@@ -2260,6 +2260,11 @@ base_is_prp_possible(struct MPT3SAS_ADAPTER *ioc,
bool build_prp = true;
data_length = scsi_bufflen(scmd);
+ if (pcie_device &&
+ (mpt3sas_scsih_is_pcie_scsi_device(pcie_device->device_info))) {
+ build_prp = false;
+ return build_prp;
+ }
/* If Datalenth is <= 16K and number of SGE’s entries are <= 2
* we built IEEE SGL
@@ -1735,4 +1735,20 @@ mpt3sas_setup_direct_io(struct MPT3SAS_ADAPTER *ioc, struct scsi_cmnd *scmd,
/* NCQ Prio Handling Check */
bool scsih_ncq_prio_supp(struct scsi_device *sdev);
+/**
+ * _scsih_is_pcie_scsi_device - determines if device is an pcie scsi device
+ * @device_info: bitfield providing information about the device.
+ * Context: none
+ *
+ * Returns 1 if scsi device.
+ */
+static inline int
+mpt3sas_scsih_is_pcie_scsi_device(u32 device_info)
+{
+ if ((device_info &
+ MPI26_PCIE_DEVINFO_MASK_DEVICE_TYPE) == MPI26_PCIE_DEVINFO_SCSI)
+ return 1;
+ else
+ return 0;
+}
#endif /* MPT3SAS_BASE_H_INCLUDED */
@@ -654,7 +654,6 @@ _ctl_do_mpt_command(struct MPT3SAS_ADAPTER *ioc, struct mpt3_ioctl_command karg,
size_t data_in_sz = 0;
long ret;
u16 device_handle = MPT3SAS_INVALID_DEVICE_HANDLE;
- u8 tr_method = MPI26_SCSITASKMGMT_MSGFLAGS_PROTOCOL_LVL_RST_PCIE;
issue_reset = 0;
@@ -1049,12 +1048,14 @@ _ctl_do_mpt_command(struct MPT3SAS_ADAPTER *ioc, struct mpt3_ioctl_command karg,
mpt3sas_halt_firmware(ioc);
pcie_device = mpt3sas_get_pdev_by_handle(ioc,
le16_to_cpu(mpi_request->FunctionDependent1));
- if (pcie_device && (!ioc->tm_custom_handling))
+ if (pcie_device && (!ioc->tm_custom_handling) &&
+ (!(mpt3sas_scsih_is_pcie_scsi_device(
+ pcie_device->device_info))))
mpt3sas_scsih_issue_locked_tm(ioc,
le16_to_cpu(mpi_request->FunctionDependent1),
0, MPI2_SCSITASKMGMT_TASKTYPE_TARGET_RESET, 0,
0, pcie_device->reset_timeout,
- tr_method);
+ MPI26_SCSITASKMGMT_MSGFLAGS_PROTOCOL_LVL_RST_PCIE);
else
mpt3sas_scsih_issue_locked_tm(ioc,
le16_to_cpu(mpi_request->FunctionDependent1),
@@ -1433,17 +1433,20 @@ _scsih_is_end_device(u32 device_info)
}
/**
- * _scsih_is_nvme_device - determines if device is an nvme device
+ * _scsih_is_nvme_pciescsi_device - determines if
+ * device is an pcie nvme/scsi device
* @device_info: bitfield providing information about the device.
* Context: none
*
- * Return: 1 if nvme device.
+ * Returns 1 if device is pcie device type nvme/scsi.
