@@ -760,7 +760,6 @@ static void ipr_mask_and_clear_interrupts(struct ipr_ioa_cfg *ioa_cfg,
ioa_cfg->hrrq[i].allow_interrupts = 0;
spin_unlock(&ioa_cfg->hrrq[i]._lock);
}
- wmb();
/* Set interrupt mask to stop all new interrupts */
if (ioa_cfg->sis64)
@@ -8403,7 +8402,6 @@ static int ipr_reset_enable_ioa(struct ipr_cmnd *ipr_cmd)
ioa_cfg->hrrq[i].allow_interrupts = 1;
spin_unlock(&ioa_cfg->hrrq[i]._lock);
}
- wmb();
if (ioa_cfg->sis64) {
/* Set the adapter to the correct endian mode. */
writel(IPR_ENDIAN_SWAP_KEY, ioa_cfg->regs.endian_swap_reg);
@@ -1224,7 +1224,6 @@ static void qla24xx_chk_fcp_state(struct fc_port *sess)
void qlt_schedule_sess_for_deletion(struct fc_port *sess)
{
struct qla_tgt *tgt = sess->tgt;
- struct qla_hw_data *ha = sess->vha->hw;
unsigned long flags;
if (sess->disc_state == DSC_DELETE_PEND)
@@ -1241,16 +1240,16 @@ void qlt_schedule_sess_for_deletion(struct fc_port *sess)
return;
}
- spin_lock_irqsave(&ha->tgt.sess_lock, flags);
if (sess->deleted == QLA_SESS_DELETED)
sess->logout_on_delete = 0;
+ spin_lock_irqsave(&sess->vha->work_lock, flags);
if (sess->deleted == QLA_SESS_DELETION_IN_PROGRESS) {
- spin_unlock_irqrestore(&ha->tgt.sess_lock, flags);
+ spin_unlock_irqrestore(&sess->vha->work_lock, flags);
return;
}
sess->deleted = QLA_SESS_DELETION_IN_PROGRESS;
- spin_unlock_irqrestore(&ha->tgt.sess_lock, flags);
+ spin_unlock_irqrestore(&sess->vha->work_lock, flags);
sess->disc_state = DSC_DELETE_PEND;
@@ -5507,9 +5507,9 @@ static void __exit scsi_debug_exit(void)
int k = sdebug_add_host;
stop_all_queued();
- free_all_queued();
for (; k; k--)
sdebug_remove_adapter();
+ free_all_queued();
driver_unregister(&sdebug_driverfs_driver);
bus_unregister(&pseudo_lld_bus);
root_device_unregister(pseudo_primary);
@@ -656,7 +656,7 @@ static void scatter_data_area(struct tcmu_dev *udev,
}
static void gather_data_area(struct tcmu_dev *udev, struct tcmu_cmd *cmd,
- bool bidi)
+ bool bidi, uint32_t read_len)
{
struct se_cmd *se_cmd = cmd->se_cmd;
int i, dbi;
@@ -689,7 +689,7 @@ static void gather_data_area(struct tcmu_dev *udev, struct tcmu_cmd *cmd,
for_each_sg(data_sg, sg, data_nents, i) {
int sg_remaining = sg->length;
to = kmap_atomic(sg_page(sg)) + sg->offset;
- while (sg_remaining > 0) {
+ while (sg_remaining > 0 && read_len > 0) {
if (block_remaining == 0) {
if (from)
kunmap_atomic(from);
@@ -701,6 +701,8 @@ static void gather_data_area(struct tcmu_dev *udev, struct tcmu_cmd *cmd,
}
copy_bytes = min_t(size_t, sg_remaining,
block_remaining);
+ if (read_len < copy_bytes)
+ copy_bytes = read_len;
offset = DATA_BLOCK_SIZE - block_remaining;
tcmu_flush_dcache_range(from, copy_bytes);
memcpy(to + sg->length - sg_remaining, from + offset,
@@ -708,8 +710,11 @@ static void gather_data_area(struct tcmu_dev *udev, struct tcmu_cmd *cmd,
sg_remaining -= copy_bytes;
block_remaining -= copy_bytes;
+ read_len -= copy_bytes;
}
kunmap_atomic(to - sg->offset);
+ if (read_len == 0)
+ break;
}
if (from)
kunmap_atomic(from);
@@ -1042,6 +1047,8 @@ static void tcmu_handle_completion(struct tcmu_cmd *cmd, struct tcmu_cmd_entry *
{
struct se_cmd *se_cmd = cmd->se_cmd;
struct tcmu_dev *udev = cmd->tcmu_dev;
+ bool read_len_valid = false;
+ uint32_t read_len = se_cmd->data_length;
/*
* cmd has been completed already from timeout, just reclaim
@@ -1056,13 +1063,28 @@ static void tcmu_handle_completion(struct tcmu_cmd *cmd, struct tcmu_cmd_entry *
pr_warn("TCMU: Userspace set UNKNOWN_OP flag on se_cmd %p\n",
cmd->se_cmd);
