[GIT,PULL] SCSI fixes for 6.5-rc4

Commit Message

James Bottomley July 31, 2023, 5:55 p.m. UTC

Three small fixes, all in drivers.

The patch is available here:

git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi.git scsi-fixes

The short changelog is:

Michael Kelley (1):
      scsi: storvsc: Limit max_sectors for virtual Fibre Channel devices

Steffen Maier (1):
      scsi: zfcp: Defer fc_rport blocking until after ADISC response

Yang Yingliang (1):
      scsi: pm80xx: Fix error return code in pm8001_pci_probe()


And the diffstat:

 drivers/s390/scsi/zfcp_fc.c       | 6 +-----
 drivers/scsi/pm8001/pm8001_init.c | 3 ++-
 drivers/scsi/storvsc_drv.c        | 4 ++++
 3 files changed, 7 insertions(+), 6 deletions(-)

With full diff below.

James

---

Comments

[e-mail] Aug. 2, 2023, 6:48 p.m. UTC | #1

The pull request you sent on Mon, 31 Jul 2023 13:55:48 -0400:

> git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi.git scsi-fixes

has been merged into torvalds/linux.git:
https://git.kernel.org/torvalds/c/79d65ee53b968c006ad382a4d4c2dccd898706f9

Thank you!

Patch

diff --git a/drivers/s390/scsi/zfcp_fc.c b/drivers/s390/scsi/zfcp_fc.c
index f21307537829..4f0d0e55f0d4 100644
--- a/drivers/s390/scsi/zfcp_fc.c
+++ b/drivers/s390/scsi/zfcp_fc.c
@@ -534,8 +534,7 @@  static void zfcp_fc_adisc_handler(void *data)
 
 	/* re-init to undo drop from zfcp_fc_adisc() */
 	port->d_id = ntoh24(adisc_resp->adisc_port_id);
-	/* port is good, unblock rport without going through erp */
-	zfcp_scsi_schedule_rport_register(port);
+	/* port is still good, nothing to do */
  out:
 	atomic_andnot(ZFCP_STATUS_PORT_LINK_TEST, &port->status);
 	put_device(&port->dev);
@@ -595,9 +594,6 @@  void zfcp_fc_link_test_work(struct work_struct *work)
 	int retval;
 
 	set_worker_desc("zadisc%16llx", port->wwpn); /* < WORKER_DESC_LEN=24 */
-	get_device(&port->dev);
-	port->rport_task = RPORT_DEL;
-	zfcp_scsi_rport_work(&port->rport_work);
 
 	/* only issue one test command at one time per port */
 	if (atomic_read(&port->status) & ZFCP_STATUS_PORT_LINK_TEST)
diff --git a/drivers/scsi/pm8001/pm8001_init.c b/drivers/scsi/pm8001/pm8001_init.c
index 2e886c1d867d..4995e1ef4e0e 100644
--- a/drivers/scsi/pm8001/pm8001_init.c
+++ b/drivers/scsi/pm8001/pm8001_init.c
@@ -1181,7 +1181,8 @@  static int pm8001_pci_probe(struct pci_dev *pdev,
 		pm80xx_set_thermal_config(pm8001_ha);
 	}
 
-	if (pm8001_init_sas_add(pm8001_ha))
+	rc = pm8001_init_sas_add(pm8001_ha);
+	if (rc)
 		goto err_out_shost;
 	/* phy setting support for motherboard controller */
 	rc = pm8001_configure_phy_settings(pm8001_ha);
diff --git a/drivers/scsi/storvsc_drv.c b/drivers/scsi/storvsc_drv.c
index 7f12d931fe7c..f2823218670a 100644
--- a/drivers/scsi/storvsc_drv.c
+++ b/drivers/scsi/storvsc_drv.c
@@ -366,6 +366,7 @@  static void storvsc_on_channel_callback(void *context);
 #define STORVSC_FC_MAX_LUNS_PER_TARGET			255
 #define STORVSC_FC_MAX_TARGETS				128
 #define STORVSC_FC_MAX_CHANNELS				8
+#define STORVSC_FC_MAX_XFER_SIZE			((u32)(512 * 1024))
 
 #define STORVSC_IDE_MAX_LUNS_PER_TARGET			64
 #define STORVSC_IDE_MAX_TARGETS				1
@@ -2006,6 +2007,9 @@  static int storvsc_probe(struct hv_device *device,
 	 * protecting it from any weird value.
 	 */
 	max_xfer_bytes = round_down(stor_device->max_transfer_bytes, HV_HYP_PAGE_SIZE);
+	if (is_fc)
+		max_xfer_bytes = min(max_xfer_bytes, STORVSC_FC_MAX_XFER_SIZE);
+
 	/* max_hw_sectors_kb */
 	host->max_sectors = max_xfer_bytes >> 9;
 	/*