get_sync(dev);