[2/3] scsi: arcmsr: Add slave_configure callback function to set device command timeout value

Commit Message

ching Huang May 7, 2018, 6:57 a.m. UTC

From Ching Huang <[e-mail]>

Add slave_configure callback function to set device command timeout value

Signed-off-by: Ching Huang <[e-mail]>
---

Patch

diff --git a/drivers/scsi/arcmsr/arcmsr_hba.c b/drivers/scsi/arcmsr/arcmsr_hba.c
index f6ddaec..79a4487 100755
--- a/drivers/scsi/arcmsr/arcmsr_hba.c
+++ b/drivers/scsi/arcmsr/arcmsr_hba.c
@@ -139,6 +139,7 @@  static irqreturn_t arcmsr_interrupt(struct AdapterControlBlock *acb);
 static void arcmsr_free_irq(struct pci_dev *, struct AdapterControlBlock *);
 static void arcmsr_wait_firmware_ready(struct AdapterControlBlock *acb);
 static void arcmsr_set_iop_datetime(struct timer_list *);
+static int arcmsr_slave_config(struct scsi_device *sdev);
 static int arcmsr_adjust_disk_queue_depth(struct scsi_device *sdev, int queue_depth)
 {
 	if (queue_depth > ARCMSR_MAX_CMD_PERLUN)
@@ -154,6 +155,7 @@  static struct scsi_host_template arcmsr_scsi_host_template = {
 	.eh_abort_handler	= arcmsr_abort,
 	.eh_bus_reset_handler	= arcmsr_bus_reset,
 	.bios_param		= arcmsr_bios_param,
+	.slave_configure	= arcmsr_slave_config,
 	.change_queue_depth	= arcmsr_adjust_disk_queue_depth,
 	.can_queue		= ARCMSR_DEFAULT_OUTSTANDING_CMD,
 	.this_id		= ARCMSR_SCSI_INITIATOR_ID,
@@ -3033,6 +3035,17 @@  static int arcmsr_queue_command_lck(struct scsi_cmnd *cmd,
 
 static DEF_SCSI_QCMD(arcmsr_queue_command)
 
+static int arcmsr_slave_config(struct scsi_device *sdev)
+{
+	unsigned int	dev_timeout;
+
+	dev_timeout = sdev->request_queue->rq_timeout;
+	if ((cmd_timeout > 0) && ((cmd_timeout * HZ) > dev_timeout))
+		blk_queue_rq_timeout(sdev->request_queue, cmd_timeout * HZ);
+	arcmsr_adjust_disk_queue_depth(sdev, cmd_per_lun);
+	return 0;
+}
+
 static void arcmsr_get_adapter_config(struct AdapterControlBlock *pACB, uint32_t *rwbuffer)
 {
 	int count;