entry->rsp.scsi_status = SAM_STAT_CHECK_CONDITION;
- } else if (entry->rsp.scsi_status == SAM_STAT_CHECK_CONDITION) {
+ goto done;
+ }
+
+ if (se_cmd->data_direction == DMA_FROM_DEVICE &&
+ (entry->hdr.uflags & TCMU_UFLAG_READ_LEN) && entry->rsp.read_len) {
+ read_len_valid = true;
+ if (entry->rsp.read_len < read_len)
+ read_len = entry->rsp.read_len;
+ }
+
+ if (entry->rsp.scsi_status == SAM_STAT_CHECK_CONDITION) {
transport_copy_sense_to_cmd(se_cmd, entry->rsp.sense_buffer);
- } else if (se_cmd->se_cmd_flags & SCF_BIDI) {
+ if (!read_len_valid )
+ goto done;
+ else
+ se_cmd->se_cmd_flags |= SCF_TREAT_READ_AS_NORMAL;
+ }
+ if (se_cmd->se_cmd_flags & SCF_BIDI) {
/* Get Data-In buffer before clean up */
- gather_data_area(udev, cmd, true);
+ gather_data_area(udev, cmd, true, read_len);
} else if (se_cmd->data_direction == DMA_FROM_DEVICE) {
- gather_data_area(udev, cmd, false);
+ gather_data_area(udev, cmd, false, read_len);
} else if (se_cmd->data_direction == DMA_TO_DEVICE) {
/* TODO: */
} else if (se_cmd->data_direction != DMA_NONE) {
@@ -1070,7 +1092,13 @@ static void tcmu_handle_completion(struct tcmu_cmd *cmd, struct tcmu_cmd_entry *
se_cmd->data_direction);
}
- target_complete_cmd(cmd->se_cmd, entry->rsp.scsi_status);
+done:
+ if (read_len_valid) {
+ pr_debug("read_len = %d\n", read_len);
+ target_complete_cmd_with_length(cmd->se_cmd,
+ entry->rsp.scsi_status, read_len);
+ } else
+ target_complete_cmd(cmd->se_cmd, entry->rsp.scsi_status);
out:
cmd->se_cmd = NULL;
@@ -1740,7 +1768,7 @@ static int tcmu_configure_device(struct se_device *dev)
/* Initialise the mailbox of the ring buffer */
mb = udev->mb_addr;
mb->version = TCMU_MAILBOX_VERSION;
- mb->flags = TCMU_MAILBOX_FLAG_CAP_OOOC;
+ mb->flags = TCMU_MAILBOX_FLAG_CAP_OOOC | TCMU_MAILBOX_FLAG_CAP_READ_LEN;
mb->cmdr_off = CMDR_OFF;
mb->cmdr_size = udev->cmdr_size;
@@ -44,6 +44,7 @@
#define TCMU_MAILBOX_VERSION 2
#define ALIGN_SIZE 64 /* Should be enough for most CPUs */
#define TCMU_MAILBOX_FLAG_CAP_OOOC (1 << 0) /* Out-of-order completions */
+#define TCMU_MAILBOX_FLAG_CAP_READ_LEN (1 << 1) /* Read data length */
struct tcmu_mailbox {
__u16 version;
@@ -71,6 +72,7 @@ struct tcmu_cmd_entry_hdr {
__u16 cmd_id;
__u8 kflags;
#define TCMU_UFLAG_UNKNOWN_OP 0x1
+#define TCMU_UFLAG_READ_LEN 0x2
__u8 uflags;
} __packed;
@@ -119,7 +121,7 @@ struct tcmu_cmd_entry {
__u8 scsi_status;
__u8 __pad1;
__u16 __pad2;
- __u32 __pad3;
+ __u32 read_len;
char sense_buffer[TCMU_SENSE_BUFFERSIZE];
} rsp;
};
Three small bug fixes (barrier elimination, memory leak on unload, spinlock recursion) and a technical enhancement left over from the merge window: the TCMU read length support is required for tape devices read when the length of the read is greater than the tape block size. The patch is available here: git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi.git scsi-fixes The short changelog is: Arnd Bergmann (1): scsi: ipr: Eliminate duplicate barriers Luis Henriques (1): scsi: scsi_debug: Fix memory leak on module unload Mikhail Malygin (1): scsi: qla2xxx: Spinlock recursion in qla_target bstroesser@ts.fujitsu.com (1): scsi: target: tcmu: add read length support And the diffstat: drivers/scsi/ipr.c | 2 -- drivers/scsi/qla2xxx/qla_target.c | 7 +++--- drivers/scsi/scsi_debug.c | 2 +- drivers/target/target_core_user.c | 44 ++++++++++++++++++++++++++++------- include/uapi/linux/target_core_user.h | 4 +++- 5 files changed, 43 insertions(+), 16 deletions(-) With full diff below. James ---