*/
static int
-_scsih_is_nvme_device(u32 device_info)
+_scsih_is_nvme_pciescsi_device(u32 device_info)
{
- if ((device_info & MPI26_PCIE_DEVINFO_MASK_DEVICE_TYPE)
- == MPI26_PCIE_DEVINFO_NVME)
+ if (((device_info & MPI26_PCIE_DEVINFO_MASK_DEVICE_TYPE)
+ == MPI26_PCIE_DEVINFO_NVME) ||
+ ((device_info & MPI26_PCIE_DEVINFO_MASK_DEVICE_TYPE)
+ == MPI26_PCIE_DEVINFO_SCSI))
return 1;
else
return 0;
@@ -2872,7 +2875,8 @@ scsih_abort(struct scsi_cmnd *scmd)
handle = sas_device_priv_data->sas_target->handle;
pcie_device = mpt3sas_get_pdev_by_handle(ioc, handle);
- if (pcie_device && (!ioc->tm_custom_handling))
+ if (pcie_device && (!ioc->tm_custom_handling) &&
+ (!(mpt3sas_scsih_is_pcie_scsi_device(pcie_device->device_info))))
timeout = ioc->nvme_abort_timeout;
r = mpt3sas_scsih_issue_locked_tm(ioc, handle, scmd->device->lun,
MPI2_SCSITASKMGMT_TASKTYPE_ABORT_TASK,
@@ -2943,11 +2947,13 @@ scsih_dev_reset(struct scsi_cmnd *scmd)
pcie_device = mpt3sas_get_pdev_by_handle(ioc, handle);
- if (pcie_device && (!ioc->tm_custom_handling)) {
+ if (pcie_device && (!ioc->tm_custom_handling) &&
+ (!(mpt3sas_scsih_is_pcie_scsi_device(pcie_device->device_info)))) {
tr_timeout = pcie_device->reset_timeout;
tr_method = MPI26_SCSITASKMGMT_MSGFLAGS_PROTOCOL_LVL_RST_PCIE;
} else
tr_method = MPI2_SCSITASKMGMT_MSGFLAGS_LINK_RESET;
+
r = mpt3sas_scsih_issue_locked_tm(ioc, handle, scmd->device->lun,
MPI2_SCSITASKMGMT_TASKTYPE_LOGICAL_UNIT_RESET, 0, 0,
tr_timeout, tr_method);
@@ -3020,7 +3026,8 @@ scsih_target_reset(struct scsi_cmnd *scmd)
pcie_device = mpt3sas_get_pdev_by_handle(ioc, handle);
- if (pcie_device && (!ioc->tm_custom_handling)) {
+ if (pcie_device && (!ioc->tm_custom_handling) &&
+ (!(mpt3sas_scsih_is_pcie_scsi_device(pcie_device->device_info)))) {
tr_timeout = pcie_device->reset_timeout;
tr_method = MPI26_SCSITASKMGMT_MSGFLAGS_PROTOCOL_LVL_RST_PCIE;
} else
@@ -3598,7 +3605,9 @@ _scsih_tm_tr_send(struct MPT3SAS_ADAPTER *ioc, u16 handle)
sas_address = pcie_device->wwid;
}
spin_unlock_irqrestore(&ioc->pcie_device_lock, flags);
- if (pcie_device && (!ioc->tm_custom_handling))
+ if (pcie_device && (!ioc->tm_custom_handling) &&
+ (!(mpt3sas_scsih_is_pcie_scsi_device(
+ pcie_device->device_info))))
tr_method =
MPI26_SCSITASKMGMT_MSGFLAGS_PROTOCOL_LVL_RST_PCIE;
else
@@ -6694,7 +6703,7 @@ _scsih_pcie_check_device(struct MPT3SAS_ADAPTER *ioc, u16 handle)
/* check if this is end device */
device_info = le32_to_cpu(pcie_device_pg0.DeviceInfo);
- if (!(_scsih_is_nvme_device(device_info)))
+ if (!(_scsih_is_nvme_pciescsi_device(device_info)))
return;
wwid = le64_to_cpu(pcie_device_pg0.WWID);
@@ -6803,7 +6812,8 @@ _scsih_pcie_add_device(struct MPT3SAS_ADAPTER *ioc, u16 handle)
pcie_device_pg0.AccessStatus))
return 0;
- if (!(_scsih_is_nvme_device(le32_to_cpu(pcie_device_pg0.DeviceInfo))))
+ if (!(_scsih_is_nvme_pciescsi_device(le32_to_cpu
+ (pcie_device_pg0.DeviceInfo))))
return 0;
pcie_device = mpt3sas_get_pdev_by_wwid(ioc, wwid);
@@ -6813,6 +6823,31 @@ _scsih_pcie_add_device(struct MPT3SAS_ADAPTER *ioc, u16 handle)
return 0;
}
+ /* PCIe Device Page 2 contains read-only information about a
+ * specific NVMe device; therefore, this page is only
+ * valid for NVMe devices and skip for pcie devices of type scsi.
+ */
+ if (!(mpt3sas_scsih_is_pcie_scsi_device(
+ le32_to_cpu(pcie_device_pg0.DeviceInfo)))) {
+ if (mpt3sas_config_get_pcie_device_pg2(ioc, &mpi_reply,
+ &pcie_device_pg2, MPI2_SAS_DEVICE_PGAD_FORM_HANDLE,
+ handle)) {
+ ioc_err(ioc,
+ "failure at %s:%d/%s()!\n", __FILE__,
+ __LINE__, __func__);
+ return 0;
+ }
+
+ ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
+ MPI2_IOCSTATUS_MASK;
+ if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
+ ioc_err(ioc,
+ "failure at %s:%d/%s()!\n", __FILE__,
+ __LINE__, __func__);
+ return 0;
+ }
+ }
+
pcie_device = kzalloc(sizeof(struct _pcie_device), GFP_KERNEL);
if (!pcie_device) {
ioc_err(ioc, "failure at %s:%d/%s()!\n",
@@ -6855,27 +6890,16 @@ _scsih_pcie_add_device(struct MPT3SAS_ADAPTER *ioc, u16 handle)
le64_to_cpu(enclosure_dev->pg0.EnclosureLogicalID);
}
/* TODO -- Add device name once FW supports it */
- if (mpt3sas_config_get_pcie_device_pg2(ioc, &mpi_reply,
- &pcie_device_pg2, MPI2_SAS_DEVICE_PGAD_FORM_HANDLE, handle)) {
- ioc_err(ioc, "failure at %s:%d/%s()!\n",
- __FILE__, __LINE__, __func__);
- kfree(pcie_device);
- return 0;
- }
-
- ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & MPI2_IOCSTATUS_MASK;
- if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
- ioc_err(ioc, "failure at %s:%d/%s()!\n",
- __FILE__, __LINE__, __func__);
- kfree(pcie_device);
- return 0;
- }
- pcie_device->nvme_mdts =
- le32_to_cpu(pcie_device_pg2.MaximumDataTransferSize);
- if (pcie_device_pg2.ControllerResetTO)
- pcie_device->reset_timeout =
- pcie_device_pg2.ControllerResetTO;
- else
+ if (!(mpt3sas_scsih_is_pcie_scsi_device(
+ le32_to_cpu(pcie_device_pg0.DeviceInfo)))) {
+ pcie_device->nvme_mdts =
+ le32_to_cpu(pcie_device_pg2.MaximumDataTransferSize);
+ if (pcie_device_pg2.ControllerResetTO)
+ pcie_device->reset_timeout =
+ pcie_device_pg2.ControllerResetTO;
+ else
+ pcie_device->reset_timeout = 30;
+ } else
pcie_device->reset_timeout = 30;
if (ioc->wait_for_discovery_to_complete)
@@ -8594,7 +8618,7 @@ _scsih_search_responding_pcie_devices(struct MPT3SAS_ADAPTER *ioc)
}
handle = le16_to_cpu(pcie_device_pg0.DevHandle);
device_info = le32_to_cpu(pcie_device_pg0.DeviceInfo);
- if (!(_scsih_is_nvme_device(device_info)))
+ if (!(_scsih_is_nvme_pciescsi_device(device_info)))
continue;
_scsih_mark_responding_pcie_device(ioc, &pcie_device_pg0);
}
@@ -9175,7 +9199,7 @@ _scsih_scan_for_devices_after_reset(struct MPT3SAS_ADAPTER *ioc)
break;
}
handle = le16_to_cpu(pcie_device_pg0.DevHandle);
- if (!(_scsih_is_nvme_device(
+ if (!(_scsih_is_nvme_pciescsi_device(
le32_to_cpu(pcie_device_pg0.DeviceInfo))))
continue;
pcie_device = mpt3sas_get_pdev_by_wwid(ioc,
SES device of managed PCIe switch will be enumerated same as NVMe drives. The device info type for this SES device is MPI26_PCIE_DEVINFO_SCSI (0x4), whereas the device info type for NVMe drives is MPI26_PCIE_DEVINFO_NVME (0x3). So, based on this device info type driver determines whether the device is NVMe drive or a SES device of a managed PCIe switch. This SES device doesn't have the PCIe device page 2 information like NVMe drives, so driver won't read PCIe device page 2 information for SES device. This SES device uses only IEEE SGL's, So driver build's IEEE SGL's whenever it receives any SCSI commands for this SES device. Signed-off-by: Suganath Prabu <suganath-prabu.subramani@broadcom.com> --- drivers/scsi/mpt3sas/mpt3sas_base.c | 5 ++ drivers/scsi/mpt3sas/mpt3sas_base.h | 16 +++++++ drivers/scsi/mpt3sas/mpt3sas_ctl.c | 7 +-- drivers/scsi/mpt3sas/mpt3sas_scsih.c | 92 +++++++++++++++++++++++------------- 4 files changed, 83 insertions(+), 37 deletions(-)